mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-17 10:01:01 +03:00
6fe3498ca3
Many modern devices use physical allocation units that are much larger than the minimum logical allocation size accessible by external commands. Two prevalent examples of this are 512e disk drives (512b logical sector, 4K physical sector) and flash devices (512b logical sector, 4K or larger allocation block size, and 128k or larger erase block size). Operations that modify less than the physical sector size result in a costly read-modify-write or garbage collection sequence on these devices. Simply exporting the true physical sector of the device to ZFS would yield optimal performance, but has two serious drawbacks: 1. Existing pools created with devices that have different logical and physical block sizes, but were configured to use the logical block size (e.g. because the OS version used for pool construction reported the logical block size instead of the physical block size) will suddenly find that the vdev allocation size has increased. This can be easily tolerated for active members of the array, but ZFS would prevent replacement of a vdev with another identical device because it now appears that the smaller allocation size required by the pool is not supported by the new device. 2. The device's physical block size may be too large to be supported by ZFS. The optimal allocation size for the vdev may be quite large. For example, a RAID controller may export a vdev that requires read-modify-write cycles unless accessed using 64k aligned/sized requests. ZFS currently has an 8k minimum block size limit. Reporting both the logical and physical allocation sizes for vdevs solves these problems. A device may be used so long as the logical block size is compatible with the configuration. By comparing the logical and physical block sizes, new configurations can be optimized and administrators can be notified of any existing pools that are sub-optimal. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Matthew Macy <mmacy@freebsd.org> Signed-off-by: Matt Macy <mmacy@FreeBSD.org> Closes #10619
509 lines
14 KiB
C
509 lines
14 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2012 by Delphix. All rights reserved.
|
|
* Copyright (c) 2013 Steven Hartland. All rights reserved.
|
|
*/
|
|
|
|
/*
|
|
* This file contains the functions which analyze the status of a pool. This
|
|
* include both the status of an active pool, as well as the status exported
|
|
* pools. Returns one of the ZPOOL_STATUS_* defines describing the status of
|
|
* the pool. This status is independent (to a certain degree) from the state of
|
|
* the pool. A pool's state describes only whether or not it is capable of
|
|
* providing the necessary fault tolerance for data. The status describes the
|
|
* overall status of devices. A pool that is online can still have a device
|
|
* that is experiencing errors.
|
|
*
|
|
* Only a subset of the possible faults can be detected using 'zpool status',
|
|
* and not all possible errors correspond to a FMA message ID. The explanation
|
|
* is left up to the caller, depending on whether it is a live pool or an
|
|
* import.
|
|
*/
|
|
|
|
#include <libzfs.h>
|
|
#include <libzutil.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <unistd.h>
|
|
#include <sys/systeminfo.h>
|
|
#include "libzfs_impl.h"
|
|
#include "zfeature_common.h"
|
|
|
|
/*
|
|
* Message ID table. This must be kept in sync with the ZPOOL_STATUS_* defines
|
|
* in include/libzfs.h. Note that there are some status results which go past
|
|
* the end of this table, and hence have no associated message ID.
|
|
*/
|
|
static char *zfs_msgid_table[] = {
|
|
"ZFS-8000-14", /* ZPOOL_STATUS_CORRUPT_CACHE */
|
|
"ZFS-8000-2Q", /* ZPOOL_STATUS_MISSING_DEV_R */
|
|
"ZFS-8000-3C", /* ZPOOL_STATUS_MISSING_DEV_NR */
|
|
"ZFS-8000-4J", /* ZPOOL_STATUS_CORRUPT_LABEL_R */
|
|
"ZFS-8000-5E", /* ZPOOL_STATUS_CORRUPT_LABEL_NR */
|
|
"ZFS-8000-6X", /* ZPOOL_STATUS_BAD_GUID_SUM */
|
|
"ZFS-8000-72", /* ZPOOL_STATUS_CORRUPT_POOL */
|
|
"ZFS-8000-8A", /* ZPOOL_STATUS_CORRUPT_DATA */
|
|
"ZFS-8000-9P", /* ZPOOL_STATUS_FAILING_DEV */
|
|
"ZFS-8000-A5", /* ZPOOL_STATUS_VERSION_NEWER */
|
|
"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_MISMATCH */
|
|
"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_ACTIVE */
|
|
"ZFS-8000-EY", /* ZPOOL_STATUS_HOSTID_REQUIRED */
|
|
"ZFS-8000-HC", /* ZPOOL_STATUS_IO_FAILURE_WAIT */
|
|
"ZFS-8000-JQ", /* ZPOOL_STATUS_IO_FAILURE_CONTINUE */
|
|
"ZFS-8000-MM", /* ZPOOL_STATUS_IO_FAILURE_MMP */
|
|
"ZFS-8000-K4", /* ZPOOL_STATUS_BAD_LOG */
|
|
"ZFS-8000-ER", /* ZPOOL_STATUS_ERRATA */
|
|
/*
|
|
* The following results have no message ID.
|
|
* ZPOOL_STATUS_UNSUP_FEAT_READ
|
|
* ZPOOL_STATUS_UNSUP_FEAT_WRITE
|
|
* ZPOOL_STATUS_FAULTED_DEV_R
|
|
* ZPOOL_STATUS_FAULTED_DEV_NR
|
|
* ZPOOL_STATUS_VERSION_OLDER
|
|
* ZPOOL_STATUS_FEAT_DISABLED
|
|
* ZPOOL_STATUS_RESILVERING
|
|
* ZPOOL_STATUS_OFFLINE_DEV
|
|
* ZPOOL_STATUS_REMOVED_DEV
|
|
* ZPOOL_STATUS_REBUILDING
|
|
* ZPOOL_STATUS_REBUILD_SCRUB
|
|
* ZPOOL_STATUS_OK
|
|
*/
|
|
};
|
|
|
|
#define NMSGID (sizeof (zfs_msgid_table) / sizeof (zfs_msgid_table[0]))
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
vdev_missing(vdev_stat_t *vs, uint_t vsc)
|
|
{
|
|
return (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
vs->vs_aux == VDEV_AUX_OPEN_FAILED);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
vdev_faulted(vdev_stat_t *vs, uint_t vsc)
|
|
{
|
|
return (vs->vs_state == VDEV_STATE_FAULTED);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
vdev_errors(vdev_stat_t *vs, uint_t vsc)
|
|
{
|
|
return (vs->vs_state == VDEV_STATE_DEGRADED ||
|
|
vs->vs_read_errors != 0 || vs->vs_write_errors != 0 ||
|
|
vs->vs_checksum_errors != 0);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
vdev_broken(vdev_stat_t *vs, uint_t vsc)
|
|
{
|
|
return (vs->vs_state == VDEV_STATE_CANT_OPEN);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
vdev_offlined(vdev_stat_t *vs, uint_t vsc)
|
|
{
|
|
return (vs->vs_state == VDEV_STATE_OFFLINE);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
vdev_removed(vdev_stat_t *vs, uint_t vsc)
|
|
{
|
|
return (vs->vs_state == VDEV_STATE_REMOVED);
|
|
}
|
|
|
|
static int
|
|
vdev_non_native_ashift(vdev_stat_t *vs, uint_t vsc)
|
|
{
|
|
if (getenv("ZPOOL_STATUS_NON_NATIVE_ASHIFT_IGNORE") != NULL)
|
|
return (0);
|
|
|
|
return (VDEV_STAT_VALID(vs_physical_ashift, vsc) &&
|
|
vs->vs_configured_ashift < vs->vs_physical_ashift);
|
|
}
|
|
|
|
/*
|
|
* Detect if any leaf devices that have seen errors or could not be opened.
|
|
*/
|
|
static boolean_t
|
|
find_vdev_problem(nvlist_t *vdev, int (*func)(vdev_stat_t *, uint_t),
|
|
boolean_t ignore_replacing)
|
|
{
|
|
nvlist_t **child;
|
|
vdev_stat_t *vs;
|
|
uint_t c, vsc, children;
|
|
|
|
/*
|
|
* Ignore problems within a 'replacing' vdev, since we're presumably in
|
|
* the process of repairing any such errors, and don't want to call them
|
|
* out again. We'll pick up the fact that a resilver is happening
|
|
* later.
|
|
*/
|
|
if (ignore_replacing == B_TRUE) {
|
|
char *type;
|
|
|
|
verify(nvlist_lookup_string(vdev, ZPOOL_CONFIG_TYPE,
|
|
&type) == 0);
|
|
if (strcmp(type, VDEV_TYPE_REPLACING) == 0)
|
|
return (B_FALSE);
|
|
}
|
|
|
|
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_CHILDREN, &child,
|
|
&children) == 0) {
|
|
for (c = 0; c < children; c++)
|
|
if (find_vdev_problem(child[c], func, ignore_replacing))
|
|
return (B_TRUE);
|
|
} else {
|
|
verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_VDEV_STATS,
|
|
(uint64_t **)&vs, &vsc) == 0);
|
|
|
|
if (func(vs, vsc) != 0)
|
|
return (B_TRUE);
|
|
}
|
|
|
|
/*
|
|
* Check any L2 cache devs
|
|
*/
|
|
if (nvlist_lookup_nvlist_array(vdev, ZPOOL_CONFIG_L2CACHE, &child,
|
|
&children) == 0) {
|
|
for (c = 0; c < children; c++)
|
|
if (find_vdev_problem(child[c], func, ignore_replacing))
|
|
return (B_TRUE);
|
|
}
|
|
|
|
return (B_FALSE);
|
|
}
|
|
|
|
/*
|
|
* Active pool health status.
|
|
*
|
|
* To determine the status for a pool, we make several passes over the config,
|
|
* picking the most egregious error we find. In order of importance, we do the
|
|
* following:
|
|
*
|
|
* - Check for a complete and valid configuration
|
|
* - Look for any faulted or missing devices in a non-replicated config
|
|
* - Check for any data errors
|
|
* - Check for any faulted or missing devices in a replicated config
|
|
* - Look for any devices showing errors
|
|
* - Check for any resilvering or rebuilding devices
|
|
*
|
|
* There can obviously be multiple errors within a single pool, so this routine
|
|
* only picks the most damaging of all the current errors to report.
|
|
*/
|
|
static zpool_status_t
|
|
check_status(nvlist_t *config, boolean_t isimport, zpool_errata_t *erratap)
|
|
{
|
|
nvlist_t *nvroot;
|
|
vdev_stat_t *vs;
|
|
pool_scan_stat_t *ps = NULL;
|
|
uint_t vsc, psc;
|
|
uint64_t nerr;
|
|
uint64_t version;
|
|
uint64_t stateval;
|
|
uint64_t suspended;
|
|
uint64_t hostid = 0;
|
|
uint64_t errata = 0;
|
|
unsigned long system_hostid = get_system_hostid();
|
|
|
|
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
|
|
&version) == 0);
|
|
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
|
|
&nvroot) == 0);
|
|
verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS,
|
|
(uint64_t **)&vs, &vsc) == 0);
|
|
verify(nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE,
|
|
&stateval) == 0);
|
|
|
|
/*
|
|
* Currently resilvering a vdev
|
|
*/
|
|
(void) nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_SCAN_STATS,
|
|
(uint64_t **)&ps, &psc);
|
|
if (ps != NULL && ps->pss_func == POOL_SCAN_RESILVER &&
|
|
ps->pss_state == DSS_SCANNING)
|
|
return (ZPOOL_STATUS_RESILVERING);
|
|
|
|
/*
|
|
* Currently rebuilding a vdev, check top-level vdevs.
|
|
*/
|
|
vdev_rebuild_stat_t *vrs = NULL;
|
|
nvlist_t **child;
|
|
uint_t c, i, children;
|
|
uint64_t rebuild_end_time = 0;
|
|
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN,
|
|
&child, &children) == 0) {
|
|
for (c = 0; c < children; c++) {
|
|
if ((nvlist_lookup_uint64_array(child[c],
|
|
ZPOOL_CONFIG_REBUILD_STATS,
|
|
(uint64_t **)&vrs, &i) == 0) && (vrs != NULL)) {
|
|
uint64_t state = vrs->vrs_state;
|
|
|
|
if (state == VDEV_REBUILD_ACTIVE) {
|
|
return (ZPOOL_STATUS_REBUILDING);
|
|
} else if (state == VDEV_REBUILD_COMPLETE &&
|
|
vrs->vrs_end_time > rebuild_end_time) {
|
|
rebuild_end_time = vrs->vrs_end_time;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we can determine when the last scrub was run, and it
|
|
* was before the last rebuild completed, then recommend
|
|
* that the pool be scrubbed to verify all checksums. When
|
|
* ps is NULL we can infer the pool has never been scrubbed.
|
|
*/
|
|
if (rebuild_end_time > 0) {
|
|
if (ps != NULL) {
|
|
if ((ps->pss_state == DSS_FINISHED &&
|
|
ps->pss_func == POOL_SCAN_SCRUB &&
|
|
rebuild_end_time > ps->pss_end_time) ||
|
|
ps->pss_state == DSS_NONE)
|
|
return (ZPOOL_STATUS_REBUILD_SCRUB);
|
|
} else {
|
|
return (ZPOOL_STATUS_REBUILD_SCRUB);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The multihost property is set and the pool may be active.
|
|
*/
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
vs->vs_aux == VDEV_AUX_ACTIVE) {
|
|
mmp_state_t mmp_state;
|
|
nvlist_t *nvinfo;
|
|
|
|
nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO);
|
|
mmp_state = fnvlist_lookup_uint64(nvinfo,
|
|
ZPOOL_CONFIG_MMP_STATE);
|
|
|
|
if (mmp_state == MMP_STATE_ACTIVE)
|
|
return (ZPOOL_STATUS_HOSTID_ACTIVE);
|
|
else if (mmp_state == MMP_STATE_NO_HOSTID)
|
|
return (ZPOOL_STATUS_HOSTID_REQUIRED);
|
|
else
|
|
return (ZPOOL_STATUS_HOSTID_MISMATCH);
|
|
}
|
|
|
|
/*
|
|
* Pool last accessed by another system.
|
|
*/
|
|
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_HOSTID, &hostid);
|
|
if (hostid != 0 && (unsigned long)hostid != system_hostid &&
|
|
stateval == POOL_STATE_ACTIVE)
|
|
return (ZPOOL_STATUS_HOSTID_MISMATCH);
|
|
|
|
/*
|
|
* Newer on-disk version.
|
|
*/
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
vs->vs_aux == VDEV_AUX_VERSION_NEWER)
|
|
return (ZPOOL_STATUS_VERSION_NEWER);
|
|
|
|
/*
|
|
* Unsupported feature(s).
|
|
*/
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
vs->vs_aux == VDEV_AUX_UNSUP_FEAT) {
|
|
nvlist_t *nvinfo;
|
|
|
|
verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO,
|
|
&nvinfo) == 0);
|
|
if (nvlist_exists(nvinfo, ZPOOL_CONFIG_CAN_RDONLY))
|
|
return (ZPOOL_STATUS_UNSUP_FEAT_WRITE);
|
|
return (ZPOOL_STATUS_UNSUP_FEAT_READ);
|
|
}
|
|
|
|
/*
|
|
* Check that the config is complete.
|
|
*/
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
vs->vs_aux == VDEV_AUX_BAD_GUID_SUM)
|
|
return (ZPOOL_STATUS_BAD_GUID_SUM);
|
|
|
|
/*
|
|
* Check whether the pool has suspended.
|
|
*/
|
|
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED,
|
|
&suspended) == 0) {
|
|
uint64_t reason;
|
|
|
|
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_SUSPENDED_REASON,
|
|
&reason) == 0 && reason == ZIO_SUSPEND_MMP)
|
|
return (ZPOOL_STATUS_IO_FAILURE_MMP);
|
|
|
|
if (suspended == ZIO_FAILURE_MODE_CONTINUE)
|
|
return (ZPOOL_STATUS_IO_FAILURE_CONTINUE);
|
|
return (ZPOOL_STATUS_IO_FAILURE_WAIT);
|
|
}
|
|
|
|
/*
|
|
* Could not read a log.
|
|
*/
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
vs->vs_aux == VDEV_AUX_BAD_LOG) {
|
|
return (ZPOOL_STATUS_BAD_LOG);
|
|
}
|
|
|
|
/*
|
|
* Bad devices in non-replicated config.
|
|
*/
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
find_vdev_problem(nvroot, vdev_faulted, B_TRUE))
|
|
return (ZPOOL_STATUS_FAULTED_DEV_NR);
|
|
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
find_vdev_problem(nvroot, vdev_missing, B_TRUE))
|
|
return (ZPOOL_STATUS_MISSING_DEV_NR);
|
|
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
find_vdev_problem(nvroot, vdev_broken, B_TRUE))
|
|
return (ZPOOL_STATUS_CORRUPT_LABEL_NR);
|
|
|
|
/*
|
|
* Corrupted pool metadata
|
|
*/
|
|
if (vs->vs_state == VDEV_STATE_CANT_OPEN &&
|
|
vs->vs_aux == VDEV_AUX_CORRUPT_DATA)
|
|
return (ZPOOL_STATUS_CORRUPT_POOL);
|
|
|
|
/*
|
|
* Persistent data errors.
|
|
*/
|
|
if (!isimport) {
|
|
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRCOUNT,
|
|
&nerr) == 0 && nerr != 0)
|
|
return (ZPOOL_STATUS_CORRUPT_DATA);
|
|
}
|
|
|
|
/*
|
|
* Missing devices in a replicated config.
|
|
*/
|
|
if (find_vdev_problem(nvroot, vdev_faulted, B_TRUE))
|
|
return (ZPOOL_STATUS_FAULTED_DEV_R);
|
|
if (find_vdev_problem(nvroot, vdev_missing, B_TRUE))
|
|
return (ZPOOL_STATUS_MISSING_DEV_R);
|
|
if (find_vdev_problem(nvroot, vdev_broken, B_TRUE))
|
|
return (ZPOOL_STATUS_CORRUPT_LABEL_R);
|
|
|
|
/*
|
|
* Devices with errors
|
|
*/
|
|
if (!isimport && find_vdev_problem(nvroot, vdev_errors, B_TRUE))
|
|
return (ZPOOL_STATUS_FAILING_DEV);
|
|
|
|
/*
|
|
* Offlined devices
|
|
*/
|
|
if (find_vdev_problem(nvroot, vdev_offlined, B_TRUE))
|
|
return (ZPOOL_STATUS_OFFLINE_DEV);
|
|
|
|
/*
|
|
* Removed device
|
|
*/
|
|
if (find_vdev_problem(nvroot, vdev_removed, B_TRUE))
|
|
return (ZPOOL_STATUS_REMOVED_DEV);
|
|
|
|
/*
|
|
* Suboptimal, but usable, ashift configuration.
|
|
*/
|
|
if (find_vdev_problem(nvroot, vdev_non_native_ashift, B_FALSE))
|
|
return (ZPOOL_STATUS_NON_NATIVE_ASHIFT);
|
|
|
|
/*
|
|
* Informational errata available.
|
|
*/
|
|
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_ERRATA, &errata);
|
|
if (errata) {
|
|
*erratap = errata;
|
|
return (ZPOOL_STATUS_ERRATA);
|
|
}
|
|
|
|
/*
|
|
* Outdated, but usable, version
|
|
*/
|
|
if (SPA_VERSION_IS_SUPPORTED(version) && version != SPA_VERSION)
|
|
return (ZPOOL_STATUS_VERSION_OLDER);
|
|
|
|
/*
|
|
* Usable pool with disabled features
|
|
*/
|
|
if (version >= SPA_VERSION_FEATURES) {
|
|
int i;
|
|
nvlist_t *feat;
|
|
|
|
if (isimport) {
|
|
feat = fnvlist_lookup_nvlist(config,
|
|
ZPOOL_CONFIG_LOAD_INFO);
|
|
if (nvlist_exists(feat, ZPOOL_CONFIG_ENABLED_FEAT))
|
|
feat = fnvlist_lookup_nvlist(feat,
|
|
ZPOOL_CONFIG_ENABLED_FEAT);
|
|
} else {
|
|
feat = fnvlist_lookup_nvlist(config,
|
|
ZPOOL_CONFIG_FEATURE_STATS);
|
|
}
|
|
|
|
for (i = 0; i < SPA_FEATURES; i++) {
|
|
zfeature_info_t *fi = &spa_feature_table[i];
|
|
if (!nvlist_exists(feat, fi->fi_guid))
|
|
return (ZPOOL_STATUS_FEAT_DISABLED);
|
|
}
|
|
}
|
|
|
|
return (ZPOOL_STATUS_OK);
|
|
}
|
|
|
|
zpool_status_t
|
|
zpool_get_status(zpool_handle_t *zhp, char **msgid, zpool_errata_t *errata)
|
|
{
|
|
zpool_status_t ret = check_status(zhp->zpool_config, B_FALSE, errata);
|
|
if (msgid != NULL) {
|
|
if (ret >= NMSGID)
|
|
*msgid = NULL;
|
|
else
|
|
*msgid = zfs_msgid_table[ret];
|
|
}
|
|
return (ret);
|
|
}
|
|
|
|
zpool_status_t
|
|
zpool_import_status(nvlist_t *config, char **msgid, zpool_errata_t *errata)
|
|
{
|
|
zpool_status_t ret = check_status(config, B_TRUE, errata);
|
|
|
|
if (ret >= NMSGID)
|
|
*msgid = NULL;
|
|
else
|
|
*msgid = zfs_msgid_table[ret];
|
|
|
|
return (ret);
|
|
}
|