c/mirror_zfs
1
0
Fork 0
mirror of https://git.proxmox.com/git/mirror_zfs.git synced 2024-12-27 11:29:36 +03:00
Code Issues Packages Projects Releases Wiki Activity
039bae18ca
mirror_zfs/module/splat/splat-thread.c
Brian Behlendorf b7dc313837 Add Thread Specific Data (TSD) Regression Test 
To validate the correct behavior of the TSD interfaces it's
important that we add a regression test.  This test is designed
to minimally exercise the fundamental TSD behavior, it does not
attempt to validate all potential corner cases.

The test will first create 32 keys via tsd_create() and register
a common destructor.  Next 16 wait threads will be created each
of which set/verify a random value for all 32 keys, then block
waiting to be released by the control thread.  Meanwhile the
control thread verifies that none of the destructors have been
run prematurely.

The next phase of the test is to create 16 exit threads which
set/verify a random value for all 32 keys.  They then immediately
exit.  This is is designed to verify tsd_exit() which will be
called via thread_exit().  This must result in all registered
destructors being run and the memory for the tsd being free'd.

After this tsd_destroy() is verified by destroying all 32 keys.
Once again we must see the expected number of destructors run
and the tsd memory free'd.  At this point the blocked threads
are released and they exit calling tsd_exit() which should do
very little since all the tsd has already been destroyed.

If this all goes off without a hitch the test passes.  To ensure
no memory has been leaked, I have manually verified that after
spl module unload no memory is reported leaked.
2010-12-07 10:02:44 -08:00

385 lines
11 KiB
C
Raw Blame History

/*****************************************************************************\
* Copyright (C) 2007-2010 Lawrence Livermore National Security, LLC.
* Copyright (C) 2007 The Regents of the University of California.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Written by Brian Behlendorf <behlendorf1@llnl.gov>.
* UCRL-CODE-235197
*
* This file is part of the SPL, Solaris Porting Layer.
* For details, see <http://github.com/behlendorf/spl/>.
*
* The SPL is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* The SPL is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with the SPL. If not, see <http://www.gnu.org/licenses/>.
*****************************************************************************
* Solaris Porting LAyer Tests (SPLAT) Thread Tests.
\*****************************************************************************/
#include "splat-internal.h"
#define SPLAT_THREAD_NAME "thread"
#define SPLAT_THREAD_DESC "Kernel Thread Tests"
#define SPLAT_THREAD_TEST1_ID 0x0601
#define SPLAT_THREAD_TEST1_NAME "create"
#define SPLAT_THREAD_TEST1_DESC "Validate thread creation"
#define SPLAT_THREAD_TEST2_ID 0x0602
#define SPLAT_THREAD_TEST2_NAME "exit"
#define SPLAT_THREAD_TEST2_DESC "Validate thread exit"
#define SPLAT_THREAD_TEST3_ID 0x6003
#define SPLAT_THREAD_TEST3_NAME "tsd"
#define SPLAT_THREAD_TEST3_DESC "Validate thread specific data"
#define SPLAT_THREAD_TEST_MAGIC 0x4488CC00UL
#define SPLAT_THREAD_TEST_KEYS 32
#define SPLAT_THREAD_TEST_THREADS 16
typedef struct thread_priv {
unsigned long tp_magic;
struct file *tp_file;
spinlock_t tp_lock;
wait_queue_head_t tp_waitq;
uint_t tp_keys[SPLAT_THREAD_TEST_KEYS];
int tp_rc;
int tp_count;
int tp_dtor_count;
} thread_priv_t;
static int
splat_thread_rc(thread_priv_t *tp, int rc)
{
int ret;
spin_lock(&tp->tp_lock);
ret = (tp->tp_rc == rc);
spin_unlock(&tp->tp_lock);
return ret;
}
static int
splat_thread_count(thread_priv_t *tp, int count)
{
int ret;
spin_lock(&tp->tp_lock);
ret = (tp->tp_count == count);
spin_unlock(&tp->tp_lock);
return ret;
}
static void
splat_thread_work1(void *priv)
{
thread_priv_t *tp = (thread_priv_t *)priv;
spin_lock(&tp->tp_lock);
ASSERT(tp->tp_magic == SPLAT_THREAD_TEST_MAGIC);
tp->tp_rc = 1;
wake_up(&tp->tp_waitq);
spin_unlock(&tp->tp_lock);
thread_exit();
}
static int
splat_thread_test1(struct file *file, void *arg)
{
thread_priv_t tp;
kthread_t *thr;
tp.tp_magic = SPLAT_THREAD_TEST_MAGIC;
tp.tp_file = file;
spin_lock_init(&tp.tp_lock);
init_waitqueue_head(&tp.tp_waitq);
tp.tp_rc = 0;
thr = (kthread_t *)thread_create(NULL, 0, splat_thread_work1, &tp, 0,
&p0, TS_RUN, minclsyspri);
/* Must never fail under Solaris, but we check anyway since this
* can happen in the linux SPL, we may want to change this behavior */
if (thr == NULL)
return -ESRCH;
/* Sleep until the thread sets tp.tp_rc == 1 */
wait_event(tp.tp_waitq, splat_thread_rc(&tp, 1));
splat_vprint(file, SPLAT_THREAD_TEST1_NAME, "%s",
"Thread successfully started properly\n");
return 0;
}
static void
splat_thread_work2(void *priv)
{
thread_priv_t *tp = (thread_priv_t *)priv;
spin_lock(&tp->tp_lock);
ASSERT(tp->tp_magic == SPLAT_THREAD_TEST_MAGIC);
tp->tp_rc = 1;
wake_up(&tp->tp_waitq);
spin_unlock(&tp->tp_lock);
thread_exit();
/* The following code is unreachable when thread_exit() is
* working properly, which is exactly what we're testing */
spin_lock(&tp->tp_lock);
tp->tp_rc = 2;
wake_up(&tp->tp_waitq);
spin_unlock(&tp->tp_lock);
}
static int
splat_thread_test2(struct file *file, void *arg)
{
thread_priv_t tp;
kthread_t *thr;
int rc = 0;
tp.tp_magic = SPLAT_THREAD_TEST_MAGIC;
tp.tp_file = file;
spin_lock_init(&tp.tp_lock);
init_waitqueue_head(&tp.tp_waitq);
tp.tp_rc = 0;
thr = (kthread_t *)thread_create(NULL, 0, splat_thread_work2, &tp, 0,
&p0, TS_RUN, minclsyspri);
/* Must never fail under Solaris, but we check anyway since this
* can happen in the linux SPL, we may want to change this behavior */
if (thr == NULL)
return -ESRCH;
/* Sleep until the thread sets tp.tp_rc == 1 */
wait_event(tp.tp_waitq, splat_thread_rc(&tp, 1));
/* Sleep until the thread sets tp.tp_rc == 2, or until we hit
* the timeout. If thread exit is working properly we should
* hit the timeout and never see to.tp_rc == 2. */
rc = wait_event_timeout(tp.tp_waitq, splat_thread_rc(&tp, 2), HZ / 10);
if (rc > 0) {
rc = -EINVAL;
splat_vprint(file, SPLAT_THREAD_TEST2_NAME, "%s",
"Thread did not exit properly at thread_exit()\n");
} else {
splat_vprint(file, SPLAT_THREAD_TEST2_NAME, "%s",
"Thread successfully exited at thread_exit()\n");
}
return rc;
}
static void
splat_thread_work3_common(thread_priv_t *tp)
{
ulong_t rnd;
int i, rc = 0;
/* set a unique value for each key using a random value */
get_random_bytes((void *)&rnd, 4);
for (i = 0; i < SPLAT_THREAD_TEST_KEYS; i++)
tsd_set(tp->tp_keys[i], (void *)(i + rnd));
/* verify the unique value for each key */
for (i = 0; i < SPLAT_THREAD_TEST_KEYS; i++)
if (tsd_get(tp->tp_keys[i]) != (void *)(i + rnd))
rc = -EINVAL;
/* set the value to thread_priv_t for use by the destructor */
for (i = 0; i < SPLAT_THREAD_TEST_KEYS; i++)
tsd_set(tp->tp_keys[i], (void *)tp);
spin_lock(&tp->tp_lock);
if (rc && !tp->tp_rc)
tp->tp_rc = rc;
tp->tp_count++;
wake_up_all(&tp->tp_waitq);
spin_unlock(&tp->tp_lock);
}
static void
splat_thread_work3_wait(void *priv)
{
thread_priv_t *tp = (thread_priv_t *)priv;
ASSERT(tp->tp_magic == SPLAT_THREAD_TEST_MAGIC);
splat_thread_work3_common(tp);
wait_event(tp->tp_waitq, splat_thread_count(tp, 0));
thread_exit();
}
static void
splat_thread_work3_exit(void *priv)
{
thread_priv_t *tp = (thread_priv_t *)priv;
ASSERT(tp->tp_magic == SPLAT_THREAD_TEST_MAGIC);
splat_thread_work3_common(tp);
thread_exit();
}
static void
splat_thread_dtor3(void *priv)
{
thread_priv_t *tp = (thread_priv_t *)priv;
ASSERT(tp->tp_magic == SPLAT_THREAD_TEST_MAGIC);
spin_lock(&tp->tp_lock);
tp->tp_dtor_count++;
spin_unlock(&tp->tp_lock);
}
/*
* Create threads which set and verify SPLAT_THREAD_TEST_KEYS number of
* keys. These threads may then exit by calling thread_exit() which calls
* tsd_exit() resulting in all their thread specific data being reclaimed.
* Alternately, the thread may block in which case the thread specific
* data will be reclaimed as part of tsd_destroy(). In either case all
* thread specific data must be reclaimed, this is verified by ensuring
* the registered destructor is called the correct number of times.
*/
static int
splat_thread_test3(struct file *file, void *arg)
{
int i, rc = 0, expected, wait_count = 0, exit_count = 0;
thread_priv_t tp;
tp.tp_magic = SPLAT_THREAD_TEST_MAGIC;
tp.tp_file = file;
spin_lock_init(&tp.tp_lock);
init_waitqueue_head(&tp.tp_waitq);
tp.tp_rc = 0;
tp.tp_count = 0;
tp.tp_dtor_count = 0;
for (i = 0; i < SPLAT_THREAD_TEST_KEYS; i++) {
tp.tp_keys[i] = 0;
tsd_create(&tp.tp_keys[i], splat_thread_dtor3);
}
/* Start tsd wait threads */
for (i = 0; i < SPLAT_THREAD_TEST_THREADS; i++) {
if (thread_create(NULL, 0, splat_thread_work3_wait,
&tp, 0, &p0, TS_RUN, minclsyspri))
wait_count++;
}
/* All wait threads have setup their tsd and are blocking. */
wait_event(tp.tp_waitq, splat_thread_count(&tp, wait_count));
if (tp.tp_dtor_count != 0) {
splat_vprint(file, SPLAT_THREAD_TEST3_NAME,
"Prematurely ran %d tsd destructors\n", tp.tp_dtor_count);
if (!rc)
rc = -ERANGE;
}
/* Start tsd exit threads */
for (i = 0; i < SPLAT_THREAD_TEST_THREADS; i++) {
if (thread_create(NULL, 0, splat_thread_work3_exit,
&tp, 0, &p0, TS_RUN, minclsyspri))
exit_count++;
}
/* All exit threads verified tsd and are in the process of exiting */
wait_event(tp.tp_waitq,splat_thread_count(&tp, wait_count+exit_count));
msleep(500);
expected = (SPLAT_THREAD_TEST_KEYS * exit_count);
if (tp.tp_dtor_count != expected) {
splat_vprint(file, SPLAT_THREAD_TEST3_NAME,
"Expected %d exit tsd destructors but saw %d\n",
expected, tp.tp_dtor_count);
if (!rc)
rc = -ERANGE;
}
/* Destroy all keys and associated tsd in blocked threads */
for (i = 0; i < SPLAT_THREAD_TEST_KEYS; i++)
tsd_destroy(&tp.tp_keys[i]);
expected = (SPLAT_THREAD_TEST_KEYS * (exit_count + wait_count));
if (tp.tp_dtor_count != expected) {
splat_vprint(file, SPLAT_THREAD_TEST3_NAME,
"Expected %d wait+exit tsd destructors but saw %d\n",
expected, tp.tp_dtor_count);
if (!rc)
rc = -ERANGE;
}
/* Release the remaining wait threads, sleep briefly while they exit */
spin_lock(&tp.tp_lock);
tp.tp_count = 0;
wake_up_all(&tp.tp_waitq);
spin_unlock(&tp.tp_lock);
msleep(500);
if (tp.tp_rc) {
splat_vprint(file, SPLAT_THREAD_TEST3_NAME,
"Thread tsd_get()/tsd_set() error %d\n", tp.tp_rc);
if (!rc)
rc = tp.tp_rc;
} else if (!rc) {
splat_vprint(file, SPLAT_THREAD_TEST3_NAME, "%s",
"Thread specific data verified\n");
}
return rc;
}
splat_subsystem_t *
splat_thread_init(void)
{
splat_subsystem_t *sub;
sub = kmalloc(sizeof(*sub), GFP_KERNEL);
if (sub == NULL)
return NULL;
memset(sub, 0, sizeof(*sub));
strncpy(sub->desc.name, SPLAT_THREAD_NAME, SPLAT_NAME_SIZE);
strncpy(sub->desc.desc, SPLAT_THREAD_DESC, SPLAT_DESC_SIZE);
INIT_LIST_HEAD(&sub->subsystem_list);
INIT_LIST_HEAD(&sub->test_list);
spin_lock_init(&sub->test_lock);
sub->desc.id = SPLAT_SUBSYSTEM_THREAD;
SPLAT_TEST_INIT(sub, SPLAT_THREAD_TEST1_NAME, SPLAT_THREAD_TEST1_DESC,
SPLAT_THREAD_TEST1_ID, splat_thread_test1);
SPLAT_TEST_INIT(sub, SPLAT_THREAD_TEST2_NAME, SPLAT_THREAD_TEST2_DESC,
SPLAT_THREAD_TEST2_ID, splat_thread_test2);
SPLAT_TEST_INIT(sub, SPLAT_THREAD_TEST3_NAME, SPLAT_THREAD_TEST3_DESC,
SPLAT_THREAD_TEST3_ID, splat_thread_test3);
return sub;
}
void
splat_thread_fini(splat_subsystem_t *sub)
{
ASSERT(sub);
SPLAT_TEST_FINI(sub, SPLAT_THREAD_TEST3_ID);
SPLAT_TEST_FINI(sub, SPLAT_THREAD_TEST2_ID);
SPLAT_TEST_FINI(sub, SPLAT_THREAD_TEST1_ID);
kfree(sub);
}
int
splat_thread_id(void) {
return SPLAT_SUBSYSTEM_THREAD;
}
Reference in New Issue View Git Blame Copy Permalink