c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-28 03:49:38 +03:00
Code Issues Packages Projects Releases Wiki Activity
5aea3644d6
mirror_zfs/module/zfs/zil.c
Brian Behlendorf 19ea3d25df Use zio buffers in zil_itx_create() 
The zil_itx_create() function uses the vmem_alloc() allocator for
its buffers because when logging a write that buffer may be as large
as 64K.  This is non-optimal because we may need to allocate many of
of these buffers and this interface has the potential to be slow.
Instead, use zio_data_buf_alloc() which is specifically designed to
be able to efficiently allocate a wide range of buffer sizes.

In addition, do some cleanup and use the zil_itx_destroy() function
to always free an itx structure.  This way we're always sure the
right allocation functions are used.  Notice that in the current
code kmem_free() and vmem_free() were both used.  This happened to
work because these wrappers map to the same internal SPL function.

This was identified as a potential problem when a low-end memory
constrained system began logging the following warnings.  There
was no deadlock here just repeated allocation failures resulting
in increased latency.

Possible memory allocation deadlock: size=65792 lflags=0x42d0
Pid: 20118, comm: kvm Tainted: P           O 3.2.0-0.bpo.4-amd64
Call Trace:
 [<ffffffffa040b834>] ? spl_kmem_alloc_impl+0x115/0x127 [spl]
 [<ffffffffa040b84f>] ? spl_kmem_alloc_debug+0x9/0x36 [spl]
 [<ffffffffa05d8a0b>] ? zil_itx_create+0x2d/0x59 [zfs]
 [<ffffffffa05c71e6>] ? zfs_log_write+0x13a/0x2f0 [zfs]
 [<ffffffffa05d41bc>] ? zfs_write+0x85b/0x9bb [zfs]
 [<ffffffffa05e37ec>] ? zpl_aio_write+0xca/0x110 [zfs]
 [<ffffffff811088e5>] ? do_sync_readv_writev+0xa3/0xde
 [<ffffffff81108f41>] ? do_readv_writev+0xaf/0x125
 [<ffffffff81109055>] ? sys_pwritev+0x55/0x9a
 [<ffffffff813721d2>] ? system_call_fastpath+0x16/0x1b

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #3059
2015-02-02 11:20:41 -08:00

2284 lines
61 KiB
C
Raw Blame History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2014 by Delphix. All rights reserved.
*/
/* Portions Copyright 2010 Robert Milkowski */
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/dmu.h>
#include <sys/zap.h>
#include <sys/arc.h>
#include <sys/stat.h>
#include <sys/resource.h>
#include <sys/zil.h>
#include <sys/zil_impl.h>
#include <sys/dsl_dataset.h>
#include <sys/vdev_impl.h>
#include <sys/dmu_tx.h>
#include <sys/dsl_pool.h>
#include <sys/metaslab.h>
#include <sys/trace_zil.h>
/*
* The zfs intent log (ZIL) saves transaction records of system calls
* that change the file system in memory with enough information
* to be able to replay them. These are stored in memory until
* either the DMU transaction group (txg) commits them to the stable pool
* and they can be discarded, or they are flushed to the stable log
* (also in the pool) due to a fsync, O_DSYNC or other synchronous
* requirement. In the event of a panic or power fail then those log
* records (transactions) are replayed.
*
* There is one ZIL per file system. Its on-disk (pool) format consists
* of 3 parts:
*
* - ZIL header
* - ZIL blocks
* - ZIL records
*
* A log record holds a system call transaction. Log blocks can
* hold many log records and the blocks are chained together.
* Each ZIL block contains a block pointer (blkptr_t) to the next
* ZIL block in the chain. The ZIL header points to the first
* block in the chain. Note there is not a fixed place in the pool
* to hold blocks. They are dynamically allocated and freed as
* needed from the blocks available. Figure X shows the ZIL structure:
*/
/*
* See zil.h for more information about these fields.
*/
zil_stats_t zil_stats = {
{ "zil_commit_count", KSTAT_DATA_UINT64 },
{ "zil_commit_writer_count", KSTAT_DATA_UINT64 },
{ "zil_itx_count", KSTAT_DATA_UINT64 },
{ "zil_itx_indirect_count", KSTAT_DATA_UINT64 },
{ "zil_itx_indirect_bytes", KSTAT_DATA_UINT64 },
{ "zil_itx_copied_count", KSTAT_DATA_UINT64 },
{ "zil_itx_copied_bytes", KSTAT_DATA_UINT64 },
{ "zil_itx_needcopy_count", KSTAT_DATA_UINT64 },
{ "zil_itx_needcopy_bytes", KSTAT_DATA_UINT64 },
{ "zil_itx_metaslab_normal_count", KSTAT_DATA_UINT64 },
{ "zil_itx_metaslab_normal_bytes", KSTAT_DATA_UINT64 },
{ "zil_itx_metaslab_slog_count", KSTAT_DATA_UINT64 },
{ "zil_itx_metaslab_slog_bytes", KSTAT_DATA_UINT64 },
};
static kstat_t *zil_ksp;
/*
* Disable intent logging replay. This global ZIL switch affects all pools.
*/
int zil_replay_disable = 0;
/*
* Tunable parameter for debugging or performance analysis. Setting
* zfs_nocacheflush will cause corruption on power loss if a volatile
* out-of-order write cache is enabled.
*/
int zfs_nocacheflush = 0;
static kmem_cache_t *zil_lwb_cache;
static void zil_async_to_sync(zilog_t *zilog, uint64_t foid);
#define LWB_EMPTY(lwb) ((BP_GET_LSIZE(&lwb->lwb_blk) - \
sizeof (zil_chain_t)) == (lwb->lwb_sz - lwb->lwb_nused))
/*
* ziltest is by and large an ugly hack, but very useful in
* checking replay without tedious work.
* When running ziltest we want to keep all itx's and so maintain
* a single list in the zl_itxg[] that uses a high txg: ZILTEST_TXG
* We subtract TXG_CONCURRENT_STATES to allow for common code.
*/
#define ZILTEST_TXG (UINT64_MAX - TXG_CONCURRENT_STATES)
static int
zil_bp_compare(const void *x1, const void *x2)
{
const dva_t *dva1 = &((zil_bp_node_t *)x1)->zn_dva;
const dva_t *dva2 = &((zil_bp_node_t *)x2)->zn_dva;
if (DVA_GET_VDEV(dva1) < DVA_GET_VDEV(dva2))
return (-1);
if (DVA_GET_VDEV(dva1) > DVA_GET_VDEV(dva2))
return (1);
if (DVA_GET_OFFSET(dva1) < DVA_GET_OFFSET(dva2))
return (-1);
if (DVA_GET_OFFSET(dva1) > DVA_GET_OFFSET(dva2))
return (1);
return (0);
}
static void
zil_bp_tree_init(zilog_t *zilog)
{
avl_create(&zilog->zl_bp_tree, zil_bp_compare,
sizeof (zil_bp_node_t), offsetof(zil_bp_node_t, zn_node));
}
static void
zil_bp_tree_fini(zilog_t *zilog)
{
avl_tree_t *t = &zilog->zl_bp_tree;
zil_bp_node_t *zn;
void *cookie = NULL;
while ((zn = avl_destroy_nodes(t, &cookie)) != NULL)
kmem_free(zn, sizeof (zil_bp_node_t));
avl_destroy(t);
}
int
zil_bp_tree_add(zilog_t *zilog, const blkptr_t *bp)
{
avl_tree_t *t = &zilog->zl_bp_tree;
const dva_t *dva;
zil_bp_node_t *zn;
avl_index_t where;
if (BP_IS_EMBEDDED(bp))
return (0);
dva = BP_IDENTITY(bp);
if (avl_find(t, dva, &where) != NULL)
return (SET_ERROR(EEXIST));
zn = kmem_alloc(sizeof (zil_bp_node_t), KM_SLEEP);
zn->zn_dva = *dva;
avl_insert(t, zn, where);
return (0);
}
static zil_header_t *
zil_header_in_syncing_context(zilog_t *zilog)
{
return ((zil_header_t *)zilog->zl_header);
}
static void
zil_init_log_chain(zilog_t *zilog, blkptr_t *bp)
{
zio_cksum_t *zc = &bp->blk_cksum;
zc->zc_word[ZIL_ZC_GUID_0] = spa_get_random(-1ULL);
zc->zc_word[ZIL_ZC_GUID_1] = spa_get_random(-1ULL);
zc->zc_word[ZIL_ZC_OBJSET] = dmu_objset_id(zilog->zl_os);
zc->zc_word[ZIL_ZC_SEQ] = 1ULL;
}
/*
* Read a log block and make sure it's valid.
*/
static int
zil_read_log_block(zilog_t *zilog, const blkptr_t *bp, blkptr_t *nbp, void *dst,
char **end)
{
enum zio_flag zio_flags = ZIO_FLAG_CANFAIL;
uint32_t aflags = ARC_WAIT;
arc_buf_t *abuf = NULL;
zbookmark_phys_t zb;
int error;
if (zilog->zl_header->zh_claim_txg == 0)
zio_flags |= ZIO_FLAG_SPECULATIVE | ZIO_FLAG_SCRUB;
if (!(zilog->zl_header->zh_flags & ZIL_CLAIM_LR_SEQ_VALID))
zio_flags |= ZIO_FLAG_SPECULATIVE;
SET_BOOKMARK(&zb, bp->blk_cksum.zc_word[ZIL_ZC_OBJSET],
ZB_ZIL_OBJECT, ZB_ZIL_LEVEL, bp->blk_cksum.zc_word[ZIL_ZC_SEQ]);
error = arc_read(NULL, zilog->zl_spa, bp, arc_getbuf_func, &abuf,
ZIO_PRIORITY_SYNC_READ, zio_flags, &aflags, &zb);
if (error == 0) {
zio_cksum_t cksum = bp->blk_cksum;
/*
* Validate the checksummed log block.
*
* Sequence numbers should be... sequential. The checksum
* verifier for the next block should be bp's checksum plus 1.
*
* Also check the log chain linkage and size used.
*/
cksum.zc_word[ZIL_ZC_SEQ]++;
if (BP_GET_CHECKSUM(bp) == ZIO_CHECKSUM_ZILOG2) {
zil_chain_t *zilc = abuf->b_data;
char *lr = (char *)(zilc + 1);
uint64_t len = zilc->zc_nused - sizeof (zil_chain_t);
if (bcmp(&cksum, &zilc->zc_next_blk.blk_cksum,
sizeof (cksum)) || BP_IS_HOLE(&zilc->zc_next_blk)) {
error = SET_ERROR(ECKSUM);
} else {
bcopy(lr, dst, len);
*end = (char *)dst + len;
*nbp = zilc->zc_next_blk;
}
} else {
char *lr = abuf->b_data;
uint64_t size = BP_GET_LSIZE(bp);
zil_chain_t *zilc = (zil_chain_t *)(lr + size) - 1;
if (bcmp(&cksum, &zilc->zc_next_blk.blk_cksum,
sizeof (cksum)) || BP_IS_HOLE(&zilc->zc_next_blk) ||
(zilc->zc_nused > (size - sizeof (*zilc)))) {
error = SET_ERROR(ECKSUM);
} else {
bcopy(lr, dst, zilc->zc_nused);
*end = (char *)dst + zilc->zc_nused;
*nbp = zilc->zc_next_blk;
}
}
VERIFY(arc_buf_remove_ref(abuf, &abuf));
}
return (error);
}
/*
* Read a TX_WRITE log data block.
*/
static int
zil_read_log_data(zilog_t *zilog, const lr_write_t *lr, void *wbuf)
{
enum zio_flag zio_flags = ZIO_FLAG_CANFAIL;
const blkptr_t *bp = &lr->lr_blkptr;
uint32_t aflags = ARC_WAIT;
arc_buf_t *abuf = NULL;
zbookmark_phys_t zb;
int error;
if (BP_IS_HOLE(bp)) {
if (wbuf != NULL)
bzero(wbuf, MAX(BP_GET_LSIZE(bp), lr->lr_length));
return (0);
}
if (zilog->zl_header->zh_claim_txg == 0)
zio_flags |= ZIO_FLAG_SPECULATIVE | ZIO_FLAG_SCRUB;
SET_BOOKMARK(&zb, dmu_objset_id(zilog->zl_os), lr->lr_foid,
ZB_ZIL_LEVEL, lr->lr_offset / BP_GET_LSIZE(bp));
error = arc_read(NULL, zilog->zl_spa, bp, arc_getbuf_func, &abuf,
ZIO_PRIORITY_SYNC_READ, zio_flags, &aflags, &zb);
if (error == 0) {
if (wbuf != NULL)
bcopy(abuf->b_data, wbuf, arc_buf_size(abuf));
(void) arc_buf_remove_ref(abuf, &abuf);
}
return (error);
}
/*
* Parse the intent log, and call parse_func for each valid record within.
*/
int
zil_parse(zilog_t *zilog, zil_parse_blk_func_t *parse_blk_func,
zil_parse_lr_func_t *parse_lr_func, void *arg, uint64_t txg)
{
const zil_header_t *zh = zilog->zl_header;
boolean_t claimed = !!zh->zh_claim_txg;
uint64_t claim_blk_seq = claimed ? zh->zh_claim_blk_seq : UINT64_MAX;
uint64_t claim_lr_seq = claimed ? zh->zh_claim_lr_seq : UINT64_MAX;
uint64_t max_blk_seq = 0;
uint64_t max_lr_seq = 0;
uint64_t blk_count = 0;
uint64_t lr_count = 0;
blkptr_t blk, next_blk;
char *lrbuf, *lrp;
int error = 0;
bzero(&next_blk, sizeof (blkptr_t));
/*
* Old logs didn't record the maximum zh_claim_lr_seq.
*/
if (!(zh->zh_flags & ZIL_CLAIM_LR_SEQ_VALID))
claim_lr_seq = UINT64_MAX;
/*
* Starting at the block pointed to by zh_log we read the log chain.
* For each block in the chain we strongly check that block to
* ensure its validity. We stop when an invalid block is found.
* For each block pointer in the chain we call parse_blk_func().
* For each record in each valid block we call parse_lr_func().
* If the log has been claimed, stop if we encounter a sequence
* number greater than the highest claimed sequence number.
*/
lrbuf = zio_buf_alloc(SPA_MAXBLOCKSIZE);
zil_bp_tree_init(zilog);
for (blk = zh->zh_log; !BP_IS_HOLE(&blk); blk = next_blk) {
uint64_t blk_seq = blk.blk_cksum.zc_word[ZIL_ZC_SEQ];
int reclen;
char *end = NULL;
if (blk_seq > claim_blk_seq)
break;
if ((error = parse_blk_func(zilog, &blk, arg, txg)) != 0)
break;
ASSERT3U(max_blk_seq, <, blk_seq);
max_blk_seq = blk_seq;
blk_count++;
if (max_lr_seq == claim_lr_seq && max_blk_seq == claim_blk_seq)
break;
error = zil_read_log_block(zilog, &blk, &next_blk, lrbuf, &end);
if (error != 0)
break;
for (lrp = lrbuf; lrp < end; lrp += reclen) {
lr_t *lr = (lr_t *)lrp;
reclen = lr->lrc_reclen;
ASSERT3U(reclen, >=, sizeof (lr_t));
if (lr->lrc_seq > claim_lr_seq)
goto done;
if ((error = parse_lr_func(zilog, lr, arg, txg)) != 0)
goto done;
ASSERT3U(max_lr_seq, <, lr->lrc_seq);
max_lr_seq = lr->lrc_seq;
lr_count++;
}
}
done:
zilog->zl_parse_error = error;
zilog->zl_parse_blk_seq = max_blk_seq;
zilog->zl_parse_lr_seq = max_lr_seq;
zilog->zl_parse_blk_count = blk_count;
zilog->zl_parse_lr_count = lr_count;
ASSERT(!claimed || !(zh->zh_flags & ZIL_CLAIM_LR_SEQ_VALID) ||
(max_blk_seq == claim_blk_seq && max_lr_seq == claim_lr_seq));
zil_bp_tree_fini(zilog);
zio_buf_free(lrbuf, SPA_MAXBLOCKSIZE);
return (error);
}
static int
zil_claim_log_block(zilog_t *zilog, blkptr_t *bp, void *tx, uint64_t first_txg)
{
/*
* Claim log block if not already committed and not already claimed.
* If tx == NULL, just verify that the block is claimable.
*/
if (BP_IS_HOLE(bp) || bp->blk_birth < first_txg ||
zil_bp_tree_add(zilog, bp) != 0)
return (0);
return (zio_wait(zio_claim(NULL, zilog->zl_spa,
tx == NULL ? 0 : first_txg, bp, spa_claim_notify, NULL,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE | ZIO_FLAG_SCRUB)));
}
static int
zil_claim_log_record(zilog_t *zilog, lr_t *lrc, void *tx, uint64_t first_txg)
{
lr_write_t *lr = (lr_write_t *)lrc;
int error;
if (lrc->lrc_txtype != TX_WRITE)
return (0);
/*
* If the block is not readable, don't claim it. This can happen
* in normal operation when a log block is written to disk before
* some of the dmu_sync() blocks it points to. In this case, the
* transaction cannot have been committed to anyone (we would have
* waited for all writes to be stable first), so it is semantically
* correct to declare this the end of the log.
*/
if (lr->lr_blkptr.blk_birth >= first_txg &&
(error = zil_read_log_data(zilog, lr, NULL)) != 0)
return (error);
return (zil_claim_log_block(zilog, &lr->lr_blkptr, tx, first_txg));
}
/* ARGSUSED */
static int
zil_free_log_block(zilog_t *zilog, blkptr_t *bp, void *tx, uint64_t claim_txg)
{
zio_free_zil(zilog->zl_spa, dmu_tx_get_txg(tx), bp);
return (0);
}
static int
zil_free_log_record(zilog_t *zilog, lr_t *lrc, void *tx, uint64_t claim_txg)
{
lr_write_t *lr = (lr_write_t *)lrc;
blkptr_t *bp = &lr->lr_blkptr;
/*
* If we previously claimed it, we need to free it.
*/
if (claim_txg != 0 && lrc->lrc_txtype == TX_WRITE &&
bp->blk_birth >= claim_txg && zil_bp_tree_add(zilog, bp) == 0 &&
!BP_IS_HOLE(bp))
zio_free(zilog->zl_spa, dmu_tx_get_txg(tx), bp);
return (0);
}
static lwb_t *
zil_alloc_lwb(zilog_t *zilog, blkptr_t *bp, uint64_t txg, boolean_t fastwrite)
{
lwb_t *lwb;
lwb = kmem_cache_alloc(zil_lwb_cache, KM_SLEEP);
lwb->lwb_zilog = zilog;
lwb->lwb_blk = *bp;
lwb->lwb_fastwrite = fastwrite;
lwb->lwb_buf = zio_buf_alloc(BP_GET_LSIZE(bp));
lwb->lwb_max_txg = txg;
lwb->lwb_zio = NULL;
lwb->lwb_tx = NULL;
if (BP_GET_CHECKSUM(bp) == ZIO_CHECKSUM_ZILOG2) {
lwb->lwb_nused = sizeof (zil_chain_t);
lwb->lwb_sz = BP_GET_LSIZE(bp);
} else {
lwb->lwb_nused = 0;
lwb->lwb_sz = BP_GET_LSIZE(bp) - sizeof (zil_chain_t);
}
mutex_enter(&zilog->zl_lock);
list_insert_tail(&zilog->zl_lwb_list, lwb);
mutex_exit(&zilog->zl_lock);
return (lwb);
}
/*
* Called when we create in-memory log transactions so that we know
* to cleanup the itxs at the end of spa_sync().
*/
void
zilog_dirty(zilog_t *zilog, uint64_t txg)
{
dsl_pool_t *dp = zilog->zl_dmu_pool;
dsl_dataset_t *ds = dmu_objset_ds(zilog->zl_os);
if (dsl_dataset_is_snapshot(ds))
panic("dirtying snapshot!");
if (txg_list_add(&dp->dp_dirty_zilogs, zilog, txg)) {
/* up the hold count until we can be written out */
dmu_buf_add_ref(ds->ds_dbuf, zilog);
}
}
boolean_t
zilog_is_dirty(zilog_t *zilog)
{
dsl_pool_t *dp = zilog->zl_dmu_pool;
int t;
for (t = 0; t < TXG_SIZE; t++) {
if (txg_list_member(&dp->dp_dirty_zilogs, zilog, t))
return (B_TRUE);
}
return (B_FALSE);
}
/*
* Create an on-disk intent log.
*/
static lwb_t *
zil_create(zilog_t *zilog)
{
const zil_header_t *zh = zilog->zl_header;
lwb_t *lwb = NULL;
uint64_t txg = 0;
dmu_tx_t *tx = NULL;
blkptr_t blk;
int error = 0;
boolean_t fastwrite = FALSE;
/*
* Wait for any previous destroy to complete.
*/
txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
ASSERT(zh->zh_claim_txg == 0);
ASSERT(zh->zh_replay_seq == 0);
blk = zh->zh_log;
/*
* Allocate an initial log block if:
* - there isn't one already
* - the existing block is the wrong endianess
*/
if (BP_IS_HOLE(&blk) || BP_SHOULD_BYTESWAP(&blk)) {
tx = dmu_tx_create(zilog->zl_os);
VERIFY(dmu_tx_assign(tx, TXG_WAIT) == 0);
dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
txg = dmu_tx_get_txg(tx);
if (!BP_IS_HOLE(&blk)) {
zio_free_zil(zilog->zl_spa, txg, &blk);
BP_ZERO(&blk);
}
error = zio_alloc_zil(zilog->zl_spa, txg, &blk,
ZIL_MIN_BLKSZ, B_TRUE);
fastwrite = TRUE;
if (error == 0)
zil_init_log_chain(zilog, &blk);
}
/*
* Allocate a log write buffer (lwb) for the first log block.
*/
if (error == 0)
lwb = zil_alloc_lwb(zilog, &blk, txg, fastwrite);
/*
* If we just allocated the first log block, commit our transaction
* and wait for zil_sync() to stuff the block poiner into zh_log.
* (zh is part of the MOS, so we cannot modify it in open context.)
*/
if (tx != NULL) {
dmu_tx_commit(tx);
txg_wait_synced(zilog->zl_dmu_pool, txg);
}
ASSERT(bcmp(&blk, &zh->zh_log, sizeof (blk)) == 0);
return (lwb);
}
/*
* In one tx, free all log blocks and clear the log header.
* If keep_first is set, then we're replaying a log with no content.
* We want to keep the first block, however, so that the first
* synchronous transaction doesn't require a txg_wait_synced()
* in zil_create(). We don't need to txg_wait_synced() here either
* when keep_first is set, because both zil_create() and zil_destroy()
* will wait for any in-progress destroys to complete.
*/
void
zil_destroy(zilog_t *zilog, boolean_t keep_first)
{
const zil_header_t *zh = zilog->zl_header;
lwb_t *lwb;
dmu_tx_t *tx;
uint64_t txg;
/*
* Wait for any previous destroy to complete.
*/
txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
zilog->zl_old_header = *zh; /* debugging aid */
if (BP_IS_HOLE(&zh->zh_log))
return;
tx = dmu_tx_create(zilog->zl_os);
VERIFY(dmu_tx_assign(tx, TXG_WAIT) == 0);
dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
txg = dmu_tx_get_txg(tx);
mutex_enter(&zilog->zl_lock);
ASSERT3U(zilog->zl_destroy_txg, <, txg);
zilog->zl_destroy_txg = txg;
zilog->zl_keep_first = keep_first;
if (!list_is_empty(&zilog->zl_lwb_list)) {
ASSERT(zh->zh_claim_txg == 0);
VERIFY(!keep_first);
while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) {
ASSERT(lwb->lwb_zio == NULL);
if (lwb->lwb_fastwrite)
metaslab_fastwrite_unmark(zilog->zl_spa,
&lwb->lwb_blk);
list_remove(&zilog->zl_lwb_list, lwb);
if (lwb->lwb_buf != NULL)
zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
zio_free_zil(zilog->zl_spa, txg, &lwb->lwb_blk);
kmem_cache_free(zil_lwb_cache, lwb);
}
} else if (!keep_first) {
zil_destroy_sync(zilog, tx);
}
mutex_exit(&zilog->zl_lock);
dmu_tx_commit(tx);
}
void
zil_destroy_sync(zilog_t *zilog, dmu_tx_t *tx)
{
ASSERT(list_is_empty(&zilog->zl_lwb_list));
(void) zil_parse(zilog, zil_free_log_block,
zil_free_log_record, tx, zilog->zl_header->zh_claim_txg);
}
int
zil_claim(const char *osname, void *txarg)
{
dmu_tx_t *tx = txarg;
uint64_t first_txg = dmu_tx_get_txg(tx);
zilog_t *zilog;
zil_header_t *zh;
objset_t *os;
int error;
error = dmu_objset_own(osname, DMU_OST_ANY, B_FALSE, FTAG, &os);
if (error != 0) {
/*
* EBUSY indicates that the objset is inconsistent, in which
* case it can not have a ZIL.
*/
if (error != EBUSY) {
cmn_err(CE_WARN, "can't open objset for %s, error %u",
osname, error);
}
return (0);
}
zilog = dmu_objset_zil(os);
zh = zil_header_in_syncing_context(zilog);
if (spa_get_log_state(zilog->zl_spa) == SPA_LOG_CLEAR) {
if (!BP_IS_HOLE(&zh->zh_log))
zio_free_zil(zilog->zl_spa, first_txg, &zh->zh_log);
BP_ZERO(&zh->zh_log);
dsl_dataset_dirty(dmu_objset_ds(os), tx);
dmu_objset_disown(os, FTAG);
return (0);
}
/*
* Claim all log blocks if we haven't already done so, and remember
* the highest claimed sequence number. This ensures that if we can
* read only part of the log now (e.g. due to a missing device),
* but we can read the entire log later, we will not try to replay
* or destroy beyond the last block we successfully claimed.
*/
ASSERT3U(zh->zh_claim_txg, <=, first_txg);
if (zh->zh_claim_txg == 0 && !BP_IS_HOLE(&zh->zh_log)) {
(void) zil_parse(zilog, zil_claim_log_block,
zil_claim_log_record, tx, first_txg);
zh->zh_claim_txg = first_txg;
zh->zh_claim_blk_seq = zilog->zl_parse_blk_seq;
zh->zh_claim_lr_seq = zilog->zl_parse_lr_seq;
if (zilog->zl_parse_lr_count || zilog->zl_parse_blk_count > 1)
zh->zh_flags |= ZIL_REPLAY_NEEDED;
zh->zh_flags |= ZIL_CLAIM_LR_SEQ_VALID;
dsl_dataset_dirty(dmu_objset_ds(os), tx);
}
ASSERT3U(first_txg, ==, (spa_last_synced_txg(zilog->zl_spa) + 1));
dmu_objset_disown(os, FTAG);
return (0);
}
/*
* Check the log by walking the log chain.
* Checksum errors are ok as they indicate the end of the chain.
* Any other error (no device or read failure) returns an error.
*/
int
zil_check_log_chain(const char *osname, void *tx)
{
zilog_t *zilog;
objset_t *os;
blkptr_t *bp;
int error;
ASSERT(tx == NULL);
error = dmu_objset_hold(osname, FTAG, &os);
if (error != 0) {
cmn_err(CE_WARN, "can't open objset for %s", osname);
return (0);
}
zilog = dmu_objset_zil(os);
bp = (blkptr_t *)&zilog->zl_header->zh_log;
/*
* Check the first block and determine if it's on a log device
* which may have been removed or faulted prior to loading this
* pool. If so, there's no point in checking the rest of the log
* as its content should have already been synced to the pool.
*/
if (!BP_IS_HOLE(bp)) {
vdev_t *vd;
boolean_t valid = B_TRUE;
spa_config_enter(os->os_spa, SCL_STATE, FTAG, RW_READER);
vd = vdev_lookup_top(os->os_spa, DVA_GET_VDEV(&bp->blk_dva[0]));
if (vd->vdev_islog && vdev_is_dead(vd))
valid = vdev_log_state_valid(vd);
spa_config_exit(os->os_spa, SCL_STATE, FTAG);
if (!valid) {
dmu_objset_rele(os, FTAG);
return (0);
}
}
/*
* Because tx == NULL, zil_claim_log_block() will not actually claim
* any blocks, but just determine whether it is possible to do so.
* In addition to checking the log chain, zil_claim_log_block()
* will invoke zio_claim() with a done func of spa_claim_notify(),
* which will update spa_max_claim_txg. See spa_load() for details.
*/
error = zil_parse(zilog, zil_claim_log_block, zil_claim_log_record, tx,
zilog->zl_header->zh_claim_txg ? -1ULL : spa_first_txg(os->os_spa));
dmu_objset_rele(os, FTAG);
return ((error == ECKSUM || error == ENOENT) ? 0 : error);
}
static int
zil_vdev_compare(const void *x1, const void *x2)
{
const uint64_t v1 = ((zil_vdev_node_t *)x1)->zv_vdev;
const uint64_t v2 = ((zil_vdev_node_t *)x2)->zv_vdev;
if (v1 < v2)
return (-1);
if (v1 > v2)
return (1);
return (0);
}
void
zil_add_block(zilog_t *zilog, const blkptr_t *bp)
{
avl_tree_t *t = &zilog->zl_vdev_tree;
avl_index_t where;
zil_vdev_node_t *zv, zvsearch;
int ndvas = BP_GET_NDVAS(bp);
int i;
if (zfs_nocacheflush)
return;
ASSERT(zilog->zl_writer);
/*
* Even though we're zl_writer, we still need a lock because the
* zl_get_data() callbacks may have dmu_sync() done callbacks
* that will run concurrently.
*/
mutex_enter(&zilog->zl_vdev_lock);
for (i = 0; i < ndvas; i++) {
zvsearch.zv_vdev = DVA_GET_VDEV(&bp->blk_dva[i]);
if (avl_find(t, &zvsearch, &where) == NULL) {
zv = kmem_alloc(sizeof (*zv), KM_SLEEP);
zv->zv_vdev = zvsearch.zv_vdev;
avl_insert(t, zv, where);
}
}
mutex_exit(&zilog->zl_vdev_lock);
}
static void
zil_flush_vdevs(zilog_t *zilog)
{
spa_t *spa = zilog->zl_spa;
avl_tree_t *t = &zilog->zl_vdev_tree;
void *cookie = NULL;
zil_vdev_node_t *zv;
zio_t *zio;
ASSERT(zilog->zl_writer);
/*
* We don't need zl_vdev_lock here because we're the zl_writer,
* and all zl_get_data() callbacks are done.
*/
if (avl_numnodes(t) == 0)
return;
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
zio = zio_root(spa, NULL, NULL, ZIO_FLAG_CANFAIL);
while ((zv = avl_destroy_nodes(t, &cookie)) != NULL) {
vdev_t *vd = vdev_lookup_top(spa, zv->zv_vdev);
if (vd != NULL)
zio_flush(zio, vd);
kmem_free(zv, sizeof (*zv));
}
/*
* Wait for all the flushes to complete. Not all devices actually
* support the DKIOCFLUSHWRITECACHE ioctl, so it's OK if it fails.
*/
(void) zio_wait(zio);
spa_config_exit(spa, SCL_STATE, FTAG);
}
/*
* Function called when a log block write completes
*/
static void
zil_lwb_write_done(zio_t *zio)
{
lwb_t *lwb = zio->io_private;
zilog_t *zilog = lwb->lwb_zilog;
dmu_tx_t *tx = lwb->lwb_tx;
ASSERT(BP_GET_COMPRESS(zio->io_bp) == ZIO_COMPRESS_OFF);
ASSERT(BP_GET_TYPE(zio->io_bp) == DMU_OT_INTENT_LOG);
ASSERT(BP_GET_LEVEL(zio->io_bp) == 0);
ASSERT(BP_GET_BYTEORDER(zio->io_bp) == ZFS_HOST_BYTEORDER);
ASSERT(!BP_IS_GANG(zio->io_bp));
ASSERT(!BP_IS_HOLE(zio->io_bp));
ASSERT(BP_GET_FILL(zio->io_bp) == 0);
/*
* Ensure the lwb buffer pointer is cleared before releasing
* the txg. If we have had an allocation failure and
* the txg is waiting to sync then we want want zil_sync()
* to remove the lwb so that it's not picked up as the next new
* one in zil_commit_writer(). zil_sync() will only remove
* the lwb if lwb_buf is null.
*/
zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
mutex_enter(&zilog->zl_lock);
lwb->lwb_zio = NULL;
lwb->lwb_fastwrite = FALSE;
lwb->lwb_buf = NULL;
lwb->lwb_tx = NULL;
mutex_exit(&zilog->zl_lock);
/*
* Now that we've written this log block, we have a stable pointer
* to the next block in the chain, so it's OK to let the txg in
* which we allocated the next block sync.
*/
dmu_tx_commit(tx);
}
/*
* Initialize the io for a log block.
*/
static void
zil_lwb_write_init(zilog_t *zilog, lwb_t *lwb)
{
zbookmark_phys_t zb;
SET_BOOKMARK(&zb, lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_OBJSET],
ZB_ZIL_OBJECT, ZB_ZIL_LEVEL,
lwb->lwb_blk.blk_cksum.zc_word[ZIL_ZC_SEQ]);
if (zilog->zl_root_zio == NULL) {
zilog->zl_root_zio = zio_root(zilog->zl_spa, NULL, NULL,
ZIO_FLAG_CANFAIL);
}
/* Lock so zil_sync() doesn't fastwrite_unmark after zio is created */
mutex_enter(&zilog->zl_lock);
if (lwb->lwb_zio == NULL) {
if (!lwb->lwb_fastwrite) {
metaslab_fastwrite_mark(zilog->zl_spa, &lwb->lwb_blk);
lwb->lwb_fastwrite = 1;
}
lwb->lwb_zio = zio_rewrite(zilog->zl_root_zio, zilog->zl_spa,
0, &lwb->lwb_blk, lwb->lwb_buf, BP_GET_LSIZE(&lwb->lwb_blk),
zil_lwb_write_done, lwb, ZIO_PRIORITY_SYNC_WRITE,
ZIO_FLAG_CANFAIL | ZIO_FLAG_DONT_PROPAGATE |
ZIO_FLAG_FASTWRITE, &zb);
}
mutex_exit(&zilog->zl_lock);
}
/*
* Define a limited set of intent log block sizes.
*
* These must be a multiple of 4KB. Note only the amount used (again
* aligned to 4KB) actually gets written. However, we can't always just
* allocate SPA_MAXBLOCKSIZE as the slog space could be exhausted.
*/
uint64_t zil_block_buckets[] = {
4096, /* non TX_WRITE */
8192+4096, /* data base */
32*1024 + 4096, /* NFS writes */
UINT64_MAX
};
/*
* Use the slog as long as the current commit size is less than the
* limit or the total list size is less than 2X the limit. Limit
* checking is disabled by setting zil_slog_limit to UINT64_MAX.
*/
unsigned long zil_slog_limit = 1024 * 1024;
#define USE_SLOG(zilog) (((zilog)->zl_cur_used < zil_slog_limit) || \
((zilog)->zl_itx_list_sz < (zil_slog_limit << 1)))
/*
* Start a log block write and advance to the next log block.
* Calls are serialized.
*/
static lwb_t *
zil_lwb_write_start(zilog_t *zilog, lwb_t *lwb)
{
lwb_t *nlwb = NULL;
zil_chain_t *zilc;
spa_t *spa = zilog->zl_spa;
blkptr_t *bp;
dmu_tx_t *tx;
uint64_t txg;
uint64_t zil_blksz, wsz;
int i, error;
boolean_t use_slog;
if (BP_GET_CHECKSUM(&lwb->lwb_blk) == ZIO_CHECKSUM_ZILOG2) {
zilc = (zil_chain_t *)lwb->lwb_buf;
bp = &zilc->zc_next_blk;
} else {
zilc = (zil_chain_t *)(lwb->lwb_buf + lwb->lwb_sz);
bp = &zilc->zc_next_blk;
}
ASSERT(lwb->lwb_nused <= lwb->lwb_sz);
/*
* Allocate the next block and save its address in this block
* before writing it in order to establish the log chain.
* Note that if the allocation of nlwb synced before we wrote
* the block that points at it (lwb), we'd leak it if we crashed.
* Therefore, we don't do dmu_tx_commit() until zil_lwb_write_done().
* We dirty the dataset to ensure that zil_sync() will be called
* to clean up in the event of allocation failure or I/O failure.
*/
tx = dmu_tx_create(zilog->zl_os);
VERIFY(dmu_tx_assign(tx, TXG_WAIT) == 0);
dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
txg = dmu_tx_get_txg(tx);
lwb->lwb_tx = tx;
/*
* Log blocks are pre-allocated. Here we select the size of the next
* block, based on size used in the last block.
* - first find the smallest bucket that will fit the block from a
* limited set of block sizes. This is because it's faster to write
* blocks allocated from the same metaslab as they are adjacent or
* close.
* - next find the maximum from the new suggested size and an array of
* previous sizes. This lessens a picket fence effect of wrongly
* guesssing the size if we have a stream of say 2k, 64k, 2k, 64k
* requests.
*
* Note we only write what is used, but we can't just allocate
* the maximum block size because we can exhaust the available
* pool log space.
*/
zil_blksz = zilog->zl_cur_used + sizeof (zil_chain_t);
for (i = 0; zil_blksz > zil_block_buckets[i]; i++)
continue;
zil_blksz = zil_block_buckets[i];
if (zil_blksz == UINT64_MAX)
zil_blksz = SPA_MAXBLOCKSIZE;
zilog->zl_prev_blks[zilog->zl_prev_rotor] = zil_blksz;
for (i = 0; i < ZIL_PREV_BLKS; i++)
zil_blksz = MAX(zil_blksz, zilog->zl_prev_blks[i]);
zilog->zl_prev_rotor = (zilog->zl_prev_rotor + 1) & (ZIL_PREV_BLKS - 1);
BP_ZERO(bp);
use_slog = USE_SLOG(zilog);
error = zio_alloc_zil(spa, txg, bp, zil_blksz,
USE_SLOG(zilog));
if (use_slog) {
ZIL_STAT_BUMP(zil_itx_metaslab_slog_count);
ZIL_STAT_INCR(zil_itx_metaslab_slog_bytes, lwb->lwb_nused);
} else {
ZIL_STAT_BUMP(zil_itx_metaslab_normal_count);
ZIL_STAT_INCR(zil_itx_metaslab_normal_bytes, lwb->lwb_nused);
}
if (error == 0) {
ASSERT3U(bp->blk_birth, ==, txg);
bp->blk_cksum = lwb->lwb_blk.blk_cksum;
bp->blk_cksum.zc_word[ZIL_ZC_SEQ]++;
/*
* Allocate a new log write buffer (lwb).
*/
nlwb = zil_alloc_lwb(zilog, bp, txg, TRUE);
/* Record the block for later vdev flushing */
zil_add_block(zilog, &lwb->lwb_blk);
}
if (BP_GET_CHECKSUM(&lwb->lwb_blk) == ZIO_CHECKSUM_ZILOG2) {
/* For Slim ZIL only write what is used. */
wsz = P2ROUNDUP_TYPED(lwb->lwb_nused, ZIL_MIN_BLKSZ, uint64_t);
ASSERT3U(wsz, <=, lwb->lwb_sz);
zio_shrink(lwb->lwb_zio, wsz);
} else {
wsz = lwb->lwb_sz;
}
zilc->zc_pad = 0;
zilc->zc_nused = lwb->lwb_nused;
zilc->zc_eck.zec_cksum = lwb->lwb_blk.blk_cksum;
/*
* clear unused data for security
*/
bzero(lwb->lwb_buf + lwb->lwb_nused, wsz - lwb->lwb_nused);
zio_nowait(lwb->lwb_zio); /* Kick off the write for the old log block */
/*
* If there was an allocation failure then nlwb will be null which
* forces a txg_wait_synced().
*/
return (nlwb);
}
static lwb_t *
zil_lwb_commit(zilog_t *zilog, itx_t *itx, lwb_t *lwb)
{
lr_t *lrc = &itx->itx_lr; /* common log record */
lr_write_t *lrw = (lr_write_t *)lrc;
char *lr_buf;
uint64_t txg = lrc->lrc_txg;
uint64_t reclen = lrc->lrc_reclen;
uint64_t dlen = 0;
if (lwb == NULL)
return (NULL);
ASSERT(lwb->lwb_buf != NULL);
ASSERT(zilog_is_dirty(zilog) ||
spa_freeze_txg(zilog->zl_spa) != UINT64_MAX);
if (lrc->lrc_txtype == TX_WRITE && itx->itx_wr_state == WR_NEED_COPY)
dlen = P2ROUNDUP_TYPED(
lrw->lr_length, sizeof (uint64_t), uint64_t);
zilog->zl_cur_used += (reclen + dlen);
zil_lwb_write_init(zilog, lwb);
/*
* If this record won't fit in the current log block, start a new one.
*/
if (lwb->lwb_nused + reclen + dlen > lwb->lwb_sz) {
lwb = zil_lwb_write_start(zilog, lwb);
if (lwb == NULL)
return (NULL);
zil_lwb_write_init(zilog, lwb);
ASSERT(LWB_EMPTY(lwb));
if (lwb->lwb_nused + reclen + dlen > lwb->lwb_sz) {
txg_wait_synced(zilog->zl_dmu_pool, txg);
return (lwb);
}
}
lr_buf = lwb->lwb_buf + lwb->lwb_nused;
bcopy(lrc, lr_buf, reclen);
lrc = (lr_t *)lr_buf;
lrw = (lr_write_t *)lrc;
ZIL_STAT_BUMP(zil_itx_count);
/*
* If it's a write, fetch the data or get its blkptr as appropriate.
*/
if (lrc->lrc_txtype == TX_WRITE) {
if (txg > spa_freeze_txg(zilog->zl_spa))
txg_wait_synced(zilog->zl_dmu_pool, txg);
if (itx->itx_wr_state == WR_COPIED) {
ZIL_STAT_BUMP(zil_itx_copied_count);
ZIL_STAT_INCR(zil_itx_copied_bytes, lrw->lr_length);
} else {
char *dbuf;
int error;
if (dlen) {
ASSERT(itx->itx_wr_state == WR_NEED_COPY);
dbuf = lr_buf + reclen;
lrw->lr_common.lrc_reclen += dlen;
ZIL_STAT_BUMP(zil_itx_needcopy_count);
ZIL_STAT_INCR(zil_itx_needcopy_bytes,
lrw->lr_length);
} else {
ASSERT(itx->itx_wr_state == WR_INDIRECT);
dbuf = NULL;
ZIL_STAT_BUMP(zil_itx_indirect_count);
ZIL_STAT_INCR(zil_itx_indirect_bytes,
lrw->lr_length);
}
error = zilog->zl_get_data(
itx->itx_private, lrw, dbuf, lwb->lwb_zio);
if (error == EIO) {
txg_wait_synced(zilog->zl_dmu_pool, txg);
return (lwb);
}
if (error != 0) {
ASSERT(error == ENOENT || error == EEXIST ||
error == EALREADY);
return (lwb);
}
}
}
/*
* We're actually making an entry, so update lrc_seq to be the
* log record sequence number. Note that this is generally not
* equal to the itx sequence number because not all transactions
* are synchronous, and sometimes spa_sync() gets there first.
*/
lrc->lrc_seq = ++zilog->zl_lr_seq; /* we are single threaded */
lwb->lwb_nused += reclen + dlen;
lwb->lwb_max_txg = MAX(lwb->lwb_max_txg, txg);
ASSERT3U(lwb->lwb_nused, <=, lwb->lwb_sz);
ASSERT0(P2PHASE(lwb->lwb_nused, sizeof (uint64_t)));
return (lwb);
}
itx_t *
zil_itx_create(uint64_t txtype, size_t lrsize)
{
itx_t *itx;
lrsize = P2ROUNDUP_TYPED(lrsize, sizeof (uint64_t), size_t);
itx = zio_data_buf_alloc(offsetof(itx_t, itx_lr) + lrsize);
itx->itx_lr.lrc_txtype = txtype;
itx->itx_lr.lrc_reclen = lrsize;
itx->itx_sod = lrsize; /* if write & WR_NEED_COPY will be increased */
itx->itx_lr.lrc_seq = 0; /* defensive */
itx->itx_sync = B_TRUE; /* default is synchronous */
itx->itx_callback = NULL;
itx->itx_callback_data = NULL;
return (itx);
}
void
zil_itx_destroy(itx_t *itx)
{
zio_data_buf_free(itx, offsetof(itx_t, itx_lr)+itx->itx_lr.lrc_reclen);
}
/*
* Free up the sync and async itxs. The itxs_t has already been detached
* so no locks are needed.
*/
static void
zil_itxg_clean(itxs_t *itxs)
{
itx_t *itx;
list_t *list;
avl_tree_t *t;
void *cookie;
itx_async_node_t *ian;
list = &itxs->i_sync_list;
while ((itx = list_head(list)) != NULL) {
if (itx->itx_callback != NULL)
itx->itx_callback(itx->itx_callback_data);
list_remove(list, itx);
zil_itx_destroy(itx);
}
cookie = NULL;
t = &itxs->i_async_tree;
while ((ian = avl_destroy_nodes(t, &cookie)) != NULL) {
list = &ian->ia_list;
while ((itx = list_head(list)) != NULL) {
if (itx->itx_callback != NULL)
itx->itx_callback(itx->itx_callback_data);
list_remove(list, itx);
zil_itx_destroy(itx);
}
list_destroy(list);
kmem_free(ian, sizeof (itx_async_node_t));
}
avl_destroy(t);
kmem_free(itxs, sizeof (itxs_t));
}
static int
zil_aitx_compare(const void *x1, const void *x2)
{
const uint64_t o1 = ((itx_async_node_t *)x1)->ia_foid;
const uint64_t o2 = ((itx_async_node_t *)x2)->ia_foid;
if (o1 < o2)
return (-1);
if (o1 > o2)
return (1);
return (0);
}
/*
* Remove all async itx with the given oid.
*/
static void
zil_remove_async(zilog_t *zilog, uint64_t oid)
{
uint64_t otxg, txg;
itx_async_node_t *ian;
avl_tree_t *t;
avl_index_t where;
list_t clean_list;
itx_t *itx;
ASSERT(oid != 0);
list_create(&clean_list, sizeof (itx_t), offsetof(itx_t, itx_node));
if (spa_freeze_txg(zilog->zl_spa) != UINT64_MAX) /* ziltest support */
otxg = ZILTEST_TXG;
else
otxg = spa_last_synced_txg(zilog->zl_spa) + 1;
for (txg = otxg; txg < (otxg + TXG_CONCURRENT_STATES); txg++) {
itxg_t *itxg = &zilog->zl_itxg[txg & TXG_MASK];
mutex_enter(&itxg->itxg_lock);
if (itxg->itxg_txg != txg) {
mutex_exit(&itxg->itxg_lock);
continue;
}
/*
* Locate the object node and append its list.
*/
t = &itxg->itxg_itxs->i_async_tree;
ian = avl_find(t, &oid, &where);
if (ian != NULL)
list_move_tail(&clean_list, &ian->ia_list);
mutex_exit(&itxg->itxg_lock);
}
while ((itx = list_head(&clean_list)) != NULL) {
if (itx->itx_callback != NULL)
itx->itx_callback(itx->itx_callback_data);
list_remove(&clean_list, itx);
zil_itx_destroy(itx);
}
list_destroy(&clean_list);
}
void
zil_itx_assign(zilog_t *zilog, itx_t *itx, dmu_tx_t *tx)
{
uint64_t txg;
itxg_t *itxg;
itxs_t *itxs, *clean = NULL;
/*
* Object ids can be re-instantiated in the next txg so
* remove any async transactions to avoid future leaks.
* This can happen if a fsync occurs on the re-instantiated
* object for a WR_INDIRECT or WR_NEED_COPY write, which gets
* the new file data and flushes a write record for the old object.
*/
if ((itx->itx_lr.lrc_txtype & ~TX_CI) == TX_REMOVE)
zil_remove_async(zilog, itx->itx_oid);
/*
* Ensure the data of a renamed file is committed before the rename.
*/
if ((itx->itx_lr.lrc_txtype & ~TX_CI) == TX_RENAME)
zil_async_to_sync(zilog, itx->itx_oid);
if (spa_freeze_txg(zilog->zl_spa) != UINT64_MAX)
txg = ZILTEST_TXG;
else
txg = dmu_tx_get_txg(tx);
itxg = &zilog->zl_itxg[txg & TXG_MASK];
mutex_enter(&itxg->itxg_lock);
itxs = itxg->itxg_itxs;
if (itxg->itxg_txg != txg) {
if (itxs != NULL) {
/*
* The zil_clean callback hasn't got around to cleaning
* this itxg. Save the itxs for release below.
* This should be rare.
*/
atomic_add_64(&zilog->zl_itx_list_sz, -itxg->itxg_sod);
itxg->itxg_sod = 0;
clean = itxg->itxg_itxs;
}
ASSERT(itxg->itxg_sod == 0);
itxg->itxg_txg = txg;
itxs = itxg->itxg_itxs = kmem_zalloc(sizeof (itxs_t),
KM_SLEEP);
list_create(&itxs->i_sync_list, sizeof (itx_t),
offsetof(itx_t, itx_node));
avl_create(&itxs->i_async_tree, zil_aitx_compare,
sizeof (itx_async_node_t),
offsetof(itx_async_node_t, ia_node));
}
if (itx->itx_sync) {
list_insert_tail(&itxs->i_sync_list, itx);
atomic_add_64(&zilog->zl_itx_list_sz, itx->itx_sod);
itxg->itxg_sod += itx->itx_sod;
} else {
avl_tree_t *t = &itxs->i_async_tree;
uint64_t foid = ((lr_ooo_t *)&itx->itx_lr)->lr_foid;
itx_async_node_t *ian;
avl_index_t where;
ian = avl_find(t, &foid, &where);
if (ian == NULL) {
ian = kmem_alloc(sizeof (itx_async_node_t),
KM_SLEEP);
list_create(&ian->ia_list, sizeof (itx_t),
offsetof(itx_t, itx_node));
ian->ia_foid = foid;
avl_insert(t, ian, where);
}
list_insert_tail(&ian->ia_list, itx);
}
itx->itx_lr.lrc_txg = dmu_tx_get_txg(tx);
zilog_dirty(zilog, txg);
mutex_exit(&itxg->itxg_lock);
/* Release the old itxs now we've dropped the lock */
if (clean != NULL)
zil_itxg_clean(clean);
}
/*
* If there are any in-memory intent log transactions which have now been
* synced then start up a taskq to free them. We should only do this after we
* have written out the uberblocks (i.e. txg has been comitted) so that
* don't inadvertently clean out in-memory log records that would be required
* by zil_commit().
*/
void
zil_clean(zilog_t *zilog, uint64_t synced_txg)
{
itxg_t *itxg = &zilog->zl_itxg[synced_txg & TXG_MASK];
itxs_t *clean_me;
mutex_enter(&itxg->itxg_lock);
if (itxg->itxg_itxs == NULL || itxg->itxg_txg == ZILTEST_TXG) {
mutex_exit(&itxg->itxg_lock);
return;
}
ASSERT3U(itxg->itxg_txg, <=, synced_txg);
ASSERT(itxg->itxg_txg != 0);
ASSERT(zilog->zl_clean_taskq != NULL);
atomic_add_64(&zilog->zl_itx_list_sz, -itxg->itxg_sod);
itxg->itxg_sod = 0;
clean_me = itxg->itxg_itxs;
itxg->itxg_itxs = NULL;
itxg->itxg_txg = 0;
mutex_exit(&itxg->itxg_lock);
/*
* Preferably start a task queue to free up the old itxs but
* if taskq_dispatch can't allocate resources to do that then
* free it in-line. This should be rare. Note, using TQ_SLEEP
* created a bad performance problem.
*/
if (taskq_dispatch(zilog->zl_clean_taskq,
(void (*)(void *))zil_itxg_clean, clean_me, TQ_NOSLEEP) == 0)
zil_itxg_clean(clean_me);
}
/*
* Get the list of itxs to commit into zl_itx_commit_list.
*/
static void
zil_get_commit_list(zilog_t *zilog)
{
uint64_t otxg, txg;
list_t *commit_list = &zilog->zl_itx_commit_list;
uint64_t push_sod = 0;
if (spa_freeze_txg(zilog->zl_spa) != UINT64_MAX) /* ziltest support */
otxg = ZILTEST_TXG;
else
otxg = spa_last_synced_txg(zilog->zl_spa) + 1;
for (txg = otxg; txg < (otxg + TXG_CONCURRENT_STATES); txg++) {
itxg_t *itxg = &zilog->zl_itxg[txg & TXG_MASK];
mutex_enter(&itxg->itxg_lock);
if (itxg->itxg_txg != txg) {
mutex_exit(&itxg->itxg_lock);
continue;
}
list_move_tail(commit_list, &itxg->itxg_itxs->i_sync_list);
push_sod += itxg->itxg_sod;
itxg->itxg_sod = 0;
mutex_exit(&itxg->itxg_lock);
}
atomic_add_64(&zilog->zl_itx_list_sz, -push_sod);
}
/*
* Move the async itxs for a specified object to commit into sync lists.
*/
static void
zil_async_to_sync(zilog_t *zilog, uint64_t foid)
{
uint64_t otxg, txg;
itx_async_node_t *ian;
avl_tree_t *t;
avl_index_t where;
if (spa_freeze_txg(zilog->zl_spa) != UINT64_MAX) /* ziltest support */
otxg = ZILTEST_TXG;
else
otxg = spa_last_synced_txg(zilog->zl_spa) + 1;
for (txg = otxg; txg < (otxg + TXG_CONCURRENT_STATES); txg++) {
itxg_t *itxg = &zilog->zl_itxg[txg & TXG_MASK];
mutex_enter(&itxg->itxg_lock);
if (itxg->itxg_txg != txg) {
mutex_exit(&itxg->itxg_lock);
continue;
}
/*
* If a foid is specified then find that node and append its
* list. Otherwise walk the tree appending all the lists
* to the sync list. We add to the end rather than the
* beginning to ensure the create has happened.
*/
t = &itxg->itxg_itxs->i_async_tree;
if (foid != 0) {
ian = avl_find(t, &foid, &where);
if (ian != NULL) {
list_move_tail(&itxg->itxg_itxs->i_sync_list,
&ian->ia_list);
}
} else {
void *cookie = NULL;
while ((ian = avl_destroy_nodes(t, &cookie)) != NULL) {
list_move_tail(&itxg->itxg_itxs->i_sync_list,
&ian->ia_list);
list_destroy(&ian->ia_list);
kmem_free(ian, sizeof (itx_async_node_t));
}
}
mutex_exit(&itxg->itxg_lock);
}
}
static void
zil_commit_writer(zilog_t *zilog)
{
uint64_t txg;
itx_t *itx;
lwb_t *lwb;
spa_t *spa = zilog->zl_spa;
int error = 0;
ASSERT(zilog->zl_root_zio == NULL);
mutex_exit(&zilog->zl_lock);
zil_get_commit_list(zilog);
/*
* Return if there's nothing to commit before we dirty the fs by
* calling zil_create().
*/
if (list_head(&zilog->zl_itx_commit_list) == NULL) {
mutex_enter(&zilog->zl_lock);
return;
}
if (zilog->zl_suspend) {
lwb = NULL;
} else {
lwb = list_tail(&zilog->zl_lwb_list);
if (lwb == NULL)
lwb = zil_create(zilog);
}
DTRACE_PROBE1(zil__cw1, zilog_t *, zilog);
for (itx = list_head(&zilog->zl_itx_commit_list); itx != NULL;
itx = list_next(&zilog->zl_itx_commit_list, itx)) {
txg = itx->itx_lr.lrc_txg;
ASSERT(txg);
if (txg > spa_last_synced_txg(spa) || txg > spa_freeze_txg(spa))
lwb = zil_lwb_commit(zilog, itx, lwb);
}
DTRACE_PROBE1(zil__cw2, zilog_t *, zilog);
/* write the last block out */
if (lwb != NULL && lwb->lwb_zio != NULL)
lwb = zil_lwb_write_start(zilog, lwb);
zilog->zl_cur_used = 0;
/*
* Wait if necessary for the log blocks to be on stable storage.
*/
if (zilog->zl_root_zio) {
error = zio_wait(zilog->zl_root_zio);
zilog->zl_root_zio = NULL;
zil_flush_vdevs(zilog);
}
if (error || lwb == NULL)
txg_wait_synced(zilog->zl_dmu_pool, 0);
while ((itx = list_head(&zilog->zl_itx_commit_list))) {
txg = itx->itx_lr.lrc_txg;
ASSERT(txg);
if (itx->itx_callback != NULL)
itx->itx_callback(itx->itx_callback_data);
list_remove(&zilog->zl_itx_commit_list, itx);
zil_itx_destroy(itx);
}
mutex_enter(&zilog->zl_lock);
/*
* Remember the highest committed log sequence number for ztest.
* We only update this value when all the log writes succeeded,
* because ztest wants to ASSERT that it got the whole log chain.
*/
if (error == 0 && lwb != NULL)
zilog->zl_commit_lr_seq = zilog->zl_lr_seq;
}
/*
* Commit zfs transactions to stable storage.
* If foid is 0 push out all transactions, otherwise push only those
* for that object or might reference that object.
*
* itxs are committed in batches. In a heavily stressed zil there will be
* a commit writer thread who is writing out a bunch of itxs to the log
* for a set of committing threads (cthreads) in the same batch as the writer.
* Those cthreads are all waiting on the same cv for that batch.
*
* There will also be a different and growing batch of threads that are
* waiting to commit (qthreads). When the committing batch completes
* a transition occurs such that the cthreads exit and the qthreads become
* cthreads. One of the new cthreads becomes the writer thread for the
* batch. Any new threads arriving become new qthreads.
*
* Only 2 condition variables are needed and there's no transition
* between the two cvs needed. They just flip-flop between qthreads
* and cthreads.
*
* Using this scheme we can efficiently wakeup up only those threads
* that have been committed.
*/
void
zil_commit(zilog_t *zilog, uint64_t foid)
{
uint64_t mybatch;
if (zilog->zl_sync == ZFS_SYNC_DISABLED)
return;
ZIL_STAT_BUMP(zil_commit_count);
/* move the async itxs for the foid to the sync queues */
zil_async_to_sync(zilog, foid);
mutex_enter(&zilog->zl_lock);
mybatch = zilog->zl_next_batch;
while (zilog->zl_writer) {
cv_wait(&zilog->zl_cv_batch[mybatch & 1], &zilog->zl_lock);
if (mybatch <= zilog->zl_com_batch) {
mutex_exit(&zilog->zl_lock);
return;
}
}
zilog->zl_next_batch++;
zilog->zl_writer = B_TRUE;
ZIL_STAT_BUMP(zil_commit_writer_count);
zil_commit_writer(zilog);
zilog->zl_com_batch = mybatch;
zilog->zl_writer = B_FALSE;
/* wake up one thread to become the next writer */
cv_signal(&zilog->zl_cv_batch[(mybatch+1) & 1]);
/* wake up all threads waiting for this batch to be committed */
cv_broadcast(&zilog->zl_cv_batch[mybatch & 1]);
mutex_exit(&zilog->zl_lock);
}
/*
* Called in syncing context to free committed log blocks and update log header.
*/
void
zil_sync(zilog_t *zilog, dmu_tx_t *tx)
{
zil_header_t *zh = zil_header_in_syncing_context(zilog);
uint64_t txg = dmu_tx_get_txg(tx);
spa_t *spa = zilog->zl_spa;
uint64_t *replayed_seq = &zilog->zl_replayed_seq[txg & TXG_MASK];
lwb_t *lwb;
/*
* We don't zero out zl_destroy_txg, so make sure we don't try
* to destroy it twice.
*/
if (spa_sync_pass(spa) != 1)
return;
mutex_enter(&zilog->zl_lock);
ASSERT(zilog->zl_stop_sync == 0);
if (*replayed_seq != 0) {
ASSERT(zh->zh_replay_seq < *replayed_seq);
zh->zh_replay_seq = *replayed_seq;
*replayed_seq = 0;
}
if (zilog->zl_destroy_txg == txg) {
blkptr_t blk = zh->zh_log;
ASSERT(list_head(&zilog->zl_lwb_list) == NULL);
bzero(zh, sizeof (zil_header_t));
bzero(zilog->zl_replayed_seq, sizeof (zilog->zl_replayed_seq));
if (zilog->zl_keep_first) {
/*
* If this block was part of log chain that couldn't
* be claimed because a device was missing during
* zil_claim(), but that device later returns,
* then this block could erroneously appear valid.
* To guard against this, assign a new GUID to the new
* log chain so it doesn't matter what blk points to.
*/
zil_init_log_chain(zilog, &blk);
zh->zh_log = blk;
}
}
while ((lwb = list_head(&zilog->zl_lwb_list)) != NULL) {
zh->zh_log = lwb->lwb_blk;
if (lwb->lwb_buf != NULL || lwb->lwb_max_txg > txg)
break;
ASSERT(lwb->lwb_zio == NULL);
list_remove(&zilog->zl_lwb_list, lwb);
zio_free_zil(spa, txg, &lwb->lwb_blk);
kmem_cache_free(zil_lwb_cache, lwb);
/*
* If we don't have anything left in the lwb list then
* we've had an allocation failure and we need to zero
* out the zil_header blkptr so that we don't end
* up freeing the same block twice.
*/
if (list_head(&zilog->zl_lwb_list) == NULL)
BP_ZERO(&zh->zh_log);
}
/*
* Remove fastwrite on any blocks that have been pre-allocated for
* the next commit. This prevents fastwrite counter pollution by
* unused, long-lived LWBs.
*/
for (; lwb != NULL; lwb = list_next(&zilog->zl_lwb_list, lwb)) {
if (lwb->lwb_fastwrite && !lwb->lwb_zio) {
metaslab_fastwrite_unmark(zilog->zl_spa, &lwb->lwb_blk);
lwb->lwb_fastwrite = 0;
}
}
mutex_exit(&zilog->zl_lock);
}
void
zil_init(void)
{
zil_lwb_cache = kmem_cache_create("zil_lwb_cache",
sizeof (struct lwb), 0, NULL, NULL, NULL, NULL, NULL, 0);
zil_ksp = kstat_create("zfs", 0, "zil", "misc",
KSTAT_TYPE_NAMED, sizeof (zil_stats) / sizeof (kstat_named_t),
KSTAT_FLAG_VIRTUAL);
if (zil_ksp != NULL) {
zil_ksp->ks_data = &zil_stats;
kstat_install(zil_ksp);
}
}
void
zil_fini(void)
{
kmem_cache_destroy(zil_lwb_cache);
if (zil_ksp != NULL) {
kstat_delete(zil_ksp);
zil_ksp = NULL;
}
}
void
zil_set_sync(zilog_t *zilog, uint64_t sync)
{
zilog->zl_sync = sync;
}
void
zil_set_logbias(zilog_t *zilog, uint64_t logbias)
{
zilog->zl_logbias = logbias;
}
zilog_t *
zil_alloc(objset_t *os, zil_header_t *zh_phys)
{
zilog_t *zilog;
int i;
zilog = kmem_zalloc(sizeof (zilog_t), KM_SLEEP);
zilog->zl_header = zh_phys;
zilog->zl_os = os;
zilog->zl_spa = dmu_objset_spa(os);
zilog->zl_dmu_pool = dmu_objset_pool(os);
zilog->zl_destroy_txg = TXG_INITIAL - 1;
zilog->zl_logbias = dmu_objset_logbias(os);
zilog->zl_sync = dmu_objset_syncprop(os);
zilog->zl_next_batch = 1;
mutex_init(&zilog->zl_lock, NULL, MUTEX_DEFAULT, NULL);
for (i = 0; i < TXG_SIZE; i++) {
mutex_init(&zilog->zl_itxg[i].itxg_lock, NULL,
MUTEX_DEFAULT, NULL);
}
list_create(&zilog->zl_lwb_list, sizeof (lwb_t),
offsetof(lwb_t, lwb_node));
list_create(&zilog->zl_itx_commit_list, sizeof (itx_t),
offsetof(itx_t, itx_node));
mutex_init(&zilog->zl_vdev_lock, NULL, MUTEX_DEFAULT, NULL);
avl_create(&zilog->zl_vdev_tree, zil_vdev_compare,
sizeof (zil_vdev_node_t), offsetof(zil_vdev_node_t, zv_node));
cv_init(&zilog->zl_cv_writer, NULL, CV_DEFAULT, NULL);
cv_init(&zilog->zl_cv_suspend, NULL, CV_DEFAULT, NULL);
cv_init(&zilog->zl_cv_batch[0], NULL, CV_DEFAULT, NULL);
cv_init(&zilog->zl_cv_batch[1], NULL, CV_DEFAULT, NULL);
return (zilog);
}
void
zil_free(zilog_t *zilog)
{
int i;
zilog->zl_stop_sync = 1;
ASSERT0(zilog->zl_suspend);
ASSERT0(zilog->zl_suspending);
ASSERT(list_is_empty(&zilog->zl_lwb_list));
list_destroy(&zilog->zl_lwb_list);
avl_destroy(&zilog->zl_vdev_tree);
mutex_destroy(&zilog->zl_vdev_lock);
ASSERT(list_is_empty(&zilog->zl_itx_commit_list));
list_destroy(&zilog->zl_itx_commit_list);
for (i = 0; i < TXG_SIZE; i++) {
/*
* It's possible for an itx to be generated that doesn't dirty
* a txg (e.g. ztest TX_TRUNCATE). So there's no zil_clean()
* callback to remove the entry. We remove those here.
*
* Also free up the ziltest itxs.
*/
if (zilog->zl_itxg[i].itxg_itxs)
zil_itxg_clean(zilog->zl_itxg[i].itxg_itxs);
mutex_destroy(&zilog->zl_itxg[i].itxg_lock);
}
mutex_destroy(&zilog->zl_lock);
cv_destroy(&zilog->zl_cv_writer);
cv_destroy(&zilog->zl_cv_suspend);
cv_destroy(&zilog->zl_cv_batch[0]);
cv_destroy(&zilog->zl_cv_batch[1]);
kmem_free(zilog, sizeof (zilog_t));
}
/*
* Open an intent log.
*/
zilog_t *
zil_open(objset_t *os, zil_get_data_t *get_data)
{
zilog_t *zilog = dmu_objset_zil(os);
ASSERT(zilog->zl_clean_taskq == NULL);
ASSERT(zilog->zl_get_data == NULL);
ASSERT(list_is_empty(&zilog->zl_lwb_list));
zilog->zl_get_data = get_data;
zilog->zl_clean_taskq = taskq_create("zil_clean", 1, minclsyspri,
2, 2, TASKQ_PREPOPULATE);
return (zilog);
}
/*
* Close an intent log.
*/
void
zil_close(zilog_t *zilog)
{
lwb_t *lwb;
uint64_t txg = 0;
zil_commit(zilog, 0); /* commit all itx */
/*
* The lwb_max_txg for the stubby lwb will reflect the last activity
* for the zil. After a txg_wait_synced() on the txg we know all the
* callbacks have occurred that may clean the zil. Only then can we
* destroy the zl_clean_taskq.
*/
mutex_enter(&zilog->zl_lock);
lwb = list_tail(&zilog->zl_lwb_list);
if (lwb != NULL)
txg = lwb->lwb_max_txg;
mutex_exit(&zilog->zl_lock);
if (txg)
txg_wait_synced(zilog->zl_dmu_pool, txg);
ASSERT(!zilog_is_dirty(zilog));
taskq_destroy(zilog->zl_clean_taskq);
zilog->zl_clean_taskq = NULL;
zilog->zl_get_data = NULL;
/*
* We should have only one LWB left on the list; remove it now.
*/
mutex_enter(&zilog->zl_lock);
lwb = list_head(&zilog->zl_lwb_list);
if (lwb != NULL) {
ASSERT(lwb == list_tail(&zilog->zl_lwb_list));
ASSERT(lwb->lwb_zio == NULL);
if (lwb->lwb_fastwrite)
metaslab_fastwrite_unmark(zilog->zl_spa, &lwb->lwb_blk);
list_remove(&zilog->zl_lwb_list, lwb);
zio_buf_free(lwb->lwb_buf, lwb->lwb_sz);
kmem_cache_free(zil_lwb_cache, lwb);
}
mutex_exit(&zilog->zl_lock);
}
static char *suspend_tag = "zil suspending";
/*
* Suspend an intent log. While in suspended mode, we still honor
* synchronous semantics, but we rely on txg_wait_synced() to do it.
* On old version pools, we suspend the log briefly when taking a
* snapshot so that it will have an empty intent log.
*
* Long holds are not really intended to be used the way we do here --
* held for such a short time. A concurrent caller of dsl_dataset_long_held()
* could fail. Therefore we take pains to only put a long hold if it is
* actually necessary. Fortunately, it will only be necessary if the
* objset is currently mounted (or the ZVOL equivalent). In that case it
* will already have a long hold, so we are not really making things any worse.
*
* Ideally, we would locate the existing long-holder (i.e. the zfsvfs_t or
* zvol_state_t), and use their mechanism to prevent their hold from being
* dropped (e.g. VFS_HOLD()). However, that would be even more pain for
* very little gain.
*
* if cookiep == NULL, this does both the suspend & resume.
* Otherwise, it returns with the dataset "long held", and the cookie
* should be passed into zil_resume().
*/
int
zil_suspend(const char *osname, void **cookiep)
{
objset_t *os;
zilog_t *zilog;
const zil_header_t *zh;
int error;
error = dmu_objset_hold(osname, suspend_tag, &os);
if (error != 0)
return (error);
zilog = dmu_objset_zil(os);
mutex_enter(&zilog->zl_lock);
zh = zilog->zl_header;
if (zh->zh_flags & ZIL_REPLAY_NEEDED) { /* unplayed log */
mutex_exit(&zilog->zl_lock);
dmu_objset_rele(os, suspend_tag);
return (SET_ERROR(EBUSY));
}
/*
* Don't put a long hold in the cases where we can avoid it. This
* is when there is no cookie so we are doing a suspend & resume
* (i.e. called from zil_vdev_offline()), and there's nothing to do
* for the suspend because it's already suspended, or there's no ZIL.
*/
if (cookiep == NULL && !zilog->zl_suspending &&
(zilog->zl_suspend > 0 || BP_IS_HOLE(&zh->zh_log))) {
mutex_exit(&zilog->zl_lock);
dmu_objset_rele(os, suspend_tag);
return (0);
}
dsl_dataset_long_hold(dmu_objset_ds(os), suspend_tag);
dsl_pool_rele(dmu_objset_pool(os), suspend_tag);
zilog->zl_suspend++;
if (zilog->zl_suspend > 1) {
/*
* Someone else is already suspending it.
* Just wait for them to finish.
*/
while (zilog->zl_suspending)
cv_wait(&zilog->zl_cv_suspend, &zilog->zl_lock);
mutex_exit(&zilog->zl_lock);
if (cookiep == NULL)
zil_resume(os);
else
*cookiep = os;
return (0);
}
/*
* If there is no pointer to an on-disk block, this ZIL must not
* be active (e.g. filesystem not mounted), so there's nothing
* to clean up.
*/
if (BP_IS_HOLE(&zh->zh_log)) {
ASSERT(cookiep != NULL); /* fast path already handled */
*cookiep = os;
mutex_exit(&zilog->zl_lock);
return (0);
}
zilog->zl_suspending = B_TRUE;
mutex_exit(&zilog->zl_lock);
zil_commit(zilog, 0);
zil_destroy(zilog, B_FALSE);
mutex_enter(&zilog->zl_lock);
zilog->zl_suspending = B_FALSE;
cv_broadcast(&zilog->zl_cv_suspend);
mutex_exit(&zilog->zl_lock);
if (cookiep == NULL)
zil_resume(os);
else
*cookiep = os;
return (0);
}
void
zil_resume(void *cookie)
{
objset_t *os = cookie;
zilog_t *zilog = dmu_objset_zil(os);
mutex_enter(&zilog->zl_lock);
ASSERT(zilog->zl_suspend != 0);
zilog->zl_suspend--;
mutex_exit(&zilog->zl_lock);
dsl_dataset_long_rele(dmu_objset_ds(os), suspend_tag);
dsl_dataset_rele(dmu_objset_ds(os), suspend_tag);
}
typedef struct zil_replay_arg {
zil_replay_func_t *zr_replay;
void *zr_arg;
boolean_t zr_byteswap;
char *zr_lr;
} zil_replay_arg_t;
static int
zil_replay_error(zilog_t *zilog, lr_t *lr, int error)
{
char name[MAXNAMELEN];
zilog->zl_replaying_seq--; /* didn't actually replay this one */
dmu_objset_name(zilog->zl_os, name);
cmn_err(CE_WARN, "ZFS replay transaction error %d, "
"dataset %s, seq 0x%llx, txtype %llu %s\n", error, name,
(u_longlong_t)lr->lrc_seq,
(u_longlong_t)(lr->lrc_txtype & ~TX_CI),
(lr->lrc_txtype & TX_CI) ? "CI" : "");
return (error);
}
static int
zil_replay_log_record(zilog_t *zilog, lr_t *lr, void *zra, uint64_t claim_txg)
{
zil_replay_arg_t *zr = zra;
const zil_header_t *zh = zilog->zl_header;
uint64_t reclen = lr->lrc_reclen;
uint64_t txtype = lr->lrc_txtype;
int error = 0;
zilog->zl_replaying_seq = lr->lrc_seq;
if (lr->lrc_seq <= zh->zh_replay_seq) /* already replayed */
return (0);
if (lr->lrc_txg < claim_txg) /* already committed */
return (0);
/* Strip case-insensitive bit, still present in log record */
txtype &= ~TX_CI;
if (txtype == 0 || txtype >= TX_MAX_TYPE)
return (zil_replay_error(zilog, lr, EINVAL));
/*
* If this record type can be logged out of order, the object
* (lr_foid) may no longer exist. That's legitimate, not an error.
*/
if (TX_OOO(txtype)) {
error = dmu_object_info(zilog->zl_os,
((lr_ooo_t *)lr)->lr_foid, NULL);
if (error == ENOENT || error == EEXIST)
return (0);
}
/*
* Make a copy of the data so we can revise and extend it.
*/
bcopy(lr, zr->zr_lr, reclen);
/*
* If this is a TX_WRITE with a blkptr, suck in the data.
*/
if (txtype == TX_WRITE && reclen == sizeof (lr_write_t)) {
error = zil_read_log_data(zilog, (lr_write_t *)lr,
zr->zr_lr + reclen);
if (error != 0)
return (zil_replay_error(zilog, lr, error));
}
/*
* The log block containing this lr may have been byteswapped
* so that we can easily examine common fields like lrc_txtype.
* However, the log is a mix of different record types, and only the
* replay vectors know how to byteswap their records. Therefore, if
* the lr was byteswapped, undo it before invoking the replay vector.
*/
if (zr->zr_byteswap)
byteswap_uint64_array(zr->zr_lr, reclen);
/*
* We must now do two things atomically: replay this log record,
* and update the log header sequence number to reflect the fact that
* we did so. At the end of each replay function the sequence number
* is updated if we are in replay mode.
*/
error = zr->zr_replay[txtype](zr->zr_arg, zr->zr_lr, zr->zr_byteswap);
if (error != 0) {
/*
* The DMU's dnode layer doesn't see removes until the txg
* commits, so a subsequent claim can spuriously fail with
* EEXIST. So if we receive any error we try syncing out
* any removes then retry the transaction. Note that we
* specify B_FALSE for byteswap now, so we don't do it twice.
*/
txg_wait_synced(spa_get_dsl(zilog->zl_spa), 0);
error = zr->zr_replay[txtype](zr->zr_arg, zr->zr_lr, B_FALSE);
if (error != 0)
return (zil_replay_error(zilog, lr, error));
}
return (0);
}
/* ARGSUSED */
static int
zil_incr_blks(zilog_t *zilog, blkptr_t *bp, void *arg, uint64_t claim_txg)
{
zilog->zl_replay_blks++;
return (0);
}
/*
* If this dataset has a non-empty intent log, replay it and destroy it.
*/
void
zil_replay(objset_t *os, void *arg, zil_replay_func_t replay_func[TX_MAX_TYPE])
{
zilog_t *zilog = dmu_objset_zil(os);
const zil_header_t *zh = zilog->zl_header;
zil_replay_arg_t zr;
if ((zh->zh_flags & ZIL_REPLAY_NEEDED) == 0) {
zil_destroy(zilog, B_TRUE);
return;
}
zr.zr_replay = replay_func;
zr.zr_arg = arg;
zr.zr_byteswap = BP_SHOULD_BYTESWAP(&zh->zh_log);
zr.zr_lr = vmem_alloc(2 * SPA_MAXBLOCKSIZE, KM_SLEEP);
/*
* Wait for in-progress removes to sync before starting replay.
*/
txg_wait_synced(zilog->zl_dmu_pool, 0);
zilog->zl_replay = B_TRUE;
zilog->zl_replay_time = ddi_get_lbolt();
ASSERT(zilog->zl_replay_blks == 0);
(void) zil_parse(zilog, zil_incr_blks, zil_replay_log_record, &zr,
zh->zh_claim_txg);
vmem_free(zr.zr_lr, 2 * SPA_MAXBLOCKSIZE);
zil_destroy(zilog, B_FALSE);
txg_wait_synced(zilog->zl_dmu_pool, zilog->zl_destroy_txg);
zilog->zl_replay = B_FALSE;
}
boolean_t
zil_replaying(zilog_t *zilog, dmu_tx_t *tx)
{
if (zilog->zl_sync == ZFS_SYNC_DISABLED)
return (B_TRUE);
if (zilog->zl_replay) {
dsl_dataset_dirty(dmu_objset_ds(zilog->zl_os), tx);
zilog->zl_replayed_seq[dmu_tx_get_txg(tx) & TXG_MASK] =
zilog->zl_replaying_seq;
return (B_TRUE);
}
return (B_FALSE);
}
/* ARGSUSED */
int
zil_vdev_offline(const char *osname, void *arg)
{
int error;
error = zil_suspend(osname, NULL);
if (error != 0)
return (SET_ERROR(EEXIST));
return (0);
}
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(zil_alloc);
EXPORT_SYMBOL(zil_free);
EXPORT_SYMBOL(zil_open);
EXPORT_SYMBOL(zil_close);
EXPORT_SYMBOL(zil_replay);
EXPORT_SYMBOL(zil_replaying);
EXPORT_SYMBOL(zil_destroy);
EXPORT_SYMBOL(zil_destroy_sync);
EXPORT_SYMBOL(zil_itx_create);
EXPORT_SYMBOL(zil_itx_destroy);
EXPORT_SYMBOL(zil_itx_assign);
EXPORT_SYMBOL(zil_commit);
EXPORT_SYMBOL(zil_vdev_offline);
EXPORT_SYMBOL(zil_claim);
EXPORT_SYMBOL(zil_check_log_chain);
EXPORT_SYMBOL(zil_sync);
EXPORT_SYMBOL(zil_clean);
EXPORT_SYMBOL(zil_suspend);
EXPORT_SYMBOL(zil_resume);
EXPORT_SYMBOL(zil_add_block);
EXPORT_SYMBOL(zil_bp_tree_add);
EXPORT_SYMBOL(zil_set_sync);
EXPORT_SYMBOL(zil_set_logbias);
module_param(zil_replay_disable, int, 0644);
MODULE_PARM_DESC(zil_replay_disable, "Disable intent logging replay");
module_param(zfs_nocacheflush, int, 0644);
MODULE_PARM_DESC(zfs_nocacheflush, "Disable cache flushes");
module_param(zil_slog_limit, ulong, 0644);
MODULE_PARM_DESC(zil_slog_limit, "Max commit bytes to separate log device");
#endif
Reference in New Issue View Git Blame Copy Permalink