c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-27 11:29:36 +03:00
Code Issues Packages Projects Releases Wiki Activity
613d88eda8
mirror_zfs/etc/Makefile.in
Brian Behlendorf 4b787d75c8 Cleanly support debug packages 
Allow a source rpm to be rebuilt with debugging enabled.  This
avoids the need to have to manually modify the spec file.  By
default debugging is still largely disabled.  To enable specific
debugging features use the following options with rpmbuild.

  '--with debug'               - Enables ASSERTs

  # For example:
  $ rpmbuild --rebuild --with debug zfs-modules-0.6.0-rc6.src.rpm

Additionally, ZFS_CONFIG has been added to zfs_config.h for
packages which build against these headers.  This is critical
to ensure both zfs and the dependant package are using the same
prototype and structure definitions.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-27 14:08:17 -08:00

679 lines
21 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = etc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
$(top_srcdir)/config/kernel-bdi.m4 \
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-queue-discard.m4 \
$(top_srcdir)/config/kernel-blk-queue-flush.m4 \
$(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
$(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
$(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
$(top_srcdir)/config/kernel-evict-inode.m4 \
$(top_srcdir)/config/kernel-fallocate.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-fsync.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
$(top_srcdir)/config/kernel-mount-nodev.m4 \
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
$(top_srcdir)/config/kernel-security-inode-init.m4 \
$(top_srcdir)/config/kernel-set-nlink.m4 \
$(top_srcdir)/config/kernel-show-options.m4 \
$(top_srcdir)/config/kernel-shrink.m4 \
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
$(top_srcdir)/config/kernel-xattr-handler.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-selinux.m4 \
$(top_srcdir)/config/user-udev.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/zfs_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
DEBUG_ZFS = @DEBUG_ZFS@
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_MAKEPKG = @HAVE_MAKEPKG@
HAVE_PACMAN = @HAVE_PACMAN@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSELINUX = @LIBSELINUX@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAKEPKG = @MAKEPKG@
MAKEPKG_VERSION = @MAKEPKG_VERSION@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACMAN = @PACMAN@
PACMAN_VERSION = @PACMAN_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
udevdir = @udevdir@
udevruledir = @udevruledir@
SUBDIRS = init.d zfs
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu etc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu etc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink