/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2013 by Delphix. All rights reserved. * Copyright 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2012, Joyent, Inc. All rights reserved. */ /* Portions Copyright 2010 Robert Milkowski */ #ifndef _SYS_FS_ZFS_H #define _SYS_FS_ZFS_H #include #ifdef __cplusplus extern "C" { #endif /* * Types and constants shared between userland and the kernel. */ /* * Each dataset can be one of the following types. These constants can be * combined into masks that can be passed to various functions. */ typedef enum { ZFS_TYPE_FILESYSTEM = 0x1, ZFS_TYPE_SNAPSHOT = 0x2, ZFS_TYPE_VOLUME = 0x4, ZFS_TYPE_POOL = 0x8 } zfs_type_t; typedef enum dmu_objset_type { DMU_OST_NONE, DMU_OST_META, DMU_OST_ZFS, DMU_OST_ZVOL, DMU_OST_OTHER, /* For testing only! */ DMU_OST_ANY, /* Be careful! */ DMU_OST_NUMTYPES } dmu_objset_type_t; #define ZFS_TYPE_DATASET \ (ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME | ZFS_TYPE_SNAPSHOT) #define ZAP_MAXNAMELEN 256 #define ZAP_MAXVALUELEN (1024 * 8) #define ZAP_OLDMAXVALUELEN 1024 /* * Dataset properties are identified by these constants and must be added to * the end of this list to ensure that external consumers are not affected * by the change. If you make any changes to this list, be sure to update * the property table in module/zcommon/zfs_prop.c. */ typedef enum { ZFS_PROP_TYPE, ZFS_PROP_CREATION, ZFS_PROP_USED, ZFS_PROP_AVAILABLE, ZFS_PROP_REFERENCED, ZFS_PROP_COMPRESSRATIO, ZFS_PROP_MOUNTED, ZFS_PROP_ORIGIN, ZFS_PROP_QUOTA, ZFS_PROP_RESERVATION, ZFS_PROP_VOLSIZE, ZFS_PROP_VOLBLOCKSIZE, ZFS_PROP_RECORDSIZE, ZFS_PROP_MOUNTPOINT, ZFS_PROP_SHARENFS, ZFS_PROP_CHECKSUM, ZFS_PROP_COMPRESSION, ZFS_PROP_ATIME, ZFS_PROP_DEVICES, ZFS_PROP_EXEC, ZFS_PROP_SETUID, ZFS_PROP_READONLY, ZFS_PROP_ZONED, ZFS_PROP_SNAPDIR, ZFS_PROP_PRIVATE, /* not exposed to user, temporary */ ZFS_PROP_ACLINHERIT, ZFS_PROP_CREATETXG, /* not exposed to the user */ ZFS_PROP_NAME, /* not exposed to the user */ ZFS_PROP_CANMOUNT, ZFS_PROP_ISCSIOPTIONS, /* not exposed to the user */ ZFS_PROP_XATTR, ZFS_PROP_NUMCLONES, /* not exposed to the user */ ZFS_PROP_COPIES, ZFS_PROP_VERSION, ZFS_PROP_UTF8ONLY, ZFS_PROP_NORMALIZE, ZFS_PROP_CASE, ZFS_PROP_VSCAN, ZFS_PROP_NBMAND, ZFS_PROP_SHARESMB, ZFS_PROP_REFQUOTA, ZFS_PROP_REFRESERVATION, ZFS_PROP_GUID, ZFS_PROP_PRIMARYCACHE, ZFS_PROP_SECONDARYCACHE, ZFS_PROP_USEDSNAP, ZFS_PROP_USEDDS, ZFS_PROP_USEDCHILD, ZFS_PROP_USEDREFRESERV, ZFS_PROP_USERACCOUNTING, /* not exposed to the user */ ZFS_PROP_STMF_SHAREINFO, /* not exposed to the user */ ZFS_PROP_DEFER_DESTROY, ZFS_PROP_USERREFS, ZFS_PROP_LOGBIAS, ZFS_PROP_UNIQUE, /* not exposed to the user */ ZFS_PROP_OBJSETID, /* not exposed to the user */ ZFS_PROP_DEDUP, ZFS_PROP_MLSLABEL, ZFS_PROP_SYNC, ZFS_PROP_REFRATIO, ZFS_PROP_WRITTEN, ZFS_PROP_CLONES, ZFS_PROP_LOGICALUSED, ZFS_PROP_LOGICALREFERENCED, ZFS_PROP_INCONSISTENT, /* not exposed to the user */ ZFS_PROP_SNAPDEV, ZFS_PROP_ACLTYPE, ZFS_PROP_SELINUX_CONTEXT, ZFS_PROP_SELINUX_FSCONTEXT, ZFS_PROP_SELINUX_DEFCONTEXT, ZFS_PROP_SELINUX_ROOTCONTEXT, ZFS_PROP_RELATIME, ZFS_NUM_PROPS } zfs_prop_t; typedef enum { ZFS_PROP_USERUSED, ZFS_PROP_USERQUOTA, ZFS_PROP_GROUPUSED, ZFS_PROP_GROUPQUOTA, ZFS_NUM_USERQUOTA_PROPS } zfs_userquota_prop_t; extern const char *zfs_userquota_prop_prefixes[ZFS_NUM_USERQUOTA_PROPS]; /* * Pool properties are identified by these constants and must be added to the * end of this list to ensure that external consumers are not affected * by the change. If you make any changes to this list, be sure to update * the property table in module/zcommon/zpool_prop.c. */ typedef enum { ZPOOL_PROP_NAME, ZPOOL_PROP_SIZE, ZPOOL_PROP_CAPACITY, ZPOOL_PROP_ALTROOT, ZPOOL_PROP_HEALTH, ZPOOL_PROP_GUID, ZPOOL_PROP_VERSION, ZPOOL_PROP_BOOTFS, ZPOOL_PROP_DELEGATION, ZPOOL_PROP_AUTOREPLACE, ZPOOL_PROP_CACHEFILE, ZPOOL_PROP_FAILUREMODE, ZPOOL_PROP_LISTSNAPS, ZPOOL_PROP_AUTOEXPAND, ZPOOL_PROP_DEDUPDITTO, ZPOOL_PROP_DEDUPRATIO, ZPOOL_PROP_FREE, ZPOOL_PROP_ALLOCATED, ZPOOL_PROP_READONLY, ZPOOL_PROP_ASHIFT, ZPOOL_PROP_COMMENT, ZPOOL_PROP_EXPANDSZ, ZPOOL_PROP_FREEING, ZPOOL_NUM_PROPS } zpool_prop_t; /* Small enough to not hog a whole line of printout in zpool(1M). */ #define ZPROP_MAX_COMMENT 32 #define ZPROP_CONT -2 #define ZPROP_INVAL -1 #define ZPROP_VALUE "value" #define ZPROP_SOURCE "source" typedef enum { ZPROP_SRC_NONE = 0x1, ZPROP_SRC_DEFAULT = 0x2, ZPROP_SRC_TEMPORARY = 0x4, ZPROP_SRC_LOCAL = 0x8, ZPROP_SRC_INHERITED = 0x10, ZPROP_SRC_RECEIVED = 0x20 } zprop_source_t; #define ZPROP_SRC_ALL 0x3f #define ZPROP_SOURCE_VAL_RECVD "$recvd" #define ZPROP_N_MORE_ERRORS "N_MORE_ERRORS" /* * Dataset flag implemented as a special entry in the props zap object * indicating that the dataset has received properties on or after * SPA_VERSION_RECVD_PROPS. The first such receive blows away local properties * just as it did in earlier versions, and thereafter, local properties are * preserved. */ #define ZPROP_HAS_RECVD "$hasrecvd" typedef enum { ZPROP_ERR_NOCLEAR = 0x1, /* failure to clear existing props */ ZPROP_ERR_NORESTORE = 0x2 /* failure to restore props on error */ } zprop_errflags_t; typedef int (*zprop_func)(int, void *); /* * Properties to be set on the root file system of a new pool * are stuffed into their own nvlist, which is then included in * the properties nvlist with the pool properties. */ #define ZPOOL_ROOTFS_PROPS "root-props-nvl" /* * Dataset property functions shared between libzfs and kernel. */ const char *zfs_prop_default_string(zfs_prop_t); uint64_t zfs_prop_default_numeric(zfs_prop_t); boolean_t zfs_prop_readonly(zfs_prop_t); boolean_t zfs_prop_inheritable(zfs_prop_t); boolean_t zfs_prop_setonce(zfs_prop_t); const char *zfs_prop_to_name(zfs_prop_t); zfs_prop_t zfs_name_to_prop(const char *); boolean_t zfs_prop_user(const char *); boolean_t zfs_prop_userquota(const char *); boolean_t zfs_prop_written(const char *); int zfs_prop_index_to_string(zfs_prop_t, uint64_t, const char **); int zfs_prop_string_to_index(zfs_prop_t, const char *, uint64_t *); uint64_t zfs_prop_random_value(zfs_prop_t, uint64_t seed); boolean_t zfs_prop_valid_for_type(int, zfs_type_t); /* * Pool property functions shared between libzfs and kernel. */ zpool_prop_t zpool_name_to_prop(const char *); const char *zpool_prop_to_name(zpool_prop_t); const char *zpool_prop_default_string(zpool_prop_t); uint64_t zpool_prop_default_numeric(zpool_prop_t); boolean_t zpool_prop_readonly(zpool_prop_t); boolean_t zpool_prop_feature(const char *); boolean_t zpool_prop_unsupported(const char *); int zpool_prop_index_to_string(zpool_prop_t, uint64_t, const char **); int zpool_prop_string_to_index(zpool_prop_t, const char *, uint64_t *); uint64_t zpool_prop_random_value(zpool_prop_t, uint64_t seed); /* * Definitions for the Delegation. */ typedef enum { ZFS_DELEG_WHO_UNKNOWN = 0, ZFS_DELEG_USER = 'u', ZFS_DELEG_USER_SETS = 'U', ZFS_DELEG_GROUP = 'g', ZFS_DELEG_GROUP_SETS = 'G', ZFS_DELEG_EVERYONE = 'e', ZFS_DELEG_EVERYONE_SETS = 'E', ZFS_DELEG_CREATE = 'c', ZFS_DELEG_CREATE_SETS = 'C', ZFS_DELEG_NAMED_SET = 's', ZFS_DELEG_NAMED_SET_SETS = 'S' } zfs_deleg_who_type_t; typedef enum { ZFS_DELEG_NONE = 0, ZFS_DELEG_PERM_LOCAL = 1, ZFS_DELEG_PERM_DESCENDENT = 2, ZFS_DELEG_PERM_LOCALDESCENDENT = 3, ZFS_DELEG_PERM_CREATE = 4 } zfs_deleg_inherit_t; #define ZFS_DELEG_PERM_UID "uid" #define ZFS_DELEG_PERM_GID "gid" #define ZFS_DELEG_PERM_GROUPS "groups" #define ZFS_MLSLABEL_DEFAULT "none" #define ZFS_SMB_ACL_SRC "src" #define ZFS_SMB_ACL_TARGET "target" typedef enum { ZFS_CANMOUNT_OFF = 0, ZFS_CANMOUNT_ON = 1, ZFS_CANMOUNT_NOAUTO = 2 } zfs_canmount_type_t; typedef enum { ZFS_LOGBIAS_LATENCY = 0, ZFS_LOGBIAS_THROUGHPUT = 1 } zfs_logbias_op_t; typedef enum zfs_share_op { ZFS_SHARE_NFS = 0, ZFS_UNSHARE_NFS = 1, ZFS_SHARE_SMB = 2, ZFS_UNSHARE_SMB = 3 } zfs_share_op_t; typedef enum zfs_smb_acl_op { ZFS_SMB_ACL_ADD, ZFS_SMB_ACL_REMOVE, ZFS_SMB_ACL_RENAME, ZFS_SMB_ACL_PURGE } zfs_smb_acl_op_t; typedef enum zfs_cache_type { ZFS_CACHE_NONE = 0, ZFS_CACHE_METADATA = 1, ZFS_CACHE_ALL = 2 } zfs_cache_type_t; typedef enum { ZFS_SYNC_STANDARD = 0, ZFS_SYNC_ALWAYS = 1, ZFS_SYNC_DISABLED = 2 } zfs_sync_type_t; typedef enum { ZFS_XATTR_OFF = 0, ZFS_XATTR_DIR = 1, ZFS_XATTR_SA = 2 } zfs_xattr_type_t; /* * On-disk version number. */ #define SPA_VERSION_1 1ULL #define SPA_VERSION_2 2ULL #define SPA_VERSION_3 3ULL #define SPA_VERSION_4 4ULL #define SPA_VERSION_5 5ULL #define SPA_VERSION_6 6ULL #define SPA_VERSION_7 7ULL #define SPA_VERSION_8 8ULL #define SPA_VERSION_9 9ULL #define SPA_VERSION_10 10ULL #define SPA_VERSION_11 11ULL #define SPA_VERSION_12 12ULL #define SPA_VERSION_13 13ULL #define SPA_VERSION_14 14ULL #define SPA_VERSION_15 15ULL #define SPA_VERSION_16 16ULL #define SPA_VERSION_17 17ULL #define SPA_VERSION_18 18ULL #define SPA_VERSION_19 19ULL #define SPA_VERSION_20 20ULL #define SPA_VERSION_21 21ULL #define SPA_VERSION_22 22ULL #define SPA_VERSION_23 23ULL #define SPA_VERSION_24 24ULL #define SPA_VERSION_25 25ULL #define SPA_VERSION_26 26ULL #define SPA_VERSION_27 27ULL #define SPA_VERSION_28 28ULL #define SPA_VERSION_5000 5000ULL /* * When bumping up SPA_VERSION, make sure GRUB ZFS understands the on-disk * format change. Go to usr/src/grub/grub-0.97/stage2/{zfs-include/, fsys_zfs*}, * and do the appropriate changes. Also bump the version number in * usr/src/grub/capability. */ #define SPA_VERSION SPA_VERSION_5000 #define SPA_VERSION_STRING "5000" /* * Symbolic names for the changes that caused a SPA_VERSION switch. * Used in the code when checking for presence or absence of a feature. * Feel free to define multiple symbolic names for each version if there * were multiple changes to on-disk structures during that version. * * NOTE: When checking the current SPA_VERSION in your code, be sure * to use spa_version() since it reports the version of the * last synced uberblock. Checking the in-flight version can * be dangerous in some cases. */ #define SPA_VERSION_INITIAL SPA_VERSION_1 #define SPA_VERSION_DITTO_BLOCKS SPA_VERSION_2 #define SPA_VERSION_SPARES SPA_VERSION_3 #define SPA_VERSION_RAIDZ2 SPA_VERSION_3 #define SPA_VERSION_BPOBJ_ACCOUNT SPA_VERSION_3 #define SPA_VERSION_RAIDZ_DEFLATE SPA_VERSION_3 #define SPA_VERSION_DNODE_BYTES SPA_VERSION_3 #define SPA_VERSION_ZPOOL_HISTORY SPA_VERSION_4 #define SPA_VERSION_GZIP_COMPRESSION SPA_VERSION_5 #define SPA_VERSION_BOOTFS SPA_VERSION_6 #define SPA_VERSION_SLOGS SPA_VERSION_7 #define SPA_VERSION_DELEGATED_PERMS SPA_VERSION_8 #define SPA_VERSION_FUID SPA_VERSION_9 #define SPA_VERSION_REFRESERVATION SPA_VERSION_9 #define SPA_VERSION_REFQUOTA SPA_VERSION_9 #define SPA_VERSION_UNIQUE_ACCURATE SPA_VERSION_9 #define SPA_VERSION_L2CACHE SPA_VERSION_10 #define SPA_VERSION_NEXT_CLONES SPA_VERSION_11 #define SPA_VERSION_ORIGIN SPA_VERSION_11 #define SPA_VERSION_DSL_SCRUB SPA_VERSION_11 #define SPA_VERSION_SNAP_PROPS SPA_VERSION_12 #define SPA_VERSION_USED_BREAKDOWN SPA_VERSION_13 #define SPA_VERSION_PASSTHROUGH_X SPA_VERSION_14 #define SPA_VERSION_USERSPACE SPA_VERSION_15 #define SPA_VERSION_STMF_PROP SPA_VERSION_16 #define SPA_VERSION_RAIDZ3 SPA_VERSION_17 #define SPA_VERSION_USERREFS SPA_VERSION_18 #define SPA_VERSION_HOLES SPA_VERSION_19 #define SPA_VERSION_ZLE_COMPRESSION SPA_VERSION_20 #define SPA_VERSION_DEDUP SPA_VERSION_21 #define SPA_VERSION_RECVD_PROPS SPA_VERSION_22 #define SPA_VERSION_SLIM_ZIL SPA_VERSION_23 #define SPA_VERSION_SA SPA_VERSION_24 #define SPA_VERSION_SCAN SPA_VERSION_25 #define SPA_VERSION_DIR_CLONES SPA_VERSION_26 #define SPA_VERSION_DEADLISTS SPA_VERSION_26 #define SPA_VERSION_FAST_SNAP SPA_VERSION_27 #define SPA_VERSION_MULTI_REPLACE SPA_VERSION_28 #define SPA_VERSION_BEFORE_FEATURES SPA_VERSION_28 #define SPA_VERSION_FEATURES SPA_VERSION_5000 #define SPA_VERSION_IS_SUPPORTED(v) \ (((v) >= SPA_VERSION_INITIAL && (v) <= SPA_VERSION_BEFORE_FEATURES) || \ ((v) >= SPA_VERSION_FEATURES && (v) <= SPA_VERSION)) /* * ZPL version - rev'd whenever an incompatible on-disk format change * occurs. This is independent of SPA/DMU/ZAP versioning. You must * also update the version_table[] and help message in zfs_prop.c. * * When changing, be sure to teach GRUB how to read the new format! * See usr/src/grub/grub-0.97/stage2/{zfs-include/,fsys_zfs*} */ #define ZPL_VERSION_1 1ULL #define ZPL_VERSION_2 2ULL #define ZPL_VERSION_3 3ULL #define ZPL_VERSION_4 4ULL #define ZPL_VERSION_5 5ULL #define ZPL_VERSION ZPL_VERSION_5 #define ZPL_VERSION_STRING "5" #define ZPL_VERSION_INITIAL ZPL_VERSION_1 #define ZPL_VERSION_DIRENT_TYPE ZPL_VERSION_2 #define ZPL_VERSION_FUID ZPL_VERSION_3 #define ZPL_VERSION_NORMALIZATION ZPL_VERSION_3 #define ZPL_VERSION_SYSATTR ZPL_VERSION_3 #define ZPL_VERSION_USERSPACE ZPL_VERSION_4 #define ZPL_VERSION_SA ZPL_VERSION_5 /* Rewind request information */ #define ZPOOL_NO_REWIND 1 /* No policy - default behavior */ #define ZPOOL_NEVER_REWIND 2 /* Do not search for best txg or rewind */ #define ZPOOL_TRY_REWIND 4 /* Search for best txg, but do not rewind */ #define ZPOOL_DO_REWIND 8 /* Rewind to best txg w/in deferred frees */ #define ZPOOL_EXTREME_REWIND 16 /* Allow extreme measures to find best txg */ #define ZPOOL_REWIND_MASK 28 /* All the possible rewind bits */ #define ZPOOL_REWIND_POLICIES 31 /* All the possible policy bits */ typedef struct zpool_rewind_policy { uint32_t zrp_request; /* rewind behavior requested */ uint64_t zrp_maxmeta; /* max acceptable meta-data errors */ uint64_t zrp_maxdata; /* max acceptable data errors */ uint64_t zrp_txg; /* specific txg to load */ } zpool_rewind_policy_t; /* * The following are configuration names used in the nvlist describing a pool's * configuration. */ #define ZPOOL_CONFIG_VERSION "version" #define ZPOOL_CONFIG_POOL_NAME "name" #define ZPOOL_CONFIG_POOL_STATE "state" #define ZPOOL_CONFIG_POOL_TXG "txg" #define ZPOOL_CONFIG_POOL_GUID "pool_guid" #define ZPOOL_CONFIG_CREATE_TXG "create_txg" #define ZPOOL_CONFIG_TOP_GUID "top_guid" #define ZPOOL_CONFIG_VDEV_TREE "vdev_tree" #define ZPOOL_CONFIG_TYPE "type" #define ZPOOL_CONFIG_CHILDREN "children" #define ZPOOL_CONFIG_ID "id" #define ZPOOL_CONFIG_GUID "guid" #define ZPOOL_CONFIG_PATH "path" #define ZPOOL_CONFIG_DEVID "devid" #define ZPOOL_CONFIG_METASLAB_ARRAY "metaslab_array" #define ZPOOL_CONFIG_METASLAB_SHIFT "metaslab_shift" #define ZPOOL_CONFIG_ASHIFT "ashift" #define ZPOOL_CONFIG_ASIZE "asize" #define ZPOOL_CONFIG_DTL "DTL" #define ZPOOL_CONFIG_SCAN_STATS "scan_stats" /* not stored on disk */ #define ZPOOL_CONFIG_VDEV_STATS "vdev_stats" /* not stored on disk */ #define ZPOOL_CONFIG_WHOLE_DISK "whole_disk" #define ZPOOL_CONFIG_ERRCOUNT "error_count" #define ZPOOL_CONFIG_NOT_PRESENT "not_present" #define ZPOOL_CONFIG_SPARES "spares" #define ZPOOL_CONFIG_IS_SPARE "is_spare" #define ZPOOL_CONFIG_NPARITY "nparity" #define ZPOOL_CONFIG_HOSTID "hostid" #define ZPOOL_CONFIG_HOSTNAME "hostname" #define ZPOOL_CONFIG_LOADED_TIME "initial_load_time" #define ZPOOL_CONFIG_UNSPARE "unspare" #define ZPOOL_CONFIG_PHYS_PATH "phys_path" #define ZPOOL_CONFIG_IS_LOG "is_log" #define ZPOOL_CONFIG_L2CACHE "l2cache" #define ZPOOL_CONFIG_HOLE_ARRAY "hole_array" #define ZPOOL_CONFIG_VDEV_CHILDREN "vdev_children" #define ZPOOL_CONFIG_IS_HOLE "is_hole" #define ZPOOL_CONFIG_DDT_HISTOGRAM "ddt_histogram" #define ZPOOL_CONFIG_DDT_OBJ_STATS "ddt_object_stats" #define ZPOOL_CONFIG_DDT_STATS "ddt_stats" #define ZPOOL_CONFIG_SPLIT "splitcfg" #define ZPOOL_CONFIG_ORIG_GUID "orig_guid" #define ZPOOL_CONFIG_SPLIT_GUID "split_guid" #define ZPOOL_CONFIG_SPLIT_LIST "guid_list" #define ZPOOL_CONFIG_REMOVING "removing" #define ZPOOL_CONFIG_RESILVER_TXG "resilver_txg" #define ZPOOL_CONFIG_COMMENT "comment" #define ZPOOL_CONFIG_SUSPENDED "suspended" /* not stored on disk */ #define ZPOOL_CONFIG_TIMESTAMP "timestamp" /* not stored on disk */ #define ZPOOL_CONFIG_BOOTFS "bootfs" /* not stored on disk */ #define ZPOOL_CONFIG_MISSING_DEVICES "missing_vdevs" /* not stored on disk */ #define ZPOOL_CONFIG_LOAD_INFO "load_info" /* not stored on disk */ #define ZPOOL_CONFIG_REWIND_INFO "rewind_info" /* not stored on disk */ #define ZPOOL_CONFIG_UNSUP_FEAT "unsup_feat" /* not stored on disk */ #define ZPOOL_CONFIG_ENABLED_FEAT "enabled_feat" /* not stored on disk */ #define ZPOOL_CONFIG_CAN_RDONLY "can_rdonly" /* not stored on disk */ #define ZPOOL_CONFIG_FEATURES_FOR_READ "features_for_read" #define ZPOOL_CONFIG_FEATURE_STATS "feature_stats" /* not stored on disk */ /* * The persistent vdev state is stored as separate values rather than a single * 'vdev_state' entry. This is because a device can be in multiple states, such * as offline and degraded. */ #define ZPOOL_CONFIG_OFFLINE "offline" #define ZPOOL_CONFIG_FAULTED "faulted" #define ZPOOL_CONFIG_DEGRADED "degraded" #define ZPOOL_CONFIG_REMOVED "removed" #define ZPOOL_CONFIG_FRU "fru" #define ZPOOL_CONFIG_AUX_STATE "aux_state" /* Rewind policy parameters */ #define ZPOOL_REWIND_POLICY "rewind-policy" #define ZPOOL_REWIND_REQUEST "rewind-request" #define ZPOOL_REWIND_REQUEST_TXG "rewind-request-txg" #define ZPOOL_REWIND_META_THRESH "rewind-meta-thresh" #define ZPOOL_REWIND_DATA_THRESH "rewind-data-thresh" /* Rewind data discovered */ #define ZPOOL_CONFIG_LOAD_TIME "rewind_txg_ts" #define ZPOOL_CONFIG_LOAD_DATA_ERRORS "verify_data_errors" #define ZPOOL_CONFIG_REWIND_TIME "seconds_of_rewind" #define VDEV_TYPE_ROOT "root" #define VDEV_TYPE_MIRROR "mirror" #define VDEV_TYPE_REPLACING "replacing" #define VDEV_TYPE_RAIDZ "raidz" #define VDEV_TYPE_DISK "disk" #define VDEV_TYPE_FILE "file" #define VDEV_TYPE_MISSING "missing" #define VDEV_TYPE_HOLE "hole" #define VDEV_TYPE_SPARE "spare" #define VDEV_TYPE_LOG "log" #define VDEV_TYPE_L2CACHE "l2cache" /* * This is needed in userland to report the minimum necessary device size. */ #define SPA_MINDEVSIZE (64ULL << 20) /* * The location of the pool configuration repository, shared between kernel and * userland. */ #define ZPOOL_CACHE "/etc/zfs/zpool.cache" /* * vdev states are ordered from least to most healthy. * A vdev that's CANT_OPEN or below is considered unusable. */ typedef enum vdev_state { VDEV_STATE_UNKNOWN = 0, /* Uninitialized vdev */ VDEV_STATE_CLOSED, /* Not currently open */ VDEV_STATE_OFFLINE, /* Not allowed to open */ VDEV_STATE_REMOVED, /* Explicitly removed from system */ VDEV_STATE_CANT_OPEN, /* Tried to open, but failed */ VDEV_STATE_FAULTED, /* External request to fault device */ VDEV_STATE_DEGRADED, /* Replicated vdev with unhealthy kids */ VDEV_STATE_HEALTHY /* Presumed good */ } vdev_state_t; #define VDEV_STATE_ONLINE VDEV_STATE_HEALTHY /* * vdev aux states. When a vdev is in the CANT_OPEN state, the aux field * of the vdev stats structure uses these constants to distinguish why. */ typedef enum vdev_aux { VDEV_AUX_NONE, /* no error */ VDEV_AUX_OPEN_FAILED, /* ldi_open_*() or vn_open() failed */ VDEV_AUX_CORRUPT_DATA, /* bad label or disk contents */ VDEV_AUX_NO_REPLICAS, /* insufficient number of replicas */ VDEV_AUX_BAD_GUID_SUM, /* vdev guid sum doesn't match */ VDEV_AUX_TOO_SMALL, /* vdev size is too small */ VDEV_AUX_BAD_LABEL, /* the label is OK but invalid */ VDEV_AUX_VERSION_NEWER, /* on-disk version is too new */ VDEV_AUX_VERSION_OLDER, /* on-disk version is too old */ VDEV_AUX_UNSUP_FEAT, /* unsupported features */ VDEV_AUX_SPARED, /* hot spare used in another pool */ VDEV_AUX_ERR_EXCEEDED, /* too many errors */ VDEV_AUX_IO_FAILURE, /* experienced I/O failure */ VDEV_AUX_BAD_LOG, /* cannot read log chain(s) */ VDEV_AUX_EXTERNAL, /* external diagnosis */ VDEV_AUX_SPLIT_POOL /* vdev was split off into another pool */ } vdev_aux_t; /* * pool state. The following states are written to disk as part of the normal * SPA lifecycle: ACTIVE, EXPORTED, DESTROYED, SPARE, L2CACHE. The remaining * states are software abstractions used at various levels to communicate * pool state. */ typedef enum pool_state { POOL_STATE_ACTIVE = 0, /* In active use */ POOL_STATE_EXPORTED, /* Explicitly exported */ POOL_STATE_DESTROYED, /* Explicitly destroyed */ POOL_STATE_SPARE, /* Reserved for hot spare use */ POOL_STATE_L2CACHE, /* Level 2 ARC device */ POOL_STATE_UNINITIALIZED, /* Internal spa_t state */ POOL_STATE_UNAVAIL, /* Internal libzfs state */ POOL_STATE_POTENTIALLY_ACTIVE /* Internal libzfs state */ } pool_state_t; /* * Scan Functions. */ typedef enum pool_scan_func { POOL_SCAN_NONE, POOL_SCAN_SCRUB, POOL_SCAN_RESILVER, POOL_SCAN_FUNCS } pool_scan_func_t; /* * ZIO types. Needed to interpret vdev statistics below. */ typedef enum zio_type { ZIO_TYPE_NULL = 0, ZIO_TYPE_READ, ZIO_TYPE_WRITE, ZIO_TYPE_FREE, ZIO_TYPE_CLAIM, ZIO_TYPE_IOCTL, ZIO_TYPES } zio_type_t; /* * Pool statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct pool_scan_stat { /* values stored on disk */ uint64_t pss_func; /* pool_scan_func_t */ uint64_t pss_state; /* dsl_scan_state_t */ uint64_t pss_start_time; /* scan start time */ uint64_t pss_end_time; /* scan end time */ uint64_t pss_to_examine; /* total bytes to scan */ uint64_t pss_examined; /* total examined bytes */ uint64_t pss_to_process; /* total bytes to process */ uint64_t pss_processed; /* total processed bytes */ uint64_t pss_errors; /* scan errors */ /* values not stored on disk */ uint64_t pss_pass_exam; /* examined bytes per scan pass */ uint64_t pss_pass_start; /* start time of a scan pass */ } pool_scan_stat_t; typedef enum dsl_scan_state { DSS_NONE, DSS_SCANNING, DSS_FINISHED, DSS_CANCELED, DSS_NUM_STATES } dsl_scan_state_t; /* * Vdev statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct vdev_stat { hrtime_t vs_timestamp; /* time since vdev load */ uint64_t vs_state; /* vdev state */ uint64_t vs_aux; /* see vdev_aux_t */ uint64_t vs_alloc; /* space allocated */ uint64_t vs_space; /* total capacity */ uint64_t vs_dspace; /* deflated capacity */ uint64_t vs_rsize; /* replaceable dev size */ uint64_t vs_esize; /* expandable dev size */ uint64_t vs_ops[ZIO_TYPES]; /* operation count */ uint64_t vs_bytes[ZIO_TYPES]; /* bytes read/written */ uint64_t vs_read_errors; /* read errors */ uint64_t vs_write_errors; /* write errors */ uint64_t vs_checksum_errors; /* checksum errors */ uint64_t vs_self_healed; /* self-healed bytes */ uint64_t vs_scan_removing; /* removing? */ uint64_t vs_scan_processed; /* scan processed bytes */ } vdev_stat_t; /* * DDT statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct ddt_object { uint64_t ddo_count; /* number of elments in ddt */ uint64_t ddo_dspace; /* size of ddt on disk */ uint64_t ddo_mspace; /* size of ddt in-core */ } ddt_object_t; typedef struct ddt_stat { uint64_t dds_blocks; /* blocks */ uint64_t dds_lsize; /* logical size */ uint64_t dds_psize; /* physical size */ uint64_t dds_dsize; /* deflated allocated size */ uint64_t dds_ref_blocks; /* referenced blocks */ uint64_t dds_ref_lsize; /* referenced lsize * refcnt */ uint64_t dds_ref_psize; /* referenced psize * refcnt */ uint64_t dds_ref_dsize; /* referenced dsize * refcnt */ } ddt_stat_t; typedef struct ddt_histogram { ddt_stat_t ddh_stat[64]; /* power-of-two histogram buckets */ } ddt_histogram_t; #define ZVOL_DRIVER "zvol" #define ZFS_DRIVER "zfs" #define ZFS_DEV "/dev/zfs" /* general zvol path */ #define ZVOL_DIR "/dev" #define ZVOL_MAJOR 230 #define ZVOL_MINOR_BITS 4 #define ZVOL_MINOR_MASK ((1U << ZVOL_MINOR_BITS) - 1) #define ZVOL_MINORS (1 << 4) #define ZVOL_DEV_NAME "zd" #define ZVOL_PROP_NAME "name" #define ZVOL_DEFAULT_BLOCKSIZE 8192 /* * /dev/zfs ioctl numbers. */ typedef enum zfs_ioc { /* * Illumos - 69/128 numbers reserved. */ ZFS_IOC_FIRST = ('Z' << 8), ZFS_IOC = ZFS_IOC_FIRST, ZFS_IOC_POOL_CREATE = ZFS_IOC_FIRST, ZFS_IOC_POOL_DESTROY, ZFS_IOC_POOL_IMPORT, ZFS_IOC_POOL_EXPORT, ZFS_IOC_POOL_CONFIGS, ZFS_IOC_POOL_STATS, ZFS_IOC_POOL_TRYIMPORT, ZFS_IOC_POOL_SCAN, ZFS_IOC_POOL_FREEZE, ZFS_IOC_POOL_UPGRADE, ZFS_IOC_POOL_GET_HISTORY, ZFS_IOC_VDEV_ADD, ZFS_IOC_VDEV_REMOVE, ZFS_IOC_VDEV_SET_STATE, ZFS_IOC_VDEV_ATTACH, ZFS_IOC_VDEV_DETACH, ZFS_IOC_VDEV_SETPATH, ZFS_IOC_VDEV_SETFRU, ZFS_IOC_OBJSET_STATS, ZFS_IOC_OBJSET_ZPLPROPS, ZFS_IOC_DATASET_LIST_NEXT, ZFS_IOC_SNAPSHOT_LIST_NEXT, ZFS_IOC_SET_PROP, ZFS_IOC_CREATE, ZFS_IOC_DESTROY, ZFS_IOC_ROLLBACK, ZFS_IOC_RENAME, ZFS_IOC_RECV, ZFS_IOC_SEND, ZFS_IOC_INJECT_FAULT, ZFS_IOC_CLEAR_FAULT, ZFS_IOC_INJECT_LIST_NEXT, ZFS_IOC_ERROR_LOG, ZFS_IOC_CLEAR, ZFS_IOC_PROMOTE, ZFS_IOC_SNAPSHOT, ZFS_IOC_DSOBJ_TO_DSNAME, ZFS_IOC_OBJ_TO_PATH, ZFS_IOC_POOL_SET_PROPS, ZFS_IOC_POOL_GET_PROPS, ZFS_IOC_SET_FSACL, ZFS_IOC_GET_FSACL, ZFS_IOC_SHARE, ZFS_IOC_INHERIT_PROP, ZFS_IOC_SMB_ACL, ZFS_IOC_USERSPACE_ONE, ZFS_IOC_USERSPACE_MANY, ZFS_IOC_USERSPACE_UPGRADE, ZFS_IOC_HOLD, ZFS_IOC_RELEASE, ZFS_IOC_GET_HOLDS, ZFS_IOC_OBJSET_RECVD_PROPS, ZFS_IOC_VDEV_SPLIT, ZFS_IOC_NEXT_OBJ, ZFS_IOC_DIFF, ZFS_IOC_TMP_SNAPSHOT, ZFS_IOC_OBJ_TO_STATS, ZFS_IOC_SPACE_WRITTEN, ZFS_IOC_SPACE_SNAPS, ZFS_IOC_DESTROY_SNAPS, ZFS_IOC_POOL_REGUID, ZFS_IOC_POOL_REOPEN, ZFS_IOC_SEND_PROGRESS, ZFS_IOC_LOG_HISTORY, ZFS_IOC_SEND_NEW, ZFS_IOC_SEND_SPACE, ZFS_IOC_CLONE, /* * Linux - 3/64 numbers reserved. */ ZFS_IOC_LINUX = ('Z' << 8) + 0x80, ZFS_IOC_EVENTS_NEXT, ZFS_IOC_EVENTS_CLEAR, /* * FreeBSD - 1/64 numbers reserved. */ ZFS_IOC_FREEBSD = ('Z' << 8) + 0xC0, ZFS_IOC_LAST } zfs_ioc_t; /* * zvol ioctl to get dataset name */ #define BLKZNAME _IOR(0x12, 125, char[ZFS_MAXNAMELEN]) /* * Internal SPA load state. Used by FMA diagnosis engine. */ typedef enum { SPA_LOAD_NONE, /* no load in progress */ SPA_LOAD_OPEN, /* normal open */ SPA_LOAD_IMPORT, /* import in progress */ SPA_LOAD_TRYIMPORT, /* tryimport in progress */ SPA_LOAD_RECOVER, /* recovery requested */ SPA_LOAD_ERROR /* load failed */ } spa_load_state_t; /* * Bookmark name values. */ #define ZPOOL_ERR_LIST "error list" #define ZPOOL_ERR_DATASET "dataset" #define ZPOOL_ERR_OBJECT "object" #define HIS_MAX_RECORD_LEN (MAXPATHLEN + MAXPATHLEN + 1) /* * The following are names used in the nvlist describing * the pool's history log. */ #define ZPOOL_HIST_RECORD "history record" #define ZPOOL_HIST_TIME "history time" #define ZPOOL_HIST_CMD "history command" #define ZPOOL_HIST_WHO "history who" #define ZPOOL_HIST_ZONE "history zone" #define ZPOOL_HIST_HOST "history hostname" #define ZPOOL_HIST_TXG "history txg" #define ZPOOL_HIST_INT_EVENT "history internal event" #define ZPOOL_HIST_INT_STR "history internal str" #define ZPOOL_HIST_INT_NAME "internal_name" #define ZPOOL_HIST_IOCTL "ioctl" #define ZPOOL_HIST_INPUT_NVL "in_nvl" #define ZPOOL_HIST_OUTPUT_NVL "out_nvl" #define ZPOOL_HIST_DSNAME "dsname" #define ZPOOL_HIST_DSID "dsid" /* * Flags for ZFS_IOC_VDEV_SET_STATE */ #define ZFS_ONLINE_CHECKREMOVE 0x1 #define ZFS_ONLINE_UNSPARE 0x2 #define ZFS_ONLINE_FORCEFAULT 0x4 #define ZFS_ONLINE_EXPAND 0x8 #define ZFS_OFFLINE_TEMPORARY 0x1 /* * Flags for ZFS_IOC_POOL_IMPORT */ #define ZFS_IMPORT_NORMAL 0x0 #define ZFS_IMPORT_VERBATIM 0x1 #define ZFS_IMPORT_ANY_HOST 0x2 #define ZFS_IMPORT_MISSING_LOG 0x4 #define ZFS_IMPORT_ONLY 0x8 /* * Sysevent payload members. ZFS will generate the following sysevents with the * given payloads: * * ESC_ZFS_RESILVER_START * ESC_ZFS_RESILVER_END * ESC_ZFS_POOL_DESTROY * ESC_ZFS_POOL_REGUID * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * * ESC_ZFS_VDEV_REMOVE * ESC_ZFS_VDEV_CLEAR * ESC_ZFS_VDEV_CHECK * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_VDEV_PATH DATA_TYPE_STRING (optional) * ZFS_EV_VDEV_GUID DATA_TYPE_UINT64 */ #define ZFS_EV_POOL_NAME "pool_name" #define ZFS_EV_POOL_GUID "pool_guid" #define ZFS_EV_VDEV_PATH "vdev_path" #define ZFS_EV_VDEV_GUID "vdev_guid" #ifdef __cplusplus } #endif #endif /* _SYS_FS_ZFS_H */