mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-18 10:21:01 +03:00
b2255edcc0
This patch adds a new top-level vdev type called dRAID, which stands
for Distributed parity RAID. This pool configuration allows all dRAID
vdevs to participate when rebuilding to a distributed hot spare device.
This can substantially reduce the total time required to restore full
parity to pool with a failed device.
A dRAID pool can be created using the new top-level `draid` type.
Like `raidz`, the desired redundancy is specified after the type:
`draid[1,2,3]`. No additional information is required to create the
pool and reasonable default values will be chosen based on the number
of child vdevs in the dRAID vdev.
zpool create <pool> draid[1,2,3] <vdevs...>
Unlike raidz, additional optional dRAID configuration values can be
provided as part of the draid type as colon separated values. This
allows administrators to fully specify a layout for either performance
or capacity reasons. The supported options include:
zpool create <pool> \
draid[<parity>][:<data>d][:<children>c][:<spares>s] \
<vdevs...>
- draid[parity] - Parity level (default 1)
- draid[:<data>d] - Data devices per group (default 8)
- draid[:<children>c] - Expected number of child vdevs
- draid[:<spares>s] - Distributed hot spares (default 0)
Abbreviated example `zpool status` output for a 68 disk dRAID pool
with two distributed spares using special allocation classes.
```
pool: tank
state: ONLINE
config:
NAME STATE READ WRITE CKSUM
slag7 ONLINE 0 0 0
draid2:8d:68c:2s-0 ONLINE 0 0 0
L0 ONLINE 0 0 0
L1 ONLINE 0 0 0
...
U25 ONLINE 0 0 0
U26 ONLINE 0 0 0
spare-53 ONLINE 0 0 0
U27 ONLINE 0 0 0
draid2-0-0 ONLINE 0 0 0
U28 ONLINE 0 0 0
U29 ONLINE 0 0 0
...
U42 ONLINE 0 0 0
U43 ONLINE 0 0 0
special
mirror-1 ONLINE 0 0 0
L5 ONLINE 0 0 0
U5 ONLINE 0 0 0
mirror-2 ONLINE 0 0 0
L6 ONLINE 0 0 0
U6 ONLINE 0 0 0
spares
draid2-0-0 INUSE currently in use
draid2-0-1 AVAIL
```
When adding test coverage for the new dRAID vdev type the following
options were added to the ztest command. These options are leverages
by zloop.sh to test a wide range of dRAID configurations.
-K draid|raidz|random - kind of RAID to test
-D <value> - dRAID data drives per group
-S <value> - dRAID distributed hot spares
-R <value> - RAID parity (raidz or dRAID)
The zpool_create, zpool_import, redundancy, replacement and fault
test groups have all been updated provide test coverage for the
dRAID feature.
Co-authored-by: Isaac Huang <he.huang@intel.com>
Co-authored-by: Mark Maybee <mmaybee@cray.com>
Co-authored-by: Don Brady <don.brady@delphix.com>
Co-authored-by: Matthew Ahrens <mahrens@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mmaybee@cray.com>
Reviewed-by: Matt Ahrens <matt@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #10102
197 lines
5.9 KiB
Groff
197 lines
5.9 KiB
Groff
'\" t
|
|
.\"
|
|
.\" CDDL HEADER START
|
|
.\"
|
|
.\" The contents of this file are subject to the terms of the
|
|
.\" Common Development and Distribution License (the "License").
|
|
.\" You may not use this file except in compliance with the License.
|
|
.\"
|
|
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
.\" or http://www.opensolaris.org/os/licensing.
|
|
.\" See the License for the specific language governing permissions
|
|
.\" and limitations under the License.
|
|
.\"
|
|
.\" When distributing Covered Code, include this CDDL HEADER in each
|
|
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
.\" If applicable, add the following below this CDDL HEADER, with the
|
|
.\" fields enclosed by brackets "[]" replaced with your own identifying
|
|
.\" information: Portions Copyright [yyyy] [name of copyright owner]
|
|
.\"
|
|
.\" CDDL HEADER END
|
|
.\"
|
|
.\"
|
|
.\" Copyright (c) 2009 Oracle and/or its affiliates. All rights reserved.
|
|
.\" Copyright (c) 2009 Michael Gebetsroither <michael.geb@gmx.at>. All rights
|
|
.\" reserved.
|
|
.\" Copyright (c) 2017, Intel Corporation.
|
|
.\"
|
|
.TH ZTEST 1 "Aug 24, 2020" OpenZFS
|
|
|
|
.SH NAME
|
|
\fBztest\fR \- was written by the ZFS Developers as a ZFS unit test.
|
|
.SH SYNOPSIS
|
|
.LP
|
|
.BI "ztest <options>"
|
|
.SH DESCRIPTION
|
|
.LP
|
|
This manual page documents briefly the \fBztest\fR command.
|
|
.LP
|
|
\fBztest\fR was written by the ZFS Developers as a ZFS unit test. The
|
|
tool was developed in tandem with the ZFS functionality and was
|
|
executed nightly as one of the many regression test against the daily
|
|
build. As features were added to ZFS, unit tests were also added to
|
|
\fBztest\fR. In addition, a separate test development team wrote and
|
|
executed more functional and stress tests.
|
|
.LP
|
|
By default \fBztest\fR runs for ten minutes and uses block files
|
|
(stored in /tmp) to create pools rather than using physical disks.
|
|
Block files afford \fBztest\fR its flexibility to play around with
|
|
zpool components without requiring large hardware configurations.
|
|
However, storing the block files in /tmp may not work for you if you
|
|
have a small tmp directory.
|
|
.LP
|
|
By default is non-verbose. This is why entering the command above will
|
|
result in \fBztest\fR quietly executing for 5 minutes. The -V option
|
|
can be used to increase the verbosity of the tool. Adding multiple -V
|
|
option is allowed and the more you add the more chatty \fBztest\fR
|
|
becomes.
|
|
.LP
|
|
After the \fBztest\fR run completes, you should notice many ztest.*
|
|
files lying around. Once the run completes you can safely remove these
|
|
files. Note that you shouldn't remove these files during a run. You
|
|
can re-use these files in your next \fBztest\fR run by using the -E
|
|
option.
|
|
.SH OPTIONS
|
|
.HP
|
|
.BI "\-?" ""
|
|
.IP
|
|
Print a help summary.
|
|
.HP
|
|
.BI "\-v" " vdevs" " (default: 5)
|
|
.IP
|
|
Number of vdevs.
|
|
.HP
|
|
.BI "\-s" " size_of_each_vdev" " (default: 64M)"
|
|
.IP
|
|
Size of each vdev.
|
|
.HP
|
|
.BI "\-a" " alignment_shift" " (default: 9) (use 0 for random)"
|
|
.IP
|
|
Used alignment in test.
|
|
.HP
|
|
.BI "\-m" " mirror_copies" " (default: 2)"
|
|
.IP
|
|
Number of mirror copies.
|
|
.HP
|
|
.BI "\-r" " raidz_disks / draid_disks" " (default: 4 / 16)"
|
|
.IP
|
|
Number of raidz disks.
|
|
.HP
|
|
.BI "\-R" " raid_parity" " (default: 1)"
|
|
.IP
|
|
Raid parity (raidz & draid).
|
|
.HP
|
|
.BI "\-K" " raid_kind" " (default: 'random') raidz|draid|random"
|
|
.IP
|
|
The kind of RAID config to use. With 'random' the kind alternates between raidz and draid.
|
|
.HP
|
|
.BI "\-D" " draid_data" " (default: 4)"
|
|
.IP
|
|
Number of data disks in a dRAID redundancy group.
|
|
.HP
|
|
.BI "\-S" " draid_spares" " (default: 1)"
|
|
.IP
|
|
Number of dRAID distributed spare disks.
|
|
.HP
|
|
.BI "\-C" " vdev_class_state" " (default: random)"
|
|
.IP
|
|
The vdev allocation class state: special=on|off|random.
|
|
.HP
|
|
.BI "\-d" " datasets" " (default: 7)"
|
|
.IP
|
|
Number of datasets.
|
|
.HP
|
|
.BI "\-t" " threads" " (default: 23)"
|
|
.IP
|
|
Number of threads.
|
|
.HP
|
|
.BI "\-g" " gang_block_threshold" " (default: 32K)"
|
|
.IP
|
|
Gang block threshold.
|
|
.HP
|
|
.BI "\-i" " initialize_pool_i_times" " (default: 1)"
|
|
.IP
|
|
Number of pool initialisations.
|
|
.HP
|
|
.BI "\-k" " kill_percentage" " (default: 70%)"
|
|
.IP
|
|
Kill percentage.
|
|
.HP
|
|
.BI "\-p" " pool_name" " (default: ztest)"
|
|
.IP
|
|
Pool name.
|
|
.HP
|
|
.BI "\-V(erbose)"
|
|
.IP
|
|
Verbose (use multiple times for ever more blather).
|
|
.HP
|
|
.BI "\-E(xisting)"
|
|
.IP
|
|
Use existing pool (use existing pool instead of creating new one).
|
|
.HP
|
|
.BI "\-T" " time" " (default: 300 sec)"
|
|
.IP
|
|
Total test run time.
|
|
.HP
|
|
.BI "\-z" " zil_failure_rate" " (default: fail every 2^5 allocs)
|
|
.IP
|
|
Injected failure rate.
|
|
.HP
|
|
.BI "\-G"
|
|
.IP
|
|
Dump zfs_dbgmsg buffer before exiting.
|
|
.SH "EXAMPLES"
|
|
.LP
|
|
To override /tmp as your location for block files, you can use the -f
|
|
option:
|
|
.IP
|
|
ztest -f /
|
|
.LP
|
|
To get an idea of what ztest is actually testing try this:
|
|
.IP
|
|
ztest -f / -VVV
|
|
.LP
|
|
Maybe you'd like to run ztest for longer? To do so simply use the -T
|
|
option and specify the runlength in seconds like so:
|
|
.IP
|
|
ztest -f / -V -T 120
|
|
|
|
.SH "ENVIRONMENT VARIABLES"
|
|
.TP
|
|
.B "ZFS_HOSTID=id"
|
|
Use \fBid\fR instead of the SPL hostid to identify this host. Intended for use
|
|
with ztest, but this environment variable will affect any utility which uses
|
|
libzpool, including \fBzpool(8)\fR. Since the kernel is unaware of this setting
|
|
results with utilities other than ztest are undefined.
|
|
.TP
|
|
.B "ZFS_STACK_SIZE=stacksize"
|
|
Limit the default stack size to \fBstacksize\fR bytes for the purpose of
|
|
detecting and debugging kernel stack overflows. This value defaults to
|
|
\fB32K\fR which is double the default \fB16K\fR Linux kernel stack size.
|
|
|
|
In practice, setting the stack size slightly higher is needed because
|
|
differences in stack usage between kernel and user space can lead to spurious
|
|
stack overflows (especially when debugging is enabled). The specified value
|
|
will be rounded up to a floor of PTHREAD_STACK_MIN which is the minimum stack
|
|
required for a NULL procedure in user space.
|
|
|
|
By default the stack size is limited to 256K.
|
|
.SH "SEE ALSO"
|
|
.BR "spl-module-parameters (5)" ","
|
|
.BR "zpool (1)" ","
|
|
.BR "zfs (1)" ","
|
|
.BR "zdb (1)" ","
|
|
.SH "AUTHOR"
|
|
This manual page was transferred to asciidoc by Michael Gebetsroither
|
|
<gebi@grml.org> from http://opensolaris.org/os/community/zfs/ztest/
|