/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright 2017 Nexenta Systems, Inc. */ #ifndef _SYS_ZAP_H #define _SYS_ZAP_H /* * ZAP - ZFS Attribute Processor * * The ZAP is a module which sits on top of the DMU (Data Management * Unit) and implements a higher-level storage primitive using DMU * objects. Its primary consumer is the ZPL (ZFS Posix Layer). * * A "zapobj" is a DMU object which the ZAP uses to stores attributes. * Users should use only zap routines to access a zapobj - they should * not access the DMU object directly using DMU routines. * * The attributes stored in a zapobj are name-value pairs. The name is * a zero-terminated string of up to ZAP_MAXNAMELEN bytes (including * terminating NULL). The value is an array of integers, which may be * 1, 2, 4, or 8 bytes long. The total space used by the array (number * of integers * integer length) can be up to ZAP_MAXVALUELEN bytes. * Note that an 8-byte integer value can be used to store the location * (object number) of another dmu object (which may be itself a zapobj). * Note that you can use a zero-length attribute to store a single bit * of information - the attribute is present or not. * * The ZAP routines are thread-safe. However, you must observe the * DMU's restriction that a transaction may not be operated on * concurrently. * * Any of the routines that return an int may return an I/O error (EIO * or ECHECKSUM). * * * Implementation / Performance Notes: * * The ZAP is intended to operate most efficiently on attributes with * short (49 bytes or less) names and single 8-byte values, for which * the microzap will be used. The ZAP should be efficient enough so * that the user does not need to cache these attributes. * * The ZAP's locking scheme makes its routines thread-safe. Operations * on different zapobjs will be processed concurrently. Operations on * the same zapobj which only read data will be processed concurrently. * Operations on the same zapobj which modify data will be processed * concurrently when there are many attributes in the zapobj (because * the ZAP uses per-block locking - more than 128 * (number of cpus) * small attributes will suffice). */ /* * We're using zero-terminated byte strings (ie. ASCII or UTF-8 C * strings) for the names of attributes, rather than a byte string * bounded by an explicit length. If some day we want to support names * in character sets which have embedded zeros (eg. UTF-16, UTF-32), * we'll have to add routines for using length-bounded strings. */ #include #ifdef __cplusplus extern "C" { #endif /* * Specifies matching criteria for ZAP lookups. * MT_NORMALIZE Use ZAP normalization flags, which can include both * unicode normalization and case-insensitivity. * MT_MATCH_CASE Do case-sensitive lookups even if MT_NORMALIZE is * specified and ZAP normalization flags include * U8_TEXTPREP_TOUPPER. */ typedef enum matchtype { MT_NORMALIZE = 1 << 0, MT_MATCH_CASE = 1 << 1, } matchtype_t; typedef enum zap_flags { /* Use 64-bit hash value (serialized cursors will always use 64-bits) */ ZAP_FLAG_HASH64 = 1 << 0, /* Key is binary, not string (zap_add_uint64() can be used) */ ZAP_FLAG_UINT64_KEY = 1 << 1, /* * First word of key (which must be an array of uint64) is * already randomly distributed. */ ZAP_FLAG_PRE_HASHED_KEY = 1 << 2, #if defined(__linux__) && defined(_KERNEL) } zfs_zap_flags_t; #define zap_flags_t zfs_zap_flags_t #else } zap_flags_t; #endif /* * Create a new zapobj with no attributes and return its object number. */ uint64_t zap_create(objset_t *ds, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); uint64_t zap_create_dnsize(objset_t *ds, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, int dnodesize, dmu_tx_t *tx); uint64_t zap_create_norm(objset_t *ds, int normflags, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); uint64_t zap_create_norm_dnsize(objset_t *ds, int normflags, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, int dnodesize, dmu_tx_t *tx); uint64_t zap_create_flags(objset_t *os, int normflags, zap_flags_t flags, dmu_object_type_t ot, int leaf_blockshift, int indirect_blockshift, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); uint64_t zap_create_flags_dnsize(objset_t *os, int normflags, zap_flags_t flags, dmu_object_type_t ot, int leaf_blockshift, int indirect_blockshift, dmu_object_type_t bonustype, int bonuslen, int dnodesize, dmu_tx_t *tx); uint64_t zap_create_hold(objset_t *os, int normflags, zap_flags_t flags, dmu_object_type_t ot, int leaf_blockshift, int indirect_blockshift, dmu_object_type_t bonustype, int bonuslen, int dnodesize, dnode_t **allocated_dnode, const void *tag, dmu_tx_t *tx); uint64_t zap_create_link(objset_t *os, dmu_object_type_t ot, uint64_t parent_obj, const char *name, dmu_tx_t *tx); uint64_t zap_create_link_dnsize(objset_t *os, dmu_object_type_t ot, uint64_t parent_obj, const char *name, int dnodesize, dmu_tx_t *tx); /* * Initialize an already-allocated object. */ void mzap_create_impl(dnode_t *dn, int normflags, zap_flags_t flags, dmu_tx_t *tx); /* * Create a new zapobj with no attributes from the given (unallocated) * object number. */ int zap_create_claim(objset_t *ds, uint64_t obj, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); int zap_create_claim_dnsize(objset_t *ds, uint64_t obj, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, int dnodesize, dmu_tx_t *tx); int zap_create_claim_norm(objset_t *ds, uint64_t obj, int normflags, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, dmu_tx_t *tx); int zap_create_claim_norm_dnsize(objset_t *ds, uint64_t obj, int normflags, dmu_object_type_t ot, dmu_object_type_t bonustype, int bonuslen, int dnodesize, dmu_tx_t *tx); /* * The zapobj passed in must be a valid ZAP object for all of the * following routines. */ /* * Destroy this zapobj and all its attributes. * * Frees the object number using dmu_object_free. */ int zap_destroy(objset_t *ds, uint64_t zapobj, dmu_tx_t *tx); /* * Manipulate attributes. * * 'integer_size' is in bytes, and must be 1, 2, 4, or 8. */ /* * Retrieve the contents of the attribute with the given name. * * If the requested attribute does not exist, the call will fail and * return ENOENT. * * If 'integer_size' is smaller than the attribute's integer size, the * call will fail and return EINVAL. * * If 'integer_size' is equal to or larger than the attribute's integer * size, the call will succeed and return 0. * * When converting to a larger integer size, the integers will be treated as * unsigned (ie. no sign-extension will be performed). * * 'num_integers' is the length (in integers) of 'buf'. * * If the attribute is longer than the buffer, as many integers as will * fit will be transferred to 'buf'. If the entire attribute was not * transferred, the call will return EOVERFLOW. */ int zap_lookup(objset_t *ds, uint64_t zapobj, const char *name, uint64_t integer_size, uint64_t num_integers, void *buf); /* * If rn_len is nonzero, realname will be set to the name of the found * entry (which may be different from the requested name if matchtype is * not MT_EXACT). * * If normalization_conflictp is not NULL, it will be set if there is * another name with the same case/unicode normalized form. */ int zap_lookup_norm(objset_t *ds, uint64_t zapobj, const char *name, uint64_t integer_size, uint64_t num_integers, void *buf, matchtype_t mt, char *realname, int rn_len, boolean_t *normalization_conflictp); int zap_lookup_uint64(objset_t *os, uint64_t zapobj, const uint64_t *key, int key_numints, uint64_t integer_size, uint64_t num_integers, void *buf); int zap_contains(objset_t *ds, uint64_t zapobj, const char *name); int zap_prefetch(objset_t *os, uint64_t zapobj, const char *name); int zap_prefetch_object(objset_t *os, uint64_t zapobj); int zap_prefetch_uint64(objset_t *os, uint64_t zapobj, const uint64_t *key, int key_numints); int zap_lookup_by_dnode(dnode_t *dn, const char *name, uint64_t integer_size, uint64_t num_integers, void *buf); int zap_lookup_norm_by_dnode(dnode_t *dn, const char *name, uint64_t integer_size, uint64_t num_integers, void *buf, matchtype_t mt, char *realname, int rn_len, boolean_t *ncp); int zap_count_write_by_dnode(dnode_t *dn, const char *name, int add, zfs_refcount_t *towrite, zfs_refcount_t *tooverwrite); /* * Create an attribute with the given name and value. * * If an attribute with the given name already exists, the call will * fail and return EEXIST. */ int zap_add(objset_t *ds, uint64_t zapobj, const char *key, int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); int zap_add_by_dnode(dnode_t *dn, const char *key, int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); int zap_add_uint64(objset_t *ds, uint64_t zapobj, const uint64_t *key, int key_numints, int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); int zap_add_uint64_by_dnode(dnode_t *dn, const uint64_t *key, int key_numints, int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); /* * Set the attribute with the given name to the given value. If an * attribute with the given name does not exist, it will be created. If * an attribute with the given name already exists, the previous value * will be overwritten. The integer_size may be different from the * existing attribute's integer size, in which case the attribute's * integer size will be updated to the new value. */ int zap_update(objset_t *ds, uint64_t zapobj, const char *name, int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); int zap_update_uint64(objset_t *os, uint64_t zapobj, const uint64_t *key, int key_numints, int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); int zap_update_uint64_by_dnode(dnode_t *dn, const uint64_t *key, int key_numints, int integer_size, uint64_t num_integers, const void *val, dmu_tx_t *tx); /* * Get the length (in integers) and the integer size of the specified * attribute. * * If the requested attribute does not exist, the call will fail and * return ENOENT. */ int zap_length(objset_t *ds, uint64_t zapobj, const char *name, uint64_t *integer_size, uint64_t *num_integers); int zap_length_uint64(objset_t *os, uint64_t zapobj, const uint64_t *key, int key_numints, uint64_t *integer_size, uint64_t *num_integers); /* * Remove the specified attribute. * * If the specified attribute does not exist, the call will fail and * return ENOENT. */ int zap_remove(objset_t *ds, uint64_t zapobj, const char *name, dmu_tx_t *tx); int zap_remove_norm(objset_t *ds, uint64_t zapobj, const char *name, matchtype_t mt, dmu_tx_t *tx); int zap_remove_by_dnode(dnode_t *dn, const char *name, dmu_tx_t *tx); int zap_remove_uint64(objset_t *os, uint64_t zapobj, const uint64_t *key, int key_numints, dmu_tx_t *tx); int zap_remove_uint64_by_dnode(dnode_t *dn, const uint64_t *key, int key_numints, dmu_tx_t *tx); /* * Returns (in *count) the number of attributes in the specified zap * object. */ int zap_count(objset_t *ds, uint64_t zapobj, uint64_t *count); /* * Returns (in name) the name of the entry whose (value & mask) * (za_first_integer) is value, or ENOENT if not found. The string * pointed to by name must be at least 256 bytes long. If mask==0, the * match must be exact (ie, same as mask=-1ULL). */ int zap_value_search(objset_t *os, uint64_t zapobj, uint64_t value, uint64_t mask, char *name, uint64_t namelen); /* * Transfer all the entries from fromobj into intoobj. Only works on * int_size=8 num_integers=1 values. Fails if there are any duplicated * entries. */ int zap_join(objset_t *os, uint64_t fromobj, uint64_t intoobj, dmu_tx_t *tx); /* Same as zap_join, but set the values to 'value'. */ int zap_join_key(objset_t *os, uint64_t fromobj, uint64_t intoobj, uint64_t value, dmu_tx_t *tx); /* Same as zap_join, but add together any duplicated entries. */ int zap_join_increment(objset_t *os, uint64_t fromobj, uint64_t intoobj, dmu_tx_t *tx); /* * Manipulate entries where the name + value are the "same" (the name is * a stringified version of the value). */ int zap_add_int(objset_t *os, uint64_t obj, uint64_t value, dmu_tx_t *tx); int zap_remove_int(objset_t *os, uint64_t obj, uint64_t value, dmu_tx_t *tx); int zap_lookup_int(objset_t *os, uint64_t obj, uint64_t value); int zap_increment_int(objset_t *os, uint64_t obj, uint64_t key, int64_t delta, dmu_tx_t *tx); /* Here the key is an int and the value is a different int. */ int zap_add_int_key(objset_t *os, uint64_t obj, uint64_t key, uint64_t value, dmu_tx_t *tx); int zap_update_int_key(objset_t *os, uint64_t obj, uint64_t key, uint64_t value, dmu_tx_t *tx); int zap_lookup_int_key(objset_t *os, uint64_t obj, uint64_t key, uint64_t *valuep); int zap_increment(objset_t *os, uint64_t obj, const char *name, int64_t delta, dmu_tx_t *tx); struct zap; struct zap_leaf; typedef struct zap_cursor { /* This structure is opaque! */ objset_t *zc_objset; struct zap *zc_zap; struct zap_leaf *zc_leaf; uint64_t zc_zapobj; uint64_t zc_serialized; uint64_t zc_hash; uint32_t zc_cd; boolean_t zc_prefetch; } zap_cursor_t; typedef struct { int za_integer_length; /* * za_normalization_conflict will be set if there are additional * entries with this normalized form (eg, "foo" and "Foo"). */ boolean_t za_normalization_conflict; uint64_t za_num_integers; uint64_t za_first_integer; /* no sign extension for <8byte ints */ uint32_t za_name_len; uint32_t za_pad; /* We want za_name aligned to uint64_t. */ char za_name[]; } zap_attribute_t; void zap_init(void); void zap_fini(void); /* * Alloc and free zap_attribute_t. */ zap_attribute_t *zap_attribute_alloc(void); zap_attribute_t *zap_attribute_long_alloc(void); void zap_attribute_free(zap_attribute_t *attrp); /* * The interface for listing all the attributes of a zapobj can be * thought of as cursor moving down a list of the attributes one by * one. The cookie returned by the zap_cursor_serialize routine is * persistent across system calls (and across reboot, even). */ /* * Initialize a zap cursor, pointing to the "first" attribute of the * zapobj. You must _fini the cursor when you are done with it. */ void zap_cursor_init(zap_cursor_t *zc, objset_t *os, uint64_t zapobj); void zap_cursor_init_noprefetch(zap_cursor_t *zc, objset_t *os, uint64_t zapobj); void zap_cursor_fini(zap_cursor_t *zc); /* * Get the attribute currently pointed to by the cursor. Returns * ENOENT if at the end of the attributes. */ int zap_cursor_retrieve(zap_cursor_t *zc, zap_attribute_t *za); /* * Advance the cursor to the next attribute. */ void zap_cursor_advance(zap_cursor_t *zc); /* * Get a persistent cookie pointing to the current position of the zap * cursor. The low 4 bits in the cookie are always zero, and thus can * be used as to differentiate a serialized cookie from a different type * of value. The cookie will be less than 2^32 as long as there are * fewer than 2^22 (4.2 million) entries in the zap object. */ uint64_t zap_cursor_serialize(zap_cursor_t *zc); /* * Initialize a zap cursor pointing to the position recorded by * zap_cursor_serialize (in the "serialized" argument). You can also * use a "serialized" argument of 0 to start at the beginning of the * zapobj (ie. zap_cursor_init_serialized(..., 0) is equivalent to * zap_cursor_init(...).) */ void zap_cursor_init_serialized(zap_cursor_t *zc, objset_t *ds, uint64_t zapobj, uint64_t serialized); #define ZAP_HISTOGRAM_SIZE 10 typedef struct zap_stats { /* * Size of the pointer table (in number of entries). * This is always a power of 2, or zero if it's a microzap. * In general, it should be considerably greater than zs_num_leafs. */ uint64_t zs_ptrtbl_len; uint64_t zs_blocksize; /* size of zap blocks */ /* * The number of blocks used. Note that some blocks may be * wasted because old ptrtbl's and large name/value blocks are * not reused. (Although their space is reclaimed, we don't * reuse those offsets in the object.) */ uint64_t zs_num_blocks; /* * Pointer table values from zap_ptrtbl in the zap_phys_t */ uint64_t zs_ptrtbl_nextblk; /* next (larger) copy start block */ uint64_t zs_ptrtbl_blks_copied; /* number source blocks copied */ uint64_t zs_ptrtbl_zt_blk; /* starting block number */ uint64_t zs_ptrtbl_zt_numblks; /* number of blocks */ uint64_t zs_ptrtbl_zt_shift; /* bits to index it */ /* * Values of the other members of the zap_phys_t */ uint64_t zs_block_type; /* ZBT_HEADER */ uint64_t zs_magic; /* ZAP_MAGIC */ uint64_t zs_num_leafs; /* The number of leaf blocks */ uint64_t zs_num_entries; /* The number of zap entries */ uint64_t zs_salt; /* salt to stir into hash function */ /* * Histograms. For all histograms, the last index * (ZAP_HISTOGRAM_SIZE-1) includes any values which are greater * than what can be represented. For example * zs_leafs_with_n5_entries[ZAP_HISTOGRAM_SIZE-1] is the number * of leafs with more than 45 entries. */ /* * zs_leafs_with_n_pointers[n] is the number of leafs with * 2^n pointers to it. */ uint64_t zs_leafs_with_2n_pointers[ZAP_HISTOGRAM_SIZE]; /* * zs_leafs_with_n_entries[n] is the number of leafs with * [n*5, (n+1)*5) entries. In the current implementation, there * can be at most 55 entries in any block, but there may be * fewer if the name or value is large, or the block is not * completely full. */ uint64_t zs_blocks_with_n5_entries[ZAP_HISTOGRAM_SIZE]; /* * zs_leafs_n_tenths_full[n] is the number of leafs whose * fullness is in the range [n/10, (n+1)/10). */ uint64_t zs_blocks_n_tenths_full[ZAP_HISTOGRAM_SIZE]; /* * zs_entries_using_n_chunks[n] is the number of entries which * consume n 24-byte chunks. (Note, large names/values only use * one chunk, but contribute to zs_num_blocks_large.) */ uint64_t zs_entries_using_n_chunks[ZAP_HISTOGRAM_SIZE]; /* * zs_buckets_with_n_entries[n] is the number of buckets (each * leaf has 64 buckets) with n entries. * zs_buckets_with_n_entries[1] should be very close to * zs_num_entries. */ uint64_t zs_buckets_with_n_entries[ZAP_HISTOGRAM_SIZE]; } zap_stats_t; /* * Get statistics about a ZAP object. Note: you need to be aware of the * internal implementation of the ZAP to correctly interpret some of the * statistics. This interface shouldn't be relied on unless you really * know what you're doing. */ int zap_get_stats(objset_t *ds, uint64_t zapobj, zap_stats_t *zs); #ifdef __cplusplus } #endif #endif /* _SYS_ZAP_H */