mirror_zfs/tests/zfs-tests/cmd/largest_file/largest_file.c
Brian Behlendorf 95401cb6f7 Enable remaining tests
Enable most of the remaining test cases which were previously
disabled.  The required fixes are as follows:

* cache_001_pos - No changes required.

* cache_010_neg - Updated to use losetup under Linux.  Loopback
  cache devices are allowed, ZVOLs as cache devices are not.
  Disabled until all the builders pass reliably.

* cachefile_001_pos, cachefile_002_pos, cachefile_003_pos,
  cachefile_004_pos - Set set_device_dir path in cachefile.cfg,
  updated CPATH1 and CPATH2 to reference unique files.

* zfs_clone_005_pos - Wait for udev to create volumes.

* zfs_mount_007_pos - Updated mount options to expected Linux names.

* zfs_mount_009_neg, zfs_mount_all_001_pos - No changes required.

* zfs_unmount_005_pos, zfs_unmount_009_pos, zfs_unmount_all_001_pos -
  Updated to expect -f to not unmount busy mount points under Linux.

* rsend_019_pos - Observed to occasionally take a long time on both
  32-bit systems and the kmemleak builder.

* zfs_written_property_001_pos - Switched sync(1) to sync_pool.

* devices_001_pos, devices_002_neg - Updated create_dev_file() helper
  for Linux.

* exec_002_neg.ksh - Fixed mmap_exec.c to preserve errno.  Updated
  test case to expect EPERM from Linux as described by mmap(2).

* grow_pool_001_pos - Adding missing setup.ksh and cleanup.ksh
  scripts from OpenZFS.

* grow_replicas_001_pos.ksh - Added missing $SLICE_* variables.

* history_004_pos, history_006_neg, history_008_pos - Fixed by
  previous commits and were not enabled.  No changes required.

* zfs_allow_010_pos - Added missing spaces after assorted zfs
  commands in delegate_common.kshlib.

* inuse_* - Illumos dump device tests skipped.  Remaining test
  cases updated to correctly create required partitions.

* large_files_001_pos - Fixed largest_file.c to accept EINVAL
  as well as EFBIG as described in write(2).

* link_count_001 - Added nproc to required commands.

* umountall_001 - Updated to use umount -a.

* online_offline_001_* - Pull in OpenZFS change to file_trunc.c
  to make the '-c 0' option run the test in a loop.  Included
  online_offline.cfg file in all test cases.

* rename_dirs_001_pos - Updated to use the rename_dir test binary,
  pkill restricted to exact matches and total runtime reduced.

* slog_013_neg, write_dirs_002_pos - No changes required.

* slog_013_pos.ksh - Updated to use losetup under Linux.

* slog_014_pos.ksh - ZED will not be running, manually degrade
  the damaged vdev as expected.

* nopwrite_varying_compression, nopwrite_volume - Forced pool
  sync with sync_pool to ensure up to date property values.

* Fixed typos in ZED log messages.  Refactored zed_* helper
  functions to resolve all-syslog exit=1 errors in zedlog.

* zfs_copies_005_neg, zfs_get_004_pos, zpool_add_004_pos,
  zpool_destroy_001_pos, largest_pool_001_pos, clone_001_pos.ksh,
  clone_001_pos, - Skip until layering pools on zvols is solid.

* largest_pool_001_pos - Limited to 7eb pool, maximum
  supported size in 8eb-1 on Linux.

* zpool_expand_001_pos, zpool_expand_003_neg - Requires
  additional support from the ZED, updated skip reason.

* zfs_rollback_001_pos, zfs_rollback_002_pos - Properly cleanup
  busy mount points under Linux between test loops.

* privilege_001_pos, privilege_003_pos, rollback_003_pos,
  threadsappend_001_pos - Skip with log_unsupported.

* snapshot_016_pos - No changes required.

* snapshot_008_pos - Increased LIMIT from 512K to 2M and added
  sync_pool to avoid false positives.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6128
2017-05-22 12:34:32 -04:00

143 lines
3.2 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2007 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/*
* Copyright (c) 2012 by Delphix. All rights reserved.
*/
#include "../file_common.h"
#include <sys/param.h>
#include <signal.h>
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <unistd.h>
typedef long long offset_t;
#define MAXOFFSET_T LLONG_MAX
/*
* --------------------------------------------------------------
*
* Assertion:
* The last byte of the largest file size can be
* accessed without any errors. Also, the writing
* beyond the last byte of the largest file size
* will produce an errno of EFBIG.
*
* --------------------------------------------------------------
* If the write() system call below returns a "1",
* then the last byte can be accessed.
* --------------------------------------------------------------
*/
static void sigxfsz(int);
static void usage(char *);
int
main(int argc, char **argv)
{
int fd = 0;
offset_t offset = (MAXOFFSET_T - 1);
offset_t llseek_ret = 0;
int write_ret = 0;
int err = 0;
char mybuf[5] = "aaaa\0";
char *testfile;
mode_t mode = S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH;
if (argc != 2) {
usage(argv[0]);
}
(void) sigset(SIGXFSZ, sigxfsz);
testfile = strdup(argv[1]);
fd = open(testfile, O_CREAT | O_RDWR, mode);
if (fd < 0) {
err = errno;
perror("Failed to create testfile");
free(testfile);
return (err);
}
llseek_ret = lseek64(fd, offset, SEEK_SET);
if (llseek_ret < 0) {
err = errno;
perror("Failed to seek to end of testfile");
goto out;
}
write_ret = write(fd, mybuf, 1);
if (write_ret < 0) {
err = errno;
perror("Failed to write to end of file");
goto out;
}
offset = 0;
llseek_ret = lseek64(fd, offset, SEEK_CUR);
if (llseek_ret < 0) {
err = errno;
perror("Failed to seek to end of file");
goto out;
}
write_ret = write(fd, mybuf, 1);
if (write_ret < 0) {
if (errno == EFBIG || errno == EINVAL) {
(void) printf("write errno=EFBIG|EINVAL: success\n");
err = 0;
} else {
err = errno;
perror("Did not receive EFBIG");
}
} else {
(void) printf("write completed successfully, test failed\n");
err = 1;
}
out:
(void) unlink(testfile);
free(testfile);
close(fd);
return (err);
}
static void
usage(char *name)
{
(void) printf("%s <testfile>\n", name);
exit(1);
}
/* ARGSUSED */
static void
sigxfsz(int signo)
{
(void) printf("\nlargest_file: sigxfsz() caught SIGXFSZ\n");
}