c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2025-02-06 15:23:20 +03:00
Code Issues Packages Projects Releases Wiki Activity
3ee56c292b
mirror_zfs/scripts/zpool-config/Makefile.in
Brian Behlendorf 0ee8118bd3 Add zfault zpool configurations and tests 
Eleven new zpool configurations were added to allow testing of various
failure cases.  The first 5 zpool configurations leverage the 'faulty'
md device type which allow us to simuluate IO errors at the block layer.
The last 6 zpool configurations leverage the scsi_debug module provided
by modern kernels.  This device allows you to create virtual scsi
devices which are backed by a ram disk.  With this setup we can verify
the full IO stack by injecting faults at the lowest layer.  Both methods
of fault injection are important to verifying the IO stack.

The zfs code itself also provides a mechanism for error injection
via the zinject command line tool.  While we should also take advantage
of this appraoch to validate the code it does not address any of the
Linux integration issues which are the most concerning.  For the
moment we're trusting that the upstream Solaris guys are running
zinject and would have caught internal zfs logic errors.

Currently, there are 6 r/w test cases layered on top of the 'faulty'
md devices.  They include 3 writes tests for soft/transient errors,
hard/permenant errors, and all writes error to the device.  There
are 3 matching read tests for soft/transient errors, hard/permenant
errors, and fixable read error with a write.  Although for this last
case zfs doesn't do anything special.

The seventh test case verifies zfs detects and corrects checksum
errors.  In this case one of the drives is extensively damaged and
by dd'ing over large sections of it.  We then ensure zfs logs the
issue and correctly rebuilds the damage.

The next  test cases use the scsi_debug configuration to injects error
at the bottom of the scsi stack.  This ensures we find any flaws in the
scsi midlayer or our usage of it.  Plus it stresses the device specific
retry, timeout, and error handling outside of zfs's control.

The eighth test case is to verify that the system correctly handles an
intermittent device timeout.  Here the scsi_debug device drops 1 in N
requests resulting in a retry either at the block level.  The ZFS code
does specify the FAILFAST option but it turns out that for this case
the Linux IO stack with still retry the command.  The FAILFAST logic
located in scsi_noretry_cmd() does no seem to apply to the simply
timeout case.  It appears to be more targeted to specific device or
transport errors from the lower layers.

The ninth test case handles a persistent failure in which the device
is removed from the system by Linux.  The test verifies that the failure
is detected, the device is made unavailable, and then can be successfully
re-add when brought back online.  Additionally, it ensures that errors
and events are logged to the correct places and the no data corruption
has occured due to the failure.
2010-10-12 15:20:03 -07:00

557 lines
17 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = scripts/zpool-config
DIST_COMMON = $(dist_pkglibexec_SCRIPTS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libshare.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/zfs_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(pkglibexecdir)"
SCRIPTS = $(dist_pkglibexec_SCRIPTS)
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
pkglibexecdir = $(libexecdir)/@PACKAGE@/zpool-config
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
dist_pkglibexec_SCRIPTS = \
$(top_srcdir)/scripts/zpool-config/dm0-raid0.sh \
$(top_srcdir)/scripts/zpool-config/dragon-raid0-1x70.sh \
$(top_srcdir)/scripts/zpool-config/dragon-raid10-35x2.sh \
$(top_srcdir)/scripts/zpool-config/dragon-raidz2-7x10.sh \
$(top_srcdir)/scripts/zpool-config/dragon-raidz-7x10.sh \
$(top_srcdir)/scripts/zpool-config/file-raid0.sh \
$(top_srcdir)/scripts/zpool-config/file-raid10.sh \
$(top_srcdir)/scripts/zpool-config/file-raidz2.sh \
$(top_srcdir)/scripts/zpool-config/file-raidz.sh \
$(top_srcdir)/scripts/zpool-config/hda-raid0.sh \
$(top_srcdir)/scripts/zpool-config/lo-raid0.sh \
$(top_srcdir)/scripts/zpool-config/lo-raid10.sh \
$(top_srcdir)/scripts/zpool-config/lo-raidz2.sh \
$(top_srcdir)/scripts/zpool-config/lo-raidz.sh \
$(top_srcdir)/scripts/zpool-config/lo-faulty-raid0.sh \
$(top_srcdir)/scripts/zpool-config/lo-faulty-raid10.sh \
$(top_srcdir)/scripts/zpool-config/lo-faulty-raidz.sh \
$(top_srcdir)/scripts/zpool-config/lo-faulty-raidz2.sh \
$(top_srcdir)/scripts/zpool-config/lo-faulty-raidz3.sh \
$(top_srcdir)/scripts/zpool-config/md0-raid10.sh \
$(top_srcdir)/scripts/zpool-config/md0-raid5.sh \
$(top_srcdir)/scripts/zpool-config/ram0-raid0.sh \
$(top_srcdir)/scripts/zpool-config/scsi_debug-noraid.sh \
$(top_srcdir)/scripts/zpool-config/scsi_debug-raid0.sh \
$(top_srcdir)/scripts/zpool-config/scsi_debug-raid10.sh \
$(top_srcdir)/scripts/zpool-config/scsi_debug-raidz.sh \
$(top_srcdir)/scripts/zpool-config/scsi_debug-raidz2.sh \
$(top_srcdir)/scripts/zpool-config/scsi_debug-raidz3.sh \
$(top_srcdir)/scripts/zpool-config/sda-raid0.sh \
$(top_srcdir)/scripts/zpool-config/supermicro-raid0-1x16.sh \
$(top_srcdir)/scripts/zpool-config/supermicro-raid10-8x2.sh \
$(top_srcdir)/scripts/zpool-config/supermicro-raidz2-4x4.sh \
$(top_srcdir)/scripts/zpool-config/supermicro-raidz-4x4.sh \
$(top_srcdir)/scripts/zpool-config/x4550-raid0-1x48.sh \
$(top_srcdir)/scripts/zpool-config/x4550-raid10-24x2.sh \
$(top_srcdir)/scripts/zpool-config/x4550-raidz2-8x6.sh \
$(top_srcdir)/scripts/zpool-config/x4550-raidz-8x6.sh
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu scripts/zpool-config/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu scripts/zpool-config/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-dist_pkglibexecSCRIPTS: $(dist_pkglibexec_SCRIPTS)
@$(NORMAL_INSTALL)
test -z "$(pkglibexecdir)" || $(MKDIR_P) "$(DESTDIR)$(pkglibexecdir)"
@list='$(dist_pkglibexec_SCRIPTS)'; test -n "$(pkglibexecdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) { files[d] = files[d] " " $$1; \
if (++n[d] == $(am__install_max)) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $$4, $$1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(pkglibexecdir)$$dir'"; \
$(INSTALL_SCRIPT) $$files "$(DESTDIR)$(pkglibexecdir)$$dir" || exit $$?; \
} \
; done
uninstall-dist_pkglibexecSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(dist_pkglibexec_SCRIPTS)'; test -n "$(pkglibexecdir)" || exit 0; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 's,.*/,,;$(transform)'`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(pkglibexecdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(pkglibexecdir)" && rm -f $$files
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(SCRIPTS)
installdirs:
for dir in "$(DESTDIR)$(pkglibexecdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-dist_pkglibexecSCRIPTS
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-dist_pkglibexecSCRIPTS
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dist_pkglibexecSCRIPTS \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
ps ps-am uninstall uninstall-am \
uninstall-dist_pkglibexecSCRIPTS
all:
@list='$(dist_pkglibexec_SCRIPTS)'; \
for file in $$list; do \
link=$$(basename $$file); \
if [ ! -e $$link ]; then \
$(LN_S) $$file $$link; \
fi \
done
clean:
@list='$(dist_pkglibexec_SCRIPTS)'; \
for file in $$list; do \
link=$$(basename $$file); \
if [ -L $$link ]; then \
$(RM) $$link; \
fi \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink