95401cb6f7
Enable most of the remaining test cases which were previously disabled. The required fixes are as follows: * cache_001_pos - No changes required. * cache_010_neg - Updated to use losetup under Linux. Loopback cache devices are allowed, ZVOLs as cache devices are not. Disabled until all the builders pass reliably. * cachefile_001_pos, cachefile_002_pos, cachefile_003_pos, cachefile_004_pos - Set set_device_dir path in cachefile.cfg, updated CPATH1 and CPATH2 to reference unique files. * zfs_clone_005_pos - Wait for udev to create volumes. * zfs_mount_007_pos - Updated mount options to expected Linux names. * zfs_mount_009_neg, zfs_mount_all_001_pos - No changes required. * zfs_unmount_005_pos, zfs_unmount_009_pos, zfs_unmount_all_001_pos - Updated to expect -f to not unmount busy mount points under Linux. * rsend_019_pos - Observed to occasionally take a long time on both 32-bit systems and the kmemleak builder. * zfs_written_property_001_pos - Switched sync(1) to sync_pool. * devices_001_pos, devices_002_neg - Updated create_dev_file() helper for Linux. * exec_002_neg.ksh - Fixed mmap_exec.c to preserve errno. Updated test case to expect EPERM from Linux as described by mmap(2). * grow_pool_001_pos - Adding missing setup.ksh and cleanup.ksh scripts from OpenZFS. * grow_replicas_001_pos.ksh - Added missing $SLICE_* variables. * history_004_pos, history_006_neg, history_008_pos - Fixed by previous commits and were not enabled. No changes required. * zfs_allow_010_pos - Added missing spaces after assorted zfs commands in delegate_common.kshlib. * inuse_* - Illumos dump device tests skipped. Remaining test cases updated to correctly create required partitions. * large_files_001_pos - Fixed largest_file.c to accept EINVAL as well as EFBIG as described in write(2). * link_count_001 - Added nproc to required commands. * umountall_001 - Updated to use umount -a. * online_offline_001_* - Pull in OpenZFS change to file_trunc.c to make the '-c 0' option run the test in a loop. Included online_offline.cfg file in all test cases. * rename_dirs_001_pos - Updated to use the rename_dir test binary, pkill restricted to exact matches and total runtime reduced. * slog_013_neg, write_dirs_002_pos - No changes required. * slog_013_pos.ksh - Updated to use losetup under Linux. * slog_014_pos.ksh - ZED will not be running, manually degrade the damaged vdev as expected. * nopwrite_varying_compression, nopwrite_volume - Forced pool sync with sync_pool to ensure up to date property values. * Fixed typos in ZED log messages. Refactored zed_* helper functions to resolve all-syslog exit=1 errors in zedlog. * zfs_copies_005_neg, zfs_get_004_pos, zpool_add_004_pos, zpool_destroy_001_pos, largest_pool_001_pos, clone_001_pos.ksh, clone_001_pos, - Skip until layering pools on zvols is solid. * largest_pool_001_pos - Limited to 7eb pool, maximum supported size in 8eb-1 on Linux. * zpool_expand_001_pos, zpool_expand_003_neg - Requires additional support from the ZED, updated skip reason. * zfs_rollback_001_pos, zfs_rollback_002_pos - Properly cleanup busy mount points under Linux between test loops. * privilege_001_pos, privilege_003_pos, rollback_003_pos, threadsappend_001_pos - Skip with log_unsupported. * snapshot_016_pos - No changes required. * snapshot_008_pos - Increased LIMIT from 512K to 2M and added sync_pool to avoid false positives. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6128 |
||
|---|---|---|
| .. | ||
| runfiles | ||
| test-runner | ||
| zfs-tests | ||
| Makefile.am | ||
| README.md | ||
ZFS Test Suite README
- Building and installing the ZFS Test Suite
The ZFS Test Suite runs under the test-runner framework. This framework is built along side the standard ZFS utilities and is included as part of zfs-test package. The zfs-test package can be built from source as follows:
$ ./configure
$ make pkg-utils
The resulting packages can be installed using the rpm or dpkg command as appropriate for your distributions. Alternately, if you have installed ZFS from a distributions repository (not from source) the zfs-test package may be provided for your distribution.
- Installed from source
$ rpm -ivh ./zfs-test*.rpm, or
$ dpkg -i ./zfs-test*.deb,
- Installed from package repository
$ yum install zfs-test
$ apt-get install zfs-test
- Running the ZFS Test Suite
The pre-requisites for running the ZFS Test Suite are:
- Three scratch disks
- Specify the disks you wish to use in the $DISKS variable, as a space delimited list like this: DISKS='vdb vdc vdd'. By default the zfs-tests.sh sciprt will construct three loopback devices to be used for testing: DISKS='loop0 loop1 loop2'.
- A non-root user with a full set of basic privileges and the ability to sudo(8) to root without a password to run the test.
- Specify any pools you wish to preserve as a space delimited list in the $KEEP variable. All pools detected at the start of testing are added automatically.
- The ZFS Test Suite will add users and groups to test machine to verify functionality. Therefore it is strongly advised that a dedicated test machine, which can be a VM, be used for testing.
Once the pre-requisites are satisfied simply run the zfs-tests.sh script:
$ /usr/share/zfs/zfs-tests.sh
Alternately, the zfs-tests.sh script can be run from the source tree to allow developers to rapidly validate their work. In this mode the ZFS utilities and modules from the source tree will be used (rather than those installed on the system). In order to avoid certain types of failures you will need to ensure the ZFS udev rules are installed. This can be done manually or by ensuring some version of ZFS is installed on the system.
$ ./scripts/zfs-tests.sh
The following zfs-tests.sh options are supported:
-v Verbose zfs-tests.sh output When specified additional
information describing the test environment will be logged
prior to invoking test-runner. This includes the runfile
being used, the DISKS targeted, pools to keep, etc.
-q Quiet test-runner output. When specified it is passed to
test-runner(1) which causes output to be written to the
console only for tests that do not pass and the results
summary.
-x Remove all testpools, dm, lo, and files (unsafe). When
specified the script will attempt to remove any leftover
configuration from a previous test run. This includes
destroying any pools named testpool, unused DM devices,
and loopback devices backed by file-vdevs. This operation
can be DANGEROUS because it is possible that the script
will mistakenly remove a resource not related to the testing.
-k Disable cleanup after test failure. When specified the
zfs-tests.sh script will not perform any additional cleanup
when test-runner exists. This is useful when the results of
a specific test need to be preserved for further analysis.
-f Use sparse files directly instread of loopback devices for
the testing. When running in this mode certain tests will
be skipped which depend on real block devices.
-d DIR Create sparse files for vdevs in the DIR directory. By
default these files are created under /var/tmp/.
-s SIZE Use vdevs of SIZE (default: 2G)
-r RUNFILE Run tests in RUNFILE (default: linux.run)
The ZFS Test Suite allows the user to specify a subset of the tests via a runfile. The format of the runfile is explained in test-runner(1), and the files that zfs-tests.sh uses are available for reference under /usr/share/zfs/runfiles. To specify a custom runfile, use the -r option:
$ /usr/share/zfs/zfs-tests.sh -r my_tests.run
- Test results
While the ZFS Test Suite is running, one informational line is printed at the
end of each test, and a results summary is printed at the end of the run. The
results summary includes the location of the complete logs, which is logged in
the form /var/tmp/test_results/[ISO 8601 date]. A normal test run launched
with the zfs-tests.sh wrapper script will look something like this:
$ /usr/share/zfs/zfs-tests.sh -v -d /mnt
--- Configuration --- Runfile: /usr/share/zfs/runfiles/linux.run STF_TOOLS: /usr/share/zfs/test-runner STF_SUITE: /usr/share/zfs/zfs-tests FILEDIR: /mnt FILES: /mnt/file-vdev0 /mnt/file-vdev1 /mnt/file-vdev2 LOOPBACKS: /dev/loop0 /dev/loop1 /dev/loop2 DISKS: loop0 loop1 loop2 NUM_DISKS: 3 FILESIZE: 2G Keep pool(s): rpool
/usr/share/zfs/test-runner/bin/test-runner.py -c
/usr/share/zfs/runfiles/linux.run -i /usr/share/zfs/zfs-tests
Test: .../tests/functional/acl/posix/setup (run as root) [00:00] [PASS]
...470 additional tests...
Test: .../tests/functional/zvol/zvol_cli/cleanup (run as root) [00:00] [PASS]
Results Summary PASS 472
Running Time: 00:45:09 Percent passed: 100.0% Log directory: /var/tmp/test_results/20160316T181651