/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2020 by Delphix. All rights reserved. * Copyright 2011 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2013, 2017 Joyent, Inc. All rights reserved. * Copyright (c) 2014 Integros [integros.com] * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2019 Datto Inc. */ /* Portions Copyright 2010 Robert Milkowski */ #ifndef _SYS_FS_ZFS_H #define _SYS_FS_ZFS_H #include #include #ifdef __cplusplus extern "C" { #endif /* * Types and constants shared between userland and the kernel. */ /* * Each dataset can be one of the following types. These constants can be * combined into masks that can be passed to various functions. */ typedef enum { ZFS_TYPE_FILESYSTEM = (1 << 0), ZFS_TYPE_SNAPSHOT = (1 << 1), ZFS_TYPE_VOLUME = (1 << 2), ZFS_TYPE_POOL = (1 << 3), ZFS_TYPE_BOOKMARK = (1 << 4) } zfs_type_t; /* * NB: lzc_dataset_type should be updated whenever a new objset type is added, * if it represents a real type of a dataset that can be created from userland. */ typedef enum dmu_objset_type { DMU_OST_NONE, DMU_OST_META, DMU_OST_ZFS, DMU_OST_ZVOL, DMU_OST_OTHER, /* For testing only! */ DMU_OST_ANY, /* Be careful! */ DMU_OST_NUMTYPES } dmu_objset_type_t; #define ZFS_TYPE_DATASET \ (ZFS_TYPE_FILESYSTEM | ZFS_TYPE_VOLUME | ZFS_TYPE_SNAPSHOT) /* * All of these include the terminating NUL byte. */ #define ZAP_MAXNAMELEN 256 #define ZAP_MAXVALUELEN (1024 * 8) #define ZAP_OLDMAXVALUELEN 1024 #define ZFS_MAX_DATASET_NAME_LEN 256 /* * Dataset properties are identified by these constants and must be added to * the end of this list to ensure that external consumers are not affected * by the change. If you make any changes to this list, be sure to update * the property table in module/zcommon/zfs_prop.c. */ typedef enum { ZPROP_CONT = -2, ZPROP_INVAL = -1, ZFS_PROP_TYPE = 0, ZFS_PROP_CREATION, ZFS_PROP_USED, ZFS_PROP_AVAILABLE, ZFS_PROP_REFERENCED, ZFS_PROP_COMPRESSRATIO, ZFS_PROP_MOUNTED, ZFS_PROP_ORIGIN, ZFS_PROP_QUOTA, ZFS_PROP_RESERVATION, ZFS_PROP_VOLSIZE, ZFS_PROP_VOLBLOCKSIZE, ZFS_PROP_RECORDSIZE, ZFS_PROP_MOUNTPOINT, ZFS_PROP_SHARENFS, ZFS_PROP_CHECKSUM, ZFS_PROP_COMPRESSION, ZFS_PROP_ATIME, ZFS_PROP_DEVICES, ZFS_PROP_EXEC, ZFS_PROP_SETUID, ZFS_PROP_READONLY, ZFS_PROP_ZONED, ZFS_PROP_SNAPDIR, ZFS_PROP_ACLMODE, ZFS_PROP_ACLINHERIT, ZFS_PROP_CREATETXG, ZFS_PROP_NAME, /* not exposed to the user */ ZFS_PROP_CANMOUNT, ZFS_PROP_ISCSIOPTIONS, /* not exposed to the user */ ZFS_PROP_XATTR, ZFS_PROP_NUMCLONES, /* not exposed to the user */ ZFS_PROP_COPIES, ZFS_PROP_VERSION, ZFS_PROP_UTF8ONLY, ZFS_PROP_NORMALIZE, ZFS_PROP_CASE, ZFS_PROP_VSCAN, ZFS_PROP_NBMAND, ZFS_PROP_SHARESMB, ZFS_PROP_REFQUOTA, ZFS_PROP_REFRESERVATION, ZFS_PROP_GUID, ZFS_PROP_PRIMARYCACHE, ZFS_PROP_SECONDARYCACHE, ZFS_PROP_USEDSNAP, ZFS_PROP_USEDDS, ZFS_PROP_USEDCHILD, ZFS_PROP_USEDREFRESERV, ZFS_PROP_USERACCOUNTING, /* not exposed to the user */ ZFS_PROP_STMF_SHAREINFO, /* not exposed to the user */ ZFS_PROP_DEFER_DESTROY, ZFS_PROP_USERREFS, ZFS_PROP_LOGBIAS, ZFS_PROP_UNIQUE, /* not exposed to the user */ ZFS_PROP_OBJSETID, ZFS_PROP_DEDUP, ZFS_PROP_MLSLABEL, ZFS_PROP_SYNC, ZFS_PROP_DNODESIZE, ZFS_PROP_REFRATIO, ZFS_PROP_WRITTEN, ZFS_PROP_CLONES, ZFS_PROP_LOGICALUSED, ZFS_PROP_LOGICALREFERENCED, ZFS_PROP_INCONSISTENT, /* not exposed to the user */ ZFS_PROP_VOLMODE, ZFS_PROP_FILESYSTEM_LIMIT, ZFS_PROP_SNAPSHOT_LIMIT, ZFS_PROP_FILESYSTEM_COUNT, ZFS_PROP_SNAPSHOT_COUNT, ZFS_PROP_SNAPDEV, ZFS_PROP_ACLTYPE, ZFS_PROP_SELINUX_CONTEXT, ZFS_PROP_SELINUX_FSCONTEXT, ZFS_PROP_SELINUX_DEFCONTEXT, ZFS_PROP_SELINUX_ROOTCONTEXT, ZFS_PROP_RELATIME, ZFS_PROP_REDUNDANT_METADATA, ZFS_PROP_OVERLAY, ZFS_PROP_PREV_SNAP, ZFS_PROP_RECEIVE_RESUME_TOKEN, ZFS_PROP_ENCRYPTION, ZFS_PROP_KEYLOCATION, ZFS_PROP_KEYFORMAT, ZFS_PROP_PBKDF2_SALT, ZFS_PROP_PBKDF2_ITERS, ZFS_PROP_ENCRYPTION_ROOT, ZFS_PROP_KEY_GUID, ZFS_PROP_KEYSTATUS, ZFS_PROP_REMAPTXG, /* obsolete - no longer used */ ZFS_PROP_SPECIAL_SMALL_BLOCKS, ZFS_PROP_IVSET_GUID, /* not exposed to the user */ ZFS_PROP_REDACTED, ZFS_PROP_REDACT_SNAPS, ZFS_NUM_PROPS } zfs_prop_t; typedef enum { ZFS_PROP_USERUSED, ZFS_PROP_USERQUOTA, ZFS_PROP_GROUPUSED, ZFS_PROP_GROUPQUOTA, ZFS_PROP_USEROBJUSED, ZFS_PROP_USEROBJQUOTA, ZFS_PROP_GROUPOBJUSED, ZFS_PROP_GROUPOBJQUOTA, ZFS_PROP_PROJECTUSED, ZFS_PROP_PROJECTQUOTA, ZFS_PROP_PROJECTOBJUSED, ZFS_PROP_PROJECTOBJQUOTA, ZFS_NUM_USERQUOTA_PROPS } zfs_userquota_prop_t; extern const char *zfs_userquota_prop_prefixes[ZFS_NUM_USERQUOTA_PROPS]; /* * Pool properties are identified by these constants and must be added to the * end of this list to ensure that external consumers are not affected * by the change. Properties must be registered in zfs_prop_init(). */ typedef enum { ZPOOL_PROP_INVAL = -1, ZPOOL_PROP_NAME, ZPOOL_PROP_SIZE, ZPOOL_PROP_CAPACITY, ZPOOL_PROP_ALTROOT, ZPOOL_PROP_HEALTH, ZPOOL_PROP_GUID, ZPOOL_PROP_VERSION, ZPOOL_PROP_BOOTFS, ZPOOL_PROP_DELEGATION, ZPOOL_PROP_AUTOREPLACE, ZPOOL_PROP_CACHEFILE, ZPOOL_PROP_FAILUREMODE, ZPOOL_PROP_LISTSNAPS, ZPOOL_PROP_AUTOEXPAND, ZPOOL_PROP_DEDUPDITTO, ZPOOL_PROP_DEDUPRATIO, ZPOOL_PROP_FREE, ZPOOL_PROP_ALLOCATED, ZPOOL_PROP_READONLY, ZPOOL_PROP_ASHIFT, ZPOOL_PROP_COMMENT, ZPOOL_PROP_EXPANDSZ, ZPOOL_PROP_FREEING, ZPOOL_PROP_FRAGMENTATION, ZPOOL_PROP_LEAKED, ZPOOL_PROP_MAXBLOCKSIZE, ZPOOL_PROP_TNAME, ZPOOL_PROP_MAXDNODESIZE, ZPOOL_PROP_MULTIHOST, ZPOOL_PROP_CHECKPOINT, ZPOOL_PROP_LOAD_GUID, ZPOOL_PROP_AUTOTRIM, ZPOOL_NUM_PROPS } zpool_prop_t; /* Small enough to not hog a whole line of printout in zpool(8). */ #define ZPROP_MAX_COMMENT 32 #define ZPROP_VALUE "value" #define ZPROP_SOURCE "source" typedef enum { ZPROP_SRC_NONE = 0x1, ZPROP_SRC_DEFAULT = 0x2, ZPROP_SRC_TEMPORARY = 0x4, ZPROP_SRC_LOCAL = 0x8, ZPROP_SRC_INHERITED = 0x10, ZPROP_SRC_RECEIVED = 0x20 } zprop_source_t; #define ZPROP_SRC_ALL 0x3f #define ZPROP_SOURCE_VAL_RECVD "$recvd" #define ZPROP_N_MORE_ERRORS "N_MORE_ERRORS" /* * Dataset flag implemented as a special entry in the props zap object * indicating that the dataset has received properties on or after * SPA_VERSION_RECVD_PROPS. The first such receive blows away local properties * just as it did in earlier versions, and thereafter, local properties are * preserved. */ #define ZPROP_HAS_RECVD "$hasrecvd" typedef enum { ZPROP_ERR_NOCLEAR = 0x1, /* failure to clear existing props */ ZPROP_ERR_NORESTORE = 0x2 /* failure to restore props on error */ } zprop_errflags_t; typedef int (*zprop_func)(int, void *); /* * Properties to be set on the root file system of a new pool * are stuffed into their own nvlist, which is then included in * the properties nvlist with the pool properties. */ #define ZPOOL_ROOTFS_PROPS "root-props-nvl" /* * Length of 'written@' and 'written#' */ #define ZFS_WRITTEN_PROP_PREFIX_LEN 8 /* * Dataset property functions shared between libzfs and kernel. */ const char *zfs_prop_default_string(zfs_prop_t); uint64_t zfs_prop_default_numeric(zfs_prop_t); boolean_t zfs_prop_readonly(zfs_prop_t); boolean_t zfs_prop_visible(zfs_prop_t prop); boolean_t zfs_prop_inheritable(zfs_prop_t); boolean_t zfs_prop_setonce(zfs_prop_t); boolean_t zfs_prop_encryption_key_param(zfs_prop_t); boolean_t zfs_prop_valid_keylocation(const char *, boolean_t); const char *zfs_prop_to_name(zfs_prop_t); zfs_prop_t zfs_name_to_prop(const char *); boolean_t zfs_prop_user(const char *); boolean_t zfs_prop_userquota(const char *); boolean_t zfs_prop_written(const char *); int zfs_prop_index_to_string(zfs_prop_t, uint64_t, const char **); int zfs_prop_string_to_index(zfs_prop_t, const char *, uint64_t *); uint64_t zfs_prop_random_value(zfs_prop_t, uint64_t seed); boolean_t zfs_prop_valid_for_type(int, zfs_type_t, boolean_t); /* * Pool property functions shared between libzfs and kernel. */ zpool_prop_t zpool_name_to_prop(const char *); const char *zpool_prop_to_name(zpool_prop_t); const char *zpool_prop_default_string(zpool_prop_t); uint64_t zpool_prop_default_numeric(zpool_prop_t); boolean_t zpool_prop_readonly(zpool_prop_t); boolean_t zpool_prop_setonce(zpool_prop_t); boolean_t zpool_prop_feature(const char *); boolean_t zpool_prop_unsupported(const char *); int zpool_prop_index_to_string(zpool_prop_t, uint64_t, const char **); int zpool_prop_string_to_index(zpool_prop_t, const char *, uint64_t *); uint64_t zpool_prop_random_value(zpool_prop_t, uint64_t seed); /* * Definitions for the Delegation. */ typedef enum { ZFS_DELEG_WHO_UNKNOWN = 0, ZFS_DELEG_USER = 'u', ZFS_DELEG_USER_SETS = 'U', ZFS_DELEG_GROUP = 'g', ZFS_DELEG_GROUP_SETS = 'G', ZFS_DELEG_EVERYONE = 'e', ZFS_DELEG_EVERYONE_SETS = 'E', ZFS_DELEG_CREATE = 'c', ZFS_DELEG_CREATE_SETS = 'C', ZFS_DELEG_NAMED_SET = 's', ZFS_DELEG_NAMED_SET_SETS = 'S' } zfs_deleg_who_type_t; typedef enum { ZFS_DELEG_NONE = 0, ZFS_DELEG_PERM_LOCAL = 1, ZFS_DELEG_PERM_DESCENDENT = 2, ZFS_DELEG_PERM_LOCALDESCENDENT = 3, ZFS_DELEG_PERM_CREATE = 4 } zfs_deleg_inherit_t; #define ZFS_DELEG_PERM_UID "uid" #define ZFS_DELEG_PERM_GID "gid" #define ZFS_DELEG_PERM_GROUPS "groups" #define ZFS_MLSLABEL_DEFAULT "none" #define ZFS_SMB_ACL_SRC "src" #define ZFS_SMB_ACL_TARGET "target" typedef enum { ZFS_CANMOUNT_OFF = 0, ZFS_CANMOUNT_ON = 1, ZFS_CANMOUNT_NOAUTO = 2 } zfs_canmount_type_t; typedef enum { ZFS_LOGBIAS_LATENCY = 0, ZFS_LOGBIAS_THROUGHPUT = 1 } zfs_logbias_op_t; typedef enum zfs_share_op { ZFS_SHARE_NFS = 0, ZFS_UNSHARE_NFS = 1, ZFS_SHARE_SMB = 2, ZFS_UNSHARE_SMB = 3 } zfs_share_op_t; typedef enum zfs_smb_acl_op { ZFS_SMB_ACL_ADD, ZFS_SMB_ACL_REMOVE, ZFS_SMB_ACL_RENAME, ZFS_SMB_ACL_PURGE } zfs_smb_acl_op_t; typedef enum zfs_cache_type { ZFS_CACHE_NONE = 0, ZFS_CACHE_METADATA = 1, ZFS_CACHE_ALL = 2 } zfs_cache_type_t; typedef enum { ZFS_SYNC_STANDARD = 0, ZFS_SYNC_ALWAYS = 1, ZFS_SYNC_DISABLED = 2 } zfs_sync_type_t; typedef enum { ZFS_XATTR_OFF = 0, ZFS_XATTR_DIR = 1, ZFS_XATTR_SA = 2 } zfs_xattr_type_t; typedef enum { ZFS_DNSIZE_LEGACY = 0, ZFS_DNSIZE_AUTO = 1, ZFS_DNSIZE_1K = 1024, ZFS_DNSIZE_2K = 2048, ZFS_DNSIZE_4K = 4096, ZFS_DNSIZE_8K = 8192, ZFS_DNSIZE_16K = 16384 } zfs_dnsize_type_t; typedef enum { ZFS_REDUNDANT_METADATA_ALL, ZFS_REDUNDANT_METADATA_MOST } zfs_redundant_metadata_type_t; typedef enum { ZFS_VOLMODE_DEFAULT = 0, ZFS_VOLMODE_GEOM = 1, ZFS_VOLMODE_DEV = 2, ZFS_VOLMODE_NONE = 3 } zfs_volmode_t; typedef enum zfs_keystatus { ZFS_KEYSTATUS_NONE = 0, ZFS_KEYSTATUS_UNAVAILABLE, ZFS_KEYSTATUS_AVAILABLE, } zfs_keystatus_t; typedef enum zfs_keyformat { ZFS_KEYFORMAT_NONE = 0, ZFS_KEYFORMAT_RAW, ZFS_KEYFORMAT_HEX, ZFS_KEYFORMAT_PASSPHRASE, ZFS_KEYFORMAT_FORMATS } zfs_keyformat_t; typedef enum zfs_key_location { ZFS_KEYLOCATION_NONE = 0, ZFS_KEYLOCATION_PROMPT, ZFS_KEYLOCATION_URI, ZFS_KEYLOCATION_LOCATIONS } zfs_keylocation_t; #define DEFAULT_PBKDF2_ITERATIONS 350000 #define MIN_PBKDF2_ITERATIONS 100000 /* * On-disk version number. */ #define SPA_VERSION_1 1ULL #define SPA_VERSION_2 2ULL #define SPA_VERSION_3 3ULL #define SPA_VERSION_4 4ULL #define SPA_VERSION_5 5ULL #define SPA_VERSION_6 6ULL #define SPA_VERSION_7 7ULL #define SPA_VERSION_8 8ULL #define SPA_VERSION_9 9ULL #define SPA_VERSION_10 10ULL #define SPA_VERSION_11 11ULL #define SPA_VERSION_12 12ULL #define SPA_VERSION_13 13ULL #define SPA_VERSION_14 14ULL #define SPA_VERSION_15 15ULL #define SPA_VERSION_16 16ULL #define SPA_VERSION_17 17ULL #define SPA_VERSION_18 18ULL #define SPA_VERSION_19 19ULL #define SPA_VERSION_20 20ULL #define SPA_VERSION_21 21ULL #define SPA_VERSION_22 22ULL #define SPA_VERSION_23 23ULL #define SPA_VERSION_24 24ULL #define SPA_VERSION_25 25ULL #define SPA_VERSION_26 26ULL #define SPA_VERSION_27 27ULL #define SPA_VERSION_28 28ULL #define SPA_VERSION_5000 5000ULL /* * The incrementing pool version number has been replaced by pool feature * flags. For more details, see zfeature.c. */ #define SPA_VERSION SPA_VERSION_5000 #define SPA_VERSION_STRING "5000" /* * Symbolic names for the changes that caused a SPA_VERSION switch. * Used in the code when checking for presence or absence of a feature. * Feel free to define multiple symbolic names for each version if there * were multiple changes to on-disk structures during that version. * * NOTE: When checking the current SPA_VERSION in your code, be sure * to use spa_version() since it reports the version of the * last synced uberblock. Checking the in-flight version can * be dangerous in some cases. */ #define SPA_VERSION_INITIAL SPA_VERSION_1 #define SPA_VERSION_DITTO_BLOCKS SPA_VERSION_2 #define SPA_VERSION_SPARES SPA_VERSION_3 #define SPA_VERSION_RAIDZ2 SPA_VERSION_3 #define SPA_VERSION_BPOBJ_ACCOUNT SPA_VERSION_3 #define SPA_VERSION_RAIDZ_DEFLATE SPA_VERSION_3 #define SPA_VERSION_DNODE_BYTES SPA_VERSION_3 #define SPA_VERSION_ZPOOL_HISTORY SPA_VERSION_4 #define SPA_VERSION_GZIP_COMPRESSION SPA_VERSION_5 #define SPA_VERSION_BOOTFS SPA_VERSION_6 #define SPA_VERSION_SLOGS SPA_VERSION_7 #define SPA_VERSION_DELEGATED_PERMS SPA_VERSION_8 #define SPA_VERSION_FUID SPA_VERSION_9 #define SPA_VERSION_REFRESERVATION SPA_VERSION_9 #define SPA_VERSION_REFQUOTA SPA_VERSION_9 #define SPA_VERSION_UNIQUE_ACCURATE SPA_VERSION_9 #define SPA_VERSION_L2CACHE SPA_VERSION_10 #define SPA_VERSION_NEXT_CLONES SPA_VERSION_11 #define SPA_VERSION_ORIGIN SPA_VERSION_11 #define SPA_VERSION_DSL_SCRUB SPA_VERSION_11 #define SPA_VERSION_SNAP_PROPS SPA_VERSION_12 #define SPA_VERSION_USED_BREAKDOWN SPA_VERSION_13 #define SPA_VERSION_PASSTHROUGH_X SPA_VERSION_14 #define SPA_VERSION_USERSPACE SPA_VERSION_15 #define SPA_VERSION_STMF_PROP SPA_VERSION_16 #define SPA_VERSION_RAIDZ3 SPA_VERSION_17 #define SPA_VERSION_USERREFS SPA_VERSION_18 #define SPA_VERSION_HOLES SPA_VERSION_19 #define SPA_VERSION_ZLE_COMPRESSION SPA_VERSION_20 #define SPA_VERSION_DEDUP SPA_VERSION_21 #define SPA_VERSION_RECVD_PROPS SPA_VERSION_22 #define SPA_VERSION_SLIM_ZIL SPA_VERSION_23 #define SPA_VERSION_SA SPA_VERSION_24 #define SPA_VERSION_SCAN SPA_VERSION_25 #define SPA_VERSION_DIR_CLONES SPA_VERSION_26 #define SPA_VERSION_DEADLISTS SPA_VERSION_26 #define SPA_VERSION_FAST_SNAP SPA_VERSION_27 #define SPA_VERSION_MULTI_REPLACE SPA_VERSION_28 #define SPA_VERSION_BEFORE_FEATURES SPA_VERSION_28 #define SPA_VERSION_FEATURES SPA_VERSION_5000 #define SPA_VERSION_IS_SUPPORTED(v) \ (((v) >= SPA_VERSION_INITIAL && (v) <= SPA_VERSION_BEFORE_FEATURES) || \ ((v) >= SPA_VERSION_FEATURES && (v) <= SPA_VERSION)) /* * ZPL version - rev'd whenever an incompatible on-disk format change * occurs. This is independent of SPA/DMU/ZAP versioning. You must * also update the version_table[] and help message in zfs_prop.c. */ #define ZPL_VERSION_1 1ULL #define ZPL_VERSION_2 2ULL #define ZPL_VERSION_3 3ULL #define ZPL_VERSION_4 4ULL #define ZPL_VERSION_5 5ULL #define ZPL_VERSION ZPL_VERSION_5 #define ZPL_VERSION_STRING "5" #define ZPL_VERSION_INITIAL ZPL_VERSION_1 #define ZPL_VERSION_DIRENT_TYPE ZPL_VERSION_2 #define ZPL_VERSION_FUID ZPL_VERSION_3 #define ZPL_VERSION_NORMALIZATION ZPL_VERSION_3 #define ZPL_VERSION_SYSATTR ZPL_VERSION_3 #define ZPL_VERSION_USERSPACE ZPL_VERSION_4 #define ZPL_VERSION_SA ZPL_VERSION_5 /* Persistent L2ARC version */ #define L2ARC_PERSISTENT_VERSION_1 1ULL #define L2ARC_PERSISTENT_VERSION L2ARC_PERSISTENT_VERSION_1 #define L2ARC_PERSISTENT_VERSION_STRING "1" /* Rewind policy information */ #define ZPOOL_NO_REWIND 1 /* No policy - default behavior */ #define ZPOOL_NEVER_REWIND 2 /* Do not search for best txg or rewind */ #define ZPOOL_TRY_REWIND 4 /* Search for best txg, but do not rewind */ #define ZPOOL_DO_REWIND 8 /* Rewind to best txg w/in deferred frees */ #define ZPOOL_EXTREME_REWIND 16 /* Allow extreme measures to find best txg */ #define ZPOOL_REWIND_MASK 28 /* All the possible rewind bits */ #define ZPOOL_REWIND_POLICIES 31 /* All the possible policy bits */ typedef struct zpool_load_policy { uint32_t zlp_rewind; /* rewind policy requested */ uint64_t zlp_maxmeta; /* max acceptable meta-data errors */ uint64_t zlp_maxdata; /* max acceptable data errors */ uint64_t zlp_txg; /* specific txg to load */ } zpool_load_policy_t; /* * The following are configuration names used in the nvlist describing a pool's * configuration. New on-disk names should be prefixed with ":" * (e.g. "org.openzfs:") to avoid conflicting names being developed * independently. */ #define ZPOOL_CONFIG_VERSION "version" #define ZPOOL_CONFIG_POOL_NAME "name" #define ZPOOL_CONFIG_POOL_STATE "state" #define ZPOOL_CONFIG_POOL_TXG "txg" #define ZPOOL_CONFIG_POOL_GUID "pool_guid" #define ZPOOL_CONFIG_CREATE_TXG "create_txg" #define ZPOOL_CONFIG_TOP_GUID "top_guid" #define ZPOOL_CONFIG_VDEV_TREE "vdev_tree" #define ZPOOL_CONFIG_TYPE "type" #define ZPOOL_CONFIG_CHILDREN "children" #define ZPOOL_CONFIG_ID "id" #define ZPOOL_CONFIG_GUID "guid" #define ZPOOL_CONFIG_INDIRECT_OBJECT "com.delphix:indirect_object" #define ZPOOL_CONFIG_INDIRECT_BIRTHS "com.delphix:indirect_births" #define ZPOOL_CONFIG_PREV_INDIRECT_VDEV "com.delphix:prev_indirect_vdev" #define ZPOOL_CONFIG_PATH "path" #define ZPOOL_CONFIG_DEVID "devid" #define ZPOOL_CONFIG_SPARE_ID "spareid" #define ZPOOL_CONFIG_METASLAB_ARRAY "metaslab_array" #define ZPOOL_CONFIG_METASLAB_SHIFT "metaslab_shift" #define ZPOOL_CONFIG_ASHIFT "ashift" #define ZPOOL_CONFIG_ASIZE "asize" #define ZPOOL_CONFIG_DTL "DTL" #define ZPOOL_CONFIG_SCAN_STATS "scan_stats" /* not stored on disk */ #define ZPOOL_CONFIG_REMOVAL_STATS "removal_stats" /* not stored on disk */ #define ZPOOL_CONFIG_CHECKPOINT_STATS "checkpoint_stats" /* not on disk */ #define ZPOOL_CONFIG_VDEV_STATS "vdev_stats" /* not stored on disk */ #define ZPOOL_CONFIG_INDIRECT_SIZE "indirect_size" /* not stored on disk */ /* container nvlist of extended stats */ #define ZPOOL_CONFIG_VDEV_STATS_EX "vdev_stats_ex" /* Active queue read/write stats */ #define ZPOOL_CONFIG_VDEV_SYNC_R_ACTIVE_QUEUE "vdev_sync_r_active_queue" #define ZPOOL_CONFIG_VDEV_SYNC_W_ACTIVE_QUEUE "vdev_sync_w_active_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_R_ACTIVE_QUEUE "vdev_async_r_active_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_W_ACTIVE_QUEUE "vdev_async_w_active_queue" #define ZPOOL_CONFIG_VDEV_SCRUB_ACTIVE_QUEUE "vdev_async_scrub_active_queue" #define ZPOOL_CONFIG_VDEV_TRIM_ACTIVE_QUEUE "vdev_async_trim_active_queue" /* Queue sizes */ #define ZPOOL_CONFIG_VDEV_SYNC_R_PEND_QUEUE "vdev_sync_r_pend_queue" #define ZPOOL_CONFIG_VDEV_SYNC_W_PEND_QUEUE "vdev_sync_w_pend_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_R_PEND_QUEUE "vdev_async_r_pend_queue" #define ZPOOL_CONFIG_VDEV_ASYNC_W_PEND_QUEUE "vdev_async_w_pend_queue" #define ZPOOL_CONFIG_VDEV_SCRUB_PEND_QUEUE "vdev_async_scrub_pend_queue" #define ZPOOL_CONFIG_VDEV_TRIM_PEND_QUEUE "vdev_async_trim_pend_queue" /* Latency read/write histogram stats */ #define ZPOOL_CONFIG_VDEV_TOT_R_LAT_HISTO "vdev_tot_r_lat_histo" #define ZPOOL_CONFIG_VDEV_TOT_W_LAT_HISTO "vdev_tot_w_lat_histo" #define ZPOOL_CONFIG_VDEV_DISK_R_LAT_HISTO "vdev_disk_r_lat_histo" #define ZPOOL_CONFIG_VDEV_DISK_W_LAT_HISTO "vdev_disk_w_lat_histo" #define ZPOOL_CONFIG_VDEV_SYNC_R_LAT_HISTO "vdev_sync_r_lat_histo" #define ZPOOL_CONFIG_VDEV_SYNC_W_LAT_HISTO "vdev_sync_w_lat_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_R_LAT_HISTO "vdev_async_r_lat_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_W_LAT_HISTO "vdev_async_w_lat_histo" #define ZPOOL_CONFIG_VDEV_SCRUB_LAT_HISTO "vdev_scrub_histo" #define ZPOOL_CONFIG_VDEV_TRIM_LAT_HISTO "vdev_trim_histo" /* Request size histograms */ #define ZPOOL_CONFIG_VDEV_SYNC_IND_R_HISTO "vdev_sync_ind_r_histo" #define ZPOOL_CONFIG_VDEV_SYNC_IND_W_HISTO "vdev_sync_ind_w_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_IND_R_HISTO "vdev_async_ind_r_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_IND_W_HISTO "vdev_async_ind_w_histo" #define ZPOOL_CONFIG_VDEV_IND_SCRUB_HISTO "vdev_ind_scrub_histo" #define ZPOOL_CONFIG_VDEV_IND_TRIM_HISTO "vdev_ind_trim_histo" #define ZPOOL_CONFIG_VDEV_SYNC_AGG_R_HISTO "vdev_sync_agg_r_histo" #define ZPOOL_CONFIG_VDEV_SYNC_AGG_W_HISTO "vdev_sync_agg_w_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_AGG_R_HISTO "vdev_async_agg_r_histo" #define ZPOOL_CONFIG_VDEV_ASYNC_AGG_W_HISTO "vdev_async_agg_w_histo" #define ZPOOL_CONFIG_VDEV_AGG_SCRUB_HISTO "vdev_agg_scrub_histo" #define ZPOOL_CONFIG_VDEV_AGG_TRIM_HISTO "vdev_agg_trim_histo" /* Number of slow IOs */ #define ZPOOL_CONFIG_VDEV_SLOW_IOS "vdev_slow_ios" /* vdev enclosure sysfs path */ #define ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH "vdev_enc_sysfs_path" #define ZPOOL_CONFIG_WHOLE_DISK "whole_disk" #define ZPOOL_CONFIG_ERRCOUNT "error_count" #define ZPOOL_CONFIG_NOT_PRESENT "not_present" #define ZPOOL_CONFIG_SPARES "spares" #define ZPOOL_CONFIG_IS_SPARE "is_spare" #define ZPOOL_CONFIG_NPARITY "nparity" #define ZPOOL_CONFIG_HOSTID "hostid" #define ZPOOL_CONFIG_HOSTNAME "hostname" #define ZPOOL_CONFIG_LOADED_TIME "initial_load_time" #define ZPOOL_CONFIG_UNSPARE "unspare" #define ZPOOL_CONFIG_PHYS_PATH "phys_path" #define ZPOOL_CONFIG_IS_LOG "is_log" #define ZPOOL_CONFIG_L2CACHE "l2cache" #define ZPOOL_CONFIG_HOLE_ARRAY "hole_array" #define ZPOOL_CONFIG_VDEV_CHILDREN "vdev_children" #define ZPOOL_CONFIG_IS_HOLE "is_hole" #define ZPOOL_CONFIG_DDT_HISTOGRAM "ddt_histogram" #define ZPOOL_CONFIG_DDT_OBJ_STATS "ddt_object_stats" #define ZPOOL_CONFIG_DDT_STATS "ddt_stats" #define ZPOOL_CONFIG_SPLIT "splitcfg" #define ZPOOL_CONFIG_ORIG_GUID "orig_guid" #define ZPOOL_CONFIG_SPLIT_GUID "split_guid" #define ZPOOL_CONFIG_SPLIT_LIST "guid_list" #define ZPOOL_CONFIG_REMOVING "removing" #define ZPOOL_CONFIG_RESILVER_TXG "resilver_txg" #define ZPOOL_CONFIG_REBUILD_TXG "rebuild_txg" #define ZPOOL_CONFIG_COMMENT "comment" #define ZPOOL_CONFIG_SUSPENDED "suspended" /* not stored on disk */ #define ZPOOL_CONFIG_SUSPENDED_REASON "suspended_reason" /* not stored */ #define ZPOOL_CONFIG_TIMESTAMP "timestamp" /* not stored on disk */ #define ZPOOL_CONFIG_BOOTFS "bootfs" /* not stored on disk */ #define ZPOOL_CONFIG_MISSING_DEVICES "missing_vdevs" /* not stored on disk */ #define ZPOOL_CONFIG_LOAD_INFO "load_info" /* not stored on disk */ #define ZPOOL_CONFIG_REWIND_INFO "rewind_info" /* not stored on disk */ #define ZPOOL_CONFIG_UNSUP_FEAT "unsup_feat" /* not stored on disk */ #define ZPOOL_CONFIG_ENABLED_FEAT "enabled_feat" /* not stored on disk */ #define ZPOOL_CONFIG_CAN_RDONLY "can_rdonly" /* not stored on disk */ #define ZPOOL_CONFIG_FEATURES_FOR_READ "features_for_read" #define ZPOOL_CONFIG_FEATURE_STATS "feature_stats" /* not stored on disk */ #define ZPOOL_CONFIG_ERRATA "errata" /* not stored on disk */ #define ZPOOL_CONFIG_VDEV_TOP_ZAP "com.delphix:vdev_zap_top" #define ZPOOL_CONFIG_VDEV_LEAF_ZAP "com.delphix:vdev_zap_leaf" #define ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS "com.delphix:has_per_vdev_zaps" #define ZPOOL_CONFIG_RESILVER_DEFER "com.datto:resilver_defer" #define ZPOOL_CONFIG_CACHEFILE "cachefile" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_STATE "mmp_state" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_TXG "mmp_txg" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_SEQ "mmp_seq" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_HOSTNAME "mmp_hostname" /* not stored on disk */ #define ZPOOL_CONFIG_MMP_HOSTID "mmp_hostid" /* not stored on disk */ #define ZPOOL_CONFIG_ALLOCATION_BIAS "alloc_bias" /* not stored on disk */ #define ZPOOL_CONFIG_EXPANSION_TIME "expansion_time" /* not stored */ #define ZPOOL_CONFIG_REBUILD_STATS "org.openzfs:rebuild_stats" /* * The persistent vdev state is stored as separate values rather than a single * 'vdev_state' entry. This is because a device can be in multiple states, such * as offline and degraded. */ #define ZPOOL_CONFIG_OFFLINE "offline" #define ZPOOL_CONFIG_FAULTED "faulted" #define ZPOOL_CONFIG_DEGRADED "degraded" #define ZPOOL_CONFIG_REMOVED "removed" #define ZPOOL_CONFIG_FRU "fru" #define ZPOOL_CONFIG_AUX_STATE "aux_state" /* Pool load policy parameters */ #define ZPOOL_LOAD_POLICY "load-policy" #define ZPOOL_LOAD_REWIND_POLICY "load-rewind-policy" #define ZPOOL_LOAD_REQUEST_TXG "load-request-txg" #define ZPOOL_LOAD_META_THRESH "load-meta-thresh" #define ZPOOL_LOAD_DATA_THRESH "load-data-thresh" /* Rewind data discovered */ #define ZPOOL_CONFIG_LOAD_TIME "rewind_txg_ts" #define ZPOOL_CONFIG_LOAD_DATA_ERRORS "verify_data_errors" #define ZPOOL_CONFIG_REWIND_TIME "seconds_of_rewind" /* dRAID configuration */ #define ZPOOL_CONFIG_DRAID_NDATA "draid_ndata" #define ZPOOL_CONFIG_DRAID_NSPARES "draid_nspares" #define ZPOOL_CONFIG_DRAID_NGROUPS "draid_ngroups" #define VDEV_TYPE_ROOT "root" #define VDEV_TYPE_MIRROR "mirror" #define VDEV_TYPE_REPLACING "replacing" #define VDEV_TYPE_RAIDZ "raidz" #define VDEV_TYPE_DRAID "draid" #define VDEV_TYPE_DRAID_SPARE "dspare" #define VDEV_TYPE_DISK "disk" #define VDEV_TYPE_FILE "file" #define VDEV_TYPE_MISSING "missing" #define VDEV_TYPE_HOLE "hole" #define VDEV_TYPE_SPARE "spare" #define VDEV_TYPE_LOG "log" #define VDEV_TYPE_L2CACHE "l2cache" #define VDEV_TYPE_INDIRECT "indirect" #define VDEV_RAIDZ_MAXPARITY 3 #define VDEV_DRAID_MAXPARITY 3 #define VDEV_DRAID_MIN_CHILDREN 2 #define VDEV_DRAID_MAX_CHILDREN UINT8_MAX /* VDEV_TOP_ZAP_* are used in top-level vdev ZAP objects. */ #define VDEV_TOP_ZAP_INDIRECT_OBSOLETE_SM \ "com.delphix:indirect_obsolete_sm" #define VDEV_TOP_ZAP_OBSOLETE_COUNTS_ARE_PRECISE \ "com.delphix:obsolete_counts_are_precise" #define VDEV_TOP_ZAP_POOL_CHECKPOINT_SM \ "com.delphix:pool_checkpoint_sm" #define VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS \ "com.delphix:ms_unflushed_phys_txgs" #define VDEV_TOP_ZAP_VDEV_REBUILD_PHYS \ "org.openzfs:vdev_rebuild" #define VDEV_TOP_ZAP_ALLOCATION_BIAS \ "org.zfsonlinux:allocation_bias" /* vdev metaslab allocation bias */ #define VDEV_ALLOC_BIAS_LOG "log" #define VDEV_ALLOC_BIAS_SPECIAL "special" #define VDEV_ALLOC_BIAS_DEDUP "dedup" /* vdev initialize state */ #define VDEV_LEAF_ZAP_INITIALIZE_LAST_OFFSET \ "com.delphix:next_offset_to_initialize" #define VDEV_LEAF_ZAP_INITIALIZE_STATE \ "com.delphix:vdev_initialize_state" #define VDEV_LEAF_ZAP_INITIALIZE_ACTION_TIME \ "com.delphix:vdev_initialize_action_time" /* vdev TRIM state */ #define VDEV_LEAF_ZAP_TRIM_LAST_OFFSET \ "org.zfsonlinux:next_offset_to_trim" #define VDEV_LEAF_ZAP_TRIM_STATE \ "org.zfsonlinux:vdev_trim_state" #define VDEV_LEAF_ZAP_TRIM_ACTION_TIME \ "org.zfsonlinux:vdev_trim_action_time" #define VDEV_LEAF_ZAP_TRIM_RATE \ "org.zfsonlinux:vdev_trim_rate" #define VDEV_LEAF_ZAP_TRIM_PARTIAL \ "org.zfsonlinux:vdev_trim_partial" #define VDEV_LEAF_ZAP_TRIM_SECURE \ "org.zfsonlinux:vdev_trim_secure" /* * This is needed in userland to report the minimum necessary device size. */ #define SPA_MINDEVSIZE (64ULL << 20) /* * Set if the fragmentation has not yet been calculated. This can happen * because the space maps have not been upgraded or the histogram feature * is not enabled. */ #define ZFS_FRAG_INVALID UINT64_MAX /* * The location of the pool configuration repository, shared between kernel and * userland. */ #define ZPOOL_CACHE_BOOT "/boot/zfs/zpool.cache" #define ZPOOL_CACHE "/etc/zfs/zpool.cache" /* * vdev states are ordered from least to most healthy. * A vdev that's CANT_OPEN or below is considered unusable. */ typedef enum vdev_state { VDEV_STATE_UNKNOWN = 0, /* Uninitialized vdev */ VDEV_STATE_CLOSED, /* Not currently open */ VDEV_STATE_OFFLINE, /* Not allowed to open */ VDEV_STATE_REMOVED, /* Explicitly removed from system */ VDEV_STATE_CANT_OPEN, /* Tried to open, but failed */ VDEV_STATE_FAULTED, /* External request to fault device */ VDEV_STATE_DEGRADED, /* Replicated vdev with unhealthy kids */ VDEV_STATE_HEALTHY /* Presumed good */ } vdev_state_t; #define VDEV_STATE_ONLINE VDEV_STATE_HEALTHY /* * vdev aux states. When a vdev is in the CANT_OPEN state, the aux field * of the vdev stats structure uses these constants to distinguish why. */ typedef enum vdev_aux { VDEV_AUX_NONE, /* no error */ VDEV_AUX_OPEN_FAILED, /* ldi_open_*() or vn_open() failed */ VDEV_AUX_CORRUPT_DATA, /* bad label or disk contents */ VDEV_AUX_NO_REPLICAS, /* insufficient number of replicas */ VDEV_AUX_BAD_GUID_SUM, /* vdev guid sum doesn't match */ VDEV_AUX_TOO_SMALL, /* vdev size is too small */ VDEV_AUX_BAD_LABEL, /* the label is OK but invalid */ VDEV_AUX_VERSION_NEWER, /* on-disk version is too new */ VDEV_AUX_VERSION_OLDER, /* on-disk version is too old */ VDEV_AUX_UNSUP_FEAT, /* unsupported features */ VDEV_AUX_SPARED, /* hot spare used in another pool */ VDEV_AUX_ERR_EXCEEDED, /* too many errors */ VDEV_AUX_IO_FAILURE, /* experienced I/O failure */ VDEV_AUX_BAD_LOG, /* cannot read log chain(s) */ VDEV_AUX_EXTERNAL, /* external diagnosis or forced fault */ VDEV_AUX_SPLIT_POOL, /* vdev was split off into another pool */ VDEV_AUX_BAD_ASHIFT, /* vdev ashift is invalid */ VDEV_AUX_EXTERNAL_PERSIST, /* persistent forced fault */ VDEV_AUX_ACTIVE, /* vdev active on a different host */ VDEV_AUX_CHILDREN_OFFLINE, /* all children are offline */ VDEV_AUX_ASHIFT_TOO_BIG, /* vdev's min block size is too large */ } vdev_aux_t; /* * pool state. The following states are written to disk as part of the normal * SPA lifecycle: ACTIVE, EXPORTED, DESTROYED, SPARE, L2CACHE. The remaining * states are software abstractions used at various levels to communicate * pool state. */ typedef enum pool_state { POOL_STATE_ACTIVE = 0, /* In active use */ POOL_STATE_EXPORTED, /* Explicitly exported */ POOL_STATE_DESTROYED, /* Explicitly destroyed */ POOL_STATE_SPARE, /* Reserved for hot spare use */ POOL_STATE_L2CACHE, /* Level 2 ARC device */ POOL_STATE_UNINITIALIZED, /* Internal spa_t state */ POOL_STATE_UNAVAIL, /* Internal libzfs state */ POOL_STATE_POTENTIALLY_ACTIVE /* Internal libzfs state */ } pool_state_t; /* * mmp state. The following states provide additional detail describing * why a pool couldn't be safely imported. */ typedef enum mmp_state { MMP_STATE_ACTIVE = 0, /* In active use */ MMP_STATE_INACTIVE, /* Inactive and safe to import */ MMP_STATE_NO_HOSTID /* System hostid is not set */ } mmp_state_t; /* * Scan Functions. */ typedef enum pool_scan_func { POOL_SCAN_NONE, POOL_SCAN_SCRUB, POOL_SCAN_RESILVER, POOL_SCAN_FUNCS } pool_scan_func_t; /* * Used to control scrub pause and resume. */ typedef enum pool_scrub_cmd { POOL_SCRUB_NORMAL = 0, POOL_SCRUB_PAUSE, POOL_SCRUB_FLAGS_END } pool_scrub_cmd_t; typedef enum { CS_NONE, CS_CHECKPOINT_EXISTS, CS_CHECKPOINT_DISCARDING, CS_NUM_STATES } checkpoint_state_t; typedef struct pool_checkpoint_stat { uint64_t pcs_state; /* checkpoint_state_t */ uint64_t pcs_start_time; /* time checkpoint/discard started */ uint64_t pcs_space; /* checkpointed space */ } pool_checkpoint_stat_t; /* * ZIO types. Needed to interpret vdev statistics below. */ typedef enum zio_type { ZIO_TYPE_NULL = 0, ZIO_TYPE_READ, ZIO_TYPE_WRITE, ZIO_TYPE_FREE, ZIO_TYPE_CLAIM, ZIO_TYPE_IOCTL, ZIO_TYPE_TRIM, ZIO_TYPES } zio_type_t; /* * Pool statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct pool_scan_stat { /* values stored on disk */ uint64_t pss_func; /* pool_scan_func_t */ uint64_t pss_state; /* dsl_scan_state_t */ uint64_t pss_start_time; /* scan start time */ uint64_t pss_end_time; /* scan end time */ uint64_t pss_to_examine; /* total bytes to scan */ uint64_t pss_examined; /* total bytes located by scanner */ uint64_t pss_to_process; /* total bytes to process */ uint64_t pss_processed; /* total processed bytes */ uint64_t pss_errors; /* scan errors */ /* values not stored on disk */ uint64_t pss_pass_exam; /* examined bytes per scan pass */ uint64_t pss_pass_start; /* start time of a scan pass */ uint64_t pss_pass_scrub_pause; /* pause time of a scrub pass */ /* cumulative time scrub spent paused, needed for rate calculation */ uint64_t pss_pass_scrub_spent_paused; uint64_t pss_pass_issued; /* issued bytes per scan pass */ uint64_t pss_issued; /* total bytes checked by scanner */ } pool_scan_stat_t; typedef struct pool_removal_stat { uint64_t prs_state; /* dsl_scan_state_t */ uint64_t prs_removing_vdev; uint64_t prs_start_time; uint64_t prs_end_time; uint64_t prs_to_copy; /* bytes that need to be copied */ uint64_t prs_copied; /* bytes copied so far */ /* * bytes of memory used for indirect mappings. * This includes all removed vdevs. */ uint64_t prs_mapping_memory; } pool_removal_stat_t; typedef enum dsl_scan_state { DSS_NONE, DSS_SCANNING, DSS_FINISHED, DSS_CANCELED, DSS_NUM_STATES } dsl_scan_state_t; typedef struct vdev_rebuild_stat { uint64_t vrs_state; /* vdev_rebuild_state_t */ uint64_t vrs_start_time; /* time_t */ uint64_t vrs_end_time; /* time_t */ uint64_t vrs_scan_time_ms; /* total run time (millisecs) */ uint64_t vrs_bytes_scanned; /* allocated bytes scanned */ uint64_t vrs_bytes_issued; /* read bytes issued */ uint64_t vrs_bytes_rebuilt; /* rebuilt bytes */ uint64_t vrs_bytes_est; /* total bytes to scan */ uint64_t vrs_errors; /* scanning errors */ uint64_t vrs_pass_time_ms; /* pass run time (millisecs) */ uint64_t vrs_pass_bytes_scanned; /* bytes scanned since start/resume */ uint64_t vrs_pass_bytes_issued; /* bytes rebuilt since start/resume */ } vdev_rebuild_stat_t; /* * Errata described by https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-ER. * The ordering of this enum must be maintained to ensure the errata identifiers * map to the correct documentation. New errata may only be appended to the * list and must contain corresponding documentation at the above link. */ typedef enum zpool_errata { ZPOOL_ERRATA_NONE, ZPOOL_ERRATA_ZOL_2094_SCRUB, ZPOOL_ERRATA_ZOL_2094_ASYNC_DESTROY, ZPOOL_ERRATA_ZOL_6845_ENCRYPTION, ZPOOL_ERRATA_ZOL_8308_ENCRYPTION, } zpool_errata_t; /* * Vdev statistics. Note: all fields should be 64-bit because this * is passed between kernel and user land as an nvlist uint64 array. * * The vs_ops[] and vs_bytes[] arrays must always be an array size of 6 in * order to keep subsequent members at their known fixed offsets. When * adding a new field it must be added to the end the structure. */ #define VS_ZIO_TYPES 6 typedef struct vdev_stat { hrtime_t vs_timestamp; /* time since vdev load */ uint64_t vs_state; /* vdev state */ uint64_t vs_aux; /* see vdev_aux_t */ uint64_t vs_alloc; /* space allocated */ uint64_t vs_space; /* total capacity */ uint64_t vs_dspace; /* deflated capacity */ uint64_t vs_rsize; /* replaceable dev size */ uint64_t vs_esize; /* expandable dev size */ uint64_t vs_ops[VS_ZIO_TYPES]; /* operation count */ uint64_t vs_bytes[VS_ZIO_TYPES]; /* bytes read/written */ uint64_t vs_read_errors; /* read errors */ uint64_t vs_write_errors; /* write errors */ uint64_t vs_checksum_errors; /* checksum errors */ uint64_t vs_initialize_errors; /* initializing errors */ uint64_t vs_self_healed; /* self-healed bytes */ uint64_t vs_scan_removing; /* removing? */ uint64_t vs_scan_processed; /* scan processed bytes */ uint64_t vs_fragmentation; /* device fragmentation */ uint64_t vs_initialize_bytes_done; /* bytes initialized */ uint64_t vs_initialize_bytes_est; /* total bytes to initialize */ uint64_t vs_initialize_state; /* vdev_initializing_state_t */ uint64_t vs_initialize_action_time; /* time_t */ uint64_t vs_checkpoint_space; /* checkpoint-consumed space */ uint64_t vs_resilver_deferred; /* resilver deferred */ uint64_t vs_slow_ios; /* slow IOs */ uint64_t vs_trim_errors; /* trimming errors */ uint64_t vs_trim_notsup; /* supported by device */ uint64_t vs_trim_bytes_done; /* bytes trimmed */ uint64_t vs_trim_bytes_est; /* total bytes to trim */ uint64_t vs_trim_state; /* vdev_trim_state_t */ uint64_t vs_trim_action_time; /* time_t */ uint64_t vs_rebuild_processed; /* bytes rebuilt */ uint64_t vs_configured_ashift; /* TLV vdev_ashift */ uint64_t vs_logical_ashift; /* vdev_logical_ashift */ uint64_t vs_physical_ashift; /* vdev_physical_ashift */ } vdev_stat_t; /* BEGIN CSTYLED */ #define VDEV_STAT_VALID(field, uint64_t_field_count) \ ((uint64_t_field_count * sizeof (uint64_t)) >= \ (offsetof(vdev_stat_t, field) + sizeof (((vdev_stat_t *)NULL)->field))) /* END CSTYLED */ /* * Extended stats * * These are stats which aren't included in the original iostat output. For * convenience, they are grouped together in vdev_stat_ex, although each stat * is individually exported as an nvlist. */ typedef struct vdev_stat_ex { /* Number of ZIOs issued to disk and waiting to finish */ uint64_t vsx_active_queue[ZIO_PRIORITY_NUM_QUEUEABLE]; /* Number of ZIOs pending to be issued to disk */ uint64_t vsx_pend_queue[ZIO_PRIORITY_NUM_QUEUEABLE]; /* * Below are the histograms for various latencies. Buckets are in * units of nanoseconds. */ /* * 2^37 nanoseconds = 134s. Timeouts will probably start kicking in * before this. */ #define VDEV_L_HISTO_BUCKETS 37 /* Latency histo buckets */ #define VDEV_RQ_HISTO_BUCKETS 25 /* Request size histo buckets */ /* Amount of time in ZIO queue (ns) */ uint64_t vsx_queue_histo[ZIO_PRIORITY_NUM_QUEUEABLE] [VDEV_L_HISTO_BUCKETS]; /* Total ZIO latency (ns). Includes queuing and disk access time */ uint64_t vsx_total_histo[ZIO_TYPES][VDEV_L_HISTO_BUCKETS]; /* Amount of time to read/write the disk (ns) */ uint64_t vsx_disk_histo[ZIO_TYPES][VDEV_L_HISTO_BUCKETS]; /* "lookup the bucket for a value" histogram macros */ #define HISTO(val, buckets) (val != 0 ? MIN(highbit64(val) - 1, \ buckets - 1) : 0) #define L_HISTO(a) HISTO(a, VDEV_L_HISTO_BUCKETS) #define RQ_HISTO(a) HISTO(a, VDEV_RQ_HISTO_BUCKETS) /* Physical IO histogram */ uint64_t vsx_ind_histo[ZIO_PRIORITY_NUM_QUEUEABLE] [VDEV_RQ_HISTO_BUCKETS]; /* Delegated (aggregated) physical IO histogram */ uint64_t vsx_agg_histo[ZIO_PRIORITY_NUM_QUEUEABLE] [VDEV_RQ_HISTO_BUCKETS]; } vdev_stat_ex_t; /* * Initialize functions. */ typedef enum pool_initialize_func { POOL_INITIALIZE_START, POOL_INITIALIZE_CANCEL, POOL_INITIALIZE_SUSPEND, POOL_INITIALIZE_FUNCS } pool_initialize_func_t; /* * TRIM functions. */ typedef enum pool_trim_func { POOL_TRIM_START, POOL_TRIM_CANCEL, POOL_TRIM_SUSPEND, POOL_TRIM_FUNCS } pool_trim_func_t; /* * DDT statistics. Note: all fields should be 64-bit because this * is passed between kernel and userland as an nvlist uint64 array. */ typedef struct ddt_object { uint64_t ddo_count; /* number of elements in ddt */ uint64_t ddo_dspace; /* size of ddt on disk */ uint64_t ddo_mspace; /* size of ddt in-core */ } ddt_object_t; typedef struct ddt_stat { uint64_t dds_blocks; /* blocks */ uint64_t dds_lsize; /* logical size */ uint64_t dds_psize; /* physical size */ uint64_t dds_dsize; /* deflated allocated size */ uint64_t dds_ref_blocks; /* referenced blocks */ uint64_t dds_ref_lsize; /* referenced lsize * refcnt */ uint64_t dds_ref_psize; /* referenced psize * refcnt */ uint64_t dds_ref_dsize; /* referenced dsize * refcnt */ } ddt_stat_t; typedef struct ddt_histogram { ddt_stat_t ddh_stat[64]; /* power-of-two histogram buckets */ } ddt_histogram_t; #define ZVOL_DRIVER "zvol" #define ZFS_DRIVER "zfs" #define ZFS_DEV "/dev/zfs" #define ZFS_SUPER_MAGIC 0x2fc12fc1 /* general zvol path */ #define ZVOL_DIR "/dev/zvol/" #define ZVOL_MAJOR 230 #define ZVOL_MINOR_BITS 4 #define ZVOL_MINOR_MASK ((1U << ZVOL_MINOR_BITS) - 1) #define ZVOL_MINORS (1 << 4) #define ZVOL_DEV_NAME "zd" #define ZVOL_PROP_NAME "name" #define ZVOL_DEFAULT_BLOCKSIZE 8192 typedef enum { VDEV_INITIALIZE_NONE, VDEV_INITIALIZE_ACTIVE, VDEV_INITIALIZE_CANCELED, VDEV_INITIALIZE_SUSPENDED, VDEV_INITIALIZE_COMPLETE } vdev_initializing_state_t; typedef enum { VDEV_TRIM_NONE, VDEV_TRIM_ACTIVE, VDEV_TRIM_CANCELED, VDEV_TRIM_SUSPENDED, VDEV_TRIM_COMPLETE, } vdev_trim_state_t; typedef enum { VDEV_REBUILD_NONE, VDEV_REBUILD_ACTIVE, VDEV_REBUILD_CANCELED, VDEV_REBUILD_COMPLETE, } vdev_rebuild_state_t; /* * nvlist name constants. Facilitate restricting snapshot iteration range for * the "list next snapshot" ioctl */ #define SNAP_ITER_MIN_TXG "snap_iter_min_txg" #define SNAP_ITER_MAX_TXG "snap_iter_max_txg" /* * /dev/zfs ioctl numbers. * * These numbers cannot change over time. New ioctl numbers must be appended. */ typedef enum zfs_ioc { /* * Core features - 81/128 numbers reserved. */ #ifdef __FreeBSD__ ZFS_IOC_FIRST = 0, #else ZFS_IOC_FIRST = ('Z' << 8), #endif ZFS_IOC = ZFS_IOC_FIRST, ZFS_IOC_POOL_CREATE = ZFS_IOC_FIRST, /* 0x5a00 */ ZFS_IOC_POOL_DESTROY, /* 0x5a01 */ ZFS_IOC_POOL_IMPORT, /* 0x5a02 */ ZFS_IOC_POOL_EXPORT, /* 0x5a03 */ ZFS_IOC_POOL_CONFIGS, /* 0x5a04 */ ZFS_IOC_POOL_STATS, /* 0x5a05 */ ZFS_IOC_POOL_TRYIMPORT, /* 0x5a06 */ ZFS_IOC_POOL_SCAN, /* 0x5a07 */ ZFS_IOC_POOL_FREEZE, /* 0x5a08 */ ZFS_IOC_POOL_UPGRADE, /* 0x5a09 */ ZFS_IOC_POOL_GET_HISTORY, /* 0x5a0a */ ZFS_IOC_VDEV_ADD, /* 0x5a0b */ ZFS_IOC_VDEV_REMOVE, /* 0x5a0c */ ZFS_IOC_VDEV_SET_STATE, /* 0x5a0d */ ZFS_IOC_VDEV_ATTACH, /* 0x5a0e */ ZFS_IOC_VDEV_DETACH, /* 0x5a0f */ ZFS_IOC_VDEV_SETPATH, /* 0x5a10 */ ZFS_IOC_VDEV_SETFRU, /* 0x5a11 */ ZFS_IOC_OBJSET_STATS, /* 0x5a12 */ ZFS_IOC_OBJSET_ZPLPROPS, /* 0x5a13 */ ZFS_IOC_DATASET_LIST_NEXT, /* 0x5a14 */ ZFS_IOC_SNAPSHOT_LIST_NEXT, /* 0x5a15 */ ZFS_IOC_SET_PROP, /* 0x5a16 */ ZFS_IOC_CREATE, /* 0x5a17 */ ZFS_IOC_DESTROY, /* 0x5a18 */ ZFS_IOC_ROLLBACK, /* 0x5a19 */ ZFS_IOC_RENAME, /* 0x5a1a */ ZFS_IOC_RECV, /* 0x5a1b */ ZFS_IOC_SEND, /* 0x5a1c */ ZFS_IOC_INJECT_FAULT, /* 0x5a1d */ ZFS_IOC_CLEAR_FAULT, /* 0x5a1e */ ZFS_IOC_INJECT_LIST_NEXT, /* 0x5a1f */ ZFS_IOC_ERROR_LOG, /* 0x5a20 */ ZFS_IOC_CLEAR, /* 0x5a21 */ ZFS_IOC_PROMOTE, /* 0x5a22 */ ZFS_IOC_SNAPSHOT, /* 0x5a23 */ ZFS_IOC_DSOBJ_TO_DSNAME, /* 0x5a24 */ ZFS_IOC_OBJ_TO_PATH, /* 0x5a25 */ ZFS_IOC_POOL_SET_PROPS, /* 0x5a26 */ ZFS_IOC_POOL_GET_PROPS, /* 0x5a27 */ ZFS_IOC_SET_FSACL, /* 0x5a28 */ ZFS_IOC_GET_FSACL, /* 0x5a29 */ ZFS_IOC_SHARE, /* 0x5a2a */ ZFS_IOC_INHERIT_PROP, /* 0x5a2b */ ZFS_IOC_SMB_ACL, /* 0x5a2c */ ZFS_IOC_USERSPACE_ONE, /* 0x5a2d */ ZFS_IOC_USERSPACE_MANY, /* 0x5a2e */ ZFS_IOC_USERSPACE_UPGRADE, /* 0x5a2f */ ZFS_IOC_HOLD, /* 0x5a30 */ ZFS_IOC_RELEASE, /* 0x5a31 */ ZFS_IOC_GET_HOLDS, /* 0x5a32 */ ZFS_IOC_OBJSET_RECVD_PROPS, /* 0x5a33 */ ZFS_IOC_VDEV_SPLIT, /* 0x5a34 */ ZFS_IOC_NEXT_OBJ, /* 0x5a35 */ ZFS_IOC_DIFF, /* 0x5a36 */ ZFS_IOC_TMP_SNAPSHOT, /* 0x5a37 */ ZFS_IOC_OBJ_TO_STATS, /* 0x5a38 */ ZFS_IOC_SPACE_WRITTEN, /* 0x5a39 */ ZFS_IOC_SPACE_SNAPS, /* 0x5a3a */ ZFS_IOC_DESTROY_SNAPS, /* 0x5a3b */ ZFS_IOC_POOL_REGUID, /* 0x5a3c */ ZFS_IOC_POOL_REOPEN, /* 0x5a3d */ ZFS_IOC_SEND_PROGRESS, /* 0x5a3e */ ZFS_IOC_LOG_HISTORY, /* 0x5a3f */ ZFS_IOC_SEND_NEW, /* 0x5a40 */ ZFS_IOC_SEND_SPACE, /* 0x5a41 */ ZFS_IOC_CLONE, /* 0x5a42 */ ZFS_IOC_BOOKMARK, /* 0x5a43 */ ZFS_IOC_GET_BOOKMARKS, /* 0x5a44 */ ZFS_IOC_DESTROY_BOOKMARKS, /* 0x5a45 */ ZFS_IOC_RECV_NEW, /* 0x5a46 */ ZFS_IOC_POOL_SYNC, /* 0x5a47 */ ZFS_IOC_CHANNEL_PROGRAM, /* 0x5a48 */ ZFS_IOC_LOAD_KEY, /* 0x5a49 */ ZFS_IOC_UNLOAD_KEY, /* 0x5a4a */ ZFS_IOC_CHANGE_KEY, /* 0x5a4b */ ZFS_IOC_REMAP, /* 0x5a4c */ ZFS_IOC_POOL_CHECKPOINT, /* 0x5a4d */ ZFS_IOC_POOL_DISCARD_CHECKPOINT, /* 0x5a4e */ ZFS_IOC_POOL_INITIALIZE, /* 0x5a4f */ ZFS_IOC_POOL_TRIM, /* 0x5a50 */ ZFS_IOC_REDACT, /* 0x5a51 */ ZFS_IOC_GET_BOOKMARK_PROPS, /* 0x5a52 */ ZFS_IOC_WAIT, /* 0x5a53 */ ZFS_IOC_WAIT_FS, /* 0x5a54 */ /* * Per-platform (Optional) - 8/128 numbers reserved. */ ZFS_IOC_PLATFORM = ZFS_IOC_FIRST + 0x80, ZFS_IOC_EVENTS_NEXT, /* 0x81 (Linux) */ ZFS_IOC_EVENTS_CLEAR, /* 0x82 (Linux) */ ZFS_IOC_EVENTS_SEEK, /* 0x83 (Linux) */ ZFS_IOC_NEXTBOOT, /* 0x84 (FreeBSD) */ ZFS_IOC_JAIL, /* 0x85 (FreeBSD) */ ZFS_IOC_UNJAIL, /* 0x86 (FreeBSD) */ ZFS_IOC_SET_BOOTENV, /* 0x87 */ ZFS_IOC_GET_BOOTENV, /* 0x88 */ ZFS_IOC_LAST } zfs_ioc_t; /* * zvol ioctl to get dataset name */ #define BLKZNAME _IOR(0x12, 125, char[ZFS_MAX_DATASET_NAME_LEN]) /* * ZFS-specific error codes used for returning descriptive errors * to the userland through zfs ioctls. * * The enum implicitly includes all the error codes from errno.h. * New code should use and extend this enum for errors that are * not described precisely by generic errno codes. * * These numbers should not change over time. New entries should be appended. * * (Keep in sync with contrib/pyzfs/libzfs_core/_constants.py) */ typedef enum { ZFS_ERR_CHECKPOINT_EXISTS = 1024, ZFS_ERR_DISCARDING_CHECKPOINT, ZFS_ERR_NO_CHECKPOINT, ZFS_ERR_DEVRM_IN_PROGRESS, ZFS_ERR_VDEV_TOO_BIG, ZFS_ERR_IOC_CMD_UNAVAIL, ZFS_ERR_IOC_ARG_UNAVAIL, ZFS_ERR_IOC_ARG_REQUIRED, ZFS_ERR_IOC_ARG_BADTYPE, ZFS_ERR_WRONG_PARENT, ZFS_ERR_FROM_IVSET_GUID_MISSING, ZFS_ERR_FROM_IVSET_GUID_MISMATCH, ZFS_ERR_SPILL_BLOCK_FLAG_MISSING, ZFS_ERR_UNKNOWN_SEND_STREAM_FEATURE, ZFS_ERR_EXPORT_IN_PROGRESS, ZFS_ERR_BOOKMARK_SOURCE_NOT_ANCESTOR, ZFS_ERR_STREAM_TRUNCATED, ZFS_ERR_STREAM_LARGE_BLOCK_MISMATCH, ZFS_ERR_RESILVER_IN_PROGRESS, ZFS_ERR_REBUILD_IN_PROGRESS, ZFS_ERR_BADPROP, } zfs_errno_t; /* * Internal SPA load state. Used by FMA diagnosis engine. */ typedef enum { SPA_LOAD_NONE, /* no load in progress */ SPA_LOAD_OPEN, /* normal open */ SPA_LOAD_IMPORT, /* import in progress */ SPA_LOAD_TRYIMPORT, /* tryimport in progress */ SPA_LOAD_RECOVER, /* recovery requested */ SPA_LOAD_ERROR, /* load failed */ SPA_LOAD_CREATE /* creation in progress */ } spa_load_state_t; typedef enum { ZPOOL_WAIT_CKPT_DISCARD, ZPOOL_WAIT_FREE, ZPOOL_WAIT_INITIALIZE, ZPOOL_WAIT_REPLACE, ZPOOL_WAIT_REMOVE, ZPOOL_WAIT_RESILVER, ZPOOL_WAIT_SCRUB, ZPOOL_WAIT_TRIM, ZPOOL_WAIT_NUM_ACTIVITIES } zpool_wait_activity_t; typedef enum { ZFS_WAIT_DELETEQ, ZFS_WAIT_NUM_ACTIVITIES } zfs_wait_activity_t; /* * Bookmark name values. */ #define ZPOOL_ERR_LIST "error list" #define ZPOOL_ERR_DATASET "dataset" #define ZPOOL_ERR_OBJECT "object" #define HIS_MAX_RECORD_LEN (MAXPATHLEN + MAXPATHLEN + 1) /* * The following are names used in the nvlist describing * the pool's history log. */ #define ZPOOL_HIST_RECORD "history record" #define ZPOOL_HIST_TIME "history time" #define ZPOOL_HIST_CMD "history command" #define ZPOOL_HIST_WHO "history who" #define ZPOOL_HIST_ZONE "history zone" #define ZPOOL_HIST_HOST "history hostname" #define ZPOOL_HIST_TXG "history txg" #define ZPOOL_HIST_INT_EVENT "history internal event" #define ZPOOL_HIST_INT_STR "history internal str" #define ZPOOL_HIST_INT_NAME "internal_name" #define ZPOOL_HIST_IOCTL "ioctl" #define ZPOOL_HIST_INPUT_NVL "in_nvl" #define ZPOOL_HIST_OUTPUT_NVL "out_nvl" #define ZPOOL_HIST_OUTPUT_SIZE "out_size" #define ZPOOL_HIST_DSNAME "dsname" #define ZPOOL_HIST_DSID "dsid" #define ZPOOL_HIST_ERRNO "errno" /* * Special nvlist name that will not have its args recorded in the pool's * history log. */ #define ZPOOL_HIDDEN_ARGS "hidden_args" /* * The following are names used when invoking ZFS_IOC_POOL_INITIALIZE. */ #define ZPOOL_INITIALIZE_COMMAND "initialize_command" #define ZPOOL_INITIALIZE_VDEVS "initialize_vdevs" /* * The following are names used when invoking ZFS_IOC_POOL_TRIM. */ #define ZPOOL_TRIM_COMMAND "trim_command" #define ZPOOL_TRIM_VDEVS "trim_vdevs" #define ZPOOL_TRIM_RATE "trim_rate" #define ZPOOL_TRIM_SECURE "trim_secure" /* * The following are names used when invoking ZFS_IOC_POOL_WAIT. */ #define ZPOOL_WAIT_ACTIVITY "wait_activity" #define ZPOOL_WAIT_TAG "wait_tag" #define ZPOOL_WAIT_WAITED "wait_waited" /* * The following are names used when invoking ZFS_IOC_WAIT_FS. */ #define ZFS_WAIT_ACTIVITY "wait_activity" #define ZFS_WAIT_WAITED "wait_waited" /* * Flags for ZFS_IOC_VDEV_SET_STATE */ #define ZFS_ONLINE_CHECKREMOVE 0x1 #define ZFS_ONLINE_UNSPARE 0x2 #define ZFS_ONLINE_FORCEFAULT 0x4 #define ZFS_ONLINE_EXPAND 0x8 #define ZFS_OFFLINE_TEMPORARY 0x1 /* * Flags for ZFS_IOC_POOL_IMPORT */ #define ZFS_IMPORT_NORMAL 0x0 #define ZFS_IMPORT_VERBATIM 0x1 #define ZFS_IMPORT_ANY_HOST 0x2 #define ZFS_IMPORT_MISSING_LOG 0x4 #define ZFS_IMPORT_ONLY 0x8 #define ZFS_IMPORT_TEMP_NAME 0x10 #define ZFS_IMPORT_SKIP_MMP 0x20 #define ZFS_IMPORT_LOAD_KEYS 0x40 #define ZFS_IMPORT_CHECKPOINT 0x80 /* * Channel program argument/return nvlist keys and defaults. */ #define ZCP_ARG_PROGRAM "program" #define ZCP_ARG_ARGLIST "arg" #define ZCP_ARG_SYNC "sync" #define ZCP_ARG_INSTRLIMIT "instrlimit" #define ZCP_ARG_MEMLIMIT "memlimit" #define ZCP_ARG_CLIARGV "argv" #define ZCP_RET_ERROR "error" #define ZCP_RET_RETURN "return" #define ZCP_DEFAULT_INSTRLIMIT (10 * 1000 * 1000) #define ZCP_MAX_INSTRLIMIT (10 * ZCP_DEFAULT_INSTRLIMIT) #define ZCP_DEFAULT_MEMLIMIT (10 * 1024 * 1024) #define ZCP_MAX_MEMLIMIT (10 * ZCP_DEFAULT_MEMLIMIT) /* * Sysevent payload members. ZFS will generate the following sysevents with the * given payloads: * * ESC_ZFS_RESILVER_START * ESC_ZFS_RESILVER_FINISH * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_RESILVER_TYPE DATA_TYPE_STRING * * ESC_ZFS_POOL_DESTROY * ESC_ZFS_POOL_REGUID * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * * ESC_ZFS_VDEV_REMOVE * ESC_ZFS_VDEV_CLEAR * ESC_ZFS_VDEV_CHECK * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_VDEV_PATH DATA_TYPE_STRING (optional) * ZFS_EV_VDEV_GUID DATA_TYPE_UINT64 * * ESC_ZFS_HISTORY_EVENT * * ZFS_EV_POOL_NAME DATA_TYPE_STRING * ZFS_EV_POOL_GUID DATA_TYPE_UINT64 * ZFS_EV_HIST_TIME DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_CMD DATA_TYPE_STRING (optional) * ZFS_EV_HIST_WHO DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_ZONE DATA_TYPE_STRING (optional) * ZFS_EV_HIST_HOST DATA_TYPE_STRING (optional) * ZFS_EV_HIST_TXG DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_INT_EVENT DATA_TYPE_UINT64 (optional) * ZFS_EV_HIST_INT_STR DATA_TYPE_STRING (optional) * ZFS_EV_HIST_INT_NAME DATA_TYPE_STRING (optional) * ZFS_EV_HIST_IOCTL DATA_TYPE_STRING (optional) * ZFS_EV_HIST_DSNAME DATA_TYPE_STRING (optional) * ZFS_EV_HIST_DSID DATA_TYPE_UINT64 (optional) * * The ZFS_EV_HIST_* members will correspond to the ZPOOL_HIST_* members in the * history log nvlist. The keynames will be free of any spaces or other * characters that could be potentially unexpected to consumers of the * sysevents. */ #define ZFS_EV_POOL_NAME "pool_name" #define ZFS_EV_POOL_GUID "pool_guid" #define ZFS_EV_VDEV_PATH "vdev_path" #define ZFS_EV_VDEV_GUID "vdev_guid" #define ZFS_EV_HIST_TIME "history_time" #define ZFS_EV_HIST_CMD "history_command" #define ZFS_EV_HIST_WHO "history_who" #define ZFS_EV_HIST_ZONE "history_zone" #define ZFS_EV_HIST_HOST "history_hostname" #define ZFS_EV_HIST_TXG "history_txg" #define ZFS_EV_HIST_INT_EVENT "history_internal_event" #define ZFS_EV_HIST_INT_STR "history_internal_str" #define ZFS_EV_HIST_INT_NAME "history_internal_name" #define ZFS_EV_HIST_IOCTL "history_ioctl" #define ZFS_EV_HIST_DSNAME "history_dsname" #define ZFS_EV_HIST_DSID "history_dsid" #define ZFS_EV_RESILVER_TYPE "resilver_type" #ifdef __cplusplus } #endif #endif /* _SYS_FS_ZFS_H */