mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-17 18:11:00 +03:00
c96c36fa22
The zfs_znode_hold_enter() / zfs_znode_hold_exit() functions are used to serialize access to a znode and its SA buffer while the object is being created or destroyed. This kind of locking would normally reside in the znode itself but in this case that's impossible because the znode and SA buffer may not yet exist. Therefore the locking is handled externally with an array of mutexs and AVLs trees which contain per-object locks. In zfs_znode_hold_enter() a per-object lock is created as needed, inserted in to the correct AVL tree and finally the per-object lock is held. In zfs_znode_hold_exit() the process is reversed. The per-object lock is released, removed from the AVL tree and destroyed if there are no waiters. This scheme has two important properties: 1) No memory allocations are performed while holding one of the z_hold_locks. This ensures evict(), which can be called from direct memory reclaim, will never block waiting on a z_hold_locks which just happens to have hashed to the same index. 2) All locks used to serialize access to an object are per-object and never shared. This minimizes lock contention without creating a large number of dedicated locks. On the downside it does require znode_lock_t structures to be frequently allocated and freed. However, because these are backed by a kmem cache and very short lived this cost is minimal. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #4106
1792 lines
44 KiB
C
1792 lines
44 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
/*
|
|
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2012, 2014 by Delphix. All rights reserved.
|
|
*/
|
|
|
|
/* Portions Copyright 2010 Robert Milkowski */
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sysmacros.h>
|
|
#include <sys/kmem.h>
|
|
#include <sys/pathname.h>
|
|
#include <sys/vnode.h>
|
|
#include <sys/vfs.h>
|
|
#include <sys/vfs_opreg.h>
|
|
#include <sys/mntent.h>
|
|
#include <sys/mount.h>
|
|
#include <sys/cmn_err.h>
|
|
#include "fs/fs_subr.h"
|
|
#include <sys/zfs_znode.h>
|
|
#include <sys/zfs_vnops.h>
|
|
#include <sys/zfs_dir.h>
|
|
#include <sys/zil.h>
|
|
#include <sys/fs/zfs.h>
|
|
#include <sys/dmu.h>
|
|
#include <sys/dsl_prop.h>
|
|
#include <sys/dsl_dataset.h>
|
|
#include <sys/dsl_deleg.h>
|
|
#include <sys/spa.h>
|
|
#include <sys/zap.h>
|
|
#include <sys/sa.h>
|
|
#include <sys/sa_impl.h>
|
|
#include <sys/varargs.h>
|
|
#include <sys/policy.h>
|
|
#include <sys/atomic.h>
|
|
#include <sys/mkdev.h>
|
|
#include <sys/modctl.h>
|
|
#include <sys/refstr.h>
|
|
#include <sys/zfs_ioctl.h>
|
|
#include <sys/zfs_ctldir.h>
|
|
#include <sys/zfs_fuid.h>
|
|
#include <sys/bootconf.h>
|
|
#include <sys/sunddi.h>
|
|
#include <sys/dnlc.h>
|
|
#include <sys/dmu_objset.h>
|
|
#include <sys/spa_boot.h>
|
|
#include <sys/zpl.h>
|
|
#include "zfs_comutil.h"
|
|
|
|
/*ARGSUSED*/
|
|
int
|
|
zfs_sync(struct super_block *sb, int wait, cred_t *cr)
|
|
{
|
|
zfs_sb_t *zsb = sb->s_fs_info;
|
|
|
|
/*
|
|
* Data integrity is job one. We don't want a compromised kernel
|
|
* writing to the storage pool, so we never sync during panic.
|
|
*/
|
|
if (unlikely(oops_in_progress))
|
|
return (0);
|
|
|
|
/*
|
|
* Semantically, the only requirement is that the sync be initiated.
|
|
* The DMU syncs out txgs frequently, so there's nothing to do.
|
|
*/
|
|
if (!wait)
|
|
return (0);
|
|
|
|
if (zsb != NULL) {
|
|
/*
|
|
* Sync a specific filesystem.
|
|
*/
|
|
dsl_pool_t *dp;
|
|
|
|
ZFS_ENTER(zsb);
|
|
dp = dmu_objset_pool(zsb->z_os);
|
|
|
|
/*
|
|
* If the system is shutting down, then skip any
|
|
* filesystems which may exist on a suspended pool.
|
|
*/
|
|
if (spa_suspended(dp->dp_spa)) {
|
|
ZFS_EXIT(zsb);
|
|
return (0);
|
|
}
|
|
|
|
if (zsb->z_log != NULL)
|
|
zil_commit(zsb->z_log, 0);
|
|
|
|
ZFS_EXIT(zsb);
|
|
} else {
|
|
/*
|
|
* Sync all ZFS filesystems. This is what happens when you
|
|
* run sync(1M). Unlike other filesystems, ZFS honors the
|
|
* request by waiting for all pools to commit all dirty data.
|
|
*/
|
|
spa_sync_allpools();
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_sync);
|
|
|
|
boolean_t
|
|
zfs_is_readonly(zfs_sb_t *zsb)
|
|
{
|
|
return (!!(zsb->z_sb->s_flags & MS_RDONLY));
|
|
}
|
|
EXPORT_SYMBOL(zfs_is_readonly);
|
|
|
|
static void
|
|
atime_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
((zfs_sb_t *)arg)->z_atime = newval;
|
|
}
|
|
|
|
static void
|
|
relatime_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
((zfs_sb_t *)arg)->z_relatime = newval;
|
|
}
|
|
|
|
static void
|
|
xattr_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
zfs_sb_t *zsb = arg;
|
|
|
|
if (newval == ZFS_XATTR_OFF) {
|
|
zsb->z_flags &= ~ZSB_XATTR;
|
|
} else {
|
|
zsb->z_flags |= ZSB_XATTR;
|
|
|
|
if (newval == ZFS_XATTR_SA)
|
|
zsb->z_xattr_sa = B_TRUE;
|
|
else
|
|
zsb->z_xattr_sa = B_FALSE;
|
|
}
|
|
}
|
|
|
|
static void
|
|
acltype_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
zfs_sb_t *zsb = arg;
|
|
|
|
switch (newval) {
|
|
case ZFS_ACLTYPE_OFF:
|
|
zsb->z_acl_type = ZFS_ACLTYPE_OFF;
|
|
zsb->z_sb->s_flags &= ~MS_POSIXACL;
|
|
break;
|
|
case ZFS_ACLTYPE_POSIXACL:
|
|
#ifdef CONFIG_FS_POSIX_ACL
|
|
zsb->z_acl_type = ZFS_ACLTYPE_POSIXACL;
|
|
zsb->z_sb->s_flags |= MS_POSIXACL;
|
|
#else
|
|
zsb->z_acl_type = ZFS_ACLTYPE_OFF;
|
|
zsb->z_sb->s_flags &= ~MS_POSIXACL;
|
|
#endif /* CONFIG_FS_POSIX_ACL */
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
blksz_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
zfs_sb_t *zsb = arg;
|
|
ASSERT3U(newval, <=, spa_maxblocksize(dmu_objset_spa(zsb->z_os)));
|
|
ASSERT3U(newval, >=, SPA_MINBLOCKSIZE);
|
|
ASSERT(ISP2(newval));
|
|
|
|
zsb->z_max_blksz = newval;
|
|
}
|
|
|
|
static void
|
|
readonly_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
zfs_sb_t *zsb = arg;
|
|
struct super_block *sb = zsb->z_sb;
|
|
|
|
if (sb == NULL)
|
|
return;
|
|
|
|
if (newval)
|
|
sb->s_flags |= MS_RDONLY;
|
|
else
|
|
sb->s_flags &= ~MS_RDONLY;
|
|
}
|
|
|
|
static void
|
|
devices_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
}
|
|
|
|
static void
|
|
setuid_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
}
|
|
|
|
static void
|
|
exec_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
}
|
|
|
|
static void
|
|
nbmand_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
zfs_sb_t *zsb = arg;
|
|
struct super_block *sb = zsb->z_sb;
|
|
|
|
if (sb == NULL)
|
|
return;
|
|
|
|
if (newval == TRUE)
|
|
sb->s_flags |= MS_MANDLOCK;
|
|
else
|
|
sb->s_flags &= ~MS_MANDLOCK;
|
|
}
|
|
|
|
static void
|
|
snapdir_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
((zfs_sb_t *)arg)->z_show_ctldir = newval;
|
|
}
|
|
|
|
static void
|
|
vscan_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
((zfs_sb_t *)arg)->z_vscan = newval;
|
|
}
|
|
|
|
static void
|
|
acl_inherit_changed_cb(void *arg, uint64_t newval)
|
|
{
|
|
((zfs_sb_t *)arg)->z_acl_inherit = newval;
|
|
}
|
|
|
|
int
|
|
zfs_register_callbacks(zfs_sb_t *zsb)
|
|
{
|
|
struct dsl_dataset *ds = NULL;
|
|
objset_t *os = zsb->z_os;
|
|
zfs_mntopts_t *zmo = zsb->z_mntopts;
|
|
int error = 0;
|
|
|
|
ASSERT(zsb);
|
|
ASSERT(zmo);
|
|
|
|
/*
|
|
* The act of registering our callbacks will destroy any mount
|
|
* options we may have. In order to enable temporary overrides
|
|
* of mount options, we stash away the current values and
|
|
* restore them after we register the callbacks.
|
|
*/
|
|
if (zfs_is_readonly(zsb) || !spa_writeable(dmu_objset_spa(os))) {
|
|
zmo->z_do_readonly = B_TRUE;
|
|
zmo->z_readonly = B_TRUE;
|
|
}
|
|
|
|
/*
|
|
* Register property callbacks.
|
|
*
|
|
* It would probably be fine to just check for i/o error from
|
|
* the first prop_register(), but I guess I like to go
|
|
* overboard...
|
|
*/
|
|
ds = dmu_objset_ds(os);
|
|
dsl_pool_config_enter(dmu_objset_pool(os), FTAG);
|
|
error = dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_ATIME), atime_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_RELATIME), relatime_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_XATTR), xattr_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_RECORDSIZE), blksz_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_READONLY), readonly_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_DEVICES), devices_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_SETUID), setuid_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_EXEC), exec_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_SNAPDIR), snapdir_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_ACLTYPE), acltype_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_ACLINHERIT), acl_inherit_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_VSCAN), vscan_changed_cb, zsb);
|
|
error = error ? error : dsl_prop_register(ds,
|
|
zfs_prop_to_name(ZFS_PROP_NBMAND), nbmand_changed_cb, zsb);
|
|
dsl_pool_config_exit(dmu_objset_pool(os), FTAG);
|
|
if (error)
|
|
goto unregister;
|
|
|
|
/*
|
|
* Invoke our callbacks to restore temporary mount options.
|
|
*/
|
|
if (zmo->z_do_readonly)
|
|
readonly_changed_cb(zsb, zmo->z_readonly);
|
|
if (zmo->z_do_setuid)
|
|
setuid_changed_cb(zsb, zmo->z_setuid);
|
|
if (zmo->z_do_exec)
|
|
exec_changed_cb(zsb, zmo->z_exec);
|
|
if (zmo->z_do_devices)
|
|
devices_changed_cb(zsb, zmo->z_devices);
|
|
if (zmo->z_do_xattr)
|
|
xattr_changed_cb(zsb, zmo->z_xattr);
|
|
if (zmo->z_do_atime)
|
|
atime_changed_cb(zsb, zmo->z_atime);
|
|
if (zmo->z_do_relatime)
|
|
relatime_changed_cb(zsb, zmo->z_relatime);
|
|
if (zmo->z_do_nbmand)
|
|
nbmand_changed_cb(zsb, zmo->z_nbmand);
|
|
|
|
return (0);
|
|
|
|
unregister:
|
|
dsl_prop_unregister_all(ds, zsb);
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_register_callbacks);
|
|
|
|
static int
|
|
zfs_space_delta_cb(dmu_object_type_t bonustype, void *data,
|
|
uint64_t *userp, uint64_t *groupp)
|
|
{
|
|
/*
|
|
* Is it a valid type of object to track?
|
|
*/
|
|
if (bonustype != DMU_OT_ZNODE && bonustype != DMU_OT_SA)
|
|
return (SET_ERROR(ENOENT));
|
|
|
|
/*
|
|
* If we have a NULL data pointer
|
|
* then assume the id's aren't changing and
|
|
* return EEXIST to the dmu to let it know to
|
|
* use the same ids
|
|
*/
|
|
if (data == NULL)
|
|
return (SET_ERROR(EEXIST));
|
|
|
|
if (bonustype == DMU_OT_ZNODE) {
|
|
znode_phys_t *znp = data;
|
|
*userp = znp->zp_uid;
|
|
*groupp = znp->zp_gid;
|
|
} else {
|
|
int hdrsize;
|
|
sa_hdr_phys_t *sap = data;
|
|
sa_hdr_phys_t sa = *sap;
|
|
boolean_t swap = B_FALSE;
|
|
|
|
ASSERT(bonustype == DMU_OT_SA);
|
|
|
|
if (sa.sa_magic == 0) {
|
|
/*
|
|
* This should only happen for newly created
|
|
* files that haven't had the znode data filled
|
|
* in yet.
|
|
*/
|
|
*userp = 0;
|
|
*groupp = 0;
|
|
return (0);
|
|
}
|
|
if (sa.sa_magic == BSWAP_32(SA_MAGIC)) {
|
|
sa.sa_magic = SA_MAGIC;
|
|
sa.sa_layout_info = BSWAP_16(sa.sa_layout_info);
|
|
swap = B_TRUE;
|
|
} else {
|
|
VERIFY3U(sa.sa_magic, ==, SA_MAGIC);
|
|
}
|
|
|
|
hdrsize = sa_hdrsize(&sa);
|
|
VERIFY3U(hdrsize, >=, sizeof (sa_hdr_phys_t));
|
|
*userp = *((uint64_t *)((uintptr_t)data + hdrsize +
|
|
SA_UID_OFFSET));
|
|
*groupp = *((uint64_t *)((uintptr_t)data + hdrsize +
|
|
SA_GID_OFFSET));
|
|
if (swap) {
|
|
*userp = BSWAP_64(*userp);
|
|
*groupp = BSWAP_64(*groupp);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
fuidstr_to_sid(zfs_sb_t *zsb, const char *fuidstr,
|
|
char *domainbuf, int buflen, uid_t *ridp)
|
|
{
|
|
uint64_t fuid;
|
|
const char *domain;
|
|
|
|
fuid = strtonum(fuidstr, NULL);
|
|
|
|
domain = zfs_fuid_find_by_idx(zsb, FUID_INDEX(fuid));
|
|
if (domain)
|
|
(void) strlcpy(domainbuf, domain, buflen);
|
|
else
|
|
domainbuf[0] = '\0';
|
|
*ridp = FUID_RID(fuid);
|
|
}
|
|
|
|
static uint64_t
|
|
zfs_userquota_prop_to_obj(zfs_sb_t *zsb, zfs_userquota_prop_t type)
|
|
{
|
|
switch (type) {
|
|
case ZFS_PROP_USERUSED:
|
|
return (DMU_USERUSED_OBJECT);
|
|
case ZFS_PROP_GROUPUSED:
|
|
return (DMU_GROUPUSED_OBJECT);
|
|
case ZFS_PROP_USERQUOTA:
|
|
return (zsb->z_userquota_obj);
|
|
case ZFS_PROP_GROUPQUOTA:
|
|
return (zsb->z_groupquota_obj);
|
|
default:
|
|
return (SET_ERROR(ENOTSUP));
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
zfs_userspace_many(zfs_sb_t *zsb, zfs_userquota_prop_t type,
|
|
uint64_t *cookiep, void *vbuf, uint64_t *bufsizep)
|
|
{
|
|
int error;
|
|
zap_cursor_t zc;
|
|
zap_attribute_t za;
|
|
zfs_useracct_t *buf = vbuf;
|
|
uint64_t obj;
|
|
|
|
if (!dmu_objset_userspace_present(zsb->z_os))
|
|
return (SET_ERROR(ENOTSUP));
|
|
|
|
obj = zfs_userquota_prop_to_obj(zsb, type);
|
|
if (obj == 0) {
|
|
*bufsizep = 0;
|
|
return (0);
|
|
}
|
|
|
|
for (zap_cursor_init_serialized(&zc, zsb->z_os, obj, *cookiep);
|
|
(error = zap_cursor_retrieve(&zc, &za)) == 0;
|
|
zap_cursor_advance(&zc)) {
|
|
if ((uintptr_t)buf - (uintptr_t)vbuf + sizeof (zfs_useracct_t) >
|
|
*bufsizep)
|
|
break;
|
|
|
|
fuidstr_to_sid(zsb, za.za_name,
|
|
buf->zu_domain, sizeof (buf->zu_domain), &buf->zu_rid);
|
|
|
|
buf->zu_space = za.za_first_integer;
|
|
buf++;
|
|
}
|
|
if (error == ENOENT)
|
|
error = 0;
|
|
|
|
ASSERT3U((uintptr_t)buf - (uintptr_t)vbuf, <=, *bufsizep);
|
|
*bufsizep = (uintptr_t)buf - (uintptr_t)vbuf;
|
|
*cookiep = zap_cursor_serialize(&zc);
|
|
zap_cursor_fini(&zc);
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_userspace_many);
|
|
|
|
/*
|
|
* buf must be big enough (eg, 32 bytes)
|
|
*/
|
|
static int
|
|
id_to_fuidstr(zfs_sb_t *zsb, const char *domain, uid_t rid,
|
|
char *buf, boolean_t addok)
|
|
{
|
|
uint64_t fuid;
|
|
int domainid = 0;
|
|
|
|
if (domain && domain[0]) {
|
|
domainid = zfs_fuid_find_by_domain(zsb, domain, NULL, addok);
|
|
if (domainid == -1)
|
|
return (SET_ERROR(ENOENT));
|
|
}
|
|
fuid = FUID_ENCODE(domainid, rid);
|
|
(void) sprintf(buf, "%llx", (longlong_t)fuid);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
zfs_userspace_one(zfs_sb_t *zsb, zfs_userquota_prop_t type,
|
|
const char *domain, uint64_t rid, uint64_t *valp)
|
|
{
|
|
char buf[32];
|
|
int err;
|
|
uint64_t obj;
|
|
|
|
*valp = 0;
|
|
|
|
if (!dmu_objset_userspace_present(zsb->z_os))
|
|
return (SET_ERROR(ENOTSUP));
|
|
|
|
obj = zfs_userquota_prop_to_obj(zsb, type);
|
|
if (obj == 0)
|
|
return (0);
|
|
|
|
err = id_to_fuidstr(zsb, domain, rid, buf, B_FALSE);
|
|
if (err)
|
|
return (err);
|
|
|
|
err = zap_lookup(zsb->z_os, obj, buf, 8, 1, valp);
|
|
if (err == ENOENT)
|
|
err = 0;
|
|
return (err);
|
|
}
|
|
EXPORT_SYMBOL(zfs_userspace_one);
|
|
|
|
int
|
|
zfs_set_userquota(zfs_sb_t *zsb, zfs_userquota_prop_t type,
|
|
const char *domain, uint64_t rid, uint64_t quota)
|
|
{
|
|
char buf[32];
|
|
int err;
|
|
dmu_tx_t *tx;
|
|
uint64_t *objp;
|
|
boolean_t fuid_dirtied;
|
|
|
|
if (type != ZFS_PROP_USERQUOTA && type != ZFS_PROP_GROUPQUOTA)
|
|
return (SET_ERROR(EINVAL));
|
|
|
|
if (zsb->z_version < ZPL_VERSION_USERSPACE)
|
|
return (SET_ERROR(ENOTSUP));
|
|
|
|
objp = (type == ZFS_PROP_USERQUOTA) ? &zsb->z_userquota_obj :
|
|
&zsb->z_groupquota_obj;
|
|
|
|
err = id_to_fuidstr(zsb, domain, rid, buf, B_TRUE);
|
|
if (err)
|
|
return (err);
|
|
fuid_dirtied = zsb->z_fuid_dirty;
|
|
|
|
tx = dmu_tx_create(zsb->z_os);
|
|
dmu_tx_hold_zap(tx, *objp ? *objp : DMU_NEW_OBJECT, B_TRUE, NULL);
|
|
if (*objp == 0) {
|
|
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_TRUE,
|
|
zfs_userquota_prop_prefixes[type]);
|
|
}
|
|
if (fuid_dirtied)
|
|
zfs_fuid_txhold(zsb, tx);
|
|
err = dmu_tx_assign(tx, TXG_WAIT);
|
|
if (err) {
|
|
dmu_tx_abort(tx);
|
|
return (err);
|
|
}
|
|
|
|
mutex_enter(&zsb->z_lock);
|
|
if (*objp == 0) {
|
|
*objp = zap_create(zsb->z_os, DMU_OT_USERGROUP_QUOTA,
|
|
DMU_OT_NONE, 0, tx);
|
|
VERIFY(0 == zap_add(zsb->z_os, MASTER_NODE_OBJ,
|
|
zfs_userquota_prop_prefixes[type], 8, 1, objp, tx));
|
|
}
|
|
mutex_exit(&zsb->z_lock);
|
|
|
|
if (quota == 0) {
|
|
err = zap_remove(zsb->z_os, *objp, buf, tx);
|
|
if (err == ENOENT)
|
|
err = 0;
|
|
} else {
|
|
err = zap_update(zsb->z_os, *objp, buf, 8, 1, "a, tx);
|
|
}
|
|
ASSERT(err == 0);
|
|
if (fuid_dirtied)
|
|
zfs_fuid_sync(zsb, tx);
|
|
dmu_tx_commit(tx);
|
|
return (err);
|
|
}
|
|
EXPORT_SYMBOL(zfs_set_userquota);
|
|
|
|
boolean_t
|
|
zfs_fuid_overquota(zfs_sb_t *zsb, boolean_t isgroup, uint64_t fuid)
|
|
{
|
|
char buf[32];
|
|
uint64_t used, quota, usedobj, quotaobj;
|
|
int err;
|
|
|
|
usedobj = isgroup ? DMU_GROUPUSED_OBJECT : DMU_USERUSED_OBJECT;
|
|
quotaobj = isgroup ? zsb->z_groupquota_obj : zsb->z_userquota_obj;
|
|
|
|
if (quotaobj == 0 || zsb->z_replay)
|
|
return (B_FALSE);
|
|
|
|
(void) sprintf(buf, "%llx", (longlong_t)fuid);
|
|
err = zap_lookup(zsb->z_os, quotaobj, buf, 8, 1, "a);
|
|
if (err != 0)
|
|
return (B_FALSE);
|
|
|
|
err = zap_lookup(zsb->z_os, usedobj, buf, 8, 1, &used);
|
|
if (err != 0)
|
|
return (B_FALSE);
|
|
return (used >= quota);
|
|
}
|
|
EXPORT_SYMBOL(zfs_fuid_overquota);
|
|
|
|
boolean_t
|
|
zfs_owner_overquota(zfs_sb_t *zsb, znode_t *zp, boolean_t isgroup)
|
|
{
|
|
uint64_t fuid;
|
|
uint64_t quotaobj;
|
|
|
|
quotaobj = isgroup ? zsb->z_groupquota_obj : zsb->z_userquota_obj;
|
|
|
|
fuid = isgroup ? zp->z_gid : zp->z_uid;
|
|
|
|
if (quotaobj == 0 || zsb->z_replay)
|
|
return (B_FALSE);
|
|
|
|
return (zfs_fuid_overquota(zsb, isgroup, fuid));
|
|
}
|
|
EXPORT_SYMBOL(zfs_owner_overquota);
|
|
|
|
zfs_mntopts_t *
|
|
zfs_mntopts_alloc(void)
|
|
{
|
|
return (kmem_zalloc(sizeof (zfs_mntopts_t), KM_SLEEP));
|
|
}
|
|
|
|
void
|
|
zfs_mntopts_free(zfs_mntopts_t *zmo)
|
|
{
|
|
if (zmo->z_osname)
|
|
strfree(zmo->z_osname);
|
|
|
|
if (zmo->z_mntpoint)
|
|
strfree(zmo->z_mntpoint);
|
|
|
|
kmem_free(zmo, sizeof (zfs_mntopts_t));
|
|
}
|
|
|
|
int
|
|
zfs_sb_create(const char *osname, zfs_mntopts_t *zmo, zfs_sb_t **zsbp)
|
|
{
|
|
objset_t *os;
|
|
zfs_sb_t *zsb;
|
|
uint64_t zval;
|
|
int i, size, error;
|
|
uint64_t sa_obj;
|
|
|
|
zsb = kmem_zalloc(sizeof (zfs_sb_t), KM_SLEEP);
|
|
|
|
/*
|
|
* We claim to always be readonly so we can open snapshots;
|
|
* other ZPL code will prevent us from writing to snapshots.
|
|
*/
|
|
error = dmu_objset_own(osname, DMU_OST_ZFS, B_TRUE, zsb, &os);
|
|
if (error) {
|
|
kmem_free(zsb, sizeof (zfs_sb_t));
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Optional temporary mount options, free'd in zfs_sb_free().
|
|
*/
|
|
zsb->z_mntopts = (zmo ? zmo : zfs_mntopts_alloc());
|
|
|
|
/*
|
|
* Initialize the zfs-specific filesystem structure.
|
|
* Should probably make this a kmem cache, shuffle fields.
|
|
*/
|
|
zsb->z_sb = NULL;
|
|
zsb->z_parent = zsb;
|
|
zsb->z_max_blksz = SPA_OLD_MAXBLOCKSIZE;
|
|
zsb->z_show_ctldir = ZFS_SNAPDIR_VISIBLE;
|
|
zsb->z_os = os;
|
|
|
|
error = zfs_get_zplprop(os, ZFS_PROP_VERSION, &zsb->z_version);
|
|
if (error) {
|
|
goto out;
|
|
} else if (zsb->z_version > ZPL_VERSION) {
|
|
error = SET_ERROR(ENOTSUP);
|
|
goto out;
|
|
}
|
|
if ((error = zfs_get_zplprop(os, ZFS_PROP_NORMALIZE, &zval)) != 0)
|
|
goto out;
|
|
zsb->z_norm = (int)zval;
|
|
|
|
if ((error = zfs_get_zplprop(os, ZFS_PROP_UTF8ONLY, &zval)) != 0)
|
|
goto out;
|
|
zsb->z_utf8 = (zval != 0);
|
|
|
|
if ((error = zfs_get_zplprop(os, ZFS_PROP_CASE, &zval)) != 0)
|
|
goto out;
|
|
zsb->z_case = (uint_t)zval;
|
|
|
|
if ((error = zfs_get_zplprop(os, ZFS_PROP_ACLTYPE, &zval)) != 0)
|
|
goto out;
|
|
zsb->z_acl_type = (uint_t)zval;
|
|
|
|
/*
|
|
* Fold case on file systems that are always or sometimes case
|
|
* insensitive.
|
|
*/
|
|
if (zsb->z_case == ZFS_CASE_INSENSITIVE ||
|
|
zsb->z_case == ZFS_CASE_MIXED)
|
|
zsb->z_norm |= U8_TEXTPREP_TOUPPER;
|
|
|
|
zsb->z_use_fuids = USE_FUIDS(zsb->z_version, zsb->z_os);
|
|
zsb->z_use_sa = USE_SA(zsb->z_version, zsb->z_os);
|
|
|
|
if (zsb->z_use_sa) {
|
|
/* should either have both of these objects or none */
|
|
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_SA_ATTRS, 8, 1,
|
|
&sa_obj);
|
|
if (error)
|
|
goto out;
|
|
|
|
error = zfs_get_zplprop(os, ZFS_PROP_XATTR, &zval);
|
|
if ((error == 0) && (zval == ZFS_XATTR_SA))
|
|
zsb->z_xattr_sa = B_TRUE;
|
|
} else {
|
|
/*
|
|
* Pre SA versions file systems should never touch
|
|
* either the attribute registration or layout objects.
|
|
*/
|
|
sa_obj = 0;
|
|
}
|
|
|
|
error = sa_setup(os, sa_obj, zfs_attr_table, ZPL_END,
|
|
&zsb->z_attr_table);
|
|
if (error)
|
|
goto out;
|
|
|
|
if (zsb->z_version >= ZPL_VERSION_SA)
|
|
sa_register_update_callback(os, zfs_sa_upgrade);
|
|
|
|
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_ROOT_OBJ, 8, 1,
|
|
&zsb->z_root);
|
|
if (error)
|
|
goto out;
|
|
ASSERT(zsb->z_root != 0);
|
|
|
|
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_UNLINKED_SET, 8, 1,
|
|
&zsb->z_unlinkedobj);
|
|
if (error)
|
|
goto out;
|
|
|
|
error = zap_lookup(os, MASTER_NODE_OBJ,
|
|
zfs_userquota_prop_prefixes[ZFS_PROP_USERQUOTA],
|
|
8, 1, &zsb->z_userquota_obj);
|
|
if (error && error != ENOENT)
|
|
goto out;
|
|
|
|
error = zap_lookup(os, MASTER_NODE_OBJ,
|
|
zfs_userquota_prop_prefixes[ZFS_PROP_GROUPQUOTA],
|
|
8, 1, &zsb->z_groupquota_obj);
|
|
if (error && error != ENOENT)
|
|
goto out;
|
|
|
|
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_FUID_TABLES, 8, 1,
|
|
&zsb->z_fuid_obj);
|
|
if (error && error != ENOENT)
|
|
goto out;
|
|
|
|
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_SHARES_DIR, 8, 1,
|
|
&zsb->z_shares_dir);
|
|
if (error && error != ENOENT)
|
|
goto out;
|
|
|
|
mutex_init(&zsb->z_znodes_lock, NULL, MUTEX_DEFAULT, NULL);
|
|
mutex_init(&zsb->z_lock, NULL, MUTEX_DEFAULT, NULL);
|
|
list_create(&zsb->z_all_znodes, sizeof (znode_t),
|
|
offsetof(znode_t, z_link_node));
|
|
rrm_init(&zsb->z_teardown_lock, B_FALSE);
|
|
rw_init(&zsb->z_teardown_inactive_lock, NULL, RW_DEFAULT, NULL);
|
|
rw_init(&zsb->z_fuid_lock, NULL, RW_DEFAULT, NULL);
|
|
|
|
size = MIN(1 << (highbit64(zfs_object_mutex_size)-1), ZFS_OBJ_MTX_MAX);
|
|
zsb->z_hold_size = size;
|
|
zsb->z_hold_trees = vmem_zalloc(sizeof (avl_tree_t) * size, KM_SLEEP);
|
|
zsb->z_hold_locks = vmem_zalloc(sizeof (kmutex_t) * size, KM_SLEEP);
|
|
for (i = 0; i != size; i++) {
|
|
avl_create(&zsb->z_hold_trees[i], zfs_znode_hold_compare,
|
|
sizeof (znode_hold_t), offsetof(znode_hold_t, zh_node));
|
|
mutex_init(&zsb->z_hold_locks[i], NULL, MUTEX_DEFAULT, NULL);
|
|
}
|
|
|
|
*zsbp = zsb;
|
|
return (0);
|
|
|
|
out:
|
|
dmu_objset_disown(os, zsb);
|
|
*zsbp = NULL;
|
|
|
|
kmem_free(zsb, sizeof (zfs_sb_t));
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_sb_create);
|
|
|
|
int
|
|
zfs_sb_setup(zfs_sb_t *zsb, boolean_t mounting)
|
|
{
|
|
int error;
|
|
|
|
error = zfs_register_callbacks(zsb);
|
|
if (error)
|
|
return (error);
|
|
|
|
/*
|
|
* Set the objset user_ptr to track its zsb.
|
|
*/
|
|
mutex_enter(&zsb->z_os->os_user_ptr_lock);
|
|
dmu_objset_set_user(zsb->z_os, zsb);
|
|
mutex_exit(&zsb->z_os->os_user_ptr_lock);
|
|
|
|
zsb->z_log = zil_open(zsb->z_os, zfs_get_data);
|
|
|
|
/*
|
|
* If we are not mounting (ie: online recv), then we don't
|
|
* have to worry about replaying the log as we blocked all
|
|
* operations out since we closed the ZIL.
|
|
*/
|
|
if (mounting) {
|
|
boolean_t readonly;
|
|
|
|
/*
|
|
* During replay we remove the read only flag to
|
|
* allow replays to succeed.
|
|
*/
|
|
readonly = zfs_is_readonly(zsb);
|
|
if (readonly != 0)
|
|
readonly_changed_cb(zsb, B_FALSE);
|
|
else
|
|
zfs_unlinked_drain(zsb);
|
|
|
|
/*
|
|
* Parse and replay the intent log.
|
|
*
|
|
* Because of ziltest, this must be done after
|
|
* zfs_unlinked_drain(). (Further note: ziltest
|
|
* doesn't use readonly mounts, where
|
|
* zfs_unlinked_drain() isn't called.) This is because
|
|
* ziltest causes spa_sync() to think it's committed,
|
|
* but actually it is not, so the intent log contains
|
|
* many txg's worth of changes.
|
|
*
|
|
* In particular, if object N is in the unlinked set in
|
|
* the last txg to actually sync, then it could be
|
|
* actually freed in a later txg and then reallocated
|
|
* in a yet later txg. This would write a "create
|
|
* object N" record to the intent log. Normally, this
|
|
* would be fine because the spa_sync() would have
|
|
* written out the fact that object N is free, before
|
|
* we could write the "create object N" intent log
|
|
* record.
|
|
*
|
|
* But when we are in ziltest mode, we advance the "open
|
|
* txg" without actually spa_sync()-ing the changes to
|
|
* disk. So we would see that object N is still
|
|
* allocated and in the unlinked set, and there is an
|
|
* intent log record saying to allocate it.
|
|
*/
|
|
if (spa_writeable(dmu_objset_spa(zsb->z_os))) {
|
|
if (zil_replay_disable) {
|
|
zil_destroy(zsb->z_log, B_FALSE);
|
|
} else {
|
|
zsb->z_replay = B_TRUE;
|
|
zil_replay(zsb->z_os, zsb,
|
|
zfs_replay_vector);
|
|
zsb->z_replay = B_FALSE;
|
|
}
|
|
}
|
|
|
|
/* restore readonly bit */
|
|
if (readonly != 0)
|
|
readonly_changed_cb(zsb, B_TRUE);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_sb_setup);
|
|
|
|
void
|
|
zfs_sb_free(zfs_sb_t *zsb)
|
|
{
|
|
int i, size = zsb->z_hold_size;
|
|
|
|
zfs_fuid_destroy(zsb);
|
|
|
|
mutex_destroy(&zsb->z_znodes_lock);
|
|
mutex_destroy(&zsb->z_lock);
|
|
list_destroy(&zsb->z_all_znodes);
|
|
rrm_destroy(&zsb->z_teardown_lock);
|
|
rw_destroy(&zsb->z_teardown_inactive_lock);
|
|
rw_destroy(&zsb->z_fuid_lock);
|
|
for (i = 0; i != size; i++) {
|
|
avl_destroy(&zsb->z_hold_trees[i]);
|
|
mutex_destroy(&zsb->z_hold_locks[i]);
|
|
}
|
|
vmem_free(zsb->z_hold_trees, sizeof (avl_tree_t) * size);
|
|
vmem_free(zsb->z_hold_locks, sizeof (kmutex_t) * size);
|
|
zfs_mntopts_free(zsb->z_mntopts);
|
|
kmem_free(zsb, sizeof (zfs_sb_t));
|
|
}
|
|
EXPORT_SYMBOL(zfs_sb_free);
|
|
|
|
static void
|
|
zfs_set_fuid_feature(zfs_sb_t *zsb)
|
|
{
|
|
zsb->z_use_fuids = USE_FUIDS(zsb->z_version, zsb->z_os);
|
|
zsb->z_use_sa = USE_SA(zsb->z_version, zsb->z_os);
|
|
}
|
|
|
|
void
|
|
zfs_unregister_callbacks(zfs_sb_t *zsb)
|
|
{
|
|
objset_t *os = zsb->z_os;
|
|
|
|
if (!dmu_objset_is_snapshot(os))
|
|
dsl_prop_unregister_all(dmu_objset_ds(os), zsb);
|
|
}
|
|
EXPORT_SYMBOL(zfs_unregister_callbacks);
|
|
|
|
#ifdef HAVE_MLSLABEL
|
|
/*
|
|
* Check that the hex label string is appropriate for the dataset being
|
|
* mounted into the global_zone proper.
|
|
*
|
|
* Return an error if the hex label string is not default or
|
|
* admin_low/admin_high. For admin_low labels, the corresponding
|
|
* dataset must be readonly.
|
|
*/
|
|
int
|
|
zfs_check_global_label(const char *dsname, const char *hexsl)
|
|
{
|
|
if (strcasecmp(hexsl, ZFS_MLSLABEL_DEFAULT) == 0)
|
|
return (0);
|
|
if (strcasecmp(hexsl, ADMIN_HIGH) == 0)
|
|
return (0);
|
|
if (strcasecmp(hexsl, ADMIN_LOW) == 0) {
|
|
/* must be readonly */
|
|
uint64_t rdonly;
|
|
|
|
if (dsl_prop_get_integer(dsname,
|
|
zfs_prop_to_name(ZFS_PROP_READONLY), &rdonly, NULL))
|
|
return (SET_ERROR(EACCES));
|
|
return (rdonly ? 0 : EACCES);
|
|
}
|
|
return (SET_ERROR(EACCES));
|
|
}
|
|
EXPORT_SYMBOL(zfs_check_global_label);
|
|
#endif /* HAVE_MLSLABEL */
|
|
|
|
int
|
|
zfs_statvfs(struct dentry *dentry, struct kstatfs *statp)
|
|
{
|
|
zfs_sb_t *zsb = dentry->d_sb->s_fs_info;
|
|
uint64_t refdbytes, availbytes, usedobjs, availobjs;
|
|
uint64_t fsid;
|
|
uint32_t bshift;
|
|
|
|
ZFS_ENTER(zsb);
|
|
|
|
dmu_objset_space(zsb->z_os,
|
|
&refdbytes, &availbytes, &usedobjs, &availobjs);
|
|
|
|
fsid = dmu_objset_fsid_guid(zsb->z_os);
|
|
/*
|
|
* The underlying storage pool actually uses multiple block
|
|
* size. Under Solaris frsize (fragment size) is reported as
|
|
* the smallest block size we support, and bsize (block size)
|
|
* as the filesystem's maximum block size. Unfortunately,
|
|
* under Linux the fragment size and block size are often used
|
|
* interchangeably. Thus we are forced to report both of them
|
|
* as the filesystem's maximum block size.
|
|
*/
|
|
statp->f_frsize = zsb->z_max_blksz;
|
|
statp->f_bsize = zsb->z_max_blksz;
|
|
bshift = fls(statp->f_bsize) - 1;
|
|
|
|
/*
|
|
* The following report "total" blocks of various kinds in
|
|
* the file system, but reported in terms of f_bsize - the
|
|
* "preferred" size.
|
|
*/
|
|
|
|
statp->f_blocks = (refdbytes + availbytes) >> bshift;
|
|
statp->f_bfree = availbytes >> bshift;
|
|
statp->f_bavail = statp->f_bfree; /* no root reservation */
|
|
|
|
/*
|
|
* statvfs() should really be called statufs(), because it assumes
|
|
* static metadata. ZFS doesn't preallocate files, so the best
|
|
* we can do is report the max that could possibly fit in f_files,
|
|
* and that minus the number actually used in f_ffree.
|
|
* For f_ffree, report the smaller of the number of object available
|
|
* and the number of blocks (each object will take at least a block).
|
|
*/
|
|
statp->f_ffree = MIN(availobjs, availbytes >> DNODE_SHIFT);
|
|
statp->f_files = statp->f_ffree + usedobjs;
|
|
statp->f_fsid.val[0] = (uint32_t)fsid;
|
|
statp->f_fsid.val[1] = (uint32_t)(fsid >> 32);
|
|
statp->f_type = ZFS_SUPER_MAGIC;
|
|
statp->f_namelen = ZFS_MAXNAMELEN;
|
|
|
|
/*
|
|
* We have all of 40 characters to stuff a string here.
|
|
* Is there anything useful we could/should provide?
|
|
*/
|
|
bzero(statp->f_spare, sizeof (statp->f_spare));
|
|
|
|
ZFS_EXIT(zsb);
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_statvfs);
|
|
|
|
int
|
|
zfs_root(zfs_sb_t *zsb, struct inode **ipp)
|
|
{
|
|
znode_t *rootzp;
|
|
int error;
|
|
|
|
ZFS_ENTER(zsb);
|
|
|
|
error = zfs_zget(zsb, zsb->z_root, &rootzp);
|
|
if (error == 0)
|
|
*ipp = ZTOI(rootzp);
|
|
|
|
ZFS_EXIT(zsb);
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_root);
|
|
|
|
#if !defined(HAVE_SPLIT_SHRINKER_CALLBACK) && !defined(HAVE_SHRINK) && \
|
|
defined(HAVE_D_PRUNE_ALIASES)
|
|
/*
|
|
* Linux kernels older than 3.1 do not support a per-filesystem shrinker.
|
|
* To accommodate this we must improvise and manually walk the list of znodes
|
|
* attempting to prune dentries in order to be able to drop the inodes.
|
|
*
|
|
* To avoid scanning the same znodes multiple times they are always rotated
|
|
* to the end of the z_all_znodes list. New znodes are inserted at the
|
|
* end of the list so we're always scanning the oldest znodes first.
|
|
*/
|
|
static int
|
|
zfs_sb_prune_aliases(zfs_sb_t *zsb, unsigned long nr_to_scan)
|
|
{
|
|
znode_t **zp_array, *zp;
|
|
int max_array = MIN(nr_to_scan, PAGE_SIZE * 8 / sizeof (znode_t *));
|
|
int objects = 0;
|
|
int i = 0, j = 0;
|
|
|
|
zp_array = kmem_zalloc(max_array * sizeof (znode_t *), KM_SLEEP);
|
|
|
|
mutex_enter(&zsb->z_znodes_lock);
|
|
while ((zp = list_head(&zsb->z_all_znodes)) != NULL) {
|
|
|
|
if ((i++ > nr_to_scan) || (j >= max_array))
|
|
break;
|
|
|
|
ASSERT(list_link_active(&zp->z_link_node));
|
|
list_remove(&zsb->z_all_znodes, zp);
|
|
list_insert_tail(&zsb->z_all_znodes, zp);
|
|
|
|
/* Skip active znodes and .zfs entries */
|
|
if (MUTEX_HELD(&zp->z_lock) || zp->z_is_ctldir)
|
|
continue;
|
|
|
|
if (igrab(ZTOI(zp)) == NULL)
|
|
continue;
|
|
|
|
zp_array[j] = zp;
|
|
j++;
|
|
}
|
|
mutex_exit(&zsb->z_znodes_lock);
|
|
|
|
for (i = 0; i < j; i++) {
|
|
zp = zp_array[i];
|
|
|
|
ASSERT3P(zp, !=, NULL);
|
|
d_prune_aliases(ZTOI(zp));
|
|
|
|
if (atomic_read(&ZTOI(zp)->i_count) == 1)
|
|
objects++;
|
|
|
|
iput(ZTOI(zp));
|
|
}
|
|
|
|
kmem_free(zp_array, max_array * sizeof (znode_t *));
|
|
|
|
return (objects);
|
|
}
|
|
#endif /* HAVE_D_PRUNE_ALIASES */
|
|
|
|
/*
|
|
* The ARC has requested that the filesystem drop entries from the dentry
|
|
* and inode caches. This can occur when the ARC needs to free meta data
|
|
* blocks but can't because they are all pinned by entries in these caches.
|
|
*/
|
|
int
|
|
zfs_sb_prune(struct super_block *sb, unsigned long nr_to_scan, int *objects)
|
|
{
|
|
zfs_sb_t *zsb = sb->s_fs_info;
|
|
int error = 0;
|
|
#if defined(HAVE_SHRINK) || defined(HAVE_SPLIT_SHRINKER_CALLBACK)
|
|
struct shrinker *shrinker = &sb->s_shrink;
|
|
struct shrink_control sc = {
|
|
.nr_to_scan = nr_to_scan,
|
|
.gfp_mask = GFP_KERNEL,
|
|
};
|
|
#endif
|
|
|
|
ZFS_ENTER(zsb);
|
|
|
|
#if defined(HAVE_SPLIT_SHRINKER_CALLBACK) && \
|
|
defined(SHRINK_CONTROL_HAS_NID) && \
|
|
defined(SHRINKER_NUMA_AWARE)
|
|
if (sb->s_shrink.flags & SHRINKER_NUMA_AWARE) {
|
|
*objects = 0;
|
|
for_each_online_node(sc.nid)
|
|
*objects += (*shrinker->scan_objects)(shrinker, &sc);
|
|
} else {
|
|
*objects = (*shrinker->scan_objects)(shrinker, &sc);
|
|
}
|
|
#elif defined(HAVE_SPLIT_SHRINKER_CALLBACK)
|
|
*objects = (*shrinker->scan_objects)(shrinker, &sc);
|
|
#elif defined(HAVE_SHRINK)
|
|
*objects = (*shrinker->shrink)(shrinker, &sc);
|
|
#elif defined(HAVE_D_PRUNE_ALIASES)
|
|
*objects = zfs_sb_prune_aliases(zsb, nr_to_scan);
|
|
#else
|
|
#error "No available dentry and inode cache pruning mechanism."
|
|
#endif
|
|
ZFS_EXIT(zsb);
|
|
|
|
dprintf_ds(zsb->z_os->os_dsl_dataset,
|
|
"pruning, nr_to_scan=%lu objects=%d error=%d\n",
|
|
nr_to_scan, *objects, error);
|
|
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_sb_prune);
|
|
|
|
/*
|
|
* Teardown the zfs_sb_t.
|
|
*
|
|
* Note, if 'unmounting' if FALSE, we return with the 'z_teardown_lock'
|
|
* and 'z_teardown_inactive_lock' held.
|
|
*/
|
|
int
|
|
zfs_sb_teardown(zfs_sb_t *zsb, boolean_t unmounting)
|
|
{
|
|
znode_t *zp;
|
|
|
|
/*
|
|
* If someone has not already unmounted this file system,
|
|
* drain the iput_taskq to ensure all active references to the
|
|
* zfs_sb_t have been handled only then can it be safely destroyed.
|
|
*/
|
|
if (zsb->z_os) {
|
|
/*
|
|
* If we're unmounting we have to wait for the list to
|
|
* drain completely.
|
|
*
|
|
* If we're not unmounting there's no guarantee the list
|
|
* will drain completely, but iputs run from the taskq
|
|
* may add the parents of dir-based xattrs to the taskq
|
|
* so we want to wait for these.
|
|
*
|
|
* We can safely read z_nr_znodes without locking because the
|
|
* VFS has already blocked operations which add to the
|
|
* z_all_znodes list and thus increment z_nr_znodes.
|
|
*/
|
|
int round = 0;
|
|
while (zsb->z_nr_znodes > 0) {
|
|
taskq_wait_outstanding(dsl_pool_iput_taskq(
|
|
dmu_objset_pool(zsb->z_os)), 0);
|
|
if (++round > 1 && !unmounting)
|
|
break;
|
|
}
|
|
}
|
|
|
|
rrm_enter(&zsb->z_teardown_lock, RW_WRITER, FTAG);
|
|
|
|
if (!unmounting) {
|
|
/*
|
|
* We purge the parent filesystem's super block as the
|
|
* parent filesystem and all of its snapshots have their
|
|
* inode's super block set to the parent's filesystem's
|
|
* super block. Note, 'z_parent' is self referential
|
|
* for non-snapshots.
|
|
*/
|
|
shrink_dcache_sb(zsb->z_parent->z_sb);
|
|
}
|
|
|
|
/*
|
|
* Close the zil. NB: Can't close the zil while zfs_inactive
|
|
* threads are blocked as zil_close can call zfs_inactive.
|
|
*/
|
|
if (zsb->z_log) {
|
|
zil_close(zsb->z_log);
|
|
zsb->z_log = NULL;
|
|
}
|
|
|
|
rw_enter(&zsb->z_teardown_inactive_lock, RW_WRITER);
|
|
|
|
/*
|
|
* If we are not unmounting (ie: online recv) and someone already
|
|
* unmounted this file system while we were doing the switcheroo,
|
|
* or a reopen of z_os failed then just bail out now.
|
|
*/
|
|
if (!unmounting && (zsb->z_unmounted || zsb->z_os == NULL)) {
|
|
rw_exit(&zsb->z_teardown_inactive_lock);
|
|
rrm_exit(&zsb->z_teardown_lock, FTAG);
|
|
return (SET_ERROR(EIO));
|
|
}
|
|
|
|
/*
|
|
* At this point there are no VFS ops active, and any new VFS ops
|
|
* will fail with EIO since we have z_teardown_lock for writer (only
|
|
* relevant for forced unmount).
|
|
*
|
|
* Release all holds on dbufs.
|
|
*/
|
|
if (!unmounting) {
|
|
mutex_enter(&zsb->z_znodes_lock);
|
|
for (zp = list_head(&zsb->z_all_znodes); zp != NULL;
|
|
zp = list_next(&zsb->z_all_znodes, zp)) {
|
|
if (zp->z_sa_hdl)
|
|
zfs_znode_dmu_fini(zp);
|
|
}
|
|
mutex_exit(&zsb->z_znodes_lock);
|
|
}
|
|
|
|
/*
|
|
* If we are unmounting, set the unmounted flag and let new VFS ops
|
|
* unblock. zfs_inactive will have the unmounted behavior, and all
|
|
* other VFS ops will fail with EIO.
|
|
*/
|
|
if (unmounting) {
|
|
zsb->z_unmounted = B_TRUE;
|
|
rrm_exit(&zsb->z_teardown_lock, FTAG);
|
|
rw_exit(&zsb->z_teardown_inactive_lock);
|
|
}
|
|
|
|
/*
|
|
* z_os will be NULL if there was an error in attempting to reopen
|
|
* zsb, so just return as the properties had already been
|
|
*
|
|
* unregistered and cached data had been evicted before.
|
|
*/
|
|
if (zsb->z_os == NULL)
|
|
return (0);
|
|
|
|
/*
|
|
* Unregister properties.
|
|
*/
|
|
zfs_unregister_callbacks(zsb);
|
|
|
|
/*
|
|
* Evict cached data
|
|
*/
|
|
if (dsl_dataset_is_dirty(dmu_objset_ds(zsb->z_os)) &&
|
|
!zfs_is_readonly(zsb))
|
|
txg_wait_synced(dmu_objset_pool(zsb->z_os), 0);
|
|
dmu_objset_evict_dbufs(zsb->z_os);
|
|
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_sb_teardown);
|
|
|
|
#if !defined(HAVE_2ARGS_BDI_SETUP_AND_REGISTER) && \
|
|
!defined(HAVE_3ARGS_BDI_SETUP_AND_REGISTER)
|
|
atomic_long_t zfs_bdi_seq = ATOMIC_LONG_INIT(0);
|
|
#endif
|
|
|
|
int
|
|
zfs_domount(struct super_block *sb, zfs_mntopts_t *zmo, int silent)
|
|
{
|
|
const char *osname = zmo->z_osname;
|
|
zfs_sb_t *zsb;
|
|
struct inode *root_inode;
|
|
uint64_t recordsize;
|
|
int error;
|
|
|
|
error = zfs_sb_create(osname, zmo, &zsb);
|
|
if (error)
|
|
return (error);
|
|
|
|
if ((error = dsl_prop_get_integer(osname, "recordsize",
|
|
&recordsize, NULL)))
|
|
goto out;
|
|
|
|
zsb->z_sb = sb;
|
|
sb->s_fs_info = zsb;
|
|
sb->s_magic = ZFS_SUPER_MAGIC;
|
|
sb->s_maxbytes = MAX_LFS_FILESIZE;
|
|
sb->s_time_gran = 1;
|
|
sb->s_blocksize = recordsize;
|
|
sb->s_blocksize_bits = ilog2(recordsize);
|
|
zsb->z_bdi.ra_pages = 0;
|
|
sb->s_bdi = &zsb->z_bdi;
|
|
|
|
error = -zpl_bdi_setup_and_register(&zsb->z_bdi, "zfs");
|
|
if (error)
|
|
goto out;
|
|
|
|
/* Set callback operations for the file system. */
|
|
sb->s_op = &zpl_super_operations;
|
|
sb->s_xattr = zpl_xattr_handlers;
|
|
sb->s_export_op = &zpl_export_operations;
|
|
#ifdef HAVE_S_D_OP
|
|
sb->s_d_op = &zpl_dentry_operations;
|
|
#endif /* HAVE_S_D_OP */
|
|
|
|
/* Set features for file system. */
|
|
zfs_set_fuid_feature(zsb);
|
|
|
|
if (dmu_objset_is_snapshot(zsb->z_os)) {
|
|
uint64_t pval;
|
|
|
|
atime_changed_cb(zsb, B_FALSE);
|
|
readonly_changed_cb(zsb, B_TRUE);
|
|
if ((error = dsl_prop_get_integer(osname,
|
|
"xattr", &pval, NULL)))
|
|
goto out;
|
|
xattr_changed_cb(zsb, pval);
|
|
if ((error = dsl_prop_get_integer(osname,
|
|
"acltype", &pval, NULL)))
|
|
goto out;
|
|
acltype_changed_cb(zsb, pval);
|
|
zsb->z_issnap = B_TRUE;
|
|
zsb->z_os->os_sync = ZFS_SYNC_DISABLED;
|
|
zsb->z_snap_defer_time = jiffies;
|
|
|
|
mutex_enter(&zsb->z_os->os_user_ptr_lock);
|
|
dmu_objset_set_user(zsb->z_os, zsb);
|
|
mutex_exit(&zsb->z_os->os_user_ptr_lock);
|
|
} else {
|
|
error = zfs_sb_setup(zsb, B_TRUE);
|
|
}
|
|
|
|
/* Allocate a root inode for the filesystem. */
|
|
error = zfs_root(zsb, &root_inode);
|
|
if (error) {
|
|
(void) zfs_umount(sb);
|
|
goto out;
|
|
}
|
|
|
|
/* Allocate a root dentry for the filesystem */
|
|
sb->s_root = d_make_root(root_inode);
|
|
if (sb->s_root == NULL) {
|
|
(void) zfs_umount(sb);
|
|
error = SET_ERROR(ENOMEM);
|
|
goto out;
|
|
}
|
|
|
|
if (!zsb->z_issnap)
|
|
zfsctl_create(zsb);
|
|
|
|
zsb->z_arc_prune = arc_add_prune_callback(zpl_prune_sb, sb);
|
|
out:
|
|
if (error) {
|
|
dmu_objset_disown(zsb->z_os, zsb);
|
|
zfs_sb_free(zsb);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_domount);
|
|
|
|
/*
|
|
* Called when an unmount is requested and certain sanity checks have
|
|
* already passed. At this point no dentries or inodes have been reclaimed
|
|
* from their respective caches. We drop the extra reference on the .zfs
|
|
* control directory to allow everything to be reclaimed. All snapshots
|
|
* must already have been unmounted to reach this point.
|
|
*/
|
|
void
|
|
zfs_preumount(struct super_block *sb)
|
|
{
|
|
zfs_sb_t *zsb = sb->s_fs_info;
|
|
|
|
if (zsb)
|
|
zfsctl_destroy(sb->s_fs_info);
|
|
}
|
|
EXPORT_SYMBOL(zfs_preumount);
|
|
|
|
/*
|
|
* Called once all other unmount released tear down has occurred.
|
|
* It is our responsibility to release any remaining infrastructure.
|
|
*/
|
|
/*ARGSUSED*/
|
|
int
|
|
zfs_umount(struct super_block *sb)
|
|
{
|
|
zfs_sb_t *zsb = sb->s_fs_info;
|
|
objset_t *os;
|
|
|
|
arc_remove_prune_callback(zsb->z_arc_prune);
|
|
VERIFY(zfs_sb_teardown(zsb, B_TRUE) == 0);
|
|
os = zsb->z_os;
|
|
bdi_destroy(sb->s_bdi);
|
|
|
|
/*
|
|
* z_os will be NULL if there was an error in
|
|
* attempting to reopen zsb.
|
|
*/
|
|
if (os != NULL) {
|
|
/*
|
|
* Unset the objset user_ptr.
|
|
*/
|
|
mutex_enter(&os->os_user_ptr_lock);
|
|
dmu_objset_set_user(os, NULL);
|
|
mutex_exit(&os->os_user_ptr_lock);
|
|
|
|
/*
|
|
* Finally release the objset
|
|
*/
|
|
dmu_objset_disown(os, zsb);
|
|
}
|
|
|
|
zfs_sb_free(zsb);
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_umount);
|
|
|
|
int
|
|
zfs_remount(struct super_block *sb, int *flags, zfs_mntopts_t *zmo)
|
|
{
|
|
zfs_sb_t *zsb = sb->s_fs_info;
|
|
int error;
|
|
|
|
zfs_unregister_callbacks(zsb);
|
|
error = zfs_register_callbacks(zsb);
|
|
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_remount);
|
|
|
|
int
|
|
zfs_vget(struct super_block *sb, struct inode **ipp, fid_t *fidp)
|
|
{
|
|
zfs_sb_t *zsb = sb->s_fs_info;
|
|
znode_t *zp;
|
|
uint64_t object = 0;
|
|
uint64_t fid_gen = 0;
|
|
uint64_t gen_mask;
|
|
uint64_t zp_gen;
|
|
int i, err;
|
|
|
|
*ipp = NULL;
|
|
|
|
ZFS_ENTER(zsb);
|
|
|
|
if (fidp->fid_len == LONG_FID_LEN) {
|
|
zfid_long_t *zlfid = (zfid_long_t *)fidp;
|
|
uint64_t objsetid = 0;
|
|
uint64_t setgen = 0;
|
|
|
|
for (i = 0; i < sizeof (zlfid->zf_setid); i++)
|
|
objsetid |= ((uint64_t)zlfid->zf_setid[i]) << (8 * i);
|
|
|
|
for (i = 0; i < sizeof (zlfid->zf_setgen); i++)
|
|
setgen |= ((uint64_t)zlfid->zf_setgen[i]) << (8 * i);
|
|
|
|
ZFS_EXIT(zsb);
|
|
|
|
err = zfsctl_lookup_objset(sb, objsetid, &zsb);
|
|
if (err)
|
|
return (SET_ERROR(EINVAL));
|
|
|
|
ZFS_ENTER(zsb);
|
|
}
|
|
|
|
if (fidp->fid_len == SHORT_FID_LEN || fidp->fid_len == LONG_FID_LEN) {
|
|
zfid_short_t *zfid = (zfid_short_t *)fidp;
|
|
|
|
for (i = 0; i < sizeof (zfid->zf_object); i++)
|
|
object |= ((uint64_t)zfid->zf_object[i]) << (8 * i);
|
|
|
|
for (i = 0; i < sizeof (zfid->zf_gen); i++)
|
|
fid_gen |= ((uint64_t)zfid->zf_gen[i]) << (8 * i);
|
|
} else {
|
|
ZFS_EXIT(zsb);
|
|
return (SET_ERROR(EINVAL));
|
|
}
|
|
|
|
/* A zero fid_gen means we are in the .zfs control directories */
|
|
if (fid_gen == 0 &&
|
|
(object == ZFSCTL_INO_ROOT || object == ZFSCTL_INO_SNAPDIR)) {
|
|
*ipp = zsb->z_ctldir;
|
|
ASSERT(*ipp != NULL);
|
|
if (object == ZFSCTL_INO_SNAPDIR) {
|
|
VERIFY(zfsctl_root_lookup(*ipp, "snapshot", ipp,
|
|
0, kcred, NULL, NULL) == 0);
|
|
} else {
|
|
igrab(*ipp);
|
|
}
|
|
ZFS_EXIT(zsb);
|
|
return (0);
|
|
}
|
|
|
|
gen_mask = -1ULL >> (64 - 8 * i);
|
|
|
|
dprintf("getting %llu [%llu mask %llx]\n", object, fid_gen, gen_mask);
|
|
if ((err = zfs_zget(zsb, object, &zp))) {
|
|
ZFS_EXIT(zsb);
|
|
return (err);
|
|
}
|
|
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(zsb), &zp_gen,
|
|
sizeof (uint64_t));
|
|
zp_gen = zp_gen & gen_mask;
|
|
if (zp_gen == 0)
|
|
zp_gen = 1;
|
|
if ((fid_gen == 0) && (zsb->z_root == object))
|
|
fid_gen = zp_gen;
|
|
if (zp->z_unlinked || zp_gen != fid_gen) {
|
|
dprintf("znode gen (%llu) != fid gen (%llu)\n", zp_gen,
|
|
fid_gen);
|
|
iput(ZTOI(zp));
|
|
ZFS_EXIT(zsb);
|
|
return (SET_ERROR(EINVAL));
|
|
}
|
|
|
|
*ipp = ZTOI(zp);
|
|
if (*ipp)
|
|
zfs_inode_update(ITOZ(*ipp));
|
|
|
|
ZFS_EXIT(zsb);
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_vget);
|
|
|
|
/*
|
|
* Block out VFS ops and close zfs_sb_t
|
|
*
|
|
* Note, if successful, then we return with the 'z_teardown_lock' and
|
|
* 'z_teardown_inactive_lock' write held. We leave ownership of the underlying
|
|
* dataset and objset intact so that they can be atomically handed off during
|
|
* a subsequent rollback or recv operation and the resume thereafter.
|
|
*/
|
|
int
|
|
zfs_suspend_fs(zfs_sb_t *zsb)
|
|
{
|
|
int error;
|
|
|
|
if ((error = zfs_sb_teardown(zsb, B_FALSE)) != 0)
|
|
return (error);
|
|
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_suspend_fs);
|
|
|
|
/*
|
|
* Reopen zfs_sb_t and release VFS ops.
|
|
*/
|
|
int
|
|
zfs_resume_fs(zfs_sb_t *zsb, const char *osname)
|
|
{
|
|
int err, err2;
|
|
znode_t *zp;
|
|
uint64_t sa_obj = 0;
|
|
|
|
ASSERT(RRM_WRITE_HELD(&zsb->z_teardown_lock));
|
|
ASSERT(RW_WRITE_HELD(&zsb->z_teardown_inactive_lock));
|
|
|
|
/*
|
|
* We already own this, so just hold and rele it to update the
|
|
* objset_t, as the one we had before may have been evicted.
|
|
*/
|
|
VERIFY0(dmu_objset_hold(osname, zsb, &zsb->z_os));
|
|
VERIFY3P(zsb->z_os->os_dsl_dataset->ds_owner, ==, zsb);
|
|
VERIFY(dsl_dataset_long_held(zsb->z_os->os_dsl_dataset));
|
|
dmu_objset_rele(zsb->z_os, zsb);
|
|
|
|
/*
|
|
* Make sure version hasn't changed
|
|
*/
|
|
|
|
err = zfs_get_zplprop(zsb->z_os, ZFS_PROP_VERSION,
|
|
&zsb->z_version);
|
|
|
|
if (err)
|
|
goto bail;
|
|
|
|
err = zap_lookup(zsb->z_os, MASTER_NODE_OBJ,
|
|
ZFS_SA_ATTRS, 8, 1, &sa_obj);
|
|
|
|
if (err && zsb->z_version >= ZPL_VERSION_SA)
|
|
goto bail;
|
|
|
|
if ((err = sa_setup(zsb->z_os, sa_obj,
|
|
zfs_attr_table, ZPL_END, &zsb->z_attr_table)) != 0)
|
|
goto bail;
|
|
|
|
if (zsb->z_version >= ZPL_VERSION_SA)
|
|
sa_register_update_callback(zsb->z_os,
|
|
zfs_sa_upgrade);
|
|
|
|
VERIFY(zfs_sb_setup(zsb, B_FALSE) == 0);
|
|
|
|
zfs_set_fuid_feature(zsb);
|
|
zsb->z_rollback_time = jiffies;
|
|
|
|
/*
|
|
* Attempt to re-establish all the active inodes with their
|
|
* dbufs. If a zfs_rezget() fails, then we unhash the inode
|
|
* and mark it stale. This prevents a collision if a new
|
|
* inode/object is created which must use the same inode
|
|
* number. The stale inode will be be released when the
|
|
* VFS prunes the dentry holding the remaining references
|
|
* on the stale inode.
|
|
*/
|
|
mutex_enter(&zsb->z_znodes_lock);
|
|
for (zp = list_head(&zsb->z_all_znodes); zp;
|
|
zp = list_next(&zsb->z_all_znodes, zp)) {
|
|
err2 = zfs_rezget(zp);
|
|
if (err2) {
|
|
remove_inode_hash(ZTOI(zp));
|
|
zp->z_is_stale = B_TRUE;
|
|
}
|
|
}
|
|
mutex_exit(&zsb->z_znodes_lock);
|
|
|
|
bail:
|
|
/* release the VFS ops */
|
|
rw_exit(&zsb->z_teardown_inactive_lock);
|
|
rrm_exit(&zsb->z_teardown_lock, FTAG);
|
|
|
|
if (err) {
|
|
/*
|
|
* Since we couldn't setup the sa framework, try to force
|
|
* unmount this file system.
|
|
*/
|
|
if (zsb->z_os)
|
|
(void) zfs_umount(zsb->z_sb);
|
|
}
|
|
return (err);
|
|
}
|
|
EXPORT_SYMBOL(zfs_resume_fs);
|
|
|
|
int
|
|
zfs_set_version(zfs_sb_t *zsb, uint64_t newvers)
|
|
{
|
|
int error;
|
|
objset_t *os = zsb->z_os;
|
|
dmu_tx_t *tx;
|
|
|
|
if (newvers < ZPL_VERSION_INITIAL || newvers > ZPL_VERSION)
|
|
return (SET_ERROR(EINVAL));
|
|
|
|
if (newvers < zsb->z_version)
|
|
return (SET_ERROR(EINVAL));
|
|
|
|
if (zfs_spa_version_map(newvers) >
|
|
spa_version(dmu_objset_spa(zsb->z_os)))
|
|
return (SET_ERROR(ENOTSUP));
|
|
|
|
tx = dmu_tx_create(os);
|
|
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_FALSE, ZPL_VERSION_STR);
|
|
if (newvers >= ZPL_VERSION_SA && !zsb->z_use_sa) {
|
|
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_TRUE,
|
|
ZFS_SA_ATTRS);
|
|
dmu_tx_hold_zap(tx, DMU_NEW_OBJECT, FALSE, NULL);
|
|
}
|
|
error = dmu_tx_assign(tx, TXG_WAIT);
|
|
if (error) {
|
|
dmu_tx_abort(tx);
|
|
return (error);
|
|
}
|
|
|
|
error = zap_update(os, MASTER_NODE_OBJ, ZPL_VERSION_STR,
|
|
8, 1, &newvers, tx);
|
|
|
|
if (error) {
|
|
dmu_tx_commit(tx);
|
|
return (error);
|
|
}
|
|
|
|
if (newvers >= ZPL_VERSION_SA && !zsb->z_use_sa) {
|
|
uint64_t sa_obj;
|
|
|
|
ASSERT3U(spa_version(dmu_objset_spa(zsb->z_os)), >=,
|
|
SPA_VERSION_SA);
|
|
sa_obj = zap_create(os, DMU_OT_SA_MASTER_NODE,
|
|
DMU_OT_NONE, 0, tx);
|
|
|
|
error = zap_add(os, MASTER_NODE_OBJ,
|
|
ZFS_SA_ATTRS, 8, 1, &sa_obj, tx);
|
|
ASSERT0(error);
|
|
|
|
VERIFY(0 == sa_set_sa_object(os, sa_obj));
|
|
sa_register_update_callback(os, zfs_sa_upgrade);
|
|
}
|
|
|
|
spa_history_log_internal_ds(dmu_objset_ds(os), "upgrade", tx,
|
|
"from %llu to %llu", zsb->z_version, newvers);
|
|
|
|
dmu_tx_commit(tx);
|
|
|
|
zsb->z_version = newvers;
|
|
|
|
zfs_set_fuid_feature(zsb);
|
|
|
|
return (0);
|
|
}
|
|
EXPORT_SYMBOL(zfs_set_version);
|
|
|
|
/*
|
|
* Read a property stored within the master node.
|
|
*/
|
|
int
|
|
zfs_get_zplprop(objset_t *os, zfs_prop_t prop, uint64_t *value)
|
|
{
|
|
const char *pname;
|
|
int error = SET_ERROR(ENOENT);
|
|
|
|
/*
|
|
* Look up the file system's value for the property. For the
|
|
* version property, we look up a slightly different string.
|
|
*/
|
|
if (prop == ZFS_PROP_VERSION)
|
|
pname = ZPL_VERSION_STR;
|
|
else
|
|
pname = zfs_prop_to_name(prop);
|
|
|
|
if (os != NULL)
|
|
error = zap_lookup(os, MASTER_NODE_OBJ, pname, 8, 1, value);
|
|
|
|
if (error == ENOENT) {
|
|
/* No value set, use the default value */
|
|
switch (prop) {
|
|
case ZFS_PROP_VERSION:
|
|
*value = ZPL_VERSION;
|
|
break;
|
|
case ZFS_PROP_NORMALIZE:
|
|
case ZFS_PROP_UTF8ONLY:
|
|
*value = 0;
|
|
break;
|
|
case ZFS_PROP_CASE:
|
|
*value = ZFS_CASE_SENSITIVE;
|
|
break;
|
|
case ZFS_PROP_ACLTYPE:
|
|
*value = ZFS_ACLTYPE_OFF;
|
|
break;
|
|
default:
|
|
return (error);
|
|
}
|
|
error = 0;
|
|
}
|
|
return (error);
|
|
}
|
|
EXPORT_SYMBOL(zfs_get_zplprop);
|
|
|
|
void
|
|
zfs_init(void)
|
|
{
|
|
zfsctl_init();
|
|
zfs_znode_init();
|
|
dmu_objset_register_type(DMU_OST_ZFS, zfs_space_delta_cb);
|
|
register_filesystem(&zpl_fs_type);
|
|
}
|
|
|
|
void
|
|
zfs_fini(void)
|
|
{
|
|
taskq_wait_outstanding(system_taskq, 0);
|
|
unregister_filesystem(&zpl_fs_type);
|
|
zfs_znode_fini();
|
|
zfsctl_fini();
|
|
}
|