mirror_zfs/config/kernel.m4
Brian Behlendorf d441e85dd7
Add support for autoexpand property
While the autoexpand property may seem like a small feature it
depends on a significant amount of system infrastructure.  Enough
of that infrastructure is now in place that with a few modifications
for Linux it can be supported.

Auto-expand works as follows; when a block device is modified
(re-sized, closed after being open r/w, etc) a change uevent is
generated for udev.  The ZED, which is monitoring udev events,
passes the change event along to zfs_deliver_dle() if the disk
or partition contains a zfs_member as identified by blkid.

From here the device is matched against all imported pool vdevs
using the vdev_guid which was read from the label by blkid.  If
a match is found the ZED reopens the pool vdev.  This re-opening
is important because it allows the vdev to be briefly closed so
the disk partition table can be re-read.  Otherwise, it wouldn't
be possible to report the maximum possible expansion size.

Finally, if the property autoexpand=on a vdev expansion will be
attempted.  After performing some sanity checks on the disk to
verify that it is safe to expand,  the primary partition (-part1)
will be expanded and the partition table updated.  The partition
is then re-opened (again) to detect the updated size which allows
the new capacity to be used.

In order to make all of the above possible the following changes
were required:

* Updated the zpool_expand_001_pos and zpool_expand_003_pos tests.
  These tests now create a pool which is layered on a loopback,
  scsi_debug, and file vdev.  This allows for testing of non-
  partitioned block device (loopback), a partition block device
  (scsi_debug), and a file which does not receive udev change
  events.  This provided for better test coverage, and by removing
  the layering on ZFS volumes there issues surrounding layering
  one pool on another are avoided.

* zpool_find_vdev_by_physpath() updated to accept a vdev guid.
  This allows for matching by guid rather than path which is a
  more reliable way for the ZED to reference a vdev.

* Fixed zfs_zevent_wait() signal handling which could result
  in the ZED spinning when a signal was not handled.

* Removed vdev_disk_rrpart() functionality which can be abandoned
  in favor of kernel provided blkdev_reread_part() function.

* Added a rwlock which is held as a writer while a disk is being
  reopened.  This is important to prevent errors from occurring
  for any configuration related IOs which bypass the SCL_ZIO lock.
  The zpool_reopen_007_pos.ksh test case was added to verify IO
  error are never observed when reopening.  This is not expected
  to impact IO performance.

Additional fixes which aren't critical but were discovered and
resolved in the course of developing this functionality.

* Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for
  ZFS volumes.  This is as good as a unique physical path, while the
  volumes are not used in the test cases anymore for other reasons
  this improvement was included.

Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Signed-off-by: Sara Hartse <sara.hartse@delphix.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #120
Closes #2437
Closes #5771
Closes #7366
Closes #7582
Closes #7629
2018-07-23 15:40:15 -07:00

675 lines
18 KiB
Plaintext

dnl #
dnl # Default ZFS kernel configuration
dnl #
AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [
ZFS_AC_KERNEL
ZFS_AC_QAT
ZFS_AC_TEST_MODULE
ZFS_AC_KERNEL_MISC_MINOR
ZFS_AC_KERNEL_OBJTOOL
ZFS_AC_KERNEL_CONFIG
ZFS_AC_KERNEL_CTL_NAME
ZFS_AC_KERNEL_PDE_DATA
ZFS_AC_KERNEL_SET_FS_PWD_WITH_CONST
ZFS_AC_KERNEL_2ARGS_VFS_FSYNC
ZFS_AC_KERNEL_FS_STRUCT_SPINLOCK
ZFS_AC_KERNEL_KUIDGID_T
ZFS_AC_KERNEL_FALLOCATE
ZFS_AC_KERNEL_2ARGS_ZLIB_DEFLATE_WORKSPACESIZE
ZFS_AC_KERNEL_RWSEM_SPINLOCK_IS_RAW
ZFS_AC_KERNEL_RWSEM_ACTIVITY
ZFS_AC_KERNEL_RWSEM_ATOMIC_LONG_COUNT
ZFS_AC_KERNEL_SCHED_RT_HEADER
ZFS_AC_KERNEL_SCHED_SIGNAL_HEADER
ZFS_AC_KERNEL_IO_SCHEDULE_TIMEOUT
ZFS_AC_KERNEL_4ARGS_VFS_GETATTR
ZFS_AC_KERNEL_3ARGS_VFS_GETATTR
ZFS_AC_KERNEL_2ARGS_VFS_GETATTR
ZFS_AC_KERNEL_USLEEP_RANGE
ZFS_AC_KERNEL_KMEM_CACHE_ALLOCFLAGS
ZFS_AC_KERNEL_KMEM_CACHE_CREATE_USERCOPY
ZFS_AC_KERNEL_WAIT_ON_BIT
ZFS_AC_KERNEL_WAIT_QUEUE_ENTRY_T
ZFS_AC_KERNEL_WAIT_QUEUE_HEAD_ENTRY
ZFS_AC_KERNEL_INODE_TIMES
ZFS_AC_KERNEL_INODE_LOCK
ZFS_AC_KERNEL_GROUP_INFO_GID
ZFS_AC_KERNEL_WRITE
ZFS_AC_KERNEL_READ
ZFS_AC_KERNEL_TIMER_FUNCTION_TIMER_LIST
ZFS_AC_KERNEL_DECLARE_EVENT_CLASS
ZFS_AC_KERNEL_CURRENT_BIO_TAIL
ZFS_AC_KERNEL_SUPER_USER_NS
ZFS_AC_KERNEL_SUBMIT_BIO
ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS_CHECK_EVENTS
ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS_RELEASE_VOID
ZFS_AC_KERNEL_TYPE_FMODE_T
ZFS_AC_KERNEL_BLKDEV_GET_BY_PATH
ZFS_AC_KERNEL_BLKDEV_REREAD_PART
ZFS_AC_KERNEL_OPEN_BDEV_EXCLUSIVE
ZFS_AC_KERNEL_LOOKUP_BDEV
ZFS_AC_KERNEL_INVALIDATE_BDEV_ARGS
ZFS_AC_KERNEL_BDEV_LOGICAL_BLOCK_SIZE
ZFS_AC_KERNEL_BDEV_PHYSICAL_BLOCK_SIZE
ZFS_AC_KERNEL_BIO_BVEC_ITER
ZFS_AC_KERNEL_BIO_FAILFAST_DTD
ZFS_AC_KERNEL_BIO_SET_DEV
ZFS_AC_KERNEL_REQ_FAILFAST_MASK
ZFS_AC_KERNEL_REQ_OP_DISCARD
ZFS_AC_KERNEL_REQ_OP_SECURE_ERASE
ZFS_AC_KERNEL_REQ_OP_FLUSH
ZFS_AC_KERNEL_BIO_BI_OPF
ZFS_AC_KERNEL_BIO_END_IO_T_ARGS
ZFS_AC_KERNEL_BIO_BI_STATUS
ZFS_AC_KERNEL_BIO_RW_BARRIER
ZFS_AC_KERNEL_BIO_RW_DISCARD
ZFS_AC_KERNEL_BLK_QUEUE_BDI
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_CLEAR
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_SET
ZFS_AC_KERNEL_BLK_QUEUE_FLUSH
ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS
ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS
ZFS_AC_KERNEL_BLK_QUEUE_HAVE_BIO_RW_UNPLUG
ZFS_AC_KERNEL_BLK_QUEUE_HAVE_BLK_PLUG
ZFS_AC_KERNEL_GET_DISK_AND_MODULE
ZFS_AC_KERNEL_GET_DISK_RO
ZFS_AC_KERNEL_HAVE_BIO_SET_OP_ATTRS
ZFS_AC_KERNEL_GENERIC_READLINK_GLOBAL
ZFS_AC_KERNEL_DISCARD_GRANULARITY
ZFS_AC_KERNEL_CONST_XATTR_HANDLER
ZFS_AC_KERNEL_XATTR_HANDLER_NAME
ZFS_AC_KERNEL_XATTR_HANDLER_GET
ZFS_AC_KERNEL_XATTR_HANDLER_SET
ZFS_AC_KERNEL_XATTR_HANDLER_LIST
ZFS_AC_KERNEL_INODE_OWNER_OR_CAPABLE
ZFS_AC_KERNEL_POSIX_ACL_FROM_XATTR_USERNS
ZFS_AC_KERNEL_POSIX_ACL_RELEASE
ZFS_AC_KERNEL_SET_CACHED_ACL_USABLE
ZFS_AC_KERNEL_POSIX_ACL_CHMOD
ZFS_AC_KERNEL_POSIX_ACL_EQUIV_MODE_WANTS_UMODE_T
ZFS_AC_KERNEL_POSIX_ACL_VALID_WITH_NS
ZFS_AC_KERNEL_INODE_OPERATIONS_PERMISSION
ZFS_AC_KERNEL_INODE_OPERATIONS_PERMISSION_WITH_NAMEIDATA
ZFS_AC_KERNEL_INODE_OPERATIONS_CHECK_ACL
ZFS_AC_KERNEL_INODE_OPERATIONS_CHECK_ACL_WITH_FLAGS
ZFS_AC_KERNEL_INODE_OPERATIONS_GET_ACL
ZFS_AC_KERNEL_INODE_OPERATIONS_SET_ACL
ZFS_AC_KERNEL_INODE_OPERATIONS_GETATTR
ZFS_AC_KERNEL_INODE_SET_FLAGS
ZFS_AC_KERNEL_INODE_SET_IVERSION
ZFS_AC_KERNEL_GET_ACL_HANDLE_CACHE
ZFS_AC_KERNEL_SHOW_OPTIONS
ZFS_AC_KERNEL_FILE_INODE
ZFS_AC_KERNEL_FILE_DENTRY
ZFS_AC_KERNEL_FSYNC
ZFS_AC_KERNEL_EVICT_INODE
ZFS_AC_KERNEL_DIRTY_INODE_WITH_FLAGS
ZFS_AC_KERNEL_NR_CACHED_OBJECTS
ZFS_AC_KERNEL_FREE_CACHED_OBJECTS
ZFS_AC_KERNEL_FALLOCATE
ZFS_AC_KERNEL_AIO_FSYNC
ZFS_AC_KERNEL_MKDIR_UMODE_T
ZFS_AC_KERNEL_LOOKUP_NAMEIDATA
ZFS_AC_KERNEL_CREATE_NAMEIDATA
ZFS_AC_KERNEL_GET_LINK
ZFS_AC_KERNEL_PUT_LINK
ZFS_AC_KERNEL_TMPFILE
ZFS_AC_KERNEL_TRUNCATE_RANGE
ZFS_AC_KERNEL_AUTOMOUNT
ZFS_AC_KERNEL_ENCODE_FH_WITH_INODE
ZFS_AC_KERNEL_COMMIT_METADATA
ZFS_AC_KERNEL_CLEAR_INODE
ZFS_AC_KERNEL_SETATTR_PREPARE
ZFS_AC_KERNEL_INSERT_INODE_LOCKED
ZFS_AC_KERNEL_D_MAKE_ROOT
ZFS_AC_KERNEL_D_OBTAIN_ALIAS
ZFS_AC_KERNEL_D_PRUNE_ALIASES
ZFS_AC_KERNEL_D_SET_D_OP
ZFS_AC_KERNEL_D_REVALIDATE_NAMEIDATA
ZFS_AC_KERNEL_CONST_DENTRY_OPERATIONS
ZFS_AC_KERNEL_TRUNCATE_SETSIZE
ZFS_AC_KERNEL_6ARGS_SECURITY_INODE_INIT_SECURITY
ZFS_AC_KERNEL_CALLBACK_SECURITY_INODE_INIT_SECURITY
ZFS_AC_KERNEL_FST_MOUNT
ZFS_AC_KERNEL_SHRINK
ZFS_AC_KERNEL_SHRINK_CONTROL_HAS_NID
ZFS_AC_KERNEL_SHRINK_CONTROL_STRUCT
ZFS_AC_KERNEL_SHRINKER_CALLBACK
ZFS_AC_KERNEL_S_INSTANCES_LIST_HEAD
ZFS_AC_KERNEL_S_D_OP
ZFS_AC_KERNEL_BDI
ZFS_AC_KERNEL_SET_NLINK
ZFS_AC_KERNEL_ELEVATOR_CHANGE
ZFS_AC_KERNEL_5ARG_SGET
ZFS_AC_KERNEL_LSEEK_EXECUTE
ZFS_AC_KERNEL_VFS_ITERATE
ZFS_AC_KERNEL_VFS_RW_ITERATE
ZFS_AC_KERNEL_GENERIC_WRITE_CHECKS
ZFS_AC_KERNEL_KMAP_ATOMIC_ARGS
ZFS_AC_KERNEL_FOLLOW_DOWN_ONE
ZFS_AC_KERNEL_MAKE_REQUEST_FN
ZFS_AC_KERNEL_GENERIC_IO_ACCT_3ARG
ZFS_AC_KERNEL_GENERIC_IO_ACCT_4ARG
ZFS_AC_KERNEL_FPU
ZFS_AC_KERNEL_KUID_HELPERS
ZFS_AC_KERNEL_MODULE_PARAM_CALL_CONST
ZFS_AC_KERNEL_RENAME_WANTS_FLAGS
ZFS_AC_KERNEL_HAVE_GENERIC_SETXATTR
ZFS_AC_KERNEL_CURRENT_TIME
ZFS_AC_KERNEL_GLOBAL_PAGE_STATE
ZFS_AC_KERNEL_ACL_HAS_REFCOUNT
ZFS_AC_KERNEL_USERNS_CAPABILITIES
AS_IF([test "$LINUX_OBJ" != "$LINUX"], [
KERNEL_MAKE="$KERNEL_MAKE O=$LINUX_OBJ"
])
AC_SUBST(KERNEL_MAKE)
])
dnl #
dnl # Detect name used for Module.symvers file in kernel
dnl #
AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [
modpost=$LINUX/scripts/Makefile.modpost
AC_MSG_CHECKING([kernel file name for module symbols])
AS_IF([test "x$enable_linux_builtin" != xyes -a -f "$modpost"], [
AS_IF([grep -q Modules.symvers $modpost], [
LINUX_SYMBOLS=Modules.symvers
], [
LINUX_SYMBOLS=Module.symvers
])
AS_IF([test ! -f "$LINUX_OBJ/$LINUX_SYMBOLS"], [
AC_MSG_ERROR([
*** Please make sure the kernel devel package for your distribution
*** is installed. If you are building with a custom kernel, make sure the
*** kernel is configured, built, and the '--with-linux=PATH' configure
*** option refers to the location of the kernel source.])
])
], [
LINUX_SYMBOLS=NONE
])
AC_MSG_RESULT($LINUX_SYMBOLS)
AC_SUBST(LINUX_SYMBOLS)
])
dnl #
dnl # Detect the kernel to be built against
dnl #
AC_DEFUN([ZFS_AC_KERNEL], [
AC_ARG_WITH([linux],
AS_HELP_STRING([--with-linux=PATH],
[Path to kernel source]),
[kernelsrc="$withval"])
AC_ARG_WITH(linux-obj,
AS_HELP_STRING([--with-linux-obj=PATH],
[Path to kernel build objects]),
[kernelbuild="$withval"])
AC_MSG_CHECKING([kernel source directory])
AS_IF([test -z "$kernelsrc"], [
AS_IF([test -e "/lib/modules/$(uname -r)/source"], [
headersdir="/lib/modules/$(uname -r)/source"
sourcelink=$(readlink -f "$headersdir")
], [test -e "/lib/modules/$(uname -r)/build"], [
headersdir="/lib/modules/$(uname -r)/build"
sourcelink=$(readlink -f "$headersdir")
], [
sourcelink=$(ls -1d /usr/src/kernels/* \
/usr/src/linux-* \
2>/dev/null | grep -v obj | tail -1)
])
AS_IF([test -n "$sourcelink" && test -e ${sourcelink}], [
kernelsrc=`readlink -f ${sourcelink}`
], [
kernelsrc="[Not found]"
])
], [
AS_IF([test "$kernelsrc" = "NONE"], [
kernsrcver=NONE
])
withlinux=yes
])
AC_MSG_RESULT([$kernelsrc])
AS_IF([test ! -d "$kernelsrc"], [
AC_MSG_ERROR([
*** Please make sure the kernel devel package for your distribution
*** is installed and then try again. If that fails, you can specify the
*** location of the kernel source with the '--with-linux=PATH' option.])
])
AC_MSG_CHECKING([kernel build directory])
AS_IF([test -z "$kernelbuild"], [
AS_IF([test x$withlinux != xyes -a -e "/lib/modules/$(uname -r)/build"], [
kernelbuild=`readlink -f /lib/modules/$(uname -r)/build`
], [test -d ${kernelsrc}-obj/${target_cpu}/${target_cpu}], [
kernelbuild=${kernelsrc}-obj/${target_cpu}/${target_cpu}
], [test -d ${kernelsrc}-obj/${target_cpu}/default], [
kernelbuild=${kernelsrc}-obj/${target_cpu}/default
], [test -d `dirname ${kernelsrc}`/build-${target_cpu}], [
kernelbuild=`dirname ${kernelsrc}`/build-${target_cpu}
], [
kernelbuild=${kernelsrc}
])
])
AC_MSG_RESULT([$kernelbuild])
AC_MSG_CHECKING([kernel source version])
utsrelease1=$kernelbuild/include/linux/version.h
utsrelease2=$kernelbuild/include/linux/utsrelease.h
utsrelease3=$kernelbuild/include/generated/utsrelease.h
AS_IF([test -r $utsrelease1 && fgrep -q UTS_RELEASE $utsrelease1], [
utsrelease=linux/version.h
], [test -r $utsrelease2 && fgrep -q UTS_RELEASE $utsrelease2], [
utsrelease=linux/utsrelease.h
], [test -r $utsrelease3 && fgrep -q UTS_RELEASE $utsrelease3], [
utsrelease=generated/utsrelease.h
])
AS_IF([test "$utsrelease"], [
kernsrcver=`(echo "#include <$utsrelease>";
echo "kernsrcver=UTS_RELEASE") |
cpp -I $kernelbuild/include |
grep "^kernsrcver=" | cut -d \" -f 2`
AS_IF([test -z "$kernsrcver"], [
AC_MSG_RESULT([Not found])
AC_MSG_ERROR([*** Cannot determine kernel version.])
])
], [
AC_MSG_RESULT([Not found])
if test "x$enable_linux_builtin" != xyes; then
AC_MSG_ERROR([*** Cannot find UTS_RELEASE definition.])
else
AC_MSG_ERROR([
*** Cannot find UTS_RELEASE definition.
*** Please run 'make prepare' inside the kernel source tree.])
fi
])
AC_MSG_RESULT([$kernsrcver])
LINUX=${kernelsrc}
LINUX_OBJ=${kernelbuild}
LINUX_VERSION=${kernsrcver}
AC_SUBST(LINUX)
AC_SUBST(LINUX_OBJ)
AC_SUBST(LINUX_VERSION)
ZFS_AC_MODULE_SYMVERS
])
dnl #
dnl # Detect the QAT module to be built against
dnl # QAT provides hardware acceleration for data compression:
dnl # https://01.org/intel-quickassist-technology
dnl # * Download and install QAT driver from the above link
dnl # * Start QAT driver in your system:
dnl # service qat_service start
dnl # * Enable QAT in ZFS, e.g.:
dnl # ./configure --with-qat=<qat-driver-path>/QAT1.6
dnl # make
dnl # * Set GZIP compression in ZFS dataset:
dnl # zfs set compression = gzip <dataset>
dnl # Then the data written to this ZFS pool is compressed
dnl # by QAT accelerator automatically, and de-compressed by
dnl # QAT when read from the pool.
dnl # * Get QAT hardware statistics by:
dnl # cat /proc/icp_dh895xcc_dev/qat
dnl # * To disable QAT:
dnl # insmod zfs.ko zfs_qat_disable=1
dnl #
AC_DEFUN([ZFS_AC_QAT], [
AC_ARG_WITH([qat],
AS_HELP_STRING([--with-qat=PATH],
[Path to qat source]),
AS_IF([test "$withval" = "yes"],
AC_MSG_ERROR([--with-qat=PATH requires a PATH]),
[qatsrc="$withval"]))
AC_ARG_WITH([qat-obj],
AS_HELP_STRING([--with-qat-obj=PATH],
[Path to qat build objects]),
[qatbuild="$withval"])
AS_IF([test ! -z "${qatsrc}"], [
AC_MSG_CHECKING([qat source directory])
AC_MSG_RESULT([$qatsrc])
QAT_SRC="${qatsrc}/quickassist"
AS_IF([ test ! -e "$QAT_SRC/include/cpa.h"], [
AC_MSG_ERROR([
*** Please make sure the qat driver package is installed
*** and specify the location of the qat source with the
*** '--with-qat=PATH' option then try again. Failed to
*** find cpa.h in:
${QAT_SRC}/include])
])
])
AS_IF([test ! -z "${qatsrc}"], [
AC_MSG_CHECKING([qat build directory])
AS_IF([test -z "$qatbuild"], [
qatbuild="${qatsrc}/build"
])
AC_MSG_RESULT([$qatbuild])
QAT_OBJ=${qatbuild}
AS_IF([ ! test -e "$QAT_OBJ/icp_qa_al.ko" && ! test -e "$QAT_OBJ/qat_api.ko"], [
AC_MSG_ERROR([
*** Please make sure the qat driver is installed then try again.
*** Failed to find icp_qa_al.ko or qat_api.ko in:
$QAT_OBJ])
])
AC_SUBST(QAT_SRC)
AC_SUBST(QAT_OBJ)
AC_DEFINE(HAVE_QAT, 1,
[qat is enabled and existed])
])
dnl #
dnl # Detect the name used for the QAT Module.symvers file.
dnl #
AS_IF([test ! -z "${qatsrc}"], [
AC_MSG_CHECKING([qat file for module symbols])
QAT_SYMBOLS=$QAT_SRC/lookaside/access_layer/src/Module.symvers
AS_IF([test -r $QAT_SYMBOLS], [
AC_MSG_RESULT([$QAT_SYMBOLS])
AC_SUBST(QAT_SYMBOLS)
],[
AC_MSG_ERROR([
*** Please make sure the qat driver is installed then try again.
*** Failed to find Module.symvers in:
$QAT_SYMBOLS])
])
])
])
])
dnl #
dnl # Basic toolchain sanity check.
dnl #
AC_DEFUN([ZFS_AC_TEST_MODULE], [
AC_MSG_CHECKING([whether modules can be built])
ZFS_LINUX_TRY_COMPILE([],[],[
AC_MSG_RESULT([yes])
],[
AC_MSG_RESULT([no])
if test "x$enable_linux_builtin" != xyes; then
AC_MSG_ERROR([*** Unable to build an empty module.])
else
AC_MSG_ERROR([
*** Unable to build an empty module.
*** Please run 'make scripts' inside the kernel source tree.])
fi
])
])
dnl #
dnl # Certain kernel build options are not supported. These must be
dnl # detected at configure time and cause a build failure. Otherwise
dnl # modules may be successfully built that behave incorrectly.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_CONFIG], [
AS_IF([test "x$cross_compiling" != xyes], [
AC_RUN_IFELSE([
AC_LANG_PROGRAM([
#include "$LINUX/include/linux/license.h"
], [
return !license_is_gpl_compatible("$ZFS_META_LICENSE");
])
], [
AC_DEFINE([ZFS_IS_GPL_COMPATIBLE], [1],
[Define to 1 if GPL-only symbols can be used])
], [
])
])
ZFS_AC_KERNEL_CONFIG_THREAD_SIZE
ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC
ZFS_AC_KERNEL_CONFIG_TRIM_UNUSED_KSYMS
ZFS_AC_KERNEL_CONFIG_ZLIB_INFLATE
ZFS_AC_KERNEL_CONFIG_ZLIB_DEFLATE
])
dnl #
dnl # Check configured THREAD_SIZE
dnl #
dnl # The stack size will vary by architecture, but as of Linux 3.15 on x86_64
dnl # the default thread stack size was increased to 16K from 8K. Therefore,
dnl # on newer kernels and some architectures stack usage optimizations can be
dnl # conditionally applied to improve performance without negatively impacting
dnl # stability.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_THREAD_SIZE], [
AC_MSG_CHECKING([whether kernel was built with 16K or larger stacks])
ZFS_LINUX_TRY_COMPILE([
#include <linux/module.h>
],[
#if (THREAD_SIZE < 16384)
#error "THREAD_SIZE is less than 16K"
#endif
],[
AC_MSG_RESULT([yes])
AC_DEFINE(HAVE_LARGE_STACKS, 1, [kernel has large stacks])
],[
AC_MSG_RESULT([no])
])
])
dnl #
dnl # Check CONFIG_DEBUG_LOCK_ALLOC
dnl #
dnl # This is typically only set for debug kernels because it comes with
dnl # a performance penalty. However, when it is set it maps the non-GPL
dnl # symbol mutex_lock() to the GPL-only mutex_lock_nested() symbol.
dnl # This will cause a failure at link time which we'd rather know about
dnl # at compile time.
dnl #
dnl # Since we plan to pursue making mutex_lock_nested() a non-GPL symbol
dnl # with the upstream community we add a check to detect this case.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC], [
ZFS_LINUX_CONFIG([DEBUG_LOCK_ALLOC], [
AC_MSG_CHECKING([whether mutex_lock() is GPL-only])
tmp_flags="$EXTRA_KCFLAGS"
ZFS_LINUX_TRY_COMPILE([
#include <linux/module.h>
#include <linux/mutex.h>
MODULE_LICENSE("$ZFS_META_LICENSE");
],[
struct mutex lock;
mutex_init(&lock);
mutex_lock(&lock);
mutex_unlock(&lock);
],[
AC_MSG_RESULT(no)
],[
AC_MSG_RESULT(yes)
AC_MSG_ERROR([
*** Kernel built with CONFIG_DEBUG_LOCK_ALLOC which is incompatible
*** with the CDDL license and will prevent the module linking stage
*** from succeeding. You must rebuild your kernel without this
*** option enabled.])
])
EXTRA_KCFLAGS="$tmp_flags"
], [])
])
dnl #
dnl # Check CONFIG_TRIM_UNUSED_KSYMS
dnl #
dnl # Verify the kernel has CONFIG_TRIM_UNUSED_KSYMS disabled.
dnl #
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_TRIM_UNUSED_KSYMS], [
AC_MSG_CHECKING([whether CONFIG_TRIM_UNUSED_KSYM is disabled])
ZFS_LINUX_TRY_COMPILE([
#if defined(CONFIG_TRIM_UNUSED_KSYMS)
#error CONFIG_TRIM_UNUSED_KSYMS not defined
#endif
],[ ],[
AC_MSG_RESULT([yes])
],[
AC_MSG_RESULT([no])
AC_MSG_ERROR([
*** This kernel has unused symbols trimming enabled, please disable.
*** Rebuild the kernel with CONFIG_TRIM_UNUSED_KSYMS=n set.])
])
])
dnl #
dnl # ZFS_LINUX_CONFTEST_H
dnl #
AC_DEFUN([ZFS_LINUX_CONFTEST_H], [
cat - <<_ACEOF >conftest.h
$1
_ACEOF
])
dnl #
dnl # ZFS_LINUX_CONFTEST_C
dnl #
AC_DEFUN([ZFS_LINUX_CONFTEST_C], [
cat confdefs.h - <<_ACEOF >conftest.c
$1
_ACEOF
])
dnl #
dnl # ZFS_LANG_PROGRAM(C)([PROLOGUE], [BODY])
dnl #
m4_define([ZFS_LANG_PROGRAM], [
$1
int
main (void)
{
dnl Do *not* indent the following line: there may be CPP directives.
dnl Don't move the `;' right after for the same reason.
$2
;
return 0;
}
])
dnl #
dnl # ZFS_LINUX_COMPILE_IFELSE / like AC_COMPILE_IFELSE
dnl #
AC_DEFUN([ZFS_LINUX_COMPILE_IFELSE], [
m4_ifvaln([$1], [ZFS_LINUX_CONFTEST_C([$1])])
m4_ifvaln([$6], [ZFS_LINUX_CONFTEST_H([$6])], [ZFS_LINUX_CONFTEST_H([])])
rm -Rf build && mkdir -p build && touch build/conftest.mod.c
echo "obj-m := conftest.o" >build/Makefile
modpost_flag=''
test "x$enable_linux_builtin" = xyes && modpost_flag='modpost=true' # fake modpost stage
AS_IF(
[AC_TRY_COMMAND(cp conftest.c conftest.h build && make [$2] -C $LINUX_OBJ EXTRA_CFLAGS="-Werror $FRAME_LARGER_THAN $EXTRA_KCFLAGS" $ARCH_UM M=$PWD/build $modpost_flag) >/dev/null && AC_TRY_COMMAND([$3])],
[$4],
[_AC_MSG_LOG_CONFTEST m4_ifvaln([$5],[$5])]
)
rm -Rf build
])
dnl #
dnl # ZFS_LINUX_TRY_COMPILE like AC_TRY_COMPILE
dnl #
AC_DEFUN([ZFS_LINUX_TRY_COMPILE],
[ZFS_LINUX_COMPILE_IFELSE(
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
[modules],
[test -s build/conftest.o],
[$3], [$4])
])
dnl #
dnl # ZFS_LINUX_CONFIG
dnl #
AC_DEFUN([ZFS_LINUX_CONFIG],
[AC_MSG_CHECKING([whether kernel was built with CONFIG_$1])
ZFS_LINUX_TRY_COMPILE([
#include <linux/module.h>
],[
#ifndef CONFIG_$1
#error CONFIG_$1 not #defined
#endif
],[
AC_MSG_RESULT([yes])
$2
],[
AC_MSG_RESULT([no])
$3
])
])
dnl #
dnl # ZFS_CHECK_SYMBOL_EXPORT
dnl # check symbol exported or not
dnl #
AC_DEFUN([ZFS_CHECK_SYMBOL_EXPORT], [
grep -q -E '[[[:space:]]]$1[[[:space:]]]' \
$LINUX_OBJ/$LINUX_SYMBOLS 2>/dev/null
rc=$?
if test $rc -ne 0; then
export=0
for file in $2; do
grep -q -E "EXPORT_SYMBOL.*($1)" \
"$LINUX/$file" 2>/dev/null
rc=$?
if test $rc -eq 0; then
export=1
break;
fi
done
if test $export -eq 0; then :
$4
else :
$3
fi
else :
$3
fi
])
dnl #
dnl # ZFS_LINUX_TRY_COMPILE_SYMBOL
dnl # like ZFS_LINUX_TRY_COMPILE, except ZFS_CHECK_SYMBOL_EXPORT
dnl # is called if not compiling for builtin
dnl #
AC_DEFUN([ZFS_LINUX_TRY_COMPILE_SYMBOL], [
ZFS_LINUX_TRY_COMPILE([$1], [$2], [rc=0], [rc=1])
if test $rc -ne 0; then :
$6
else
if test "x$enable_linux_builtin" != xyes; then
ZFS_CHECK_SYMBOL_EXPORT([$3], [$4], [rc=0], [rc=1])
fi
if test $rc -ne 0; then :
$6
else :
$5
fi
fi
])
dnl #
dnl # ZFS_LINUX_TRY_COMPILE_HEADER
dnl # like ZFS_LINUX_TRY_COMPILE, except the contents conftest.h are
dnl # provided via the fifth parameter
dnl #
AC_DEFUN([ZFS_LINUX_TRY_COMPILE_HEADER],
[ZFS_LINUX_COMPILE_IFELSE(
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
[modules],
[test -s build/conftest.o],
[$3], [$4], [$5])
])