# ZFS Test Suite README 1) Building and installing the ZFS Test Suite The ZFS Test Suite runs under the test-runner framework. This framework is built along side the standard ZFS utilities and is included as part of zfs-test package. The zfs-test package can be built from source as follows: $ ./configure $ make pkg-utils The resulting packages can be installed using the rpm or dpkg command as appropriate for your distributions. Alternately, if you have installed ZFS from a distributions repository (not from source) the zfs-test package may be provided for your distribution. - Installed from source $ rpm -ivh ./zfs-test*.rpm, or $ dpkg -i ./zfs-test*.deb, - Installed from package repository $ yum install zfs-test $ apt-get install zfs-test 2) Running the ZFS Test Suite The pre-requisites for running the ZFS Test Suite are: * Three scratch disks * Specify the disks you wish to use in the $DISKS variable, as a space delimited list like this: DISKS='vdb vdc vdd'. By default the zfs-tests.sh sciprt will construct three loopback devices to be used for testing: DISKS='loop0 loop1 loop2'. * A non-root user with a full set of basic privileges and the ability to sudo(8) to root without a password to run the test. * Specify any pools you wish to preserve as a space delimited list in the $KEEP variable. All pools detected at the start of testing are added automatically. * The ZFS Test Suite will add users and groups to test machine to verify functionality. Therefore it is strongly advised that a dedicated test machine, which can be a VM, be used for testing. Once the pre-requisites are satisfied simply run the zfs-tests.sh script: $ /usr/share/zfs/zfs-tests.sh Alternately, the zfs-tests.sh script can be run from the source tree to allow developers to rapidly validate their work. In this mode the ZFS utilities and modules from the source tree will be used (rather than those installed on the system). In order to avoid certain types of failures you will need to ensure the ZFS udev rules are installed. This can be done manually or by ensuring some version of ZFS is installed on the system. $ ./scripts/zfs-tests.sh The following zfs-tests.sh options are supported: -v Verbose zfs-tests.sh output When specified additional information describing the test environment will be logged prior to invoking test-runner. This includes the runfile being used, the DISKS targeted, pools to keep, etc. -q Quiet test-runner output. When specified it is passed to test-runner(1) which causes output to be written to the console only for tests that do not pass and the results summary. -x Remove all testpools, dm, lo, and files (unsafe). When specified the script will attempt to remove any leftover configuration from a previous test run. This includes destroying any pools named testpool, unused DM devices, and loopback devices backed by file-vdevs. This operation can be DANGEROUS because it is possible that the script will mistakenly remove a resource not related to the testing. -k Disable cleanup after test failure. When specified the zfs-tests.sh script will not perform any additional cleanup when test-runner exists. This is useful when the results of a specific test need to be preserved for further analysis. -f Use sparse files directly instead of loopback devices for the testing. When running in this mode certain tests will be skipped which depend on real block devices. -c Only create and populate constrained path -I NUM Number of iterations -d DIR Create sparse files for vdevs in the DIR directory. By default these files are created under /var/tmp/. -s SIZE Use vdevs of SIZE (default: 4G) -r RUNFILES Run tests in RUNFILES (default: common.run,linux.run) -t PATH Run single test at PATH relative to test suite -T TAGS Comma separated list of tags (default: 'functional') -u USER Run single test as USER (default: root) The ZFS Test Suite allows the user to specify a subset of the tests via a runfile or list of tags. The format of the runfile is explained in test-runner(1), and the files that zfs-tests.sh uses are available for reference under /usr/share/zfs/runfiles. To specify a custom runfile, use the -r option: $ /usr/share/zfs/zfs-tests.sh -r my_tests.run Otherwise user can set needed tags to run only specific tests. 3) Test results While the ZFS Test Suite is running, one informational line is printed at the end of each test, and a results summary is printed at the end of the run. The results summary includes the location of the complete logs, which is logged in the form `/var/tmp/test_results/[ISO 8601 date]`. A normal test run launched with the `zfs-tests.sh` wrapper script will look something like this: $ /usr/share/zfs/zfs-tests.sh -v -d /tmp/test --- Configuration --- Runfile: /usr/share/zfs/runfiles/linux.run STF_TOOLS: /usr/share/zfs/test-runner STF_SUITE: /usr/share/zfs/zfs-tests STF_PATH: /var/tmp/constrained_path.G0Sf FILEDIR: /tmp/test FILES: /tmp/test/file-vdev0 /tmp/test/file-vdev1 /tmp/test/file-vdev2 LOOPBACKS: /dev/loop0 /dev/loop1 /dev/loop2 DISKS: loop0 loop1 loop2 NUM_DISKS: 3 FILESIZE: 4G ITERATIONS: 1 TAGS: functional Keep pool(s): rpool /usr/share/zfs/test-runner/bin/test-runner.py -c /usr/share/zfs/runfiles/linux.run \ -T functional -i /usr/share/zfs/zfs-tests -I 1 Test: /usr/share/zfs/zfs-tests/tests/functional/arc/setup (run as root) [00:00] [PASS] ...more than 1100 additional tests... Test: /usr/share/zfs/zfs-tests/tests/functional/zvol/zvol_swap/cleanup (run as root) [00:00] [PASS] Results Summary SKIP 52 PASS 1129 Running Time: 02:35:33 Percent passed: 95.6% Log directory: /var/tmp/test_results/20180515T054509