c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-18 02:20:59 +03:00
Code Issues Packages Projects Releases Wiki Activity
34037afe24
mirror_zfs/lib/libspl/include/sys/Makefile.in
Etienne Dechamps 34037afe24 Improve ZVOL queue behavior. 
The Linux block device queue subsystem exposes a number of configurable
settings described in Linux block/blk-settings.c. The defaults for these
settings are tuned for hard drives, and are not optimized for ZVOLs. Proper
configuration of these options would allow upper layers (I/O scheduler) to
take better decisions about write merging and ordering.

Detailed rationale:

 - max_hw_sectors is set to unlimited (UINT_MAX). zvol_write() is able to
   handle writes of any size, so there's no reason to impose a limit. Let the
   upper layer decide.

 - max_segments and max_segment_size are set to unlimited. zvol_write() will
   copy the requests' contents into a dbuf anyway, so the number and size of
   the segments are irrelevant. Let the upper layer decide.

 - physical_block_size and io_opt are set to the ZVOL's block size. This
   has the potential to somewhat alleviate issue #361 for ZVOLs, by warning
   the upper layers that writes smaller than the volume's block size will be
   slow.

 - The NONROT flag is set to indicate this isn't a rotational device.
   Although the backing zpool might be composed of rotational devices, the
   resulting ZVOL often doesn't exhibit the same behavior due to the COW
   mechanisms used by ZFS. Setting this flag will prevent upper layers from
   making useless decisions (such as reordering writes) based on incorrect
   assumptions about the behavior of the ZVOL.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-07 16:23:06 -08:00

780 lines
25 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = lib/libspl/include/sys
DIST_COMMON = $(libspl_HEADERS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
$(top_srcdir)/config/kernel-bdi.m4 \
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-queue-flush.m4 \
$(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
$(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
$(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
$(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
$(top_srcdir)/config/kernel-evict-inode.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-fsync.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
$(top_srcdir)/config/kernel-mount-nodev.m4 \
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
$(top_srcdir)/config/kernel-security-inode-init.m4 \
$(top_srcdir)/config/kernel-set-nlink.m4 \
$(top_srcdir)/config/kernel-show-options.m4 \
$(top_srcdir)/config/kernel-shrink.m4 \
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
$(top_srcdir)/config/kernel-xattr-handler.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-selinux.m4 \
$(top_srcdir)/config/user-udev.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/zfs_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(libspldir)"
HEADERS = $(libspl_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_MAKEPKG = @HAVE_MAKEPKG@
HAVE_PACMAN = @HAVE_PACMAN@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSELINUX = @LIBSELINUX@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAKEPKG = @MAKEPKG@
MAKEPKG_VERSION = @MAKEPKG_VERSION@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACMAN = @PACMAN@
PACMAN_VERSION = @PACMAN_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
udevdir = @udevdir@
udevruledir = @udevruledir@
SUBDIRS = dktp sysevent
libspldir = $(includedir)/libspl/sys
libspl_HEADERS = \
$(top_srcdir)/lib/libspl/include/sys/acl.h \
$(top_srcdir)/lib/libspl/include/sys/acl_impl.h \
$(top_srcdir)/lib/libspl/include/sys/bitmap.h \
$(top_srcdir)/lib/libspl/include/sys/byteorder.h \
$(top_srcdir)/lib/libspl/include/sys/callb.h \
$(top_srcdir)/lib/libspl/include/sys/cmn_err.h \
$(top_srcdir)/lib/libspl/include/sys/compress.h \
$(top_srcdir)/lib/libspl/include/sys/cred.h \
$(top_srcdir)/lib/libspl/include/sys/debug.h \
$(top_srcdir)/lib/libspl/include/sys/dkio.h \
$(top_srcdir)/lib/libspl/include/sys/dklabel.h \
$(top_srcdir)/lib/libspl/include/sys/feature_tests.h \
$(top_srcdir)/lib/libspl/include/sys/file.h \
$(top_srcdir)/lib/libspl/include/sys/frame.h \
$(top_srcdir)/lib/libspl/include/sys/int_limits.h \
$(top_srcdir)/lib/libspl/include/sys/int_types.h \
$(top_srcdir)/lib/libspl/include/sys/inttypes.h \
$(top_srcdir)/lib/libspl/include/sys/isa_defs.h \
$(top_srcdir)/lib/libspl/include/sys/kmem.h \
$(top_srcdir)/lib/libspl/include/sys/kstat.h \
$(top_srcdir)/lib/libspl/include/sys/list.h \
$(top_srcdir)/lib/libspl/include/sys/list_impl.h \
$(top_srcdir)/lib/libspl/include/sys/machelf.h \
$(top_srcdir)/lib/libspl/include/sys/mhd.h \
$(top_srcdir)/lib/libspl/include/sys/mkdev.h \
$(top_srcdir)/lib/libspl/include/sys/mntent.h \
$(top_srcdir)/lib/libspl/include/sys/mnttab.h \
$(top_srcdir)/lib/libspl/include/sys/mount.h \
$(top_srcdir)/lib/libspl/include/sys/note.h \
$(top_srcdir)/lib/libspl/include/sys/param.h \
$(top_srcdir)/lib/libspl/include/sys/priv.h \
$(top_srcdir)/lib/libspl/include/sys/processor.h \
$(top_srcdir)/lib/libspl/include/sys/sdt.h \
$(top_srcdir)/lib/libspl/include/sys/stack.h \
$(top_srcdir)/lib/libspl/include/sys/stat.h \
$(top_srcdir)/lib/libspl/include/sys/stropts.h \
$(top_srcdir)/lib/libspl/include/sys/sunddi.h \
$(top_srcdir)/lib/libspl/include/sys/sysevent.h \
$(top_srcdir)/lib/libspl/include/sys/sysmacros.h \
$(top_srcdir)/lib/libspl/include/sys/systeminfo.h \
$(top_srcdir)/lib/libspl/include/sys/systm.h \
$(top_srcdir)/lib/libspl/include/sys/time.h \
$(top_srcdir)/lib/libspl/include/sys/types32.h \
$(top_srcdir)/lib/libspl/include/sys/types.h \
$(top_srcdir)/lib/libspl/include/sys/tzfile.h \
$(top_srcdir)/lib/libspl/include/sys/uio.h \
$(top_srcdir)/lib/libspl/include/sys/utsname.h \
$(top_srcdir)/lib/libspl/include/sys/va_list.h \
$(top_srcdir)/lib/libspl/include/sys/varargs.h \
$(top_srcdir)/lib/libspl/include/sys/vnode.h \
$(top_srcdir)/lib/libspl/include/sys/vtoc.h \
$(top_srcdir)/lib/libspl/include/sys/zone.h
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/libspl/include/sys/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu lib/libspl/include/sys/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-libsplHEADERS: $(libspl_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(libspldir)" || $(MKDIR_P) "$(DESTDIR)$(libspldir)"
@list='$(libspl_HEADERS)'; test -n "$(libspldir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libspldir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(libspldir)" || exit $$?; \
done
uninstall-libsplHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(libspl_HEADERS)'; test -n "$(libspldir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(libspldir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(libspldir)" && rm -f $$files
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(libspldir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-libsplHEADERS
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-libsplHEADERS
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-libsplHEADERS install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am \
uninstall-libsplHEADERS
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink