/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2010 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ /* * Copyright (c) 2012, 2018 by Delphix. All rights reserved. */ /* * This file contains the code to implement file range locking in * ZFS, although there isn't much specific to ZFS (all that comes to mind is * support for growing the blocksize). * * Interface * --------- * Defined in zfs_rlock.h but essentially: * lr = rangelock_enter(zp, off, len, lock_type); * rangelock_reduce(lr, off, len); // optional * rangelock_exit(lr); * * AVL tree * -------- * An AVL tree is used to maintain the state of the existing ranges * that are locked for exclusive (writer) or shared (reader) use. * The starting range offset is used for searching and sorting the tree. * * Common case * ----------- * The (hopefully) usual case is of no overlaps or contention for locks. On * entry to rangelock_enter(), a locked_range_t is allocated; the tree * searched that finds no overlap, and *this* locked_range_t is placed in the * tree. * * Overlaps/Reference counting/Proxy locks * --------------------------------------- * The avl code only allows one node at a particular offset. Also it's very * inefficient to search through all previous entries looking for overlaps * (because the very 1st in the ordered list might be at offset 0 but * cover the whole file). * So this implementation uses reference counts and proxy range locks. * Firstly, only reader locks use reference counts and proxy locks, * because writer locks are exclusive. * When a reader lock overlaps with another then a proxy lock is created * for that range and replaces the original lock. If the overlap * is exact then the reference count of the proxy is simply incremented. * Otherwise, the proxy lock is split into smaller lock ranges and * new proxy locks created for non overlapping ranges. * The reference counts are adjusted accordingly. * Meanwhile, the original lock is kept around (this is the callers handle) * and its offset and length are used when releasing the lock. * * Thread coordination * ------------------- * In order to make wakeups efficient and to ensure multiple continuous * readers on a range don't starve a writer for the same range lock, * two condition variables are allocated in each rl_t. * If a writer (or reader) can't get a range it initialises the writer * (or reader) cv; sets a flag saying there's a writer (or reader) waiting; * and waits on that cv. When a thread unlocks that range it wakes up all * writers then all readers before destroying the lock. * * Append mode writes * ------------------ * Append mode writes need to lock a range at the end of a file. * The offset of the end of the file is determined under the * range locking mutex, and the lock type converted from RL_APPEND to * RL_WRITER and the range locked. * * Grow block handling * ------------------- * ZFS supports multiple block sizes, up to 16MB. The smallest * block size is used for the file which is grown as needed. During this * growth all other writers and readers must be excluded. * So if the block size needs to be grown then the whole file is * exclusively locked, then later the caller will reduce the lock * range to just the range to be written using rangelock_reduce(). */ #include #include /* * AVL comparison function used to order range locks * Locks are ordered on the start offset of the range. */ static int zfs_rangelock_compare(const void *arg1, const void *arg2) { const locked_range_t *rl1 = (const locked_range_t *)arg1; const locked_range_t *rl2 = (const locked_range_t *)arg2; return (TREE_CMP(rl1->lr_offset, rl2->lr_offset)); } /* * The callback is invoked when acquiring a RL_WRITER or RL_APPEND lock. * It must convert RL_APPEND to RL_WRITER (starting at the end of the file), * and may increase the range that's locked for RL_WRITER. */ void zfs_rangelock_init(rangelock_t *rl, rangelock_cb_t *cb, void *arg) { mutex_init(&rl->rl_lock, NULL, MUTEX_DEFAULT, NULL); avl_create(&rl->rl_tree, zfs_rangelock_compare, sizeof (locked_range_t), offsetof(locked_range_t, lr_node)); rl->rl_cb = cb; rl->rl_arg = arg; } void zfs_rangelock_fini(rangelock_t *rl) { mutex_destroy(&rl->rl_lock); avl_destroy(&rl->rl_tree); } /* * Check if a write lock can be grabbed, or wait and recheck until available. */ static void zfs_rangelock_enter_writer(rangelock_t *rl, locked_range_t *new) { avl_tree_t *tree = &rl->rl_tree; locked_range_t *lr; avl_index_t where; uint64_t orig_off = new->lr_offset; uint64_t orig_len = new->lr_length; rangelock_type_t orig_type = new->lr_type; for (;;) { /* * Call callback which can modify new->r_off,len,type. * Note, the callback is used by the ZPL to handle appending * and changing blocksizes. It isn't needed for zvols. */ if (rl->rl_cb != NULL) { rl->rl_cb(new, rl->rl_arg); } /* * If the type was APPEND, the callback must convert it to * WRITER. */ ASSERT3U(new->lr_type, ==, RL_WRITER); /* * First check for the usual case of no locks */ if (avl_numnodes(tree) == 0) { avl_add(tree, new); return; } /* * Look for any locks in the range. */ lr = avl_find(tree, new, &where); if (lr != NULL) goto wait; /* already locked at same offset */ lr = (locked_range_t *)avl_nearest(tree, where, AVL_AFTER); if (lr != NULL && lr->lr_offset < new->lr_offset + new->lr_length) goto wait; lr = (locked_range_t *)avl_nearest(tree, where, AVL_BEFORE); if (lr != NULL && lr->lr_offset + lr->lr_length > new->lr_offset) goto wait; avl_insert(tree, new, where); return; wait: if (!lr->lr_write_wanted) { cv_init(&lr->lr_write_cv, NULL, CV_DEFAULT, NULL); lr->lr_write_wanted = B_TRUE; } cv_wait(&lr->lr_write_cv, &rl->rl_lock); /* reset to original */ new->lr_offset = orig_off; new->lr_length = orig_len; new->lr_type = orig_type; } } /* * If this is an original (non-proxy) lock then replace it by * a proxy and return the proxy. */ static locked_range_t * zfs_rangelock_proxify(avl_tree_t *tree, locked_range_t *lr) { locked_range_t *proxy; if (lr->lr_proxy) return (lr); /* already a proxy */ ASSERT3U(lr->lr_count, ==, 1); ASSERT(lr->lr_write_wanted == B_FALSE); ASSERT(lr->lr_read_wanted == B_FALSE); avl_remove(tree, lr); lr->lr_count = 0; /* create a proxy range lock */ proxy = kmem_alloc(sizeof (locked_range_t), KM_SLEEP); proxy->lr_offset = lr->lr_offset; proxy->lr_length = lr->lr_length; proxy->lr_count = 1; proxy->lr_type = RL_READER; proxy->lr_proxy = B_TRUE; proxy->lr_write_wanted = B_FALSE; proxy->lr_read_wanted = B_FALSE; avl_add(tree, proxy); return (proxy); } /* * Split the range lock at the supplied offset * returning the *front* proxy. */ static locked_range_t * zfs_rangelock_split(avl_tree_t *tree, locked_range_t *lr, uint64_t off) { ASSERT3U(lr->lr_length, >, 1); ASSERT3U(off, >, lr->lr_offset); ASSERT3U(off, <, lr->lr_offset + lr->lr_length); ASSERT(lr->lr_write_wanted == B_FALSE); ASSERT(lr->lr_read_wanted == B_FALSE); /* create the rear proxy range lock */ locked_range_t *rear = kmem_alloc(sizeof (locked_range_t), KM_SLEEP); rear->lr_offset = off; rear->lr_length = lr->lr_offset + lr->lr_length - off; rear->lr_count = lr->lr_count; rear->lr_type = RL_READER; rear->lr_proxy = B_TRUE; rear->lr_write_wanted = B_FALSE; rear->lr_read_wanted = B_FALSE; locked_range_t *front = zfs_rangelock_proxify(tree, lr); front->lr_length = off - lr->lr_offset; avl_insert_here(tree, rear, front, AVL_AFTER); return (front); } /* * Create and add a new proxy range lock for the supplied range. */ static void zfs_rangelock_new_proxy(avl_tree_t *tree, uint64_t off, uint64_t len) { ASSERT(len != 0); locked_range_t *lr = kmem_alloc(sizeof (locked_range_t), KM_SLEEP); lr->lr_offset = off; lr->lr_length = len; lr->lr_count = 1; lr->lr_type = RL_READER; lr->lr_proxy = B_TRUE; lr->lr_write_wanted = B_FALSE; lr->lr_read_wanted = B_FALSE; avl_add(tree, lr); } static void zfs_rangelock_add_reader(avl_tree_t *tree, locked_range_t *new, locked_range_t *prev, avl_index_t where) { locked_range_t *next; uint64_t off = new->lr_offset; uint64_t len = new->lr_length; /* * prev arrives either: * - pointing to an entry at the same offset * - pointing to the entry with the closest previous offset whose * range may overlap with the new range * - null, if there were no ranges starting before the new one */ if (prev != NULL) { if (prev->lr_offset + prev->lr_length <= off) { prev = NULL; } else if (prev->lr_offset != off) { /* * convert to proxy if needed then * split this entry and bump ref count */ prev = zfs_rangelock_split(tree, prev, off); prev = AVL_NEXT(tree, prev); /* move to rear range */ } } ASSERT((prev == NULL) || (prev->lr_offset == off)); if (prev != NULL) next = prev; else next = avl_nearest(tree, where, AVL_AFTER); if (next == NULL || off + len <= next->lr_offset) { /* no overlaps, use the original new rl_t in the tree */ avl_insert(tree, new, where); return; } if (off < next->lr_offset) { /* Add a proxy for initial range before the overlap */ zfs_rangelock_new_proxy(tree, off, next->lr_offset - off); } new->lr_count = 0; /* will use proxies in tree */ /* * We now search forward through the ranges, until we go past the end * of the new range. For each entry we make it a proxy if it * isn't already, then bump its reference count. If there's any * gaps between the ranges then we create a new proxy range. */ for (prev = NULL; next; prev = next, next = AVL_NEXT(tree, next)) { if (off + len <= next->lr_offset) break; if (prev != NULL && prev->lr_offset + prev->lr_length < next->lr_offset) { /* there's a gap */ ASSERT3U(next->lr_offset, >, prev->lr_offset + prev->lr_length); zfs_rangelock_new_proxy(tree, prev->lr_offset + prev->lr_length, next->lr_offset - (prev->lr_offset + prev->lr_length)); } if (off + len == next->lr_offset + next->lr_length) { /* exact overlap with end */ next = zfs_rangelock_proxify(tree, next); next->lr_count++; return; } if (off + len < next->lr_offset + next->lr_length) { /* new range ends in the middle of this block */ next = zfs_rangelock_split(tree, next, off + len); next->lr_count++; return; } ASSERT3U(off + len, >, next->lr_offset + next->lr_length); next = zfs_rangelock_proxify(tree, next); next->lr_count++; } /* Add the remaining end range. */ zfs_rangelock_new_proxy(tree, prev->lr_offset + prev->lr_length, (off + len) - (prev->lr_offset + prev->lr_length)); } /* * Check if a reader lock can be grabbed, or wait and recheck until available. */ static void zfs_rangelock_enter_reader(rangelock_t *rl, locked_range_t *new) { avl_tree_t *tree = &rl->rl_tree; locked_range_t *prev, *next; avl_index_t where; uint64_t off = new->lr_offset; uint64_t len = new->lr_length; /* * Look for any writer locks in the range. */ retry: prev = avl_find(tree, new, &where); if (prev == NULL) prev = (locked_range_t *)avl_nearest(tree, where, AVL_BEFORE); /* * Check the previous range for a writer lock overlap. */ if (prev && (off < prev->lr_offset + prev->lr_length)) { if ((prev->lr_type == RL_WRITER) || (prev->lr_write_wanted)) { if (!prev->lr_read_wanted) { cv_init(&prev->lr_read_cv, NULL, CV_DEFAULT, NULL); prev->lr_read_wanted = B_TRUE; } cv_wait(&prev->lr_read_cv, &rl->rl_lock); goto retry; } if (off + len < prev->lr_offset + prev->lr_length) goto got_lock; } /* * Search through the following ranges to see if there's * write lock any overlap. */ if (prev != NULL) next = AVL_NEXT(tree, prev); else next = (locked_range_t *)avl_nearest(tree, where, AVL_AFTER); for (; next != NULL; next = AVL_NEXT(tree, next)) { if (off + len <= next->lr_offset) goto got_lock; if ((next->lr_type == RL_WRITER) || (next->lr_write_wanted)) { if (!next->lr_read_wanted) { cv_init(&next->lr_read_cv, NULL, CV_DEFAULT, NULL); next->lr_read_wanted = B_TRUE; } cv_wait(&next->lr_read_cv, &rl->rl_lock); goto retry; } if (off + len <= next->lr_offset + next->lr_length) goto got_lock; } got_lock: /* * Add the read lock, which may involve splitting existing * locks and bumping ref counts (r_count). */ zfs_rangelock_add_reader(tree, new, prev, where); } /* * Lock a range (offset, length) as either shared (RL_READER) or exclusive * (RL_WRITER or RL_APPEND). If RL_APPEND is specified, rl_cb() will convert * it to a RL_WRITER lock (with the offset at the end of the file). Returns * the range lock structure for later unlocking (or reduce range if the * entire file is locked as RL_WRITER). */ locked_range_t * zfs_rangelock_enter(rangelock_t *rl, uint64_t off, uint64_t len, rangelock_type_t type) { ASSERT(type == RL_READER || type == RL_WRITER || type == RL_APPEND); locked_range_t *new = kmem_alloc(sizeof (locked_range_t), KM_SLEEP); new->lr_rangelock = rl; new->lr_offset = off; if (len + off < off) /* overflow */ len = UINT64_MAX - off; new->lr_length = len; new->lr_count = 1; /* assume it's going to be in the tree */ new->lr_type = type; new->lr_proxy = B_FALSE; new->lr_write_wanted = B_FALSE; new->lr_read_wanted = B_FALSE; mutex_enter(&rl->rl_lock); if (type == RL_READER) { /* * First check for the usual case of no locks */ if (avl_numnodes(&rl->rl_tree) == 0) avl_add(&rl->rl_tree, new); else zfs_rangelock_enter_reader(rl, new); } else { /* RL_WRITER or RL_APPEND */ zfs_rangelock_enter_writer(rl, new); } mutex_exit(&rl->rl_lock); return (new); } /* * Safely free the locked_range_t. */ static void zfs_rangelock_free(locked_range_t *lr) { if (lr->lr_write_wanted) cv_destroy(&lr->lr_write_cv); if (lr->lr_read_wanted) cv_destroy(&lr->lr_read_cv); kmem_free(lr, sizeof (locked_range_t)); } /* * Unlock a reader lock */ static void zfs_rangelock_exit_reader(rangelock_t *rl, locked_range_t *remove, list_t *free_list) { avl_tree_t *tree = &rl->rl_tree; uint64_t len; /* * The common case is when the remove entry is in the tree * (cnt == 1) meaning there's been no other reader locks overlapping * with this one. Otherwise the remove entry will have been * removed from the tree and replaced by proxies (one or * more ranges mapping to the entire range). */ if (remove->lr_count == 1) { avl_remove(tree, remove); if (remove->lr_write_wanted) cv_broadcast(&remove->lr_write_cv); if (remove->lr_read_wanted) cv_broadcast(&remove->lr_read_cv); list_insert_tail(free_list, remove); } else { ASSERT0(remove->lr_count); ASSERT0(remove->lr_write_wanted); ASSERT0(remove->lr_read_wanted); /* * Find start proxy representing this reader lock, * then decrement ref count on all proxies * that make up this range, freeing them as needed. */ locked_range_t *lr = avl_find(tree, remove, NULL); ASSERT3P(lr, !=, NULL); ASSERT3U(lr->lr_count, !=, 0); ASSERT3U(lr->lr_type, ==, RL_READER); locked_range_t *next = NULL; for (len = remove->lr_length; len != 0; lr = next) { len -= lr->lr_length; if (len != 0) { next = AVL_NEXT(tree, lr); ASSERT3P(next, !=, NULL); ASSERT3U(lr->lr_offset + lr->lr_length, ==, next->lr_offset); ASSERT3U(next->lr_count, !=, 0); ASSERT3U(next->lr_type, ==, RL_READER); } lr->lr_count--; if (lr->lr_count == 0) { avl_remove(tree, lr); if (lr->lr_write_wanted) cv_broadcast(&lr->lr_write_cv); if (lr->lr_read_wanted) cv_broadcast(&lr->lr_read_cv); list_insert_tail(free_list, lr); } } kmem_free(remove, sizeof (locked_range_t)); } } /* * Unlock range and destroy range lock structure. */ void zfs_rangelock_exit(locked_range_t *lr) { rangelock_t *rl = lr->lr_rangelock; list_t free_list; locked_range_t *free_lr; ASSERT(lr->lr_type == RL_WRITER || lr->lr_type == RL_READER); ASSERT(lr->lr_count == 1 || lr->lr_count == 0); ASSERT(!lr->lr_proxy); /* * The free list is used to defer the cv_destroy() and * subsequent kmem_free until after the mutex is dropped. */ list_create(&free_list, sizeof (locked_range_t), offsetof(locked_range_t, lr_node)); mutex_enter(&rl->rl_lock); if (lr->lr_type == RL_WRITER) { /* writer locks can't be shared or split */ avl_remove(&rl->rl_tree, lr); if (lr->lr_write_wanted) cv_broadcast(&lr->lr_write_cv); if (lr->lr_read_wanted) cv_broadcast(&lr->lr_read_cv); list_insert_tail(&free_list, lr); } else { /* * lock may be shared, let rangelock_exit_reader() * release the lock and free the locked_range_t. */ zfs_rangelock_exit_reader(rl, lr, &free_list); } mutex_exit(&rl->rl_lock); while ((free_lr = list_remove_head(&free_list)) != NULL) zfs_rangelock_free(free_lr); list_destroy(&free_list); } /* * Reduce range locked as RL_WRITER from whole file to specified range. * Asserts the whole file is exclusively locked and so there's only one * entry in the tree. */ void zfs_rangelock_reduce(locked_range_t *lr, uint64_t off, uint64_t len) { rangelock_t *rl = lr->lr_rangelock; /* Ensure there are no other locks */ ASSERT3U(avl_numnodes(&rl->rl_tree), ==, 1); ASSERT3U(lr->lr_offset, ==, 0); ASSERT3U(lr->lr_type, ==, RL_WRITER); ASSERT(!lr->lr_proxy); ASSERT3U(lr->lr_length, ==, UINT64_MAX); ASSERT3U(lr->lr_count, ==, 1); mutex_enter(&rl->rl_lock); lr->lr_offset = off; lr->lr_length = len; mutex_exit(&rl->rl_lock); if (lr->lr_write_wanted) cv_broadcast(&lr->lr_write_cv); if (lr->lr_read_wanted) cv_broadcast(&lr->lr_read_cv); } #if defined(_KERNEL) EXPORT_SYMBOL(zfs_rangelock_init); EXPORT_SYMBOL(zfs_rangelock_fini); EXPORT_SYMBOL(zfs_rangelock_enter); EXPORT_SYMBOL(zfs_rangelock_exit); EXPORT_SYMBOL(zfs_rangelock_reduce); #endif