mirror_zfs/module/zfs/zfs_vfsops.c
Brian Behlendorf ab26409db7 Linux 3.1 compat, super_block->s_shrink
The Linux 3.1 kernel has introduced the concept of per-filesystem
shrinkers which are directly assoicated with a super block.  Prior
to this change there was one shared global shrinker.

The zfs code relied on being able to call the global shrinker when
the arc_meta_limit was exceeded.  This would cause the VFS to drop
references on a fraction of the dentries in the dcache.  The ARC
could then safely reclaim the memory used by these entries and
honor the arc_meta_limit.  Unfortunately, when per-filesystem
shrinkers were added the old interfaces were made unavailable.

This change adds support to use the new per-filesystem shrinker
interface so we can continue to honor the arc_meta_limit.  The
major benefit of the new interface is that we can now target
only the zfs filesystem for dentry and inode pruning.  Thus we
can minimize any impact on the caching of other filesystems.

In the context of making this change several other important
issues related to managing the ARC were addressed, they include:

* The dnlc_reduce_cache() function which was called by the ARC
to drop dentries for the Posix layer was replaced with a generic
zfs_prune_t callback.  The ZPL layer now registers a callback to
drop these dentries removing a layering violation which dates
back to the Solaris code.  This callback can also be used by
other ARC consumers such as Lustre.

  arc_add_prune_callback()
  arc_remove_prune_callback()

* The arc_reduce_dnlc_percent module option has been changed to
arc_meta_prune for clarity.  The dnlc functions are specific to
Solaris's VFS and have already been largely eliminated already.
The replacement tunable now represents the number of bytes the
prune callback will request when invoked.

* Less aggressively invoke the prune callback.  We used to call
this whenever we exceeded the arc_meta_limit however that's not
strictly correct since it results in over zeleous reclaim of
dentries and inodes.  It is now only called once the arc_meta_limit
is exceeded and every effort has been made to evict other data from
the ARC cache.

* More promptly manage exceeding the arc_meta_limit.  When reading
meta data in to the cache if a buffer was unable to be recycled
notify the arc_reclaim thread to invoke the required prune.

* Added arcstat_prune kstat which is incremented when the ARC
is forced to request that a consumer prune its cache.  Remember
this will only occur when the ARC has no other choice.  If it
can evict buffers safely without invoking the prune callback
it will.

* This change is also expected to resolve the unexpect collapses
of the ARC cache.  This would occur because when exceeded just the
arc_meta_limit reclaim presure would be excerted on the arc_c
value via arc_shrink().  This effectively shrunk the entire cache
when really we just needed to reclaim meta data.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #466
Closes #292
2012-01-11 11:46:02 -08:00

1565 lines
37 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
*/
/* Portions Copyright 2010 Robert Milkowski */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysmacros.h>
#include <sys/kmem.h>
#include <sys/pathname.h>
#include <sys/vnode.h>
#include <sys/vfs.h>
#include <sys/vfs_opreg.h>
#include <sys/mntent.h>
#include <sys/mount.h>
#include <sys/cmn_err.h>
#include "fs/fs_subr.h"
#include <sys/zfs_znode.h>
#include <sys/zfs_vnops.h>
#include <sys/zfs_dir.h>
#include <sys/zil.h>
#include <sys/fs/zfs.h>
#include <sys/dmu.h>
#include <sys/dsl_prop.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_deleg.h>
#include <sys/spa.h>
#include <sys/zap.h>
#include <sys/sa.h>
#include <sys/varargs.h>
#include <sys/policy.h>
#include <sys/atomic.h>
#include <sys/mkdev.h>
#include <sys/modctl.h>
#include <sys/refstr.h>
#include <sys/zfs_ioctl.h>
#include <sys/zfs_fuid.h>
#include <sys/bootconf.h>
#include <sys/sunddi.h>
#include <sys/dnlc.h>
#include <sys/dmu_objset.h>
#include <sys/spa_boot.h>
#include <sys/sa.h>
#include <sys/zpl.h>
#include "zfs_comutil.h"
/*ARGSUSED*/
int
zfs_sync(struct super_block *sb, int wait, cred_t *cr)
{
zfs_sb_t *zsb = sb->s_fs_info;
/*
* Data integrity is job one. We don't want a compromised kernel
* writing to the storage pool, so we never sync during panic.
*/
if (unlikely(oops_in_progress))
return (0);
/*
* Semantically, the only requirement is that the sync be initiated.
* The DMU syncs out txgs frequently, so there's nothing to do.
*/
if (!wait)
return (0);
if (zsb != NULL) {
/*
* Sync a specific filesystem.
*/
dsl_pool_t *dp;
ZFS_ENTER(zsb);
dp = dmu_objset_pool(zsb->z_os);
/*
* If the system is shutting down, then skip any
* filesystems which may exist on a suspended pool.
*/
if (spa_suspended(dp->dp_spa)) {
ZFS_EXIT(zsb);
return (0);
}
if (zsb->z_log != NULL)
zil_commit(zsb->z_log, 0);
ZFS_EXIT(zsb);
} else {
/*
* Sync all ZFS filesystems. This is what happens when you
* run sync(1M). Unlike other filesystems, ZFS honors the
* request by waiting for all pools to commit all dirty data.
*/
spa_sync_allpools();
}
return (0);
}
EXPORT_SYMBOL(zfs_sync);
boolean_t
zfs_is_readonly(zfs_sb_t *zsb)
{
return (!!(zsb->z_sb->s_flags & MS_RDONLY));
}
EXPORT_SYMBOL(zfs_is_readonly);
static void
atime_changed_cb(void *arg, uint64_t newval)
{
((zfs_sb_t *)arg)->z_atime = newval;
}
static void
xattr_changed_cb(void *arg, uint64_t newval)
{
zfs_sb_t *zsb = arg;
if (newval == ZFS_XATTR_OFF) {
zsb->z_flags &= ~ZSB_XATTR;
} else {
zsb->z_flags |= ZSB_XATTR;
if (newval == ZFS_XATTR_SA)
zsb->z_xattr_sa = B_TRUE;
else
zsb->z_xattr_sa = B_FALSE;
}
}
static void
blksz_changed_cb(void *arg, uint64_t newval)
{
zfs_sb_t *zsb = arg;
if (newval < SPA_MINBLOCKSIZE ||
newval > SPA_MAXBLOCKSIZE || !ISP2(newval))
newval = SPA_MAXBLOCKSIZE;
zsb->z_max_blksz = newval;
}
static void
readonly_changed_cb(void *arg, uint64_t newval)
{
zfs_sb_t *zsb = arg;
struct super_block *sb = zsb->z_sb;
if (sb == NULL)
return;
if (newval)
sb->s_flags |= MS_RDONLY;
else
sb->s_flags &= ~MS_RDONLY;
}
static void
devices_changed_cb(void *arg, uint64_t newval)
{
}
static void
setuid_changed_cb(void *arg, uint64_t newval)
{
}
static void
exec_changed_cb(void *arg, uint64_t newval)
{
}
static void
nbmand_changed_cb(void *arg, uint64_t newval)
{
zfs_sb_t *zsb = arg;
struct super_block *sb = zsb->z_sb;
if (sb == NULL)
return;
if (newval == TRUE)
sb->s_flags |= MS_MANDLOCK;
else
sb->s_flags &= ~MS_MANDLOCK;
}
static void
snapdir_changed_cb(void *arg, uint64_t newval)
{
((zfs_sb_t *)arg)->z_show_ctldir = newval;
}
static void
vscan_changed_cb(void *arg, uint64_t newval)
{
((zfs_sb_t *)arg)->z_vscan = newval;
}
static void
acl_inherit_changed_cb(void *arg, uint64_t newval)
{
((zfs_sb_t *)arg)->z_acl_inherit = newval;
}
int
zfs_register_callbacks(zfs_sb_t *zsb)
{
struct dsl_dataset *ds = NULL;
objset_t *os = zsb->z_os;
int error = 0;
if (zfs_is_readonly(zsb) || !spa_writeable(dmu_objset_spa(os)))
readonly_changed_cb(zsb, B_TRUE);
/*
* Register property callbacks.
*
* It would probably be fine to just check for i/o error from
* the first prop_register(), but I guess I like to go
* overboard...
*/
ds = dmu_objset_ds(os);
error = dsl_prop_register(ds,
"atime", atime_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"xattr", xattr_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"recordsize", blksz_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"readonly", readonly_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"devices", devices_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"setuid", setuid_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"exec", exec_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"snapdir", snapdir_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"aclinherit", acl_inherit_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"vscan", vscan_changed_cb, zsb);
error = error ? error : dsl_prop_register(ds,
"nbmand", nbmand_changed_cb, zsb);
if (error)
goto unregister;
return (0);
unregister:
/*
* We may attempt to unregister some callbacks that are not
* registered, but this is OK; it will simply return ENOMSG,
* which we will ignore.
*/
(void) dsl_prop_unregister(ds, "atime", atime_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "xattr", xattr_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "recordsize", blksz_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "readonly", readonly_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "devices", devices_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "setuid", setuid_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "exec", exec_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "snapdir", snapdir_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "aclinherit", acl_inherit_changed_cb,
zsb);
(void) dsl_prop_unregister(ds, "vscan", vscan_changed_cb, zsb);
(void) dsl_prop_unregister(ds, "nbmand", nbmand_changed_cb, zsb);
return (error);
}
EXPORT_SYMBOL(zfs_register_callbacks);
static int
zfs_space_delta_cb(dmu_object_type_t bonustype, void *data,
uint64_t *userp, uint64_t *groupp)
{
znode_phys_t *znp = data;
int error = 0;
/*
* Is it a valid type of object to track?
*/
if (bonustype != DMU_OT_ZNODE && bonustype != DMU_OT_SA)
return (ENOENT);
/*
* If we have a NULL data pointer
* then assume the id's aren't changing and
* return EEXIST to the dmu to let it know to
* use the same ids
*/
if (data == NULL)
return (EEXIST);
if (bonustype == DMU_OT_ZNODE) {
*userp = znp->zp_uid;
*groupp = znp->zp_gid;
} else {
int hdrsize;
ASSERT(bonustype == DMU_OT_SA);
hdrsize = sa_hdrsize(data);
if (hdrsize != 0) {
*userp = *((uint64_t *)((uintptr_t)data + hdrsize +
SA_UID_OFFSET));
*groupp = *((uint64_t *)((uintptr_t)data + hdrsize +
SA_GID_OFFSET));
} else {
/*
* This should only happen for newly created
* files that haven't had the znode data filled
* in yet.
*/
*userp = 0;
*groupp = 0;
}
}
return (error);
}
static void
fuidstr_to_sid(zfs_sb_t *zsb, const char *fuidstr,
char *domainbuf, int buflen, uid_t *ridp)
{
uint64_t fuid;
const char *domain;
fuid = strtonum(fuidstr, NULL);
domain = zfs_fuid_find_by_idx(zsb, FUID_INDEX(fuid));
if (domain)
(void) strlcpy(domainbuf, domain, buflen);
else
domainbuf[0] = '\0';
*ridp = FUID_RID(fuid);
}
static uint64_t
zfs_userquota_prop_to_obj(zfs_sb_t *zsb, zfs_userquota_prop_t type)
{
switch (type) {
case ZFS_PROP_USERUSED:
return (DMU_USERUSED_OBJECT);
case ZFS_PROP_GROUPUSED:
return (DMU_GROUPUSED_OBJECT);
case ZFS_PROP_USERQUOTA:
return (zsb->z_userquota_obj);
case ZFS_PROP_GROUPQUOTA:
return (zsb->z_groupquota_obj);
default:
return (ENOTSUP);
}
return (0);
}
int
zfs_userspace_many(zfs_sb_t *zsb, zfs_userquota_prop_t type,
uint64_t *cookiep, void *vbuf, uint64_t *bufsizep)
{
int error;
zap_cursor_t zc;
zap_attribute_t za;
zfs_useracct_t *buf = vbuf;
uint64_t obj;
if (!dmu_objset_userspace_present(zsb->z_os))
return (ENOTSUP);
obj = zfs_userquota_prop_to_obj(zsb, type);
if (obj == 0) {
*bufsizep = 0;
return (0);
}
for (zap_cursor_init_serialized(&zc, zsb->z_os, obj, *cookiep);
(error = zap_cursor_retrieve(&zc, &za)) == 0;
zap_cursor_advance(&zc)) {
if ((uintptr_t)buf - (uintptr_t)vbuf + sizeof (zfs_useracct_t) >
*bufsizep)
break;
fuidstr_to_sid(zsb, za.za_name,
buf->zu_domain, sizeof (buf->zu_domain), &buf->zu_rid);
buf->zu_space = za.za_first_integer;
buf++;
}
if (error == ENOENT)
error = 0;
ASSERT3U((uintptr_t)buf - (uintptr_t)vbuf, <=, *bufsizep);
*bufsizep = (uintptr_t)buf - (uintptr_t)vbuf;
*cookiep = zap_cursor_serialize(&zc);
zap_cursor_fini(&zc);
return (error);
}
EXPORT_SYMBOL(zfs_userspace_many);
/*
* buf must be big enough (eg, 32 bytes)
*/
static int
id_to_fuidstr(zfs_sb_t *zsb, const char *domain, uid_t rid,
char *buf, boolean_t addok)
{
uint64_t fuid;
int domainid = 0;
if (domain && domain[0]) {
domainid = zfs_fuid_find_by_domain(zsb, domain, NULL, addok);
if (domainid == -1)
return (ENOENT);
}
fuid = FUID_ENCODE(domainid, rid);
(void) sprintf(buf, "%llx", (longlong_t)fuid);
return (0);
}
int
zfs_userspace_one(zfs_sb_t *zsb, zfs_userquota_prop_t type,
const char *domain, uint64_t rid, uint64_t *valp)
{
char buf[32];
int err;
uint64_t obj;
*valp = 0;
if (!dmu_objset_userspace_present(zsb->z_os))
return (ENOTSUP);
obj = zfs_userquota_prop_to_obj(zsb, type);
if (obj == 0)
return (0);
err = id_to_fuidstr(zsb, domain, rid, buf, B_FALSE);
if (err)
return (err);
err = zap_lookup(zsb->z_os, obj, buf, 8, 1, valp);
if (err == ENOENT)
err = 0;
return (err);
}
EXPORT_SYMBOL(zfs_userspace_one);
int
zfs_set_userquota(zfs_sb_t *zsb, zfs_userquota_prop_t type,
const char *domain, uint64_t rid, uint64_t quota)
{
char buf[32];
int err;
dmu_tx_t *tx;
uint64_t *objp;
boolean_t fuid_dirtied;
if (type != ZFS_PROP_USERQUOTA && type != ZFS_PROP_GROUPQUOTA)
return (EINVAL);
if (zsb->z_version < ZPL_VERSION_USERSPACE)
return (ENOTSUP);
objp = (type == ZFS_PROP_USERQUOTA) ? &zsb->z_userquota_obj :
&zsb->z_groupquota_obj;
err = id_to_fuidstr(zsb, domain, rid, buf, B_TRUE);
if (err)
return (err);
fuid_dirtied = zsb->z_fuid_dirty;
tx = dmu_tx_create(zsb->z_os);
dmu_tx_hold_zap(tx, *objp ? *objp : DMU_NEW_OBJECT, B_TRUE, NULL);
if (*objp == 0) {
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_TRUE,
zfs_userquota_prop_prefixes[type]);
}
if (fuid_dirtied)
zfs_fuid_txhold(zsb, tx);
err = dmu_tx_assign(tx, TXG_WAIT);
if (err) {
dmu_tx_abort(tx);
return (err);
}
mutex_enter(&zsb->z_lock);
if (*objp == 0) {
*objp = zap_create(zsb->z_os, DMU_OT_USERGROUP_QUOTA,
DMU_OT_NONE, 0, tx);
VERIFY(0 == zap_add(zsb->z_os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[type], 8, 1, objp, tx));
}
mutex_exit(&zsb->z_lock);
if (quota == 0) {
err = zap_remove(zsb->z_os, *objp, buf, tx);
if (err == ENOENT)
err = 0;
} else {
err = zap_update(zsb->z_os, *objp, buf, 8, 1, &quota, tx);
}
ASSERT(err == 0);
if (fuid_dirtied)
zfs_fuid_sync(zsb, tx);
dmu_tx_commit(tx);
return (err);
}
EXPORT_SYMBOL(zfs_set_userquota);
boolean_t
zfs_fuid_overquota(zfs_sb_t *zsb, boolean_t isgroup, uint64_t fuid)
{
char buf[32];
uint64_t used, quota, usedobj, quotaobj;
int err;
usedobj = isgroup ? DMU_GROUPUSED_OBJECT : DMU_USERUSED_OBJECT;
quotaobj = isgroup ? zsb->z_groupquota_obj : zsb->z_userquota_obj;
if (quotaobj == 0 || zsb->z_replay)
return (B_FALSE);
(void) sprintf(buf, "%llx", (longlong_t)fuid);
err = zap_lookup(zsb->z_os, quotaobj, buf, 8, 1, &quota);
if (err != 0)
return (B_FALSE);
err = zap_lookup(zsb->z_os, usedobj, buf, 8, 1, &used);
if (err != 0)
return (B_FALSE);
return (used >= quota);
}
EXPORT_SYMBOL(zfs_fuid_overquota);
boolean_t
zfs_owner_overquota(zfs_sb_t *zsb, znode_t *zp, boolean_t isgroup)
{
uint64_t fuid;
uint64_t quotaobj;
quotaobj = isgroup ? zsb->z_groupquota_obj : zsb->z_userquota_obj;
fuid = isgroup ? zp->z_gid : zp->z_uid;
if (quotaobj == 0 || zsb->z_replay)
return (B_FALSE);
return (zfs_fuid_overquota(zsb, isgroup, fuid));
}
EXPORT_SYMBOL(zfs_owner_overquota);
int
zfs_sb_create(const char *osname, zfs_sb_t **zsbp)
{
objset_t *os;
zfs_sb_t *zsb;
uint64_t zval;
int i, error;
uint64_t sa_obj;
zsb = kmem_zalloc(sizeof (zfs_sb_t), KM_SLEEP);
/*
* We claim to always be readonly so we can open snapshots;
* other ZPL code will prevent us from writing to snapshots.
*/
error = dmu_objset_own(osname, DMU_OST_ZFS, B_TRUE, zsb, &os);
if (error) {
kmem_free(zsb, sizeof (zfs_sb_t));
return (error);
}
/*
* Initialize the zfs-specific filesystem structure.
* Should probably make this a kmem cache, shuffle fields,
* and just bzero up to z_hold_mtx[].
*/
zsb->z_sb = NULL;
zsb->z_parent = zsb;
zsb->z_max_blksz = SPA_MAXBLOCKSIZE;
zsb->z_show_ctldir = ZFS_SNAPDIR_VISIBLE;
zsb->z_os = os;
error = zfs_get_zplprop(os, ZFS_PROP_VERSION, &zsb->z_version);
if (error) {
goto out;
} else if (zsb->z_version >
zfs_zpl_version_map(spa_version(dmu_objset_spa(os)))) {
(void) printk("Can't mount a version %lld file system "
"on a version %lld pool\n. Pool must be upgraded to mount "
"this file system.", (u_longlong_t)zsb->z_version,
(u_longlong_t)spa_version(dmu_objset_spa(os)));
error = ENOTSUP;
goto out;
}
if ((error = zfs_get_zplprop(os, ZFS_PROP_NORMALIZE, &zval)) != 0)
goto out;
zsb->z_norm = (int)zval;
if ((error = zfs_get_zplprop(os, ZFS_PROP_UTF8ONLY, &zval)) != 0)
goto out;
zsb->z_utf8 = (zval != 0);
if ((error = zfs_get_zplprop(os, ZFS_PROP_CASE, &zval)) != 0)
goto out;
zsb->z_case = (uint_t)zval;
/*
* Fold case on file systems that are always or sometimes case
* insensitive.
*/
if (zsb->z_case == ZFS_CASE_INSENSITIVE ||
zsb->z_case == ZFS_CASE_MIXED)
zsb->z_norm |= U8_TEXTPREP_TOUPPER;
zsb->z_use_fuids = USE_FUIDS(zsb->z_version, zsb->z_os);
zsb->z_use_sa = USE_SA(zsb->z_version, zsb->z_os);
if (zsb->z_use_sa) {
/* should either have both of these objects or none */
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_SA_ATTRS, 8, 1,
&sa_obj);
if (error)
goto out;
error = zfs_get_zplprop(os, ZFS_PROP_XATTR, &zval);
if ((error == 0) && (zval == ZFS_XATTR_SA))
zsb->z_xattr_sa = B_TRUE;
} else {
/*
* Pre SA versions file systems should never touch
* either the attribute registration or layout objects.
*/
sa_obj = 0;
}
error = sa_setup(os, sa_obj, zfs_attr_table, ZPL_END,
&zsb->z_attr_table);
if (error)
goto out;
if (zsb->z_version >= ZPL_VERSION_SA)
sa_register_update_callback(os, zfs_sa_upgrade);
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_ROOT_OBJ, 8, 1,
&zsb->z_root);
if (error)
goto out;
ASSERT(zsb->z_root != 0);
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_UNLINKED_SET, 8, 1,
&zsb->z_unlinkedobj);
if (error)
goto out;
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_USERQUOTA],
8, 1, &zsb->z_userquota_obj);
if (error && error != ENOENT)
goto out;
error = zap_lookup(os, MASTER_NODE_OBJ,
zfs_userquota_prop_prefixes[ZFS_PROP_GROUPQUOTA],
8, 1, &zsb->z_groupquota_obj);
if (error && error != ENOENT)
goto out;
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_FUID_TABLES, 8, 1,
&zsb->z_fuid_obj);
if (error && error != ENOENT)
goto out;
error = zap_lookup(os, MASTER_NODE_OBJ, ZFS_SHARES_DIR, 8, 1,
&zsb->z_shares_dir);
if (error && error != ENOENT)
goto out;
mutex_init(&zsb->z_znodes_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&zsb->z_lock, NULL, MUTEX_DEFAULT, NULL);
list_create(&zsb->z_all_znodes, sizeof (znode_t),
offsetof(znode_t, z_link_node));
rrw_init(&zsb->z_teardown_lock);
rw_init(&zsb->z_teardown_inactive_lock, NULL, RW_DEFAULT, NULL);
rw_init(&zsb->z_fuid_lock, NULL, RW_DEFAULT, NULL);
for (i = 0; i != ZFS_OBJ_MTX_SZ; i++)
mutex_init(&zsb->z_hold_mtx[i], NULL, MUTEX_DEFAULT, NULL);
*zsbp = zsb;
return (0);
out:
dmu_objset_disown(os, zsb);
*zsbp = NULL;
kmem_free(zsb, sizeof (zfs_sb_t));
return (error);
}
EXPORT_SYMBOL(zfs_sb_create);
int
zfs_sb_setup(zfs_sb_t *zsb, boolean_t mounting)
{
int error;
error = zfs_register_callbacks(zsb);
if (error)
return (error);
/*
* Set the objset user_ptr to track its zsb.
*/
mutex_enter(&zsb->z_os->os_user_ptr_lock);
dmu_objset_set_user(zsb->z_os, zsb);
mutex_exit(&zsb->z_os->os_user_ptr_lock);
zsb->z_log = zil_open(zsb->z_os, zfs_get_data);
/*
* If we are not mounting (ie: online recv), then we don't
* have to worry about replaying the log as we blocked all
* operations out since we closed the ZIL.
*/
if (mounting) {
boolean_t readonly;
/*
* During replay we remove the read only flag to
* allow replays to succeed.
*/
readonly = zfs_is_readonly(zsb);
if (readonly != 0)
readonly_changed_cb(zsb, B_FALSE);
else
zfs_unlinked_drain(zsb);
/*
* Parse and replay the intent log.
*
* Because of ziltest, this must be done after
* zfs_unlinked_drain(). (Further note: ziltest
* doesn't use readonly mounts, where
* zfs_unlinked_drain() isn't called.) This is because
* ziltest causes spa_sync() to think it's committed,
* but actually it is not, so the intent log contains
* many txg's worth of changes.
*
* In particular, if object N is in the unlinked set in
* the last txg to actually sync, then it could be
* actually freed in a later txg and then reallocated
* in a yet later txg. This would write a "create
* object N" record to the intent log. Normally, this
* would be fine because the spa_sync() would have
* written out the fact that object N is free, before
* we could write the "create object N" intent log
* record.
*
* But when we are in ziltest mode, we advance the "open
* txg" without actually spa_sync()-ing the changes to
* disk. So we would see that object N is still
* allocated and in the unlinked set, and there is an
* intent log record saying to allocate it.
*/
if (spa_writeable(dmu_objset_spa(zsb->z_os))) {
if (zil_replay_disable) {
zil_destroy(zsb->z_log, B_FALSE);
} else {
zsb->z_replay = B_TRUE;
zil_replay(zsb->z_os, zsb,
zfs_replay_vector);
zsb->z_replay = B_FALSE;
}
}
/* restore readonly bit */
if (readonly != 0)
readonly_changed_cb(zsb, B_TRUE);
}
return (0);
}
EXPORT_SYMBOL(zfs_sb_setup);
void
zfs_sb_free(zfs_sb_t *zsb)
{
int i;
zfs_fuid_destroy(zsb);
mutex_destroy(&zsb->z_znodes_lock);
mutex_destroy(&zsb->z_lock);
list_destroy(&zsb->z_all_znodes);
rrw_destroy(&zsb->z_teardown_lock);
rw_destroy(&zsb->z_teardown_inactive_lock);
rw_destroy(&zsb->z_fuid_lock);
for (i = 0; i != ZFS_OBJ_MTX_SZ; i++)
mutex_destroy(&zsb->z_hold_mtx[i]);
kmem_free(zsb, sizeof (zfs_sb_t));
}
EXPORT_SYMBOL(zfs_sb_free);
static void
zfs_set_fuid_feature(zfs_sb_t *zsb)
{
zsb->z_use_fuids = USE_FUIDS(zsb->z_version, zsb->z_os);
zsb->z_use_sa = USE_SA(zsb->z_version, zsb->z_os);
}
void
zfs_unregister_callbacks(zfs_sb_t *zsb)
{
objset_t *os = zsb->z_os;
struct dsl_dataset *ds;
/*
* Unregister properties.
*/
if (!dmu_objset_is_snapshot(os)) {
ds = dmu_objset_ds(os);
VERIFY(dsl_prop_unregister(ds, "atime", atime_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "xattr", xattr_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "recordsize", blksz_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "readonly", readonly_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "devices", devices_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "setuid", setuid_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "exec", exec_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "snapdir", snapdir_changed_cb,
zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "aclinherit",
acl_inherit_changed_cb, zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "vscan",
vscan_changed_cb, zsb) == 0);
VERIFY(dsl_prop_unregister(ds, "nbmand",
nbmand_changed_cb, zsb) == 0);
}
}
EXPORT_SYMBOL(zfs_unregister_callbacks);
#ifdef HAVE_MLSLABEL
/*
* zfs_check_global_label:
* Check that the hex label string is appropriate for the dataset
* being mounted into the global_zone proper.
*
* Return an error if the hex label string is not default or
* admin_low/admin_high. For admin_low labels, the corresponding
* dataset must be readonly.
*/
int
zfs_check_global_label(const char *dsname, const char *hexsl)
{
if (strcasecmp(hexsl, ZFS_MLSLABEL_DEFAULT) == 0)
return (0);
if (strcasecmp(hexsl, ADMIN_HIGH) == 0)
return (0);
if (strcasecmp(hexsl, ADMIN_LOW) == 0) {
/* must be readonly */
uint64_t rdonly;
if (dsl_prop_get_integer(dsname,
zfs_prop_to_name(ZFS_PROP_READONLY), &rdonly, NULL))
return (EACCES);
return (rdonly ? 0 : EACCES);
}
return (EACCES);
}
EXPORT_SYMBOL(zfs_check_global_label);
#endif /* HAVE_MLSLABEL */
int
zfs_statvfs(struct dentry *dentry, struct kstatfs *statp)
{
zfs_sb_t *zsb = dentry->d_sb->s_fs_info;
uint64_t refdbytes, availbytes, usedobjs, availobjs;
uint32_t bshift;
ZFS_ENTER(zsb);
dmu_objset_space(zsb->z_os,
&refdbytes, &availbytes, &usedobjs, &availobjs);
/*
* The underlying storage pool actually uses multiple block
* size. Under Solaris frsize (fragment size) is reported as
* the smallest block size we support, and bsize (block size)
* as the filesystem's maximum block size. Unfortunately,
* under Linux the fragment size and block size are often used
* interchangeably. Thus we are forced to report both of them
* as the filesystem's maximum block size.
*/
statp->f_frsize = zsb->z_max_blksz;
statp->f_bsize = zsb->z_max_blksz;
bshift = fls(statp->f_bsize) - 1;
/*
* The following report "total" blocks of various kinds in
* the file system, but reported in terms of f_bsize - the
* "preferred" size.
*/
statp->f_blocks = (refdbytes + availbytes) >> bshift;
statp->f_bfree = availbytes >> bshift;
statp->f_bavail = statp->f_bfree; /* no root reservation */
/*
* statvfs() should really be called statufs(), because it assumes
* static metadata. ZFS doesn't preallocate files, so the best
* we can do is report the max that could possibly fit in f_files,
* and that minus the number actually used in f_ffree.
* For f_ffree, report the smaller of the number of object available
* and the number of blocks (each object will take at least a block).
*/
statp->f_ffree = MIN(availobjs, availbytes >> DNODE_SHIFT);
statp->f_files = statp->f_ffree + usedobjs;
statp->f_fsid.val[0] = dentry->d_sb->s_dev;
statp->f_fsid.val[1] = 0;
statp->f_type = ZFS_SUPER_MAGIC;
statp->f_namelen = ZFS_MAXNAMELEN;
/*
* We have all of 40 characters to stuff a string here.
* Is there anything useful we could/should provide?
*/
bzero(statp->f_spare, sizeof (statp->f_spare));
ZFS_EXIT(zsb);
return (0);
}
EXPORT_SYMBOL(zfs_statvfs);
int
zfs_root(zfs_sb_t *zsb, struct inode **ipp)
{
znode_t *rootzp;
int error;
ZFS_ENTER(zsb);
error = zfs_zget(zsb, zsb->z_root, &rootzp);
if (error == 0)
*ipp = ZTOI(rootzp);
ZFS_EXIT(zsb);
return (error);
}
EXPORT_SYMBOL(zfs_root);
#ifdef HAVE_SHRINK
int
zfs_sb_prune(struct super_block *sb, unsigned long nr_to_scan, int *objects)
{
zfs_sb_t *zsb = sb->s_fs_info;
struct shrinker *shrinker = &sb->s_shrink;
struct shrink_control sc = {
.nr_to_scan = nr_to_scan,
.gfp_mask = GFP_KERNEL,
};
ZFS_ENTER(zsb);
*objects = (*shrinker->shrink)(shrinker, &sc);
ZFS_EXIT(zsb);
return (0);
}
EXPORT_SYMBOL(zfs_sb_prune);
#endif /* HAVE_SHRINK */
/*
* Teardown the zfs_sb_t::z_os.
*
* Note, if 'unmounting' if FALSE, we return with the 'z_teardown_lock'
* and 'z_teardown_inactive_lock' held.
*/
int
zfs_sb_teardown(zfs_sb_t *zsb, boolean_t unmounting)
{
znode_t *zp;
rrw_enter(&zsb->z_teardown_lock, RW_WRITER, FTAG);
if (!unmounting) {
/*
* We purge the parent filesystem's super block as the
* parent filesystem and all of its snapshots have their
* inode's super block set to the parent's filesystem's
* super block. Note, 'z_parent' is self referential
* for non-snapshots.
*/
shrink_dcache_sb(zsb->z_parent->z_sb);
(void) spl_invalidate_inodes(zsb->z_parent->z_sb, 0);
}
/*
* Drain the iput_taskq to ensure all active references to the
* zfs_sb_t have been handled only then can it be safely destroyed.
*/
taskq_wait(dsl_pool_iput_taskq(dmu_objset_pool(zsb->z_os)));
/*
* Close the zil. NB: Can't close the zil while zfs_inactive
* threads are blocked as zil_close can call zfs_inactive.
*/
if (zsb->z_log) {
zil_close(zsb->z_log);
zsb->z_log = NULL;
}
rw_enter(&zsb->z_teardown_inactive_lock, RW_WRITER);
/*
* If we are not unmounting (ie: online recv) and someone already
* unmounted this file system while we were doing the switcheroo,
* or a reopen of z_os failed then just bail out now.
*/
if (!unmounting && (zsb->z_unmounted || zsb->z_os == NULL)) {
rw_exit(&zsb->z_teardown_inactive_lock);
rrw_exit(&zsb->z_teardown_lock, FTAG);
return (EIO);
}
/*
* At this point there are no vops active, and any new vops will
* fail with EIO since we have z_teardown_lock for writer (only
* relavent for forced unmount).
*
* Release all holds on dbufs.
*/
mutex_enter(&zsb->z_znodes_lock);
for (zp = list_head(&zsb->z_all_znodes); zp != NULL;
zp = list_next(&zsb->z_all_znodes, zp))
if (zp->z_sa_hdl) {
ASSERT(atomic_read(&ZTOI(zp)->i_count) > 0);
zfs_znode_dmu_fini(zp);
}
mutex_exit(&zsb->z_znodes_lock);
/*
* If we are unmounting, set the unmounted flag and let new vops
* unblock. zfs_inactive will have the unmounted behavior, and all
* other vops will fail with EIO.
*/
if (unmounting) {
zsb->z_unmounted = B_TRUE;
rrw_exit(&zsb->z_teardown_lock, FTAG);
rw_exit(&zsb->z_teardown_inactive_lock);
}
/*
* z_os will be NULL if there was an error in attempting to reopen
* zsb, so just return as the properties had already been
*
* unregistered and cached data had been evicted before.
*/
if (zsb->z_os == NULL)
return (0);
/*
* Unregister properties.
*/
zfs_unregister_callbacks(zsb);
/*
* Evict cached data
*/
if (dmu_objset_is_dirty_anywhere(zsb->z_os))
if (!zfs_is_readonly(zsb))
txg_wait_synced(dmu_objset_pool(zsb->z_os), 0);
(void) dmu_objset_evict_dbufs(zsb->z_os);
return (0);
}
EXPORT_SYMBOL(zfs_sb_teardown);
#if defined(HAVE_BDI) && !defined(HAVE_BDI_SETUP_AND_REGISTER)
atomic_long_t zfs_bdi_seq = ATOMIC_LONG_INIT(0);
#endif /* HAVE_BDI && !HAVE_BDI_SETUP_AND_REGISTER */
int
zfs_domount(struct super_block *sb, void *data, int silent)
{
zpl_mount_data_t *zmd = data;
const char *osname = zmd->z_osname;
zfs_sb_t *zsb;
struct inode *root_inode;
uint64_t recordsize;
int error;
error = zfs_sb_create(osname, &zsb);
if (error)
return (error);
if ((error = dsl_prop_get_integer(osname, "recordsize",
&recordsize, NULL)))
goto out;
zsb->z_sb = sb;
sb->s_fs_info = zsb;
sb->s_magic = ZFS_SUPER_MAGIC;
sb->s_maxbytes = MAX_LFS_FILESIZE;
sb->s_time_gran = 1;
sb->s_blocksize = recordsize;
sb->s_blocksize_bits = ilog2(recordsize);
#ifdef HAVE_BDI
/*
* 2.6.32 API change,
* Added backing_device_info (BDI) per super block interfaces. A BDI
* must be configured when using a non-device backed filesystem for
* proper writeback. This is not required for older pdflush kernels.
*
* NOTE: Linux read-ahead is disabled in favor of zfs read-ahead.
*/
zsb->z_bdi.ra_pages = 0;
sb->s_bdi = &zsb->z_bdi;
error = -bdi_setup_and_register(&zsb->z_bdi, "zfs", BDI_CAP_MAP_COPY);
if (error)
goto out;
#endif /* HAVE_BDI */
/* Set callback operations for the file system. */
sb->s_op = &zpl_super_operations;
sb->s_xattr = zpl_xattr_handlers;
sb->s_export_op = &zpl_export_operations;
/* Set features for file system. */
zfs_set_fuid_feature(zsb);
if (dmu_objset_is_snapshot(zsb->z_os)) {
uint64_t pval;
atime_changed_cb(zsb, B_FALSE);
readonly_changed_cb(zsb, B_TRUE);
if ((error = dsl_prop_get_integer(osname,"xattr",&pval,NULL)))
goto out;
xattr_changed_cb(zsb, pval);
zsb->z_issnap = B_TRUE;
zsb->z_os->os_sync = ZFS_SYNC_DISABLED;
mutex_enter(&zsb->z_os->os_user_ptr_lock);
dmu_objset_set_user(zsb->z_os, zsb);
mutex_exit(&zsb->z_os->os_user_ptr_lock);
} else {
error = zfs_sb_setup(zsb, B_TRUE);
#ifdef HAVE_SNAPSHOT
(void) zfs_snap_create(zsb);
#endif /* HAVE_SNAPSHOT */
}
/* Allocate a root inode for the filesystem. */
error = zfs_root(zsb, &root_inode);
if (error) {
(void) zfs_umount(sb);
goto out;
}
/* Allocate a root dentry for the filesystem */
sb->s_root = d_alloc_root(root_inode);
if (sb->s_root == NULL) {
(void) zfs_umount(sb);
error = ENOMEM;
goto out;
}
out:
if (error) {
dmu_objset_disown(zsb->z_os, zsb);
zfs_sb_free(zsb);
}
return (error);
}
EXPORT_SYMBOL(zfs_domount);
/*ARGSUSED*/
int
zfs_umount(struct super_block *sb)
{
zfs_sb_t *zsb = sb->s_fs_info;
objset_t *os;
VERIFY(zfs_sb_teardown(zsb, B_TRUE) == 0);
os = zsb->z_os;
#ifdef HAVE_BDI
bdi_destroy(sb->s_bdi);
#endif /* HAVE_BDI */
/*
* z_os will be NULL if there was an error in
* attempting to reopen zsb.
*/
if (os != NULL) {
/*
* Unset the objset user_ptr.
*/
mutex_enter(&os->os_user_ptr_lock);
dmu_objset_set_user(os, NULL);
mutex_exit(&os->os_user_ptr_lock);
/*
* Finally release the objset
*/
dmu_objset_disown(os, zsb);
}
zfs_sb_free(zsb);
return (0);
}
EXPORT_SYMBOL(zfs_umount);
int
zfs_remount(struct super_block *sb, int *flags, char *data)
{
/*
* All namespace flags (MNT_*) and super block flags (MS_*) will
* be handled by the Linux VFS. Only handle custom options here.
*/
return (0);
}
EXPORT_SYMBOL(zfs_remount);
int
zfs_vget(struct super_block *sb, struct inode **ipp, fid_t *fidp)
{
zfs_sb_t *zsb = sb->s_fs_info;
znode_t *zp;
uint64_t object = 0;
uint64_t fid_gen = 0;
uint64_t gen_mask;
uint64_t zp_gen;
int i, err;
*ipp = NULL;
ZFS_ENTER(zsb);
if (fidp->fid_len == LONG_FID_LEN) {
zfid_long_t *zlfid = (zfid_long_t *)fidp;
uint64_t objsetid = 0;
uint64_t setgen = 0;
for (i = 0; i < sizeof (zlfid->zf_setid); i++)
objsetid |= ((uint64_t)zlfid->zf_setid[i]) << (8 * i);
for (i = 0; i < sizeof (zlfid->zf_setgen); i++)
setgen |= ((uint64_t)zlfid->zf_setgen[i]) << (8 * i);
ZFS_EXIT(zsb);
#ifdef HAVE_SNAPSHOT
err = zfsctl_lookup_objset(vfsp, objsetid, &zsb);
if (err)
return (EINVAL);
#endif /* HAVE_SNAPSHOT */
ZFS_ENTER(zsb);
}
if (fidp->fid_len == SHORT_FID_LEN || fidp->fid_len == LONG_FID_LEN) {
zfid_short_t *zfid = (zfid_short_t *)fidp;
for (i = 0; i < sizeof (zfid->zf_object); i++)
object |= ((uint64_t)zfid->zf_object[i]) << (8 * i);
for (i = 0; i < sizeof (zfid->zf_gen); i++)
fid_gen |= ((uint64_t)zfid->zf_gen[i]) << (8 * i);
} else {
ZFS_EXIT(zsb);
return (EINVAL);
}
#ifdef HAVE_SNAPSHOT
/* A zero fid_gen means we are in the .zfs control directories */
if (fid_gen == 0 &&
(object == ZFSCTL_INO_ROOT || object == ZFSCTL_INO_SNAPDIR)) {
*ipp = zsb->z_ctldir;
ASSERT(*ipp != NULL);
if (object == ZFSCTL_INO_SNAPDIR) {
VERIFY(zfsctl_root_lookup(*ipp, "snapshot", ipp, NULL,
0, NULL, NULL, NULL, NULL, NULL) == 0);
} else {
igrab(*ipp);
}
ZFS_EXIT(zsb);
return (0);
}
#endif /* HAVE_SNAPSHOT */
gen_mask = -1ULL >> (64 - 8 * i);
dprintf("getting %llu [%u mask %llx]\n", object, fid_gen, gen_mask);
if ((err = zfs_zget(zsb, object, &zp))) {
ZFS_EXIT(zsb);
return (err);
}
(void) sa_lookup(zp->z_sa_hdl, SA_ZPL_GEN(zsb), &zp_gen,
sizeof (uint64_t));
zp_gen = zp_gen & gen_mask;
if (zp_gen == 0)
zp_gen = 1;
if (zp->z_unlinked || zp_gen != fid_gen) {
dprintf("znode gen (%u) != fid gen (%u)\n", zp_gen, fid_gen);
iput(ZTOI(zp));
ZFS_EXIT(zsb);
return (EINVAL);
}
*ipp = ZTOI(zp);
if (*ipp)
zfs_inode_update(ITOZ(*ipp));
ZFS_EXIT(zsb);
return (0);
}
EXPORT_SYMBOL(zfs_vget);
/*
* Block out VOPs and close zfs_sb_t::z_os
*
* Note, if successful, then we return with the 'z_teardown_lock' and
* 'z_teardown_inactive_lock' write held.
*/
int
zfs_suspend_fs(zfs_sb_t *zsb)
{
int error;
if ((error = zfs_sb_teardown(zsb, B_FALSE)) != 0)
return (error);
dmu_objset_disown(zsb->z_os, zsb);
return (0);
}
EXPORT_SYMBOL(zfs_suspend_fs);
/*
* Reopen zfs_sb_t::z_os and release VOPs.
*/
int
zfs_resume_fs(zfs_sb_t *zsb, const char *osname)
{
int err, err2;
ASSERT(RRW_WRITE_HELD(&zsb->z_teardown_lock));
ASSERT(RW_WRITE_HELD(&zsb->z_teardown_inactive_lock));
err = dmu_objset_own(osname, DMU_OST_ZFS, B_FALSE, zsb, &zsb->z_os);
if (err) {
zsb->z_os = NULL;
} else {
znode_t *zp;
uint64_t sa_obj = 0;
err2 = zap_lookup(zsb->z_os, MASTER_NODE_OBJ,
ZFS_SA_ATTRS, 8, 1, &sa_obj);
if ((err || err2) && zsb->z_version >= ZPL_VERSION_SA)
goto bail;
if ((err = sa_setup(zsb->z_os, sa_obj,
zfs_attr_table, ZPL_END, &zsb->z_attr_table)) != 0)
goto bail;
VERIFY(zfs_sb_setup(zsb, B_FALSE) == 0);
/*
* Attempt to re-establish all the active znodes with
* their dbufs. If a zfs_rezget() fails, then we'll let
* any potential callers discover that via ZFS_ENTER_VERIFY_VP
* when they try to use their znode.
*/
mutex_enter(&zsb->z_znodes_lock);
for (zp = list_head(&zsb->z_all_znodes); zp;
zp = list_next(&zsb->z_all_znodes, zp)) {
(void) zfs_rezget(zp);
}
mutex_exit(&zsb->z_znodes_lock);
}
bail:
/* release the VOPs */
rw_exit(&zsb->z_teardown_inactive_lock);
rrw_exit(&zsb->z_teardown_lock, FTAG);
if (err) {
/*
* Since we couldn't reopen zfs_sb_t::z_os, force
* unmount this file system.
*/
(void) zfs_umount(zsb->z_sb);
}
return (err);
}
EXPORT_SYMBOL(zfs_resume_fs);
int
zfs_set_version(zfs_sb_t *zsb, uint64_t newvers)
{
int error;
objset_t *os = zsb->z_os;
dmu_tx_t *tx;
if (newvers < ZPL_VERSION_INITIAL || newvers > ZPL_VERSION)
return (EINVAL);
if (newvers < zsb->z_version)
return (EINVAL);
if (zfs_spa_version_map(newvers) >
spa_version(dmu_objset_spa(zsb->z_os)))
return (ENOTSUP);
tx = dmu_tx_create(os);
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_FALSE, ZPL_VERSION_STR);
if (newvers >= ZPL_VERSION_SA && !zsb->z_use_sa) {
dmu_tx_hold_zap(tx, MASTER_NODE_OBJ, B_TRUE,
ZFS_SA_ATTRS);
dmu_tx_hold_zap(tx, DMU_NEW_OBJECT, FALSE, NULL);
}
error = dmu_tx_assign(tx, TXG_WAIT);
if (error) {
dmu_tx_abort(tx);
return (error);
}
error = zap_update(os, MASTER_NODE_OBJ, ZPL_VERSION_STR,
8, 1, &newvers, tx);
if (error) {
dmu_tx_commit(tx);
return (error);
}
if (newvers >= ZPL_VERSION_SA && !zsb->z_use_sa) {
uint64_t sa_obj;
ASSERT3U(spa_version(dmu_objset_spa(zsb->z_os)), >=,
SPA_VERSION_SA);
sa_obj = zap_create(os, DMU_OT_SA_MASTER_NODE,
DMU_OT_NONE, 0, tx);
error = zap_add(os, MASTER_NODE_OBJ,
ZFS_SA_ATTRS, 8, 1, &sa_obj, tx);
ASSERT3U(error, ==, 0);
VERIFY(0 == sa_set_sa_object(os, sa_obj));
sa_register_update_callback(os, zfs_sa_upgrade);
}
spa_history_log_internal(LOG_DS_UPGRADE,
dmu_objset_spa(os), tx, "oldver=%llu newver=%llu dataset = %llu",
zsb->z_version, newvers, dmu_objset_id(os));
dmu_tx_commit(tx);
zsb->z_version = newvers;
if (zsb->z_version >= ZPL_VERSION_FUID)
zfs_set_fuid_feature(zsb);
return (0);
}
EXPORT_SYMBOL(zfs_set_version);
/*
* Read a property stored within the master node.
*/
int
zfs_get_zplprop(objset_t *os, zfs_prop_t prop, uint64_t *value)
{
const char *pname;
int error = ENOENT;
/*
* Look up the file system's value for the property. For the
* version property, we look up a slightly different string.
*/
if (prop == ZFS_PROP_VERSION)
pname = ZPL_VERSION_STR;
else
pname = zfs_prop_to_name(prop);
if (os != NULL)
error = zap_lookup(os, MASTER_NODE_OBJ, pname, 8, 1, value);
if (error == ENOENT) {
/* No value set, use the default value */
switch (prop) {
case ZFS_PROP_VERSION:
*value = ZPL_VERSION;
break;
case ZFS_PROP_NORMALIZE:
case ZFS_PROP_UTF8ONLY:
*value = 0;
break;
case ZFS_PROP_CASE:
*value = ZFS_CASE_SENSITIVE;
break;
default:
return (error);
}
error = 0;
}
return (error);
}
EXPORT_SYMBOL(zfs_get_zplprop);
void
zfs_init(void)
{
zfs_znode_init();
dmu_objset_register_type(DMU_OST_ZFS, zfs_space_delta_cb);
register_filesystem(&zpl_fs_type);
(void) arc_add_prune_callback(zpl_prune_sbs, NULL);
}
void
zfs_fini(void)
{
unregister_filesystem(&zpl_fs_type);
zfs_znode_fini();
}