mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-11-17 18:11:00 +03:00
ab8d9c1783
Various module parameters such as `zfs_arc_max` were originally `uint64_t` on OpenSolaris/Illumos, but were changed to `unsigned long` for Linux compatibility because Linux's kernel default module parameter implementation did not support 64-bit types on 32-bit platforms. This caused problems when porting OpenZFS to Windows because its LLP64 memory model made `unsigned long` a 32-bit type on 64-bit, which created the undesireable situation that parameters that should accept 64-bit values could not on 64-bit Windows. Upon inspection, it turns out that the Linux kernel module parameter interface is extensible, such that we are allowed to define our own types. Rather than maintaining the original type change via hacks to to continue shrinking module parameters on 32-bit Linux, we implement support for 64-bit module parameters on Linux. After doing a review of all 64-bit kernel parameters (found via the man page and also proposed changes by Andrew Innes), the kernel module parameters fell into a few groups: Parameters that were originally 64-bit on Illumos: * dbuf_cache_max_bytes * dbuf_metadata_cache_max_bytes * l2arc_feed_min_ms * l2arc_feed_secs * l2arc_headroom * l2arc_headroom_boost * l2arc_write_boost * l2arc_write_max * metaslab_aliquot * metaslab_force_ganging * zfetch_array_rd_sz * zfs_arc_max * zfs_arc_meta_limit * zfs_arc_meta_min * zfs_arc_min * zfs_async_block_max_blocks * zfs_condense_max_obsolete_bytes * zfs_condense_min_mapping_bytes * zfs_deadman_checktime_ms * zfs_deadman_synctime_ms * zfs_initialize_chunk_size * zfs_initialize_value * zfs_lua_max_instrlimit * zfs_lua_max_memlimit * zil_slog_bulk Parameters that were originally 32-bit on Illumos: * zfs_per_txg_dirty_frees_percent Parameters that were originally `ssize_t` on Illumos: * zfs_immediate_write_sz Note that `ssize_t` is `int32_t` on 32-bit and `int64_t` on 64-bit. It has been upgraded to 64-bit. Parameters that were `long`/`unsigned long` because of Linux/FreeBSD influence: * l2arc_rebuild_blocks_min_l2size * zfs_key_max_salt_uses * zfs_max_log_walking * zfs_max_logsm_summary_length * zfs_metaslab_max_size_cache_sec * zfs_min_metaslabs_to_flush * zfs_multihost_interval * zfs_unflushed_log_block_max * zfs_unflushed_log_block_min * zfs_unflushed_log_block_pct * zfs_unflushed_max_mem_amt * zfs_unflushed_max_mem_ppm New parameters that do not exist in Illumos: * l2arc_trim_ahead * vdev_file_logical_ashift * vdev_file_physical_ashift * zfs_arc_dnode_limit * zfs_arc_dnode_limit_percent * zfs_arc_dnode_reduce_percent * zfs_arc_meta_limit_percent * zfs_arc_sys_free * zfs_deadman_ziotime_ms * zfs_delete_blocks * zfs_history_output_max * zfs_livelist_max_entries * zfs_max_async_dedup_frees * zfs_max_nvlist_src_size * zfs_rebuild_max_segment * zfs_rebuild_vdev_limit * zfs_unflushed_log_txg_max * zfs_vdev_max_auto_ashift * zfs_vdev_min_auto_ashift * zfs_vnops_read_chunk_size * zvol_max_discard_blocks Rather than clutter the lists with commentary, the module parameters that need comments are repeated below. A few parameters were defined in Linux/FreeBSD specific code, where the use of ulong/long is not an issue for portability, so we leave them alone: * zfs_delete_blocks * zfs_key_max_salt_uses * zvol_max_discard_blocks The documentation for a few parameters was found to be incorrect: * zfs_deadman_checktime_ms - incorrectly documented as int * zfs_delete_blocks - not documented as Linux only * zfs_history_output_max - incorrectly documented as int * zfs_vnops_read_chunk_size - incorrectly documented as long * zvol_max_discard_blocks - incorrectly documented as ulong The documentation for these has been fixed, alongside the changes to document the switch to fixed width types. In addition, several kernel module parameters were percentages or held ashift values, so being 64-bit never made sense for them. They have been downgraded to 32-bit: * vdev_file_logical_ashift * vdev_file_physical_ashift * zfs_arc_dnode_limit_percent * zfs_arc_dnode_reduce_percent * zfs_arc_meta_limit_percent * zfs_per_txg_dirty_frees_percent * zfs_unflushed_log_block_pct * zfs_vdev_max_auto_ashift * zfs_vdev_min_auto_ashift Of special note are `zfs_vdev_max_auto_ashift` and `zfs_vdev_min_auto_ashift`, which were already defined as `uint64_t`, and passed to the kernel as `ulong`. This is inherently buggy on big endian 32-bit Linux, since the values would not be written to the correct locations. 32-bit FreeBSD was unaffected because its sysctl code correctly treated this as a `uint64_t`. Lastly, a code comment suggests that `zfs_arc_sys_free` is Linux-specific, but there is nothing to indicate to me that it is Linux-specific. Nothing was done about that. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Original-patch-by: Andrew Innes <andrew.c12@gmail.com> Original-patch-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu> Closes #13984 Closes #14004
541 lines
15 KiB
C
541 lines
15 KiB
C
/*
|
|
* CDDL HEADER START
|
|
*
|
|
* The contents of this file are subject to the terms of the
|
|
* Common Development and Distribution License (the "License").
|
|
* You may not use this file except in compliance with the License.
|
|
*
|
|
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
|
|
* or https://opensource.org/licenses/CDDL-1.0.
|
|
* See the License for the specific language governing permissions
|
|
* and limitations under the License.
|
|
*
|
|
* When distributing Covered Code, include this CDDL HEADER in each
|
|
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
|
|
* If applicable, add the following below this CDDL HEADER, with the
|
|
* fields enclosed by brackets "[]" replaced with your own identifying
|
|
* information: Portions Copyright [yyyy] [name of copyright owner]
|
|
*
|
|
* CDDL HEADER END
|
|
*/
|
|
/*
|
|
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
|
|
* Copyright (c) 2018, Joyent, Inc.
|
|
* Copyright (c) 2011, 2019 by Delphix. All rights reserved.
|
|
* Copyright (c) 2014 by Saso Kiselkov. All rights reserved.
|
|
* Copyright 2017 Nexenta Systems, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <sys/spa.h>
|
|
#include <sys/zio.h>
|
|
#include <sys/spa_impl.h>
|
|
#include <sys/zio_compress.h>
|
|
#include <sys/zio_checksum.h>
|
|
#include <sys/zfs_context.h>
|
|
#include <sys/arc.h>
|
|
#include <sys/zfs_refcount.h>
|
|
#include <sys/vdev.h>
|
|
#include <sys/vdev_trim.h>
|
|
#include <sys/vdev_impl.h>
|
|
#include <sys/dsl_pool.h>
|
|
#include <sys/multilist.h>
|
|
#include <sys/abd.h>
|
|
#include <sys/zil.h>
|
|
#include <sys/fm/fs/zfs.h>
|
|
#ifdef _KERNEL
|
|
#include <sys/shrinker.h>
|
|
#include <sys/vmsystm.h>
|
|
#include <sys/zpl.h>
|
|
#include <linux/page_compat.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/memory.h>
|
|
#endif
|
|
#include <sys/callb.h>
|
|
#include <sys/kstat.h>
|
|
#include <sys/zthr.h>
|
|
#include <zfs_fletcher.h>
|
|
#include <sys/arc_impl.h>
|
|
#include <sys/trace_zfs.h>
|
|
#include <sys/aggsum.h>
|
|
|
|
/*
|
|
* This is a limit on how many pages the ARC shrinker makes available for
|
|
* eviction in response to one page allocation attempt. Note that in
|
|
* practice, the kernel's shrinker can ask us to evict up to about 4x this
|
|
* for one allocation attempt.
|
|
*
|
|
* The default limit of 10,000 (in practice, 160MB per allocation attempt
|
|
* with 4K pages) limits the amount of time spent attempting to reclaim ARC
|
|
* memory to less than 100ms per allocation attempt, even with a small
|
|
* average compressed block size of ~8KB.
|
|
*
|
|
* See also the comment in arc_shrinker_count().
|
|
* Set to 0 to disable limit.
|
|
*/
|
|
int zfs_arc_shrinker_limit = 10000;
|
|
|
|
#ifdef CONFIG_MEMORY_HOTPLUG
|
|
static struct notifier_block arc_hotplug_callback_mem_nb;
|
|
#endif
|
|
|
|
/*
|
|
* Return a default max arc size based on the amount of physical memory.
|
|
*/
|
|
uint64_t
|
|
arc_default_max(uint64_t min, uint64_t allmem)
|
|
{
|
|
/* Default to 1/2 of all memory. */
|
|
return (MAX(allmem / 2, min));
|
|
}
|
|
|
|
#ifdef _KERNEL
|
|
/*
|
|
* Return maximum amount of memory that we could possibly use. Reduced
|
|
* to half of all memory in user space which is primarily used for testing.
|
|
*/
|
|
uint64_t
|
|
arc_all_memory(void)
|
|
{
|
|
#ifdef CONFIG_HIGHMEM
|
|
return (ptob(zfs_totalram_pages - zfs_totalhigh_pages));
|
|
#else
|
|
return (ptob(zfs_totalram_pages));
|
|
#endif /* CONFIG_HIGHMEM */
|
|
}
|
|
|
|
/*
|
|
* Return the amount of memory that is considered free. In user space
|
|
* which is primarily used for testing we pretend that free memory ranges
|
|
* from 0-20% of all memory.
|
|
*/
|
|
uint64_t
|
|
arc_free_memory(void)
|
|
{
|
|
#ifdef CONFIG_HIGHMEM
|
|
struct sysinfo si;
|
|
si_meminfo(&si);
|
|
return (ptob(si.freeram - si.freehigh));
|
|
#else
|
|
return (ptob(nr_free_pages() +
|
|
nr_inactive_file_pages()));
|
|
#endif /* CONFIG_HIGHMEM */
|
|
}
|
|
|
|
/*
|
|
* Return the amount of memory that can be consumed before reclaim will be
|
|
* needed. Positive if there is sufficient free memory, negative indicates
|
|
* the amount of memory that needs to be freed up.
|
|
*/
|
|
int64_t
|
|
arc_available_memory(void)
|
|
{
|
|
return (arc_free_memory() - arc_sys_free);
|
|
}
|
|
|
|
static uint64_t
|
|
arc_evictable_memory(void)
|
|
{
|
|
int64_t asize = aggsum_value(&arc_sums.arcstat_size);
|
|
uint64_t arc_clean =
|
|
zfs_refcount_count(&arc_mru->arcs_esize[ARC_BUFC_DATA]) +
|
|
zfs_refcount_count(&arc_mru->arcs_esize[ARC_BUFC_METADATA]) +
|
|
zfs_refcount_count(&arc_mfu->arcs_esize[ARC_BUFC_DATA]) +
|
|
zfs_refcount_count(&arc_mfu->arcs_esize[ARC_BUFC_METADATA]);
|
|
uint64_t arc_dirty = MAX((int64_t)asize - (int64_t)arc_clean, 0);
|
|
|
|
/*
|
|
* Scale reported evictable memory in proportion to page cache, cap
|
|
* at specified min/max.
|
|
*/
|
|
uint64_t min = (ptob(nr_file_pages()) / 100) * zfs_arc_pc_percent;
|
|
min = MAX(arc_c_min, MIN(arc_c_max, min));
|
|
|
|
if (arc_dirty >= min)
|
|
return (arc_clean);
|
|
|
|
return (MAX((int64_t)asize - (int64_t)min, 0));
|
|
}
|
|
|
|
/*
|
|
* The _count() function returns the number of free-able objects.
|
|
* The _scan() function returns the number of objects that were freed.
|
|
*/
|
|
static unsigned long
|
|
arc_shrinker_count(struct shrinker *shrink, struct shrink_control *sc)
|
|
{
|
|
/*
|
|
* __GFP_FS won't be set if we are called from ZFS code (see
|
|
* kmem_flags_convert(), which removes it). To avoid a deadlock, we
|
|
* don't allow evicting in this case. We return 0 rather than
|
|
* SHRINK_STOP so that the shrinker logic doesn't accumulate a
|
|
* deficit against us.
|
|
*/
|
|
if (!(sc->gfp_mask & __GFP_FS)) {
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* This code is reached in the "direct reclaim" case, where the
|
|
* kernel (outside ZFS) is trying to allocate a page, and the system
|
|
* is low on memory.
|
|
*
|
|
* The kernel's shrinker code doesn't understand how many pages the
|
|
* ARC's callback actually frees, so it may ask the ARC to shrink a
|
|
* lot for one page allocation. This is problematic because it may
|
|
* take a long time, thus delaying the page allocation, and because
|
|
* it may force the ARC to unnecessarily shrink very small.
|
|
*
|
|
* Therefore, we limit the amount of data that we say is evictable,
|
|
* which limits the amount that the shrinker will ask us to evict for
|
|
* one page allocation attempt.
|
|
*
|
|
* In practice, we may be asked to shrink 4x the limit to satisfy one
|
|
* page allocation, before the kernel's shrinker code gives up on us.
|
|
* When that happens, we rely on the kernel code to find the pages
|
|
* that we freed before invoking the OOM killer. This happens in
|
|
* __alloc_pages_slowpath(), which retries and finds the pages we
|
|
* freed when it calls get_page_from_freelist().
|
|
*
|
|
* See also the comment above zfs_arc_shrinker_limit.
|
|
*/
|
|
int64_t limit = zfs_arc_shrinker_limit != 0 ?
|
|
zfs_arc_shrinker_limit : INT64_MAX;
|
|
return (MIN(limit, btop((int64_t)arc_evictable_memory())));
|
|
}
|
|
|
|
static unsigned long
|
|
arc_shrinker_scan(struct shrinker *shrink, struct shrink_control *sc)
|
|
{
|
|
ASSERT((sc->gfp_mask & __GFP_FS) != 0);
|
|
|
|
/* The arc is considered warm once reclaim has occurred */
|
|
if (unlikely(arc_warm == B_FALSE))
|
|
arc_warm = B_TRUE;
|
|
|
|
/*
|
|
* Evict the requested number of pages by reducing arc_c and waiting
|
|
* for the requested amount of data to be evicted.
|
|
*/
|
|
arc_reduce_target_size(ptob(sc->nr_to_scan));
|
|
arc_wait_for_eviction(ptob(sc->nr_to_scan), B_FALSE);
|
|
if (current->reclaim_state != NULL)
|
|
current->reclaim_state->reclaimed_slab += sc->nr_to_scan;
|
|
|
|
/*
|
|
* We are experiencing memory pressure which the arc_evict_zthr was
|
|
* unable to keep up with. Set arc_no_grow to briefly pause arc
|
|
* growth to avoid compounding the memory pressure.
|
|
*/
|
|
arc_no_grow = B_TRUE;
|
|
|
|
/*
|
|
* When direct reclaim is observed it usually indicates a rapid
|
|
* increase in memory pressure. This occurs because the kswapd
|
|
* threads were unable to asynchronously keep enough free memory
|
|
* available.
|
|
*/
|
|
if (current_is_kswapd()) {
|
|
ARCSTAT_BUMP(arcstat_memory_indirect_count);
|
|
} else {
|
|
ARCSTAT_BUMP(arcstat_memory_direct_count);
|
|
}
|
|
|
|
return (sc->nr_to_scan);
|
|
}
|
|
|
|
SPL_SHRINKER_DECLARE(arc_shrinker,
|
|
arc_shrinker_count, arc_shrinker_scan, DEFAULT_SEEKS);
|
|
|
|
int
|
|
arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg)
|
|
{
|
|
uint64_t free_memory = arc_free_memory();
|
|
|
|
if (free_memory > arc_all_memory() * arc_lotsfree_percent / 100)
|
|
return (0);
|
|
|
|
if (txg > spa->spa_lowmem_last_txg) {
|
|
spa->spa_lowmem_last_txg = txg;
|
|
spa->spa_lowmem_page_load = 0;
|
|
}
|
|
/*
|
|
* If we are in pageout, we know that memory is already tight,
|
|
* the arc is already going to be evicting, so we just want to
|
|
* continue to let page writes occur as quickly as possible.
|
|
*/
|
|
if (current_is_kswapd()) {
|
|
if (spa->spa_lowmem_page_load >
|
|
MAX(arc_sys_free / 4, free_memory) / 4) {
|
|
DMU_TX_STAT_BUMP(dmu_tx_memory_reclaim);
|
|
return (SET_ERROR(ERESTART));
|
|
}
|
|
/* Note: reserve is inflated, so we deflate */
|
|
atomic_add_64(&spa->spa_lowmem_page_load, reserve / 8);
|
|
return (0);
|
|
} else if (spa->spa_lowmem_page_load > 0 && arc_reclaim_needed()) {
|
|
/* memory is low, delay before restarting */
|
|
ARCSTAT_INCR(arcstat_memory_throttle_count, 1);
|
|
DMU_TX_STAT_BUMP(dmu_tx_memory_reclaim);
|
|
return (SET_ERROR(EAGAIN));
|
|
}
|
|
spa->spa_lowmem_page_load = 0;
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
arc_set_sys_free(uint64_t allmem)
|
|
{
|
|
/*
|
|
* The ARC tries to keep at least this much memory available for the
|
|
* system. This gives the ARC time to shrink in response to memory
|
|
* pressure, before running completely out of memory and invoking the
|
|
* direct-reclaim ARC shrinker.
|
|
*
|
|
* This should be more than twice high_wmark_pages(), so that
|
|
* arc_wait_for_eviction() will wait until at least the
|
|
* high_wmark_pages() are free (see arc_evict_state_impl()).
|
|
*
|
|
* Note: Even when the system is very low on memory, the kernel's
|
|
* shrinker code may only ask for one "batch" of pages (512KB) to be
|
|
* evicted. If concurrent allocations consume these pages, there may
|
|
* still be insufficient free pages, and the OOM killer takes action.
|
|
*
|
|
* By setting arc_sys_free large enough, and having
|
|
* arc_wait_for_eviction() wait until there is at least arc_sys_free/2
|
|
* free memory, it is much less likely that concurrent allocations can
|
|
* consume all the memory that was evicted before checking for
|
|
* OOM.
|
|
*
|
|
* It's hard to iterate the zones from a linux kernel module, which
|
|
* makes it difficult to determine the watermark dynamically. Instead
|
|
* we compute the maximum high watermark for this system, based
|
|
* on the amount of memory, assuming default parameters on Linux kernel
|
|
* 5.3.
|
|
*/
|
|
|
|
/*
|
|
* Base wmark_low is 4 * the square root of Kbytes of RAM.
|
|
*/
|
|
long wmark = 4 * int_sqrt(allmem/1024) * 1024;
|
|
|
|
/*
|
|
* Clamp to between 128K and 64MB.
|
|
*/
|
|
wmark = MAX(wmark, 128 * 1024);
|
|
wmark = MIN(wmark, 64 * 1024 * 1024);
|
|
|
|
/*
|
|
* watermark_boost can increase the wmark by up to 150%.
|
|
*/
|
|
wmark += wmark * 150 / 100;
|
|
|
|
/*
|
|
* arc_sys_free needs to be more than 2x the watermark, because
|
|
* arc_wait_for_eviction() waits for half of arc_sys_free. Bump this up
|
|
* to 3x to ensure we're above it.
|
|
*/
|
|
arc_sys_free = wmark * 3 + allmem / 32;
|
|
}
|
|
|
|
void
|
|
arc_lowmem_init(void)
|
|
{
|
|
uint64_t allmem = arc_all_memory();
|
|
|
|
/*
|
|
* Register a shrinker to support synchronous (direct) memory
|
|
* reclaim from the arc. This is done to prevent kswapd from
|
|
* swapping out pages when it is preferable to shrink the arc.
|
|
*/
|
|
spl_register_shrinker(&arc_shrinker);
|
|
arc_set_sys_free(allmem);
|
|
}
|
|
|
|
void
|
|
arc_lowmem_fini(void)
|
|
{
|
|
spl_unregister_shrinker(&arc_shrinker);
|
|
}
|
|
|
|
int
|
|
param_set_arc_u64(const char *buf, zfs_kernel_param_t *kp)
|
|
{
|
|
int error;
|
|
|
|
error = spl_param_set_u64(buf, kp);
|
|
if (error < 0)
|
|
return (SET_ERROR(error));
|
|
|
|
arc_tuning_update(B_TRUE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
param_set_arc_min(const char *buf, zfs_kernel_param_t *kp)
|
|
{
|
|
return (param_set_arc_u64(buf, kp));
|
|
}
|
|
|
|
int
|
|
param_set_arc_max(const char *buf, zfs_kernel_param_t *kp)
|
|
{
|
|
return (param_set_arc_u64(buf, kp));
|
|
}
|
|
|
|
int
|
|
param_set_arc_int(const char *buf, zfs_kernel_param_t *kp)
|
|
{
|
|
int error;
|
|
|
|
error = param_set_int(buf, kp);
|
|
if (error < 0)
|
|
return (SET_ERROR(error));
|
|
|
|
arc_tuning_update(B_TRUE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#ifdef CONFIG_MEMORY_HOTPLUG
|
|
static int
|
|
arc_hotplug_callback(struct notifier_block *self, unsigned long action,
|
|
void *arg)
|
|
{
|
|
(void) self, (void) arg;
|
|
uint64_t allmem = arc_all_memory();
|
|
if (action != MEM_ONLINE)
|
|
return (NOTIFY_OK);
|
|
|
|
arc_set_limits(allmem);
|
|
|
|
#ifdef __LP64__
|
|
if (zfs_dirty_data_max_max == 0)
|
|
zfs_dirty_data_max_max = MIN(4ULL * 1024 * 1024 * 1024,
|
|
allmem * zfs_dirty_data_max_max_percent / 100);
|
|
#else
|
|
if (zfs_dirty_data_max_max == 0)
|
|
zfs_dirty_data_max_max = MIN(1ULL * 1024 * 1024 * 1024,
|
|
allmem * zfs_dirty_data_max_max_percent / 100);
|
|
#endif
|
|
|
|
arc_set_sys_free(allmem);
|
|
return (NOTIFY_OK);
|
|
}
|
|
#endif
|
|
|
|
void
|
|
arc_register_hotplug(void)
|
|
{
|
|
#ifdef CONFIG_MEMORY_HOTPLUG
|
|
arc_hotplug_callback_mem_nb.notifier_call = arc_hotplug_callback;
|
|
/* There is no significance to the value 100 */
|
|
arc_hotplug_callback_mem_nb.priority = 100;
|
|
register_memory_notifier(&arc_hotplug_callback_mem_nb);
|
|
#endif
|
|
}
|
|
|
|
void
|
|
arc_unregister_hotplug(void)
|
|
{
|
|
#ifdef CONFIG_MEMORY_HOTPLUG
|
|
unregister_memory_notifier(&arc_hotplug_callback_mem_nb);
|
|
#endif
|
|
}
|
|
#else /* _KERNEL */
|
|
int64_t
|
|
arc_available_memory(void)
|
|
{
|
|
int64_t lowest = INT64_MAX;
|
|
|
|
/* Every 100 calls, free a small amount */
|
|
if (random_in_range(100) == 0)
|
|
lowest = -1024;
|
|
|
|
return (lowest);
|
|
}
|
|
|
|
int
|
|
arc_memory_throttle(spa_t *spa, uint64_t reserve, uint64_t txg)
|
|
{
|
|
(void) spa, (void) reserve, (void) txg;
|
|
return (0);
|
|
}
|
|
|
|
uint64_t
|
|
arc_all_memory(void)
|
|
{
|
|
return (ptob(physmem) / 2);
|
|
}
|
|
|
|
uint64_t
|
|
arc_free_memory(void)
|
|
{
|
|
return (random_in_range(arc_all_memory() * 20 / 100));
|
|
}
|
|
|
|
void
|
|
arc_register_hotplug(void)
|
|
{
|
|
}
|
|
|
|
void
|
|
arc_unregister_hotplug(void)
|
|
{
|
|
}
|
|
#endif /* _KERNEL */
|
|
|
|
/*
|
|
* Helper function for arc_prune_async() it is responsible for safely
|
|
* handling the execution of a registered arc_prune_func_t.
|
|
*/
|
|
static void
|
|
arc_prune_task(void *ptr)
|
|
{
|
|
arc_prune_t *ap = (arc_prune_t *)ptr;
|
|
arc_prune_func_t *func = ap->p_pfunc;
|
|
|
|
if (func != NULL)
|
|
func(ap->p_adjust, ap->p_private);
|
|
|
|
zfs_refcount_remove(&ap->p_refcnt, func);
|
|
}
|
|
|
|
/*
|
|
* Notify registered consumers they must drop holds on a portion of the ARC
|
|
* buffered they reference. This provides a mechanism to ensure the ARC can
|
|
* honor the arc_meta_limit and reclaim otherwise pinned ARC buffers. This
|
|
* is analogous to dnlc_reduce_cache() but more generic.
|
|
*
|
|
* This operation is performed asynchronously so it may be safely called
|
|
* in the context of the arc_reclaim_thread(). A reference is taken here
|
|
* for each registered arc_prune_t and the arc_prune_task() is responsible
|
|
* for releasing it once the registered arc_prune_func_t has completed.
|
|
*/
|
|
void
|
|
arc_prune_async(uint64_t adjust)
|
|
{
|
|
arc_prune_t *ap;
|
|
|
|
mutex_enter(&arc_prune_mtx);
|
|
for (ap = list_head(&arc_prune_list); ap != NULL;
|
|
ap = list_next(&arc_prune_list, ap)) {
|
|
|
|
if (zfs_refcount_count(&ap->p_refcnt) >= 2)
|
|
continue;
|
|
|
|
zfs_refcount_add(&ap->p_refcnt, ap->p_pfunc);
|
|
ap->p_adjust = adjust;
|
|
if (taskq_dispatch(arc_prune_taskq, arc_prune_task,
|
|
ap, TQ_SLEEP) == TASKQID_INVALID) {
|
|
zfs_refcount_remove(&ap->p_refcnt, ap->p_pfunc);
|
|
continue;
|
|
}
|
|
ARCSTAT_BUMP(arcstat_prune);
|
|
}
|
|
mutex_exit(&arc_prune_mtx);
|
|
}
|
|
|
|
ZFS_MODULE_PARAM(zfs_arc, zfs_arc_, shrinker_limit, INT, ZMOD_RW,
|
|
"Limit on number of pages that ARC shrinker can reclaim at once");
|