mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-18 18:31:00 +03:00
d441e85dd7
While the autoexpand property may seem like a small feature it depends on a significant amount of system infrastructure. Enough of that infrastructure is now in place that with a few modifications for Linux it can be supported. Auto-expand works as follows; when a block device is modified (re-sized, closed after being open r/w, etc) a change uevent is generated for udev. The ZED, which is monitoring udev events, passes the change event along to zfs_deliver_dle() if the disk or partition contains a zfs_member as identified by blkid. From here the device is matched against all imported pool vdevs using the vdev_guid which was read from the label by blkid. If a match is found the ZED reopens the pool vdev. This re-opening is important because it allows the vdev to be briefly closed so the disk partition table can be re-read. Otherwise, it wouldn't be possible to report the maximum possible expansion size. Finally, if the property autoexpand=on a vdev expansion will be attempted. After performing some sanity checks on the disk to verify that it is safe to expand, the primary partition (-part1) will be expanded and the partition table updated. The partition is then re-opened (again) to detect the updated size which allows the new capacity to be used. In order to make all of the above possible the following changes were required: * Updated the zpool_expand_001_pos and zpool_expand_003_pos tests. These tests now create a pool which is layered on a loopback, scsi_debug, and file vdev. This allows for testing of non- partitioned block device (loopback), a partition block device (scsi_debug), and a file which does not receive udev change events. This provided for better test coverage, and by removing the layering on ZFS volumes there issues surrounding layering one pool on another are avoided. * zpool_find_vdev_by_physpath() updated to accept a vdev guid. This allows for matching by guid rather than path which is a more reliable way for the ZED to reference a vdev. * Fixed zfs_zevent_wait() signal handling which could result in the ZED spinning when a signal was not handled. * Removed vdev_disk_rrpart() functionality which can be abandoned in favor of kernel provided blkdev_reread_part() function. * Added a rwlock which is held as a writer while a disk is being reopened. This is important to prevent errors from occurring for any configuration related IOs which bypass the SCL_ZIO lock. The zpool_reopen_007_pos.ksh test case was added to verify IO error are never observed when reopening. This is not expected to impact IO performance. Additional fixes which aren't critical but were discovered and resolved in the course of developing this functionality. * Added PHYS_PATH="/dev/zvol/dataset" to the vdev configuration for ZFS volumes. This is as good as a unique physical path, while the volumes are not used in the test cases anymore for other reasons this improvement was included. Reviewed by: Richard Elling <Richard.Elling@RichardElling.com> Signed-off-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #120 Closes #2437 Closes #5771 Closes #7366 Closes #7582 Closes #7629
55 lines
1.8 KiB
C
55 lines
1.8 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or http://www.opensolaris.org/os/licensing.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
/*
|
|
* Copyright (C) 2008-2010 Lawrence Livermore National Security, LLC.
|
|
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
|
|
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
|
|
* LLNL-CODE-403049.
|
|
* Copyright (c) 2018 by Delphix. All rights reserved.
|
|
*/
|
|
|
|
#ifndef _SYS_VDEV_DISK_H
|
|
#define _SYS_VDEV_DISK_H
|
|
|
|
/*
|
|
* Don't start the slice at the default block of 34; many storage
|
|
* devices will use a stripe width of 128k, other vendors prefer a 1m
|
|
* alignment. It is best to play it safe and ensure a 1m alignment
|
|
* given 512B blocks. When the block size is larger by a power of 2
|
|
* we will still be 1m aligned. Some devices are sensitive to the
|
|
* partition ending alignment as well.
|
|
*/
|
|
#define NEW_START_BLOCK 2048
|
|
#define PARTITION_END_ALIGNMENT 2048
|
|
|
|
#ifdef _KERNEL
|
|
#include <sys/vdev.h>
|
|
|
|
typedef struct vdev_disk {
|
|
ddi_devid_t vd_devid;
|
|
char *vd_minor;
|
|
struct block_device *vd_bdev;
|
|
krwlock_t vd_lock;
|
|
} vdev_disk_t;
|
|
|
|
#endif /* _KERNEL */
|
|
#endif /* _SYS_VDEV_DISK_H */
|