mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-18 18:31:00 +03:00
48ac22d855
The initramfs script was not honoring canmount=off. With this change, it does. If the administrator has asked that a filesystem not be mounted, that should be honored. As an exception, the initramfs script ignores canmount=off on the rootfs. The rootfs should not have canmount=off set either. However, mounting it anyway seems harmless because it is being asked for explicitly. The point of this exception is to avoid the risk of breaking existing systems, just in case someone has canmount=off set on their rootfs. The initramfs still mounts filesystems with canmount=noauto. This is necessary because it is typical to set that on the rootfs so that it can be cloned. Without canmount=noauto, the clones' duplicate mountpoints would conflict. This is the remainder of the fix for: https://github.com/zfsonlinux/pkg-zfs/issues/221 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Richard Laager <rlaager@wiktel.com> Closes #6897
995 lines
26 KiB
Plaintext
995 lines
26 KiB
Plaintext
# ZFS boot stub for initramfs-tools.
|
|
#
|
|
# In the initramfs environment, the /init script sources this stub to
|
|
# override the default functions in the /scripts/local script.
|
|
#
|
|
# Enable this by passing boot=zfs on the kernel command line.
|
|
#
|
|
|
|
# Source the common init script
|
|
. /etc/zfs/zfs-functions
|
|
|
|
# Paths to what we need - in the initrd, these paths are hardcoded,
|
|
# so override the defines in zfs-functions.
|
|
ZFS="@sbindir@/zfs"
|
|
ZPOOL="@sbindir@/zpool"
|
|
ZPOOL_CACHE="@sysconfdir@/zfs/zpool.cache"
|
|
export ZFS ZPOOL ZPOOL_CACHE
|
|
|
|
# This runs any scripts that should run before we start importing
|
|
# pools and mounting any filesystems.
|
|
pre_mountroot()
|
|
{
|
|
if type run_scripts > /dev/null 2>&1 && \
|
|
[ -f "/scripts/local-top" -o -d "/scripts/local-top" ]
|
|
then
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Running /scripts/local-top"
|
|
run_scripts /scripts/local-top
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
if type run_scripts > /dev/null 2>&1 && \
|
|
[ -f "/scripts/local-premount" -o -d "/scripts/local-premount" ]
|
|
then
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Running /scripts/local-premount"
|
|
run_scripts /scripts/local-premount
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
}
|
|
|
|
# If plymouth is availible, hide the splash image.
|
|
disable_plymouth()
|
|
{
|
|
if [ -x /bin/plymouth ] && /bin/plymouth --ping
|
|
then
|
|
/bin/plymouth hide-splash >/dev/null 2>&1
|
|
fi
|
|
}
|
|
|
|
# Get a ZFS filesystem property value.
|
|
get_fs_value()
|
|
{
|
|
local fs="$1"
|
|
local value=$2
|
|
|
|
"${ZFS}" get -H -ovalue $value "$fs" 2> /dev/null
|
|
}
|
|
|
|
# Find the 'bootfs' property on pool $1.
|
|
# If the property does not contain '/', then ignore this
|
|
# pool by exporting it again.
|
|
find_rootfs()
|
|
{
|
|
local pool="$1"
|
|
|
|
# If 'POOL_IMPORTED' isn't set, no pool imported and therefor
|
|
# we won't be able to find a root fs.
|
|
[ -z "${POOL_IMPORTED}" ] && return 1
|
|
|
|
# If it's already specified, just keep it mounted and exit
|
|
# User (kernel command line) must be correct.
|
|
[ -n "${ZFS_BOOTFS}" ] && return 0
|
|
|
|
# Not set, try to find it in the 'bootfs' property of the pool.
|
|
# NOTE: zpool does not support 'get -H -ovalue bootfs'...
|
|
ZFS_BOOTFS=$("${ZPOOL}" list -H -obootfs "$pool")
|
|
|
|
# Make sure it's not '-' and that it starts with /.
|
|
if [ "${ZFS_BOOTFS}" != "-" ] && \
|
|
$(get_fs_value "${ZFS_BOOTFS}" mountpoint | grep -q '^/$')
|
|
then
|
|
# Keep it mounted
|
|
POOL_IMPORTED=1
|
|
return 0
|
|
fi
|
|
|
|
# Not boot fs here, export it and later try again..
|
|
"${ZPOOL}" export "$pool"
|
|
POOL_IMPORTED=""
|
|
|
|
return 1
|
|
}
|
|
|
|
# Support function to get a list of all pools, separated with ';'
|
|
find_pools()
|
|
{
|
|
local CMD="$*"
|
|
local pools pool
|
|
|
|
pools=$($CMD 2> /dev/null | \
|
|
grep -E "pool:|^[a-zA-Z0-9]" | \
|
|
sed 's@.*: @@' | \
|
|
while read pool; do \
|
|
echo -n "$pool;"
|
|
done)
|
|
|
|
echo "${pools%%;}" # Return without the last ';'.
|
|
}
|
|
|
|
# Get a list of all availible pools
|
|
get_pools()
|
|
{
|
|
local available_pools npools
|
|
|
|
if [ -n "${ZFS_POOL_IMPORT}" ]; then
|
|
echo "$ZFS_POOL_IMPORT"
|
|
return 0
|
|
fi
|
|
|
|
# Get the base list of availible pools.
|
|
available_pools=$(find_pools "$ZPOOL" import)
|
|
|
|
# Just in case - seen it happen (that a pool isn't visable/found
|
|
# with a simple "zpool import" but only when using the "-d"
|
|
# option or setting ZPOOL_IMPORT_PATH).
|
|
if [ -d "/dev/disk/by-id" ]
|
|
then
|
|
npools=$(find_pools "$ZPOOL" import -d /dev/disk/by-id)
|
|
if [ -n "$npools" ]
|
|
then
|
|
# Because we have found extra pool(s) here, which wasn't
|
|
# found 'normally', we need to force USE_DISK_BY_ID to
|
|
# make sure we're able to actually import it/them later.
|
|
USE_DISK_BY_ID='yes'
|
|
|
|
if [ -n "$available_pools" ]
|
|
then
|
|
# Filter out duplicates (pools found with the simple
|
|
# "zpool import" but which is also found with the
|
|
# "zpool import -d ...").
|
|
npools=$(echo "$npools" | sed "s,$available_pools,,")
|
|
|
|
# Add the list to the existing list of
|
|
# available pools
|
|
available_pools="$available_pools;$npools"
|
|
else
|
|
available_pools="$npools"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# Filter out any exceptions...
|
|
if [ -n "$ZFS_POOL_EXCEPTIONS" ]
|
|
then
|
|
local found=""
|
|
local apools=""
|
|
local pool exception
|
|
OLD_IFS="$IFS" ; IFS=";"
|
|
|
|
for pool in $available_pools
|
|
do
|
|
for exception in $ZFS_POOL_EXCEPTIONS
|
|
do
|
|
[ "$pool" = "$exception" ] && continue 2
|
|
found="$pool"
|
|
done
|
|
|
|
if [ -n "$found" ]
|
|
then
|
|
if [ -n "$apools" ]
|
|
then
|
|
apools="$apools;$pool"
|
|
else
|
|
apools="$pool"
|
|
fi
|
|
fi
|
|
done
|
|
|
|
IFS="$OLD_IFS"
|
|
available_pools="$apools"
|
|
fi
|
|
|
|
# Return list of availible pools.
|
|
echo "$available_pools"
|
|
}
|
|
|
|
# Import given pool $1
|
|
import_pool()
|
|
{
|
|
local pool="$1"
|
|
local dirs dir
|
|
|
|
# Verify that the pool isn't already imported
|
|
# Make as sure as we can to not require '-f' to import.
|
|
"${ZPOOL}" status "$pool" > /dev/null 2>&1 && return 0
|
|
|
|
# For backwards compatibility, make sure that ZPOOL_IMPORT_PATH is set
|
|
# to something we can use later with the real import(s). We want to
|
|
# make sure we find all by* dirs, BUT by-vdev should be first (if it
|
|
# exists).
|
|
if [ -n "$USE_DISK_BY_ID" -a -z "$ZPOOL_IMPORT_PATH" ]
|
|
then
|
|
dirs="$(for dir in $(echo /dev/disk/by-*)
|
|
do
|
|
# Ignore by-vdev here - we want it first!
|
|
echo "$dir" | grep -q /by-vdev && continue
|
|
[ ! -d "$dir" ] && continue
|
|
|
|
echo -n "$dir:"
|
|
done | sed 's,:$,,g')"
|
|
|
|
if [ -d "/dev/disk/by-vdev" ]
|
|
then
|
|
# Add by-vdev at the beginning.
|
|
ZPOOL_IMPORT_PATH="/dev/disk/by-vdev:"
|
|
fi
|
|
|
|
# ... and /dev at the very end, just for good measure.
|
|
ZPOOL_IMPORT_PATH="$ZPOOL_IMPORT_PATH$dirs:/dev"
|
|
fi
|
|
|
|
# Needs to be exported for "zpool" to catch it.
|
|
[ -n "$ZPOOL_IMPORT_PATH" ] && export ZPOOL_IMPORT_PATH
|
|
|
|
|
|
[ "$quiet" != "y" ] && zfs_log_begin_msg \
|
|
"Importing pool '${pool}' using defaults"
|
|
|
|
ZFS_CMD="${ZPOOL} import -N ${ZPOOL_FORCE} ${ZPOOL_IMPORT_OPTS}"
|
|
ZFS_STDERR="$($ZFS_CMD "$pool" 2>&1)"
|
|
ZFS_ERROR="$?"
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
if [ -f "${ZPOOL_CACHE}" ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_begin_msg \
|
|
"Importing pool '${pool}' using cachefile."
|
|
|
|
ZFS_CMD="${ZPOOL} import -c ${ZPOOL_CACHE} -N ${ZPOOL_FORCE} ${ZPOOL_IMPORT_OPTS}"
|
|
ZFS_STDERR="$($ZFS_CMD "$pool" 2>&1)"
|
|
ZFS_ERROR="$?"
|
|
fi
|
|
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: ${ZFS_CMD} '$pool'"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "Failed to import pool '$pool'."
|
|
echo "Manually import the pool and exit."
|
|
/bin/sh
|
|
fi
|
|
fi
|
|
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
|
|
POOL_IMPORTED=1
|
|
return 0
|
|
}
|
|
|
|
# Load ZFS modules
|
|
# Loading a module in a initrd require a slightly different approach,
|
|
# with more logging etc.
|
|
load_module_initrd()
|
|
{
|
|
if [ "$ZFS_INITRD_PRE_MOUNTROOT_SLEEP" > 0 ]
|
|
then
|
|
if [ "$quiet" != "y" ]; then
|
|
zfs_log_begin_msg "Sleeping for" \
|
|
"$ZFS_INITRD_PRE_MOUNTROOT_SLEEP seconds..."
|
|
fi
|
|
sleep "$ZFS_INITRD_PRE_MOUNTROOT_SLEEP"
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
# Wait for all of the /dev/{hd,sd}[a-z] device nodes to appear.
|
|
if type wait_for_udev > /dev/null 2>&1 ; then
|
|
wait_for_udev 10
|
|
elif type wait_for_dev > /dev/null 2>&1 ; then
|
|
wait_for_dev
|
|
fi
|
|
|
|
# zpool import refuse to import without a valid /proc/self/mounts
|
|
[ ! -f /proc/self/mounts ] && mount proc /proc
|
|
|
|
# Load the module
|
|
load_module "zfs" || return 1
|
|
|
|
if [ "$ZFS_INITRD_POST_MODPROBE_SLEEP" > 0 ]
|
|
then
|
|
if [ "$quiet" != "y" ]; then
|
|
zfs_log_begin_msg "Sleeping for" \
|
|
"$ZFS_INITRD_POST_MODPROBE_SLEEP seconds..."
|
|
fi
|
|
sleep "$ZFS_INITRD_POST_MODPROBE_SLEEP"
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
# Mount a given filesystem
|
|
mount_fs()
|
|
{
|
|
local fs="$1"
|
|
local mountpoint
|
|
|
|
# Check that the filesystem exists
|
|
"${ZFS}" list -oname -tfilesystem -H "${fs}" > /dev/null 2>&1
|
|
[ "$?" -ne 0 ] && return 1
|
|
|
|
# Skip filesystems with canmount=off. The root fs should not have
|
|
# canmount=off, but ignore it for backwards compatibility just in case.
|
|
if [ "$fs" != "${ZFS_BOOTFS}" ]
|
|
then
|
|
canmount=$(get_fs_value "$fs" canmount)
|
|
[ "$canmount" = "off" ] && return 0
|
|
fi
|
|
|
|
# Need the _original_ datasets mountpoint!
|
|
mountpoint=$(get_fs_value "$fs" mountpoint)
|
|
if [ "$mountpoint" = "legacy" -o "$mountpoint" = "none" ]; then
|
|
# Can't use the mountpoint property. Might be one of our
|
|
# clones. Check the 'org.zol:mountpoint' property set in
|
|
# clone_snap() if that's usable.
|
|
mountpoint=$(get_fs_value "$fs" org.zol:mountpoint)
|
|
if [ "$mountpoint" = "legacy" -o \
|
|
"$mountpoint" = "none" -o \
|
|
"$mountpoint" = "-" ]
|
|
then
|
|
if [ "$fs" != "${ZFS_BOOTFS}" ]; then
|
|
# We don't have a proper mountpoint and this
|
|
# isn't the root fs.
|
|
return 0
|
|
else
|
|
# Last hail-mary: Hope 'rootmnt' is set!
|
|
mountpoint=""
|
|
fi
|
|
fi
|
|
|
|
if [ "$mountpoint" = "legacy" ]; then
|
|
ZFS_CMD="mount -t zfs"
|
|
else
|
|
# If it's not a legacy filesystem, it can only be a
|
|
# native one...
|
|
ZFS_CMD="mount -o zfsutil -t zfs"
|
|
fi
|
|
else
|
|
ZFS_CMD="mount -o zfsutil -t zfs"
|
|
fi
|
|
|
|
# Possibly decrypt a filesystem using native encryption.
|
|
decrypt_fs "$fs"
|
|
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Mounting '${fs}' on '${rootmnt}/${mountpoint}'"
|
|
[ -n "${ZFS_DEBUG}" ] && \
|
|
zfs_log_begin_msg "CMD: '$ZFS_CMD ${fs} ${rootmnt}/${mountpoint}'"
|
|
|
|
ZFS_STDERR=$(${ZFS_CMD} "${fs}" "${rootmnt}/${mountpoint}" 2>&1)
|
|
ZFS_ERROR=$?
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: ${ZFS_CMD} ${fs} ${rootmnt}/${mountpoint}"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "Failed to mount ${fs} on ${rootmnt}/${mountpoint}."
|
|
echo "Manually mount the filesystem and exit."
|
|
/bin/sh
|
|
else
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
# Unlock a ZFS native crypted filesystem.
|
|
decrypt_fs()
|
|
{
|
|
local fs="$1"
|
|
|
|
# If the 'zfs key' command isn't availible, exit right here.
|
|
"${ZFS}" 2>&1 | grep -q 'key -l ' || return 0
|
|
|
|
# Check if filesystem is encrypted. If not, exit right here.
|
|
[ "$(get_fs_value "$fs" encryption)" != "off" ] || return 0
|
|
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Loading crypto wrapper key for $fs"
|
|
|
|
# Just make sure that ALL crypto modules module is loaded.
|
|
# Simplest just to load all...
|
|
for mod in sun-ccm sun-gcm sun-ctr
|
|
do
|
|
[ "$quiet" != "y" ] && zfs_log_progress_msg "${mod} "
|
|
|
|
ZFS_CMD="load_module $mod"
|
|
ZFS_STDERR="$(${ZFS_CMD} 2>&1)"
|
|
ZFS_ERROR="$?"
|
|
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: $ZFS_CMD"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "Failed to load $mod module."
|
|
echo "Please verify that it is availible on the initrd image"
|
|
echo "(without it it won't be possible to unlock the filesystem)"
|
|
echo "and rerun: $ZFS_CMD"
|
|
/bin/sh
|
|
else
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
done
|
|
|
|
# If the key isn't availible, then this will fail!
|
|
ZFS_CMD="${ZFS} key -l -r $fs"
|
|
ZFS_STDERR="$(${ZFS_CMD} 2>&1)"
|
|
ZFS_ERROR="$?"
|
|
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: $ZFS_CMD"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "Failed to load zfs encryption wrapper key (s)."
|
|
echo "Please verify dataset property 'keysource' for datasets"
|
|
echo "and rerun: $ZFS_CMD"
|
|
/bin/sh
|
|
else
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
# Destroy a given filesystem.
|
|
destroy_fs()
|
|
{
|
|
local fs="$1"
|
|
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Destroying '$fs'"
|
|
|
|
ZFS_CMD="${ZFS} destroy $fs"
|
|
ZFS_STDERR="$(${ZFS_CMD} 2>&1)"
|
|
ZFS_ERROR="$?"
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: $ZFS_CMD"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "Failed to destroy '$fs'. Please make sure that '$fs' is not availible."
|
|
echo "Hint: Try: zfs destroy -Rfn $fs"
|
|
echo "If this dryrun looks good, then remove the 'n' from '-Rfn' and try again."
|
|
/bin/sh
|
|
else
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
# Clone snapshot $1 to destination filesystem $2
|
|
# Set 'canmount=noauto' and 'mountpoint=none' so that we get to keep
|
|
# manual control over it's mounting (i.e., make sure it's not automatically
|
|
# mounted with a 'zfs mount -a' in the init/systemd scripts).
|
|
clone_snap()
|
|
{
|
|
local snap="$1"
|
|
local destfs="$2"
|
|
local mountpoint="$3"
|
|
|
|
[ "$quiet" != "y" ] && zfs_log_begin_msg "Cloning '$snap' to '$destfs'"
|
|
|
|
# Clone the snapshot into a dataset we can boot from
|
|
# + We don't want this filesystem to be automatically mounted, we
|
|
# want control over this here and nowhere else.
|
|
# + We don't need any mountpoint set for the same reason.
|
|
# We use the 'org.zol:mountpoint' property to remember the mountpoint.
|
|
ZFS_CMD="${ZFS} clone -o canmount=noauto -o mountpoint=none"
|
|
ZFS_CMD="${ZFS_CMD} -o org.zol:mountpoint=${mountpoint}"
|
|
ZFS_CMD="${ZFS_CMD} $snap $destfs"
|
|
ZFS_STDERR="$(${ZFS_CMD} 2>&1)"
|
|
ZFS_ERROR="$?"
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: $ZFS_CMD"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "Failed to clone snapshot."
|
|
echo "Make sure that the any problems are corrected and then make sure"
|
|
echo "that the dataset '$destfs' exists and is bootable."
|
|
/bin/sh
|
|
else
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
# Rollback a given snapshot.
|
|
rollback_snap()
|
|
{
|
|
local snap="$1"
|
|
|
|
[ "$quiet" != "y" ] && zfs_log_begin_msg "Rollback $snap"
|
|
|
|
ZFS_CMD="${ZFS} rollback -Rf $snap"
|
|
ZFS_STDERR="$(${ZFS_CMD} 2>&1)"
|
|
ZFS_ERROR="$?"
|
|
if [ "${ZFS_ERROR}" != 0 ]
|
|
then
|
|
[ "$quiet" != "y" ] && zfs_log_failure_msg "${ZFS_ERROR}"
|
|
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: $ZFS_CMD"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "Failed to rollback snapshot."
|
|
/bin/sh
|
|
else
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
return 0
|
|
}
|
|
|
|
# Get a list of snapshots, give them as a numbered list
|
|
# to the user to choose from.
|
|
ask_user_snap()
|
|
{
|
|
local fs="$1"
|
|
local i=1
|
|
local SNAP snapnr snap debug
|
|
|
|
# We need to temporarily disable debugging. Set 'debug' so we
|
|
# remember to enabled it again.
|
|
if [ -n "${ZFS_DEBUG}" ]; then
|
|
unset ZFS_DEBUG
|
|
set +x
|
|
debug=1
|
|
fi
|
|
|
|
# Because we need the resulting snapshot, which is sent on
|
|
# stdout to the caller, we use stderr for our questions.
|
|
echo "What snapshot do you want to boot from?" > /dev/stderr
|
|
while read snap; do
|
|
echo " $i: ${snap}" > /dev/stderr
|
|
eval `echo SNAP_$i=$snap`
|
|
i=$((i + 1))
|
|
done <<EOT
|
|
$("${ZFS}" list -H -oname -tsnapshot -r "${fs}")
|
|
EOT
|
|
|
|
echo -n " Snap nr [1-$((i-1))]? " > /dev/stderr
|
|
read snapnr
|
|
|
|
# Re-enable debugging.
|
|
if [ -n "${debug}" ]; then
|
|
ZFS_DEBUG=1
|
|
set -x
|
|
fi
|
|
|
|
echo "$(eval echo "$"SNAP_$snapnr)"
|
|
}
|
|
|
|
setup_snapshot_booting()
|
|
{
|
|
local snap="$1"
|
|
local s destfs subfs mountpoint retval=0 filesystems fs
|
|
|
|
# Make sure that the snapshot specified actually exist.
|
|
if [ ! $(get_fs_value "${snap}" type) ]
|
|
then
|
|
# Snapshot does not exist (...@<null> ?)
|
|
# ask the user for a snapshot to use.
|
|
snap="$(ask_user_snap "${snap%%@*}")"
|
|
fi
|
|
|
|
# Separate the full snapshot ('$snap') into it's filesystem and
|
|
# snapshot names. Would have been nice with a split() function..
|
|
rootfs="${snap%%@*}"
|
|
snapname="${snap##*@}"
|
|
ZFS_BOOTFS="${rootfs}_${snapname}"
|
|
|
|
if ! grep -qiE '(^|[^\\](\\\\)* )(rollback)=(on|yes|1)( |$)' /proc/cmdline
|
|
then
|
|
# If the destination dataset for the clone
|
|
# already exists, destroy it. Recursivly
|
|
if [ $(get_fs_value "${rootfs}_${snapname}" type) ]; then
|
|
filesystems=$("${ZFS}" list -oname -tfilesystem -H \
|
|
-r -Sname "${ZFS_BOOTFS}")
|
|
for fs in $filesystems; do
|
|
destroy_fs "${fs}"
|
|
done
|
|
fi
|
|
fi
|
|
|
|
# Get all snapshots, recursivly (might need to clone /usr, /var etc
|
|
# as well).
|
|
for s in $("${ZFS}" list -H -oname -tsnapshot -r "${rootfs}" | \
|
|
grep "${snapname}")
|
|
do
|
|
if grep -qiE '(^|[^\\](\\\\)* )(rollback)=(on|yes|1)( |$)' /proc/cmdline
|
|
then
|
|
# Rollback snapshot
|
|
rollback_snap "$s" || retval=$((retval + 1))
|
|
else
|
|
# Setup a destination filesystem name.
|
|
# Ex: Called with 'rpool/ROOT/debian@snap2'
|
|
# rpool/ROOT/debian@snap2 => rpool/ROOT/debian_snap2
|
|
# rpool/ROOT/debian/boot@snap2 => rpool/ROOT/debian_snap2/boot
|
|
# rpool/ROOT/debian/usr@snap2 => rpool/ROOT/debian_snap2/usr
|
|
# rpool/ROOT/debian/var@snap2 => rpool/ROOT/debian_snap2/var
|
|
subfs="${s##$rootfs}"
|
|
subfs="${subfs%%@$snapname}"
|
|
|
|
destfs="${rootfs}_${snapname}" # base fs.
|
|
[ -n "$subfs" ] && destfs="${destfs}$subfs" # + sub fs.
|
|
|
|
# Get the mountpoint of the filesystem, to be used
|
|
# with clone_snap(). If legacy or none, then use
|
|
# the sub fs value.
|
|
mountpoint=$(get_fs_value "${s%%@*}" mountpoint)
|
|
if [ "$mountpoint" = "legacy" -o \
|
|
"$mountpoint" = "none" ]
|
|
then
|
|
if [ -n "${subfs}" ]; then
|
|
mountpoint="${subfs}"
|
|
else
|
|
mountpoint="/"
|
|
fi
|
|
fi
|
|
|
|
# Clone the snapshot into its own
|
|
# filesystem
|
|
clone_snap "$s" "${destfs}" "${mountpoint}" || \
|
|
retval=$((retval + 1))
|
|
fi
|
|
done
|
|
|
|
# If we haven't return yet, we have a problem...
|
|
return "${retval}"
|
|
}
|
|
|
|
# ================================================================
|
|
|
|
# This is the main function.
|
|
mountroot()
|
|
{
|
|
local snaporig snapsub destfs pool POOLS
|
|
|
|
# ----------------------------------------------------------------
|
|
# I N I T I A L S E T U P
|
|
|
|
# ------------
|
|
# Run the pre-mount scripts from /scripts/local-top.
|
|
pre_mountroot
|
|
|
|
# ------------
|
|
# Source the default setup variables.
|
|
[ -r '/etc/default/zfs' ] && . /etc/default/zfs
|
|
|
|
# ------------
|
|
# Support debug option
|
|
if grep -qiE '(^|[^\\](\\\\)* )(zfs_debug|zfs\.debug|zfsdebug)=(on|yes|1)( |$)' /proc/cmdline
|
|
then
|
|
ZFS_DEBUG=1
|
|
mkdir /var/log
|
|
#exec 2> /var/log/boot.debug
|
|
set -x
|
|
fi
|
|
|
|
# ------------
|
|
# Load ZFS module etc.
|
|
if ! load_module_initrd; then
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Failed to load ZFS modules."
|
|
echo "Manually load the modules and exit."
|
|
/bin/sh
|
|
fi
|
|
|
|
# ------------
|
|
# Look for the cache file (if any).
|
|
[ ! -f ${ZPOOL_CACHE} ] && unset ZPOOL_CACHE
|
|
|
|
# ------------
|
|
# Compatibility: 'ROOT' is for Debian GNU/Linux (etc),
|
|
# 'root' is for Redhat/Fedora (etc),
|
|
# 'REAL_ROOT' is for Gentoo
|
|
if [ -z "$ROOT" ]
|
|
then
|
|
[ -n "$root" ] && ROOT=${root}
|
|
|
|
[ -n "$REAL_ROOT" ] && ROOT=${REAL_ROOT}
|
|
fi
|
|
|
|
# ------------
|
|
# Where to mount the root fs in the initrd - set outside this script
|
|
# Compatibility: 'rootmnt' is for Debian GNU/Linux (etc),
|
|
# 'NEWROOT' is for RedHat/Fedora (etc),
|
|
# 'NEW_ROOT' is for Gentoo
|
|
if [ -z "$rootmnt" ]
|
|
then
|
|
[ -n "$NEWROOT" ] && rootmnt=${NEWROOT}
|
|
|
|
[ -n "$NEW_ROOT" ] && rootmnt=${NEW_ROOT}
|
|
fi
|
|
|
|
# ------------
|
|
# No longer set in the defaults file, but it could have been set in
|
|
# get_pools() in some circumstances. If it's something, but not 'yes',
|
|
# it's no good to us.
|
|
[ -n "$USE_DISK_BY_ID" -a "$USE_DISK_BY_ID" != 'yes' ] && \
|
|
unset USE_DISK_BY_ID
|
|
|
|
# ----------------------------------------------------------------
|
|
# P A R S E C O M M A N D L I N E O P T I O N S
|
|
|
|
# This part is the really ugly part - there's so many options and permutations
|
|
# 'out there', and if we should make this the 'primary' source for ZFS initrd
|
|
# scripting, we need/should support them all.
|
|
#
|
|
# Supports the following kernel command line argument combinations
|
|
# (in this order - first match win):
|
|
#
|
|
# rpool=<pool> (tries to finds bootfs automatically)
|
|
# bootfs=<pool>/<dataset> (uses this for rpool - first part)
|
|
# rpool=<pool> bootfs=<pool>/<dataset>
|
|
# -B zfs-bootfs=<pool>/<fs> (uses this for rpool - first part)
|
|
# rpool=rpool (default if none of the above is used)
|
|
# root=<pool>/<dataset> (uses this for rpool - first part)
|
|
# root=ZFS=<pool>/<dataset> (uses this for rpool - first part, without 'ZFS=')
|
|
# root=zfs:AUTO (tries to detect both pool and rootfs
|
|
# root=zfs:<pool>/<dataset> (uses this for rpool - first part, without 'zfs:')
|
|
#
|
|
# Option <dataset> could also be <snapshot>
|
|
|
|
# ------------
|
|
# Support force option
|
|
# In addition, setting one of zfs_force, zfs.force or zfsforce to
|
|
# 'yes', 'on' or '1' will make sure we force import the pool.
|
|
# This should (almost) never be needed, but it's here for
|
|
# completeness.
|
|
ZPOOL_FORCE=""
|
|
if grep -qiE '(^|[^\\](\\\\)* )(zfs_force|zfs\.force|zfsforce)=(on|yes|1)( |$)' /proc/cmdline
|
|
then
|
|
ZPOOL_FORCE="-f"
|
|
fi
|
|
|
|
# ------------
|
|
# Look for 'rpool' and 'bootfs' parameter
|
|
[ -n "$rpool" ] && ZFS_RPOOL="${rpool#rpool=}"
|
|
[ -n "$bootfs" ] && ZFS_BOOTFS="${bootfs#bootfs=}"
|
|
|
|
# ------------
|
|
# If we have 'ROOT' (see above), but not 'ZFS_BOOTFS', then use
|
|
# 'ROOT'
|
|
[ -n "$ROOT" -a -z "${ZFS_BOOTFS}" ] && ZFS_BOOTFS="$ROOT"
|
|
|
|
# ------------
|
|
# Check for the `-B zfs-bootfs=%s/%u,...` kind of parameter.
|
|
# NOTE: Only use the pool name and dataset. The rest is not
|
|
# supported by ZoL (whatever it's for).
|
|
if [ -z "$ZFS_RPOOL" ]
|
|
then
|
|
# The ${zfs-bootfs} variable is set at the kernel command
|
|
# line, usually by GRUB, but it cannot be referenced here
|
|
# directly because bourne variable names cannot contain a
|
|
# hyphen.
|
|
#
|
|
# Reassign the variable by dumping the environment and
|
|
# stripping the zfs-bootfs= prefix. Let the shell handle
|
|
# quoting through the eval command.
|
|
eval ZFS_RPOOL=$(set | sed -n -e 's,^zfs-bootfs=,,p')
|
|
fi
|
|
|
|
# ------------
|
|
# No root fs or pool specified - do auto detect.
|
|
if [ -z "$ZFS_RPOOL" -a -z "${ZFS_BOOTFS}" ]
|
|
then
|
|
# Do auto detect. Do this by 'cheating' - set 'root=zfs:AUTO'
|
|
# which will be caught later
|
|
ROOT=zfs:AUTO
|
|
fi
|
|
|
|
# ----------------------------------------------------------------
|
|
# F I N D A N D I M P O R T C O R R E C T P O O L
|
|
|
|
# ------------
|
|
if [ "$ROOT" = "zfs:AUTO" ]
|
|
then
|
|
# Try to detect both pool and root fs.
|
|
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Attempting to import additional pools."
|
|
|
|
# Get a list of pools available for import
|
|
if [ -n "$ZFS_RPOOL" ]
|
|
then
|
|
# We've specified a pool - check only that
|
|
POOLS=$ZFS_RPOOL
|
|
else
|
|
POOLS=$(get_pools)
|
|
fi
|
|
|
|
OLD_IFS="$IFS" ; IFS=";"
|
|
for pool in $POOLS
|
|
do
|
|
[ -z "$pool" ] && continue
|
|
|
|
import_pool "$pool"
|
|
find_rootfs "$pool"
|
|
done
|
|
IFS="$OLD_IFS"
|
|
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg $ZFS_ERROR
|
|
else
|
|
# No auto - use value from the command line option.
|
|
|
|
# Strip 'zfs:' and 'ZFS='.
|
|
ZFS_BOOTFS="${ROOT#*[:=]}"
|
|
|
|
# Stip everything after the first slash.
|
|
ZFS_RPOOL="${ZFS_BOOTFS%%/*}"
|
|
fi
|
|
|
|
# Import the pool (if not already done so in the AUTO check above).
|
|
if [ -n "$ZFS_RPOOL" -a -z "${POOL_IMPORTED}" ]
|
|
then
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Importing ZFS root pool '$ZFS_RPOOL'"
|
|
|
|
import_pool "${ZFS_RPOOL}"
|
|
find_rootfs "${ZFS_RPOOL}"
|
|
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
|
|
if [ -z "${POOL_IMPORTED}" ]
|
|
then
|
|
# No pool imported, this is serious!
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Command: $ZFS_CMD"
|
|
echo "Message: $ZFS_STDERR"
|
|
echo "Error: $ZFS_ERROR"
|
|
echo ""
|
|
echo "No pool imported. Manually import the root pool"
|
|
echo "at the command prompt and then exit."
|
|
echo "Hint: Try: zpool import -R ${rootmnt} -N ${ZFS_RPOOL}"
|
|
/bin/sh
|
|
fi
|
|
|
|
# Set elevator=noop on the root pool's vdevs' disks. ZFS already
|
|
# does this for wholedisk vdevs (for all pools), so this is only
|
|
# important for partitions.
|
|
"${ZPOOL}" status -L "${ZFS_RPOOL}" 2> /dev/null |
|
|
awk '/^\t / && !/(mirror|raidz)/ {
|
|
dev=$1;
|
|
sub(/[0-9]+$/, "", dev);
|
|
print dev
|
|
}' |
|
|
while read i
|
|
do
|
|
if [ -e "/sys/block/$i/queue/scheduler" ]
|
|
then
|
|
echo noop > "/sys/block/$i/queue/scheduler"
|
|
fi
|
|
done
|
|
|
|
|
|
# ----------------------------------------------------------------
|
|
# P R E P A R E R O O T F I L E S Y S T E M
|
|
|
|
if [ -n "${ZFS_BOOTFS}" ]
|
|
then
|
|
# Booting from a snapshot?
|
|
# Will overwrite the ZFS_BOOTFS variable like so:
|
|
# rpool/ROOT/debian@snap2 => rpool/ROOT/debian_snap2
|
|
echo "${ZFS_BOOTFS}" | grep -q '@' && \
|
|
setup_snapshot_booting "${ZFS_BOOTFS}"
|
|
fi
|
|
|
|
if [ -z "${ZFS_BOOTFS}" ]
|
|
then
|
|
# Still nothing! Let the user sort this out.
|
|
disable_plymouth
|
|
echo ""
|
|
echo "Error: Unknown root filesystem - no 'bootfs' pool property and"
|
|
echo " not specified on the kernel command line."
|
|
echo ""
|
|
echo "Manually mount the root filesystem on $rootmnt and then exit."
|
|
echo "Hint: Try: mount -o zfsutil -t zfs ${ZFS_RPOOL-rpool}/ROOT/system $rootmnt"
|
|
/bin/sh
|
|
fi
|
|
|
|
# ----------------------------------------------------------------
|
|
# M O U N T F I L E S Y S T E M S
|
|
|
|
# * Ideally, the root filesystem would be mounted like this:
|
|
#
|
|
# zpool import -R "$rootmnt" -N "$ZFS_RPOOL"
|
|
# zfs mount -o mountpoint=/ "${ZFS_BOOTFS}"
|
|
#
|
|
# but the MOUNTPOINT prefix is preserved on descendent filesystem
|
|
# after the pivot into the regular root, which later breaks things
|
|
# like `zfs mount -a` and the /proc/self/mounts refresh.
|
|
#
|
|
# * Mount additional filesystems required
|
|
# Such as /usr, /var, /usr/local etc.
|
|
# NOTE: Mounted in the order specified in the
|
|
# ZFS_INITRD_ADDITIONAL_DATASETS variable so take care!
|
|
|
|
# Go through the complete list (recursively) of all filesystems below
|
|
# the real root dataset
|
|
filesystems=$("${ZFS}" list -oname -tfilesystem -H -r "${ZFS_BOOTFS}")
|
|
for fs in $filesystems $ZFS_INITRD_ADDITIONAL_DATASETS
|
|
do
|
|
mount_fs "$fs"
|
|
done
|
|
|
|
# ------------
|
|
# Debugging information
|
|
if [ -n "${ZFS_DEBUG}" ]
|
|
then
|
|
#exec 2>&1-
|
|
|
|
echo "DEBUG: imported pools:"
|
|
"${ZPOOL}" list -H
|
|
echo
|
|
|
|
echo "DEBUG: mounted ZFS filesystems:"
|
|
mount | grep zfs
|
|
echo
|
|
|
|
echo "=> waiting for ENTER before continuing because of 'zfsdebug=1'. "
|
|
echo -n " 'c' for shell, 'r' for reboot, 'ENTER' to continue. "
|
|
read b
|
|
|
|
[ "$b" = "c" ] && /bin/sh
|
|
[ "$b" = "r" ] && reboot -f
|
|
|
|
set +x
|
|
fi
|
|
|
|
# ------------
|
|
# Run local bottom script
|
|
if type run_scripts > /dev/null 2>&1 && \
|
|
[ -f "/scripts/local-bottom" -o -d "/scripts/local-bottom" ]
|
|
then
|
|
[ "$quiet" != "y" ] && \
|
|
zfs_log_begin_msg "Running /scripts/local-bottom"
|
|
run_scripts /scripts/local-bottom
|
|
[ "$quiet" != "y" ] && zfs_log_end_msg
|
|
fi
|
|
}
|