mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-26 19:19:32 +03:00
4f2dcb3eee
ZoL commit 1421c89
unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit. Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.
The additional field has been removed by the previous commit. However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied. This will return the pools to a state in which they
may be imported by other implementations.
The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted. A message similar to one of the following means your
pool must be scrubbed to restore compatibility.
$ zpool import
pool: zol-0.6.2-173
id: 1165955789558693437
state: ONLINE
status: Errata #1 detected.
action: The pool can be imported using its name or numeric identifier,
however there is a compatibility issue which should be corrected
by running 'zpool scrub'
see: http://zfsonlinux.org/msg/ZFS-8000-ER
config:
...
$ zpool status
pool: zol-0.6.2-173
state: ONLINE
scan: pool compatibility issue detected.
see: https://github.com/zfsonlinux/zfs/issues/2094
action: To correct the issue run 'zpool scrub'.
config:
...
If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported. Further advice on how to proceed will be
provided by the error message as follows.
$ zpool import
pool: zol-0.6.2-173
id: 1165955789558693437
state: ONLINE
status: Errata #2 detected.
action: The pool can not be imported with this version of ZFS due to an
active asynchronous destroy. Revert to an earlier version and
allow the destroy to complete before updating.
see: http://zfsonlinux.org/msg/ZFS-8000-ER
config:
...
Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:
zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w
Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.
The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys. Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.
This patch does have one limitation that should be mentioned. It will not
detect errata #2 on a pool unless errata #1 is also present. It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.
End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL. The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root. This will display a non-zero
value for any pool with an active asynchronous destroy.
Lastly, it is expected that no user data has been lost as a result of
this erratum.
Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
1826 lines
52 KiB
C
1826 lines
52 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
/*
|
|
* Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2013 by Delphix. All rights reserved.
|
|
*/
|
|
|
|
#include <sys/dsl_scan.h>
|
|
#include <sys/dsl_pool.h>
|
|
#include <sys/dsl_dataset.h>
|
|
#include <sys/dsl_prop.h>
|
|
#include <sys/dsl_dir.h>
|
|
#include <sys/dsl_synctask.h>
|
|
#include <sys/dnode.h>
|
|
#include <sys/dmu_tx.h>
|
|
#include <sys/dmu_objset.h>
|
|
#include <sys/arc.h>
|
|
#include <sys/zap.h>
|
|
#include <sys/zio.h>
|
|
#include <sys/zfs_context.h>
|
|
#include <sys/fs/zfs.h>
|
|
#include <sys/zfs_znode.h>
|
|
#include <sys/spa_impl.h>
|
|
#include <sys/vdev_impl.h>
|
|
#include <sys/zil_impl.h>
|
|
#include <sys/zio_checksum.h>
|
|
#include <sys/ddt.h>
|
|
#include <sys/sa.h>
|
|
#include <sys/sa_impl.h>
|
|
#include <sys/zfeature.h>
|
|
#ifdef _KERNEL
|
|
#include <sys/zfs_vfsops.h>
|
|
#endif
|
|
|
|
typedef int (scan_cb_t)(dsl_pool_t *, const blkptr_t *, const zbookmark_t *);
|
|
|
|
static scan_cb_t dsl_scan_scrub_cb;
|
|
static void dsl_scan_cancel_sync(void *, dmu_tx_t *);
|
|
static void dsl_scan_sync_state(dsl_scan_t *, dmu_tx_t *tx);
|
|
|
|
int zfs_top_maxinflight = 32; /* maximum I/Os per top-level */
|
|
int zfs_resilver_delay = 2; /* number of ticks to delay resilver */
|
|
int zfs_scrub_delay = 4; /* number of ticks to delay scrub */
|
|
int zfs_scan_idle = 50; /* idle window in clock ticks */
|
|
|
|
int zfs_scan_min_time_ms = 1000; /* min millisecs to scrub per txg */
|
|
int zfs_free_min_time_ms = 1000; /* min millisecs to free per txg */
|
|
int zfs_resilver_min_time_ms = 3000; /* min millisecs to resilver per txg */
|
|
int zfs_no_scrub_io = B_FALSE; /* set to disable scrub i/o */
|
|
int zfs_no_scrub_prefetch = B_FALSE; /* set to disable srub prefetching */
|
|
enum ddt_class zfs_scrub_ddt_class_max = DDT_CLASS_DUPLICATE;
|
|
int dsl_scan_delay_completion = B_FALSE; /* set to delay scan completion */
|
|
|
|
#define DSL_SCAN_IS_SCRUB_RESILVER(scn) \
|
|
((scn)->scn_phys.scn_func == POOL_SCAN_SCRUB || \
|
|
(scn)->scn_phys.scn_func == POOL_SCAN_RESILVER)
|
|
|
|
/* the order has to match pool_scan_type */
|
|
static scan_cb_t *scan_funcs[POOL_SCAN_FUNCS] = {
|
|
NULL,
|
|
dsl_scan_scrub_cb, /* POOL_SCAN_SCRUB */
|
|
dsl_scan_scrub_cb, /* POOL_SCAN_RESILVER */
|
|
};
|
|
|
|
int
|
|
dsl_scan_init(dsl_pool_t *dp, uint64_t txg)
|
|
{
|
|
int err;
|
|
dsl_scan_t *scn;
|
|
spa_t *spa = dp->dp_spa;
|
|
uint64_t f;
|
|
|
|
scn = dp->dp_scan = kmem_zalloc(sizeof (dsl_scan_t), KM_SLEEP);
|
|
scn->scn_dp = dp;
|
|
|
|
/*
|
|
* It's possible that we're resuming a scan after a reboot so
|
|
* make sure that the scan_async_destroying flag is initialized
|
|
* appropriately.
|
|
*/
|
|
ASSERT(!scn->scn_async_destroying);
|
|
scn->scn_async_destroying = spa_feature_is_active(dp->dp_spa,
|
|
&spa_feature_table[SPA_FEATURE_ASYNC_DESTROY]);
|
|
|
|
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
|
|
"scrub_func", sizeof (uint64_t), 1, &f);
|
|
if (err == 0) {
|
|
/*
|
|
* There was an old-style scrub in progress. Restart a
|
|
* new-style scrub from the beginning.
|
|
*/
|
|
scn->scn_restart_txg = txg;
|
|
zfs_dbgmsg("old-style scrub was in progress; "
|
|
"restarting new-style scrub in txg %llu",
|
|
scn->scn_restart_txg);
|
|
|
|
/*
|
|
* Load the queue obj from the old location so that it
|
|
* can be freed by dsl_scan_done().
|
|
*/
|
|
(void) zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
|
|
"scrub_queue", sizeof (uint64_t), 1,
|
|
&scn->scn_phys.scn_queue_obj);
|
|
} else {
|
|
err = zap_lookup(dp->dp_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
|
|
DMU_POOL_SCAN, sizeof (uint64_t), SCAN_PHYS_NUMINTS,
|
|
&scn->scn_phys);
|
|
/*
|
|
* Detect if the pool contains the signature of #2094. If it
|
|
* does properly update the scn->scn_phys structure and notify
|
|
* the administrator by setting an errata for the pool.
|
|
*/
|
|
if (err == EOVERFLOW) {
|
|
uint64_t zaptmp[SCAN_PHYS_NUMINTS + 1];
|
|
VERIFY3S(SCAN_PHYS_NUMINTS, ==, 24);
|
|
VERIFY3S(offsetof(dsl_scan_phys_t, scn_flags), ==,
|
|
(23 * sizeof (uint64_t)));
|
|
|
|
err = zap_lookup(dp->dp_meta_objset,
|
|
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_SCAN,
|
|
sizeof (uint64_t), SCAN_PHYS_NUMINTS + 1, &zaptmp);
|
|
if (err == 0) {
|
|
uint64_t overflow = zaptmp[SCAN_PHYS_NUMINTS];
|
|
|
|
if (overflow & ~DSL_SCAN_FLAGS_MASK ||
|
|
scn->scn_async_destroying) {
|
|
spa->spa_errata =
|
|
ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY;
|
|
return (EOVERFLOW);
|
|
}
|
|
|
|
bcopy(zaptmp, &scn->scn_phys,
|
|
SCAN_PHYS_NUMINTS * sizeof (uint64_t));
|
|
scn->scn_phys.scn_flags = overflow;
|
|
|
|
/* Required scrub already in progress. */
|
|
if (scn->scn_phys.scn_state == DSS_FINISHED ||
|
|
scn->scn_phys.scn_state == DSS_CANCELED)
|
|
spa->spa_errata =
|
|
ZPOOL_ERRATA_ZOL_2094_SCRUB;
|
|
}
|
|
}
|
|
|
|
if (err == ENOENT)
|
|
return (0);
|
|
else if (err)
|
|
return (err);
|
|
|
|
if (scn->scn_phys.scn_state == DSS_SCANNING &&
|
|
spa_prev_software_version(dp->dp_spa) < SPA_VERSION_SCAN) {
|
|
/*
|
|
* A new-type scrub was in progress on an old
|
|
* pool, and the pool was accessed by old
|
|
* software. Restart from the beginning, since
|
|
* the old software may have changed the pool in
|
|
* the meantime.
|
|
*/
|
|
scn->scn_restart_txg = txg;
|
|
zfs_dbgmsg("new-style scrub was modified "
|
|
"by old software; restarting in txg %llu",
|
|
scn->scn_restart_txg);
|
|
}
|
|
}
|
|
|
|
spa_scan_stat_init(spa);
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
dsl_scan_fini(dsl_pool_t *dp)
|
|
{
|
|
if (dp->dp_scan) {
|
|
kmem_free(dp->dp_scan, sizeof (dsl_scan_t));
|
|
dp->dp_scan = NULL;
|
|
}
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
dsl_scan_setup_check(void *arg, dmu_tx_t *tx)
|
|
{
|
|
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
|
|
|
|
if (scn->scn_phys.scn_state == DSS_SCANNING)
|
|
return (SET_ERROR(EBUSY));
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
dsl_scan_setup_sync(void *arg, dmu_tx_t *tx)
|
|
{
|
|
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
|
|
pool_scan_func_t *funcp = arg;
|
|
dmu_object_type_t ot = 0;
|
|
dsl_pool_t *dp = scn->scn_dp;
|
|
spa_t *spa = dp->dp_spa;
|
|
|
|
ASSERT(scn->scn_phys.scn_state != DSS_SCANNING);
|
|
ASSERT(*funcp > POOL_SCAN_NONE && *funcp < POOL_SCAN_FUNCS);
|
|
bzero(&scn->scn_phys, sizeof (scn->scn_phys));
|
|
scn->scn_phys.scn_func = *funcp;
|
|
scn->scn_phys.scn_state = DSS_SCANNING;
|
|
scn->scn_phys.scn_min_txg = 0;
|
|
scn->scn_phys.scn_max_txg = tx->tx_txg;
|
|
scn->scn_phys.scn_ddt_class_max = DDT_CLASSES - 1; /* the entire DDT */
|
|
scn->scn_phys.scn_start_time = gethrestime_sec();
|
|
scn->scn_phys.scn_errors = 0;
|
|
scn->scn_phys.scn_to_examine = spa->spa_root_vdev->vdev_stat.vs_alloc;
|
|
scn->scn_restart_txg = 0;
|
|
scn->scn_done_txg = 0;
|
|
spa_scan_stat_init(spa);
|
|
|
|
if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) {
|
|
scn->scn_phys.scn_ddt_class_max = zfs_scrub_ddt_class_max;
|
|
|
|
/* rewrite all disk labels */
|
|
vdev_config_dirty(spa->spa_root_vdev);
|
|
|
|
if (vdev_resilver_needed(spa->spa_root_vdev,
|
|
&scn->scn_phys.scn_min_txg, &scn->scn_phys.scn_max_txg)) {
|
|
spa_event_notify(spa, NULL,
|
|
FM_EREPORT_ZFS_RESILVER_START);
|
|
} else {
|
|
spa_event_notify(spa, NULL,
|
|
FM_EREPORT_ZFS_SCRUB_START);
|
|
}
|
|
|
|
spa->spa_scrub_started = B_TRUE;
|
|
/*
|
|
* If this is an incremental scrub, limit the DDT scrub phase
|
|
* to just the auto-ditto class (for correctness); the rest
|
|
* of the scrub should go faster using top-down pruning.
|
|
*/
|
|
if (scn->scn_phys.scn_min_txg > TXG_INITIAL)
|
|
scn->scn_phys.scn_ddt_class_max = DDT_CLASS_DITTO;
|
|
|
|
}
|
|
|
|
/* back to the generic stuff */
|
|
|
|
if (dp->dp_blkstats == NULL) {
|
|
dp->dp_blkstats = kmem_alloc(sizeof (zfs_all_blkstats_t),
|
|
KM_PUSHPAGE | KM_NODEBUG);
|
|
}
|
|
bzero(dp->dp_blkstats, sizeof (zfs_all_blkstats_t));
|
|
|
|
if (spa_version(spa) < SPA_VERSION_DSL_SCRUB)
|
|
ot = DMU_OT_ZAP_OTHER;
|
|
|
|
scn->scn_phys.scn_queue_obj = zap_create(dp->dp_meta_objset,
|
|
ot ? ot : DMU_OT_SCAN_QUEUE, DMU_OT_NONE, 0, tx);
|
|
|
|
dsl_scan_sync_state(scn, tx);
|
|
|
|
spa_history_log_internal(spa, "scan setup", tx,
|
|
"func=%u mintxg=%llu maxtxg=%llu",
|
|
*funcp, scn->scn_phys.scn_min_txg, scn->scn_phys.scn_max_txg);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static void
|
|
dsl_scan_done(dsl_scan_t *scn, boolean_t complete, dmu_tx_t *tx)
|
|
{
|
|
static const char *old_names[] = {
|
|
"scrub_bookmark",
|
|
"scrub_ddt_bookmark",
|
|
"scrub_ddt_class_max",
|
|
"scrub_queue",
|
|
"scrub_min_txg",
|
|
"scrub_max_txg",
|
|
"scrub_func",
|
|
"scrub_errors",
|
|
NULL
|
|
};
|
|
|
|
dsl_pool_t *dp = scn->scn_dp;
|
|
spa_t *spa = dp->dp_spa;
|
|
int i;
|
|
|
|
/* Remove any remnants of an old-style scrub. */
|
|
for (i = 0; old_names[i]; i++) {
|
|
(void) zap_remove(dp->dp_meta_objset,
|
|
DMU_POOL_DIRECTORY_OBJECT, old_names[i], tx);
|
|
}
|
|
|
|
if (scn->scn_phys.scn_queue_obj != 0) {
|
|
VERIFY(0 == dmu_object_free(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, tx));
|
|
scn->scn_phys.scn_queue_obj = 0;
|
|
}
|
|
|
|
/*
|
|
* If we were "restarted" from a stopped state, don't bother
|
|
* with anything else.
|
|
*/
|
|
if (scn->scn_phys.scn_state != DSS_SCANNING)
|
|
return;
|
|
|
|
if (complete)
|
|
scn->scn_phys.scn_state = DSS_FINISHED;
|
|
else
|
|
scn->scn_phys.scn_state = DSS_CANCELED;
|
|
|
|
spa_history_log_internal(spa, "scan done", tx,
|
|
"complete=%u", complete);
|
|
|
|
if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) {
|
|
mutex_enter(&spa->spa_scrub_lock);
|
|
while (spa->spa_scrub_inflight > 0) {
|
|
cv_wait(&spa->spa_scrub_io_cv,
|
|
&spa->spa_scrub_lock);
|
|
}
|
|
mutex_exit(&spa->spa_scrub_lock);
|
|
spa->spa_scrub_started = B_FALSE;
|
|
spa->spa_scrub_active = B_FALSE;
|
|
|
|
/*
|
|
* If the scrub/resilver completed, update all DTLs to
|
|
* reflect this. Whether it succeeded or not, vacate
|
|
* all temporary scrub DTLs.
|
|
*/
|
|
vdev_dtl_reassess(spa->spa_root_vdev, tx->tx_txg,
|
|
complete ? scn->scn_phys.scn_max_txg : 0, B_TRUE);
|
|
if (complete) {
|
|
spa_event_notify(spa, NULL, scn->scn_phys.scn_min_txg ?
|
|
FM_EREPORT_ZFS_RESILVER_FINISH :
|
|
FM_EREPORT_ZFS_SCRUB_FINISH);
|
|
}
|
|
spa_errlog_rotate(spa);
|
|
|
|
/*
|
|
* We may have finished replacing a device.
|
|
* Let the async thread assess this and handle the detach.
|
|
*/
|
|
spa_async_request(spa, SPA_ASYNC_RESILVER_DONE);
|
|
}
|
|
|
|
scn->scn_phys.scn_end_time = gethrestime_sec();
|
|
|
|
if (spa->spa_errata == ZPOOL_ERRATA_ZOL_2094_SCRUB)
|
|
spa->spa_errata = 0;
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
dsl_scan_cancel_check(void *arg, dmu_tx_t *tx)
|
|
{
|
|
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
|
|
|
|
if (scn->scn_phys.scn_state != DSS_SCANNING)
|
|
return (SET_ERROR(ENOENT));
|
|
return (0);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static void
|
|
dsl_scan_cancel_sync(void *arg, dmu_tx_t *tx)
|
|
{
|
|
dsl_scan_t *scn = dmu_tx_pool(tx)->dp_scan;
|
|
|
|
dsl_scan_done(scn, B_FALSE, tx);
|
|
dsl_scan_sync_state(scn, tx);
|
|
}
|
|
|
|
int
|
|
dsl_scan_cancel(dsl_pool_t *dp)
|
|
{
|
|
return (dsl_sync_task(spa_name(dp->dp_spa), dsl_scan_cancel_check,
|
|
dsl_scan_cancel_sync, NULL, 3));
|
|
}
|
|
|
|
static void dsl_scan_visitbp(blkptr_t *bp,
|
|
const zbookmark_t *zb, dnode_phys_t *dnp, arc_buf_t *pbuf,
|
|
dsl_dataset_t *ds, dsl_scan_t *scn, dmu_objset_type_t ostype,
|
|
dmu_tx_t *tx);
|
|
inline __attribute__((always_inline)) static void dsl_scan_visitdnode(
|
|
dsl_scan_t *, dsl_dataset_t *ds, dmu_objset_type_t ostype,
|
|
dnode_phys_t *dnp, arc_buf_t *buf, uint64_t object, dmu_tx_t *tx);
|
|
|
|
void
|
|
dsl_free(dsl_pool_t *dp, uint64_t txg, const blkptr_t *bp)
|
|
{
|
|
zio_free(dp->dp_spa, txg, bp);
|
|
}
|
|
|
|
void
|
|
dsl_free_sync(zio_t *pio, dsl_pool_t *dp, uint64_t txg, const blkptr_t *bpp)
|
|
{
|
|
ASSERT(dsl_pool_sync_context(dp));
|
|
zio_nowait(zio_free_sync(pio, dp->dp_spa, txg, bpp, pio->io_flags));
|
|
}
|
|
|
|
static uint64_t
|
|
dsl_scan_ds_maxtxg(dsl_dataset_t *ds)
|
|
{
|
|
uint64_t smt = ds->ds_dir->dd_pool->dp_scan->scn_phys.scn_max_txg;
|
|
if (dsl_dataset_is_snapshot(ds))
|
|
return (MIN(smt, ds->ds_phys->ds_creation_txg));
|
|
return (smt);
|
|
}
|
|
|
|
static void
|
|
dsl_scan_sync_state(dsl_scan_t *scn, dmu_tx_t *tx)
|
|
{
|
|
VERIFY0(zap_update(scn->scn_dp->dp_meta_objset,
|
|
DMU_POOL_DIRECTORY_OBJECT,
|
|
DMU_POOL_SCAN, sizeof (uint64_t), SCAN_PHYS_NUMINTS,
|
|
&scn->scn_phys, tx));
|
|
}
|
|
|
|
static boolean_t
|
|
dsl_scan_check_pause(dsl_scan_t *scn, const zbookmark_t *zb)
|
|
{
|
|
uint64_t elapsed_nanosecs;
|
|
int mintime;
|
|
|
|
/* we never skip user/group accounting objects */
|
|
if (zb && (int64_t)zb->zb_object < 0)
|
|
return (B_FALSE);
|
|
|
|
if (scn->scn_pausing)
|
|
return (B_TRUE); /* we're already pausing */
|
|
|
|
if (!ZB_IS_ZERO(&scn->scn_phys.scn_bookmark))
|
|
return (B_FALSE); /* we're resuming */
|
|
|
|
/* We only know how to resume from level-0 blocks. */
|
|
if (zb && zb->zb_level != 0)
|
|
return (B_FALSE);
|
|
|
|
mintime = (scn->scn_phys.scn_func == POOL_SCAN_RESILVER) ?
|
|
zfs_resilver_min_time_ms : zfs_scan_min_time_ms;
|
|
elapsed_nanosecs = gethrtime() - scn->scn_sync_start_time;
|
|
if (elapsed_nanosecs / NANOSEC > zfs_txg_timeout ||
|
|
(NSEC2MSEC(elapsed_nanosecs) > mintime &&
|
|
txg_sync_waiting(scn->scn_dp)) ||
|
|
spa_shutting_down(scn->scn_dp->dp_spa)) {
|
|
if (zb) {
|
|
dprintf("pausing at bookmark %llx/%llx/%llx/%llx\n",
|
|
(longlong_t)zb->zb_objset,
|
|
(longlong_t)zb->zb_object,
|
|
(longlong_t)zb->zb_level,
|
|
(longlong_t)zb->zb_blkid);
|
|
scn->scn_phys.scn_bookmark = *zb;
|
|
}
|
|
dprintf("pausing at DDT bookmark %llx/%llx/%llx/%llx\n",
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_class,
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_type,
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_checksum,
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_cursor);
|
|
scn->scn_pausing = B_TRUE;
|
|
return (B_TRUE);
|
|
}
|
|
return (B_FALSE);
|
|
}
|
|
|
|
typedef struct zil_scan_arg {
|
|
dsl_pool_t *zsa_dp;
|
|
zil_header_t *zsa_zh;
|
|
} zil_scan_arg_t;
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
dsl_scan_zil_block(zilog_t *zilog, blkptr_t *bp, void *arg, uint64_t claim_txg)
|
|
{
|
|
zil_scan_arg_t *zsa = arg;
|
|
dsl_pool_t *dp = zsa->zsa_dp;
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
zil_header_t *zh = zsa->zsa_zh;
|
|
zbookmark_t zb;
|
|
|
|
if (bp->blk_birth <= scn->scn_phys.scn_cur_min_txg)
|
|
return (0);
|
|
|
|
/*
|
|
* One block ("stubby") can be allocated a long time ago; we
|
|
* want to visit that one because it has been allocated
|
|
* (on-disk) even if it hasn't been claimed (even though for
|
|
* scrub there's nothing to do to it).
|
|
*/
|
|
if (claim_txg == 0 && bp->blk_birth >= spa_first_txg(dp->dp_spa))
|
|
return (0);
|
|
|
|
SET_BOOKMARK(&zb, zh->zh_log.blk_cksum.zc_word[ZIL_ZC_OBJSET],
|
|
ZB_ZIL_OBJECT, ZB_ZIL_LEVEL, bp->blk_cksum.zc_word[ZIL_ZC_SEQ]);
|
|
|
|
VERIFY(0 == scan_funcs[scn->scn_phys.scn_func](dp, bp, &zb));
|
|
return (0);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
dsl_scan_zil_record(zilog_t *zilog, lr_t *lrc, void *arg, uint64_t claim_txg)
|
|
{
|
|
if (lrc->lrc_txtype == TX_WRITE) {
|
|
zil_scan_arg_t *zsa = arg;
|
|
dsl_pool_t *dp = zsa->zsa_dp;
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
zil_header_t *zh = zsa->zsa_zh;
|
|
lr_write_t *lr = (lr_write_t *)lrc;
|
|
blkptr_t *bp = &lr->lr_blkptr;
|
|
zbookmark_t zb;
|
|
|
|
if (bp->blk_birth <= scn->scn_phys.scn_cur_min_txg)
|
|
return (0);
|
|
|
|
/*
|
|
* birth can be < claim_txg if this record's txg is
|
|
* already txg sync'ed (but this log block contains
|
|
* other records that are not synced)
|
|
*/
|
|
if (claim_txg == 0 || bp->blk_birth < claim_txg)
|
|
return (0);
|
|
|
|
SET_BOOKMARK(&zb, zh->zh_log.blk_cksum.zc_word[ZIL_ZC_OBJSET],
|
|
lr->lr_foid, ZB_ZIL_LEVEL,
|
|
lr->lr_offset / BP_GET_LSIZE(bp));
|
|
|
|
VERIFY(0 == scan_funcs[scn->scn_phys.scn_func](dp, bp, &zb));
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
dsl_scan_zil(dsl_pool_t *dp, zil_header_t *zh)
|
|
{
|
|
uint64_t claim_txg = zh->zh_claim_txg;
|
|
zil_scan_arg_t zsa = { dp, zh };
|
|
zilog_t *zilog;
|
|
|
|
/*
|
|
* We only want to visit blocks that have been claimed but not yet
|
|
* replayed (or, in read-only mode, blocks that *would* be claimed).
|
|
*/
|
|
if (claim_txg == 0 && spa_writeable(dp->dp_spa))
|
|
return;
|
|
|
|
zilog = zil_alloc(dp->dp_meta_objset, zh);
|
|
|
|
(void) zil_parse(zilog, dsl_scan_zil_block, dsl_scan_zil_record, &zsa,
|
|
claim_txg);
|
|
|
|
zil_free(zilog);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static void
|
|
dsl_scan_prefetch(dsl_scan_t *scn, arc_buf_t *buf, blkptr_t *bp,
|
|
uint64_t objset, uint64_t object, uint64_t blkid)
|
|
{
|
|
zbookmark_t czb;
|
|
uint32_t flags = ARC_NOWAIT | ARC_PREFETCH;
|
|
|
|
if (zfs_no_scrub_prefetch)
|
|
return;
|
|
|
|
if (BP_IS_HOLE(bp) || bp->blk_birth <= scn->scn_phys.scn_min_txg ||
|
|
(BP_GET_LEVEL(bp) == 0 && BP_GET_TYPE(bp) != DMU_OT_DNODE))
|
|
return;
|
|
|
|
SET_BOOKMARK(&czb, objset, object, BP_GET_LEVEL(bp), blkid);
|
|
|
|
(void) arc_read(scn->scn_zio_root, scn->scn_dp->dp_spa, bp,
|
|
NULL, NULL, ZIO_PRIORITY_ASYNC_READ,
|
|
ZIO_FLAG_CANFAIL | ZIO_FLAG_SCAN_THREAD, &flags, &czb);
|
|
}
|
|
|
|
static boolean_t
|
|
dsl_scan_check_resume(dsl_scan_t *scn, const dnode_phys_t *dnp,
|
|
const zbookmark_t *zb)
|
|
{
|
|
/*
|
|
* We never skip over user/group accounting objects (obj<0)
|
|
*/
|
|
if (!ZB_IS_ZERO(&scn->scn_phys.scn_bookmark) &&
|
|
(int64_t)zb->zb_object >= 0) {
|
|
/*
|
|
* If we already visited this bp & everything below (in
|
|
* a prior txg sync), don't bother doing it again.
|
|
*/
|
|
if (zbookmark_is_before(dnp, zb, &scn->scn_phys.scn_bookmark))
|
|
return (B_TRUE);
|
|
|
|
/*
|
|
* If we found the block we're trying to resume from, or
|
|
* we went past it to a different object, zero it out to
|
|
* indicate that it's OK to start checking for pausing
|
|
* again.
|
|
*/
|
|
if (bcmp(zb, &scn->scn_phys.scn_bookmark, sizeof (*zb)) == 0 ||
|
|
zb->zb_object > scn->scn_phys.scn_bookmark.zb_object) {
|
|
dprintf("resuming at %llx/%llx/%llx/%llx\n",
|
|
(longlong_t)zb->zb_objset,
|
|
(longlong_t)zb->zb_object,
|
|
(longlong_t)zb->zb_level,
|
|
(longlong_t)zb->zb_blkid);
|
|
bzero(&scn->scn_phys.scn_bookmark, sizeof (*zb));
|
|
}
|
|
}
|
|
return (B_FALSE);
|
|
}
|
|
|
|
/*
|
|
* Return nonzero on i/o error.
|
|
* Return new buf to write out in *bufp.
|
|
*/
|
|
inline __attribute__((always_inline)) static int
|
|
dsl_scan_recurse(dsl_scan_t *scn, dsl_dataset_t *ds, dmu_objset_type_t ostype,
|
|
dnode_phys_t *dnp, const blkptr_t *bp,
|
|
const zbookmark_t *zb, dmu_tx_t *tx, arc_buf_t **bufp)
|
|
{
|
|
dsl_pool_t *dp = scn->scn_dp;
|
|
int zio_flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_SCAN_THREAD;
|
|
int err;
|
|
|
|
if (BP_GET_LEVEL(bp) > 0) {
|
|
uint32_t flags = ARC_WAIT;
|
|
int i;
|
|
blkptr_t *cbp;
|
|
int epb = BP_GET_LSIZE(bp) >> SPA_BLKPTRSHIFT;
|
|
|
|
err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, bufp,
|
|
ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb);
|
|
if (err) {
|
|
scn->scn_phys.scn_errors++;
|
|
return (err);
|
|
}
|
|
for (i = 0, cbp = (*bufp)->b_data; i < epb; i++, cbp++) {
|
|
dsl_scan_prefetch(scn, *bufp, cbp, zb->zb_objset,
|
|
zb->zb_object, zb->zb_blkid * epb + i);
|
|
}
|
|
for (i = 0, cbp = (*bufp)->b_data; i < epb; i++, cbp++) {
|
|
zbookmark_t czb;
|
|
|
|
SET_BOOKMARK(&czb, zb->zb_objset, zb->zb_object,
|
|
zb->zb_level - 1,
|
|
zb->zb_blkid * epb + i);
|
|
dsl_scan_visitbp(cbp, &czb, dnp,
|
|
*bufp, ds, scn, ostype, tx);
|
|
}
|
|
} else if (BP_GET_TYPE(bp) == DMU_OT_USERGROUP_USED) {
|
|
uint32_t flags = ARC_WAIT;
|
|
|
|
err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, bufp,
|
|
ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb);
|
|
if (err) {
|
|
scn->scn_phys.scn_errors++;
|
|
return (err);
|
|
}
|
|
} else if (BP_GET_TYPE(bp) == DMU_OT_DNODE) {
|
|
uint32_t flags = ARC_WAIT;
|
|
dnode_phys_t *cdnp;
|
|
int i, j;
|
|
int epb = BP_GET_LSIZE(bp) >> DNODE_SHIFT;
|
|
|
|
err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, bufp,
|
|
ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb);
|
|
if (err) {
|
|
scn->scn_phys.scn_errors++;
|
|
return (err);
|
|
}
|
|
for (i = 0, cdnp = (*bufp)->b_data; i < epb; i++, cdnp++) {
|
|
for (j = 0; j < cdnp->dn_nblkptr; j++) {
|
|
blkptr_t *cbp = &cdnp->dn_blkptr[j];
|
|
dsl_scan_prefetch(scn, *bufp, cbp,
|
|
zb->zb_objset, zb->zb_blkid * epb + i, j);
|
|
}
|
|
}
|
|
for (i = 0, cdnp = (*bufp)->b_data; i < epb; i++, cdnp++) {
|
|
dsl_scan_visitdnode(scn, ds, ostype,
|
|
cdnp, *bufp, zb->zb_blkid * epb + i, tx);
|
|
}
|
|
|
|
} else if (BP_GET_TYPE(bp) == DMU_OT_OBJSET) {
|
|
uint32_t flags = ARC_WAIT;
|
|
objset_phys_t *osp;
|
|
|
|
err = arc_read(NULL, dp->dp_spa, bp, arc_getbuf_func, bufp,
|
|
ZIO_PRIORITY_ASYNC_READ, zio_flags, &flags, zb);
|
|
if (err) {
|
|
scn->scn_phys.scn_errors++;
|
|
return (err);
|
|
}
|
|
|
|
osp = (*bufp)->b_data;
|
|
|
|
dsl_scan_visitdnode(scn, ds, osp->os_type,
|
|
&osp->os_meta_dnode, *bufp, DMU_META_DNODE_OBJECT, tx);
|
|
|
|
if (OBJSET_BUF_HAS_USERUSED(*bufp)) {
|
|
/*
|
|
* We also always visit user/group accounting
|
|
* objects, and never skip them, even if we are
|
|
* pausing. This is necessary so that the space
|
|
* deltas from this txg get integrated.
|
|
*/
|
|
dsl_scan_visitdnode(scn, ds, osp->os_type,
|
|
&osp->os_groupused_dnode, *bufp,
|
|
DMU_GROUPUSED_OBJECT, tx);
|
|
dsl_scan_visitdnode(scn, ds, osp->os_type,
|
|
&osp->os_userused_dnode, *bufp,
|
|
DMU_USERUSED_OBJECT, tx);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
inline __attribute__((always_inline)) static void
|
|
dsl_scan_visitdnode(dsl_scan_t *scn, dsl_dataset_t *ds,
|
|
dmu_objset_type_t ostype, dnode_phys_t *dnp, arc_buf_t *buf,
|
|
uint64_t object, dmu_tx_t *tx)
|
|
{
|
|
int j;
|
|
|
|
for (j = 0; j < dnp->dn_nblkptr; j++) {
|
|
zbookmark_t czb;
|
|
|
|
SET_BOOKMARK(&czb, ds ? ds->ds_object : 0, object,
|
|
dnp->dn_nlevels - 1, j);
|
|
dsl_scan_visitbp(&dnp->dn_blkptr[j],
|
|
&czb, dnp, buf, ds, scn, ostype, tx);
|
|
}
|
|
|
|
if (dnp->dn_flags & DNODE_FLAG_SPILL_BLKPTR) {
|
|
zbookmark_t czb;
|
|
SET_BOOKMARK(&czb, ds ? ds->ds_object : 0, object,
|
|
0, DMU_SPILL_BLKID);
|
|
dsl_scan_visitbp(&dnp->dn_spill,
|
|
&czb, dnp, buf, ds, scn, ostype, tx);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* The arguments are in this order because mdb can only print the
|
|
* first 5; we want them to be useful.
|
|
*/
|
|
static void
|
|
dsl_scan_visitbp(blkptr_t *bp, const zbookmark_t *zb,
|
|
dnode_phys_t *dnp, arc_buf_t *pbuf,
|
|
dsl_dataset_t *ds, dsl_scan_t *scn, dmu_objset_type_t ostype,
|
|
dmu_tx_t *tx)
|
|
{
|
|
dsl_pool_t *dp = scn->scn_dp;
|
|
arc_buf_t *buf = NULL;
|
|
blkptr_t *bp_toread;
|
|
|
|
bp_toread = kmem_alloc(sizeof (blkptr_t), KM_PUSHPAGE);
|
|
*bp_toread = *bp;
|
|
|
|
/* ASSERT(pbuf == NULL || arc_released(pbuf)); */
|
|
|
|
if (dsl_scan_check_pause(scn, zb))
|
|
goto out;
|
|
|
|
if (dsl_scan_check_resume(scn, dnp, zb))
|
|
goto out;
|
|
|
|
if (bp->blk_birth == 0)
|
|
goto out;
|
|
|
|
scn->scn_visited_this_txg++;
|
|
|
|
/*
|
|
* This debugging is commented out to conserve stack space. This
|
|
* function is called recursively and the debugging addes several
|
|
* bytes to the stack for each call. It can be commented back in
|
|
* if required to debug an issue in dsl_scan_visitbp().
|
|
*
|
|
* dprintf_bp(bp,
|
|
* "visiting ds=%p/%llu zb=%llx/%llx/%llx/%llx buf=%p bp=%p",
|
|
* ds, ds ? ds->ds_object : 0,
|
|
* zb->zb_objset, zb->zb_object, zb->zb_level, zb->zb_blkid,
|
|
* pbuf, bp);
|
|
*/
|
|
|
|
if (bp->blk_birth <= scn->scn_phys.scn_cur_min_txg)
|
|
goto out;
|
|
|
|
if (dsl_scan_recurse(scn, ds, ostype, dnp, bp_toread, zb, tx,
|
|
&buf) != 0)
|
|
goto out;
|
|
|
|
/*
|
|
* If dsl_scan_ddt() has aready visited this block, it will have
|
|
* already done any translations or scrubbing, so don't call the
|
|
* callback again.
|
|
*/
|
|
if (ddt_class_contains(dp->dp_spa,
|
|
scn->scn_phys.scn_ddt_class_max, bp)) {
|
|
ASSERT(buf == NULL);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* If this block is from the future (after cur_max_txg), then we
|
|
* are doing this on behalf of a deleted snapshot, and we will
|
|
* revisit the future block on the next pass of this dataset.
|
|
* Don't scan it now unless we need to because something
|
|
* under it was modified.
|
|
*/
|
|
if (BP_PHYSICAL_BIRTH(bp) <= scn->scn_phys.scn_cur_max_txg) {
|
|
scan_funcs[scn->scn_phys.scn_func](dp, bp, zb);
|
|
}
|
|
if (buf)
|
|
(void) arc_buf_remove_ref(buf, &buf);
|
|
out:
|
|
kmem_free(bp_toread, sizeof (blkptr_t));
|
|
}
|
|
|
|
static void
|
|
dsl_scan_visit_rootbp(dsl_scan_t *scn, dsl_dataset_t *ds, blkptr_t *bp,
|
|
dmu_tx_t *tx)
|
|
{
|
|
zbookmark_t zb;
|
|
|
|
SET_BOOKMARK(&zb, ds ? ds->ds_object : DMU_META_OBJSET,
|
|
ZB_ROOT_OBJECT, ZB_ROOT_LEVEL, ZB_ROOT_BLKID);
|
|
dsl_scan_visitbp(bp, &zb, NULL, NULL,
|
|
ds, scn, DMU_OST_NONE, tx);
|
|
|
|
dprintf_ds(ds, "finished scan%s", "");
|
|
}
|
|
|
|
void
|
|
dsl_scan_ds_destroyed(dsl_dataset_t *ds, dmu_tx_t *tx)
|
|
{
|
|
dsl_pool_t *dp = ds->ds_dir->dd_pool;
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
uint64_t mintxg;
|
|
|
|
if (scn->scn_phys.scn_state != DSS_SCANNING)
|
|
return;
|
|
|
|
if (scn->scn_phys.scn_bookmark.zb_objset == ds->ds_object) {
|
|
if (dsl_dataset_is_snapshot(ds)) {
|
|
/* Note, scn_cur_{min,max}_txg stays the same. */
|
|
scn->scn_phys.scn_bookmark.zb_objset =
|
|
ds->ds_phys->ds_next_snap_obj;
|
|
zfs_dbgmsg("destroying ds %llu; currently traversing; "
|
|
"reset zb_objset to %llu",
|
|
(u_longlong_t)ds->ds_object,
|
|
(u_longlong_t)ds->ds_phys->ds_next_snap_obj);
|
|
scn->scn_phys.scn_flags |= DSF_VISIT_DS_AGAIN;
|
|
} else {
|
|
SET_BOOKMARK(&scn->scn_phys.scn_bookmark,
|
|
ZB_DESTROYED_OBJSET, 0, 0, 0);
|
|
zfs_dbgmsg("destroying ds %llu; currently traversing; "
|
|
"reset bookmark to -1,0,0,0",
|
|
(u_longlong_t)ds->ds_object);
|
|
}
|
|
} else if (zap_lookup_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds->ds_object, &mintxg) == 0) {
|
|
ASSERT3U(ds->ds_phys->ds_num_children, <=, 1);
|
|
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds->ds_object, tx));
|
|
if (dsl_dataset_is_snapshot(ds)) {
|
|
/*
|
|
* We keep the same mintxg; it could be >
|
|
* ds_creation_txg if the previous snapshot was
|
|
* deleted too.
|
|
*/
|
|
VERIFY(zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj,
|
|
ds->ds_phys->ds_next_snap_obj, mintxg, tx) == 0);
|
|
zfs_dbgmsg("destroying ds %llu; in queue; "
|
|
"replacing with %llu",
|
|
(u_longlong_t)ds->ds_object,
|
|
(u_longlong_t)ds->ds_phys->ds_next_snap_obj);
|
|
} else {
|
|
zfs_dbgmsg("destroying ds %llu; in queue; removing",
|
|
(u_longlong_t)ds->ds_object);
|
|
}
|
|
} else {
|
|
zfs_dbgmsg("destroying ds %llu; ignoring",
|
|
(u_longlong_t)ds->ds_object);
|
|
}
|
|
|
|
/*
|
|
* dsl_scan_sync() should be called after this, and should sync
|
|
* out our changed state, but just to be safe, do it here.
|
|
*/
|
|
dsl_scan_sync_state(scn, tx);
|
|
}
|
|
|
|
void
|
|
dsl_scan_ds_snapshotted(dsl_dataset_t *ds, dmu_tx_t *tx)
|
|
{
|
|
dsl_pool_t *dp = ds->ds_dir->dd_pool;
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
uint64_t mintxg;
|
|
|
|
if (scn->scn_phys.scn_state != DSS_SCANNING)
|
|
return;
|
|
|
|
ASSERT(ds->ds_phys->ds_prev_snap_obj != 0);
|
|
|
|
if (scn->scn_phys.scn_bookmark.zb_objset == ds->ds_object) {
|
|
scn->scn_phys.scn_bookmark.zb_objset =
|
|
ds->ds_phys->ds_prev_snap_obj;
|
|
zfs_dbgmsg("snapshotting ds %llu; currently traversing; "
|
|
"reset zb_objset to %llu",
|
|
(u_longlong_t)ds->ds_object,
|
|
(u_longlong_t)ds->ds_phys->ds_prev_snap_obj);
|
|
} else if (zap_lookup_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds->ds_object, &mintxg) == 0) {
|
|
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds->ds_object, tx));
|
|
VERIFY(zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj,
|
|
ds->ds_phys->ds_prev_snap_obj, mintxg, tx) == 0);
|
|
zfs_dbgmsg("snapshotting ds %llu; in queue; "
|
|
"replacing with %llu",
|
|
(u_longlong_t)ds->ds_object,
|
|
(u_longlong_t)ds->ds_phys->ds_prev_snap_obj);
|
|
}
|
|
dsl_scan_sync_state(scn, tx);
|
|
}
|
|
|
|
void
|
|
dsl_scan_ds_clone_swapped(dsl_dataset_t *ds1, dsl_dataset_t *ds2, dmu_tx_t *tx)
|
|
{
|
|
dsl_pool_t *dp = ds1->ds_dir->dd_pool;
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
uint64_t mintxg;
|
|
|
|
if (scn->scn_phys.scn_state != DSS_SCANNING)
|
|
return;
|
|
|
|
if (scn->scn_phys.scn_bookmark.zb_objset == ds1->ds_object) {
|
|
scn->scn_phys.scn_bookmark.zb_objset = ds2->ds_object;
|
|
zfs_dbgmsg("clone_swap ds %llu; currently traversing; "
|
|
"reset zb_objset to %llu",
|
|
(u_longlong_t)ds1->ds_object,
|
|
(u_longlong_t)ds2->ds_object);
|
|
} else if (scn->scn_phys.scn_bookmark.zb_objset == ds2->ds_object) {
|
|
scn->scn_phys.scn_bookmark.zb_objset = ds1->ds_object;
|
|
zfs_dbgmsg("clone_swap ds %llu; currently traversing; "
|
|
"reset zb_objset to %llu",
|
|
(u_longlong_t)ds2->ds_object,
|
|
(u_longlong_t)ds1->ds_object);
|
|
}
|
|
|
|
if (zap_lookup_int_key(dp->dp_meta_objset, scn->scn_phys.scn_queue_obj,
|
|
ds1->ds_object, &mintxg) == 0) {
|
|
int err;
|
|
|
|
ASSERT3U(mintxg, ==, ds1->ds_phys->ds_prev_snap_txg);
|
|
ASSERT3U(mintxg, ==, ds2->ds_phys->ds_prev_snap_txg);
|
|
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds1->ds_object, tx));
|
|
err = zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds2->ds_object, mintxg, tx);
|
|
VERIFY(err == 0 || err == EEXIST);
|
|
if (err == EEXIST) {
|
|
/* Both were there to begin with */
|
|
VERIFY(0 == zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj,
|
|
ds1->ds_object, mintxg, tx));
|
|
}
|
|
zfs_dbgmsg("clone_swap ds %llu; in queue; "
|
|
"replacing with %llu",
|
|
(u_longlong_t)ds1->ds_object,
|
|
(u_longlong_t)ds2->ds_object);
|
|
} else if (zap_lookup_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds2->ds_object, &mintxg) == 0) {
|
|
ASSERT3U(mintxg, ==, ds1->ds_phys->ds_prev_snap_txg);
|
|
ASSERT3U(mintxg, ==, ds2->ds_phys->ds_prev_snap_txg);
|
|
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds2->ds_object, tx));
|
|
VERIFY(0 == zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds1->ds_object, mintxg, tx));
|
|
zfs_dbgmsg("clone_swap ds %llu; in queue; "
|
|
"replacing with %llu",
|
|
(u_longlong_t)ds2->ds_object,
|
|
(u_longlong_t)ds1->ds_object);
|
|
}
|
|
|
|
dsl_scan_sync_state(scn, tx);
|
|
}
|
|
|
|
struct enqueue_clones_arg {
|
|
dmu_tx_t *tx;
|
|
uint64_t originobj;
|
|
};
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
enqueue_clones_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg)
|
|
{
|
|
struct enqueue_clones_arg *eca = arg;
|
|
dsl_dataset_t *ds;
|
|
int err;
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
|
|
if (hds->ds_dir->dd_phys->dd_origin_obj != eca->originobj)
|
|
return (0);
|
|
|
|
err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds);
|
|
if (err)
|
|
return (err);
|
|
|
|
while (ds->ds_phys->ds_prev_snap_obj != eca->originobj) {
|
|
dsl_dataset_t *prev;
|
|
err = dsl_dataset_hold_obj(dp,
|
|
ds->ds_phys->ds_prev_snap_obj, FTAG, &prev);
|
|
|
|
dsl_dataset_rele(ds, FTAG);
|
|
if (err)
|
|
return (err);
|
|
ds = prev;
|
|
}
|
|
VERIFY(zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds->ds_object,
|
|
ds->ds_phys->ds_prev_snap_txg, eca->tx) == 0);
|
|
dsl_dataset_rele(ds, FTAG);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
dsl_scan_visitds(dsl_scan_t *scn, uint64_t dsobj, dmu_tx_t *tx)
|
|
{
|
|
dsl_pool_t *dp = scn->scn_dp;
|
|
dsl_dataset_t *ds;
|
|
objset_t *os;
|
|
char *dsname;
|
|
|
|
VERIFY3U(0, ==, dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds));
|
|
|
|
if (dmu_objset_from_ds(ds, &os))
|
|
goto out;
|
|
|
|
/*
|
|
* Only the ZIL in the head (non-snapshot) is valid. Even though
|
|
* snapshots can have ZIL block pointers (which may be the same
|
|
* BP as in the head), they must be ignored. So we traverse the
|
|
* ZIL here, rather than in scan_recurse(), because the regular
|
|
* snapshot block-sharing rules don't apply to it.
|
|
*/
|
|
if (DSL_SCAN_IS_SCRUB_RESILVER(scn) && !dsl_dataset_is_snapshot(ds))
|
|
dsl_scan_zil(dp, &os->os_zil_header);
|
|
|
|
/*
|
|
* Iterate over the bps in this ds.
|
|
*/
|
|
dmu_buf_will_dirty(ds->ds_dbuf, tx);
|
|
dsl_scan_visit_rootbp(scn, ds, &ds->ds_phys->ds_bp, tx);
|
|
|
|
dsname = kmem_alloc(ZFS_MAXNAMELEN, KM_PUSHPAGE);
|
|
dsl_dataset_name(ds, dsname);
|
|
zfs_dbgmsg("scanned dataset %llu (%s) with min=%llu max=%llu; "
|
|
"pausing=%u",
|
|
(longlong_t)dsobj, dsname,
|
|
(longlong_t)scn->scn_phys.scn_cur_min_txg,
|
|
(longlong_t)scn->scn_phys.scn_cur_max_txg,
|
|
(int)scn->scn_pausing);
|
|
kmem_free(dsname, ZFS_MAXNAMELEN);
|
|
|
|
if (scn->scn_pausing)
|
|
goto out;
|
|
|
|
/*
|
|
* We've finished this pass over this dataset.
|
|
*/
|
|
|
|
/*
|
|
* If we did not completely visit this dataset, do another pass.
|
|
*/
|
|
if (scn->scn_phys.scn_flags & DSF_VISIT_DS_AGAIN) {
|
|
zfs_dbgmsg("incomplete pass; visiting again");
|
|
scn->scn_phys.scn_flags &= ~DSF_VISIT_DS_AGAIN;
|
|
VERIFY(zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds->ds_object,
|
|
scn->scn_phys.scn_cur_max_txg, tx) == 0);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Add descendent datasets to work queue.
|
|
*/
|
|
if (ds->ds_phys->ds_next_snap_obj != 0) {
|
|
VERIFY(zap_add_int_key(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, ds->ds_phys->ds_next_snap_obj,
|
|
ds->ds_phys->ds_creation_txg, tx) == 0);
|
|
}
|
|
if (ds->ds_phys->ds_num_children > 1) {
|
|
boolean_t usenext = B_FALSE;
|
|
if (ds->ds_phys->ds_next_clones_obj != 0) {
|
|
uint64_t count;
|
|
/*
|
|
* A bug in a previous version of the code could
|
|
* cause upgrade_clones_cb() to not set
|
|
* ds_next_snap_obj when it should, leading to a
|
|
* missing entry. Therefore we can only use the
|
|
* next_clones_obj when its count is correct.
|
|
*/
|
|
int err = zap_count(dp->dp_meta_objset,
|
|
ds->ds_phys->ds_next_clones_obj, &count);
|
|
if (err == 0 &&
|
|
count == ds->ds_phys->ds_num_children - 1)
|
|
usenext = B_TRUE;
|
|
}
|
|
|
|
if (usenext) {
|
|
VERIFY0(zap_join_key(dp->dp_meta_objset,
|
|
ds->ds_phys->ds_next_clones_obj,
|
|
scn->scn_phys.scn_queue_obj,
|
|
ds->ds_phys->ds_creation_txg, tx));
|
|
} else {
|
|
struct enqueue_clones_arg eca;
|
|
eca.tx = tx;
|
|
eca.originobj = ds->ds_object;
|
|
|
|
VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj,
|
|
enqueue_clones_cb, &eca, DS_FIND_CHILDREN));
|
|
}
|
|
}
|
|
|
|
out:
|
|
dsl_dataset_rele(ds, FTAG);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static int
|
|
enqueue_cb(dsl_pool_t *dp, dsl_dataset_t *hds, void *arg)
|
|
{
|
|
dmu_tx_t *tx = arg;
|
|
dsl_dataset_t *ds;
|
|
int err;
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
|
|
err = dsl_dataset_hold_obj(dp, hds->ds_object, FTAG, &ds);
|
|
if (err)
|
|
return (err);
|
|
|
|
while (ds->ds_phys->ds_prev_snap_obj != 0) {
|
|
dsl_dataset_t *prev;
|
|
err = dsl_dataset_hold_obj(dp, ds->ds_phys->ds_prev_snap_obj,
|
|
FTAG, &prev);
|
|
if (err) {
|
|
dsl_dataset_rele(ds, FTAG);
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
* If this is a clone, we don't need to worry about it for now.
|
|
*/
|
|
if (prev->ds_phys->ds_next_snap_obj != ds->ds_object) {
|
|
dsl_dataset_rele(ds, FTAG);
|
|
dsl_dataset_rele(prev, FTAG);
|
|
return (0);
|
|
}
|
|
dsl_dataset_rele(ds, FTAG);
|
|
ds = prev;
|
|
}
|
|
|
|
VERIFY(zap_add_int_key(dp->dp_meta_objset, scn->scn_phys.scn_queue_obj,
|
|
ds->ds_object, ds->ds_phys->ds_prev_snap_txg, tx) == 0);
|
|
dsl_dataset_rele(ds, FTAG);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Scrub/dedup interaction.
|
|
*
|
|
* If there are N references to a deduped block, we don't want to scrub it
|
|
* N times -- ideally, we should scrub it exactly once.
|
|
*
|
|
* We leverage the fact that the dde's replication class (enum ddt_class)
|
|
* is ordered from highest replication class (DDT_CLASS_DITTO) to lowest
|
|
* (DDT_CLASS_UNIQUE) so that we may walk the DDT in that order.
|
|
*
|
|
* To prevent excess scrubbing, the scrub begins by walking the DDT
|
|
* to find all blocks with refcnt > 1, and scrubs each of these once.
|
|
* Since there are two replication classes which contain blocks with
|
|
* refcnt > 1, we scrub the highest replication class (DDT_CLASS_DITTO) first.
|
|
* Finally the top-down scrub begins, only visiting blocks with refcnt == 1.
|
|
*
|
|
* There would be nothing more to say if a block's refcnt couldn't change
|
|
* during a scrub, but of course it can so we must account for changes
|
|
* in a block's replication class.
|
|
*
|
|
* Here's an example of what can occur:
|
|
*
|
|
* If a block has refcnt > 1 during the DDT scrub phase, but has refcnt == 1
|
|
* when visited during the top-down scrub phase, it will be scrubbed twice.
|
|
* This negates our scrub optimization, but is otherwise harmless.
|
|
*
|
|
* If a block has refcnt == 1 during the DDT scrub phase, but has refcnt > 1
|
|
* on each visit during the top-down scrub phase, it will never be scrubbed.
|
|
* To catch this, ddt_sync_entry() notifies the scrub code whenever a block's
|
|
* reference class transitions to a higher level (i.e DDT_CLASS_UNIQUE to
|
|
* DDT_CLASS_DUPLICATE); if it transitions from refcnt == 1 to refcnt > 1
|
|
* while a scrub is in progress, it scrubs the block right then.
|
|
*/
|
|
static void
|
|
dsl_scan_ddt(dsl_scan_t *scn, dmu_tx_t *tx)
|
|
{
|
|
ddt_bookmark_t *ddb = &scn->scn_phys.scn_ddt_bookmark;
|
|
ddt_entry_t dde;
|
|
int error;
|
|
uint64_t n = 0;
|
|
|
|
bzero(&dde, sizeof (ddt_entry_t));
|
|
|
|
while ((error = ddt_walk(scn->scn_dp->dp_spa, ddb, &dde)) == 0) {
|
|
ddt_t *ddt;
|
|
|
|
if (ddb->ddb_class > scn->scn_phys.scn_ddt_class_max)
|
|
break;
|
|
dprintf("visiting ddb=%llu/%llu/%llu/%llx\n",
|
|
(longlong_t)ddb->ddb_class,
|
|
(longlong_t)ddb->ddb_type,
|
|
(longlong_t)ddb->ddb_checksum,
|
|
(longlong_t)ddb->ddb_cursor);
|
|
|
|
/* There should be no pending changes to the dedup table */
|
|
ddt = scn->scn_dp->dp_spa->spa_ddt[ddb->ddb_checksum];
|
|
ASSERT(avl_first(&ddt->ddt_tree) == NULL);
|
|
|
|
dsl_scan_ddt_entry(scn, ddb->ddb_checksum, &dde, tx);
|
|
n++;
|
|
|
|
if (dsl_scan_check_pause(scn, NULL))
|
|
break;
|
|
}
|
|
|
|
zfs_dbgmsg("scanned %llu ddt entries with class_max = %u; pausing=%u",
|
|
(longlong_t)n, (int)scn->scn_phys.scn_ddt_class_max,
|
|
(int)scn->scn_pausing);
|
|
|
|
ASSERT(error == 0 || error == ENOENT);
|
|
ASSERT(error != ENOENT ||
|
|
ddb->ddb_class > scn->scn_phys.scn_ddt_class_max);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
void
|
|
dsl_scan_ddt_entry(dsl_scan_t *scn, enum zio_checksum checksum,
|
|
ddt_entry_t *dde, dmu_tx_t *tx)
|
|
{
|
|
const ddt_key_t *ddk = &dde->dde_key;
|
|
ddt_phys_t *ddp = dde->dde_phys;
|
|
blkptr_t bp;
|
|
zbookmark_t zb = { 0 };
|
|
int p;
|
|
|
|
if (scn->scn_phys.scn_state != DSS_SCANNING)
|
|
return;
|
|
|
|
for (p = 0; p < DDT_PHYS_TYPES; p++, ddp++) {
|
|
if (ddp->ddp_phys_birth == 0 ||
|
|
ddp->ddp_phys_birth > scn->scn_phys.scn_max_txg)
|
|
continue;
|
|
ddt_bp_create(checksum, ddk, ddp, &bp);
|
|
|
|
scn->scn_visited_this_txg++;
|
|
scan_funcs[scn->scn_phys.scn_func](scn->scn_dp, &bp, &zb);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dsl_scan_visit(dsl_scan_t *scn, dmu_tx_t *tx)
|
|
{
|
|
dsl_pool_t *dp = scn->scn_dp;
|
|
zap_cursor_t *zc;
|
|
zap_attribute_t *za;
|
|
|
|
if (scn->scn_phys.scn_ddt_bookmark.ddb_class <=
|
|
scn->scn_phys.scn_ddt_class_max) {
|
|
scn->scn_phys.scn_cur_min_txg = scn->scn_phys.scn_min_txg;
|
|
scn->scn_phys.scn_cur_max_txg = scn->scn_phys.scn_max_txg;
|
|
dsl_scan_ddt(scn, tx);
|
|
if (scn->scn_pausing)
|
|
return;
|
|
}
|
|
|
|
if (scn->scn_phys.scn_bookmark.zb_objset == DMU_META_OBJSET) {
|
|
/* First do the MOS & ORIGIN */
|
|
|
|
scn->scn_phys.scn_cur_min_txg = scn->scn_phys.scn_min_txg;
|
|
scn->scn_phys.scn_cur_max_txg = scn->scn_phys.scn_max_txg;
|
|
dsl_scan_visit_rootbp(scn, NULL,
|
|
&dp->dp_meta_rootbp, tx);
|
|
spa_set_rootblkptr(dp->dp_spa, &dp->dp_meta_rootbp);
|
|
if (scn->scn_pausing)
|
|
return;
|
|
|
|
if (spa_version(dp->dp_spa) < SPA_VERSION_DSL_SCRUB) {
|
|
VERIFY0(dmu_objset_find_dp(dp, dp->dp_root_dir_obj,
|
|
enqueue_cb, tx, DS_FIND_CHILDREN));
|
|
} else {
|
|
dsl_scan_visitds(scn,
|
|
dp->dp_origin_snap->ds_object, tx);
|
|
}
|
|
ASSERT(!scn->scn_pausing);
|
|
} else if (scn->scn_phys.scn_bookmark.zb_objset !=
|
|
ZB_DESTROYED_OBJSET) {
|
|
/*
|
|
* If we were paused, continue from here. Note if the
|
|
* ds we were paused on was deleted, the zb_objset may
|
|
* be -1, so we will skip this and find a new objset
|
|
* below.
|
|
*/
|
|
dsl_scan_visitds(scn, scn->scn_phys.scn_bookmark.zb_objset, tx);
|
|
if (scn->scn_pausing)
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* In case we were paused right at the end of the ds, zero the
|
|
* bookmark so we don't think that we're still trying to resume.
|
|
*/
|
|
bzero(&scn->scn_phys.scn_bookmark, sizeof (zbookmark_t));
|
|
zc = kmem_alloc(sizeof (zap_cursor_t), KM_PUSHPAGE);
|
|
za = kmem_alloc(sizeof (zap_attribute_t), KM_PUSHPAGE);
|
|
|
|
/* keep pulling things out of the zap-object-as-queue */
|
|
while (zap_cursor_init(zc, dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj),
|
|
zap_cursor_retrieve(zc, za) == 0) {
|
|
dsl_dataset_t *ds;
|
|
uint64_t dsobj;
|
|
|
|
dsobj = strtonum(za->za_name, NULL);
|
|
VERIFY3U(0, ==, zap_remove_int(dp->dp_meta_objset,
|
|
scn->scn_phys.scn_queue_obj, dsobj, tx));
|
|
|
|
/* Set up min/max txg */
|
|
VERIFY3U(0, ==, dsl_dataset_hold_obj(dp, dsobj, FTAG, &ds));
|
|
if (za->za_first_integer != 0) {
|
|
scn->scn_phys.scn_cur_min_txg =
|
|
MAX(scn->scn_phys.scn_min_txg,
|
|
za->za_first_integer);
|
|
} else {
|
|
scn->scn_phys.scn_cur_min_txg =
|
|
MAX(scn->scn_phys.scn_min_txg,
|
|
ds->ds_phys->ds_prev_snap_txg);
|
|
}
|
|
scn->scn_phys.scn_cur_max_txg = dsl_scan_ds_maxtxg(ds);
|
|
dsl_dataset_rele(ds, FTAG);
|
|
|
|
dsl_scan_visitds(scn, dsobj, tx);
|
|
zap_cursor_fini(zc);
|
|
if (scn->scn_pausing)
|
|
goto out;
|
|
}
|
|
zap_cursor_fini(zc);
|
|
out:
|
|
kmem_free(za, sizeof (zap_attribute_t));
|
|
kmem_free(zc, sizeof (zap_cursor_t));
|
|
}
|
|
|
|
static boolean_t
|
|
dsl_scan_free_should_pause(dsl_scan_t *scn)
|
|
{
|
|
uint64_t elapsed_nanosecs;
|
|
|
|
if (zfs_recover)
|
|
return (B_FALSE);
|
|
|
|
elapsed_nanosecs = gethrtime() - scn->scn_sync_start_time;
|
|
return (elapsed_nanosecs / NANOSEC > zfs_txg_timeout ||
|
|
(NSEC2MSEC(elapsed_nanosecs) > zfs_free_min_time_ms &&
|
|
txg_sync_waiting(scn->scn_dp)) ||
|
|
spa_shutting_down(scn->scn_dp->dp_spa));
|
|
}
|
|
|
|
static int
|
|
dsl_scan_free_block_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
|
|
{
|
|
dsl_scan_t *scn = arg;
|
|
|
|
if (!scn->scn_is_bptree ||
|
|
(BP_GET_LEVEL(bp) == 0 && BP_GET_TYPE(bp) != DMU_OT_OBJSET)) {
|
|
if (dsl_scan_free_should_pause(scn))
|
|
return (SET_ERROR(ERESTART));
|
|
}
|
|
|
|
zio_nowait(zio_free_sync(scn->scn_zio_root, scn->scn_dp->dp_spa,
|
|
dmu_tx_get_txg(tx), bp, 0));
|
|
dsl_dir_diduse_space(tx->tx_pool->dp_free_dir, DD_USED_HEAD,
|
|
-bp_get_dsize_sync(scn->scn_dp->dp_spa, bp),
|
|
-BP_GET_PSIZE(bp), -BP_GET_UCSIZE(bp), tx);
|
|
scn->scn_visited_this_txg++;
|
|
return (0);
|
|
}
|
|
|
|
boolean_t
|
|
dsl_scan_active(dsl_scan_t *scn)
|
|
{
|
|
spa_t *spa = scn->scn_dp->dp_spa;
|
|
uint64_t used = 0, comp, uncomp;
|
|
|
|
if (spa->spa_load_state != SPA_LOAD_NONE)
|
|
return (B_FALSE);
|
|
if (spa_shutting_down(spa))
|
|
return (B_FALSE);
|
|
|
|
if (scn->scn_phys.scn_state == DSS_SCANNING ||
|
|
scn->scn_async_destroying)
|
|
return (B_TRUE);
|
|
|
|
if (spa_version(scn->scn_dp->dp_spa) >= SPA_VERSION_DEADLISTS) {
|
|
(void) bpobj_space(&scn->scn_dp->dp_free_bpobj,
|
|
&used, &comp, &uncomp);
|
|
}
|
|
return (used != 0);
|
|
}
|
|
|
|
void
|
|
dsl_scan_sync(dsl_pool_t *dp, dmu_tx_t *tx)
|
|
{
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
spa_t *spa = dp->dp_spa;
|
|
int err;
|
|
|
|
/*
|
|
* Check for scn_restart_txg before checking spa_load_state, so
|
|
* that we can restart an old-style scan while the pool is being
|
|
* imported (see dsl_scan_init).
|
|
*/
|
|
if (scn->scn_restart_txg != 0 &&
|
|
scn->scn_restart_txg <= tx->tx_txg) {
|
|
pool_scan_func_t func = POOL_SCAN_SCRUB;
|
|
dsl_scan_done(scn, B_FALSE, tx);
|
|
if (vdev_resilver_needed(spa->spa_root_vdev, NULL, NULL))
|
|
func = POOL_SCAN_RESILVER;
|
|
zfs_dbgmsg("restarting scan func=%u txg=%llu",
|
|
func, tx->tx_txg);
|
|
dsl_scan_setup_sync(&func, tx);
|
|
}
|
|
|
|
if (!dsl_scan_active(scn) ||
|
|
spa_sync_pass(dp->dp_spa) > 1)
|
|
return;
|
|
|
|
scn->scn_visited_this_txg = 0;
|
|
scn->scn_pausing = B_FALSE;
|
|
scn->scn_sync_start_time = gethrtime();
|
|
spa->spa_scrub_active = B_TRUE;
|
|
|
|
/*
|
|
* First process the free list. If we pause the free, don't do
|
|
* any scanning. This ensures that there is no free list when
|
|
* we are scanning, so the scan code doesn't have to worry about
|
|
* traversing it.
|
|
*/
|
|
if (spa_version(dp->dp_spa) >= SPA_VERSION_DEADLISTS) {
|
|
scn->scn_is_bptree = B_FALSE;
|
|
scn->scn_zio_root = zio_root(dp->dp_spa, NULL,
|
|
NULL, ZIO_FLAG_MUSTSUCCEED);
|
|
err = bpobj_iterate(&dp->dp_free_bpobj,
|
|
dsl_scan_free_block_cb, scn, tx);
|
|
VERIFY3U(0, ==, zio_wait(scn->scn_zio_root));
|
|
|
|
if (err == 0 && spa_feature_is_active(spa,
|
|
&spa_feature_table[SPA_FEATURE_ASYNC_DESTROY])) {
|
|
ASSERT(scn->scn_async_destroying);
|
|
scn->scn_is_bptree = B_TRUE;
|
|
scn->scn_zio_root = zio_root(dp->dp_spa, NULL,
|
|
NULL, ZIO_FLAG_MUSTSUCCEED);
|
|
err = bptree_iterate(dp->dp_meta_objset,
|
|
dp->dp_bptree_obj, B_TRUE, dsl_scan_free_block_cb,
|
|
scn, tx);
|
|
VERIFY0(zio_wait(scn->scn_zio_root));
|
|
|
|
if (err == 0) {
|
|
zfeature_info_t *feat = &spa_feature_table
|
|
[SPA_FEATURE_ASYNC_DESTROY];
|
|
/* finished; deactivate async destroy feature */
|
|
spa_feature_decr(spa, feat, tx);
|
|
ASSERT(!spa_feature_is_active(spa, feat));
|
|
VERIFY0(zap_remove(dp->dp_meta_objset,
|
|
DMU_POOL_DIRECTORY_OBJECT,
|
|
DMU_POOL_BPTREE_OBJ, tx));
|
|
VERIFY0(bptree_free(dp->dp_meta_objset,
|
|
dp->dp_bptree_obj, tx));
|
|
dp->dp_bptree_obj = 0;
|
|
scn->scn_async_destroying = B_FALSE;
|
|
}
|
|
}
|
|
if (scn->scn_visited_this_txg) {
|
|
zfs_dbgmsg("freed %llu blocks in %llums from "
|
|
"free_bpobj/bptree txg %llu",
|
|
(longlong_t)scn->scn_visited_this_txg,
|
|
(longlong_t)
|
|
NSEC2MSEC(gethrtime() - scn->scn_sync_start_time),
|
|
(longlong_t)tx->tx_txg);
|
|
scn->scn_visited_this_txg = 0;
|
|
/*
|
|
* Re-sync the ddt so that we can further modify
|
|
* it when doing bprewrite.
|
|
*/
|
|
ddt_sync(spa, tx->tx_txg);
|
|
}
|
|
if (err == ERESTART)
|
|
return;
|
|
}
|
|
|
|
if (scn->scn_phys.scn_state != DSS_SCANNING)
|
|
return;
|
|
|
|
if (scn->scn_done_txg == tx->tx_txg) {
|
|
ASSERT(!scn->scn_pausing);
|
|
/* finished with scan. */
|
|
zfs_dbgmsg("txg %llu scan complete", tx->tx_txg);
|
|
dsl_scan_done(scn, B_TRUE, tx);
|
|
ASSERT3U(spa->spa_scrub_inflight, ==, 0);
|
|
dsl_scan_sync_state(scn, tx);
|
|
return;
|
|
}
|
|
|
|
if (scn->scn_phys.scn_ddt_bookmark.ddb_class <=
|
|
scn->scn_phys.scn_ddt_class_max) {
|
|
zfs_dbgmsg("doing scan sync txg %llu; "
|
|
"ddt bm=%llu/%llu/%llu/%llx",
|
|
(longlong_t)tx->tx_txg,
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_class,
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_type,
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_checksum,
|
|
(longlong_t)scn->scn_phys.scn_ddt_bookmark.ddb_cursor);
|
|
ASSERT(scn->scn_phys.scn_bookmark.zb_objset == 0);
|
|
ASSERT(scn->scn_phys.scn_bookmark.zb_object == 0);
|
|
ASSERT(scn->scn_phys.scn_bookmark.zb_level == 0);
|
|
ASSERT(scn->scn_phys.scn_bookmark.zb_blkid == 0);
|
|
} else {
|
|
zfs_dbgmsg("doing scan sync txg %llu; bm=%llu/%llu/%llu/%llu",
|
|
(longlong_t)tx->tx_txg,
|
|
(longlong_t)scn->scn_phys.scn_bookmark.zb_objset,
|
|
(longlong_t)scn->scn_phys.scn_bookmark.zb_object,
|
|
(longlong_t)scn->scn_phys.scn_bookmark.zb_level,
|
|
(longlong_t)scn->scn_phys.scn_bookmark.zb_blkid);
|
|
}
|
|
|
|
scn->scn_zio_root = zio_root(dp->dp_spa, NULL,
|
|
NULL, ZIO_FLAG_CANFAIL);
|
|
dsl_pool_config_enter(dp, FTAG);
|
|
dsl_scan_visit(scn, tx);
|
|
dsl_pool_config_exit(dp, FTAG);
|
|
(void) zio_wait(scn->scn_zio_root);
|
|
scn->scn_zio_root = NULL;
|
|
|
|
zfs_dbgmsg("visited %llu blocks in %llums",
|
|
(longlong_t)scn->scn_visited_this_txg,
|
|
(longlong_t)NSEC2MSEC(gethrtime() - scn->scn_sync_start_time));
|
|
|
|
if (!scn->scn_pausing) {
|
|
scn->scn_done_txg = tx->tx_txg + 1;
|
|
zfs_dbgmsg("txg %llu traversal complete, waiting till txg %llu",
|
|
tx->tx_txg, scn->scn_done_txg);
|
|
}
|
|
|
|
if (DSL_SCAN_IS_SCRUB_RESILVER(scn)) {
|
|
mutex_enter(&spa->spa_scrub_lock);
|
|
while (spa->spa_scrub_inflight > 0) {
|
|
cv_wait(&spa->spa_scrub_io_cv,
|
|
&spa->spa_scrub_lock);
|
|
}
|
|
mutex_exit(&spa->spa_scrub_lock);
|
|
}
|
|
|
|
dsl_scan_sync_state(scn, tx);
|
|
}
|
|
|
|
/*
|
|
* This will start a new scan, or restart an existing one.
|
|
*/
|
|
void
|
|
dsl_resilver_restart(dsl_pool_t *dp, uint64_t txg)
|
|
{
|
|
if (txg == 0) {
|
|
dmu_tx_t *tx;
|
|
tx = dmu_tx_create_dd(dp->dp_mos_dir);
|
|
VERIFY(0 == dmu_tx_assign(tx, TXG_WAIT));
|
|
|
|
txg = dmu_tx_get_txg(tx);
|
|
dp->dp_scan->scn_restart_txg = txg;
|
|
dmu_tx_commit(tx);
|
|
} else {
|
|
dp->dp_scan->scn_restart_txg = txg;
|
|
}
|
|
zfs_dbgmsg("restarting resilver txg=%llu", txg);
|
|
}
|
|
|
|
boolean_t
|
|
dsl_scan_resilvering(dsl_pool_t *dp)
|
|
{
|
|
return (dp->dp_scan->scn_phys.scn_state == DSS_SCANNING &&
|
|
dp->dp_scan->scn_phys.scn_func == POOL_SCAN_RESILVER);
|
|
}
|
|
|
|
/*
|
|
* scrub consumers
|
|
*/
|
|
|
|
static void
|
|
count_block(zfs_all_blkstats_t *zab, const blkptr_t *bp)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* If we resume after a reboot, zab will be NULL; don't record
|
|
* incomplete stats in that case.
|
|
*/
|
|
if (zab == NULL)
|
|
return;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
int l = (i < 2) ? BP_GET_LEVEL(bp) : DN_MAX_LEVELS;
|
|
int t = (i & 1) ? BP_GET_TYPE(bp) : DMU_OT_TOTAL;
|
|
int equal;
|
|
zfs_blkstat_t *zb;
|
|
|
|
if (t & DMU_OT_NEWTYPE)
|
|
t = DMU_OT_OTHER;
|
|
|
|
zb = &zab->zab_type[l][t];
|
|
zb->zb_count++;
|
|
zb->zb_asize += BP_GET_ASIZE(bp);
|
|
zb->zb_lsize += BP_GET_LSIZE(bp);
|
|
zb->zb_psize += BP_GET_PSIZE(bp);
|
|
zb->zb_gangs += BP_COUNT_GANG(bp);
|
|
|
|
switch (BP_GET_NDVAS(bp)) {
|
|
case 2:
|
|
if (DVA_GET_VDEV(&bp->blk_dva[0]) ==
|
|
DVA_GET_VDEV(&bp->blk_dva[1]))
|
|
zb->zb_ditto_2_of_2_samevdev++;
|
|
break;
|
|
case 3:
|
|
equal = (DVA_GET_VDEV(&bp->blk_dva[0]) ==
|
|
DVA_GET_VDEV(&bp->blk_dva[1])) +
|
|
(DVA_GET_VDEV(&bp->blk_dva[0]) ==
|
|
DVA_GET_VDEV(&bp->blk_dva[2])) +
|
|
(DVA_GET_VDEV(&bp->blk_dva[1]) ==
|
|
DVA_GET_VDEV(&bp->blk_dva[2]));
|
|
if (equal == 1)
|
|
zb->zb_ditto_2_of_3_samevdev++;
|
|
else if (equal == 3)
|
|
zb->zb_ditto_3_of_3_samevdev++;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
dsl_scan_scrub_done(zio_t *zio)
|
|
{
|
|
spa_t *spa = zio->io_spa;
|
|
|
|
zio_data_buf_free(zio->io_data, zio->io_size);
|
|
|
|
mutex_enter(&spa->spa_scrub_lock);
|
|
spa->spa_scrub_inflight--;
|
|
cv_broadcast(&spa->spa_scrub_io_cv);
|
|
|
|
if (zio->io_error && (zio->io_error != ECKSUM ||
|
|
!(zio->io_flags & ZIO_FLAG_SPECULATIVE))) {
|
|
spa->spa_dsl_pool->dp_scan->scn_phys.scn_errors++;
|
|
}
|
|
mutex_exit(&spa->spa_scrub_lock);
|
|
}
|
|
|
|
static int
|
|
dsl_scan_scrub_cb(dsl_pool_t *dp,
|
|
const blkptr_t *bp, const zbookmark_t *zb)
|
|
{
|
|
dsl_scan_t *scn = dp->dp_scan;
|
|
size_t size = BP_GET_PSIZE(bp);
|
|
spa_t *spa = dp->dp_spa;
|
|
uint64_t phys_birth = BP_PHYSICAL_BIRTH(bp);
|
|
boolean_t needs_io = B_FALSE;
|
|
int zio_flags = ZIO_FLAG_SCAN_THREAD | ZIO_FLAG_RAW | ZIO_FLAG_CANFAIL;
|
|
int scan_delay = 0;
|
|
int d;
|
|
|
|
if (phys_birth <= scn->scn_phys.scn_min_txg ||
|
|
phys_birth >= scn->scn_phys.scn_max_txg)
|
|
return (0);
|
|
|
|
count_block(dp->dp_blkstats, bp);
|
|
|
|
ASSERT(DSL_SCAN_IS_SCRUB_RESILVER(scn));
|
|
if (scn->scn_phys.scn_func == POOL_SCAN_SCRUB) {
|
|
zio_flags |= ZIO_FLAG_SCRUB;
|
|
needs_io = B_TRUE;
|
|
scan_delay = zfs_scrub_delay;
|
|
} else {
|
|
ASSERT3U(scn->scn_phys.scn_func, ==, POOL_SCAN_RESILVER);
|
|
zio_flags |= ZIO_FLAG_RESILVER;
|
|
needs_io = B_FALSE;
|
|
scan_delay = zfs_resilver_delay;
|
|
}
|
|
|
|
/* If it's an intent log block, failure is expected. */
|
|
if (zb->zb_level == ZB_ZIL_LEVEL)
|
|
zio_flags |= ZIO_FLAG_SPECULATIVE;
|
|
|
|
for (d = 0; d < BP_GET_NDVAS(bp); d++) {
|
|
vdev_t *vd = vdev_lookup_top(spa,
|
|
DVA_GET_VDEV(&bp->blk_dva[d]));
|
|
|
|
/*
|
|
* Keep track of how much data we've examined so that
|
|
* zpool(1M) status can make useful progress reports.
|
|
*/
|
|
scn->scn_phys.scn_examined += DVA_GET_ASIZE(&bp->blk_dva[d]);
|
|
spa->spa_scan_pass_exam += DVA_GET_ASIZE(&bp->blk_dva[d]);
|
|
|
|
/* if it's a resilver, this may not be in the target range */
|
|
if (!needs_io) {
|
|
if (DVA_GET_GANG(&bp->blk_dva[d])) {
|
|
/*
|
|
* Gang members may be spread across multiple
|
|
* vdevs, so the best estimate we have is the
|
|
* scrub range, which has already been checked.
|
|
* XXX -- it would be better to change our
|
|
* allocation policy to ensure that all
|
|
* gang members reside on the same vdev.
|
|
*/
|
|
needs_io = B_TRUE;
|
|
} else {
|
|
needs_io = vdev_dtl_contains(vd, DTL_PARTIAL,
|
|
phys_birth, 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (needs_io && !zfs_no_scrub_io) {
|
|
vdev_t *rvd = spa->spa_root_vdev;
|
|
uint64_t maxinflight = rvd->vdev_children * zfs_top_maxinflight;
|
|
void *data = zio_data_buf_alloc(size);
|
|
|
|
mutex_enter(&spa->spa_scrub_lock);
|
|
while (spa->spa_scrub_inflight >= maxinflight)
|
|
cv_wait(&spa->spa_scrub_io_cv, &spa->spa_scrub_lock);
|
|
spa->spa_scrub_inflight++;
|
|
mutex_exit(&spa->spa_scrub_lock);
|
|
|
|
/*
|
|
* If we're seeing recent (zfs_scan_idle) "important" I/Os
|
|
* then throttle our workload to limit the impact of a scan.
|
|
*/
|
|
if (ddi_get_lbolt64() - spa->spa_last_io <= zfs_scan_idle)
|
|
delay(scan_delay);
|
|
|
|
zio_nowait(zio_read(NULL, spa, bp, data, size,
|
|
dsl_scan_scrub_done, NULL, ZIO_PRIORITY_SCRUB,
|
|
zio_flags, zb));
|
|
}
|
|
|
|
/* do not relocate this block */
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
dsl_scan(dsl_pool_t *dp, pool_scan_func_t func)
|
|
{
|
|
spa_t *spa = dp->dp_spa;
|
|
|
|
/*
|
|
* Purge all vdev caches and probe all devices. We do this here
|
|
* rather than in sync context because this requires a writer lock
|
|
* on the spa_config lock, which we can't do from sync context. The
|
|
* spa_scrub_reopen flag indicates that vdev_open() should not
|
|
* attempt to start another scrub.
|
|
*/
|
|
spa_vdev_state_enter(spa, SCL_NONE);
|
|
spa->spa_scrub_reopen = B_TRUE;
|
|
vdev_reopen(spa->spa_root_vdev);
|
|
spa->spa_scrub_reopen = B_FALSE;
|
|
(void) spa_vdev_state_exit(spa, NULL, 0);
|
|
|
|
return (dsl_sync_task(spa_name(spa), dsl_scan_setup_check,
|
|
dsl_scan_setup_sync, &func, 0));
|
|
}
|
|
|
|
#if defined(_KERNEL) && defined(HAVE_SPL)
|
|
module_param(zfs_top_maxinflight, int, 0644);
|
|
MODULE_PARM_DESC(zfs_top_maxinflight, "Max I/Os per top-level");
|
|
|
|
module_param(zfs_resilver_delay, int, 0644);
|
|
MODULE_PARM_DESC(zfs_resilver_delay, "Number of ticks to delay resilver");
|
|
|
|
module_param(zfs_scrub_delay, int, 0644);
|
|
MODULE_PARM_DESC(zfs_scrub_delay, "Number of ticks to delay scrub");
|
|
|
|
module_param(zfs_scan_idle, int, 0644);
|
|
MODULE_PARM_DESC(zfs_scan_idle, "Idle window in clock ticks");
|
|
|
|
module_param(zfs_scan_min_time_ms, int, 0644);
|
|
MODULE_PARM_DESC(zfs_scan_min_time_ms, "Min millisecs to scrub per txg");
|
|
|
|
module_param(zfs_free_min_time_ms, int, 0644);
|
|
MODULE_PARM_DESC(zfs_free_min_time_ms, "Min millisecs to free per txg");
|
|
|
|
module_param(zfs_resilver_min_time_ms, int, 0644);
|
|
MODULE_PARM_DESC(zfs_resilver_min_time_ms, "Min millisecs to resilver per txg");
|
|
|
|
module_param(zfs_no_scrub_io, int, 0644);
|
|
MODULE_PARM_DESC(zfs_no_scrub_io, "Set to disable scrub I/O");
|
|
|
|
module_param(zfs_no_scrub_prefetch, int, 0644);
|
|
MODULE_PARM_DESC(zfs_no_scrub_prefetch, "Set to disable scrub prefetching");
|
|
#endif
|