.\"
.\" CDDL HEADER START
.\"
.\" The contents of this file are subject to the terms of the
.\" Common Development and Distribution License (the "License").
.\" You may not use this file except in compliance with the License.
.\"
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
.\" or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions
.\" and limitations under the License.
.\"
.\" When distributing Covered Code, include this CDDL HEADER in each
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
.\" If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying
.\" information: Portions Copyright [yyyy] [name of copyright owner]
.\"
.\" CDDL HEADER END
.\"
.\"
.\" Copyright (c) 2007, Sun Microsystems, Inc. All Rights Reserved.
.\" Copyright (c) 2012, 2018 by Delphix. All rights reserved.
.\" Copyright (c) 2012 Cyril Plisko. All Rights Reserved.
.\" Copyright (c) 2017 Datto Inc.
.\" Copyright (c) 2018 George Melikov. All Rights Reserved.
.\" Copyright 2017 Nexenta Systems, Inc.
.\" Copyright (c) 2017 Open-E, Inc. All Rights Reserved.
.\" Copyright (c) 2021, Colm Buckley <colm@tuatha.org>
.\"
.Dd August 9, 2019
.Dt ZPOOL-CREATE 8
.Os
.Sh NAME
.Nm zpool-create
.Nd Creates a new ZFS storage pool
.Sh SYNOPSIS
.Nm zpool
.Cm create
.Op Fl dfn
.Op Fl m Ar mountpoint
.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
.Oo Fl o Ar feature@feature Ns = Ns Ar value Oc
.Op Fl o Ar compatibility Ns = Ns Ar off | legacy | file Bq , Ns Ar file Ns ...
.Oo Fl O Ar file-system-property Ns = Ns Ar value Oc Ns ...
.Op Fl R Ar root
.Ar pool vdev Ns ...
.Sh DESCRIPTION
.Bl -tag -width Ds
.It Xo
.Nm zpool
.Cm create
.Op Fl dfn
.Op Fl m Ar mountpoint
.Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
.Oo Fl o Ar feature@feature Ns = Ns Ar value Oc Ns ...
.Op Fl o Ar compatibility Ns = Ns Ar off | legacy | file Bq , Ns Ar file Ns ...
.Oo Fl O Ar file-system-property Ns = Ns Ar value Oc Ns ...
.Op Fl R Ar root
.Op Fl t Ar tname
.Ar pool vdev Ns ...
.Xc
Creates a new storage pool containing the virtual devices specified on the
command line.
The pool name must begin with a letter, and can only contain
alphanumeric characters as well as underscore
.Pq Qq Sy _ ,
dash
.Pq Qq Sy \&- ,
colon
.Pq Qq Sy \&: ,
space
.Pq Qq Sy \&\  ,
and period
.Pq Qq Sy \&. .
The pool names
.Sy mirror ,
.Sy raidz ,
.Sy draid ,
.Sy spare
and
.Sy log
are reserved, as are names beginning with
.Sy mirror ,
.Sy raidz ,
.Sy draid ,
.Sy spare ,
and the pattern
.Sy c[0-9] .
The
.Ar vdev
specification is described in the
.Em Virtual Devices
section of
.Xr zpoolconcepts 8 .
.Pp
The command attempts to verify that each device specified is accessible and not
currently in use by another subsystem.  However this check is not robust enough
to detect simultaneous attempts to use a new device in different pools, even if
.Sy multihost
is
.Sy enabled.
The
administrator must ensure that simultaneous invocations of any combination of
.Sy zpool replace ,
.Sy zpool create ,
.Sy zpool add ,
or
.Sy zpool labelclear ,
do not refer to the same device.  Using the same device in two pools will
result in pool corruption.
.Pp
There are some uses, such as being currently mounted, or specified as the
dedicated dump device, that prevents a device from ever being used by ZFS.
Other uses, such as having a preexisting UFS file system, can be overridden with
the
.Fl f
option.
.Pp
The command also checks that the replication strategy for the pool is
consistent.
An attempt to combine redundant and non-redundant storage in a single pool, or
to mix disks and files, results in an error unless
.Fl f
is specified.
The use of differently sized devices within a single raidz or mirror group is
also flagged as an error unless
.Fl f
is specified.
.Pp
Unless the
.Fl R
option is specified, the default mount point is
.Pa / Ns Ar pool .
The mount point must not exist or must be empty, or else the root dataset
cannot be mounted.
This can be overridden with the
.Fl m
option.
.Pp
By default all supported features are enabled on the new pool. The
.Fl d
option or the
.Fl o Ar compatibility
property (eg:
.Fl o Ar compatibility=2020
) can be used to restrict the features that are enabled, so that the
pool can be imported on other releases of the ZFS software.
.Bl -tag -width Ds
.It Fl d
Do not enable any features on the new pool.
Individual features can be enabled by setting their corresponding properties to
.Sy enabled
with the
.Fl o
option.
See
.Xr zpool-features 5
for details about feature properties.
.It Fl f
Forces use of
.Ar vdev Ns s ,
even if they appear in use or specify a conflicting replication level.
Not all devices can be overridden in this manner.
.It Fl m Ar mountpoint
Sets the mount point for the root dataset.
The default mount point is
.Pa /pool
or
.Pa altroot/pool
if
.Ar altroot
is specified.
The mount point must be an absolute path,
.Sy legacy ,
or
.Sy none .
For more information on dataset mount points, see
.Xr zfs 8 .
.It Fl n
Displays the configuration that would be used without actually creating the
pool.
The actual pool creation can still fail due to insufficient privileges or
device sharing.
.It Fl o Ar property Ns = Ns Ar value
Sets the given pool properties.
See the
.Xr zpoolprops 8
manual page for a list of valid properties that can be set.
.It Fl o Ar compatibility Ns = Ns Ar off | legacy | file Bq , Ns Ar file Ns ...
Specifies compatibility feature sets. See
.Xr zpool-features 5
for more information about compatibility feature sets.
.It Fl o Ar feature@feature Ns = Ns Ar value
Sets the given pool feature. See the
.Xr zpool-features 5
section for a list of valid features that can be set.
Value can be either disabled or enabled.
.It Fl O Ar file-system-property Ns = Ns Ar value
Sets the given file system properties in the root file system of the pool.
See the
.Xr zfsprops 8
manual page for a list of valid properties that can be set.
.It Fl R Ar root
Equivalent to
.Fl o Sy cachefile Ns = Ns Sy none Fl o Sy altroot Ns = Ns Ar root
.It Fl t Ar tname
Sets the in-core pool name to
.Sy tname
while the on-disk name will be the name specified as the pool name
.Sy pool .
This will set the default cachefile property to none. This is intended
to handle name space collisions when creating pools for other systems,
such as virtual machines or physical machines whose pools live on network
block devices.
.El
.El
.Sh SEE ALSO
.Xr zpool-destroy 8 ,
.Xr zpool-export 8 ,
.Xr zpool-import 8