/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or http://www.opensolaris.org/os/licensing. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2017 by Lawrence Livermore National Security, LLC. */ #include #include #include #include #include #include #include #include #include /* * Multi-Modifier Protection (MMP) attempts to prevent a user from importing * or opening a pool on more than one host at a time. In particular, it * prevents "zpool import -f" on a host from succeeding while the pool is * already imported on another host. There are many other ways in which a * device could be used by two hosts for different purposes at the same time * resulting in pool damage. This implementation does not attempt to detect * those cases. * * MMP operates by ensuring there are frequent visible changes on disk (a * "heartbeat") at all times. And by altering the import process to check * for these changes and failing the import when they are detected. This * functionality is enabled by setting the 'multihost' pool property to on. * * Uberblocks written by the txg_sync thread always go into the first * (N-MMP_BLOCKS_PER_LABEL) slots, the remaining slots are reserved for MMP. * They are used to hold uberblocks which are exactly the same as the last * synced uberblock except that the ub_timestamp and mmp_config are frequently * updated. Like all other uberblocks, the slot is written with an embedded * checksum, and slots with invalid checksums are ignored. This provides the * "heartbeat", with no risk of overwriting good uberblocks that must be * preserved, e.g. previous txgs and associated block pointers. * * Three optional fields are added to uberblock structure; ub_mmp_magic, * ub_mmp_config, and ub_mmp_delay. The ub_mmp_magic value allows zfs to tell * whether the other ub_mmp_* fields are valid. The ub_mmp_config field tells * the importing host the settings of zfs_multihost_interval and * zfs_multihost_fail_intervals on the host which last had (or currently has) * the pool imported. These determine how long a host must wait to detect * activity in the pool, before concluding the pool is not in use. The * mmp_delay field is a decaying average of the amount of time between * completion of successive MMP writes, in nanoseconds. It indicates whether * MMP is enabled. * * During import an activity test may now be performed to determine if * the pool is in use. The activity test is typically required if the * ZPOOL_CONFIG_HOSTID does not match the system hostid, the pool state is * POOL_STATE_ACTIVE, and the pool is not a root pool. * * The activity test finds the "best" uberblock (highest txg, timestamp, and, if * ub_mmp_magic is valid, sequence number from ub_mmp_config). It then waits * some time, and finds the "best" uberblock again. If any of the mentioned * fields have different values in the newly read uberblock, the pool is in use * by another host and the import fails. In order to assure the accuracy of the * activity test, the default values result in an activity test duration of 20x * the mmp write interval. * * The duration of the "zpool import" activity test depends on the information * available in the "best" uberblock: * * 1) If uberblock was written by zfs-0.8 or newer and fail_intervals > 0: * ub_mmp_config.fail_intervals * ub_mmp_config.multihost_interval * 2 * * In this case, a weak guarantee is provided. Since the host which last had * the pool imported will suspend the pool if no mmp writes land within * fail_intervals * multihost_interval ms, the absence of writes during that * time means either the pool is not imported, or it is imported but the pool * is suspended and no further writes will occur. * * Note that resuming the suspended pool on the remote host would invalidate * this guarantee, and so it is not allowed. * * The factor of 2 provides a conservative safety factor and derives from * MMP_IMPORT_SAFETY_FACTOR; * * 2) If uberblock was written by zfs-0.8 or newer and fail_intervals == 0: * (ub_mmp_config.multihost_interval + ub_mmp_delay) * * zfs_multihost_import_intervals * * In this case no guarantee can provided. However, as long as some devices * are healthy and connected, it is likely that at least one write will land * within (multihost_interval + mmp_delay) because multihost_interval is * enough time for a write to be attempted to each leaf vdev, and mmp_delay * is enough for one to land, based on past delays. Multiplying by * zfs_multihost_import_intervals provides a conservative safety factor. * * 3) If uberblock was written by zfs-0.7: * (zfs_multihost_interval + ub_mmp_delay) * zfs_multihost_import_intervals * * The same logic as case #2 applies, but we do not know remote tunables. * * We use the local value for zfs_multihost_interval because the original MMP * did not record this value in the uberblock. * * ub_mmp_delay >= (zfs_multihost_interval / leaves), so if the other host * has a much larger zfs_multihost_interval set, ub_mmp_delay will reflect * that. We will have waited enough time for zfs_multihost_import_intervals * writes to be issued and all but one to land. * * single device pool example delays * * import_delay = (1 + 1) * 20 = 40s #defaults, no I/O delay * import_delay = (1 + 10) * 20 = 220s #defaults, 10s I/O delay * import_delay = (10 + 10) * 20 = 400s #10s multihost_interval, * no I/O delay * 100 device pool example delays * * import_delay = (1 + .01) * 20 = 20s #defaults, no I/O delay * import_delay = (1 + 10) * 20 = 220s #defaults, 10s I/O delay * import_delay = (10 + .1) * 20 = 202s #10s multihost_interval, * no I/O delay * * 4) Otherwise, this uberblock was written by a pre-MMP zfs: * zfs_multihost_import_intervals * zfs_multihost_interval * * In this case local tunables are used. By default this product = 10s, long * enough for a pool with any activity at all to write at least one * uberblock. No guarantee can be provided. * * Additionally, the duration is then extended by a random 25% to attempt to to * detect simultaneous imports. For example, if both partner hosts are rebooted * at the same time and automatically attempt to import the pool. */ /* * Used to control the frequency of mmp writes which are performed when the * 'multihost' pool property is on. This is one factor used to determine the * length of the activity check during import. * * On average an mmp write will be issued for each leaf vdev every * zfs_multihost_interval milliseconds. In practice, the observed period can * vary with the I/O load and this observed value is the ub_mmp_delay which is * stored in the uberblock. The minimum allowed value is 100 ms. */ ulong_t zfs_multihost_interval = MMP_DEFAULT_INTERVAL; /* * Used to control the duration of the activity test on import. Smaller values * of zfs_multihost_import_intervals will reduce the import time but increase * the risk of failing to detect an active pool. The total activity check time * is never allowed to drop below one second. A value of 0 is ignored and * treated as if it was set to 1. */ uint_t zfs_multihost_import_intervals = MMP_DEFAULT_IMPORT_INTERVALS; /* * Controls the behavior of the pool when mmp write failures or delays are * detected. * * When zfs_multihost_fail_intervals = 0, mmp write failures or delays are * ignored. The failures will still be reported to the ZED which depending on * its configuration may take action such as suspending the pool or taking a * device offline. * * When zfs_multihost_fail_intervals > 0, the pool will be suspended if * zfs_multihost_fail_intervals * zfs_multihost_interval milliseconds pass * without a successful mmp write. This guarantees the activity test will see * mmp writes if the pool is imported. A value of 1 is ignored and treated as * if it was set to 2, because a single leaf vdev pool will issue a write once * per multihost_interval and thus any variation in latency would cause the * pool to be suspended. */ uint_t zfs_multihost_fail_intervals = MMP_DEFAULT_FAIL_INTERVALS; static void *const mmp_tag = "mmp_write_uberblock"; static void mmp_thread(void *arg); void mmp_init(spa_t *spa) { mmp_thread_t *mmp = &spa->spa_mmp; mutex_init(&mmp->mmp_thread_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&mmp->mmp_thread_cv, NULL, CV_DEFAULT, NULL); mutex_init(&mmp->mmp_io_lock, NULL, MUTEX_DEFAULT, NULL); mmp->mmp_kstat_id = 1; } void mmp_fini(spa_t *spa) { mmp_thread_t *mmp = &spa->spa_mmp; mutex_destroy(&mmp->mmp_thread_lock); cv_destroy(&mmp->mmp_thread_cv); mutex_destroy(&mmp->mmp_io_lock); } static void mmp_thread_enter(mmp_thread_t *mmp, callb_cpr_t *cpr) { CALLB_CPR_INIT(cpr, &mmp->mmp_thread_lock, callb_generic_cpr, FTAG); mutex_enter(&mmp->mmp_thread_lock); } static void mmp_thread_exit(mmp_thread_t *mmp, kthread_t **mpp, callb_cpr_t *cpr) { ASSERT(*mpp != NULL); *mpp = NULL; cv_broadcast(&mmp->mmp_thread_cv); CALLB_CPR_EXIT(cpr); /* drops &mmp->mmp_thread_lock */ thread_exit(); } void mmp_thread_start(spa_t *spa) { mmp_thread_t *mmp = &spa->spa_mmp; if (spa_writeable(spa)) { mutex_enter(&mmp->mmp_thread_lock); if (!mmp->mmp_thread) { mmp->mmp_thread = thread_create(NULL, 0, mmp_thread, spa, 0, &p0, TS_RUN, defclsyspri); zfs_dbgmsg("MMP thread started pool '%s' " "gethrtime %llu", spa_name(spa), gethrtime()); } mutex_exit(&mmp->mmp_thread_lock); } } void mmp_thread_stop(spa_t *spa) { mmp_thread_t *mmp = &spa->spa_mmp; mutex_enter(&mmp->mmp_thread_lock); mmp->mmp_thread_exiting = 1; cv_broadcast(&mmp->mmp_thread_cv); while (mmp->mmp_thread) { cv_wait(&mmp->mmp_thread_cv, &mmp->mmp_thread_lock); } mutex_exit(&mmp->mmp_thread_lock); zfs_dbgmsg("MMP thread stopped pool '%s' gethrtime %llu", spa_name(spa), gethrtime()); ASSERT(mmp->mmp_thread == NULL); mmp->mmp_thread_exiting = 0; } typedef enum mmp_vdev_state_flag { MMP_FAIL_NOT_WRITABLE = (1 << 0), MMP_FAIL_WRITE_PENDING = (1 << 1), } mmp_vdev_state_flag_t; /* * Find a leaf vdev to write an MMP block to. It must not have an outstanding * mmp write (if so a new write will also likely block). If there is no usable * leaf, a nonzero error value is returned. The error value returned is a bit * field. * * MMP_FAIL_WRITE_PENDING One or more leaf vdevs are writeable, but have an * outstanding MMP write. * MMP_FAIL_NOT_WRITABLE One or more leaf vdevs are not writeable. */ static int mmp_next_leaf(spa_t *spa) { vdev_t *leaf; vdev_t *starting_leaf; int fail_mask = 0; ASSERT(MUTEX_HELD(&spa->spa_mmp.mmp_io_lock)); ASSERT(spa_config_held(spa, SCL_STATE, RW_READER)); ASSERT(list_link_active(&spa->spa_leaf_list.list_head) == B_TRUE); ASSERT(!list_is_empty(&spa->spa_leaf_list)); if (spa->spa_mmp.mmp_leaf_last_gen != spa->spa_leaf_list_gen) { spa->spa_mmp.mmp_last_leaf = list_head(&spa->spa_leaf_list); spa->spa_mmp.mmp_leaf_last_gen = spa->spa_leaf_list_gen; } leaf = spa->spa_mmp.mmp_last_leaf; if (leaf == NULL) leaf = list_head(&spa->spa_leaf_list); starting_leaf = leaf; do { leaf = list_next(&spa->spa_leaf_list, leaf); if (leaf == NULL) leaf = list_head(&spa->spa_leaf_list); /* * We skip unwritable, offline, detached, and dRAID spare * devices as they are either not legal targets or the write * may fail or not be seen by other hosts. Skipped dRAID * spares can never be written so the fail mask is not set. */ if (!vdev_writeable(leaf) || leaf->vdev_offline || leaf->vdev_detached) { fail_mask |= MMP_FAIL_NOT_WRITABLE; } else if (leaf->vdev_ops == &vdev_draid_spare_ops) { continue; } else if (leaf->vdev_mmp_pending != 0) { fail_mask |= MMP_FAIL_WRITE_PENDING; } else { spa->spa_mmp.mmp_last_leaf = leaf; return (0); } } while (leaf != starting_leaf); ASSERT(fail_mask); return (fail_mask); } /* * MMP writes are issued on a fixed schedule, but may complete at variable, * much longer, intervals. The mmp_delay captures long periods between * successful writes for any reason, including disk latency, scheduling delays, * etc. * * The mmp_delay is usually calculated as a decaying average, but if the latest * delay is higher we do not average it, so that we do not hide sudden spikes * which the importing host must wait for. * * If writes are occurring frequently, such as due to a high rate of txg syncs, * the mmp_delay could become very small. Since those short delays depend on * activity we cannot count on, we never allow mmp_delay to get lower than rate * expected if only mmp_thread writes occur. * * If an mmp write was skipped or fails, and we have already waited longer than * mmp_delay, we need to update it so the next write reflects the longer delay. * * Do not set mmp_delay if the multihost property is not on, so as not to * trigger an activity check on import. */ static void mmp_delay_update(spa_t *spa, boolean_t write_completed) { mmp_thread_t *mts = &spa->spa_mmp; hrtime_t delay = gethrtime() - mts->mmp_last_write; ASSERT(MUTEX_HELD(&mts->mmp_io_lock)); if (spa_multihost(spa) == B_FALSE) { mts->mmp_delay = 0; return; } if (delay > mts->mmp_delay) mts->mmp_delay = delay; if (write_completed == B_FALSE) return; mts->mmp_last_write = gethrtime(); /* * strictly less than, in case delay was changed above. */ if (delay < mts->mmp_delay) { hrtime_t min_delay = MSEC2NSEC(MMP_INTERVAL_OK(zfs_multihost_interval)) / MAX(1, vdev_count_leaves(spa)); mts->mmp_delay = MAX(((delay + mts->mmp_delay * 127) / 128), min_delay); } } static void mmp_write_done(zio_t *zio) { spa_t *spa = zio->io_spa; vdev_t *vd = zio->io_vd; mmp_thread_t *mts = zio->io_private; mutex_enter(&mts->mmp_io_lock); uint64_t mmp_kstat_id = vd->vdev_mmp_kstat_id; hrtime_t mmp_write_duration = gethrtime() - vd->vdev_mmp_pending; mmp_delay_update(spa, (zio->io_error == 0)); vd->vdev_mmp_pending = 0; vd->vdev_mmp_kstat_id = 0; mutex_exit(&mts->mmp_io_lock); spa_config_exit(spa, SCL_STATE, mmp_tag); spa_mmp_history_set(spa, mmp_kstat_id, zio->io_error, mmp_write_duration); abd_free(zio->io_abd); } /* * When the uberblock on-disk is updated by a spa_sync, * creating a new "best" uberblock, update the one stored * in the mmp thread state, used for mmp writes. */ void mmp_update_uberblock(spa_t *spa, uberblock_t *ub) { mmp_thread_t *mmp = &spa->spa_mmp; mutex_enter(&mmp->mmp_io_lock); mmp->mmp_ub = *ub; mmp->mmp_seq = 1; mmp->mmp_ub.ub_timestamp = gethrestime_sec(); mmp_delay_update(spa, B_TRUE); mutex_exit(&mmp->mmp_io_lock); } /* * Choose a random vdev, label, and MMP block, and write over it * with a copy of the last-synced uberblock, whose timestamp * has been updated to reflect that the pool is in use. */ static void mmp_write_uberblock(spa_t *spa) { int flags = ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL; mmp_thread_t *mmp = &spa->spa_mmp; uberblock_t *ub; vdev_t *vd = NULL; int label, error; uint64_t offset; hrtime_t lock_acquire_time = gethrtime(); spa_config_enter(spa, SCL_STATE, mmp_tag, RW_READER); lock_acquire_time = gethrtime() - lock_acquire_time; if (lock_acquire_time > (MSEC2NSEC(MMP_MIN_INTERVAL) / 10)) zfs_dbgmsg("MMP SCL_STATE acquisition pool '%s' took %llu ns " "gethrtime %llu", spa_name(spa), lock_acquire_time, gethrtime()); mutex_enter(&mmp->mmp_io_lock); error = mmp_next_leaf(spa); /* * spa_mmp_history has two types of entries: * Issued MMP write: records time issued, error status, etc. * Skipped MMP write: an MMP write could not be issued because no * suitable leaf vdev was available. See comment above struct * spa_mmp_history for details. */ if (error) { mmp_delay_update(spa, B_FALSE); if (mmp->mmp_skip_error == error) { spa_mmp_history_set_skip(spa, mmp->mmp_kstat_id - 1); } else { mmp->mmp_skip_error = error; spa_mmp_history_add(spa, mmp->mmp_ub.ub_txg, gethrestime_sec(), mmp->mmp_delay, NULL, 0, mmp->mmp_kstat_id++, error); zfs_dbgmsg("MMP error choosing leaf pool '%s' " "gethrtime %llu fail_mask %#x", spa_name(spa), gethrtime(), error); } mutex_exit(&mmp->mmp_io_lock); spa_config_exit(spa, SCL_STATE, mmp_tag); return; } vd = spa->spa_mmp.mmp_last_leaf; if (mmp->mmp_skip_error != 0) { mmp->mmp_skip_error = 0; zfs_dbgmsg("MMP write after skipping due to unavailable " "leaves, pool '%s' gethrtime %llu leaf %llu", spa_name(spa), (u_longlong_t)gethrtime(), (u_longlong_t)vd->vdev_guid); } if (mmp->mmp_zio_root == NULL) mmp->mmp_zio_root = zio_root(spa, NULL, NULL, flags | ZIO_FLAG_GODFATHER); if (mmp->mmp_ub.ub_timestamp != gethrestime_sec()) { /* * Want to reset mmp_seq when timestamp advances because after * an mmp_seq wrap new values will not be chosen by * uberblock_compare() as the "best". */ mmp->mmp_ub.ub_timestamp = gethrestime_sec(); mmp->mmp_seq = 1; } ub = &mmp->mmp_ub; ub->ub_mmp_magic = MMP_MAGIC; ub->ub_mmp_delay = mmp->mmp_delay; ub->ub_mmp_config = MMP_SEQ_SET(mmp->mmp_seq) | MMP_INTERVAL_SET(MMP_INTERVAL_OK(zfs_multihost_interval)) | MMP_FAIL_INT_SET(MMP_FAIL_INTVS_OK( zfs_multihost_fail_intervals)); vd->vdev_mmp_pending = gethrtime(); vd->vdev_mmp_kstat_id = mmp->mmp_kstat_id; zio_t *zio = zio_null(mmp->mmp_zio_root, spa, NULL, NULL, NULL, flags); abd_t *ub_abd = abd_alloc_for_io(VDEV_UBERBLOCK_SIZE(vd), B_TRUE); abd_zero(ub_abd, VDEV_UBERBLOCK_SIZE(vd)); abd_copy_from_buf(ub_abd, ub, sizeof (uberblock_t)); mmp->mmp_seq++; mmp->mmp_kstat_id++; mutex_exit(&mmp->mmp_io_lock); offset = VDEV_UBERBLOCK_OFFSET(vd, VDEV_UBERBLOCK_COUNT(vd) - MMP_BLOCKS_PER_LABEL + random_in_range(MMP_BLOCKS_PER_LABEL)); label = random_in_range(VDEV_LABELS); vdev_label_write(zio, vd, label, ub_abd, offset, VDEV_UBERBLOCK_SIZE(vd), mmp_write_done, mmp, flags | ZIO_FLAG_DONT_PROPAGATE); (void) spa_mmp_history_add(spa, ub->ub_txg, ub->ub_timestamp, ub->ub_mmp_delay, vd, label, vd->vdev_mmp_kstat_id, 0); zio_nowait(zio); } static void mmp_thread(void *arg) { spa_t *spa = (spa_t *)arg; mmp_thread_t *mmp = &spa->spa_mmp; boolean_t suspended = spa_suspended(spa); boolean_t multihost = spa_multihost(spa); uint64_t mmp_interval = MSEC2NSEC(MMP_INTERVAL_OK( zfs_multihost_interval)); uint32_t mmp_fail_intervals = MMP_FAIL_INTVS_OK( zfs_multihost_fail_intervals); hrtime_t mmp_fail_ns = mmp_fail_intervals * mmp_interval; boolean_t last_spa_suspended = suspended; boolean_t last_spa_multihost = multihost; uint64_t last_mmp_interval = mmp_interval; uint32_t last_mmp_fail_intervals = mmp_fail_intervals; hrtime_t last_mmp_fail_ns = mmp_fail_ns; callb_cpr_t cpr; int skip_wait = 0; mmp_thread_enter(mmp, &cpr); /* * There have been no MMP writes yet. Setting mmp_last_write here gives * us one mmp_fail_ns period, which is consistent with the activity * check duration, to try to land an MMP write before MMP suspends the * pool (if so configured). */ mutex_enter(&mmp->mmp_io_lock); mmp->mmp_last_write = gethrtime(); mmp->mmp_delay = MSEC2NSEC(MMP_INTERVAL_OK(zfs_multihost_interval)); mutex_exit(&mmp->mmp_io_lock); while (!mmp->mmp_thread_exiting) { hrtime_t next_time = gethrtime() + MSEC2NSEC(MMP_DEFAULT_INTERVAL); int leaves = MAX(vdev_count_leaves(spa), 1); /* Detect changes in tunables or state */ last_spa_suspended = suspended; last_spa_multihost = multihost; suspended = spa_suspended(spa); multihost = spa_multihost(spa); last_mmp_interval = mmp_interval; last_mmp_fail_intervals = mmp_fail_intervals; last_mmp_fail_ns = mmp_fail_ns; mmp_interval = MSEC2NSEC(MMP_INTERVAL_OK( zfs_multihost_interval)); mmp_fail_intervals = MMP_FAIL_INTVS_OK( zfs_multihost_fail_intervals); /* Smooth so pool is not suspended when reducing tunables */ if (mmp_fail_intervals * mmp_interval < mmp_fail_ns) { mmp_fail_ns = (mmp_fail_ns * 31 + mmp_fail_intervals * mmp_interval) / 32; } else { mmp_fail_ns = mmp_fail_intervals * mmp_interval; } if (mmp_interval != last_mmp_interval || mmp_fail_intervals != last_mmp_fail_intervals) { /* * We want other hosts to see new tunables as quickly as * possible. Write out at higher frequency than usual. */ skip_wait += leaves; } if (multihost) next_time = gethrtime() + mmp_interval / leaves; if (mmp_fail_ns != last_mmp_fail_ns) { zfs_dbgmsg("MMP interval change pool '%s' " "gethrtime %llu last_mmp_interval %llu " "mmp_interval %llu last_mmp_fail_intervals %u " "mmp_fail_intervals %u mmp_fail_ns %llu " "skip_wait %d leaves %d next_time %llu", spa_name(spa), (u_longlong_t)gethrtime(), (u_longlong_t)last_mmp_interval, (u_longlong_t)mmp_interval, last_mmp_fail_intervals, mmp_fail_intervals, (u_longlong_t)mmp_fail_ns, skip_wait, leaves, (u_longlong_t)next_time); } /* * MMP off => on, or suspended => !suspended: * No writes occurred recently. Update mmp_last_write to give * us some time to try. */ if ((!last_spa_multihost && multihost) || (last_spa_suspended && !suspended)) { zfs_dbgmsg("MMP state change pool '%s': gethrtime %llu " "last_spa_multihost %u multihost %u " "last_spa_suspended %u suspended %u", spa_name(spa), (u_longlong_t)gethrtime(), last_spa_multihost, multihost, last_spa_suspended, suspended); mutex_enter(&mmp->mmp_io_lock); mmp->mmp_last_write = gethrtime(); mmp->mmp_delay = mmp_interval; mutex_exit(&mmp->mmp_io_lock); } /* * MMP on => off: * mmp_delay == 0 tells importing node to skip activity check. */ if (last_spa_multihost && !multihost) { mutex_enter(&mmp->mmp_io_lock); mmp->mmp_delay = 0; mutex_exit(&mmp->mmp_io_lock); } /* * Suspend the pool if no MMP write has succeeded in over * mmp_interval * mmp_fail_intervals nanoseconds. */ if (multihost && !suspended && mmp_fail_intervals && (gethrtime() - mmp->mmp_last_write) > mmp_fail_ns) { zfs_dbgmsg("MMP suspending pool '%s': gethrtime %llu " "mmp_last_write %llu mmp_interval %llu " "mmp_fail_intervals %llu mmp_fail_ns %llu", spa_name(spa), (u_longlong_t)gethrtime(), (u_longlong_t)mmp->mmp_last_write, (u_longlong_t)mmp_interval, (u_longlong_t)mmp_fail_intervals, (u_longlong_t)mmp_fail_ns); cmn_err(CE_WARN, "MMP writes to pool '%s' have not " "succeeded in over %llu ms; suspending pool. " "Hrtime %llu", spa_name(spa), NSEC2MSEC(gethrtime() - mmp->mmp_last_write), gethrtime()); zio_suspend(spa, NULL, ZIO_SUSPEND_MMP); } if (multihost && !suspended) mmp_write_uberblock(spa); if (skip_wait > 0) { next_time = gethrtime() + MSEC2NSEC(MMP_MIN_INTERVAL) / leaves; skip_wait--; } CALLB_CPR_SAFE_BEGIN(&cpr); (void) cv_timedwait_idle_hires(&mmp->mmp_thread_cv, &mmp->mmp_thread_lock, next_time, USEC2NSEC(100), CALLOUT_FLAG_ABSOLUTE); CALLB_CPR_SAFE_END(&cpr, &mmp->mmp_thread_lock); } /* Outstanding writes are allowed to complete. */ zio_wait(mmp->mmp_zio_root); mmp->mmp_zio_root = NULL; mmp_thread_exit(mmp, &mmp->mmp_thread, &cpr); } /* * Signal the MMP thread to wake it, when it is sleeping on * its cv. Used when some module parameter has changed and * we want the thread to know about it. * Only signal if the pool is active and mmp thread is * running, otherwise there is no thread to wake. */ static void mmp_signal_thread(spa_t *spa) { mmp_thread_t *mmp = &spa->spa_mmp; mutex_enter(&mmp->mmp_thread_lock); if (mmp->mmp_thread) cv_broadcast(&mmp->mmp_thread_cv); mutex_exit(&mmp->mmp_thread_lock); } void mmp_signal_all_threads(void) { spa_t *spa = NULL; mutex_enter(&spa_namespace_lock); while ((spa = spa_next(spa))) { if (spa->spa_state == POOL_STATE_ACTIVE) mmp_signal_thread(spa); } mutex_exit(&spa_namespace_lock); } /* BEGIN CSTYLED */ ZFS_MODULE_PARAM_CALL(zfs_multihost, zfs_multihost_, interval, param_set_multihost_interval, param_get_ulong, ZMOD_RW, "Milliseconds between mmp writes to each leaf"); /* END CSTYLED */ ZFS_MODULE_PARAM(zfs_multihost, zfs_multihost_, fail_intervals, UINT, ZMOD_RW, "Max allowed period without a successful mmp write"); ZFS_MODULE_PARAM(zfs_multihost, zfs_multihost_, import_intervals, UINT, ZMOD_RW, "Number of zfs_multihost_interval periods to wait for activity");