mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-28 03:49:38 +03:00
d441e85dd7
While the autoexpand property may seem like a small feature it depends on a significant amount of system infrastructure. Enough of that infrastructure is now in place that with a few modifications for Linux it can be supported. Auto-expand works as follows; when a block device is modified (re-sized, closed after being open r/w, etc) a change uevent is generated for udev. The ZED, which is monitoring udev events, passes the change event along to zfs_deliver_dle() if the disk or partition contains a zfs_member as identified by blkid. From here the device is matched against all imported pool vdevs using the vdev_guid which was read from the label by blkid. If a match is found the ZED reopens the pool vdev. This re-opening is important because it allows the vdev to be briefly closed so the disk partition table can be re-read. Otherwise, it wouldn't be possible to report the maximum possible expansion size. Finally, if the property autoexpand=on a vdev expansion will be attempted. After performing some sanity checks on the disk to verify that it is safe to expand, the primary partition (-part1) will be expanded and the partition table updated. The partition is then re-opened (again) to detect the updated size which allows the new capacity to be used. In order to make all of the above possible the following changes were required: * Updated the zpool_expand_001_pos and zpool_expand_003_pos tests. These tests now create a pool which is layered on a loopback, scsi_debug, and file vdev. This allows for testing of non- partitioned block device (loopback), a partition block device (scsi_debug), and a file which does not receive udev change events. This provided for better test coverage, and by removing the layering on ZFS volumes there issues surrounding layering one pool on another are avoided. * zpool_find_vdev_by_physpath() updated to accept a vdev guid. This allows for matching by guid rather than path which is a more reliable way for the ZED to reference a vdev. * Fixed zfs_zevent_wait() signal handling which could result in the ZED spinning when a signal was not handled. * Removed vdev_disk_rrpart() functionality which can be abandoned in favor of kernel provided blkdev_reread_part() function. * Added a rwlock which is held as a writer while a disk is being reopened. This is important to prevent errors from occurring for any configuration related IOs which bypass the SCL_ZIO lock. The zpool_reopen_007_pos.ksh test case was added to verify IO error are never observed when reopening. This is not expected to impact IO performance. Additional fixes which aren't critical but were discovered and resolved in the course of developing this functionality. * Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for ZFS volumes. This is as good as a unique physical path, while the volumes are not used in the test cases anymore for other reasons this improvement was included. Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Signed-off-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #120 Closes #2437 Closes #5771 Closes #7366 Closes #7582 Closes #7629
675 lines
18 KiB
Plaintext
675 lines
18 KiB
Plaintext
dnl #
|
|
dnl # Default ZFS kernel configuration
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [
|
|
ZFS_AC_KERNEL
|
|
ZFS_AC_QAT
|
|
ZFS_AC_TEST_MODULE
|
|
ZFS_AC_KERNEL_MISC_MINOR
|
|
ZFS_AC_KERNEL_OBJTOOL
|
|
ZFS_AC_KERNEL_CONFIG
|
|
ZFS_AC_KERNEL_CTL_NAME
|
|
ZFS_AC_KERNEL_PDE_DATA
|
|
ZFS_AC_KERNEL_SET_FS_PWD_WITH_CONST
|
|
ZFS_AC_KERNEL_2ARGS_VFS_FSYNC
|
|
ZFS_AC_KERNEL_FS_STRUCT_SPINLOCK
|
|
ZFS_AC_KERNEL_KUIDGID_T
|
|
ZFS_AC_KERNEL_FALLOCATE
|
|
ZFS_AC_KERNEL_2ARGS_ZLIB_DEFLATE_WORKSPACESIZE
|
|
ZFS_AC_KERNEL_RWSEM_SPINLOCK_IS_RAW
|
|
ZFS_AC_KERNEL_RWSEM_ACTIVITY
|
|
ZFS_AC_KERNEL_RWSEM_ATOMIC_LONG_COUNT
|
|
ZFS_AC_KERNEL_SCHED_RT_HEADER
|
|
ZFS_AC_KERNEL_SCHED_SIGNAL_HEADER
|
|
ZFS_AC_KERNEL_IO_SCHEDULE_TIMEOUT
|
|
ZFS_AC_KERNEL_4ARGS_VFS_GETATTR
|
|
ZFS_AC_KERNEL_3ARGS_VFS_GETATTR
|
|
ZFS_AC_KERNEL_2ARGS_VFS_GETATTR
|
|
ZFS_AC_KERNEL_USLEEP_RANGE
|
|
ZFS_AC_KERNEL_KMEM_CACHE_ALLOCFLAGS
|
|
ZFS_AC_KERNEL_KMEM_CACHE_CREATE_USERCOPY
|
|
ZFS_AC_KERNEL_WAIT_ON_BIT
|
|
ZFS_AC_KERNEL_WAIT_QUEUE_ENTRY_T
|
|
ZFS_AC_KERNEL_WAIT_QUEUE_HEAD_ENTRY
|
|
ZFS_AC_KERNEL_INODE_TIMES
|
|
ZFS_AC_KERNEL_INODE_LOCK
|
|
ZFS_AC_KERNEL_GROUP_INFO_GID
|
|
ZFS_AC_KERNEL_WRITE
|
|
ZFS_AC_KERNEL_READ
|
|
ZFS_AC_KERNEL_TIMER_FUNCTION_TIMER_LIST
|
|
ZFS_AC_KERNEL_DECLARE_EVENT_CLASS
|
|
ZFS_AC_KERNEL_CURRENT_BIO_TAIL
|
|
ZFS_AC_KERNEL_SUPER_USER_NS
|
|
ZFS_AC_KERNEL_SUBMIT_BIO
|
|
ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS_CHECK_EVENTS
|
|
ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS_RELEASE_VOID
|
|
ZFS_AC_KERNEL_TYPE_FMODE_T
|
|
ZFS_AC_KERNEL_BLKDEV_GET_BY_PATH
|
|
ZFS_AC_KERNEL_BLKDEV_REREAD_PART
|
|
ZFS_AC_KERNEL_OPEN_BDEV_EXCLUSIVE
|
|
ZFS_AC_KERNEL_LOOKUP_BDEV
|
|
ZFS_AC_KERNEL_INVALIDATE_BDEV_ARGS
|
|
ZFS_AC_KERNEL_BDEV_LOGICAL_BLOCK_SIZE
|
|
ZFS_AC_KERNEL_BDEV_PHYSICAL_BLOCK_SIZE
|
|
ZFS_AC_KERNEL_BIO_BVEC_ITER
|
|
ZFS_AC_KERNEL_BIO_FAILFAST_DTD
|
|
ZFS_AC_KERNEL_BIO_SET_DEV
|
|
ZFS_AC_KERNEL_REQ_FAILFAST_MASK
|
|
ZFS_AC_KERNEL_REQ_OP_DISCARD
|
|
ZFS_AC_KERNEL_REQ_OP_SECURE_ERASE
|
|
ZFS_AC_KERNEL_REQ_OP_FLUSH
|
|
ZFS_AC_KERNEL_BIO_BI_OPF
|
|
ZFS_AC_KERNEL_BIO_END_IO_T_ARGS
|
|
ZFS_AC_KERNEL_BIO_BI_STATUS
|
|
ZFS_AC_KERNEL_BIO_RW_BARRIER
|
|
ZFS_AC_KERNEL_BIO_RW_DISCARD
|
|
ZFS_AC_KERNEL_BLK_QUEUE_BDI
|
|
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_CLEAR
|
|
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_SET
|
|
ZFS_AC_KERNEL_BLK_QUEUE_FLUSH
|
|
ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS
|
|
ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS
|
|
ZFS_AC_KERNEL_BLK_QUEUE_HAVE_BIO_RW_UNPLUG
|
|
ZFS_AC_KERNEL_BLK_QUEUE_HAVE_BLK_PLUG
|
|
ZFS_AC_KERNEL_GET_DISK_AND_MODULE
|
|
ZFS_AC_KERNEL_GET_DISK_RO
|
|
ZFS_AC_KERNEL_HAVE_BIO_SET_OP_ATTRS
|
|
ZFS_AC_KERNEL_GENERIC_READLINK_GLOBAL
|
|
ZFS_AC_KERNEL_DISCARD_GRANULARITY
|
|
ZFS_AC_KERNEL_CONST_XATTR_HANDLER
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_NAME
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_GET
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_SET
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_LIST
|
|
ZFS_AC_KERNEL_INODE_OWNER_OR_CAPABLE
|
|
ZFS_AC_KERNEL_POSIX_ACL_FROM_XATTR_USERNS
|
|
ZFS_AC_KERNEL_POSIX_ACL_RELEASE
|
|
ZFS_AC_KERNEL_SET_CACHED_ACL_USABLE
|
|
ZFS_AC_KERNEL_POSIX_ACL_CHMOD
|
|
ZFS_AC_KERNEL_POSIX_ACL_EQUIV_MODE_WANTS_UMODE_T
|
|
ZFS_AC_KERNEL_POSIX_ACL_VALID_WITH_NS
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_PERMISSION
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_PERMISSION_WITH_NAMEIDATA
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_CHECK_ACL
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_CHECK_ACL_WITH_FLAGS
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_GET_ACL
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_SET_ACL
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_GETATTR
|
|
ZFS_AC_KERNEL_INODE_SET_FLAGS
|
|
ZFS_AC_KERNEL_INODE_SET_IVERSION
|
|
ZFS_AC_KERNEL_GET_ACL_HANDLE_CACHE
|
|
ZFS_AC_KERNEL_SHOW_OPTIONS
|
|
ZFS_AC_KERNEL_FILE_INODE
|
|
ZFS_AC_KERNEL_FILE_DENTRY
|
|
ZFS_AC_KERNEL_FSYNC
|
|
ZFS_AC_KERNEL_EVICT_INODE
|
|
ZFS_AC_KERNEL_DIRTY_INODE_WITH_FLAGS
|
|
ZFS_AC_KERNEL_NR_CACHED_OBJECTS
|
|
ZFS_AC_KERNEL_FREE_CACHED_OBJECTS
|
|
ZFS_AC_KERNEL_FALLOCATE
|
|
ZFS_AC_KERNEL_AIO_FSYNC
|
|
ZFS_AC_KERNEL_MKDIR_UMODE_T
|
|
ZFS_AC_KERNEL_LOOKUP_NAMEIDATA
|
|
ZFS_AC_KERNEL_CREATE_NAMEIDATA
|
|
ZFS_AC_KERNEL_GET_LINK
|
|
ZFS_AC_KERNEL_PUT_LINK
|
|
ZFS_AC_KERNEL_TMPFILE
|
|
ZFS_AC_KERNEL_TRUNCATE_RANGE
|
|
ZFS_AC_KERNEL_AUTOMOUNT
|
|
ZFS_AC_KERNEL_ENCODE_FH_WITH_INODE
|
|
ZFS_AC_KERNEL_COMMIT_METADATA
|
|
ZFS_AC_KERNEL_CLEAR_INODE
|
|
ZFS_AC_KERNEL_SETATTR_PREPARE
|
|
ZFS_AC_KERNEL_INSERT_INODE_LOCKED
|
|
ZFS_AC_KERNEL_D_MAKE_ROOT
|
|
ZFS_AC_KERNEL_D_OBTAIN_ALIAS
|
|
ZFS_AC_KERNEL_D_PRUNE_ALIASES
|
|
ZFS_AC_KERNEL_D_SET_D_OP
|
|
ZFS_AC_KERNEL_D_REVALIDATE_NAMEIDATA
|
|
ZFS_AC_KERNEL_CONST_DENTRY_OPERATIONS
|
|
ZFS_AC_KERNEL_TRUNCATE_SETSIZE
|
|
ZFS_AC_KERNEL_6ARGS_SECURITY_INODE_INIT_SECURITY
|
|
ZFS_AC_KERNEL_CALLBACK_SECURITY_INODE_INIT_SECURITY
|
|
ZFS_AC_KERNEL_FST_MOUNT
|
|
ZFS_AC_KERNEL_SHRINK
|
|
ZFS_AC_KERNEL_SHRINK_CONTROL_HAS_NID
|
|
ZFS_AC_KERNEL_SHRINK_CONTROL_STRUCT
|
|
ZFS_AC_KERNEL_SHRINKER_CALLBACK
|
|
ZFS_AC_KERNEL_S_INSTANCES_LIST_HEAD
|
|
ZFS_AC_KERNEL_S_D_OP
|
|
ZFS_AC_KERNEL_BDI
|
|
ZFS_AC_KERNEL_SET_NLINK
|
|
ZFS_AC_KERNEL_ELEVATOR_CHANGE
|
|
ZFS_AC_KERNEL_5ARG_SGET
|
|
ZFS_AC_KERNEL_LSEEK_EXECUTE
|
|
ZFS_AC_KERNEL_VFS_ITERATE
|
|
ZFS_AC_KERNEL_VFS_RW_ITERATE
|
|
ZFS_AC_KERNEL_GENERIC_WRITE_CHECKS
|
|
ZFS_AC_KERNEL_KMAP_ATOMIC_ARGS
|
|
ZFS_AC_KERNEL_FOLLOW_DOWN_ONE
|
|
ZFS_AC_KERNEL_MAKE_REQUEST_FN
|
|
ZFS_AC_KERNEL_GENERIC_IO_ACCT_3ARG
|
|
ZFS_AC_KERNEL_GENERIC_IO_ACCT_4ARG
|
|
ZFS_AC_KERNEL_FPU
|
|
ZFS_AC_KERNEL_KUID_HELPERS
|
|
ZFS_AC_KERNEL_MODULE_PARAM_CALL_CONST
|
|
ZFS_AC_KERNEL_RENAME_WANTS_FLAGS
|
|
ZFS_AC_KERNEL_HAVE_GENERIC_SETXATTR
|
|
ZFS_AC_KERNEL_CURRENT_TIME
|
|
ZFS_AC_KERNEL_GLOBAL_PAGE_STATE
|
|
ZFS_AC_KERNEL_ACL_HAS_REFCOUNT
|
|
ZFS_AC_KERNEL_USERNS_CAPABILITIES
|
|
|
|
AS_IF([test "$LINUX_OBJ" != "$LINUX"], [
|
|
KERNEL_MAKE="$KERNEL_MAKE O=$LINUX_OBJ"
|
|
])
|
|
|
|
AC_SUBST(KERNEL_MAKE)
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect name used for Module.symvers file in kernel
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [
|
|
modpost=$LINUX/scripts/Makefile.modpost
|
|
AC_MSG_CHECKING([kernel file name for module symbols])
|
|
AS_IF([test "x$enable_linux_builtin" != xyes -a -f "$modpost"], [
|
|
AS_IF([grep -q Modules.symvers $modpost], [
|
|
LINUX_SYMBOLS=Modules.symvers
|
|
], [
|
|
LINUX_SYMBOLS=Module.symvers
|
|
])
|
|
|
|
AS_IF([test ! -f "$LINUX_OBJ/$LINUX_SYMBOLS"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the kernel devel package for your distribution
|
|
*** is installed. If you are building with a custom kernel, make sure the
|
|
*** kernel is configured, built, and the '--with-linux=PATH' configure
|
|
*** option refers to the location of the kernel source.])
|
|
])
|
|
], [
|
|
LINUX_SYMBOLS=NONE
|
|
])
|
|
AC_MSG_RESULT($LINUX_SYMBOLS)
|
|
AC_SUBST(LINUX_SYMBOLS)
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect the kernel to be built against
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL], [
|
|
AC_ARG_WITH([linux],
|
|
AS_HELP_STRING([--with-linux=PATH],
|
|
[Path to kernel source]),
|
|
[kernelsrc="$withval"])
|
|
|
|
AC_ARG_WITH(linux-obj,
|
|
AS_HELP_STRING([--with-linux-obj=PATH],
|
|
[Path to kernel build objects]),
|
|
[kernelbuild="$withval"])
|
|
|
|
AC_MSG_CHECKING([kernel source directory])
|
|
AS_IF([test -z "$kernelsrc"], [
|
|
AS_IF([test -e "/lib/modules/$(uname -r)/source"], [
|
|
headersdir="/lib/modules/$(uname -r)/source"
|
|
sourcelink=$(readlink -f "$headersdir")
|
|
], [test -e "/lib/modules/$(uname -r)/build"], [
|
|
headersdir="/lib/modules/$(uname -r)/build"
|
|
sourcelink=$(readlink -f "$headersdir")
|
|
], [
|
|
sourcelink=$(ls -1d /usr/src/kernels/* \
|
|
/usr/src/linux-* \
|
|
2>/dev/null | grep -v obj | tail -1)
|
|
])
|
|
|
|
AS_IF([test -n "$sourcelink" && test -e ${sourcelink}], [
|
|
kernelsrc=`readlink -f ${sourcelink}`
|
|
], [
|
|
kernelsrc="[Not found]"
|
|
])
|
|
], [
|
|
AS_IF([test "$kernelsrc" = "NONE"], [
|
|
kernsrcver=NONE
|
|
])
|
|
withlinux=yes
|
|
])
|
|
|
|
AC_MSG_RESULT([$kernelsrc])
|
|
AS_IF([test ! -d "$kernelsrc"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the kernel devel package for your distribution
|
|
*** is installed and then try again. If that fails, you can specify the
|
|
*** location of the kernel source with the '--with-linux=PATH' option.])
|
|
])
|
|
|
|
AC_MSG_CHECKING([kernel build directory])
|
|
AS_IF([test -z "$kernelbuild"], [
|
|
AS_IF([test x$withlinux != xyes -a -e "/lib/modules/$(uname -r)/build"], [
|
|
kernelbuild=`readlink -f /lib/modules/$(uname -r)/build`
|
|
], [test -d ${kernelsrc}-obj/${target_cpu}/${target_cpu}], [
|
|
kernelbuild=${kernelsrc}-obj/${target_cpu}/${target_cpu}
|
|
], [test -d ${kernelsrc}-obj/${target_cpu}/default], [
|
|
kernelbuild=${kernelsrc}-obj/${target_cpu}/default
|
|
], [test -d `dirname ${kernelsrc}`/build-${target_cpu}], [
|
|
kernelbuild=`dirname ${kernelsrc}`/build-${target_cpu}
|
|
], [
|
|
kernelbuild=${kernelsrc}
|
|
])
|
|
])
|
|
AC_MSG_RESULT([$kernelbuild])
|
|
|
|
AC_MSG_CHECKING([kernel source version])
|
|
utsrelease1=$kernelbuild/include/linux/version.h
|
|
utsrelease2=$kernelbuild/include/linux/utsrelease.h
|
|
utsrelease3=$kernelbuild/include/generated/utsrelease.h
|
|
AS_IF([test -r $utsrelease1 && fgrep -q UTS_RELEASE $utsrelease1], [
|
|
utsrelease=linux/version.h
|
|
], [test -r $utsrelease2 && fgrep -q UTS_RELEASE $utsrelease2], [
|
|
utsrelease=linux/utsrelease.h
|
|
], [test -r $utsrelease3 && fgrep -q UTS_RELEASE $utsrelease3], [
|
|
utsrelease=generated/utsrelease.h
|
|
])
|
|
|
|
AS_IF([test "$utsrelease"], [
|
|
kernsrcver=`(echo "#include <$utsrelease>";
|
|
echo "kernsrcver=UTS_RELEASE") |
|
|
cpp -I $kernelbuild/include |
|
|
grep "^kernsrcver=" | cut -d \" -f 2`
|
|
|
|
AS_IF([test -z "$kernsrcver"], [
|
|
AC_MSG_RESULT([Not found])
|
|
AC_MSG_ERROR([*** Cannot determine kernel version.])
|
|
])
|
|
], [
|
|
AC_MSG_RESULT([Not found])
|
|
if test "x$enable_linux_builtin" != xyes; then
|
|
AC_MSG_ERROR([*** Cannot find UTS_RELEASE definition.])
|
|
else
|
|
AC_MSG_ERROR([
|
|
*** Cannot find UTS_RELEASE definition.
|
|
*** Please run 'make prepare' inside the kernel source tree.])
|
|
fi
|
|
])
|
|
|
|
AC_MSG_RESULT([$kernsrcver])
|
|
|
|
LINUX=${kernelsrc}
|
|
LINUX_OBJ=${kernelbuild}
|
|
LINUX_VERSION=${kernsrcver}
|
|
|
|
AC_SUBST(LINUX)
|
|
AC_SUBST(LINUX_OBJ)
|
|
AC_SUBST(LINUX_VERSION)
|
|
|
|
ZFS_AC_MODULE_SYMVERS
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect the QAT module to be built against
|
|
dnl # QAT provides hardware acceleration for data compression:
|
|
dnl # https://01.org/intel-quickassist-technology
|
|
dnl # * Download and install QAT driver from the above link
|
|
dnl # * Start QAT driver in your system:
|
|
dnl # service qat_service start
|
|
dnl # * Enable QAT in ZFS, e.g.:
|
|
dnl # ./configure --with-qat=<qat-driver-path>/QAT1.6
|
|
dnl # make
|
|
dnl # * Set GZIP compression in ZFS dataset:
|
|
dnl # zfs set compression = gzip <dataset>
|
|
dnl # Then the data written to this ZFS pool is compressed
|
|
dnl # by QAT accelerator automatically, and de-compressed by
|
|
dnl # QAT when read from the pool.
|
|
dnl # * Get QAT hardware statistics by:
|
|
dnl # cat /proc/icp_dh895xcc_dev/qat
|
|
dnl # * To disable QAT:
|
|
dnl # insmod zfs.ko zfs_qat_disable=1
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_QAT], [
|
|
AC_ARG_WITH([qat],
|
|
AS_HELP_STRING([--with-qat=PATH],
|
|
[Path to qat source]),
|
|
AS_IF([test "$withval" = "yes"],
|
|
AC_MSG_ERROR([--with-qat=PATH requires a PATH]),
|
|
[qatsrc="$withval"]))
|
|
|
|
AC_ARG_WITH([qat-obj],
|
|
AS_HELP_STRING([--with-qat-obj=PATH],
|
|
[Path to qat build objects]),
|
|
[qatbuild="$withval"])
|
|
|
|
AS_IF([test ! -z "${qatsrc}"], [
|
|
AC_MSG_CHECKING([qat source directory])
|
|
AC_MSG_RESULT([$qatsrc])
|
|
QAT_SRC="${qatsrc}/quickassist"
|
|
AS_IF([ test ! -e "$QAT_SRC/include/cpa.h"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the qat driver package is installed
|
|
*** and specify the location of the qat source with the
|
|
*** '--with-qat=PATH' option then try again. Failed to
|
|
*** find cpa.h in:
|
|
${QAT_SRC}/include])
|
|
])
|
|
])
|
|
|
|
AS_IF([test ! -z "${qatsrc}"], [
|
|
AC_MSG_CHECKING([qat build directory])
|
|
AS_IF([test -z "$qatbuild"], [
|
|
qatbuild="${qatsrc}/build"
|
|
])
|
|
|
|
AC_MSG_RESULT([$qatbuild])
|
|
QAT_OBJ=${qatbuild}
|
|
AS_IF([ ! test -e "$QAT_OBJ/icp_qa_al.ko" && ! test -e "$QAT_OBJ/qat_api.ko"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the qat driver is installed then try again.
|
|
*** Failed to find icp_qa_al.ko or qat_api.ko in:
|
|
$QAT_OBJ])
|
|
])
|
|
|
|
AC_SUBST(QAT_SRC)
|
|
AC_SUBST(QAT_OBJ)
|
|
|
|
AC_DEFINE(HAVE_QAT, 1,
|
|
[qat is enabled and existed])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect the name used for the QAT Module.symvers file.
|
|
dnl #
|
|
AS_IF([test ! -z "${qatsrc}"], [
|
|
AC_MSG_CHECKING([qat file for module symbols])
|
|
QAT_SYMBOLS=$QAT_SRC/lookaside/access_layer/src/Module.symvers
|
|
|
|
AS_IF([test -r $QAT_SYMBOLS], [
|
|
AC_MSG_RESULT([$QAT_SYMBOLS])
|
|
AC_SUBST(QAT_SYMBOLS)
|
|
],[
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the qat driver is installed then try again.
|
|
*** Failed to find Module.symvers in:
|
|
$QAT_SYMBOLS])
|
|
])
|
|
])
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Basic toolchain sanity check.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_TEST_MODULE], [
|
|
AC_MSG_CHECKING([whether modules can be built])
|
|
ZFS_LINUX_TRY_COMPILE([],[],[
|
|
AC_MSG_RESULT([yes])
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
if test "x$enable_linux_builtin" != xyes; then
|
|
AC_MSG_ERROR([*** Unable to build an empty module.])
|
|
else
|
|
AC_MSG_ERROR([
|
|
*** Unable to build an empty module.
|
|
*** Please run 'make scripts' inside the kernel source tree.])
|
|
fi
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Certain kernel build options are not supported. These must be
|
|
dnl # detected at configure time and cause a build failure. Otherwise
|
|
dnl # modules may be successfully built that behave incorrectly.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG], [
|
|
AS_IF([test "x$cross_compiling" != xyes], [
|
|
AC_RUN_IFELSE([
|
|
AC_LANG_PROGRAM([
|
|
#include "$LINUX/include/linux/license.h"
|
|
], [
|
|
return !license_is_gpl_compatible("$ZFS_META_LICENSE");
|
|
])
|
|
], [
|
|
AC_DEFINE([ZFS_IS_GPL_COMPATIBLE], [1],
|
|
[Define to 1 if GPL-only symbols can be used])
|
|
], [
|
|
])
|
|
])
|
|
|
|
ZFS_AC_KERNEL_CONFIG_THREAD_SIZE
|
|
ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC
|
|
ZFS_AC_KERNEL_CONFIG_TRIM_UNUSED_KSYMS
|
|
ZFS_AC_KERNEL_CONFIG_ZLIB_INFLATE
|
|
ZFS_AC_KERNEL_CONFIG_ZLIB_DEFLATE
|
|
])
|
|
|
|
dnl #
|
|
dnl # Check configured THREAD_SIZE
|
|
dnl #
|
|
dnl # The stack size will vary by architecture, but as of Linux 3.15 on x86_64
|
|
dnl # the default thread stack size was increased to 16K from 8K. Therefore,
|
|
dnl # on newer kernels and some architectures stack usage optimizations can be
|
|
dnl # conditionally applied to improve performance without negatively impacting
|
|
dnl # stability.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_THREAD_SIZE], [
|
|
AC_MSG_CHECKING([whether kernel was built with 16K or larger stacks])
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#include <linux/module.h>
|
|
],[
|
|
#if (THREAD_SIZE < 16384)
|
|
#error "THREAD_SIZE is less than 16K"
|
|
#endif
|
|
],[
|
|
AC_MSG_RESULT([yes])
|
|
AC_DEFINE(HAVE_LARGE_STACKS, 1, [kernel has large stacks])
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Check CONFIG_DEBUG_LOCK_ALLOC
|
|
dnl #
|
|
dnl # This is typically only set for debug kernels because it comes with
|
|
dnl # a performance penalty. However, when it is set it maps the non-GPL
|
|
dnl # symbol mutex_lock() to the GPL-only mutex_lock_nested() symbol.
|
|
dnl # This will cause a failure at link time which we'd rather know about
|
|
dnl # at compile time.
|
|
dnl #
|
|
dnl # Since we plan to pursue making mutex_lock_nested() a non-GPL symbol
|
|
dnl # with the upstream community we add a check to detect this case.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC], [
|
|
|
|
ZFS_LINUX_CONFIG([DEBUG_LOCK_ALLOC], [
|
|
AC_MSG_CHECKING([whether mutex_lock() is GPL-only])
|
|
tmp_flags="$EXTRA_KCFLAGS"
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
|
|
MODULE_LICENSE("$ZFS_META_LICENSE");
|
|
],[
|
|
struct mutex lock;
|
|
|
|
mutex_init(&lock);
|
|
mutex_lock(&lock);
|
|
mutex_unlock(&lock);
|
|
],[
|
|
AC_MSG_RESULT(no)
|
|
],[
|
|
AC_MSG_RESULT(yes)
|
|
AC_MSG_ERROR([
|
|
*** Kernel built with CONFIG_DEBUG_LOCK_ALLOC which is incompatible
|
|
*** with the CDDL license and will prevent the module linking stage
|
|
*** from succeeding. You must rebuild your kernel without this
|
|
*** option enabled.])
|
|
])
|
|
EXTRA_KCFLAGS="$tmp_flags"
|
|
], [])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Check CONFIG_TRIM_UNUSED_KSYMS
|
|
dnl #
|
|
dnl # Verify the kernel has CONFIG_TRIM_UNUSED_KSYMS disabled.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_TRIM_UNUSED_KSYMS], [
|
|
AC_MSG_CHECKING([whether CONFIG_TRIM_UNUSED_KSYM is disabled])
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#if defined(CONFIG_TRIM_UNUSED_KSYMS)
|
|
#error CONFIG_TRIM_UNUSED_KSYMS not defined
|
|
#endif
|
|
],[ ],[
|
|
AC_MSG_RESULT([yes])
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
AC_MSG_ERROR([
|
|
*** This kernel has unused symbols trimming enabled, please disable.
|
|
*** Rebuild the kernel with CONFIG_TRIM_UNUSED_KSYMS=n set.])
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_CONFTEST_H
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_CONFTEST_H], [
|
|
cat - <<_ACEOF >conftest.h
|
|
$1
|
|
_ACEOF
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_CONFTEST_C
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_CONFTEST_C], [
|
|
cat confdefs.h - <<_ACEOF >conftest.c
|
|
$1
|
|
_ACEOF
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LANG_PROGRAM(C)([PROLOGUE], [BODY])
|
|
dnl #
|
|
m4_define([ZFS_LANG_PROGRAM], [
|
|
$1
|
|
int
|
|
main (void)
|
|
{
|
|
dnl Do *not* indent the following line: there may be CPP directives.
|
|
dnl Don't move the `;' right after for the same reason.
|
|
$2
|
|
;
|
|
return 0;
|
|
}
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_COMPILE_IFELSE / like AC_COMPILE_IFELSE
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_COMPILE_IFELSE], [
|
|
m4_ifvaln([$1], [ZFS_LINUX_CONFTEST_C([$1])])
|
|
m4_ifvaln([$6], [ZFS_LINUX_CONFTEST_H([$6])], [ZFS_LINUX_CONFTEST_H([])])
|
|
rm -Rf build && mkdir -p build && touch build/conftest.mod.c
|
|
echo "obj-m := conftest.o" >build/Makefile
|
|
modpost_flag=''
|
|
test "x$enable_linux_builtin" = xyes && modpost_flag='modpost=true' # fake modpost stage
|
|
AS_IF(
|
|
[AC_TRY_COMMAND(cp conftest.c conftest.h build && make [$2] -C $LINUX_OBJ EXTRA_CFLAGS="-Werror $FRAME_LARGER_THAN $EXTRA_KCFLAGS" $ARCH_UM M=$PWD/build $modpost_flag) >/dev/null && AC_TRY_COMMAND([$3])],
|
|
[$4],
|
|
[_AC_MSG_LOG_CONFTEST m4_ifvaln([$5],[$5])]
|
|
)
|
|
rm -Rf build
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_TRY_COMPILE like AC_TRY_COMPILE
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_TRY_COMPILE],
|
|
[ZFS_LINUX_COMPILE_IFELSE(
|
|
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
|
|
[modules],
|
|
[test -s build/conftest.o],
|
|
[$3], [$4])
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_CONFIG
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_CONFIG],
|
|
[AC_MSG_CHECKING([whether kernel was built with CONFIG_$1])
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#include <linux/module.h>
|
|
],[
|
|
#ifndef CONFIG_$1
|
|
#error CONFIG_$1 not #defined
|
|
#endif
|
|
],[
|
|
AC_MSG_RESULT([yes])
|
|
$2
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
$3
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_CHECK_SYMBOL_EXPORT
|
|
dnl # check symbol exported or not
|
|
dnl #
|
|
AC_DEFUN([ZFS_CHECK_SYMBOL_EXPORT], [
|
|
grep -q -E '[[[:space:]]]$1[[[:space:]]]' \
|
|
$LINUX_OBJ/$LINUX_SYMBOLS 2>/dev/null
|
|
rc=$?
|
|
if test $rc -ne 0; then
|
|
export=0
|
|
for file in $2; do
|
|
grep -q -E "EXPORT_SYMBOL.*($1)" \
|
|
"$LINUX/$file" 2>/dev/null
|
|
rc=$?
|
|
if test $rc -eq 0; then
|
|
export=1
|
|
break;
|
|
fi
|
|
done
|
|
if test $export -eq 0; then :
|
|
$4
|
|
else :
|
|
$3
|
|
fi
|
|
else :
|
|
$3
|
|
fi
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_TRY_COMPILE_SYMBOL
|
|
dnl # like ZFS_LINUX_TRY_COMPILE, except ZFS_CHECK_SYMBOL_EXPORT
|
|
dnl # is called if not compiling for builtin
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_TRY_COMPILE_SYMBOL], [
|
|
ZFS_LINUX_TRY_COMPILE([$1], [$2], [rc=0], [rc=1])
|
|
if test $rc -ne 0; then :
|
|
$6
|
|
else
|
|
if test "x$enable_linux_builtin" != xyes; then
|
|
ZFS_CHECK_SYMBOL_EXPORT([$3], [$4], [rc=0], [rc=1])
|
|
fi
|
|
if test $rc -ne 0; then :
|
|
$6
|
|
else :
|
|
$5
|
|
fi
|
|
fi
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_TRY_COMPILE_HEADER
|
|
dnl # like ZFS_LINUX_TRY_COMPILE, except the contents conftest.h are
|
|
dnl # provided via the fifth parameter
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_TRY_COMPILE_HEADER],
|
|
[ZFS_LINUX_COMPILE_IFELSE(
|
|
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
|
|
[modules],
|
|
[test -s build/conftest.o],
|
|
[$3], [$4], [$5])
|
|
])
|