c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-27 11:29:36 +03:00
Code Issues Packages Projects Releases Wiki Activity
81285582b9
mirror_zfs/scripts/zconfig.sh
Brian Behlendorf f74b821a66 Add zfs allow and zfs unallow support 
ZFS allows for specific permissions to be delegated to normal users
with the `zfs allow` and `zfs unallow` commands.  In addition, non-
privileged users should be able to run all of the following commands:

  * zpool [list | iostat | status | get]
  * zfs [list | get]

Historically this functionality was not available on Linux.  In order
to add it the secpolicy_* functions needed to be implemented and mapped
to the equivalent Linux capability.  Only then could the permissions on
the `/dev/zfs` be relaxed and the internal ZFS permission checks used.

Even with this change some limitations remain.  Under Linux only the
root user is allowed to modify the namespace (unless it's a private
namespace).  This means the mount, mountpoint, canmount, unmount,
and remount delegations cannot be supported with the existing code.  It
may be possible to add this functionality in the future.

This functionality was validated with the cli_user and delegation test
cases from the ZFS Test Suite.  These tests exhaustively verify each
of the supported permissions which can be delegated and ensures only
an authorized user can perform it.

Two minor bug fixes were required for test-running.py.  First, the
Timer() object cannot be safely created in a `try:` block when there
is an unconditional `finally` block which references it.  Second,
when running as a normal user also check for scripts using the
both the .ksh and .sh suffixes.

Finally, existing users who are simulating delegations by setting
group permissions on the /dev/zfs device should revert that
customization when updating to a version with this change.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #362 
Closes #434 
Closes #4100
Closes #4394 
Closes #4410 
Closes #4487
2016-06-07 09:16:52 -07:00

697 lines
21 KiB
Bash
Executable File
Raw Blame History

#!/bin/bash
#
# ZFS/ZPOOL configuration test script.
basedir="$(dirname $0)"
SCRIPT_COMMON=common.sh
if [ -f "${basedir}/${SCRIPT_COMMON}" ]; then
. "${basedir}/${SCRIPT_COMMON}"
else
echo "Missing helper script ${SCRIPT_COMMON}" && exit 1
fi
PROG=zconfig.sh
usage() {
cat << EOF
USAGE:
$0 [hvcts]
DESCRIPTION:
ZFS/ZPOOL configuration tests
OPTIONS:
-h Show this message
-v Verbose
-c Cleanup lo+file devices at start
-t <#> Run listed tests
-s <#> Skip listed tests
EOF
}
while getopts 'hvct:s:?' OPTION; do
case $OPTION in
h)
usage
exit 1
;;
v)
VERBOSE=1
;;
c)
CLEANUP=1
;;
t)
TESTS_RUN=($OPTARG)
;;
s)
TESTS_SKIP=($OPTARG)
;;
?)
usage
exit
;;
esac
done
if [ $(id -u) != 0 ]; then
die "Must run as root"
fi
# Initialize the test suite
init
# Disable the udev rule 90-zfs.rules to prevent the zfs module
# stack from being loaded due to the detection of a zfs device.
# This is important because this test scripts require full control
# over when and how the modules are loaded/unloaded. A trap is
# set to ensure the udev rule is correctly replaced on exit.
RULE=${udevruledir}/90-zfs.rules
if test -e ${RULE}; then
trap "mv ${RULE}.disabled ${RULE}" INT TERM EXIT
mv ${RULE} ${RULE}.disabled
fi
# Perform pre-cleanup is requested
if [ ${CLEANUP} ]; then
${ZFS_SH} -u
cleanup_md_devices
cleanup_loop_devices
rm -f /tmp/zpool.cache.*
fi
# Check if we need to skip the tests that require scsi_debug and lsscsi.
SCSI_DEBUG=0
${INFOMOD} scsi_debug &>/dev/null && SCSI_DEBUG=1
HAVE_LSSCSI=0
test -f ${LSSCSI} && HAVE_LSSCSI=1
if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ]; then
echo "Skipping test 10 which requires the scsi_debug " \
"module and the ${LSSCSI} utility"
fi
# Validate persistent zpool.cache configuration.
test_1() {
local POOL_NAME=test1
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool save its status for comparison.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
# Unload/load the module stack and verify the pool persists.
${ZFS_SH} -u || fail 4
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 5
${ZPOOL} import -c ${TMP_CACHE} ${POOL_NAME} || fail 5
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 6
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 7
# Cleanup the test pool and temporary files
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 8
rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_CACHE} || fail 9
${ZFS_SH} -u || fail 10
pass
}
run_test 1 "persistent zpool.cache"
# Validate ZFS disk scanning and import w/out zpool.cache configuration.
test_2() {
local POOL_NAME=test2
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool save its status for comparison.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
# Unload the module stack, remove the cache file, load the module
# stack and attempt to probe the disks to import the pool. As
# a cross check verify the old pool state against the imported.
${ZFS_SH} -u || fail 4
rm -f ${TMP_CACHE} || fail 5
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 6
${ZPOOL} import -d /dev ${POOL_NAME} || fail 8
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 9
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 10
# Cleanup the test pool and temporary files
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 11
rm -f ${TMP_FILE1} ${TMP_FILE2} || fail 12
${ZFS_SH} -u || fail 13
pass
}
run_test 2 "scan disks for pools to import"
zconfig_zvol_device_stat() {
local EXPECT=$1
local POOL_NAME=/dev/zvol/$2
local ZVOL_NAME=/dev/zvol/$3
local SNAP_NAME=/dev/zvol/$4
local CLONE_NAME=/dev/zvol/$5
local COUNT=0
# Briefly delay for udev
udev_trigger
# Pool exists
stat ${POOL_NAME} &>/dev/null && let COUNT=$COUNT+1
# Volume and partitions
stat ${ZVOL_NAME} &>/dev/null && let COUNT=$COUNT+1
stat ${ZVOL_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
stat ${ZVOL_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
# Snapshot with partitions
stat ${SNAP_NAME} &>/dev/null && let COUNT=$COUNT+1
stat ${SNAP_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
stat ${SNAP_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
# Clone with partitions
stat ${CLONE_NAME} &>/dev/null && let COUNT=$COUNT+1
stat ${CLONE_NAME}-part1 &>/dev/null && let COUNT=$COUNT+1
stat ${CLONE_NAME}-part2 &>/dev/null && let COUNT=$COUNT+1
if [ $EXPECT -ne $COUNT ]; then
return 1
fi
return 0
}
# zpool import/export device check
# (1 volume, 2 partitions, 1 snapshot, 1 clone)
test_3() {
local POOL_NAME=tank
local ZVOL_NAME=volume
local SNAP_NAME=snap
local CLONE_NAME=clone
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool, volume, partition, snapshot, and clone.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 51% -1 || fail 4
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 7
# Export the pool
${ZPOOL} export ${POOL_NAME} || fail 8
# verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 9
# Import the pool, wait 1 second for udev
${ZPOOL} import ${POOL_NAME} || fail 10
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 11
# Toggle the snapdev and observe snapshot device links toggled
${ZFS} set snapdev=hidden ${FULL_ZVOL_NAME} || fail 12
zconfig_zvol_device_stat 7 ${POOL_NAME} ${FULL_ZVOL_NAME} \
"invalid" ${FULL_CLONE_NAME} || fail 13
${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 14
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 15
# Destroy the pool and consequently the devices
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 16
# verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 17
${ZFS_SH} -u || fail 18
rm -f ${TMP_CACHE} || fail 19
pass
}
run_test 3 "zpool import/export device"
# zpool insmod/rmmod device check (1 volume, 1 snapshot, 1 clone)
test_4() {
POOL_NAME=tank
ZVOL_NAME=volume
SNAP_NAME=snap
CLONE_NAME=clone
FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool, volume, snapshot, and clone
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 100M ${FULL_ZVOL_NAME} || fail 3
${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1% 50% || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 51% -1 || fail 4
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 5
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 6
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 7
# Unload the modules
${ZFS_SH} -u || fail 8
# Verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 9
# Load the modules, list the pools to ensure they are opened
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 10
${ZPOOL} import -c ${TMP_CACHE} ${POOL_NAME} || fail 10
${ZPOOL} list &>/dev/null
# Verify the devices were created
zconfig_zvol_device_stat 10 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 11
# Destroy the pool and consequently the devices
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 12
# Verify the devices were removed
zconfig_zvol_device_stat 0 ${POOL_NAME} ${FULL_ZVOL_NAME} \
${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 13
${ZFS_SH} -u || fail 14
rm -f ${TMP_CACHE} || fail 15
pass
}
run_test 4 "zpool insmod/rmmod device"
# ZVOL volume sanity check
test_5() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local FULL_NAME=${POOL_NAME}/${ZVOL_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
${ZFS} create -V 800M ${FULL_NAME} || fail 3
label /dev/zvol/${FULL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_NAME} primary 1 -1 || fail 4
format /dev/zvol/${FULL_NAME}-part1 ext2 || fail 5
# Mount the ext2 filesystem and copy some data to it.
mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
mount /dev/zvol/${FULL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 || fail 7
cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 8
sync
# Verify the copied files match the original files.
diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
&>/dev/null || fail 9
# Remove the files, umount, destroy the volume and pool.
rm -Rf /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} || fail 10
umount /tmp/${ZVOL_NAME}-part1 || fail 11
rmdir /tmp/${ZVOL_NAME}-part1 || fail 12
${ZFS} destroy ${FULL_NAME} || fail 13
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 14
${ZFS_SH} -u || fail 15
rm -f ${TMP_CACHE} || fail 16
pass
}
run_test 5 "zvol+ext2 volume"
# ZVOL snapshot sanity check
test_6() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local SNAP_NAME=pristine
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raid0 || fail 2
${ZFS} create -V 800M ${FULL_ZVOL_NAME} || fail 3
${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
# Mount the ext2 filesystem and copy some data to it.
mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 6
mount /dev/zvol/${FULL_ZVOL_NAME}-part1 /tmp/${ZVOL_NAME}-part1 \
|| fail 7
# Snapshot the pristine ext2 filesystem and mount it read-only.
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 8
mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
mount /dev/zvol/${FULL_SNAP_NAME}-part1 /tmp/${SNAP_NAME}-part1 \
&>/dev/null || fail 10
# Copy to original volume
cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
sync
# Verify the copied files match the original files,
# and the copied files do NOT appear in the snapshot.
diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
&>/dev/null || fail 12
diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1/${SRC_DIR##*/} \
&>/dev/null && fail 13
# umount, destroy the snapshot, volume, and pool.
umount /tmp/${SNAP_NAME}-part1 || fail 14
rmdir /tmp/${SNAP_NAME}-part1 || fail 15
${ZFS} destroy ${FULL_SNAP_NAME} || fail 16
umount /tmp/${ZVOL_NAME}-part1 || fail 17
rmdir /tmp/${ZVOL_NAME}-part1 || fail 18
${ZFS} destroy ${FULL_ZVOL_NAME} || fail 19
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 20
${ZFS_SH} -u || fail 21
rm -f ${TMP_CACHE} || fail 22
pass
}
run_test 6 "zvol+ext2 snapshot"
# ZVOL clone sanity check
test_7() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local SNAP_NAME=pristine
local CLONE_NAME=clone
local FULL_ZVOL_NAME=${POOL_NAME}/${ZVOL_NAME}
local FULL_SNAP_NAME=${POOL_NAME}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_CLONE_NAME=${POOL_NAME}/${CLONE_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 300M ${FULL_ZVOL_NAME} || fail 3
${ZFS} set snapdev=visible ${FULL_ZVOL_NAME} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME} primary 1 -1 || fail 4
format /dev/zvol/${FULL_ZVOL_NAME}-part1 ext2 || fail 5
# Snapshot the pristine ext2 filesystem.
${ZFS} snapshot ${FULL_SNAP_NAME} || fail 6
wait_udev /dev/zvol/${FULL_SNAP_NAME}-part1 30 || fail 7
# Mount the ext2 filesystem so some data can be copied to it.
mkdir -p /tmp/${ZVOL_NAME}-part1 || fail 7
mount /dev/zvol/${FULL_ZVOL_NAME}-part1 \
/tmp/${ZVOL_NAME}-part1 || fail 8
# Mount the pristine ext2 snapshot.
mkdir -p /tmp/${SNAP_NAME}-part1 || fail 9
mount /dev/zvol/${FULL_SNAP_NAME}-part1 \
/tmp/${SNAP_NAME}-part1 &>/dev/null || fail 10
# Copy to original volume.
cp -RL ${SRC_DIR} /tmp/${ZVOL_NAME}-part1 || fail 11
sync
# Verify the copied files match the original files,
# and the copied files do NOT appear in the snapshot.
diff -ur ${SRC_DIR} /tmp/${ZVOL_NAME}-part1/${SRC_DIR##*/} \
&>/dev/null || fail 12
diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}-part1/${SRC_DIR##*/} \
&>/dev/null && fail 13
# Clone from the original pristine snapshot
${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 14
wait_udev /dev/zvol/${FULL_CLONE_NAME}-part1 30 || fail 14
mkdir -p /tmp/${CLONE_NAME}-part1 || fail 15
mount /dev/zvol/${FULL_CLONE_NAME}-part1 \
/tmp/${CLONE_NAME}-part1 || fail 16
# Verify the clone matches the pristine snapshot,
# and the files copied to the original volume are NOT there.
diff -ur /tmp/${SNAP_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
&>/dev/null || fail 17
diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
&>/dev/null && fail 18
# Copy to cloned volume.
cp -RL ${SRC_DIR} /tmp/${CLONE_NAME}-part1 || fail 19
sync
# Verify the clone matches the modified original volume.
diff -ur /tmp/${ZVOL_NAME}-part1 /tmp/${CLONE_NAME}-part1 \
&>/dev/null || fail 20
# umount, destroy the snapshot, volume, and pool.
umount /tmp/${CLONE_NAME}-part1 || fail 21
rmdir /tmp/${CLONE_NAME}-part1 || fail 22
${ZFS} destroy ${FULL_CLONE_NAME} || fail 23
umount /tmp/${SNAP_NAME}-part1 || fail 24
rmdir /tmp/${SNAP_NAME}-part1 || fail 25
${ZFS} destroy ${FULL_SNAP_NAME} || fail 26
umount /tmp/${ZVOL_NAME}-part1 || fail 27
rmdir /tmp/${ZVOL_NAME}-part1 || fail 28
${ZFS} destroy ${FULL_ZVOL_NAME} || fail 29
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 30
${ZFS_SH} -u || fail 31
rm -f ${TMP_CACHE} || fail 32
pass
}
run_test 7 "zvol+ext2 clone"
# Send/Receive sanity check
test_8() {
local POOL_NAME1=tank1
local POOL_NAME2=tank2
local ZVOL_NAME=fish
local SNAP_NAME=snap
local FULL_ZVOL_NAME1=${POOL_NAME1}/${ZVOL_NAME}
local FULL_ZVOL_NAME2=${POOL_NAME2}/${ZVOL_NAME}
local FULL_SNAP_NAME1=${POOL_NAME1}/${ZVOL_NAME}@${SNAP_NAME}
local FULL_SNAP_NAME2=${POOL_NAME2}/${ZVOL_NAME}@${SNAP_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
# Create two pools and a volume
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME1} -c lo-raidz2 || fail 2
${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 || fail 2
${ZFS} create -V 300M ${FULL_ZVOL_NAME1} || fail 3
${ZFS} set snapdev=visible ${FULL_ZVOL_NAME1} || fail 3
label /dev/zvol/${FULL_ZVOL_NAME1} msdos || fail 4
partition /dev/zvol/${FULL_ZVOL_NAME1} primary 1 -1 || fail 4
format /dev/zvol/${FULL_ZVOL_NAME1}-part1 ext2 || fail 5
# Mount the ext2 filesystem and copy some data to it.
mkdir -p /tmp/${FULL_ZVOL_NAME1}-part1 || fail 6
mount /dev/zvol/${FULL_ZVOL_NAME1}-part1 \
/tmp/${FULL_ZVOL_NAME1}-part1 || fail 7
cp -RL ${SRC_DIR} /tmp/${FULL_ZVOL_NAME1}-part1 || fail 8
# Unmount, snapshot, mount the ext2 filesystem so it may be sent.
# We only unmount to ensure the ext2 filesystem is clean.
umount /tmp/${FULL_ZVOL_NAME1}-part1 || fail 9
${ZFS} snapshot ${FULL_SNAP_NAME1} || fail 10
wait_udev /dev/zvol/${FULL_SNAP_NAME1} 30 || fail 10
mount /dev/zvol/${FULL_ZVOL_NAME1}-part1 \
/tmp/${FULL_ZVOL_NAME1}-part1 || 11
# Send/receive the snapshot from POOL_NAME1 to POOL_NAME2
(${ZFS} send ${FULL_SNAP_NAME1} | \
${ZFS} receive ${FULL_ZVOL_NAME2}) || fail 12
wait_udev /dev/zvol/${FULL_ZVOL_NAME2}-part1 30 || fail 12
# Mount the sent ext2 filesystem.
mkdir -p /tmp/${FULL_ZVOL_NAME2}-part1 || fail 13
mount /dev/zvol/${FULL_ZVOL_NAME2}-part1 \
/tmp/${FULL_ZVOL_NAME2}-part1 || fail 14
# Verify the contents of the volumes match
diff -ur /tmp/${FULL_ZVOL_NAME1}-part1 /tmp/${FULL_ZVOL_NAME2}-part1 \
&>/dev/null || fail 15
# Umount, destroy the volume and pool.
umount /tmp/${FULL_ZVOL_NAME1}-part1 || fail 16
umount /tmp/${FULL_ZVOL_NAME2}-part1 || fail 17
rmdir /tmp/${FULL_ZVOL_NAME1}-part1 || fail 18
rmdir /tmp/${FULL_ZVOL_NAME2}-part1 || fail 19
rmdir /tmp/${POOL_NAME1} || fail 20
rmdir /tmp/${POOL_NAME2} || fail 21
${ZFS} destroy ${FULL_SNAP_NAME1} || fail 22
${ZFS} destroy ${FULL_SNAP_NAME2} || fail 23
${ZFS} destroy ${FULL_ZVOL_NAME1} || fail 24
${ZFS} destroy ${FULL_ZVOL_NAME2} || fail 25
${ZPOOL_CREATE_SH} -p ${POOL_NAME1} -c lo-raidz2 -d || fail 26
${ZPOOL_CREATE_SH} -p ${POOL_NAME2} -c lo-raidz2 -d || fail 27
${ZFS_SH} -u || fail 28
rm -f ${TMP_CACHE} || fail 29
pass
}
run_test 8 "zfs send/receive"
# zpool event sanity check
test_9() {
local POOL_NAME=tank
local ZVOL_NAME=fish
local FULL_NAME=${POOL_NAME}/${ZVOL_NAME}
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
local TMP_EVENTS=`mktemp -p /tmp zpool.events.XXXXXXXX`
# Create a pool and volume.
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZFS} create -V 300M ${FULL_NAME} || fail 3
udev_trigger
# Dump the events, there should be at least 5 lines.
${ZPOOL} events >${TMP_EVENTS} || fail 4
EVENTS=`wc -l ${TMP_EVENTS} | cut -f1 -d' '`
[ $EVENTS -lt 5 ] && fail 5
# Clear the events and ensure there are none.
${ZPOOL} events -c >/dev/null || fail 6
${ZPOOL} events >${TMP_EVENTS} || fail 7
EVENTS=`wc -l ${TMP_EVENTS} | cut -f1 -d' '`
[ $EVENTS -gt 1 ] && fail 8
${ZFS} destroy ${FULL_NAME} || fail 9
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 10
${ZFS_SH} -u || fail 11
rm -f ${TMP_CACHE} || fail 12
rm -f ${TMP_EVENTS} || fail 13
pass
}
run_test 9 "zpool events"
zconfig_add_vdev() {
local POOL_NAME=$1
local TYPE=$2
local DEVICE=$3
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
local TMP_FILE3=`mktemp`
BASE_DEVICE=`basename ${DEVICE}`
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1}
${ZPOOL} add -f ${POOL_NAME} ${TYPE} ${DEVICE} 2>/dev/null || return 1
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2}
diff ${TMP_FILE1} ${TMP_FILE2} > ${TMP_FILE3}
[ `wc -l ${TMP_FILE3}|${AWK} '{print $1}'` -eq 3 ] || return 1
PARENT_VDEV=`tail -2 ${TMP_FILE3} | head -1 | ${AWK} '{print $NF}'`
case $TYPE in
cache)
[ "${PARENT_VDEV}" = "${TYPE}" ] || return 1
;;
log)
[ "${PARENT_VDEV}" = "logs" ] || return 1
;;
esac
if ! tail -1 ${TMP_FILE3} |
egrep -q "^>[[:space:]]+${BASE_DEVICE}[[:space:]]+ONLINE" ; then
return 1
fi
rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_FILE3}
return 0
}
# zpool add and remove sanity check
test_10() {
local POOL_NAME=tank
local TMP_CACHE=`mktemp -p /tmp zpool.cache.XXXXXXXX`
local TMP_FILE1=`mktemp`
local TMP_FILE2=`mktemp`
if [ ${SCSI_DEBUG} -eq 0 ] || [ ${HAVE_LSSCSI} -eq 0 ] ; then
skip
return
fi
test `${LSMOD} | grep -c scsi_debug` -gt 0 && \
(${RMMOD} scsi_debug || exit 1)
/sbin/modprobe scsi_debug dev_size_mb=128 ||
die "Error $? creating scsi_debug device"
udev_trigger
SDDEVICE=`${LSSCSI}|${AWK} '/scsi_debug/ { print $6; exit }'`
BASE_SDDEVICE=`basename $SDDEVICE`
# Create a pool
${ZFS_SH} zfs="spa_config_path=${TMP_CACHE}" || fail 1
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 || fail 2
${ZPOOL} status ${POOL_NAME} >${TMP_FILE1} || fail 3
# Add and remove a cache vdev by full path
zconfig_add_vdev ${POOL_NAME} cache ${SDDEVICE} || fail 4
${ZPOOL} remove ${POOL_NAME} ${SDDEVICE} || fail 5
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 6
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 7
sleep 1
# Add and remove a cache vdev by shorthand path
zconfig_add_vdev ${POOL_NAME} cache ${BASE_SDDEVICE} || fail 8
${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 9
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 10
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 11
sleep 1
# Add and remove a log vdev
zconfig_add_vdev ${POOL_NAME} log ${BASE_SDDEVICE} || fail 12
${ZPOOL} remove ${POOL_NAME} ${BASE_SDDEVICE} || fail 13
${ZPOOL} status ${POOL_NAME} >${TMP_FILE2} || fail 14
cmp ${TMP_FILE1} ${TMP_FILE2} || fail 15
${ZPOOL_CREATE_SH} -p ${POOL_NAME} -c lo-raidz2 -d || fail 16
${ZFS_SH} -u || fail 17
${RMMOD} scsi_debug || fail 18
rm -f ${TMP_FILE1} ${TMP_FILE2} ${TMP_CACHE} || fail 19
pass
}
run_test 10 "zpool add/remove vdev"
exit 0
Reference in New Issue View Git Blame Copy Permalink