mirror_zfs/include/sys/sysevent/dev.h
Tony Hutter e27e692bcc
zed: Fix config_sync autoexpand flood
Users were seeing floods of `config_sync` events when autoexpand was
enabled.  This happened because all "disk status change" udev events
invoke the autoexpand codepath, which calls zpool_relabel_disk(),
which in turn cause another "disk status change" event to happen,
in a feedback loop.  Note that "disk status change" happens every time
a user calls close() on a block device.

This commit breaks the feedback loop by only allowing an autoexpand
to happen if the disk actually changed size.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #7132
Closes: #7366
Closes #13729
2022-09-08 10:32:30 -07:00

265 lines
7.6 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or https://opensource.org/licenses/CDDL-1.0.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
#ifndef _SYS_SYSEVENT_DEV_H
#define _SYS_SYSEVENT_DEV_H
#include <sys/sysevent/eventdefs.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Event schema for EC_DEV_ADD/ESC_DISK
*
* Event Class - EC_DEV_ADD
* Event Sub-Class - ESC_DISK
*
* Attribute Name - EV_VERSION
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - event version number
*
* Attribute Name - DEV_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - /dev name to the raw device.
* The name does not include the slice number component.
*
* Attribute Name - DEV_PHYS_PATH
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - physical path of the device without the "/devices"
* prefix.
*
* Attribute Name - DEV_DRIVER_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - driver name
*
* Attribute Name - DEV_INSTANCE
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - driver instance number
*
* Attribute Name - DEV_PROP_PREFIX<devinfo_node_property>
* Attribute Type - data type of the devinfo_node_property
* Attribute Value - value of the devinfo_node_property
*
*
* Event schema for EC_DEV_ADD/ESC_NETWORK
*
* Event Class - EC_DEV_ADD
* Event Sub-Class - ESC_NETWORK
*
* Attribute Name - EV_VERSION
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - event version number
*
* Attribute Name - DEV_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - /dev name associated with the device if exists.
* /dev name associated with the driver for DLPI
* Style-2 only drivers.
*
* Attribute Name - DEV_PHYS_PATH
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - physical path of the device without the "/devices"
* prefix.
*
* Attribute Name - DEV_DRIVER_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - driver name
*
* Attribute Name - DEV_INSTANCE
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - driver instance number
*
* Attribute Name - DEV_PROP_PREFIX<devinfo_node_property>
* Attribute Type - data type of the devinfo_node_property
* Attribute Value - value of the devinfo_node_property
*
*
* Event schema for EC_DEV_ADD/ESC_PRINTER
*
* Event Class - EC_DEV_ADD
* Event Sub-Class - ESC_PRINTER
*
* Attribute Name - EV_VERSION
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - event version number
*
* Attribute Name - DEV_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - /dev/printers name associated with the device
* if exists.
* /dev name associated with the device if it exists
*
* Attribute Name - DEV_PHYS_PATH
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - physical path of the device without the "/devices"
* prefix.
*
* Attribute Name - DEV_DRIVER_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - driver name
*
* Attribute Name - DEV_INSTANCE
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - driver instance number
*
* Attribute Name - DEV_PROP_PREFIX<devinfo_node_property>
* Attribute Type - data type of the devinfo_node_property
* Attribute Value - value of the devinfo_node_property
*
*
* Event schema for EC_DEV_REMOVE/ESC_DISK
*
* Event Class - EC_DEV_REMOVE
* Event Sub-Class - ESC_DISK
*
* Attribute Name - EV_VERSION
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - event version number
*
* Attribute Name - DEV_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - /dev name to the raw device.
* The name does not include the slice number component.
*
* Attribute Name - DEV_PHYS_PATH
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - physical path of the device without the "/devices"
* prefix.
*
* Attribute Name - DEV_DRIVER_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - driver name
*
* Attribute Name - DEV_INSTANCE
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - driver instance number
*
*
* Event schema for EC_DEV_REMOVE/ESC_NETWORK
*
* Event Class - EC_DEV_REMOVE
* Event Sub-Class - ESC_NETWORK
*
* Attribute Name - EV_VERSION
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - event version number
*
* Attribute Name - DEV_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - /dev name associated with the device if exists.
* /dev name associated with the driver for DLPI
* Style-2 only drivers.
*
* Attribute Name - DEV_PHYS_PATH
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - physical path of the device without the "/devices"
* prefix.
*
* Attribute Name - DEV_DRIVER_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - driver name
*
* Attribute Name - DEV_INSTANCE
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - driver instance number
*
*
* Event schema for EC_DEV_REMOVE/ESC_PRINTER
*
* Event Class - EC_DEV_REMOVE
* Event Sub-Class - ESC_PRINTER
*
* Attribute Name - EV_VERSION
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - event version number
*
* Attribute Name - DEV_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - /dev/printers name associated with the device
* if exists.
* /dev name associated with the device if it exists
*
* Attribute Name - DEV_PHYS_PATH
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - physical path of the device without the "/devices"
* prefix.
*
* Attribute Name - DEV_DRIVER_NAME
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - driver name
*
* Attribute Name - DEV_INSTANCE
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - driver instance number
*
*
* Event schema for EC_DEV_BRANCH/ESC_DEV_BRANCH_ADD or ESC_DEV_BRANCH_REMOVE
*
* Event Class - EC_DEV_BRANCH
* Event Sub-Class - ESC_DEV_BRANCH_ADD or ESC_DEV_BRANCH_REMOVE
*
* Attribute Name - EV_VERSION
* Attribute Type - DATA_TYPE_INT32
* Attribute Value - event version number
*
* Attribute Name - DEV_PHYS_PATH
* Attribute Type - DATA_TYPE_STRING
* Attribute Value - physical path to the root node of the device subtree
* without the "/devices" prefix.
*/
#define EV_VERSION "version"
#define DEV_PHYS_PATH "phys_path"
#define DEV_NAME "dev_name"
#define DEV_DRIVER_NAME "driver_name"
#define DEV_INSTANCE "instance"
#define DEV_PROP_PREFIX "prop-"
#ifdef __linux__
#define DEV_IDENTIFIER "devid"
#define DEV_PATH "path"
#define DEV_IS_PART "is_slice"
#define DEV_SIZE "dev_size"
/* Size of the whole parent block device (if dev is a partition) */
#define DEV_PARENT_SIZE "dev_parent_size"
#endif /* __linux__ */
#define EV_V1 1
/* maximum number of devinfo node properties added to the event */
#define MAX_PROP_COUNT 100
/* only properties with size less than PROP_LEN_LIMIT are added to the event */
#define PROP_LEN_LIMIT 1024
#ifdef __cplusplus
}
#endif
#endif /* _SYS_SYSEVENT_DEV_H */