c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-11-17 18:11:00 +03:00
Code Issues Packages Projects Releases Wiki Activity
2959d94a0a
mirror_zfs/include/sys/fm/Makefile.in
Brian Behlendorf 2959d94a0a Add FAILFAST support 
ZFS works best when it is notified as soon as possible when a device
failure occurs.  This allows it to immediately start any recovery
actions which may be needed.  In theory Linux supports a flag which
can be set on bio's called FAILFAST which provides this quick
notification by disabling the retry logic in the lower scsi layers.

That's the theory at least.  In practice is turns out that while the
flag exists you oddly have to set it with the BIO_RW_AHEAD flag.
And even when it's set it you may get retries in the low level
drivers decides that's the right behavior, or if you don't get the
right error codes reported to the scsi midlayer.

Unfortunately, without additional kernels patchs there's not much
which can be done to improve this.  Basically, this just means that
it may take 2-3 minutes before a ZFS is notified properly that a
device has failed.  This can be improved and I suspect I'll be
submitting patches upstream to handle this.
2010-10-12 14:55:02 -07:00

726 lines
23 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = include/sys/fm
DIST_COMMON = $(am__kernel_HEADERS_DIST) $(am__libzfs_HEADERS_DIST) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libshare.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/zfs_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__kernel_HEADERS_DIST = $(top_srcdir)/include/sys/fm/protocol.h \
$(top_srcdir)/include/sys/fm/util.h
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(kerneldir)" "$(DESTDIR)$(libzfsdir)"
am__libzfs_HEADERS_DIST = $(top_srcdir)/include/sys/fm/protocol.h \
$(top_srcdir)/include/sys/fm/util.h
HEADERS = $(kernel_HEADERS) $(libzfs_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = fs
COMMON_H = \
$(top_srcdir)/include/sys/fm/protocol.h \
$(top_srcdir)/include/sys/fm/util.h
KERNEL_H =
USER_H =
EXTRA_DIST = $(COMMON_H) $(KERNEL_H) $(USER_H)
@CONFIG_USER_TRUE@libzfsdir = $(includedir)/libzfs/sys/fm
@CONFIG_USER_TRUE@libzfs_HEADERS = $(COMMON_H) $(USER_H)
@CONFIG_KERNEL_TRUE@kerneldir = /usr/src/zfs-$(ZFS_META_VERSION)/$(LINUX_VERSION)/sys/fm
@CONFIG_KERNEL_TRUE@kernel_HEADERS = $(COMMON_H) $(KERNEL_H)
all: all-recursive
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/sys/fm/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu include/sys/fm/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-kernelHEADERS: $(kernel_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(kerneldir)" || $(MKDIR_P) "$(DESTDIR)$(kerneldir)"
@list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
done
uninstall-kernelHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(kerneldir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(kerneldir)" && rm -f $$files
install-libzfsHEADERS: $(libzfs_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(libzfsdir)" || $(MKDIR_P) "$(DESTDIR)$(libzfsdir)"
@list='$(libzfs_HEADERS)'; test -n "$(libzfsdir)" || list=; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libzfsdir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(libzfsdir)" || exit $$?; \
done
uninstall-libzfsHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(libzfs_HEADERS)'; test -n "$(libzfsdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(libzfsdir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(libzfsdir)" && rm -f $$files
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(kerneldir)" "$(DESTDIR)$(libzfsdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-kernelHEADERS install-libzfsHEADERS
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-kernelHEADERS uninstall-libzfsHEADERS
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \
ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-kernelHEADERS install-libzfsHEADERS \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-kernelHEADERS \
uninstall-libzfsHEADERS
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink