mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-27 19:39:35 +03:00
5caeef02fa
This feature allows disks to be added one at a time to a RAID-Z group, expanding its capacity incrementally. This feature is especially useful for small pools (typically with only one RAID-Z group), where there isn't sufficient hardware to add capacity by adding a whole new RAID-Z group (typically doubling the number of disks). == Initiating expansion == A new device (disk) can be attached to an existing RAIDZ vdev, by running `zpool attach POOL raidzP-N NEW_DEVICE`, e.g. `zpool attach tank raidz2-0 sda`. The new device will become part of the RAIDZ group. A "raidz expansion" will be initiated, and the new device will contribute additional space to the RAIDZ group once the expansion completes. The `feature@raidz_expansion` on-disk feature flag must be `enabled` to initiate an expansion, and it remains `active` for the life of the pool. In other words, pools with expanded RAIDZ vdevs can not be imported by older releases of the ZFS software. == During expansion == The expansion entails reading all allocated space from existing disks in the RAIDZ group, and rewriting it to the new disks in the RAIDZ group (including the newly added device). The expansion progress can be monitored with `zpool status`. Data redundancy is maintained during (and after) the expansion. If a disk fails while the expansion is in progress, the expansion pauses until the health of the RAIDZ vdev is restored (e.g. by replacing the failed disk and waiting for reconstruction to complete). The pool remains accessible during expansion. Following a reboot or export/import, the expansion resumes where it left off. == After expansion == When the expansion completes, the additional space is available for use, and is reflected in the `available` zfs property (as seen in `zfs list`, `df`, etc). Expansion does not change the number of failures that can be tolerated without data loss (e.g. a RAIDZ2 is still a RAIDZ2 even after expansion). A RAIDZ vdev can be expanded multiple times. After the expansion completes, old blocks remain with their old data-to-parity ratio (e.g. 5-wide RAIDZ2, has 3 data to 2 parity), but distributed among the larger set of disks. New blocks will be written with the new data-to-parity ratio (e.g. a 5-wide RAIDZ2 which has been expanded once to 6-wide, has 4 data to 2 parity). However, the RAIDZ vdev's "assumed parity ratio" does not change, so slightly less space than is expected may be reported for newly-written blocks, according to `zfs list`, `df`, `ls -s`, and similar tools. Sponsored-by: The FreeBSD Foundation Sponsored-by: iXsystems, Inc. Sponsored-by: vStack Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Authored-by: Matthew Ahrens <mahrens@delphix.com> Contributions-by: Fedor Uporov <fuporov.vstack@gmail.com> Contributions-by: Stuart Maybee <stuart.maybee@comcast.net> Contributions-by: Thorsten Behrens <tbehrens@outlook.com> Contributions-by: Fmstrat <nospam@nowsci.com> Contributions-by: Don Brady <dev.fs.zfs@gmail.com> Signed-off-by: Don Brady <dev.fs.zfs@gmail.com> Closes #15022
829 lines
24 KiB
C
829 lines
24 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or https://opensource.org/licenses/CDDL-1.0.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2016, 2019 by Delphix. All rights reserved.
|
|
*/
|
|
|
|
#include <sys/spa.h>
|
|
#include <sys/spa_impl.h>
|
|
#include <sys/txg.h>
|
|
#include <sys/vdev_impl.h>
|
|
#include <sys/metaslab_impl.h>
|
|
#include <sys/dsl_synctask.h>
|
|
#include <sys/zap.h>
|
|
#include <sys/dmu_tx.h>
|
|
#include <sys/vdev_initialize.h>
|
|
|
|
/*
|
|
* Value that is written to disk during initialization.
|
|
*/
|
|
static uint64_t zfs_initialize_value = 0xdeadbeefdeadbeeeULL;
|
|
|
|
/* maximum number of I/Os outstanding per leaf vdev */
|
|
static const int zfs_initialize_limit = 1;
|
|
|
|
/* size of initializing writes; default 1MiB, see zfs_remove_max_segment */
|
|
static uint64_t zfs_initialize_chunk_size = 1024 * 1024;
|
|
|
|
static boolean_t
|
|
vdev_initialize_should_stop(vdev_t *vd)
|
|
{
|
|
return (vd->vdev_initialize_exit_wanted || !vdev_writeable(vd) ||
|
|
vd->vdev_detached || vd->vdev_top->vdev_removing ||
|
|
vd->vdev_top->vdev_rz_expanding);
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_zap_update_sync(void *arg, dmu_tx_t *tx)
|
|
{
|
|
/*
|
|
* We pass in the guid instead of the vdev_t since the vdev may
|
|
* have been freed prior to the sync task being processed. This
|
|
* happens when a vdev is detached as we call spa_config_vdev_exit(),
|
|
* stop the initializing thread, schedule the sync task, and free
|
|
* the vdev. Later when the scheduled sync task is invoked, it would
|
|
* find that the vdev has been freed.
|
|
*/
|
|
uint64_t guid = *(uint64_t *)arg;
|
|
uint64_t txg = dmu_tx_get_txg(tx);
|
|
kmem_free(arg, sizeof (uint64_t));
|
|
|
|
vdev_t *vd = spa_lookup_by_guid(tx->tx_pool->dp_spa, guid, B_FALSE);
|
|
if (vd == NULL || vd->vdev_top->vdev_removing ||
|
|
!vdev_is_concrete(vd) || vd->vdev_top->vdev_rz_expanding)
|
|
return;
|
|
|
|
uint64_t last_offset = vd->vdev_initialize_offset[txg & TXG_MASK];
|
|
vd->vdev_initialize_offset[txg & TXG_MASK] = 0;
|
|
|
|
VERIFY(vd->vdev_leaf_zap != 0);
|
|
|
|
objset_t *mos = vd->vdev_spa->spa_meta_objset;
|
|
|
|
if (last_offset > 0) {
|
|
vd->vdev_initialize_last_offset = last_offset;
|
|
VERIFY0(zap_update(mos, vd->vdev_leaf_zap,
|
|
VDEV_LEAF_ZAP_INITIALIZE_LAST_OFFSET,
|
|
sizeof (last_offset), 1, &last_offset, tx));
|
|
}
|
|
if (vd->vdev_initialize_action_time > 0) {
|
|
uint64_t val = (uint64_t)vd->vdev_initialize_action_time;
|
|
VERIFY0(zap_update(mos, vd->vdev_leaf_zap,
|
|
VDEV_LEAF_ZAP_INITIALIZE_ACTION_TIME, sizeof (val),
|
|
1, &val, tx));
|
|
}
|
|
|
|
uint64_t initialize_state = vd->vdev_initialize_state;
|
|
VERIFY0(zap_update(mos, vd->vdev_leaf_zap,
|
|
VDEV_LEAF_ZAP_INITIALIZE_STATE, sizeof (initialize_state), 1,
|
|
&initialize_state, tx));
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_zap_remove_sync(void *arg, dmu_tx_t *tx)
|
|
{
|
|
uint64_t guid = *(uint64_t *)arg;
|
|
|
|
kmem_free(arg, sizeof (uint64_t));
|
|
|
|
vdev_t *vd = spa_lookup_by_guid(tx->tx_pool->dp_spa, guid, B_FALSE);
|
|
if (vd == NULL || vd->vdev_top->vdev_removing || !vdev_is_concrete(vd))
|
|
return;
|
|
|
|
ASSERT3S(vd->vdev_initialize_state, ==, VDEV_INITIALIZE_NONE);
|
|
ASSERT3U(vd->vdev_leaf_zap, !=, 0);
|
|
|
|
vd->vdev_initialize_last_offset = 0;
|
|
vd->vdev_initialize_action_time = 0;
|
|
|
|
objset_t *mos = vd->vdev_spa->spa_meta_objset;
|
|
int error;
|
|
|
|
error = zap_remove(mos, vd->vdev_leaf_zap,
|
|
VDEV_LEAF_ZAP_INITIALIZE_LAST_OFFSET, tx);
|
|
VERIFY(error == 0 || error == ENOENT);
|
|
|
|
error = zap_remove(mos, vd->vdev_leaf_zap,
|
|
VDEV_LEAF_ZAP_INITIALIZE_STATE, tx);
|
|
VERIFY(error == 0 || error == ENOENT);
|
|
|
|
error = zap_remove(mos, vd->vdev_leaf_zap,
|
|
VDEV_LEAF_ZAP_INITIALIZE_ACTION_TIME, tx);
|
|
VERIFY(error == 0 || error == ENOENT);
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_change_state(vdev_t *vd, vdev_initializing_state_t new_state)
|
|
{
|
|
ASSERT(MUTEX_HELD(&vd->vdev_initialize_lock));
|
|
spa_t *spa = vd->vdev_spa;
|
|
|
|
if (new_state == vd->vdev_initialize_state)
|
|
return;
|
|
|
|
/*
|
|
* Copy the vd's guid, this will be freed by the sync task.
|
|
*/
|
|
uint64_t *guid = kmem_zalloc(sizeof (uint64_t), KM_SLEEP);
|
|
*guid = vd->vdev_guid;
|
|
|
|
/*
|
|
* If we're suspending, then preserving the original start time.
|
|
*/
|
|
if (vd->vdev_initialize_state != VDEV_INITIALIZE_SUSPENDED) {
|
|
vd->vdev_initialize_action_time = gethrestime_sec();
|
|
}
|
|
|
|
vdev_initializing_state_t old_state = vd->vdev_initialize_state;
|
|
vd->vdev_initialize_state = new_state;
|
|
|
|
dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
|
|
VERIFY0(dmu_tx_assign(tx, TXG_WAIT));
|
|
|
|
if (new_state != VDEV_INITIALIZE_NONE) {
|
|
dsl_sync_task_nowait(spa_get_dsl(spa),
|
|
vdev_initialize_zap_update_sync, guid, tx);
|
|
} else {
|
|
dsl_sync_task_nowait(spa_get_dsl(spa),
|
|
vdev_initialize_zap_remove_sync, guid, tx);
|
|
}
|
|
|
|
switch (new_state) {
|
|
case VDEV_INITIALIZE_ACTIVE:
|
|
spa_history_log_internal(spa, "initialize", tx,
|
|
"vdev=%s activated", vd->vdev_path);
|
|
break;
|
|
case VDEV_INITIALIZE_SUSPENDED:
|
|
spa_history_log_internal(spa, "initialize", tx,
|
|
"vdev=%s suspended", vd->vdev_path);
|
|
break;
|
|
case VDEV_INITIALIZE_CANCELED:
|
|
if (old_state == VDEV_INITIALIZE_ACTIVE ||
|
|
old_state == VDEV_INITIALIZE_SUSPENDED)
|
|
spa_history_log_internal(spa, "initialize", tx,
|
|
"vdev=%s canceled", vd->vdev_path);
|
|
break;
|
|
case VDEV_INITIALIZE_COMPLETE:
|
|
spa_history_log_internal(spa, "initialize", tx,
|
|
"vdev=%s complete", vd->vdev_path);
|
|
break;
|
|
case VDEV_INITIALIZE_NONE:
|
|
spa_history_log_internal(spa, "uninitialize", tx,
|
|
"vdev=%s", vd->vdev_path);
|
|
break;
|
|
default:
|
|
panic("invalid state %llu", (unsigned long long)new_state);
|
|
}
|
|
|
|
dmu_tx_commit(tx);
|
|
|
|
if (new_state != VDEV_INITIALIZE_ACTIVE)
|
|
spa_notify_waiters(spa);
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_cb(zio_t *zio)
|
|
{
|
|
vdev_t *vd = zio->io_vd;
|
|
mutex_enter(&vd->vdev_initialize_io_lock);
|
|
if (zio->io_error == ENXIO && !vdev_writeable(vd)) {
|
|
/*
|
|
* The I/O failed because the vdev was unavailable; roll the
|
|
* last offset back. (This works because spa_sync waits on
|
|
* spa_txg_zio before it runs sync tasks.)
|
|
*/
|
|
uint64_t *off =
|
|
&vd->vdev_initialize_offset[zio->io_txg & TXG_MASK];
|
|
*off = MIN(*off, zio->io_offset);
|
|
} else {
|
|
/*
|
|
* Since initializing is best-effort, we ignore I/O errors and
|
|
* rely on vdev_probe to determine if the errors are more
|
|
* critical.
|
|
*/
|
|
if (zio->io_error != 0)
|
|
vd->vdev_stat.vs_initialize_errors++;
|
|
|
|
vd->vdev_initialize_bytes_done += zio->io_orig_size;
|
|
}
|
|
ASSERT3U(vd->vdev_initialize_inflight, >, 0);
|
|
vd->vdev_initialize_inflight--;
|
|
cv_broadcast(&vd->vdev_initialize_io_cv);
|
|
mutex_exit(&vd->vdev_initialize_io_lock);
|
|
|
|
spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd);
|
|
}
|
|
|
|
/* Takes care of physical writing and limiting # of concurrent ZIOs. */
|
|
static int
|
|
vdev_initialize_write(vdev_t *vd, uint64_t start, uint64_t size, abd_t *data)
|
|
{
|
|
spa_t *spa = vd->vdev_spa;
|
|
|
|
/* Limit inflight initializing I/Os */
|
|
mutex_enter(&vd->vdev_initialize_io_lock);
|
|
while (vd->vdev_initialize_inflight >= zfs_initialize_limit) {
|
|
cv_wait(&vd->vdev_initialize_io_cv,
|
|
&vd->vdev_initialize_io_lock);
|
|
}
|
|
vd->vdev_initialize_inflight++;
|
|
mutex_exit(&vd->vdev_initialize_io_lock);
|
|
|
|
dmu_tx_t *tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
|
|
VERIFY0(dmu_tx_assign(tx, TXG_WAIT));
|
|
uint64_t txg = dmu_tx_get_txg(tx);
|
|
|
|
spa_config_enter(spa, SCL_STATE_ALL, vd, RW_READER);
|
|
mutex_enter(&vd->vdev_initialize_lock);
|
|
|
|
if (vd->vdev_initialize_offset[txg & TXG_MASK] == 0) {
|
|
uint64_t *guid = kmem_zalloc(sizeof (uint64_t), KM_SLEEP);
|
|
*guid = vd->vdev_guid;
|
|
|
|
/* This is the first write of this txg. */
|
|
dsl_sync_task_nowait(spa_get_dsl(spa),
|
|
vdev_initialize_zap_update_sync, guid, tx);
|
|
}
|
|
|
|
/*
|
|
* We know the vdev struct will still be around since all
|
|
* consumers of vdev_free must stop the initialization first.
|
|
*/
|
|
if (vdev_initialize_should_stop(vd)) {
|
|
mutex_enter(&vd->vdev_initialize_io_lock);
|
|
ASSERT3U(vd->vdev_initialize_inflight, >, 0);
|
|
vd->vdev_initialize_inflight--;
|
|
mutex_exit(&vd->vdev_initialize_io_lock);
|
|
spa_config_exit(vd->vdev_spa, SCL_STATE_ALL, vd);
|
|
mutex_exit(&vd->vdev_initialize_lock);
|
|
dmu_tx_commit(tx);
|
|
return (SET_ERROR(EINTR));
|
|
}
|
|
mutex_exit(&vd->vdev_initialize_lock);
|
|
|
|
vd->vdev_initialize_offset[txg & TXG_MASK] = start + size;
|
|
zio_nowait(zio_write_phys(spa->spa_txg_zio[txg & TXG_MASK], vd, start,
|
|
size, data, ZIO_CHECKSUM_OFF, vdev_initialize_cb, NULL,
|
|
ZIO_PRIORITY_INITIALIZING, ZIO_FLAG_CANFAIL, B_FALSE));
|
|
/* vdev_initialize_cb releases SCL_STATE_ALL */
|
|
|
|
dmu_tx_commit(tx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Callback to fill each ABD chunk with zfs_initialize_value. len must be
|
|
* divisible by sizeof (uint64_t), and buf must be 8-byte aligned. The ABD
|
|
* allocation will guarantee these for us.
|
|
*/
|
|
static int
|
|
vdev_initialize_block_fill(void *buf, size_t len, void *unused)
|
|
{
|
|
(void) unused;
|
|
|
|
ASSERT0(len % sizeof (uint64_t));
|
|
for (uint64_t i = 0; i < len; i += sizeof (uint64_t)) {
|
|
*(uint64_t *)((char *)(buf) + i) = zfs_initialize_value;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static abd_t *
|
|
vdev_initialize_block_alloc(void)
|
|
{
|
|
/* Allocate ABD for filler data */
|
|
abd_t *data = abd_alloc_for_io(zfs_initialize_chunk_size, B_FALSE);
|
|
|
|
ASSERT0(zfs_initialize_chunk_size % sizeof (uint64_t));
|
|
(void) abd_iterate_func(data, 0, zfs_initialize_chunk_size,
|
|
vdev_initialize_block_fill, NULL);
|
|
|
|
return (data);
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_block_free(abd_t *data)
|
|
{
|
|
abd_free(data);
|
|
}
|
|
|
|
static int
|
|
vdev_initialize_ranges(vdev_t *vd, abd_t *data)
|
|
{
|
|
range_tree_t *rt = vd->vdev_initialize_tree;
|
|
zfs_btree_t *bt = &rt->rt_root;
|
|
zfs_btree_index_t where;
|
|
|
|
for (range_seg_t *rs = zfs_btree_first(bt, &where); rs != NULL;
|
|
rs = zfs_btree_next(bt, &where, &where)) {
|
|
uint64_t size = rs_get_end(rs, rt) - rs_get_start(rs, rt);
|
|
|
|
/* Split range into legally-sized physical chunks */
|
|
uint64_t writes_required =
|
|
((size - 1) / zfs_initialize_chunk_size) + 1;
|
|
|
|
for (uint64_t w = 0; w < writes_required; w++) {
|
|
int error;
|
|
|
|
error = vdev_initialize_write(vd,
|
|
VDEV_LABEL_START_SIZE + rs_get_start(rs, rt) +
|
|
(w * zfs_initialize_chunk_size),
|
|
MIN(size - (w * zfs_initialize_chunk_size),
|
|
zfs_initialize_chunk_size), data);
|
|
if (error != 0)
|
|
return (error);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_xlate_last_rs_end(void *arg, range_seg64_t *physical_rs)
|
|
{
|
|
uint64_t *last_rs_end = (uint64_t *)arg;
|
|
|
|
if (physical_rs->rs_end > *last_rs_end)
|
|
*last_rs_end = physical_rs->rs_end;
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_xlate_progress(void *arg, range_seg64_t *physical_rs)
|
|
{
|
|
vdev_t *vd = (vdev_t *)arg;
|
|
|
|
uint64_t size = physical_rs->rs_end - physical_rs->rs_start;
|
|
vd->vdev_initialize_bytes_est += size;
|
|
|
|
if (vd->vdev_initialize_last_offset > physical_rs->rs_end) {
|
|
vd->vdev_initialize_bytes_done += size;
|
|
} else if (vd->vdev_initialize_last_offset > physical_rs->rs_start &&
|
|
vd->vdev_initialize_last_offset < physical_rs->rs_end) {
|
|
vd->vdev_initialize_bytes_done +=
|
|
vd->vdev_initialize_last_offset - physical_rs->rs_start;
|
|
}
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_calculate_progress(vdev_t *vd)
|
|
{
|
|
ASSERT(spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_READER) ||
|
|
spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_WRITER));
|
|
ASSERT(vd->vdev_leaf_zap != 0);
|
|
|
|
vd->vdev_initialize_bytes_est = 0;
|
|
vd->vdev_initialize_bytes_done = 0;
|
|
|
|
for (uint64_t i = 0; i < vd->vdev_top->vdev_ms_count; i++) {
|
|
metaslab_t *msp = vd->vdev_top->vdev_ms[i];
|
|
mutex_enter(&msp->ms_lock);
|
|
|
|
uint64_t ms_free = (msp->ms_size -
|
|
metaslab_allocated_space(msp)) /
|
|
vdev_get_ndisks(vd->vdev_top);
|
|
|
|
/*
|
|
* Convert the metaslab range to a physical range
|
|
* on our vdev. We use this to determine if we are
|
|
* in the middle of this metaslab range.
|
|
*/
|
|
range_seg64_t logical_rs, physical_rs, remain_rs;
|
|
logical_rs.rs_start = msp->ms_start;
|
|
logical_rs.rs_end = msp->ms_start + msp->ms_size;
|
|
|
|
/* Metaslab space after this offset has not been initialized */
|
|
vdev_xlate(vd, &logical_rs, &physical_rs, &remain_rs);
|
|
if (vd->vdev_initialize_last_offset <= physical_rs.rs_start) {
|
|
vd->vdev_initialize_bytes_est += ms_free;
|
|
mutex_exit(&msp->ms_lock);
|
|
continue;
|
|
}
|
|
|
|
/* Metaslab space before this offset has been initialized */
|
|
uint64_t last_rs_end = physical_rs.rs_end;
|
|
if (!vdev_xlate_is_empty(&remain_rs)) {
|
|
vdev_xlate_walk(vd, &remain_rs,
|
|
vdev_initialize_xlate_last_rs_end, &last_rs_end);
|
|
}
|
|
|
|
if (vd->vdev_initialize_last_offset > last_rs_end) {
|
|
vd->vdev_initialize_bytes_done += ms_free;
|
|
vd->vdev_initialize_bytes_est += ms_free;
|
|
mutex_exit(&msp->ms_lock);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If we get here, we're in the middle of initializing this
|
|
* metaslab. Load it and walk the free tree for more accurate
|
|
* progress estimation.
|
|
*/
|
|
VERIFY0(metaslab_load(msp));
|
|
|
|
zfs_btree_index_t where;
|
|
range_tree_t *rt = msp->ms_allocatable;
|
|
for (range_seg_t *rs =
|
|
zfs_btree_first(&rt->rt_root, &where); rs;
|
|
rs = zfs_btree_next(&rt->rt_root, &where,
|
|
&where)) {
|
|
logical_rs.rs_start = rs_get_start(rs, rt);
|
|
logical_rs.rs_end = rs_get_end(rs, rt);
|
|
|
|
vdev_xlate_walk(vd, &logical_rs,
|
|
vdev_initialize_xlate_progress, vd);
|
|
}
|
|
mutex_exit(&msp->ms_lock);
|
|
}
|
|
}
|
|
|
|
static int
|
|
vdev_initialize_load(vdev_t *vd)
|
|
{
|
|
int err = 0;
|
|
ASSERT(spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_READER) ||
|
|
spa_config_held(vd->vdev_spa, SCL_CONFIG, RW_WRITER));
|
|
ASSERT(vd->vdev_leaf_zap != 0);
|
|
|
|
if (vd->vdev_initialize_state == VDEV_INITIALIZE_ACTIVE ||
|
|
vd->vdev_initialize_state == VDEV_INITIALIZE_SUSPENDED) {
|
|
err = zap_lookup(vd->vdev_spa->spa_meta_objset,
|
|
vd->vdev_leaf_zap, VDEV_LEAF_ZAP_INITIALIZE_LAST_OFFSET,
|
|
sizeof (vd->vdev_initialize_last_offset), 1,
|
|
&vd->vdev_initialize_last_offset);
|
|
if (err == ENOENT) {
|
|
vd->vdev_initialize_last_offset = 0;
|
|
err = 0;
|
|
}
|
|
}
|
|
|
|
vdev_initialize_calculate_progress(vd);
|
|
return (err);
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_xlate_range_add(void *arg, range_seg64_t *physical_rs)
|
|
{
|
|
vdev_t *vd = arg;
|
|
|
|
/* Only add segments that we have not visited yet */
|
|
if (physical_rs->rs_end <= vd->vdev_initialize_last_offset)
|
|
return;
|
|
|
|
/* Pick up where we left off mid-range. */
|
|
if (vd->vdev_initialize_last_offset > physical_rs->rs_start) {
|
|
zfs_dbgmsg("range write: vd %s changed (%llu, %llu) to "
|
|
"(%llu, %llu)", vd->vdev_path,
|
|
(u_longlong_t)physical_rs->rs_start,
|
|
(u_longlong_t)physical_rs->rs_end,
|
|
(u_longlong_t)vd->vdev_initialize_last_offset,
|
|
(u_longlong_t)physical_rs->rs_end);
|
|
ASSERT3U(physical_rs->rs_end, >,
|
|
vd->vdev_initialize_last_offset);
|
|
physical_rs->rs_start = vd->vdev_initialize_last_offset;
|
|
}
|
|
|
|
ASSERT3U(physical_rs->rs_end, >, physical_rs->rs_start);
|
|
|
|
range_tree_add(vd->vdev_initialize_tree, physical_rs->rs_start,
|
|
physical_rs->rs_end - physical_rs->rs_start);
|
|
}
|
|
|
|
/*
|
|
* Convert the logical range into a physical range and add it to our
|
|
* avl tree.
|
|
*/
|
|
static void
|
|
vdev_initialize_range_add(void *arg, uint64_t start, uint64_t size)
|
|
{
|
|
vdev_t *vd = arg;
|
|
range_seg64_t logical_rs;
|
|
logical_rs.rs_start = start;
|
|
logical_rs.rs_end = start + size;
|
|
|
|
ASSERT(vd->vdev_ops->vdev_op_leaf);
|
|
vdev_xlate_walk(vd, &logical_rs, vdev_initialize_xlate_range_add, arg);
|
|
}
|
|
|
|
static __attribute__((noreturn)) void
|
|
vdev_initialize_thread(void *arg)
|
|
{
|
|
vdev_t *vd = arg;
|
|
spa_t *spa = vd->vdev_spa;
|
|
int error = 0;
|
|
uint64_t ms_count = 0;
|
|
|
|
ASSERT(vdev_is_concrete(vd));
|
|
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
|
|
|
|
vd->vdev_initialize_last_offset = 0;
|
|
VERIFY0(vdev_initialize_load(vd));
|
|
|
|
abd_t *deadbeef = vdev_initialize_block_alloc();
|
|
|
|
vd->vdev_initialize_tree = range_tree_create(NULL, RANGE_SEG64, NULL,
|
|
0, 0);
|
|
|
|
for (uint64_t i = 0; !vd->vdev_detached &&
|
|
i < vd->vdev_top->vdev_ms_count; i++) {
|
|
metaslab_t *msp = vd->vdev_top->vdev_ms[i];
|
|
boolean_t unload_when_done = B_FALSE;
|
|
|
|
/*
|
|
* If we've expanded the top-level vdev or it's our
|
|
* first pass, calculate our progress.
|
|
*/
|
|
if (vd->vdev_top->vdev_ms_count != ms_count) {
|
|
vdev_initialize_calculate_progress(vd);
|
|
ms_count = vd->vdev_top->vdev_ms_count;
|
|
}
|
|
|
|
spa_config_exit(spa, SCL_CONFIG, FTAG);
|
|
metaslab_disable(msp);
|
|
mutex_enter(&msp->ms_lock);
|
|
if (!msp->ms_loaded && !msp->ms_loading)
|
|
unload_when_done = B_TRUE;
|
|
VERIFY0(metaslab_load(msp));
|
|
|
|
range_tree_walk(msp->ms_allocatable, vdev_initialize_range_add,
|
|
vd);
|
|
mutex_exit(&msp->ms_lock);
|
|
|
|
error = vdev_initialize_ranges(vd, deadbeef);
|
|
metaslab_enable(msp, B_TRUE, unload_when_done);
|
|
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
|
|
|
|
range_tree_vacate(vd->vdev_initialize_tree, NULL, NULL);
|
|
if (error != 0)
|
|
break;
|
|
}
|
|
|
|
spa_config_exit(spa, SCL_CONFIG, FTAG);
|
|
mutex_enter(&vd->vdev_initialize_io_lock);
|
|
while (vd->vdev_initialize_inflight > 0) {
|
|
cv_wait(&vd->vdev_initialize_io_cv,
|
|
&vd->vdev_initialize_io_lock);
|
|
}
|
|
mutex_exit(&vd->vdev_initialize_io_lock);
|
|
|
|
range_tree_destroy(vd->vdev_initialize_tree);
|
|
vdev_initialize_block_free(deadbeef);
|
|
vd->vdev_initialize_tree = NULL;
|
|
|
|
mutex_enter(&vd->vdev_initialize_lock);
|
|
if (!vd->vdev_initialize_exit_wanted) {
|
|
if (vdev_writeable(vd)) {
|
|
vdev_initialize_change_state(vd,
|
|
VDEV_INITIALIZE_COMPLETE);
|
|
} else if (vd->vdev_faulted) {
|
|
vdev_initialize_change_state(vd,
|
|
VDEV_INITIALIZE_CANCELED);
|
|
}
|
|
}
|
|
ASSERT(vd->vdev_initialize_thread != NULL ||
|
|
vd->vdev_initialize_inflight == 0);
|
|
|
|
/*
|
|
* Drop the vdev_initialize_lock while we sync out the
|
|
* txg since it's possible that a device might be trying to
|
|
* come online and must check to see if it needs to restart an
|
|
* initialization. That thread will be holding the spa_config_lock
|
|
* which would prevent the txg_wait_synced from completing.
|
|
*/
|
|
mutex_exit(&vd->vdev_initialize_lock);
|
|
txg_wait_synced(spa_get_dsl(spa), 0);
|
|
mutex_enter(&vd->vdev_initialize_lock);
|
|
|
|
vd->vdev_initialize_thread = NULL;
|
|
cv_broadcast(&vd->vdev_initialize_cv);
|
|
mutex_exit(&vd->vdev_initialize_lock);
|
|
|
|
thread_exit();
|
|
}
|
|
|
|
/*
|
|
* Initiates a device. Caller must hold vdev_initialize_lock.
|
|
* Device must be a leaf and not already be initializing.
|
|
*/
|
|
void
|
|
vdev_initialize(vdev_t *vd)
|
|
{
|
|
ASSERT(MUTEX_HELD(&vd->vdev_initialize_lock));
|
|
ASSERT(vd->vdev_ops->vdev_op_leaf);
|
|
ASSERT(vdev_is_concrete(vd));
|
|
ASSERT3P(vd->vdev_initialize_thread, ==, NULL);
|
|
ASSERT(!vd->vdev_detached);
|
|
ASSERT(!vd->vdev_initialize_exit_wanted);
|
|
ASSERT(!vd->vdev_top->vdev_removing);
|
|
ASSERT(!vd->vdev_top->vdev_rz_expanding);
|
|
|
|
vdev_initialize_change_state(vd, VDEV_INITIALIZE_ACTIVE);
|
|
vd->vdev_initialize_thread = thread_create(NULL, 0,
|
|
vdev_initialize_thread, vd, 0, &p0, TS_RUN, maxclsyspri);
|
|
}
|
|
|
|
/*
|
|
* Uninitializes a device. Caller must hold vdev_initialize_lock.
|
|
* Device must be a leaf and not already be initializing.
|
|
*/
|
|
void
|
|
vdev_uninitialize(vdev_t *vd)
|
|
{
|
|
ASSERT(MUTEX_HELD(&vd->vdev_initialize_lock));
|
|
ASSERT(vd->vdev_ops->vdev_op_leaf);
|
|
ASSERT(vdev_is_concrete(vd));
|
|
ASSERT3P(vd->vdev_initialize_thread, ==, NULL);
|
|
ASSERT(!vd->vdev_detached);
|
|
ASSERT(!vd->vdev_initialize_exit_wanted);
|
|
ASSERT(!vd->vdev_top->vdev_removing);
|
|
|
|
vdev_initialize_change_state(vd, VDEV_INITIALIZE_NONE);
|
|
}
|
|
|
|
/*
|
|
* Wait for the initialize thread to be terminated (cancelled or stopped).
|
|
*/
|
|
static void
|
|
vdev_initialize_stop_wait_impl(vdev_t *vd)
|
|
{
|
|
ASSERT(MUTEX_HELD(&vd->vdev_initialize_lock));
|
|
|
|
while (vd->vdev_initialize_thread != NULL)
|
|
cv_wait(&vd->vdev_initialize_cv, &vd->vdev_initialize_lock);
|
|
|
|
ASSERT3P(vd->vdev_initialize_thread, ==, NULL);
|
|
vd->vdev_initialize_exit_wanted = B_FALSE;
|
|
}
|
|
|
|
/*
|
|
* Wait for vdev initialize threads which were either to cleanly exit.
|
|
*/
|
|
void
|
|
vdev_initialize_stop_wait(spa_t *spa, list_t *vd_list)
|
|
{
|
|
(void) spa;
|
|
vdev_t *vd;
|
|
|
|
ASSERT(MUTEX_HELD(&spa_namespace_lock));
|
|
|
|
while ((vd = list_remove_head(vd_list)) != NULL) {
|
|
mutex_enter(&vd->vdev_initialize_lock);
|
|
vdev_initialize_stop_wait_impl(vd);
|
|
mutex_exit(&vd->vdev_initialize_lock);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Stop initializing a device, with the resultant initializing state being
|
|
* tgt_state. For blocking behavior pass NULL for vd_list. Otherwise, when
|
|
* a list_t is provided the stopping vdev is inserted in to the list. Callers
|
|
* are then required to call vdev_initialize_stop_wait() to block for all the
|
|
* initialization threads to exit. The caller must hold vdev_initialize_lock
|
|
* and must not be writing to the spa config, as the initializing thread may
|
|
* try to enter the config as a reader before exiting.
|
|
*/
|
|
void
|
|
vdev_initialize_stop(vdev_t *vd, vdev_initializing_state_t tgt_state,
|
|
list_t *vd_list)
|
|
{
|
|
ASSERT(!spa_config_held(vd->vdev_spa, SCL_CONFIG|SCL_STATE, RW_WRITER));
|
|
ASSERT(MUTEX_HELD(&vd->vdev_initialize_lock));
|
|
ASSERT(vd->vdev_ops->vdev_op_leaf);
|
|
ASSERT(vdev_is_concrete(vd));
|
|
|
|
/*
|
|
* Allow cancel requests to proceed even if the initialize thread
|
|
* has stopped.
|
|
*/
|
|
if (vd->vdev_initialize_thread == NULL &&
|
|
tgt_state != VDEV_INITIALIZE_CANCELED) {
|
|
return;
|
|
}
|
|
|
|
vdev_initialize_change_state(vd, tgt_state);
|
|
vd->vdev_initialize_exit_wanted = B_TRUE;
|
|
|
|
if (vd_list == NULL) {
|
|
vdev_initialize_stop_wait_impl(vd);
|
|
} else {
|
|
ASSERT(MUTEX_HELD(&spa_namespace_lock));
|
|
list_insert_tail(vd_list, vd);
|
|
}
|
|
}
|
|
|
|
static void
|
|
vdev_initialize_stop_all_impl(vdev_t *vd, vdev_initializing_state_t tgt_state,
|
|
list_t *vd_list)
|
|
{
|
|
if (vd->vdev_ops->vdev_op_leaf && vdev_is_concrete(vd)) {
|
|
mutex_enter(&vd->vdev_initialize_lock);
|
|
vdev_initialize_stop(vd, tgt_state, vd_list);
|
|
mutex_exit(&vd->vdev_initialize_lock);
|
|
return;
|
|
}
|
|
|
|
for (uint64_t i = 0; i < vd->vdev_children; i++) {
|
|
vdev_initialize_stop_all_impl(vd->vdev_child[i], tgt_state,
|
|
vd_list);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Convenience function to stop initializing of a vdev tree and set all
|
|
* initialize thread pointers to NULL.
|
|
*/
|
|
void
|
|
vdev_initialize_stop_all(vdev_t *vd, vdev_initializing_state_t tgt_state)
|
|
{
|
|
spa_t *spa = vd->vdev_spa;
|
|
list_t vd_list;
|
|
|
|
ASSERT(MUTEX_HELD(&spa_namespace_lock));
|
|
|
|
list_create(&vd_list, sizeof (vdev_t),
|
|
offsetof(vdev_t, vdev_initialize_node));
|
|
|
|
vdev_initialize_stop_all_impl(vd, tgt_state, &vd_list);
|
|
vdev_initialize_stop_wait(spa, &vd_list);
|
|
|
|
if (vd->vdev_spa->spa_sync_on) {
|
|
/* Make sure that our state has been synced to disk */
|
|
txg_wait_synced(spa_get_dsl(vd->vdev_spa), 0);
|
|
}
|
|
|
|
list_destroy(&vd_list);
|
|
}
|
|
|
|
void
|
|
vdev_initialize_restart(vdev_t *vd)
|
|
{
|
|
ASSERT(MUTEX_HELD(&spa_namespace_lock));
|
|
ASSERT(!spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER));
|
|
|
|
if (vd->vdev_leaf_zap != 0) {
|
|
mutex_enter(&vd->vdev_initialize_lock);
|
|
uint64_t initialize_state = VDEV_INITIALIZE_NONE;
|
|
int err = zap_lookup(vd->vdev_spa->spa_meta_objset,
|
|
vd->vdev_leaf_zap, VDEV_LEAF_ZAP_INITIALIZE_STATE,
|
|
sizeof (initialize_state), 1, &initialize_state);
|
|
ASSERT(err == 0 || err == ENOENT);
|
|
vd->vdev_initialize_state = initialize_state;
|
|
|
|
uint64_t timestamp = 0;
|
|
err = zap_lookup(vd->vdev_spa->spa_meta_objset,
|
|
vd->vdev_leaf_zap, VDEV_LEAF_ZAP_INITIALIZE_ACTION_TIME,
|
|
sizeof (timestamp), 1, ×tamp);
|
|
ASSERT(err == 0 || err == ENOENT);
|
|
vd->vdev_initialize_action_time = timestamp;
|
|
|
|
if ((vd->vdev_initialize_state == VDEV_INITIALIZE_SUSPENDED ||
|
|
vd->vdev_offline) && !vd->vdev_top->vdev_rz_expanding) {
|
|
/* load progress for reporting, but don't resume */
|
|
VERIFY0(vdev_initialize_load(vd));
|
|
} else if (vd->vdev_initialize_state ==
|
|
VDEV_INITIALIZE_ACTIVE && vdev_writeable(vd) &&
|
|
!vd->vdev_top->vdev_removing &&
|
|
!vd->vdev_top->vdev_rz_expanding &&
|
|
vd->vdev_initialize_thread == NULL) {
|
|
vdev_initialize(vd);
|
|
}
|
|
|
|
mutex_exit(&vd->vdev_initialize_lock);
|
|
}
|
|
|
|
for (uint64_t i = 0; i < vd->vdev_children; i++) {
|
|
vdev_initialize_restart(vd->vdev_child[i]);
|
|
}
|
|
}
|
|
|
|
EXPORT_SYMBOL(vdev_initialize);
|
|
EXPORT_SYMBOL(vdev_uninitialize);
|
|
EXPORT_SYMBOL(vdev_initialize_stop);
|
|
EXPORT_SYMBOL(vdev_initialize_stop_all);
|
|
EXPORT_SYMBOL(vdev_initialize_stop_wait);
|
|
EXPORT_SYMBOL(vdev_initialize_restart);
|
|
|
|
ZFS_MODULE_PARAM(zfs, zfs_, initialize_value, U64, ZMOD_RW,
|
|
"Value written during zpool initialize");
|
|
|
|
ZFS_MODULE_PARAM(zfs, zfs_, initialize_chunk_size, U64, ZMOD_RW,
|
|
"Size in bytes of writes by zpool initialize");
|