/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2011, 2021 by Delphix. All rights reserved. * Copyright 2017 Nexenta Systems, Inc. * Copyright (c) 2014 Integros [integros.com] * Copyright 2016 Toomas Soome * Copyright 2017 Joyent, Inc. * Copyright (c) 2017, Intel Corporation. * Copyright (c) 2019, Datto Inc. All rights reserved. * Copyright (c) 2021, Klara Inc. * Copyright (c) 2021, 2023 Hewlett Packard Enterprise Development LP. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zfs_prop.h" /* * One metaslab from each (normal-class) vdev is used by the ZIL. These are * called "embedded slog metaslabs", are referenced by vdev_log_mg, and are * part of the spa_embedded_log_class. The metaslab with the most free space * in each vdev is selected for this purpose when the pool is opened (or a * vdev is added). See vdev_metaslab_init(). * * Log blocks can be allocated from the following locations. Each one is tried * in order until the allocation succeeds: * 1. dedicated log vdevs, aka "slog" (spa_log_class) * 2. embedded slog metaslabs (spa_embedded_log_class) * 3. other metaslabs in normal vdevs (spa_normal_class) * * zfs_embedded_slog_min_ms disables the embedded slog if there are fewer * than this number of metaslabs in the vdev. This ensures that we don't set * aside an unreasonable amount of space for the ZIL. If set to less than * 1 << (spa_slop_shift + 1), on small pools the usable space may be reduced * (by more than 1<vdev_path != NULL) { zfs_dbgmsg("%s vdev '%s': %s", vd->vdev_ops->vdev_op_type, vd->vdev_path, buf); } else { zfs_dbgmsg("%s-%llu vdev (guid %llu): %s", vd->vdev_ops->vdev_op_type, (u_longlong_t)vd->vdev_id, (u_longlong_t)vd->vdev_guid, buf); } } void vdev_dbgmsg_print_tree(vdev_t *vd, int indent) { char state[20]; if (vd->vdev_ishole || vd->vdev_ops == &vdev_missing_ops) { zfs_dbgmsg("%*svdev %llu: %s", indent, "", (u_longlong_t)vd->vdev_id, vd->vdev_ops->vdev_op_type); return; } switch (vd->vdev_state) { case VDEV_STATE_UNKNOWN: (void) snprintf(state, sizeof (state), "unknown"); break; case VDEV_STATE_CLOSED: (void) snprintf(state, sizeof (state), "closed"); break; case VDEV_STATE_OFFLINE: (void) snprintf(state, sizeof (state), "offline"); break; case VDEV_STATE_REMOVED: (void) snprintf(state, sizeof (state), "removed"); break; case VDEV_STATE_CANT_OPEN: (void) snprintf(state, sizeof (state), "can't open"); break; case VDEV_STATE_FAULTED: (void) snprintf(state, sizeof (state), "faulted"); break; case VDEV_STATE_DEGRADED: (void) snprintf(state, sizeof (state), "degraded"); break; case VDEV_STATE_HEALTHY: (void) snprintf(state, sizeof (state), "healthy"); break; default: (void) snprintf(state, sizeof (state), "", (uint_t)vd->vdev_state); } zfs_dbgmsg("%*svdev %u: %s%s, guid: %llu, path: %s, %s", indent, "", (int)vd->vdev_id, vd->vdev_ops->vdev_op_type, vd->vdev_islog ? " (log)" : "", (u_longlong_t)vd->vdev_guid, vd->vdev_path ? vd->vdev_path : "N/A", state); for (uint64_t i = 0; i < vd->vdev_children; i++) vdev_dbgmsg_print_tree(vd->vdev_child[i], indent + 2); } /* * Virtual device management. */ static vdev_ops_t *const vdev_ops_table[] = { &vdev_root_ops, &vdev_raidz_ops, &vdev_draid_ops, &vdev_draid_spare_ops, &vdev_mirror_ops, &vdev_replacing_ops, &vdev_spare_ops, &vdev_disk_ops, &vdev_file_ops, &vdev_missing_ops, &vdev_hole_ops, &vdev_indirect_ops, NULL }; /* * Given a vdev type, return the appropriate ops vector. */ static vdev_ops_t * vdev_getops(const char *type) { vdev_ops_t *ops, *const *opspp; for (opspp = vdev_ops_table; (ops = *opspp) != NULL; opspp++) if (strcmp(ops->vdev_op_type, type) == 0) break; return (ops); } /* * Given a vdev and a metaslab class, find which metaslab group we're * interested in. All vdevs may belong to two different metaslab classes. * Dedicated slog devices use only the primary metaslab group, rather than a * separate log group. For embedded slogs, the vdev_log_mg will be non-NULL. */ metaslab_group_t * vdev_get_mg(vdev_t *vd, metaslab_class_t *mc) { if (mc == spa_embedded_log_class(vd->vdev_spa) && vd->vdev_log_mg != NULL) return (vd->vdev_log_mg); else return (vd->vdev_mg); } void vdev_default_xlate(vdev_t *vd, const range_seg64_t *logical_rs, range_seg64_t *physical_rs, range_seg64_t *remain_rs) { (void) vd, (void) remain_rs; physical_rs->rs_start = logical_rs->rs_start; physical_rs->rs_end = logical_rs->rs_end; } /* * Derive the enumerated allocation bias from string input. * String origin is either the per-vdev zap or zpool(8). */ static vdev_alloc_bias_t vdev_derive_alloc_bias(const char *bias) { vdev_alloc_bias_t alloc_bias = VDEV_BIAS_NONE; if (strcmp(bias, VDEV_ALLOC_BIAS_LOG) == 0) alloc_bias = VDEV_BIAS_LOG; else if (strcmp(bias, VDEV_ALLOC_BIAS_SPECIAL) == 0) alloc_bias = VDEV_BIAS_SPECIAL; else if (strcmp(bias, VDEV_ALLOC_BIAS_DEDUP) == 0) alloc_bias = VDEV_BIAS_DEDUP; return (alloc_bias); } /* * Default asize function: return the MAX of psize with the asize of * all children. This is what's used by anything other than RAID-Z. */ uint64_t vdev_default_asize(vdev_t *vd, uint64_t psize, uint64_t txg) { uint64_t asize = P2ROUNDUP(psize, 1ULL << vd->vdev_top->vdev_ashift); uint64_t csize; for (int c = 0; c < vd->vdev_children; c++) { csize = vdev_psize_to_asize_txg(vd->vdev_child[c], psize, txg); asize = MAX(asize, csize); } return (asize); } uint64_t vdev_default_min_asize(vdev_t *vd) { return (vd->vdev_min_asize); } /* * Get the minimum allocatable size. We define the allocatable size as * the vdev's asize rounded to the nearest metaslab. This allows us to * replace or attach devices which don't have the same physical size but * can still satisfy the same number of allocations. */ uint64_t vdev_get_min_asize(vdev_t *vd) { vdev_t *pvd = vd->vdev_parent; /* * If our parent is NULL (inactive spare or cache) or is the root, * just return our own asize. */ if (pvd == NULL) return (vd->vdev_asize); /* * The top-level vdev just returns the allocatable size rounded * to the nearest metaslab. */ if (vd == vd->vdev_top) return (P2ALIGN_TYPED(vd->vdev_asize, 1ULL << vd->vdev_ms_shift, uint64_t)); return (pvd->vdev_ops->vdev_op_min_asize(pvd)); } void vdev_set_min_asize(vdev_t *vd) { vd->vdev_min_asize = vdev_get_min_asize(vd); for (int c = 0; c < vd->vdev_children; c++) vdev_set_min_asize(vd->vdev_child[c]); } /* * Get the minimal allocation size for the top-level vdev. */ uint64_t vdev_get_min_alloc(vdev_t *vd) { uint64_t min_alloc = 1ULL << vd->vdev_ashift; if (vd->vdev_ops->vdev_op_min_alloc != NULL) min_alloc = vd->vdev_ops->vdev_op_min_alloc(vd); return (min_alloc); } /* * Get the parity level for a top-level vdev. */ uint64_t vdev_get_nparity(vdev_t *vd) { uint64_t nparity = 0; if (vd->vdev_ops->vdev_op_nparity != NULL) nparity = vd->vdev_ops->vdev_op_nparity(vd); return (nparity); } static int vdev_prop_get_int(vdev_t *vd, vdev_prop_t prop, uint64_t *value) { spa_t *spa = vd->vdev_spa; objset_t *mos = spa->spa_meta_objset; uint64_t objid; int err; if (vd->vdev_root_zap != 0) { objid = vd->vdev_root_zap; } else if (vd->vdev_top_zap != 0) { objid = vd->vdev_top_zap; } else if (vd->vdev_leaf_zap != 0) { objid = vd->vdev_leaf_zap; } else { return (EINVAL); } err = zap_lookup(mos, objid, vdev_prop_to_name(prop), sizeof (uint64_t), 1, value); if (err == ENOENT) *value = vdev_prop_default_numeric(prop); return (err); } /* * Get the number of data disks for a top-level vdev. */ uint64_t vdev_get_ndisks(vdev_t *vd) { uint64_t ndisks = 1; if (vd->vdev_ops->vdev_op_ndisks != NULL) ndisks = vd->vdev_ops->vdev_op_ndisks(vd); return (ndisks); } vdev_t * vdev_lookup_top(spa_t *spa, uint64_t vdev) { vdev_t *rvd = spa->spa_root_vdev; ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0); if (vdev < rvd->vdev_children) { ASSERT(rvd->vdev_child[vdev] != NULL); return (rvd->vdev_child[vdev]); } return (NULL); } vdev_t * vdev_lookup_by_guid(vdev_t *vd, uint64_t guid) { vdev_t *mvd; if (vd->vdev_guid == guid) return (vd); for (int c = 0; c < vd->vdev_children; c++) if ((mvd = vdev_lookup_by_guid(vd->vdev_child[c], guid)) != NULL) return (mvd); return (NULL); } static int vdev_count_leaves_impl(vdev_t *vd) { int n = 0; if (vd->vdev_ops->vdev_op_leaf) return (1); for (int c = 0; c < vd->vdev_children; c++) n += vdev_count_leaves_impl(vd->vdev_child[c]); return (n); } int vdev_count_leaves(spa_t *spa) { int rc; spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER); rc = vdev_count_leaves_impl(spa->spa_root_vdev); spa_config_exit(spa, SCL_VDEV, FTAG); return (rc); } void vdev_add_child(vdev_t *pvd, vdev_t *cvd) { size_t oldsize, newsize; uint64_t id = cvd->vdev_id; vdev_t **newchild; ASSERT(spa_config_held(cvd->vdev_spa, SCL_ALL, RW_WRITER) == SCL_ALL); ASSERT(cvd->vdev_parent == NULL); cvd->vdev_parent = pvd; if (pvd == NULL) return; ASSERT(id >= pvd->vdev_children || pvd->vdev_child[id] == NULL); oldsize = pvd->vdev_children * sizeof (vdev_t *); pvd->vdev_children = MAX(pvd->vdev_children, id + 1); newsize = pvd->vdev_children * sizeof (vdev_t *); newchild = kmem_alloc(newsize, KM_SLEEP); if (pvd->vdev_child != NULL) { memcpy(newchild, pvd->vdev_child, oldsize); kmem_free(pvd->vdev_child, oldsize); } pvd->vdev_child = newchild; pvd->vdev_child[id] = cvd; cvd->vdev_top = (pvd->vdev_top ? pvd->vdev_top: cvd); ASSERT(cvd->vdev_top->vdev_parent->vdev_parent == NULL); /* * Walk up all ancestors to update guid sum. */ for (; pvd != NULL; pvd = pvd->vdev_parent) pvd->vdev_guid_sum += cvd->vdev_guid_sum; if (cvd->vdev_ops->vdev_op_leaf) { list_insert_head(&cvd->vdev_spa->spa_leaf_list, cvd); cvd->vdev_spa->spa_leaf_list_gen++; } } void vdev_remove_child(vdev_t *pvd, vdev_t *cvd) { int c; uint_t id = cvd->vdev_id; ASSERT(cvd->vdev_parent == pvd); if (pvd == NULL) return; ASSERT(id < pvd->vdev_children); ASSERT(pvd->vdev_child[id] == cvd); pvd->vdev_child[id] = NULL; cvd->vdev_parent = NULL; for (c = 0; c < pvd->vdev_children; c++) if (pvd->vdev_child[c]) break; if (c == pvd->vdev_children) { kmem_free(pvd->vdev_child, c * sizeof (vdev_t *)); pvd->vdev_child = NULL; pvd->vdev_children = 0; } if (cvd->vdev_ops->vdev_op_leaf) { spa_t *spa = cvd->vdev_spa; list_remove(&spa->spa_leaf_list, cvd); spa->spa_leaf_list_gen++; } /* * Walk up all ancestors to update guid sum. */ for (; pvd != NULL; pvd = pvd->vdev_parent) pvd->vdev_guid_sum -= cvd->vdev_guid_sum; } /* * Remove any holes in the child array. */ void vdev_compact_children(vdev_t *pvd) { vdev_t **newchild, *cvd; int oldc = pvd->vdev_children; int newc; ASSERT(spa_config_held(pvd->vdev_spa, SCL_ALL, RW_WRITER) == SCL_ALL); if (oldc == 0) return; for (int c = newc = 0; c < oldc; c++) if (pvd->vdev_child[c]) newc++; if (newc > 0) { newchild = kmem_zalloc(newc * sizeof (vdev_t *), KM_SLEEP); for (int c = newc = 0; c < oldc; c++) { if ((cvd = pvd->vdev_child[c]) != NULL) { newchild[newc] = cvd; cvd->vdev_id = newc++; } } } else { newchild = NULL; } kmem_free(pvd->vdev_child, oldc * sizeof (vdev_t *)); pvd->vdev_child = newchild; pvd->vdev_children = newc; } /* * Allocate and minimally initialize a vdev_t. */ vdev_t * vdev_alloc_common(spa_t *spa, uint_t id, uint64_t guid, vdev_ops_t *ops) { vdev_t *vd; vdev_indirect_config_t *vic; vd = kmem_zalloc(sizeof (vdev_t), KM_SLEEP); vic = &vd->vdev_indirect_config; if (spa->spa_root_vdev == NULL) { ASSERT(ops == &vdev_root_ops); spa->spa_root_vdev = vd; spa->spa_load_guid = spa_generate_guid(NULL); } if (guid == 0 && ops != &vdev_hole_ops) { if (spa->spa_root_vdev == vd) { /* * The root vdev's guid will also be the pool guid, * which must be unique among all pools. */ guid = spa_generate_guid(NULL); } else { /* * Any other vdev's guid must be unique within the pool. */ guid = spa_generate_guid(spa); } ASSERT(!spa_guid_exists(spa_guid(spa), guid)); } vd->vdev_spa = spa; vd->vdev_id = id; vd->vdev_guid = guid; vd->vdev_guid_sum = guid; vd->vdev_ops = ops; vd->vdev_state = VDEV_STATE_CLOSED; vd->vdev_ishole = (ops == &vdev_hole_ops); vic->vic_prev_indirect_vdev = UINT64_MAX; rw_init(&vd->vdev_indirect_rwlock, NULL, RW_DEFAULT, NULL); mutex_init(&vd->vdev_obsolete_lock, NULL, MUTEX_DEFAULT, NULL); vd->vdev_obsolete_segments = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); /* * Initialize rate limit structs for events. We rate limit ZIO delay * and checksum events so that we don't overwhelm ZED with thousands * of events when a disk is acting up. */ zfs_ratelimit_init(&vd->vdev_delay_rl, &zfs_slow_io_events_per_second, 1); zfs_ratelimit_init(&vd->vdev_deadman_rl, &zfs_deadman_events_per_second, 1); zfs_ratelimit_init(&vd->vdev_checksum_rl, &zfs_checksum_events_per_second, 1); /* * Default Thresholds for tuning ZED */ vd->vdev_checksum_n = vdev_prop_default_numeric(VDEV_PROP_CHECKSUM_N); vd->vdev_checksum_t = vdev_prop_default_numeric(VDEV_PROP_CHECKSUM_T); vd->vdev_io_n = vdev_prop_default_numeric(VDEV_PROP_IO_N); vd->vdev_io_t = vdev_prop_default_numeric(VDEV_PROP_IO_T); vd->vdev_slow_io_n = vdev_prop_default_numeric(VDEV_PROP_SLOW_IO_N); vd->vdev_slow_io_t = vdev_prop_default_numeric(VDEV_PROP_SLOW_IO_T); list_link_init(&vd->vdev_config_dirty_node); list_link_init(&vd->vdev_state_dirty_node); list_link_init(&vd->vdev_initialize_node); list_link_init(&vd->vdev_leaf_node); list_link_init(&vd->vdev_trim_node); mutex_init(&vd->vdev_dtl_lock, NULL, MUTEX_NOLOCKDEP, NULL); mutex_init(&vd->vdev_stat_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&vd->vdev_probe_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&vd->vdev_scan_io_queue_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&vd->vdev_initialize_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&vd->vdev_initialize_io_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&vd->vdev_initialize_cv, NULL, CV_DEFAULT, NULL); cv_init(&vd->vdev_initialize_io_cv, NULL, CV_DEFAULT, NULL); mutex_init(&vd->vdev_trim_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&vd->vdev_autotrim_lock, NULL, MUTEX_DEFAULT, NULL); mutex_init(&vd->vdev_trim_io_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&vd->vdev_trim_cv, NULL, CV_DEFAULT, NULL); cv_init(&vd->vdev_autotrim_cv, NULL, CV_DEFAULT, NULL); cv_init(&vd->vdev_autotrim_kick_cv, NULL, CV_DEFAULT, NULL); cv_init(&vd->vdev_trim_io_cv, NULL, CV_DEFAULT, NULL); mutex_init(&vd->vdev_rebuild_lock, NULL, MUTEX_DEFAULT, NULL); cv_init(&vd->vdev_rebuild_cv, NULL, CV_DEFAULT, NULL); for (int t = 0; t < DTL_TYPES; t++) { vd->vdev_dtl[t] = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); } txg_list_create(&vd->vdev_ms_list, spa, offsetof(struct metaslab, ms_txg_node)); txg_list_create(&vd->vdev_dtl_list, spa, offsetof(struct vdev, vdev_dtl_node)); vd->vdev_stat.vs_timestamp = gethrtime(); vdev_queue_init(vd); return (vd); } /* * Allocate a new vdev. The 'alloctype' is used to control whether we are * creating a new vdev or loading an existing one - the behavior is slightly * different for each case. */ int vdev_alloc(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent, uint_t id, int alloctype) { vdev_ops_t *ops; const char *type; uint64_t guid = 0, islog; vdev_t *vd; vdev_indirect_config_t *vic; const char *tmp = NULL; int rc; vdev_alloc_bias_t alloc_bias = VDEV_BIAS_NONE; boolean_t top_level = (parent && !parent->vdev_parent); ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL); if (nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) != 0) return (SET_ERROR(EINVAL)); if ((ops = vdev_getops(type)) == NULL) return (SET_ERROR(EINVAL)); /* * If this is a load, get the vdev guid from the nvlist. * Otherwise, vdev_alloc_common() will generate one for us. */ if (alloctype == VDEV_ALLOC_LOAD) { uint64_t label_id; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_ID, &label_id) || label_id != id) return (SET_ERROR(EINVAL)); if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) != 0) return (SET_ERROR(EINVAL)); } else if (alloctype == VDEV_ALLOC_SPARE) { if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) != 0) return (SET_ERROR(EINVAL)); } else if (alloctype == VDEV_ALLOC_L2CACHE) { if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) != 0) return (SET_ERROR(EINVAL)); } else if (alloctype == VDEV_ALLOC_ROOTPOOL) { if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_GUID, &guid) != 0) return (SET_ERROR(EINVAL)); } /* * The first allocated vdev must be of type 'root'. */ if (ops != &vdev_root_ops && spa->spa_root_vdev == NULL) return (SET_ERROR(EINVAL)); /* * Determine whether we're a log vdev. */ islog = 0; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_LOG, &islog); if (islog && spa_version(spa) < SPA_VERSION_SLOGS) return (SET_ERROR(ENOTSUP)); if (ops == &vdev_hole_ops && spa_version(spa) < SPA_VERSION_HOLES) return (SET_ERROR(ENOTSUP)); if (top_level && alloctype == VDEV_ALLOC_ADD) { const char *bias; /* * If creating a top-level vdev, check for allocation * classes input. */ if (nvlist_lookup_string(nv, ZPOOL_CONFIG_ALLOCATION_BIAS, &bias) == 0) { alloc_bias = vdev_derive_alloc_bias(bias); /* spa_vdev_add() expects feature to be enabled */ if (spa->spa_load_state != SPA_LOAD_CREATE && !spa_feature_is_enabled(spa, SPA_FEATURE_ALLOCATION_CLASSES)) { return (SET_ERROR(ENOTSUP)); } } /* spa_vdev_add() expects feature to be enabled */ if (ops == &vdev_draid_ops && spa->spa_load_state != SPA_LOAD_CREATE && !spa_feature_is_enabled(spa, SPA_FEATURE_DRAID)) { return (SET_ERROR(ENOTSUP)); } } /* * Initialize the vdev specific data. This is done before calling * vdev_alloc_common() since it may fail and this simplifies the * error reporting and cleanup code paths. */ void *tsd = NULL; if (ops->vdev_op_init != NULL) { rc = ops->vdev_op_init(spa, nv, &tsd); if (rc != 0) { return (rc); } } vd = vdev_alloc_common(spa, id, guid, ops); vd->vdev_tsd = tsd; vd->vdev_islog = islog; if (top_level && alloc_bias != VDEV_BIAS_NONE) vd->vdev_alloc_bias = alloc_bias; if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &tmp) == 0) vd->vdev_path = spa_strdup(tmp); /* * ZPOOL_CONFIG_AUX_STATE = "external" means we previously forced a * fault on a vdev and want it to persist across imports (like with * zpool offline -f). */ rc = nvlist_lookup_string(nv, ZPOOL_CONFIG_AUX_STATE, &tmp); if (rc == 0 && tmp != NULL && strcmp(tmp, "external") == 0) { vd->vdev_stat.vs_aux = VDEV_AUX_EXTERNAL; vd->vdev_faulted = 1; vd->vdev_label_aux = VDEV_AUX_EXTERNAL; } if (nvlist_lookup_string(nv, ZPOOL_CONFIG_DEVID, &tmp) == 0) vd->vdev_devid = spa_strdup(tmp); if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PHYS_PATH, &tmp) == 0) vd->vdev_physpath = spa_strdup(tmp); if (nvlist_lookup_string(nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH, &tmp) == 0) vd->vdev_enc_sysfs_path = spa_strdup(tmp); if (nvlist_lookup_string(nv, ZPOOL_CONFIG_FRU, &tmp) == 0) vd->vdev_fru = spa_strdup(tmp); /* * Set the whole_disk property. If it's not specified, leave the value * as -1. */ if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &vd->vdev_wholedisk) != 0) vd->vdev_wholedisk = -1ULL; vic = &vd->vdev_indirect_config; ASSERT0(vic->vic_mapping_object); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_INDIRECT_OBJECT, &vic->vic_mapping_object); ASSERT0(vic->vic_births_object); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_INDIRECT_BIRTHS, &vic->vic_births_object); ASSERT3U(vic->vic_prev_indirect_vdev, ==, UINT64_MAX); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_PREV_INDIRECT_VDEV, &vic->vic_prev_indirect_vdev); /* * Look for the 'not present' flag. This will only be set if the device * was not present at the time of import. */ (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, &vd->vdev_not_present); /* * Get the alignment requirement. Ignore pool ashift for vdev * attach case. */ if (alloctype != VDEV_ALLOC_ATTACH) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_ASHIFT, &vd->vdev_ashift); } else { vd->vdev_attaching = B_TRUE; } /* * Retrieve the vdev creation time. */ (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_CREATE_TXG, &vd->vdev_crtxg); if (vd->vdev_ops == &vdev_root_ops && (alloctype == VDEV_ALLOC_LOAD || alloctype == VDEV_ALLOC_SPLIT || alloctype == VDEV_ALLOC_ROOTPOOL)) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_VDEV_ROOT_ZAP, &vd->vdev_root_zap); } /* * If we're a top-level vdev, try to load the allocation parameters. */ if (top_level && (alloctype == VDEV_ALLOC_LOAD || alloctype == VDEV_ALLOC_SPLIT)) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_METASLAB_ARRAY, &vd->vdev_ms_array); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_METASLAB_SHIFT, &vd->vdev_ms_shift); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_ASIZE, &vd->vdev_asize); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_NONALLOCATING, &vd->vdev_noalloc); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_REMOVING, &vd->vdev_removing); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_VDEV_TOP_ZAP, &vd->vdev_top_zap); vd->vdev_rz_expanding = nvlist_exists(nv, ZPOOL_CONFIG_RAIDZ_EXPANDING); } else { ASSERT0(vd->vdev_top_zap); } if (top_level && alloctype != VDEV_ALLOC_ATTACH) { ASSERT(alloctype == VDEV_ALLOC_LOAD || alloctype == VDEV_ALLOC_ADD || alloctype == VDEV_ALLOC_SPLIT || alloctype == VDEV_ALLOC_ROOTPOOL); /* Note: metaslab_group_create() is now deferred */ } if (vd->vdev_ops->vdev_op_leaf && (alloctype == VDEV_ALLOC_LOAD || alloctype == VDEV_ALLOC_SPLIT)) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_VDEV_LEAF_ZAP, &vd->vdev_leaf_zap); } else { ASSERT0(vd->vdev_leaf_zap); } /* * If we're a leaf vdev, try to load the DTL object and other state. */ if (vd->vdev_ops->vdev_op_leaf && (alloctype == VDEV_ALLOC_LOAD || alloctype == VDEV_ALLOC_L2CACHE || alloctype == VDEV_ALLOC_ROOTPOOL)) { if (alloctype == VDEV_ALLOC_LOAD) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_DTL, &vd->vdev_dtl_object); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_UNSPARE, &vd->vdev_unspare); } if (alloctype == VDEV_ALLOC_ROOTPOOL) { uint64_t spare = 0; if (nvlist_lookup_uint64(nv, ZPOOL_CONFIG_IS_SPARE, &spare) == 0 && spare) spa_spare_add(vd); } (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_OFFLINE, &vd->vdev_offline); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_RESILVER_TXG, &vd->vdev_resilver_txg); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_REBUILD_TXG, &vd->vdev_rebuild_txg); if (nvlist_exists(nv, ZPOOL_CONFIG_RESILVER_DEFER)) vdev_defer_resilver(vd); /* * In general, when importing a pool we want to ignore the * persistent fault state, as the diagnosis made on another * system may not be valid in the current context. The only * exception is if we forced a vdev to a persistently faulted * state with 'zpool offline -f'. The persistent fault will * remain across imports until cleared. * * Local vdevs will remain in the faulted state. */ if (spa_load_state(spa) == SPA_LOAD_OPEN || spa_load_state(spa) == SPA_LOAD_IMPORT) { (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_FAULTED, &vd->vdev_faulted); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_DEGRADED, &vd->vdev_degraded); (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_REMOVED, &vd->vdev_removed); if (vd->vdev_faulted || vd->vdev_degraded) { const char *aux; vd->vdev_label_aux = VDEV_AUX_ERR_EXCEEDED; if (nvlist_lookup_string(nv, ZPOOL_CONFIG_AUX_STATE, &aux) == 0 && strcmp(aux, "external") == 0) vd->vdev_label_aux = VDEV_AUX_EXTERNAL; else vd->vdev_faulted = 0ULL; } } } /* * Add ourselves to the parent's list of children. */ vdev_add_child(parent, vd); *vdp = vd; return (0); } void vdev_free(vdev_t *vd) { spa_t *spa = vd->vdev_spa; ASSERT3P(vd->vdev_initialize_thread, ==, NULL); ASSERT3P(vd->vdev_trim_thread, ==, NULL); ASSERT3P(vd->vdev_autotrim_thread, ==, NULL); ASSERT3P(vd->vdev_rebuild_thread, ==, NULL); /* * Scan queues are normally destroyed at the end of a scan. If the * queue exists here, that implies the vdev is being removed while * the scan is still running. */ if (vd->vdev_scan_io_queue != NULL) { mutex_enter(&vd->vdev_scan_io_queue_lock); dsl_scan_io_queue_destroy(vd->vdev_scan_io_queue); vd->vdev_scan_io_queue = NULL; mutex_exit(&vd->vdev_scan_io_queue_lock); } /* * vdev_free() implies closing the vdev first. This is simpler than * trying to ensure complicated semantics for all callers. */ vdev_close(vd); ASSERT(!list_link_active(&vd->vdev_config_dirty_node)); ASSERT(!list_link_active(&vd->vdev_state_dirty_node)); /* * Free all children. */ for (int c = 0; c < vd->vdev_children; c++) vdev_free(vd->vdev_child[c]); ASSERT(vd->vdev_child == NULL); ASSERT(vd->vdev_guid_sum == vd->vdev_guid); if (vd->vdev_ops->vdev_op_fini != NULL) vd->vdev_ops->vdev_op_fini(vd); /* * Discard allocation state. */ if (vd->vdev_mg != NULL) { vdev_metaslab_fini(vd); metaslab_group_destroy(vd->vdev_mg); vd->vdev_mg = NULL; } if (vd->vdev_log_mg != NULL) { ASSERT0(vd->vdev_ms_count); metaslab_group_destroy(vd->vdev_log_mg); vd->vdev_log_mg = NULL; } ASSERT0(vd->vdev_stat.vs_space); ASSERT0(vd->vdev_stat.vs_dspace); ASSERT0(vd->vdev_stat.vs_alloc); /* * Remove this vdev from its parent's child list. */ vdev_remove_child(vd->vdev_parent, vd); ASSERT(vd->vdev_parent == NULL); ASSERT(!list_link_active(&vd->vdev_leaf_node)); /* * Clean up vdev structure. */ vdev_queue_fini(vd); if (vd->vdev_path) spa_strfree(vd->vdev_path); if (vd->vdev_devid) spa_strfree(vd->vdev_devid); if (vd->vdev_physpath) spa_strfree(vd->vdev_physpath); if (vd->vdev_enc_sysfs_path) spa_strfree(vd->vdev_enc_sysfs_path); if (vd->vdev_fru) spa_strfree(vd->vdev_fru); if (vd->vdev_isspare) spa_spare_remove(vd); if (vd->vdev_isl2cache) spa_l2cache_remove(vd); txg_list_destroy(&vd->vdev_ms_list); txg_list_destroy(&vd->vdev_dtl_list); mutex_enter(&vd->vdev_dtl_lock); space_map_close(vd->vdev_dtl_sm); for (int t = 0; t < DTL_TYPES; t++) { range_tree_vacate(vd->vdev_dtl[t], NULL, NULL); range_tree_destroy(vd->vdev_dtl[t]); } mutex_exit(&vd->vdev_dtl_lock); EQUIV(vd->vdev_indirect_births != NULL, vd->vdev_indirect_mapping != NULL); if (vd->vdev_indirect_births != NULL) { vdev_indirect_mapping_close(vd->vdev_indirect_mapping); vdev_indirect_births_close(vd->vdev_indirect_births); } if (vd->vdev_obsolete_sm != NULL) { ASSERT(vd->vdev_removing || vd->vdev_ops == &vdev_indirect_ops); space_map_close(vd->vdev_obsolete_sm); vd->vdev_obsolete_sm = NULL; } range_tree_destroy(vd->vdev_obsolete_segments); rw_destroy(&vd->vdev_indirect_rwlock); mutex_destroy(&vd->vdev_obsolete_lock); mutex_destroy(&vd->vdev_dtl_lock); mutex_destroy(&vd->vdev_stat_lock); mutex_destroy(&vd->vdev_probe_lock); mutex_destroy(&vd->vdev_scan_io_queue_lock); mutex_destroy(&vd->vdev_initialize_lock); mutex_destroy(&vd->vdev_initialize_io_lock); cv_destroy(&vd->vdev_initialize_io_cv); cv_destroy(&vd->vdev_initialize_cv); mutex_destroy(&vd->vdev_trim_lock); mutex_destroy(&vd->vdev_autotrim_lock); mutex_destroy(&vd->vdev_trim_io_lock); cv_destroy(&vd->vdev_trim_cv); cv_destroy(&vd->vdev_autotrim_cv); cv_destroy(&vd->vdev_autotrim_kick_cv); cv_destroy(&vd->vdev_trim_io_cv); mutex_destroy(&vd->vdev_rebuild_lock); cv_destroy(&vd->vdev_rebuild_cv); zfs_ratelimit_fini(&vd->vdev_delay_rl); zfs_ratelimit_fini(&vd->vdev_deadman_rl); zfs_ratelimit_fini(&vd->vdev_checksum_rl); if (vd == spa->spa_root_vdev) spa->spa_root_vdev = NULL; kmem_free(vd, sizeof (vdev_t)); } /* * Transfer top-level vdev state from svd to tvd. */ static void vdev_top_transfer(vdev_t *svd, vdev_t *tvd) { spa_t *spa = svd->vdev_spa; metaslab_t *msp; vdev_t *vd; int t; ASSERT(tvd == tvd->vdev_top); tvd->vdev_ms_array = svd->vdev_ms_array; tvd->vdev_ms_shift = svd->vdev_ms_shift; tvd->vdev_ms_count = svd->vdev_ms_count; tvd->vdev_top_zap = svd->vdev_top_zap; svd->vdev_ms_array = 0; svd->vdev_ms_shift = 0; svd->vdev_ms_count = 0; svd->vdev_top_zap = 0; if (tvd->vdev_mg) ASSERT3P(tvd->vdev_mg, ==, svd->vdev_mg); if (tvd->vdev_log_mg) ASSERT3P(tvd->vdev_log_mg, ==, svd->vdev_log_mg); tvd->vdev_mg = svd->vdev_mg; tvd->vdev_log_mg = svd->vdev_log_mg; tvd->vdev_ms = svd->vdev_ms; svd->vdev_mg = NULL; svd->vdev_log_mg = NULL; svd->vdev_ms = NULL; if (tvd->vdev_mg != NULL) tvd->vdev_mg->mg_vd = tvd; if (tvd->vdev_log_mg != NULL) tvd->vdev_log_mg->mg_vd = tvd; tvd->vdev_checkpoint_sm = svd->vdev_checkpoint_sm; svd->vdev_checkpoint_sm = NULL; tvd->vdev_alloc_bias = svd->vdev_alloc_bias; svd->vdev_alloc_bias = VDEV_BIAS_NONE; tvd->vdev_stat.vs_alloc = svd->vdev_stat.vs_alloc; tvd->vdev_stat.vs_space = svd->vdev_stat.vs_space; tvd->vdev_stat.vs_dspace = svd->vdev_stat.vs_dspace; svd->vdev_stat.vs_alloc = 0; svd->vdev_stat.vs_space = 0; svd->vdev_stat.vs_dspace = 0; /* * State which may be set on a top-level vdev that's in the * process of being removed. */ ASSERT0(tvd->vdev_indirect_config.vic_births_object); ASSERT0(tvd->vdev_indirect_config.vic_mapping_object); ASSERT3U(tvd->vdev_indirect_config.vic_prev_indirect_vdev, ==, -1ULL); ASSERT3P(tvd->vdev_indirect_mapping, ==, NULL); ASSERT3P(tvd->vdev_indirect_births, ==, NULL); ASSERT3P(tvd->vdev_obsolete_sm, ==, NULL); ASSERT0(tvd->vdev_noalloc); ASSERT0(tvd->vdev_removing); ASSERT0(tvd->vdev_rebuilding); tvd->vdev_noalloc = svd->vdev_noalloc; tvd->vdev_removing = svd->vdev_removing; tvd->vdev_rebuilding = svd->vdev_rebuilding; tvd->vdev_rebuild_config = svd->vdev_rebuild_config; tvd->vdev_indirect_config = svd->vdev_indirect_config; tvd->vdev_indirect_mapping = svd->vdev_indirect_mapping; tvd->vdev_indirect_births = svd->vdev_indirect_births; range_tree_swap(&svd->vdev_obsolete_segments, &tvd->vdev_obsolete_segments); tvd->vdev_obsolete_sm = svd->vdev_obsolete_sm; svd->vdev_indirect_config.vic_mapping_object = 0; svd->vdev_indirect_config.vic_births_object = 0; svd->vdev_indirect_config.vic_prev_indirect_vdev = -1ULL; svd->vdev_indirect_mapping = NULL; svd->vdev_indirect_births = NULL; svd->vdev_obsolete_sm = NULL; svd->vdev_noalloc = 0; svd->vdev_removing = 0; svd->vdev_rebuilding = 0; for (t = 0; t < TXG_SIZE; t++) { while ((msp = txg_list_remove(&svd->vdev_ms_list, t)) != NULL) (void) txg_list_add(&tvd->vdev_ms_list, msp, t); while ((vd = txg_list_remove(&svd->vdev_dtl_list, t)) != NULL) (void) txg_list_add(&tvd->vdev_dtl_list, vd, t); if (txg_list_remove_this(&spa->spa_vdev_txg_list, svd, t)) (void) txg_list_add(&spa->spa_vdev_txg_list, tvd, t); } if (list_link_active(&svd->vdev_config_dirty_node)) { vdev_config_clean(svd); vdev_config_dirty(tvd); } if (list_link_active(&svd->vdev_state_dirty_node)) { vdev_state_clean(svd); vdev_state_dirty(tvd); } tvd->vdev_deflate_ratio = svd->vdev_deflate_ratio; svd->vdev_deflate_ratio = 0; tvd->vdev_islog = svd->vdev_islog; svd->vdev_islog = 0; dsl_scan_io_queue_vdev_xfer(svd, tvd); } static void vdev_top_update(vdev_t *tvd, vdev_t *vd) { if (vd == NULL) return; vd->vdev_top = tvd; for (int c = 0; c < vd->vdev_children; c++) vdev_top_update(tvd, vd->vdev_child[c]); } /* * Add a mirror/replacing vdev above an existing vdev. There is no need to * call .vdev_op_init() since mirror/replacing vdevs do not have private state. */ vdev_t * vdev_add_parent(vdev_t *cvd, vdev_ops_t *ops) { spa_t *spa = cvd->vdev_spa; vdev_t *pvd = cvd->vdev_parent; vdev_t *mvd; ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL); mvd = vdev_alloc_common(spa, cvd->vdev_id, 0, ops); mvd->vdev_asize = cvd->vdev_asize; mvd->vdev_min_asize = cvd->vdev_min_asize; mvd->vdev_max_asize = cvd->vdev_max_asize; mvd->vdev_psize = cvd->vdev_psize; mvd->vdev_ashift = cvd->vdev_ashift; mvd->vdev_logical_ashift = cvd->vdev_logical_ashift; mvd->vdev_physical_ashift = cvd->vdev_physical_ashift; mvd->vdev_state = cvd->vdev_state; mvd->vdev_crtxg = cvd->vdev_crtxg; vdev_remove_child(pvd, cvd); vdev_add_child(pvd, mvd); cvd->vdev_id = mvd->vdev_children; vdev_add_child(mvd, cvd); vdev_top_update(cvd->vdev_top, cvd->vdev_top); if (mvd == mvd->vdev_top) vdev_top_transfer(cvd, mvd); return (mvd); } /* * Remove a 1-way mirror/replacing vdev from the tree. */ void vdev_remove_parent(vdev_t *cvd) { vdev_t *mvd = cvd->vdev_parent; vdev_t *pvd = mvd->vdev_parent; ASSERT(spa_config_held(cvd->vdev_spa, SCL_ALL, RW_WRITER) == SCL_ALL); ASSERT(mvd->vdev_children == 1); ASSERT(mvd->vdev_ops == &vdev_mirror_ops || mvd->vdev_ops == &vdev_replacing_ops || mvd->vdev_ops == &vdev_spare_ops); cvd->vdev_ashift = mvd->vdev_ashift; cvd->vdev_logical_ashift = mvd->vdev_logical_ashift; cvd->vdev_physical_ashift = mvd->vdev_physical_ashift; vdev_remove_child(mvd, cvd); vdev_remove_child(pvd, mvd); /* * If cvd will replace mvd as a top-level vdev, preserve mvd's guid. * Otherwise, we could have detached an offline device, and when we * go to import the pool we'll think we have two top-level vdevs, * instead of a different version of the same top-level vdev. */ if (mvd->vdev_top == mvd) { uint64_t guid_delta = mvd->vdev_guid - cvd->vdev_guid; cvd->vdev_orig_guid = cvd->vdev_guid; cvd->vdev_guid += guid_delta; cvd->vdev_guid_sum += guid_delta; /* * If pool not set for autoexpand, we need to also preserve * mvd's asize to prevent automatic expansion of cvd. * Otherwise if we are adjusting the mirror by attaching and * detaching children of non-uniform sizes, the mirror could * autoexpand, unexpectedly requiring larger devices to * re-establish the mirror. */ if (!cvd->vdev_spa->spa_autoexpand) cvd->vdev_asize = mvd->vdev_asize; } cvd->vdev_id = mvd->vdev_id; vdev_add_child(pvd, cvd); vdev_top_update(cvd->vdev_top, cvd->vdev_top); if (cvd == cvd->vdev_top) vdev_top_transfer(mvd, cvd); ASSERT(mvd->vdev_children == 0); vdev_free(mvd); } /* * Choose GCD for spa_gcd_alloc. */ static uint64_t vdev_gcd(uint64_t a, uint64_t b) { while (b != 0) { uint64_t t = b; b = a % b; a = t; } return (a); } /* * Set spa_min_alloc and spa_gcd_alloc. */ static void vdev_spa_set_alloc(spa_t *spa, uint64_t min_alloc) { if (min_alloc < spa->spa_min_alloc) spa->spa_min_alloc = min_alloc; if (spa->spa_gcd_alloc == INT_MAX) { spa->spa_gcd_alloc = min_alloc; } else { spa->spa_gcd_alloc = vdev_gcd(min_alloc, spa->spa_gcd_alloc); } } void vdev_metaslab_group_create(vdev_t *vd) { spa_t *spa = vd->vdev_spa; /* * metaslab_group_create was delayed until allocation bias was available */ if (vd->vdev_mg == NULL) { metaslab_class_t *mc; if (vd->vdev_islog && vd->vdev_alloc_bias == VDEV_BIAS_NONE) vd->vdev_alloc_bias = VDEV_BIAS_LOG; ASSERT3U(vd->vdev_islog, ==, (vd->vdev_alloc_bias == VDEV_BIAS_LOG)); switch (vd->vdev_alloc_bias) { case VDEV_BIAS_LOG: mc = spa_log_class(spa); break; case VDEV_BIAS_SPECIAL: mc = spa_special_class(spa); break; case VDEV_BIAS_DEDUP: mc = spa_dedup_class(spa); break; default: mc = spa_normal_class(spa); } vd->vdev_mg = metaslab_group_create(mc, vd, spa->spa_alloc_count); if (!vd->vdev_islog) { vd->vdev_log_mg = metaslab_group_create( spa_embedded_log_class(spa), vd, 1); } /* * The spa ashift min/max only apply for the normal metaslab * class. Class destination is late binding so ashift boundary * setting had to wait until now. */ if (vd->vdev_top == vd && vd->vdev_ashift != 0 && mc == spa_normal_class(spa) && vd->vdev_aux == NULL) { if (vd->vdev_ashift > spa->spa_max_ashift) spa->spa_max_ashift = vd->vdev_ashift; if (vd->vdev_ashift < spa->spa_min_ashift) spa->spa_min_ashift = vd->vdev_ashift; uint64_t min_alloc = vdev_get_min_alloc(vd); vdev_spa_set_alloc(spa, min_alloc); } } } int vdev_metaslab_init(vdev_t *vd, uint64_t txg) { spa_t *spa = vd->vdev_spa; uint64_t oldc = vd->vdev_ms_count; uint64_t newc = vd->vdev_asize >> vd->vdev_ms_shift; metaslab_t **mspp; int error; boolean_t expanding = (oldc != 0); ASSERT(txg == 0 || spa_config_held(spa, SCL_ALLOC, RW_WRITER)); /* * This vdev is not being allocated from yet or is a hole. */ if (vd->vdev_ms_shift == 0) return (0); ASSERT(!vd->vdev_ishole); ASSERT(oldc <= newc); mspp = vmem_zalloc(newc * sizeof (*mspp), KM_SLEEP); if (expanding) { memcpy(mspp, vd->vdev_ms, oldc * sizeof (*mspp)); vmem_free(vd->vdev_ms, oldc * sizeof (*mspp)); } vd->vdev_ms = mspp; vd->vdev_ms_count = newc; for (uint64_t m = oldc; m < newc; m++) { uint64_t object = 0; /* * vdev_ms_array may be 0 if we are creating the "fake" * metaslabs for an indirect vdev for zdb's leak detection. * See zdb_leak_init(). */ if (txg == 0 && vd->vdev_ms_array != 0) { error = dmu_read(spa->spa_meta_objset, vd->vdev_ms_array, m * sizeof (uint64_t), sizeof (uint64_t), &object, DMU_READ_PREFETCH); if (error != 0) { vdev_dbgmsg(vd, "unable to read the metaslab " "array [error=%d]", error); return (error); } } error = metaslab_init(vd->vdev_mg, m, object, txg, &(vd->vdev_ms[m])); if (error != 0) { vdev_dbgmsg(vd, "metaslab_init failed [error=%d]", error); return (error); } } /* * Find the emptiest metaslab on the vdev and mark it for use for * embedded slog by moving it from the regular to the log metaslab * group. */ if (vd->vdev_mg->mg_class == spa_normal_class(spa) && vd->vdev_ms_count > zfs_embedded_slog_min_ms && avl_is_empty(&vd->vdev_log_mg->mg_metaslab_tree)) { uint64_t slog_msid = 0; uint64_t smallest = UINT64_MAX; /* * Note, we only search the new metaslabs, because the old * (pre-existing) ones may be active (e.g. have non-empty * range_tree's), and we don't move them to the new * metaslab_t. */ for (uint64_t m = oldc; m < newc; m++) { uint64_t alloc = space_map_allocated(vd->vdev_ms[m]->ms_sm); if (alloc < smallest) { slog_msid = m; smallest = alloc; } } metaslab_t *slog_ms = vd->vdev_ms[slog_msid]; /* * The metaslab was marked as dirty at the end of * metaslab_init(). Remove it from the dirty list so that we * can uninitialize and reinitialize it to the new class. */ if (txg != 0) { (void) txg_list_remove_this(&vd->vdev_ms_list, slog_ms, txg); } uint64_t sm_obj = space_map_object(slog_ms->ms_sm); metaslab_fini(slog_ms); VERIFY0(metaslab_init(vd->vdev_log_mg, slog_msid, sm_obj, txg, &vd->vdev_ms[slog_msid])); } if (txg == 0) spa_config_enter(spa, SCL_ALLOC, FTAG, RW_WRITER); /* * If the vdev is marked as non-allocating then don't * activate the metaslabs since we want to ensure that * no allocations are performed on this device. */ if (vd->vdev_noalloc) { /* track non-allocating vdev space */ spa->spa_nonallocating_dspace += spa_deflate(spa) ? vd->vdev_stat.vs_dspace : vd->vdev_stat.vs_space; } else if (!expanding) { metaslab_group_activate(vd->vdev_mg); if (vd->vdev_log_mg != NULL) metaslab_group_activate(vd->vdev_log_mg); } if (txg == 0) spa_config_exit(spa, SCL_ALLOC, FTAG); return (0); } void vdev_metaslab_fini(vdev_t *vd) { if (vd->vdev_checkpoint_sm != NULL) { ASSERT(spa_feature_is_active(vd->vdev_spa, SPA_FEATURE_POOL_CHECKPOINT)); space_map_close(vd->vdev_checkpoint_sm); /* * Even though we close the space map, we need to set its * pointer to NULL. The reason is that vdev_metaslab_fini() * may be called multiple times for certain operations * (i.e. when destroying a pool) so we need to ensure that * this clause never executes twice. This logic is similar * to the one used for the vdev_ms clause below. */ vd->vdev_checkpoint_sm = NULL; } if (vd->vdev_ms != NULL) { metaslab_group_t *mg = vd->vdev_mg; metaslab_group_passivate(mg); if (vd->vdev_log_mg != NULL) { ASSERT(!vd->vdev_islog); metaslab_group_passivate(vd->vdev_log_mg); } uint64_t count = vd->vdev_ms_count; for (uint64_t m = 0; m < count; m++) { metaslab_t *msp = vd->vdev_ms[m]; if (msp != NULL) metaslab_fini(msp); } vmem_free(vd->vdev_ms, count * sizeof (metaslab_t *)); vd->vdev_ms = NULL; vd->vdev_ms_count = 0; for (int i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i++) { ASSERT0(mg->mg_histogram[i]); if (vd->vdev_log_mg != NULL) ASSERT0(vd->vdev_log_mg->mg_histogram[i]); } } ASSERT0(vd->vdev_ms_count); } typedef struct vdev_probe_stats { boolean_t vps_readable; boolean_t vps_writeable; boolean_t vps_zio_done_probe; int vps_flags; } vdev_probe_stats_t; static void vdev_probe_done(zio_t *zio) { spa_t *spa = zio->io_spa; vdev_t *vd = zio->io_vd; vdev_probe_stats_t *vps = zio->io_private; ASSERT(vd->vdev_probe_zio != NULL); if (zio->io_type == ZIO_TYPE_READ) { if (zio->io_error == 0) vps->vps_readable = 1; if (zio->io_error == 0 && spa_writeable(spa)) { zio_nowait(zio_write_phys(vd->vdev_probe_zio, vd, zio->io_offset, zio->io_size, zio->io_abd, ZIO_CHECKSUM_OFF, vdev_probe_done, vps, ZIO_PRIORITY_SYNC_WRITE, vps->vps_flags, B_TRUE)); } else { abd_free(zio->io_abd); } } else if (zio->io_type == ZIO_TYPE_WRITE) { if (zio->io_error == 0) vps->vps_writeable = 1; abd_free(zio->io_abd); } else if (zio->io_type == ZIO_TYPE_NULL) { zio_t *pio; zio_link_t *zl; vd->vdev_cant_read |= !vps->vps_readable; vd->vdev_cant_write |= !vps->vps_writeable; vdev_dbgmsg(vd, "probe done, cant_read=%u cant_write=%u", vd->vdev_cant_read, vd->vdev_cant_write); if (vdev_readable(vd) && (vdev_writeable(vd) || !spa_writeable(spa))) { zio->io_error = 0; } else { ASSERT(zio->io_error != 0); vdev_dbgmsg(vd, "failed probe"); (void) zfs_ereport_post(FM_EREPORT_ZFS_PROBE_FAILURE, spa, vd, NULL, NULL, 0); zio->io_error = SET_ERROR(ENXIO); /* * If this probe was initiated from zio pipeline, then * change the state in a spa_async_request. Probes that * were initiated from a vdev_open can change the state * as part of the open call. */ if (vps->vps_zio_done_probe) { vd->vdev_fault_wanted = B_TRUE; spa_async_request(spa, SPA_ASYNC_FAULT_VDEV); } } mutex_enter(&vd->vdev_probe_lock); ASSERT(vd->vdev_probe_zio == zio); vd->vdev_probe_zio = NULL; mutex_exit(&vd->vdev_probe_lock); zl = NULL; while ((pio = zio_walk_parents(zio, &zl)) != NULL) if (!vdev_accessible(vd, pio)) pio->io_error = SET_ERROR(ENXIO); kmem_free(vps, sizeof (*vps)); } } /* * Determine whether this device is accessible. * * Read and write to several known locations: the pad regions of each * vdev label but the first, which we leave alone in case it contains * a VTOC. */ zio_t * vdev_probe(vdev_t *vd, zio_t *zio) { spa_t *spa = vd->vdev_spa; vdev_probe_stats_t *vps = NULL; zio_t *pio; ASSERT(vd->vdev_ops->vdev_op_leaf); /* * Don't probe the probe. */ if (zio && (zio->io_flags & ZIO_FLAG_PROBE)) return (NULL); /* * To prevent 'probe storms' when a device fails, we create * just one probe i/o at a time. All zios that want to probe * this vdev will become parents of the probe io. */ mutex_enter(&vd->vdev_probe_lock); if ((pio = vd->vdev_probe_zio) == NULL) { vps = kmem_zalloc(sizeof (*vps), KM_SLEEP); vps->vps_flags = ZIO_FLAG_CANFAIL | ZIO_FLAG_PROBE | ZIO_FLAG_DONT_AGGREGATE | ZIO_FLAG_TRYHARD; vps->vps_zio_done_probe = (zio != NULL); if (spa_config_held(spa, SCL_ZIO, RW_WRITER)) { /* * vdev_cant_read and vdev_cant_write can only * transition from TRUE to FALSE when we have the * SCL_ZIO lock as writer; otherwise they can only * transition from FALSE to TRUE. This ensures that * any zio looking at these values can assume that * failures persist for the life of the I/O. That's * important because when a device has intermittent * connectivity problems, we want to ensure that * they're ascribed to the device (ENXIO) and not * the zio (EIO). * * Since we hold SCL_ZIO as writer here, clear both * values so the probe can reevaluate from first * principles. */ vps->vps_flags |= ZIO_FLAG_CONFIG_WRITER; vd->vdev_cant_read = B_FALSE; vd->vdev_cant_write = B_FALSE; } vd->vdev_probe_zio = pio = zio_null(NULL, spa, vd, vdev_probe_done, vps, vps->vps_flags | ZIO_FLAG_DONT_PROPAGATE); } if (zio != NULL) zio_add_child(zio, pio); mutex_exit(&vd->vdev_probe_lock); if (vps == NULL) { ASSERT(zio != NULL); return (NULL); } for (int l = 1; l < VDEV_LABELS; l++) { zio_nowait(zio_read_phys(pio, vd, vdev_label_offset(vd->vdev_psize, l, offsetof(vdev_label_t, vl_be)), VDEV_PAD_SIZE, abd_alloc_for_io(VDEV_PAD_SIZE, B_TRUE), ZIO_CHECKSUM_OFF, vdev_probe_done, vps, ZIO_PRIORITY_SYNC_READ, vps->vps_flags, B_TRUE)); } if (zio == NULL) return (pio); zio_nowait(pio); return (NULL); } static void vdev_load_child(void *arg) { vdev_t *vd = arg; vd->vdev_load_error = vdev_load(vd); } static void vdev_open_child(void *arg) { vdev_t *vd = arg; vd->vdev_open_thread = curthread; vd->vdev_open_error = vdev_open(vd); vd->vdev_open_thread = NULL; } static boolean_t vdev_uses_zvols(vdev_t *vd) { #ifdef _KERNEL if (zvol_is_zvol(vd->vdev_path)) return (B_TRUE); #endif for (int c = 0; c < vd->vdev_children; c++) if (vdev_uses_zvols(vd->vdev_child[c])) return (B_TRUE); return (B_FALSE); } /* * Returns B_TRUE if the passed child should be opened. */ static boolean_t vdev_default_open_children_func(vdev_t *vd) { (void) vd; return (B_TRUE); } /* * Open the requested child vdevs. If any of the leaf vdevs are using * a ZFS volume then do the opens in a single thread. This avoids a * deadlock when the current thread is holding the spa_namespace_lock. */ static void vdev_open_children_impl(vdev_t *vd, vdev_open_children_func_t *open_func) { int children = vd->vdev_children; taskq_t *tq = taskq_create("vdev_open", children, minclsyspri, children, children, TASKQ_PREPOPULATE); vd->vdev_nonrot = B_TRUE; for (int c = 0; c < children; c++) { vdev_t *cvd = vd->vdev_child[c]; if (open_func(cvd) == B_FALSE) continue; if (tq == NULL || vdev_uses_zvols(vd)) { cvd->vdev_open_error = vdev_open(cvd); } else { VERIFY(taskq_dispatch(tq, vdev_open_child, cvd, TQ_SLEEP) != TASKQID_INVALID); } vd->vdev_nonrot &= cvd->vdev_nonrot; } if (tq != NULL) { taskq_wait(tq); taskq_destroy(tq); } } /* * Open all child vdevs. */ void vdev_open_children(vdev_t *vd) { vdev_open_children_impl(vd, vdev_default_open_children_func); } /* * Conditionally open a subset of child vdevs. */ void vdev_open_children_subset(vdev_t *vd, vdev_open_children_func_t *open_func) { vdev_open_children_impl(vd, open_func); } /* * Compute the raidz-deflation ratio. Note, we hard-code 128k (1 << 17) * because it is the "typical" blocksize. Even though SPA_MAXBLOCKSIZE * changed, this algorithm can not change, otherwise it would inconsistently * account for existing bp's. We also hard-code txg 0 for the same reason * since expanded RAIDZ vdevs can use a different asize for different birth * txg's. */ static void vdev_set_deflate_ratio(vdev_t *vd) { if (vd == vd->vdev_top && !vd->vdev_ishole && vd->vdev_ashift != 0) { vd->vdev_deflate_ratio = (1 << 17) / (vdev_psize_to_asize_txg(vd, 1 << 17, 0) >> SPA_MINBLOCKSHIFT); } } /* * Choose the best of two ashifts, preferring one between logical ashift * (absolute minimum) and administrator defined maximum, otherwise take * the biggest of the two. */ uint64_t vdev_best_ashift(uint64_t logical, uint64_t a, uint64_t b) { if (a > logical && a <= zfs_vdev_max_auto_ashift) { if (b <= logical || b > zfs_vdev_max_auto_ashift) return (a); else return (MAX(a, b)); } else if (b <= logical || b > zfs_vdev_max_auto_ashift) return (MAX(a, b)); return (b); } /* * Maximize performance by inflating the configured ashift for top level * vdevs to be as close to the physical ashift as possible while maintaining * administrator defined limits and ensuring it doesn't go below the * logical ashift. */ static void vdev_ashift_optimize(vdev_t *vd) { ASSERT(vd == vd->vdev_top); if (vd->vdev_ashift < vd->vdev_physical_ashift && vd->vdev_physical_ashift <= zfs_vdev_max_auto_ashift) { vd->vdev_ashift = MIN( MAX(zfs_vdev_max_auto_ashift, vd->vdev_ashift), MAX(zfs_vdev_min_auto_ashift, vd->vdev_physical_ashift)); } else { /* * If the logical and physical ashifts are the same, then * we ensure that the top-level vdev's ashift is not smaller * than our minimum ashift value. For the unusual case * where logical ashift > physical ashift, we can't cap * the calculated ashift based on max ashift as that * would cause failures. * We still check if we need to increase it to match * the min ashift. */ vd->vdev_ashift = MAX(zfs_vdev_min_auto_ashift, vd->vdev_ashift); } } /* * Prepare a virtual device for access. */ int vdev_open(vdev_t *vd) { spa_t *spa = vd->vdev_spa; int error; uint64_t osize = 0; uint64_t max_osize = 0; uint64_t asize, max_asize, psize; uint64_t logical_ashift = 0; uint64_t physical_ashift = 0; ASSERT(vd->vdev_open_thread == curthread || spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL); ASSERT(vd->vdev_state == VDEV_STATE_CLOSED || vd->vdev_state == VDEV_STATE_CANT_OPEN || vd->vdev_state == VDEV_STATE_OFFLINE); vd->vdev_stat.vs_aux = VDEV_AUX_NONE; vd->vdev_cant_read = B_FALSE; vd->vdev_cant_write = B_FALSE; vd->vdev_fault_wanted = B_FALSE; vd->vdev_min_asize = vdev_get_min_asize(vd); /* * If this vdev is not removed, check its fault status. If it's * faulted, bail out of the open. */ if (!vd->vdev_removed && vd->vdev_faulted) { ASSERT(vd->vdev_children == 0); ASSERT(vd->vdev_label_aux == VDEV_AUX_ERR_EXCEEDED || vd->vdev_label_aux == VDEV_AUX_EXTERNAL); vdev_set_state(vd, B_TRUE, VDEV_STATE_FAULTED, vd->vdev_label_aux); return (SET_ERROR(ENXIO)); } else if (vd->vdev_offline) { ASSERT(vd->vdev_children == 0); vdev_set_state(vd, B_TRUE, VDEV_STATE_OFFLINE, VDEV_AUX_NONE); return (SET_ERROR(ENXIO)); } error = vd->vdev_ops->vdev_op_open(vd, &osize, &max_osize, &logical_ashift, &physical_ashift); /* Keep the device in removed state if unplugged */ if (error == ENOENT && vd->vdev_removed) { vdev_set_state(vd, B_TRUE, VDEV_STATE_REMOVED, VDEV_AUX_NONE); return (error); } /* * Physical volume size should never be larger than its max size, unless * the disk has shrunk while we were reading it or the device is buggy * or damaged: either way it's not safe for use, bail out of the open. */ if (osize > max_osize) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_OPEN_FAILED); return (SET_ERROR(ENXIO)); } /* * Reset the vdev_reopening flag so that we actually close * the vdev on error. */ vd->vdev_reopening = B_FALSE; if (zio_injection_enabled && error == 0) error = zio_handle_device_injection(vd, NULL, SET_ERROR(ENXIO)); if (error) { if (vd->vdev_removed && vd->vdev_stat.vs_aux != VDEV_AUX_OPEN_FAILED) vd->vdev_removed = B_FALSE; if (vd->vdev_stat.vs_aux == VDEV_AUX_CHILDREN_OFFLINE) { vdev_set_state(vd, B_TRUE, VDEV_STATE_OFFLINE, vd->vdev_stat.vs_aux); } else { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, vd->vdev_stat.vs_aux); } return (error); } vd->vdev_removed = B_FALSE; /* * Recheck the faulted flag now that we have confirmed that * the vdev is accessible. If we're faulted, bail. */ if (vd->vdev_faulted) { ASSERT(vd->vdev_children == 0); ASSERT(vd->vdev_label_aux == VDEV_AUX_ERR_EXCEEDED || vd->vdev_label_aux == VDEV_AUX_EXTERNAL); vdev_set_state(vd, B_TRUE, VDEV_STATE_FAULTED, vd->vdev_label_aux); return (SET_ERROR(ENXIO)); } if (vd->vdev_degraded) { ASSERT(vd->vdev_children == 0); vdev_set_state(vd, B_TRUE, VDEV_STATE_DEGRADED, VDEV_AUX_ERR_EXCEEDED); } else { vdev_set_state(vd, B_TRUE, VDEV_STATE_HEALTHY, 0); } /* * For hole or missing vdevs we just return success. */ if (vd->vdev_ishole || vd->vdev_ops == &vdev_missing_ops) return (0); for (int c = 0; c < vd->vdev_children; c++) { if (vd->vdev_child[c]->vdev_state != VDEV_STATE_HEALTHY) { vdev_set_state(vd, B_TRUE, VDEV_STATE_DEGRADED, VDEV_AUX_NONE); break; } } osize = P2ALIGN_TYPED(osize, sizeof (vdev_label_t), uint64_t); max_osize = P2ALIGN_TYPED(max_osize, sizeof (vdev_label_t), uint64_t); if (vd->vdev_children == 0) { if (osize < SPA_MINDEVSIZE) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_TOO_SMALL); return (SET_ERROR(EOVERFLOW)); } psize = osize; asize = osize - (VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE); max_asize = max_osize - (VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE); } else { if (vd->vdev_parent != NULL && osize < SPA_MINDEVSIZE - (VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE)) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_TOO_SMALL); return (SET_ERROR(EOVERFLOW)); } psize = 0; asize = osize; max_asize = max_osize; } /* * If the vdev was expanded, record this so that we can re-create the * uberblock rings in labels {2,3}, during the next sync. */ if ((psize > vd->vdev_psize) && (vd->vdev_psize != 0)) vd->vdev_copy_uberblocks = B_TRUE; vd->vdev_psize = psize; /* * Make sure the allocatable size hasn't shrunk too much. */ if (asize < vd->vdev_min_asize) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_BAD_LABEL); return (SET_ERROR(EINVAL)); } /* * We can always set the logical/physical ashift members since * their values are only used to calculate the vdev_ashift when * the device is first added to the config. These values should * not be used for anything else since they may change whenever * the device is reopened and we don't store them in the label. */ vd->vdev_physical_ashift = MAX(physical_ashift, vd->vdev_physical_ashift); vd->vdev_logical_ashift = MAX(logical_ashift, vd->vdev_logical_ashift); if (vd->vdev_asize == 0) { /* * This is the first-ever open, so use the computed values. * For compatibility, a different ashift can be requested. */ vd->vdev_asize = asize; vd->vdev_max_asize = max_asize; /* * If the vdev_ashift was not overridden at creation time, * then set it the logical ashift and optimize the ashift. */ if (vd->vdev_ashift == 0) { vd->vdev_ashift = vd->vdev_logical_ashift; if (vd->vdev_logical_ashift > ASHIFT_MAX) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_ASHIFT_TOO_BIG); return (SET_ERROR(EDOM)); } if (vd->vdev_top == vd && vd->vdev_attaching == B_FALSE) vdev_ashift_optimize(vd); vd->vdev_attaching = B_FALSE; } if (vd->vdev_ashift != 0 && (vd->vdev_ashift < ASHIFT_MIN || vd->vdev_ashift > ASHIFT_MAX)) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_BAD_ASHIFT); return (SET_ERROR(EDOM)); } } else { /* * Make sure the alignment required hasn't increased. */ if (vd->vdev_ashift > vd->vdev_top->vdev_ashift && vd->vdev_ops->vdev_op_leaf) { (void) zfs_ereport_post( FM_EREPORT_ZFS_DEVICE_BAD_ASHIFT, spa, vd, NULL, NULL, 0); vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_BAD_LABEL); return (SET_ERROR(EDOM)); } vd->vdev_max_asize = max_asize; } /* * If all children are healthy we update asize if either: * The asize has increased, due to a device expansion caused by dynamic * LUN growth or vdev replacement, and automatic expansion is enabled; * making the additional space available. * * The asize has decreased, due to a device shrink usually caused by a * vdev replace with a smaller device. This ensures that calculations * based of max_asize and asize e.g. esize are always valid. It's safe * to do this as we've already validated that asize is greater than * vdev_min_asize. */ if (vd->vdev_state == VDEV_STATE_HEALTHY && ((asize > vd->vdev_asize && (vd->vdev_expanding || spa->spa_autoexpand)) || (asize < vd->vdev_asize))) vd->vdev_asize = asize; vdev_set_min_asize(vd); /* * Ensure we can issue some IO before declaring the * vdev open for business. */ if (vd->vdev_ops->vdev_op_leaf && (error = zio_wait(vdev_probe(vd, NULL))) != 0) { vdev_set_state(vd, B_TRUE, VDEV_STATE_FAULTED, VDEV_AUX_ERR_EXCEEDED); return (error); } /* * Track the minimum allocation size. */ if (vd->vdev_top == vd && vd->vdev_ashift != 0 && vd->vdev_islog == 0 && vd->vdev_aux == NULL) { uint64_t min_alloc = vdev_get_min_alloc(vd); vdev_spa_set_alloc(spa, min_alloc); } /* * If this is a leaf vdev, assess whether a resilver is needed. * But don't do this if we are doing a reopen for a scrub, since * this would just restart the scrub we are already doing. */ if (vd->vdev_ops->vdev_op_leaf && !spa->spa_scrub_reopen) dsl_scan_assess_vdev(spa->spa_dsl_pool, vd); return (0); } static void vdev_validate_child(void *arg) { vdev_t *vd = arg; vd->vdev_validate_thread = curthread; vd->vdev_validate_error = vdev_validate(vd); vd->vdev_validate_thread = NULL; } /* * Called once the vdevs are all opened, this routine validates the label * contents. This needs to be done before vdev_load() so that we don't * inadvertently do repair I/Os to the wrong device. * * This function will only return failure if one of the vdevs indicates that it * has since been destroyed or exported. This is only possible if * /etc/zfs/zpool.cache was readonly at the time. Otherwise, the vdev state * will be updated but the function will return 0. */ int vdev_validate(vdev_t *vd) { spa_t *spa = vd->vdev_spa; taskq_t *tq = NULL; nvlist_t *label; uint64_t guid = 0, aux_guid = 0, top_guid; uint64_t state; nvlist_t *nvl; uint64_t txg; int children = vd->vdev_children; if (vdev_validate_skip) return (0); if (children > 0) { tq = taskq_create("vdev_validate", children, minclsyspri, children, children, TASKQ_PREPOPULATE); } for (uint64_t c = 0; c < children; c++) { vdev_t *cvd = vd->vdev_child[c]; if (tq == NULL || vdev_uses_zvols(cvd)) { vdev_validate_child(cvd); } else { VERIFY(taskq_dispatch(tq, vdev_validate_child, cvd, TQ_SLEEP) != TASKQID_INVALID); } } if (tq != NULL) { taskq_wait(tq); taskq_destroy(tq); } for (int c = 0; c < children; c++) { int error = vd->vdev_child[c]->vdev_validate_error; if (error != 0) return (SET_ERROR(EBADF)); } /* * If the device has already failed, or was marked offline, don't do * any further validation. Otherwise, label I/O will fail and we will * overwrite the previous state. */ if (!vd->vdev_ops->vdev_op_leaf || !vdev_readable(vd)) return (0); /* * If we are performing an extreme rewind, we allow for a label that * was modified at a point after the current txg. * If config lock is not held do not check for the txg. spa_sync could * be updating the vdev's label before updating spa_last_synced_txg. */ if (spa->spa_extreme_rewind || spa_last_synced_txg(spa) == 0 || spa_config_held(spa, SCL_CONFIG, RW_WRITER) != SCL_CONFIG) txg = UINT64_MAX; else txg = spa_last_synced_txg(spa); if ((label = vdev_label_read_config(vd, txg)) == NULL) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_BAD_LABEL); vdev_dbgmsg(vd, "vdev_validate: failed reading config for " "txg %llu", (u_longlong_t)txg); return (0); } /* * Determine if this vdev has been split off into another * pool. If so, then refuse to open it. */ if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_SPLIT_GUID, &aux_guid) == 0 && aux_guid == spa_guid(spa)) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_SPLIT_POOL); nvlist_free(label); vdev_dbgmsg(vd, "vdev_validate: vdev split into other pool"); return (0); } if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_GUID, &guid) != 0) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); nvlist_free(label); vdev_dbgmsg(vd, "vdev_validate: '%s' missing from label", ZPOOL_CONFIG_POOL_GUID); return (0); } /* * If config is not trusted then ignore the spa guid check. This is * necessary because if the machine crashed during a re-guid the new * guid might have been written to all of the vdev labels, but not the * cached config. The check will be performed again once we have the * trusted config from the MOS. */ if (spa->spa_trust_config && guid != spa_guid(spa)) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); nvlist_free(label); vdev_dbgmsg(vd, "vdev_validate: vdev label pool_guid doesn't " "match config (%llu != %llu)", (u_longlong_t)guid, (u_longlong_t)spa_guid(spa)); return (0); } if (nvlist_lookup_nvlist(label, ZPOOL_CONFIG_VDEV_TREE, &nvl) != 0 || nvlist_lookup_uint64(nvl, ZPOOL_CONFIG_ORIG_GUID, &aux_guid) != 0) aux_guid = 0; if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &guid) != 0) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); nvlist_free(label); vdev_dbgmsg(vd, "vdev_validate: '%s' missing from label", ZPOOL_CONFIG_GUID); return (0); } if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_TOP_GUID, &top_guid) != 0) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); nvlist_free(label); vdev_dbgmsg(vd, "vdev_validate: '%s' missing from label", ZPOOL_CONFIG_TOP_GUID); return (0); } /* * If this vdev just became a top-level vdev because its sibling was * detached, it will have adopted the parent's vdev guid -- but the * label may or may not be on disk yet. Fortunately, either version * of the label will have the same top guid, so if we're a top-level * vdev, we can safely compare to that instead. * However, if the config comes from a cachefile that failed to update * after the detach, a top-level vdev will appear as a non top-level * vdev in the config. Also relax the constraints if we perform an * extreme rewind. * * If we split this vdev off instead, then we also check the * original pool's guid. We don't want to consider the vdev * corrupt if it is partway through a split operation. */ if (vd->vdev_guid != guid && vd->vdev_guid != aux_guid) { boolean_t mismatch = B_FALSE; if (spa->spa_trust_config && !spa->spa_extreme_rewind) { if (vd != vd->vdev_top || vd->vdev_guid != top_guid) mismatch = B_TRUE; } else { if (vd->vdev_guid != top_guid && vd->vdev_top->vdev_guid != guid) mismatch = B_TRUE; } if (mismatch) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); nvlist_free(label); vdev_dbgmsg(vd, "vdev_validate: config guid " "doesn't match label guid"); vdev_dbgmsg(vd, "CONFIG: guid %llu, top_guid %llu", (u_longlong_t)vd->vdev_guid, (u_longlong_t)vd->vdev_top->vdev_guid); vdev_dbgmsg(vd, "LABEL: guid %llu, top_guid %llu, " "aux_guid %llu", (u_longlong_t)guid, (u_longlong_t)top_guid, (u_longlong_t)aux_guid); return (0); } } if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_STATE, &state) != 0) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); nvlist_free(label); vdev_dbgmsg(vd, "vdev_validate: '%s' missing from label", ZPOOL_CONFIG_POOL_STATE); return (0); } nvlist_free(label); /* * If this is a verbatim import, no need to check the * state of the pool. */ if (!(spa->spa_import_flags & ZFS_IMPORT_VERBATIM) && spa_load_state(spa) == SPA_LOAD_OPEN && state != POOL_STATE_ACTIVE) { vdev_dbgmsg(vd, "vdev_validate: invalid pool state (%llu) " "for spa %s", (u_longlong_t)state, spa->spa_name); return (SET_ERROR(EBADF)); } /* * If we were able to open and validate a vdev that was * previously marked permanently unavailable, clear that state * now. */ if (vd->vdev_not_present) vd->vdev_not_present = 0; return (0); } static void vdev_update_path(const char *prefix, char *svd, char **dvd, uint64_t guid) { if (svd != NULL && *dvd != NULL) { if (strcmp(svd, *dvd) != 0) { zfs_dbgmsg("vdev_copy_path: vdev %llu: %s changed " "from '%s' to '%s'", (u_longlong_t)guid, prefix, *dvd, svd); spa_strfree(*dvd); *dvd = spa_strdup(svd); } } else if (svd != NULL) { *dvd = spa_strdup(svd); zfs_dbgmsg("vdev_copy_path: vdev %llu: path set to '%s'", (u_longlong_t)guid, *dvd); } } static void vdev_copy_path_impl(vdev_t *svd, vdev_t *dvd) { char *old, *new; vdev_update_path("vdev_path", svd->vdev_path, &dvd->vdev_path, dvd->vdev_guid); vdev_update_path("vdev_devid", svd->vdev_devid, &dvd->vdev_devid, dvd->vdev_guid); vdev_update_path("vdev_physpath", svd->vdev_physpath, &dvd->vdev_physpath, dvd->vdev_guid); /* * Our enclosure sysfs path may have changed between imports */ old = dvd->vdev_enc_sysfs_path; new = svd->vdev_enc_sysfs_path; if ((old != NULL && new == NULL) || (old == NULL && new != NULL) || ((old != NULL && new != NULL) && strcmp(new, old) != 0)) { zfs_dbgmsg("vdev_copy_path: vdev %llu: vdev_enc_sysfs_path " "changed from '%s' to '%s'", (u_longlong_t)dvd->vdev_guid, old, new); if (dvd->vdev_enc_sysfs_path) spa_strfree(dvd->vdev_enc_sysfs_path); if (svd->vdev_enc_sysfs_path) { dvd->vdev_enc_sysfs_path = spa_strdup( svd->vdev_enc_sysfs_path); } else { dvd->vdev_enc_sysfs_path = NULL; } } } /* * Recursively copy vdev paths from one vdev to another. Source and destination * vdev trees must have same geometry otherwise return error. Intended to copy * paths from userland config into MOS config. */ int vdev_copy_path_strict(vdev_t *svd, vdev_t *dvd) { if ((svd->vdev_ops == &vdev_missing_ops) || (svd->vdev_ishole && dvd->vdev_ishole) || (dvd->vdev_ops == &vdev_indirect_ops)) return (0); if (svd->vdev_ops != dvd->vdev_ops) { vdev_dbgmsg(svd, "vdev_copy_path: vdev type mismatch: %s != %s", svd->vdev_ops->vdev_op_type, dvd->vdev_ops->vdev_op_type); return (SET_ERROR(EINVAL)); } if (svd->vdev_guid != dvd->vdev_guid) { vdev_dbgmsg(svd, "vdev_copy_path: guids mismatch (%llu != " "%llu)", (u_longlong_t)svd->vdev_guid, (u_longlong_t)dvd->vdev_guid); return (SET_ERROR(EINVAL)); } if (svd->vdev_children != dvd->vdev_children) { vdev_dbgmsg(svd, "vdev_copy_path: children count mismatch: " "%llu != %llu", (u_longlong_t)svd->vdev_children, (u_longlong_t)dvd->vdev_children); return (SET_ERROR(EINVAL)); } for (uint64_t i = 0; i < svd->vdev_children; i++) { int error = vdev_copy_path_strict(svd->vdev_child[i], dvd->vdev_child[i]); if (error != 0) return (error); } if (svd->vdev_ops->vdev_op_leaf) vdev_copy_path_impl(svd, dvd); return (0); } static void vdev_copy_path_search(vdev_t *stvd, vdev_t *dvd) { ASSERT(stvd->vdev_top == stvd); ASSERT3U(stvd->vdev_id, ==, dvd->vdev_top->vdev_id); for (uint64_t i = 0; i < dvd->vdev_children; i++) { vdev_copy_path_search(stvd, dvd->vdev_child[i]); } if (!dvd->vdev_ops->vdev_op_leaf || !vdev_is_concrete(dvd)) return; /* * The idea here is that while a vdev can shift positions within * a top vdev (when replacing, attaching mirror, etc.) it cannot * step outside of it. */ vdev_t *vd = vdev_lookup_by_guid(stvd, dvd->vdev_guid); if (vd == NULL || vd->vdev_ops != dvd->vdev_ops) return; ASSERT(vd->vdev_ops->vdev_op_leaf); vdev_copy_path_impl(vd, dvd); } /* * Recursively copy vdev paths from one root vdev to another. Source and * destination vdev trees may differ in geometry. For each destination leaf * vdev, search a vdev with the same guid and top vdev id in the source. * Intended to copy paths from userland config into MOS config. */ void vdev_copy_path_relaxed(vdev_t *srvd, vdev_t *drvd) { uint64_t children = MIN(srvd->vdev_children, drvd->vdev_children); ASSERT(srvd->vdev_ops == &vdev_root_ops); ASSERT(drvd->vdev_ops == &vdev_root_ops); for (uint64_t i = 0; i < children; i++) { vdev_copy_path_search(srvd->vdev_child[i], drvd->vdev_child[i]); } } /* * Close a virtual device. */ void vdev_close(vdev_t *vd) { vdev_t *pvd = vd->vdev_parent; spa_t *spa __maybe_unused = vd->vdev_spa; ASSERT(vd != NULL); ASSERT(vd->vdev_open_thread == curthread || spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL); /* * If our parent is reopening, then we are as well, unless we are * going offline. */ if (pvd != NULL && pvd->vdev_reopening) vd->vdev_reopening = (pvd->vdev_reopening && !vd->vdev_offline); vd->vdev_ops->vdev_op_close(vd); /* * We record the previous state before we close it, so that if we are * doing a reopen(), we don't generate FMA ereports if we notice that * it's still faulted. */ vd->vdev_prevstate = vd->vdev_state; if (vd->vdev_offline) vd->vdev_state = VDEV_STATE_OFFLINE; else vd->vdev_state = VDEV_STATE_CLOSED; vd->vdev_stat.vs_aux = VDEV_AUX_NONE; } void vdev_hold(vdev_t *vd) { spa_t *spa = vd->vdev_spa; ASSERT(spa_is_root(spa)); if (spa->spa_state == POOL_STATE_UNINITIALIZED) return; for (int c = 0; c < vd->vdev_children; c++) vdev_hold(vd->vdev_child[c]); if (vd->vdev_ops->vdev_op_leaf && vd->vdev_ops->vdev_op_hold != NULL) vd->vdev_ops->vdev_op_hold(vd); } void vdev_rele(vdev_t *vd) { ASSERT(spa_is_root(vd->vdev_spa)); for (int c = 0; c < vd->vdev_children; c++) vdev_rele(vd->vdev_child[c]); if (vd->vdev_ops->vdev_op_leaf && vd->vdev_ops->vdev_op_rele != NULL) vd->vdev_ops->vdev_op_rele(vd); } /* * Reopen all interior vdevs and any unopened leaves. We don't actually * reopen leaf vdevs which had previously been opened as they might deadlock * on the spa_config_lock. Instead we only obtain the leaf's physical size. * If the leaf has never been opened then open it, as usual. */ void vdev_reopen(vdev_t *vd) { spa_t *spa = vd->vdev_spa; ASSERT(spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL); /* set the reopening flag unless we're taking the vdev offline */ vd->vdev_reopening = !vd->vdev_offline; vdev_close(vd); (void) vdev_open(vd); /* * Call vdev_validate() here to make sure we have the same device. * Otherwise, a device with an invalid label could be successfully * opened in response to vdev_reopen(). */ if (vd->vdev_aux) { (void) vdev_validate_aux(vd); if (vdev_readable(vd) && vdev_writeable(vd) && vd->vdev_aux == &spa->spa_l2cache) { /* * In case the vdev is present we should evict all ARC * buffers and pointers to log blocks and reclaim their * space before restoring its contents to L2ARC. */ if (l2arc_vdev_present(vd)) { l2arc_rebuild_vdev(vd, B_TRUE); } else { l2arc_add_vdev(spa, vd); } spa_async_request(spa, SPA_ASYNC_L2CACHE_REBUILD); spa_async_request(spa, SPA_ASYNC_L2CACHE_TRIM); } } else { (void) vdev_validate(vd); } /* * Recheck if resilver is still needed and cancel any * scheduled resilver if resilver is unneeded. */ if (!vdev_resilver_needed(spa->spa_root_vdev, NULL, NULL) && spa->spa_async_tasks & SPA_ASYNC_RESILVER) { mutex_enter(&spa->spa_async_lock); spa->spa_async_tasks &= ~SPA_ASYNC_RESILVER; mutex_exit(&spa->spa_async_lock); } /* * Reassess parent vdev's health. */ vdev_propagate_state(vd); } int vdev_create(vdev_t *vd, uint64_t txg, boolean_t isreplacing) { int error; /* * Normally, partial opens (e.g. of a mirror) are allowed. * For a create, however, we want to fail the request if * there are any components we can't open. */ error = vdev_open(vd); if (error || vd->vdev_state != VDEV_STATE_HEALTHY) { vdev_close(vd); return (error ? error : SET_ERROR(ENXIO)); } /* * Recursively load DTLs and initialize all labels. */ if ((error = vdev_dtl_load(vd)) != 0 || (error = vdev_label_init(vd, txg, isreplacing ? VDEV_LABEL_REPLACE : VDEV_LABEL_CREATE)) != 0) { vdev_close(vd); return (error); } return (0); } void vdev_metaslab_set_size(vdev_t *vd) { uint64_t asize = vd->vdev_asize; uint64_t ms_count = asize >> zfs_vdev_default_ms_shift; uint64_t ms_shift; /* * There are two dimensions to the metaslab sizing calculation: * the size of the metaslab and the count of metaslabs per vdev. * * The default values used below are a good balance between memory * usage (larger metaslab size means more memory needed for loaded * metaslabs; more metaslabs means more memory needed for the * metaslab_t structs), metaslab load time (larger metaslabs take * longer to load), and metaslab sync time (more metaslabs means * more time spent syncing all of them). * * In general, we aim for zfs_vdev_default_ms_count (200) metaslabs. * The range of the dimensions are as follows: * * 2^29 <= ms_size <= 2^34 * 16 <= ms_count <= 131,072 * * On the lower end of vdev sizes, we aim for metaslabs sizes of * at least 512MB (2^29) to minimize fragmentation effects when * testing with smaller devices. However, the count constraint * of at least 16 metaslabs will override this minimum size goal. * * On the upper end of vdev sizes, we aim for a maximum metaslab * size of 16GB. However, we will cap the total count to 2^17 * metaslabs to keep our memory footprint in check and let the * metaslab size grow from there if that limit is hit. * * The net effect of applying above constrains is summarized below. * * vdev size metaslab count * --------------|----------------- * < 8GB ~16 * 8GB - 100GB one per 512MB * 100GB - 3TB ~200 * 3TB - 2PB one per 16GB * > 2PB ~131,072 * -------------------------------- * * Finally, note that all of the above calculate the initial * number of metaslabs. Expanding a top-level vdev will result * in additional metaslabs being allocated making it possible * to exceed the zfs_vdev_ms_count_limit. */ if (ms_count < zfs_vdev_min_ms_count) ms_shift = highbit64(asize / zfs_vdev_min_ms_count); else if (ms_count > zfs_vdev_default_ms_count) ms_shift = highbit64(asize / zfs_vdev_default_ms_count); else ms_shift = zfs_vdev_default_ms_shift; if (ms_shift < SPA_MAXBLOCKSHIFT) { ms_shift = SPA_MAXBLOCKSHIFT; } else if (ms_shift > zfs_vdev_max_ms_shift) { ms_shift = zfs_vdev_max_ms_shift; /* cap the total count to constrain memory footprint */ if ((asize >> ms_shift) > zfs_vdev_ms_count_limit) ms_shift = highbit64(asize / zfs_vdev_ms_count_limit); } vd->vdev_ms_shift = ms_shift; ASSERT3U(vd->vdev_ms_shift, >=, SPA_MAXBLOCKSHIFT); } void vdev_dirty(vdev_t *vd, int flags, void *arg, uint64_t txg) { ASSERT(vd == vd->vdev_top); /* indirect vdevs don't have metaslabs or dtls */ ASSERT(vdev_is_concrete(vd) || flags == 0); ASSERT(ISP2(flags)); ASSERT(spa_writeable(vd->vdev_spa)); if (flags & VDD_METASLAB) (void) txg_list_add(&vd->vdev_ms_list, arg, txg); if (flags & VDD_DTL) (void) txg_list_add(&vd->vdev_dtl_list, arg, txg); (void) txg_list_add(&vd->vdev_spa->spa_vdev_txg_list, vd, txg); } void vdev_dirty_leaves(vdev_t *vd, int flags, uint64_t txg) { for (int c = 0; c < vd->vdev_children; c++) vdev_dirty_leaves(vd->vdev_child[c], flags, txg); if (vd->vdev_ops->vdev_op_leaf) vdev_dirty(vd->vdev_top, flags, vd, txg); } /* * DTLs. * * A vdev's DTL (dirty time log) is the set of transaction groups for which * the vdev has less than perfect replication. There are four kinds of DTL: * * DTL_MISSING: txgs for which the vdev has no valid copies of the data * * DTL_PARTIAL: txgs for which data is available, but not fully replicated * * DTL_SCRUB: the txgs that could not be repaired by the last scrub; upon * scrub completion, DTL_SCRUB replaces DTL_MISSING in the range of * txgs that was scrubbed. * * DTL_OUTAGE: txgs which cannot currently be read, whether due to * persistent errors or just some device being offline. * Unlike the other three, the DTL_OUTAGE map is not generally * maintained; it's only computed when needed, typically to * determine whether a device can be detached. * * For leaf vdevs, DTL_MISSING and DTL_PARTIAL are identical: the device * either has the data or it doesn't. * * For interior vdevs such as mirror and RAID-Z the picture is more complex. * A vdev's DTL_PARTIAL is the union of its children's DTL_PARTIALs, because * if any child is less than fully replicated, then so is its parent. * A vdev's DTL_MISSING is a modified union of its children's DTL_MISSINGs, * comprising only those txgs which appear in 'maxfaults' or more children; * those are the txgs we don't have enough replication to read. For example, * double-parity RAID-Z can tolerate up to two missing devices (maxfaults == 2); * thus, its DTL_MISSING consists of the set of txgs that appear in more than * two child DTL_MISSING maps. * * It should be clear from the above that to compute the DTLs and outage maps * for all vdevs, it suffices to know just the leaf vdevs' DTL_MISSING maps. * Therefore, that is all we keep on disk. When loading the pool, or after * a configuration change, we generate all other DTLs from first principles. */ void vdev_dtl_dirty(vdev_t *vd, vdev_dtl_type_t t, uint64_t txg, uint64_t size) { range_tree_t *rt = vd->vdev_dtl[t]; ASSERT(t < DTL_TYPES); ASSERT(vd != vd->vdev_spa->spa_root_vdev); ASSERT(spa_writeable(vd->vdev_spa)); mutex_enter(&vd->vdev_dtl_lock); if (!range_tree_contains(rt, txg, size)) range_tree_add(rt, txg, size); mutex_exit(&vd->vdev_dtl_lock); } boolean_t vdev_dtl_contains(vdev_t *vd, vdev_dtl_type_t t, uint64_t txg, uint64_t size) { range_tree_t *rt = vd->vdev_dtl[t]; boolean_t dirty = B_FALSE; ASSERT(t < DTL_TYPES); ASSERT(vd != vd->vdev_spa->spa_root_vdev); /* * While we are loading the pool, the DTLs have not been loaded yet. * This isn't a problem but it can result in devices being tried * which are known to not have the data. In which case, the import * is relying on the checksum to ensure that we get the right data. * Note that while importing we are only reading the MOS, which is * always checksummed. */ mutex_enter(&vd->vdev_dtl_lock); if (!range_tree_is_empty(rt)) dirty = range_tree_contains(rt, txg, size); mutex_exit(&vd->vdev_dtl_lock); return (dirty); } boolean_t vdev_dtl_empty(vdev_t *vd, vdev_dtl_type_t t) { range_tree_t *rt = vd->vdev_dtl[t]; boolean_t empty; mutex_enter(&vd->vdev_dtl_lock); empty = range_tree_is_empty(rt); mutex_exit(&vd->vdev_dtl_lock); return (empty); } /* * Check if the txg falls within the range which must be * resilvered. DVAs outside this range can always be skipped. */ boolean_t vdev_default_need_resilver(vdev_t *vd, const dva_t *dva, size_t psize, uint64_t phys_birth) { (void) dva, (void) psize; /* Set by sequential resilver. */ if (phys_birth == TXG_UNKNOWN) return (B_TRUE); return (vdev_dtl_contains(vd, DTL_PARTIAL, phys_birth, 1)); } /* * Returns B_TRUE if the vdev determines the DVA needs to be resilvered. */ boolean_t vdev_dtl_need_resilver(vdev_t *vd, const dva_t *dva, size_t psize, uint64_t phys_birth) { ASSERT(vd != vd->vdev_spa->spa_root_vdev); if (vd->vdev_ops->vdev_op_need_resilver == NULL || vd->vdev_ops->vdev_op_leaf) return (B_TRUE); return (vd->vdev_ops->vdev_op_need_resilver(vd, dva, psize, phys_birth)); } /* * Returns the lowest txg in the DTL range. */ static uint64_t vdev_dtl_min(vdev_t *vd) { ASSERT(MUTEX_HELD(&vd->vdev_dtl_lock)); ASSERT3U(range_tree_space(vd->vdev_dtl[DTL_MISSING]), !=, 0); ASSERT0(vd->vdev_children); return (range_tree_min(vd->vdev_dtl[DTL_MISSING]) - 1); } /* * Returns the highest txg in the DTL. */ static uint64_t vdev_dtl_max(vdev_t *vd) { ASSERT(MUTEX_HELD(&vd->vdev_dtl_lock)); ASSERT3U(range_tree_space(vd->vdev_dtl[DTL_MISSING]), !=, 0); ASSERT0(vd->vdev_children); return (range_tree_max(vd->vdev_dtl[DTL_MISSING])); } /* * Determine if a resilvering vdev should remove any DTL entries from * its range. If the vdev was resilvering for the entire duration of the * scan then it should excise that range from its DTLs. Otherwise, this * vdev is considered partially resilvered and should leave its DTL * entries intact. The comment in vdev_dtl_reassess() describes how we * excise the DTLs. */ static boolean_t vdev_dtl_should_excise(vdev_t *vd, boolean_t rebuild_done) { ASSERT0(vd->vdev_children); if (vd->vdev_state < VDEV_STATE_DEGRADED) return (B_FALSE); if (vd->vdev_resilver_deferred) return (B_FALSE); if (range_tree_is_empty(vd->vdev_dtl[DTL_MISSING])) return (B_TRUE); if (rebuild_done) { vdev_rebuild_t *vr = &vd->vdev_top->vdev_rebuild_config; vdev_rebuild_phys_t *vrp = &vr->vr_rebuild_phys; /* Rebuild not initiated by attach */ if (vd->vdev_rebuild_txg == 0) return (B_TRUE); /* * When a rebuild completes without error then all missing data * up to the rebuild max txg has been reconstructed and the DTL * is eligible for excision. */ if (vrp->vrp_rebuild_state == VDEV_REBUILD_COMPLETE && vdev_dtl_max(vd) <= vrp->vrp_max_txg) { ASSERT3U(vrp->vrp_min_txg, <=, vdev_dtl_min(vd)); ASSERT3U(vrp->vrp_min_txg, <, vd->vdev_rebuild_txg); ASSERT3U(vd->vdev_rebuild_txg, <=, vrp->vrp_max_txg); return (B_TRUE); } } else { dsl_scan_t *scn = vd->vdev_spa->spa_dsl_pool->dp_scan; dsl_scan_phys_t *scnp __maybe_unused = &scn->scn_phys; /* Resilver not initiated by attach */ if (vd->vdev_resilver_txg == 0) return (B_TRUE); /* * When a resilver is initiated the scan will assign the * scn_max_txg value to the highest txg value that exists * in all DTLs. If this device's max DTL is not part of this * scan (i.e. it is not in the range (scn_min_txg, scn_max_txg] * then it is not eligible for excision. */ if (vdev_dtl_max(vd) <= scn->scn_phys.scn_max_txg) { ASSERT3U(scnp->scn_min_txg, <=, vdev_dtl_min(vd)); ASSERT3U(scnp->scn_min_txg, <, vd->vdev_resilver_txg); ASSERT3U(vd->vdev_resilver_txg, <=, scnp->scn_max_txg); return (B_TRUE); } } return (B_FALSE); } /* * Reassess DTLs after a config change or scrub completion. If txg == 0 no * write operations will be issued to the pool. */ void vdev_dtl_reassess(vdev_t *vd, uint64_t txg, uint64_t scrub_txg, boolean_t scrub_done, boolean_t rebuild_done) { spa_t *spa = vd->vdev_spa; avl_tree_t reftree; int minref; ASSERT(spa_config_held(spa, SCL_ALL, RW_READER) != 0); for (int c = 0; c < vd->vdev_children; c++) vdev_dtl_reassess(vd->vdev_child[c], txg, scrub_txg, scrub_done, rebuild_done); if (vd == spa->spa_root_vdev || !vdev_is_concrete(vd) || vd->vdev_aux) return; if (vd->vdev_ops->vdev_op_leaf) { dsl_scan_t *scn = spa->spa_dsl_pool->dp_scan; vdev_rebuild_t *vr = &vd->vdev_top->vdev_rebuild_config; boolean_t check_excise = B_FALSE; boolean_t wasempty = B_TRUE; mutex_enter(&vd->vdev_dtl_lock); /* * If requested, pretend the scan or rebuild completed cleanly. */ if (zfs_scan_ignore_errors) { if (scn != NULL) scn->scn_phys.scn_errors = 0; if (vr != NULL) vr->vr_rebuild_phys.vrp_errors = 0; } if (scrub_txg != 0 && !range_tree_is_empty(vd->vdev_dtl[DTL_MISSING])) { wasempty = B_FALSE; zfs_dbgmsg("guid:%llu txg:%llu scrub:%llu started:%d " "dtl:%llu/%llu errors:%llu", (u_longlong_t)vd->vdev_guid, (u_longlong_t)txg, (u_longlong_t)scrub_txg, spa->spa_scrub_started, (u_longlong_t)vdev_dtl_min(vd), (u_longlong_t)vdev_dtl_max(vd), (u_longlong_t)(scn ? scn->scn_phys.scn_errors : 0)); } /* * If we've completed a scrub/resilver or a rebuild cleanly * then determine if this vdev should remove any DTLs. We * only want to excise regions on vdevs that were available * during the entire duration of this scan. */ if (rebuild_done && vr != NULL && vr->vr_rebuild_phys.vrp_errors == 0) { check_excise = B_TRUE; } else { if (spa->spa_scrub_started || (scn != NULL && scn->scn_phys.scn_errors == 0)) { check_excise = B_TRUE; } } if (scrub_txg && check_excise && vdev_dtl_should_excise(vd, rebuild_done)) { /* * We completed a scrub, resilver or rebuild up to * scrub_txg. If we did it without rebooting, then * the scrub dtl will be valid, so excise the old * region and fold in the scrub dtl. Otherwise, * leave the dtl as-is if there was an error. * * There's little trick here: to excise the beginning * of the DTL_MISSING map, we put it into a reference * tree and then add a segment with refcnt -1 that * covers the range [0, scrub_txg). This means * that each txg in that range has refcnt -1 or 0. * We then add DTL_SCRUB with a refcnt of 2, so that * entries in the range [0, scrub_txg) will have a * positive refcnt -- either 1 or 2. We then convert * the reference tree into the new DTL_MISSING map. */ space_reftree_create(&reftree); space_reftree_add_map(&reftree, vd->vdev_dtl[DTL_MISSING], 1); space_reftree_add_seg(&reftree, 0, scrub_txg, -1); space_reftree_add_map(&reftree, vd->vdev_dtl[DTL_SCRUB], 2); space_reftree_generate_map(&reftree, vd->vdev_dtl[DTL_MISSING], 1); space_reftree_destroy(&reftree); if (!range_tree_is_empty(vd->vdev_dtl[DTL_MISSING])) { zfs_dbgmsg("update DTL_MISSING:%llu/%llu", (u_longlong_t)vdev_dtl_min(vd), (u_longlong_t)vdev_dtl_max(vd)); } else if (!wasempty) { zfs_dbgmsg("DTL_MISSING is now empty"); } } range_tree_vacate(vd->vdev_dtl[DTL_PARTIAL], NULL, NULL); range_tree_walk(vd->vdev_dtl[DTL_MISSING], range_tree_add, vd->vdev_dtl[DTL_PARTIAL]); if (scrub_done) range_tree_vacate(vd->vdev_dtl[DTL_SCRUB], NULL, NULL); range_tree_vacate(vd->vdev_dtl[DTL_OUTAGE], NULL, NULL); if (!vdev_readable(vd)) range_tree_add(vd->vdev_dtl[DTL_OUTAGE], 0, -1ULL); else range_tree_walk(vd->vdev_dtl[DTL_MISSING], range_tree_add, vd->vdev_dtl[DTL_OUTAGE]); /* * If the vdev was resilvering or rebuilding and no longer * has any DTLs then reset the appropriate flag and dirty * the top level so that we persist the change. */ if (txg != 0 && range_tree_is_empty(vd->vdev_dtl[DTL_MISSING]) && range_tree_is_empty(vd->vdev_dtl[DTL_OUTAGE])) { if (vd->vdev_rebuild_txg != 0) { vd->vdev_rebuild_txg = 0; vdev_config_dirty(vd->vdev_top); } else if (vd->vdev_resilver_txg != 0) { vd->vdev_resilver_txg = 0; vdev_config_dirty(vd->vdev_top); } } mutex_exit(&vd->vdev_dtl_lock); if (txg != 0) vdev_dirty(vd->vdev_top, VDD_DTL, vd, txg); } else { mutex_enter(&vd->vdev_dtl_lock); for (int t = 0; t < DTL_TYPES; t++) { /* account for child's outage in parent's missing map */ int s = (t == DTL_MISSING) ? DTL_OUTAGE: t; if (t == DTL_SCRUB) { /* leaf vdevs only */ continue; } if (t == DTL_PARTIAL) { /* i.e. non-zero */ minref = 1; } else if (vdev_get_nparity(vd) != 0) { /* RAIDZ, DRAID */ minref = vdev_get_nparity(vd) + 1; } else { /* any kind of mirror */ minref = vd->vdev_children; } space_reftree_create(&reftree); for (int c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; mutex_enter(&cvd->vdev_dtl_lock); space_reftree_add_map(&reftree, cvd->vdev_dtl[s], 1); mutex_exit(&cvd->vdev_dtl_lock); } space_reftree_generate_map(&reftree, vd->vdev_dtl[t], minref); space_reftree_destroy(&reftree); } mutex_exit(&vd->vdev_dtl_lock); } if (vd->vdev_top->vdev_ops == &vdev_raidz_ops) { raidz_dtl_reassessed(vd); } } /* * Iterate over all the vdevs except spare, and post kobj events */ void vdev_post_kobj_evt(vdev_t *vd) { if (vd->vdev_ops->vdev_op_kobj_evt_post && vd->vdev_kobj_flag == B_FALSE) { vd->vdev_kobj_flag = B_TRUE; vd->vdev_ops->vdev_op_kobj_evt_post(vd); } for (int c = 0; c < vd->vdev_children; c++) vdev_post_kobj_evt(vd->vdev_child[c]); } /* * Iterate over all the vdevs except spare, and clear kobj events */ void vdev_clear_kobj_evt(vdev_t *vd) { vd->vdev_kobj_flag = B_FALSE; for (int c = 0; c < vd->vdev_children; c++) vdev_clear_kobj_evt(vd->vdev_child[c]); } int vdev_dtl_load(vdev_t *vd) { spa_t *spa = vd->vdev_spa; objset_t *mos = spa->spa_meta_objset; range_tree_t *rt; int error = 0; if (vd->vdev_ops->vdev_op_leaf && vd->vdev_dtl_object != 0) { ASSERT(vdev_is_concrete(vd)); /* * If the dtl cannot be sync'd there is no need to open it. */ if (spa->spa_mode == SPA_MODE_READ && !spa->spa_read_spacemaps) return (0); error = space_map_open(&vd->vdev_dtl_sm, mos, vd->vdev_dtl_object, 0, -1ULL, 0); if (error) return (error); ASSERT(vd->vdev_dtl_sm != NULL); rt = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); error = space_map_load(vd->vdev_dtl_sm, rt, SM_ALLOC); if (error == 0) { mutex_enter(&vd->vdev_dtl_lock); range_tree_walk(rt, range_tree_add, vd->vdev_dtl[DTL_MISSING]); mutex_exit(&vd->vdev_dtl_lock); } range_tree_vacate(rt, NULL, NULL); range_tree_destroy(rt); return (error); } for (int c = 0; c < vd->vdev_children; c++) { error = vdev_dtl_load(vd->vdev_child[c]); if (error != 0) break; } return (error); } static void vdev_zap_allocation_data(vdev_t *vd, dmu_tx_t *tx) { spa_t *spa = vd->vdev_spa; objset_t *mos = spa->spa_meta_objset; vdev_alloc_bias_t alloc_bias = vd->vdev_alloc_bias; const char *string; ASSERT(alloc_bias != VDEV_BIAS_NONE); string = (alloc_bias == VDEV_BIAS_LOG) ? VDEV_ALLOC_BIAS_LOG : (alloc_bias == VDEV_BIAS_SPECIAL) ? VDEV_ALLOC_BIAS_SPECIAL : (alloc_bias == VDEV_BIAS_DEDUP) ? VDEV_ALLOC_BIAS_DEDUP : NULL; ASSERT(string != NULL); VERIFY0(zap_add(mos, vd->vdev_top_zap, VDEV_TOP_ZAP_ALLOCATION_BIAS, 1, strlen(string) + 1, string, tx)); if (alloc_bias == VDEV_BIAS_SPECIAL || alloc_bias == VDEV_BIAS_DEDUP) { spa_activate_allocation_classes(spa, tx); } } void vdev_destroy_unlink_zap(vdev_t *vd, uint64_t zapobj, dmu_tx_t *tx) { spa_t *spa = vd->vdev_spa; VERIFY0(zap_destroy(spa->spa_meta_objset, zapobj, tx)); VERIFY0(zap_remove_int(spa->spa_meta_objset, spa->spa_all_vdev_zaps, zapobj, tx)); } uint64_t vdev_create_link_zap(vdev_t *vd, dmu_tx_t *tx) { spa_t *spa = vd->vdev_spa; uint64_t zap = zap_create(spa->spa_meta_objset, DMU_OTN_ZAP_METADATA, DMU_OT_NONE, 0, tx); ASSERT(zap != 0); VERIFY0(zap_add_int(spa->spa_meta_objset, spa->spa_all_vdev_zaps, zap, tx)); return (zap); } void vdev_construct_zaps(vdev_t *vd, dmu_tx_t *tx) { if (vd->vdev_ops != &vdev_hole_ops && vd->vdev_ops != &vdev_missing_ops && vd->vdev_ops != &vdev_root_ops && !vd->vdev_top->vdev_removing) { if (vd->vdev_ops->vdev_op_leaf && vd->vdev_leaf_zap == 0) { vd->vdev_leaf_zap = vdev_create_link_zap(vd, tx); } if (vd == vd->vdev_top && vd->vdev_top_zap == 0) { vd->vdev_top_zap = vdev_create_link_zap(vd, tx); if (vd->vdev_alloc_bias != VDEV_BIAS_NONE) vdev_zap_allocation_data(vd, tx); } } if (vd->vdev_ops == &vdev_root_ops && vd->vdev_root_zap == 0 && spa_feature_is_enabled(vd->vdev_spa, SPA_FEATURE_AVZ_V2)) { if (!spa_feature_is_active(vd->vdev_spa, SPA_FEATURE_AVZ_V2)) spa_feature_incr(vd->vdev_spa, SPA_FEATURE_AVZ_V2, tx); vd->vdev_root_zap = vdev_create_link_zap(vd, tx); } for (uint64_t i = 0; i < vd->vdev_children; i++) { vdev_construct_zaps(vd->vdev_child[i], tx); } } static void vdev_dtl_sync(vdev_t *vd, uint64_t txg) { spa_t *spa = vd->vdev_spa; range_tree_t *rt = vd->vdev_dtl[DTL_MISSING]; objset_t *mos = spa->spa_meta_objset; range_tree_t *rtsync; dmu_tx_t *tx; uint64_t object = space_map_object(vd->vdev_dtl_sm); ASSERT(vdev_is_concrete(vd)); ASSERT(vd->vdev_ops->vdev_op_leaf); tx = dmu_tx_create_assigned(spa->spa_dsl_pool, txg); if (vd->vdev_detached || vd->vdev_top->vdev_removing) { mutex_enter(&vd->vdev_dtl_lock); space_map_free(vd->vdev_dtl_sm, tx); space_map_close(vd->vdev_dtl_sm); vd->vdev_dtl_sm = NULL; mutex_exit(&vd->vdev_dtl_lock); /* * We only destroy the leaf ZAP for detached leaves or for * removed log devices. Removed data devices handle leaf ZAP * cleanup later, once cancellation is no longer possible. */ if (vd->vdev_leaf_zap != 0 && (vd->vdev_detached || vd->vdev_top->vdev_islog)) { vdev_destroy_unlink_zap(vd, vd->vdev_leaf_zap, tx); vd->vdev_leaf_zap = 0; } dmu_tx_commit(tx); return; } if (vd->vdev_dtl_sm == NULL) { uint64_t new_object; new_object = space_map_alloc(mos, zfs_vdev_dtl_sm_blksz, tx); VERIFY3U(new_object, !=, 0); VERIFY0(space_map_open(&vd->vdev_dtl_sm, mos, new_object, 0, -1ULL, 0)); ASSERT(vd->vdev_dtl_sm != NULL); } rtsync = range_tree_create(NULL, RANGE_SEG64, NULL, 0, 0); mutex_enter(&vd->vdev_dtl_lock); range_tree_walk(rt, range_tree_add, rtsync); mutex_exit(&vd->vdev_dtl_lock); space_map_truncate(vd->vdev_dtl_sm, zfs_vdev_dtl_sm_blksz, tx); space_map_write(vd->vdev_dtl_sm, rtsync, SM_ALLOC, SM_NO_VDEVID, tx); range_tree_vacate(rtsync, NULL, NULL); range_tree_destroy(rtsync); /* * If the object for the space map has changed then dirty * the top level so that we update the config. */ if (object != space_map_object(vd->vdev_dtl_sm)) { vdev_dbgmsg(vd, "txg %llu, spa %s, DTL old object %llu, " "new object %llu", (u_longlong_t)txg, spa_name(spa), (u_longlong_t)object, (u_longlong_t)space_map_object(vd->vdev_dtl_sm)); vdev_config_dirty(vd->vdev_top); } dmu_tx_commit(tx); } /* * Determine whether the specified vdev can be offlined/detached/removed * without losing data. */ boolean_t vdev_dtl_required(vdev_t *vd) { spa_t *spa = vd->vdev_spa; vdev_t *tvd = vd->vdev_top; uint8_t cant_read = vd->vdev_cant_read; boolean_t required; ASSERT(spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL); if (vd == spa->spa_root_vdev || vd == tvd) return (B_TRUE); /* * Temporarily mark the device as unreadable, and then determine * whether this results in any DTL outages in the top-level vdev. * If not, we can safely offline/detach/remove the device. */ vd->vdev_cant_read = B_TRUE; vdev_dtl_reassess(tvd, 0, 0, B_FALSE, B_FALSE); required = !vdev_dtl_empty(tvd, DTL_OUTAGE); vd->vdev_cant_read = cant_read; vdev_dtl_reassess(tvd, 0, 0, B_FALSE, B_FALSE); if (!required && zio_injection_enabled) { required = !!zio_handle_device_injection(vd, NULL, SET_ERROR(ECHILD)); } return (required); } /* * Determine if resilver is needed, and if so the txg range. */ boolean_t vdev_resilver_needed(vdev_t *vd, uint64_t *minp, uint64_t *maxp) { boolean_t needed = B_FALSE; uint64_t thismin = UINT64_MAX; uint64_t thismax = 0; if (vd->vdev_children == 0) { mutex_enter(&vd->vdev_dtl_lock); if (!range_tree_is_empty(vd->vdev_dtl[DTL_MISSING]) && vdev_writeable(vd)) { thismin = vdev_dtl_min(vd); thismax = vdev_dtl_max(vd); needed = B_TRUE; } mutex_exit(&vd->vdev_dtl_lock); } else { for (int c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; uint64_t cmin, cmax; if (vdev_resilver_needed(cvd, &cmin, &cmax)) { thismin = MIN(thismin, cmin); thismax = MAX(thismax, cmax); needed = B_TRUE; } } } if (needed && minp) { *minp = thismin; *maxp = thismax; } return (needed); } /* * Gets the checkpoint space map object from the vdev's ZAP. On success sm_obj * will contain either the checkpoint spacemap object or zero if none exists. * All other errors are returned to the caller. */ int vdev_checkpoint_sm_object(vdev_t *vd, uint64_t *sm_obj) { ASSERT0(spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER)); if (vd->vdev_top_zap == 0) { *sm_obj = 0; return (0); } int error = zap_lookup(spa_meta_objset(vd->vdev_spa), vd->vdev_top_zap, VDEV_TOP_ZAP_POOL_CHECKPOINT_SM, sizeof (uint64_t), 1, sm_obj); if (error == ENOENT) { *sm_obj = 0; error = 0; } return (error); } int vdev_load(vdev_t *vd) { int children = vd->vdev_children; int error = 0; taskq_t *tq = NULL; /* * It's only worthwhile to use the taskq for the root vdev, because the * slow part is metaslab_init, and that only happens for top-level * vdevs. */ if (vd->vdev_ops == &vdev_root_ops && vd->vdev_children > 0) { tq = taskq_create("vdev_load", children, minclsyspri, children, children, TASKQ_PREPOPULATE); } /* * Recursively load all children. */ for (int c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; if (tq == NULL || vdev_uses_zvols(cvd)) { cvd->vdev_load_error = vdev_load(cvd); } else { VERIFY(taskq_dispatch(tq, vdev_load_child, cvd, TQ_SLEEP) != TASKQID_INVALID); } } if (tq != NULL) { taskq_wait(tq); taskq_destroy(tq); } for (int c = 0; c < vd->vdev_children; c++) { int error = vd->vdev_child[c]->vdev_load_error; if (error != 0) return (error); } vdev_set_deflate_ratio(vd); if (vd->vdev_ops == &vdev_raidz_ops) { error = vdev_raidz_load(vd); if (error != 0) return (error); } /* * On spa_load path, grab the allocation bias from our zap */ if (vd == vd->vdev_top && vd->vdev_top_zap != 0) { spa_t *spa = vd->vdev_spa; char bias_str[64]; error = zap_lookup(spa->spa_meta_objset, vd->vdev_top_zap, VDEV_TOP_ZAP_ALLOCATION_BIAS, 1, sizeof (bias_str), bias_str); if (error == 0) { ASSERT(vd->vdev_alloc_bias == VDEV_BIAS_NONE); vd->vdev_alloc_bias = vdev_derive_alloc_bias(bias_str); } else if (error != ENOENT) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); vdev_dbgmsg(vd, "vdev_load: zap_lookup(top_zap=%llu) " "failed [error=%d]", (u_longlong_t)vd->vdev_top_zap, error); return (error); } } if (vd == vd->vdev_top && vd->vdev_top_zap != 0) { spa_t *spa = vd->vdev_spa; uint64_t failfast; error = zap_lookup(spa->spa_meta_objset, vd->vdev_top_zap, vdev_prop_to_name(VDEV_PROP_FAILFAST), sizeof (failfast), 1, &failfast); if (error == 0) { vd->vdev_failfast = failfast & 1; } else if (error == ENOENT) { vd->vdev_failfast = vdev_prop_default_numeric( VDEV_PROP_FAILFAST); } else { vdev_dbgmsg(vd, "vdev_load: zap_lookup(top_zap=%llu) " "failed [error=%d]", (u_longlong_t)vd->vdev_top_zap, error); } } /* * Load any rebuild state from the top-level vdev zap. */ if (vd == vd->vdev_top && vd->vdev_top_zap != 0) { error = vdev_rebuild_load(vd); if (error && error != ENOTSUP) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); vdev_dbgmsg(vd, "vdev_load: vdev_rebuild_load " "failed [error=%d]", error); return (error); } } if (vd->vdev_top_zap != 0 || vd->vdev_leaf_zap != 0) { uint64_t zapobj; if (vd->vdev_top_zap != 0) zapobj = vd->vdev_top_zap; else zapobj = vd->vdev_leaf_zap; error = vdev_prop_get_int(vd, VDEV_PROP_CHECKSUM_N, &vd->vdev_checksum_n); if (error && error != ENOENT) vdev_dbgmsg(vd, "vdev_load: zap_lookup(zap=%llu) " "failed [error=%d]", (u_longlong_t)zapobj, error); error = vdev_prop_get_int(vd, VDEV_PROP_CHECKSUM_T, &vd->vdev_checksum_t); if (error && error != ENOENT) vdev_dbgmsg(vd, "vdev_load: zap_lookup(zap=%llu) " "failed [error=%d]", (u_longlong_t)zapobj, error); error = vdev_prop_get_int(vd, VDEV_PROP_IO_N, &vd->vdev_io_n); if (error && error != ENOENT) vdev_dbgmsg(vd, "vdev_load: zap_lookup(zap=%llu) " "failed [error=%d]", (u_longlong_t)zapobj, error); error = vdev_prop_get_int(vd, VDEV_PROP_IO_T, &vd->vdev_io_t); if (error && error != ENOENT) vdev_dbgmsg(vd, "vdev_load: zap_lookup(zap=%llu) " "failed [error=%d]", (u_longlong_t)zapobj, error); error = vdev_prop_get_int(vd, VDEV_PROP_SLOW_IO_N, &vd->vdev_slow_io_n); if (error && error != ENOENT) vdev_dbgmsg(vd, "vdev_load: zap_lookup(zap=%llu) " "failed [error=%d]", (u_longlong_t)zapobj, error); error = vdev_prop_get_int(vd, VDEV_PROP_SLOW_IO_T, &vd->vdev_slow_io_t); if (error && error != ENOENT) vdev_dbgmsg(vd, "vdev_load: zap_lookup(zap=%llu) " "failed [error=%d]", (u_longlong_t)zapobj, error); } /* * If this is a top-level vdev, initialize its metaslabs. */ if (vd == vd->vdev_top && vdev_is_concrete(vd)) { vdev_metaslab_group_create(vd); if (vd->vdev_ashift == 0 || vd->vdev_asize == 0) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); vdev_dbgmsg(vd, "vdev_load: invalid size. ashift=%llu, " "asize=%llu", (u_longlong_t)vd->vdev_ashift, (u_longlong_t)vd->vdev_asize); return (SET_ERROR(ENXIO)); } error = vdev_metaslab_init(vd, 0); if (error != 0) { vdev_dbgmsg(vd, "vdev_load: metaslab_init failed " "[error=%d]", error); vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); return (error); } uint64_t checkpoint_sm_obj; error = vdev_checkpoint_sm_object(vd, &checkpoint_sm_obj); if (error == 0 && checkpoint_sm_obj != 0) { objset_t *mos = spa_meta_objset(vd->vdev_spa); ASSERT(vd->vdev_asize != 0); ASSERT3P(vd->vdev_checkpoint_sm, ==, NULL); error = space_map_open(&vd->vdev_checkpoint_sm, mos, checkpoint_sm_obj, 0, vd->vdev_asize, vd->vdev_ashift); if (error != 0) { vdev_dbgmsg(vd, "vdev_load: space_map_open " "failed for checkpoint spacemap (obj %llu) " "[error=%d]", (u_longlong_t)checkpoint_sm_obj, error); return (error); } ASSERT3P(vd->vdev_checkpoint_sm, !=, NULL); /* * Since the checkpoint_sm contains free entries * exclusively we can use space_map_allocated() to * indicate the cumulative checkpointed space that * has been freed. */ vd->vdev_stat.vs_checkpoint_space = -space_map_allocated(vd->vdev_checkpoint_sm); vd->vdev_spa->spa_checkpoint_info.sci_dspace += vd->vdev_stat.vs_checkpoint_space; } else if (error != 0) { vdev_dbgmsg(vd, "vdev_load: failed to retrieve " "checkpoint space map object from vdev ZAP " "[error=%d]", error); return (error); } } /* * If this is a leaf vdev, load its DTL. */ if (vd->vdev_ops->vdev_op_leaf && (error = vdev_dtl_load(vd)) != 0) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); vdev_dbgmsg(vd, "vdev_load: vdev_dtl_load failed " "[error=%d]", error); return (error); } uint64_t obsolete_sm_object; error = vdev_obsolete_sm_object(vd, &obsolete_sm_object); if (error == 0 && obsolete_sm_object != 0) { objset_t *mos = vd->vdev_spa->spa_meta_objset; ASSERT(vd->vdev_asize != 0); ASSERT3P(vd->vdev_obsolete_sm, ==, NULL); if ((error = space_map_open(&vd->vdev_obsolete_sm, mos, obsolete_sm_object, 0, vd->vdev_asize, 0))) { vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); vdev_dbgmsg(vd, "vdev_load: space_map_open failed for " "obsolete spacemap (obj %llu) [error=%d]", (u_longlong_t)obsolete_sm_object, error); return (error); } } else if (error != 0) { vdev_dbgmsg(vd, "vdev_load: failed to retrieve obsolete " "space map object from vdev ZAP [error=%d]", error); return (error); } return (0); } /* * The special vdev case is used for hot spares and l2cache devices. Its * sole purpose it to set the vdev state for the associated vdev. To do this, * we make sure that we can open the underlying device, then try to read the * label, and make sure that the label is sane and that it hasn't been * repurposed to another pool. */ int vdev_validate_aux(vdev_t *vd) { nvlist_t *label; uint64_t guid, version; uint64_t state; if (!vdev_readable(vd)) return (0); if ((label = vdev_label_read_config(vd, -1ULL)) == NULL) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); return (-1); } if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_VERSION, &version) != 0 || !SPA_VERSION_IS_SUPPORTED(version) || nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID, &guid) != 0 || guid != vd->vdev_guid || nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_STATE, &state) != 0) { vdev_set_state(vd, B_TRUE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); nvlist_free(label); return (-1); } /* * We don't actually check the pool state here. If it's in fact in * use by another pool, we update this fact on the fly when requested. */ nvlist_free(label); return (0); } static void vdev_destroy_ms_flush_data(vdev_t *vd, dmu_tx_t *tx) { objset_t *mos = spa_meta_objset(vd->vdev_spa); if (vd->vdev_top_zap == 0) return; uint64_t object = 0; int err = zap_lookup(mos, vd->vdev_top_zap, VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS, sizeof (uint64_t), 1, &object); if (err == ENOENT) return; VERIFY0(err); VERIFY0(dmu_object_free(mos, object, tx)); VERIFY0(zap_remove(mos, vd->vdev_top_zap, VDEV_TOP_ZAP_MS_UNFLUSHED_PHYS_TXGS, tx)); } /* * Free the objects used to store this vdev's spacemaps, and the array * that points to them. */ void vdev_destroy_spacemaps(vdev_t *vd, dmu_tx_t *tx) { if (vd->vdev_ms_array == 0) return; objset_t *mos = vd->vdev_spa->spa_meta_objset; uint64_t array_count = vd->vdev_asize >> vd->vdev_ms_shift; size_t array_bytes = array_count * sizeof (uint64_t); uint64_t *smobj_array = kmem_alloc(array_bytes, KM_SLEEP); VERIFY0(dmu_read(mos, vd->vdev_ms_array, 0, array_bytes, smobj_array, 0)); for (uint64_t i = 0; i < array_count; i++) { uint64_t smobj = smobj_array[i]; if (smobj == 0) continue; space_map_free_obj(mos, smobj, tx); } kmem_free(smobj_array, array_bytes); VERIFY0(dmu_object_free(mos, vd->vdev_ms_array, tx)); vdev_destroy_ms_flush_data(vd, tx); vd->vdev_ms_array = 0; } static void vdev_remove_empty_log(vdev_t *vd, uint64_t txg) { spa_t *spa = vd->vdev_spa; ASSERT(vd->vdev_islog); ASSERT(vd == vd->vdev_top); ASSERT3U(txg, ==, spa_syncing_txg(spa)); dmu_tx_t *tx = dmu_tx_create_assigned(spa_get_dsl(spa), txg); vdev_destroy_spacemaps(vd, tx); if (vd->vdev_top_zap != 0) { vdev_destroy_unlink_zap(vd, vd->vdev_top_zap, tx); vd->vdev_top_zap = 0; } dmu_tx_commit(tx); } void vdev_sync_done(vdev_t *vd, uint64_t txg) { metaslab_t *msp; boolean_t reassess = !txg_list_empty(&vd->vdev_ms_list, TXG_CLEAN(txg)); ASSERT(vdev_is_concrete(vd)); while ((msp = txg_list_remove(&vd->vdev_ms_list, TXG_CLEAN(txg))) != NULL) metaslab_sync_done(msp, txg); if (reassess) { metaslab_sync_reassess(vd->vdev_mg); if (vd->vdev_log_mg != NULL) metaslab_sync_reassess(vd->vdev_log_mg); } } void vdev_sync(vdev_t *vd, uint64_t txg) { spa_t *spa = vd->vdev_spa; vdev_t *lvd; metaslab_t *msp; ASSERT3U(txg, ==, spa->spa_syncing_txg); dmu_tx_t *tx = dmu_tx_create_assigned(spa->spa_dsl_pool, txg); if (range_tree_space(vd->vdev_obsolete_segments) > 0) { ASSERT(vd->vdev_removing || vd->vdev_ops == &vdev_indirect_ops); vdev_indirect_sync_obsolete(vd, tx); /* * If the vdev is indirect, it can't have dirty * metaslabs or DTLs. */ if (vd->vdev_ops == &vdev_indirect_ops) { ASSERT(txg_list_empty(&vd->vdev_ms_list, txg)); ASSERT(txg_list_empty(&vd->vdev_dtl_list, txg)); dmu_tx_commit(tx); return; } } ASSERT(vdev_is_concrete(vd)); if (vd->vdev_ms_array == 0 && vd->vdev_ms_shift != 0 && !vd->vdev_removing) { ASSERT(vd == vd->vdev_top); ASSERT0(vd->vdev_indirect_config.vic_mapping_object); vd->vdev_ms_array = dmu_object_alloc(spa->spa_meta_objset, DMU_OT_OBJECT_ARRAY, 0, DMU_OT_NONE, 0, tx); ASSERT(vd->vdev_ms_array != 0); vdev_config_dirty(vd); } while ((msp = txg_list_remove(&vd->vdev_ms_list, txg)) != NULL) { metaslab_sync(msp, txg); (void) txg_list_add(&vd->vdev_ms_list, msp, TXG_CLEAN(txg)); } while ((lvd = txg_list_remove(&vd->vdev_dtl_list, txg)) != NULL) vdev_dtl_sync(lvd, txg); /* * If this is an empty log device being removed, destroy the * metadata associated with it. */ if (vd->vdev_islog && vd->vdev_stat.vs_alloc == 0 && vd->vdev_removing) vdev_remove_empty_log(vd, txg); (void) txg_list_add(&spa->spa_vdev_txg_list, vd, TXG_CLEAN(txg)); dmu_tx_commit(tx); } /* * Return the amount of space that should be (or was) allocated for the given * psize (compressed block size) in the given TXG. Note that for expanded * RAIDZ vdevs, the size allocated for older BP's may be larger. See * vdev_raidz_asize(). */ uint64_t vdev_psize_to_asize_txg(vdev_t *vd, uint64_t psize, uint64_t txg) { return (vd->vdev_ops->vdev_op_asize(vd, psize, txg)); } uint64_t vdev_psize_to_asize(vdev_t *vd, uint64_t psize) { return (vdev_psize_to_asize_txg(vd, psize, 0)); } /* * Mark the given vdev faulted. A faulted vdev behaves as if the device could * not be opened, and no I/O is attempted. */ int vdev_fault(spa_t *spa, uint64_t guid, vdev_aux_t aux) { vdev_t *vd, *tvd; spa_vdev_state_enter(spa, SCL_NONE); if ((vd = spa_lookup_by_guid(spa, guid, B_TRUE)) == NULL) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENODEV))); if (!vd->vdev_ops->vdev_op_leaf) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENOTSUP))); tvd = vd->vdev_top; /* * If user did a 'zpool offline -f' then make the fault persist across * reboots. */ if (aux == VDEV_AUX_EXTERNAL_PERSIST) { /* * There are two kinds of forced faults: temporary and * persistent. Temporary faults go away at pool import, while * persistent faults stay set. Both types of faults can be * cleared with a zpool clear. * * We tell if a vdev is persistently faulted by looking at the * ZPOOL_CONFIG_AUX_STATE nvpair. If it's set to "external" at * import then it's a persistent fault. Otherwise, it's * temporary. We get ZPOOL_CONFIG_AUX_STATE set to "external" * by setting vd.vdev_stat.vs_aux to VDEV_AUX_EXTERNAL. This * tells vdev_config_generate() (which gets run later) to set * ZPOOL_CONFIG_AUX_STATE to "external" in the nvlist. */ vd->vdev_stat.vs_aux = VDEV_AUX_EXTERNAL; vd->vdev_tmpoffline = B_FALSE; aux = VDEV_AUX_EXTERNAL; } else { vd->vdev_tmpoffline = B_TRUE; } /* * We don't directly use the aux state here, but if we do a * vdev_reopen(), we need this value to be present to remember why we * were faulted. */ vd->vdev_label_aux = aux; /* * Faulted state takes precedence over degraded. */ vd->vdev_delayed_close = B_FALSE; vd->vdev_faulted = 1ULL; vd->vdev_degraded = 0ULL; vdev_set_state(vd, B_FALSE, VDEV_STATE_FAULTED, aux); /* * If this device has the only valid copy of the data, then * back off and simply mark the vdev as degraded instead. */ if (!tvd->vdev_islog && vd->vdev_aux == NULL && vdev_dtl_required(vd)) { vd->vdev_degraded = 1ULL; vd->vdev_faulted = 0ULL; /* * If we reopen the device and it's not dead, only then do we * mark it degraded. */ vdev_reopen(tvd); if (vdev_readable(vd)) vdev_set_state(vd, B_FALSE, VDEV_STATE_DEGRADED, aux); } return (spa_vdev_state_exit(spa, vd, 0)); } /* * Mark the given vdev degraded. A degraded vdev is purely an indication to the * user that something is wrong. The vdev continues to operate as normal as far * as I/O is concerned. */ int vdev_degrade(spa_t *spa, uint64_t guid, vdev_aux_t aux) { vdev_t *vd; spa_vdev_state_enter(spa, SCL_NONE); if ((vd = spa_lookup_by_guid(spa, guid, B_TRUE)) == NULL) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENODEV))); if (!vd->vdev_ops->vdev_op_leaf) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENOTSUP))); /* * If the vdev is already faulted, then don't do anything. */ if (vd->vdev_faulted || vd->vdev_degraded) return (spa_vdev_state_exit(spa, NULL, 0)); vd->vdev_degraded = 1ULL; if (!vdev_is_dead(vd)) vdev_set_state(vd, B_FALSE, VDEV_STATE_DEGRADED, aux); return (spa_vdev_state_exit(spa, vd, 0)); } int vdev_remove_wanted(spa_t *spa, uint64_t guid) { vdev_t *vd; spa_vdev_state_enter(spa, SCL_NONE); if ((vd = spa_lookup_by_guid(spa, guid, B_TRUE)) == NULL) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENODEV))); /* * If the vdev is already removed, or expanding which can trigger * repartition add/remove events, then don't do anything. */ if (vd->vdev_removed || vd->vdev_expanding) return (spa_vdev_state_exit(spa, NULL, 0)); /* * Confirm the vdev has been removed, otherwise don't do anything. */ if (vd->vdev_ops->vdev_op_leaf && !zio_wait(vdev_probe(vd, NULL))) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(EEXIST))); vd->vdev_remove_wanted = B_TRUE; spa_async_request(spa, SPA_ASYNC_REMOVE); return (spa_vdev_state_exit(spa, vd, 0)); } /* * Online the given vdev. * * If 'ZFS_ONLINE_UNSPARE' is set, it implies two things. First, any attached * spare device should be detached when the device finishes resilvering. * Second, the online should be treated like a 'test' online case, so no FMA * events are generated if the device fails to open. */ int vdev_online(spa_t *spa, uint64_t guid, uint64_t flags, vdev_state_t *newstate) { vdev_t *vd, *tvd, *pvd, *rvd = spa->spa_root_vdev; boolean_t wasoffline; vdev_state_t oldstate; spa_vdev_state_enter(spa, SCL_NONE); if ((vd = spa_lookup_by_guid(spa, guid, B_TRUE)) == NULL) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENODEV))); wasoffline = (vd->vdev_offline || vd->vdev_tmpoffline); oldstate = vd->vdev_state; tvd = vd->vdev_top; vd->vdev_offline = B_FALSE; vd->vdev_tmpoffline = B_FALSE; vd->vdev_checkremove = !!(flags & ZFS_ONLINE_CHECKREMOVE); vd->vdev_forcefault = !!(flags & ZFS_ONLINE_FORCEFAULT); /* XXX - L2ARC 1.0 does not support expansion */ if (!vd->vdev_aux) { for (pvd = vd; pvd != rvd; pvd = pvd->vdev_parent) pvd->vdev_expanding = !!((flags & ZFS_ONLINE_EXPAND) || spa->spa_autoexpand); vd->vdev_expansion_time = gethrestime_sec(); } vdev_reopen(tvd); vd->vdev_checkremove = vd->vdev_forcefault = B_FALSE; if (!vd->vdev_aux) { for (pvd = vd; pvd != rvd; pvd = pvd->vdev_parent) pvd->vdev_expanding = B_FALSE; } if (newstate) *newstate = vd->vdev_state; if ((flags & ZFS_ONLINE_UNSPARE) && !vdev_is_dead(vd) && vd->vdev_parent && vd->vdev_parent->vdev_ops == &vdev_spare_ops && vd->vdev_parent->vdev_child[0] == vd) vd->vdev_unspare = B_TRUE; if ((flags & ZFS_ONLINE_EXPAND) || spa->spa_autoexpand) { /* XXX - L2ARC 1.0 does not support expansion */ if (vd->vdev_aux) return (spa_vdev_state_exit(spa, vd, ENOTSUP)); spa->spa_ccw_fail_time = 0; spa_async_request(spa, SPA_ASYNC_CONFIG_UPDATE); } /* Restart initializing if necessary */ mutex_enter(&vd->vdev_initialize_lock); if (vdev_writeable(vd) && vd->vdev_initialize_thread == NULL && vd->vdev_initialize_state == VDEV_INITIALIZE_ACTIVE) { (void) vdev_initialize(vd); } mutex_exit(&vd->vdev_initialize_lock); /* * Restart trimming if necessary. We do not restart trimming for cache * devices here. This is triggered by l2arc_rebuild_vdev() * asynchronously for the whole device or in l2arc_evict() as it evicts * space for upcoming writes. */ mutex_enter(&vd->vdev_trim_lock); if (vdev_writeable(vd) && !vd->vdev_isl2cache && vd->vdev_trim_thread == NULL && vd->vdev_trim_state == VDEV_TRIM_ACTIVE) { (void) vdev_trim(vd, vd->vdev_trim_rate, vd->vdev_trim_partial, vd->vdev_trim_secure); } mutex_exit(&vd->vdev_trim_lock); if (wasoffline || (oldstate < VDEV_STATE_DEGRADED && vd->vdev_state >= VDEV_STATE_DEGRADED)) { spa_event_notify(spa, vd, NULL, ESC_ZFS_VDEV_ONLINE); /* * Asynchronously detach spare vdev if resilver or * rebuild is not required */ if (vd->vdev_unspare && !dsl_scan_resilvering(spa->spa_dsl_pool) && !dsl_scan_resilver_scheduled(spa->spa_dsl_pool) && !vdev_rebuild_active(tvd)) spa_async_request(spa, SPA_ASYNC_DETACH_SPARE); } return (spa_vdev_state_exit(spa, vd, 0)); } static int vdev_offline_locked(spa_t *spa, uint64_t guid, uint64_t flags) { vdev_t *vd, *tvd; int error = 0; uint64_t generation; metaslab_group_t *mg; top: spa_vdev_state_enter(spa, SCL_ALLOC); if ((vd = spa_lookup_by_guid(spa, guid, B_TRUE)) == NULL) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENODEV))); if (!vd->vdev_ops->vdev_op_leaf) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(ENOTSUP))); if (vd->vdev_ops == &vdev_draid_spare_ops) return (spa_vdev_state_exit(spa, NULL, ENOTSUP)); tvd = vd->vdev_top; mg = tvd->vdev_mg; generation = spa->spa_config_generation + 1; /* * If the device isn't already offline, try to offline it. */ if (!vd->vdev_offline) { /* * If this device has the only valid copy of some data, * don't allow it to be offlined. Log devices are always * expendable. */ if (!tvd->vdev_islog && vd->vdev_aux == NULL && vdev_dtl_required(vd)) return (spa_vdev_state_exit(spa, NULL, SET_ERROR(EBUSY))); /* * If the top-level is a slog and it has had allocations * then proceed. We check that the vdev's metaslab group * is not NULL since it's possible that we may have just * added this vdev but not yet initialized its metaslabs. */ if (tvd->vdev_islog && mg != NULL) { /* * Prevent any future allocations. */ ASSERT3P(tvd->vdev_log_mg, ==, NULL); metaslab_group_passivate(mg); (void) spa_vdev_state_exit(spa, vd, 0); error = spa_reset_logs(spa); /* * If the log device was successfully reset but has * checkpointed data, do not offline it. */ if (error == 0 && tvd->vdev_checkpoint_sm != NULL) { ASSERT3U(space_map_allocated( tvd->vdev_checkpoint_sm), !=, 0); error = ZFS_ERR_CHECKPOINT_EXISTS; } spa_vdev_state_enter(spa, SCL_ALLOC); /* * Check to see if the config has changed. */ if (error || generation != spa->spa_config_generation) { metaslab_group_activate(mg); if (error) return (spa_vdev_state_exit(spa, vd, error)); (void) spa_vdev_state_exit(spa, vd, 0); goto top; } ASSERT0(tvd->vdev_stat.vs_alloc); } /* * Offline this device and reopen its top-level vdev. * If the top-level vdev is a log device then just offline * it. Otherwise, if this action results in the top-level * vdev becoming unusable, undo it and fail the request. */ vd->vdev_offline = B_TRUE; vdev_reopen(tvd); if (!tvd->vdev_islog && vd->vdev_aux == NULL && vdev_is_dead(tvd)) { vd->vdev_offline = B_FALSE; vdev_reopen(tvd); return (spa_vdev_state_exit(spa, NULL, SET_ERROR(EBUSY))); } /* * Add the device back into the metaslab rotor so that * once we online the device it's open for business. */ if (tvd->vdev_islog && mg != NULL) metaslab_group_activate(mg); } vd->vdev_tmpoffline = !!(flags & ZFS_OFFLINE_TEMPORARY); return (spa_vdev_state_exit(spa, vd, 0)); } int vdev_offline(spa_t *spa, uint64_t guid, uint64_t flags) { int error; mutex_enter(&spa->spa_vdev_top_lock); error = vdev_offline_locked(spa, guid, flags); mutex_exit(&spa->spa_vdev_top_lock); return (error); } /* * Clear the error counts associated with this vdev. Unlike vdev_online() and * vdev_offline(), we assume the spa config is locked. We also clear all * children. If 'vd' is NULL, then the user wants to clear all vdevs. */ void vdev_clear(spa_t *spa, vdev_t *vd) { vdev_t *rvd = spa->spa_root_vdev; ASSERT(spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL); if (vd == NULL) vd = rvd; vd->vdev_stat.vs_read_errors = 0; vd->vdev_stat.vs_write_errors = 0; vd->vdev_stat.vs_checksum_errors = 0; vd->vdev_stat.vs_slow_ios = 0; for (int c = 0; c < vd->vdev_children; c++) vdev_clear(spa, vd->vdev_child[c]); /* * It makes no sense to "clear" an indirect or removed vdev. */ if (!vdev_is_concrete(vd) || vd->vdev_removed) return; /* * If we're in the FAULTED state or have experienced failed I/O, then * clear the persistent state and attempt to reopen the device. We * also mark the vdev config dirty, so that the new faulted state is * written out to disk. */ if (vd->vdev_faulted || vd->vdev_degraded || !vdev_readable(vd) || !vdev_writeable(vd)) { /* * When reopening in response to a clear event, it may be due to * a fmadm repair request. In this case, if the device is * still broken, we want to still post the ereport again. */ vd->vdev_forcefault = B_TRUE; vd->vdev_faulted = vd->vdev_degraded = 0ULL; vd->vdev_cant_read = B_FALSE; vd->vdev_cant_write = B_FALSE; vd->vdev_stat.vs_aux = 0; vdev_reopen(vd == rvd ? rvd : vd->vdev_top); vd->vdev_forcefault = B_FALSE; if (vd != rvd && vdev_writeable(vd->vdev_top)) vdev_state_dirty(vd->vdev_top); /* If a resilver isn't required, check if vdevs can be culled */ if (vd->vdev_aux == NULL && !vdev_is_dead(vd) && !dsl_scan_resilvering(spa->spa_dsl_pool) && !dsl_scan_resilver_scheduled(spa->spa_dsl_pool)) spa_async_request(spa, SPA_ASYNC_RESILVER_DONE); spa_event_notify(spa, vd, NULL, ESC_ZFS_VDEV_CLEAR); } /* * When clearing a FMA-diagnosed fault, we always want to * unspare the device, as we assume that the original spare was * done in response to the FMA fault. */ if (!vdev_is_dead(vd) && vd->vdev_parent != NULL && vd->vdev_parent->vdev_ops == &vdev_spare_ops && vd->vdev_parent->vdev_child[0] == vd) vd->vdev_unspare = B_TRUE; /* Clear recent error events cache (i.e. duplicate events tracking) */ zfs_ereport_clear(spa, vd); } boolean_t vdev_is_dead(vdev_t *vd) { /* * Holes and missing devices are always considered "dead". * This simplifies the code since we don't have to check for * these types of devices in the various code paths. * Instead we rely on the fact that we skip over dead devices * before issuing I/O to them. */ return (vd->vdev_state < VDEV_STATE_DEGRADED || vd->vdev_ops == &vdev_hole_ops || vd->vdev_ops == &vdev_missing_ops); } boolean_t vdev_readable(vdev_t *vd) { return (!vdev_is_dead(vd) && !vd->vdev_cant_read); } boolean_t vdev_writeable(vdev_t *vd) { return (!vdev_is_dead(vd) && !vd->vdev_cant_write && vdev_is_concrete(vd)); } boolean_t vdev_allocatable(vdev_t *vd) { uint64_t state = vd->vdev_state; /* * We currently allow allocations from vdevs which may be in the * process of reopening (i.e. VDEV_STATE_CLOSED). If the device * fails to reopen then we'll catch it later when we're holding * the proper locks. Note that we have to get the vdev state * in a local variable because although it changes atomically, * we're asking two separate questions about it. */ return (!(state < VDEV_STATE_DEGRADED && state != VDEV_STATE_CLOSED) && !vd->vdev_cant_write && vdev_is_concrete(vd) && vd->vdev_mg->mg_initialized); } boolean_t vdev_accessible(vdev_t *vd, zio_t *zio) { ASSERT(zio->io_vd == vd); if (vdev_is_dead(vd) || vd->vdev_remove_wanted) return (B_FALSE); if (zio->io_type == ZIO_TYPE_READ) return (!vd->vdev_cant_read); if (zio->io_type == ZIO_TYPE_WRITE) return (!vd->vdev_cant_write); return (B_TRUE); } static void vdev_get_child_stat(vdev_t *cvd, vdev_stat_t *vs, vdev_stat_t *cvs) { /* * Exclude the dRAID spare when aggregating to avoid double counting * the ops and bytes. These IOs are counted by the physical leaves. */ if (cvd->vdev_ops == &vdev_draid_spare_ops) return; for (int t = 0; t < VS_ZIO_TYPES; t++) { vs->vs_ops[t] += cvs->vs_ops[t]; vs->vs_bytes[t] += cvs->vs_bytes[t]; } cvs->vs_scan_removing = cvd->vdev_removing; } /* * Get extended stats */ static void vdev_get_child_stat_ex(vdev_t *cvd, vdev_stat_ex_t *vsx, vdev_stat_ex_t *cvsx) { (void) cvd; int t, b; for (t = 0; t < ZIO_TYPES; t++) { for (b = 0; b < ARRAY_SIZE(vsx->vsx_disk_histo[0]); b++) vsx->vsx_disk_histo[t][b] += cvsx->vsx_disk_histo[t][b]; for (b = 0; b < ARRAY_SIZE(vsx->vsx_total_histo[0]); b++) { vsx->vsx_total_histo[t][b] += cvsx->vsx_total_histo[t][b]; } } for (t = 0; t < ZIO_PRIORITY_NUM_QUEUEABLE; t++) { for (b = 0; b < ARRAY_SIZE(vsx->vsx_queue_histo[0]); b++) { vsx->vsx_queue_histo[t][b] += cvsx->vsx_queue_histo[t][b]; } vsx->vsx_active_queue[t] += cvsx->vsx_active_queue[t]; vsx->vsx_pend_queue[t] += cvsx->vsx_pend_queue[t]; for (b = 0; b < ARRAY_SIZE(vsx->vsx_ind_histo[0]); b++) vsx->vsx_ind_histo[t][b] += cvsx->vsx_ind_histo[t][b]; for (b = 0; b < ARRAY_SIZE(vsx->vsx_agg_histo[0]); b++) vsx->vsx_agg_histo[t][b] += cvsx->vsx_agg_histo[t][b]; } } boolean_t vdev_is_spacemap_addressable(vdev_t *vd) { if (spa_feature_is_active(vd->vdev_spa, SPA_FEATURE_SPACEMAP_V2)) return (B_TRUE); /* * If double-word space map entries are not enabled we assume * 47 bits of the space map entry are dedicated to the entry's * offset (see SM_OFFSET_BITS in space_map.h). We then use that * to calculate the maximum address that can be described by a * space map entry for the given device. */ uint64_t shift = vd->vdev_ashift + SM_OFFSET_BITS; if (shift >= 63) /* detect potential overflow */ return (B_TRUE); return (vd->vdev_asize < (1ULL << shift)); } /* * Get statistics for the given vdev. */ static void vdev_get_stats_ex_impl(vdev_t *vd, vdev_stat_t *vs, vdev_stat_ex_t *vsx) { int t; /* * If we're getting stats on the root vdev, aggregate the I/O counts * over all top-level vdevs (i.e. the direct children of the root). */ if (!vd->vdev_ops->vdev_op_leaf) { if (vs) { memset(vs->vs_ops, 0, sizeof (vs->vs_ops)); memset(vs->vs_bytes, 0, sizeof (vs->vs_bytes)); } if (vsx) memset(vsx, 0, sizeof (*vsx)); for (int c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; vdev_stat_t *cvs = &cvd->vdev_stat; vdev_stat_ex_t *cvsx = &cvd->vdev_stat_ex; vdev_get_stats_ex_impl(cvd, cvs, cvsx); if (vs) vdev_get_child_stat(cvd, vs, cvs); if (vsx) vdev_get_child_stat_ex(cvd, vsx, cvsx); } } else { /* * We're a leaf. Just copy our ZIO active queue stats in. The * other leaf stats are updated in vdev_stat_update(). */ if (!vsx) return; memcpy(vsx, &vd->vdev_stat_ex, sizeof (vd->vdev_stat_ex)); for (t = 0; t < ZIO_PRIORITY_NUM_QUEUEABLE; t++) { vsx->vsx_active_queue[t] = vd->vdev_queue.vq_cactive[t]; vsx->vsx_pend_queue[t] = vdev_queue_class_length(vd, t); } } } void vdev_get_stats_ex(vdev_t *vd, vdev_stat_t *vs, vdev_stat_ex_t *vsx) { vdev_t *tvd = vd->vdev_top; mutex_enter(&vd->vdev_stat_lock); if (vs) { memcpy(vs, &vd->vdev_stat, sizeof (*vs)); vs->vs_timestamp = gethrtime() - vs->vs_timestamp; vs->vs_state = vd->vdev_state; vs->vs_rsize = vdev_get_min_asize(vd); if (vd->vdev_ops->vdev_op_leaf) { vs->vs_pspace = vd->vdev_psize; vs->vs_rsize += VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE; /* * Report initializing progress. Since we don't * have the initializing locks held, this is only * an estimate (although a fairly accurate one). */ vs->vs_initialize_bytes_done = vd->vdev_initialize_bytes_done; vs->vs_initialize_bytes_est = vd->vdev_initialize_bytes_est; vs->vs_initialize_state = vd->vdev_initialize_state; vs->vs_initialize_action_time = vd->vdev_initialize_action_time; /* * Report manual TRIM progress. Since we don't have * the manual TRIM locks held, this is only an * estimate (although fairly accurate one). */ vs->vs_trim_notsup = !vd->vdev_has_trim; vs->vs_trim_bytes_done = vd->vdev_trim_bytes_done; vs->vs_trim_bytes_est = vd->vdev_trim_bytes_est; vs->vs_trim_state = vd->vdev_trim_state; vs->vs_trim_action_time = vd->vdev_trim_action_time; /* Set when there is a deferred resilver. */ vs->vs_resilver_deferred = vd->vdev_resilver_deferred; } /* * Report expandable space on top-level, non-auxiliary devices * only. The expandable space is reported in terms of metaslab * sized units since that determines how much space the pool * can expand. */ if (vd->vdev_aux == NULL && tvd != NULL) { vs->vs_esize = P2ALIGN_TYPED( vd->vdev_max_asize - vd->vdev_asize, 1ULL << tvd->vdev_ms_shift, uint64_t); } vs->vs_configured_ashift = vd->vdev_top != NULL ? vd->vdev_top->vdev_ashift : vd->vdev_ashift; vs->vs_logical_ashift = vd->vdev_logical_ashift; if (vd->vdev_physical_ashift <= ASHIFT_MAX) vs->vs_physical_ashift = vd->vdev_physical_ashift; else vs->vs_physical_ashift = 0; /* * Report fragmentation and rebuild progress for top-level, * non-auxiliary, concrete devices. */ if (vd->vdev_aux == NULL && vd == vd->vdev_top && vdev_is_concrete(vd)) { /* * The vdev fragmentation rating doesn't take into * account the embedded slog metaslab (vdev_log_mg). * Since it's only one metaslab, it would have a tiny * impact on the overall fragmentation. */ vs->vs_fragmentation = (vd->vdev_mg != NULL) ? vd->vdev_mg->mg_fragmentation : 0; } vs->vs_noalloc = MAX(vd->vdev_noalloc, tvd ? tvd->vdev_noalloc : 0); } vdev_get_stats_ex_impl(vd, vs, vsx); mutex_exit(&vd->vdev_stat_lock); } void vdev_get_stats(vdev_t *vd, vdev_stat_t *vs) { return (vdev_get_stats_ex(vd, vs, NULL)); } void vdev_clear_stats(vdev_t *vd) { mutex_enter(&vd->vdev_stat_lock); vd->vdev_stat.vs_space = 0; vd->vdev_stat.vs_dspace = 0; vd->vdev_stat.vs_alloc = 0; mutex_exit(&vd->vdev_stat_lock); } void vdev_scan_stat_init(vdev_t *vd) { vdev_stat_t *vs = &vd->vdev_stat; for (int c = 0; c < vd->vdev_children; c++) vdev_scan_stat_init(vd->vdev_child[c]); mutex_enter(&vd->vdev_stat_lock); vs->vs_scan_processed = 0; mutex_exit(&vd->vdev_stat_lock); } void vdev_stat_update(zio_t *zio, uint64_t psize) { spa_t *spa = zio->io_spa; vdev_t *rvd = spa->spa_root_vdev; vdev_t *vd = zio->io_vd ? zio->io_vd : rvd; vdev_t *pvd; uint64_t txg = zio->io_txg; /* Suppress ASAN false positive */ #ifdef __SANITIZE_ADDRESS__ vdev_stat_t *vs = vd ? &vd->vdev_stat : NULL; vdev_stat_ex_t *vsx = vd ? &vd->vdev_stat_ex : NULL; #else vdev_stat_t *vs = &vd->vdev_stat; vdev_stat_ex_t *vsx = &vd->vdev_stat_ex; #endif zio_type_t type = zio->io_type; int flags = zio->io_flags; /* * If this i/o is a gang leader, it didn't do any actual work. */ if (zio->io_gang_tree) return; if (zio->io_error == 0) { /* * If this is a root i/o, don't count it -- we've already * counted the top-level vdevs, and vdev_get_stats() will * aggregate them when asked. This reduces contention on * the root vdev_stat_lock and implicitly handles blocks * that compress away to holes, for which there is no i/o. * (Holes never create vdev children, so all the counters * remain zero, which is what we want.) * * Note: this only applies to successful i/o (io_error == 0) * because unlike i/o counts, errors are not additive. * When reading a ditto block, for example, failure of * one top-level vdev does not imply a root-level error. */ if (vd == rvd) return; ASSERT(vd == zio->io_vd); if (flags & ZIO_FLAG_IO_BYPASS) return; mutex_enter(&vd->vdev_stat_lock); if (flags & ZIO_FLAG_IO_REPAIR) { /* * Repair is the result of a resilver issued by the * scan thread (spa_sync). */ if (flags & ZIO_FLAG_SCAN_THREAD) { dsl_scan_t *scn = spa->spa_dsl_pool->dp_scan; dsl_scan_phys_t *scn_phys = &scn->scn_phys; uint64_t *processed = &scn_phys->scn_processed; if (vd->vdev_ops->vdev_op_leaf) atomic_add_64(processed, psize); vs->vs_scan_processed += psize; } /* * Repair is the result of a rebuild issued by the * rebuild thread (vdev_rebuild_thread). To avoid * double counting repaired bytes the virtual dRAID * spare vdev is excluded from the processed bytes. */ if (zio->io_priority == ZIO_PRIORITY_REBUILD) { vdev_t *tvd = vd->vdev_top; vdev_rebuild_t *vr = &tvd->vdev_rebuild_config; vdev_rebuild_phys_t *vrp = &vr->vr_rebuild_phys; uint64_t *rebuilt = &vrp->vrp_bytes_rebuilt; if (vd->vdev_ops->vdev_op_leaf && vd->vdev_ops != &vdev_draid_spare_ops) { atomic_add_64(rebuilt, psize); } vs->vs_rebuild_processed += psize; } if (flags & ZIO_FLAG_SELF_HEAL) vs->vs_self_healed += psize; } /* * The bytes/ops/histograms are recorded at the leaf level and * aggregated into the higher level vdevs in vdev_get_stats(). */ if (vd->vdev_ops->vdev_op_leaf && (zio->io_priority < ZIO_PRIORITY_NUM_QUEUEABLE)) { zio_type_t vs_type = type; zio_priority_t priority = zio->io_priority; /* * TRIM ops and bytes are reported to user space as * ZIO_TYPE_FLUSH. This is done to preserve the * vdev_stat_t structure layout for user space. */ if (type == ZIO_TYPE_TRIM) vs_type = ZIO_TYPE_FLUSH; /* * Solely for the purposes of 'zpool iostat -lqrw' * reporting use the priority to categorize the IO. * Only the following are reported to user space: * * ZIO_PRIORITY_SYNC_READ, * ZIO_PRIORITY_SYNC_WRITE, * ZIO_PRIORITY_ASYNC_READ, * ZIO_PRIORITY_ASYNC_WRITE, * ZIO_PRIORITY_SCRUB, * ZIO_PRIORITY_TRIM, * ZIO_PRIORITY_REBUILD. */ if (priority == ZIO_PRIORITY_INITIALIZING) { ASSERT3U(type, ==, ZIO_TYPE_WRITE); priority = ZIO_PRIORITY_ASYNC_WRITE; } else if (priority == ZIO_PRIORITY_REMOVAL) { priority = ((type == ZIO_TYPE_WRITE) ? ZIO_PRIORITY_ASYNC_WRITE : ZIO_PRIORITY_ASYNC_READ); } vs->vs_ops[vs_type]++; vs->vs_bytes[vs_type] += psize; if (flags & ZIO_FLAG_DELEGATED) { vsx->vsx_agg_histo[priority] [RQ_HISTO(zio->io_size)]++; } else { vsx->vsx_ind_histo[priority] [RQ_HISTO(zio->io_size)]++; } if (zio->io_delta && zio->io_delay) { vsx->vsx_queue_histo[priority] [L_HISTO(zio->io_delta - zio->io_delay)]++; vsx->vsx_disk_histo[type] [L_HISTO(zio->io_delay)]++; vsx->vsx_total_histo[type] [L_HISTO(zio->io_delta)]++; } } mutex_exit(&vd->vdev_stat_lock); return; } if (flags & ZIO_FLAG_SPECULATIVE) return; /* * If this is an I/O error that is going to be retried, then ignore the * error. Otherwise, the user may interpret B_FAILFAST I/O errors as * hard errors, when in reality they can happen for any number of * innocuous reasons (bus resets, MPxIO link failure, etc). */ if (zio->io_error == EIO && !(zio->io_flags & ZIO_FLAG_IO_RETRY)) return; /* * Intent logs writes won't propagate their error to the root * I/O so don't mark these types of failures as pool-level * errors. */ if (zio->io_vd == NULL && (zio->io_flags & ZIO_FLAG_DONT_PROPAGATE)) return; if (type == ZIO_TYPE_WRITE && txg != 0 && (!(flags & ZIO_FLAG_IO_REPAIR) || (flags & ZIO_FLAG_SCAN_THREAD) || spa->spa_claiming)) { /* * This is either a normal write (not a repair), or it's * a repair induced by the scrub thread, or it's a repair * made by zil_claim() during spa_load() in the first txg. * In the normal case, we commit the DTL change in the same * txg as the block was born. In the scrub-induced repair * case, we know that scrubs run in first-pass syncing context, * so we commit the DTL change in spa_syncing_txg(spa). * In the zil_claim() case, we commit in spa_first_txg(spa). * * We currently do not make DTL entries for failed spontaneous * self-healing writes triggered by normal (non-scrubbing) * reads, because we have no transactional context in which to * do so -- and it's not clear that it'd be desirable anyway. */ if (vd->vdev_ops->vdev_op_leaf) { uint64_t commit_txg = txg; if (flags & ZIO_FLAG_SCAN_THREAD) { ASSERT(flags & ZIO_FLAG_IO_REPAIR); ASSERT(spa_sync_pass(spa) == 1); vdev_dtl_dirty(vd, DTL_SCRUB, txg, 1); commit_txg = spa_syncing_txg(spa); } else if (spa->spa_claiming) { ASSERT(flags & ZIO_FLAG_IO_REPAIR); commit_txg = spa_first_txg(spa); } ASSERT(commit_txg >= spa_syncing_txg(spa)); if (vdev_dtl_contains(vd, DTL_MISSING, txg, 1)) return; for (pvd = vd; pvd != rvd; pvd = pvd->vdev_parent) vdev_dtl_dirty(pvd, DTL_PARTIAL, txg, 1); vdev_dirty(vd->vdev_top, VDD_DTL, vd, commit_txg); } if (vd != rvd) vdev_dtl_dirty(vd, DTL_MISSING, txg, 1); } } int64_t vdev_deflated_space(vdev_t *vd, int64_t space) { ASSERT((space & (SPA_MINBLOCKSIZE-1)) == 0); ASSERT(vd->vdev_deflate_ratio != 0 || vd->vdev_isl2cache); return ((space >> SPA_MINBLOCKSHIFT) * vd->vdev_deflate_ratio); } /* * Update the in-core space usage stats for this vdev, its metaslab class, * and the root vdev. */ void vdev_space_update(vdev_t *vd, int64_t alloc_delta, int64_t defer_delta, int64_t space_delta) { (void) defer_delta; int64_t dspace_delta; spa_t *spa = vd->vdev_spa; vdev_t *rvd = spa->spa_root_vdev; ASSERT(vd == vd->vdev_top); /* * Apply the inverse of the psize-to-asize (ie. RAID-Z) space-expansion * factor. We must calculate this here and not at the root vdev * because the root vdev's psize-to-asize is simply the max of its * children's, thus not accurate enough for us. */ dspace_delta = vdev_deflated_space(vd, space_delta); mutex_enter(&vd->vdev_stat_lock); /* ensure we won't underflow */ if (alloc_delta < 0) { ASSERT3U(vd->vdev_stat.vs_alloc, >=, -alloc_delta); } vd->vdev_stat.vs_alloc += alloc_delta; vd->vdev_stat.vs_space += space_delta; vd->vdev_stat.vs_dspace += dspace_delta; mutex_exit(&vd->vdev_stat_lock); /* every class but log contributes to root space stats */ if (vd->vdev_mg != NULL && !vd->vdev_islog) { ASSERT(!vd->vdev_isl2cache); mutex_enter(&rvd->vdev_stat_lock); rvd->vdev_stat.vs_alloc += alloc_delta; rvd->vdev_stat.vs_space += space_delta; rvd->vdev_stat.vs_dspace += dspace_delta; mutex_exit(&rvd->vdev_stat_lock); } /* Note: metaslab_class_space_update moved to metaslab_space_update */ } /* * Mark a top-level vdev's config as dirty, placing it on the dirty list * so that it will be written out next time the vdev configuration is synced. * If the root vdev is specified (vdev_top == NULL), dirty all top-level vdevs. */ void vdev_config_dirty(vdev_t *vd) { spa_t *spa = vd->vdev_spa; vdev_t *rvd = spa->spa_root_vdev; int c; ASSERT(spa_writeable(spa)); /* * If this is an aux vdev (as with l2cache and spare devices), then we * update the vdev config manually and set the sync flag. */ if (vd->vdev_aux != NULL) { spa_aux_vdev_t *sav = vd->vdev_aux; nvlist_t **aux; uint_t naux; for (c = 0; c < sav->sav_count; c++) { if (sav->sav_vdevs[c] == vd) break; } if (c == sav->sav_count) { /* * We're being removed. There's nothing more to do. */ ASSERT(sav->sav_sync == B_TRUE); return; } sav->sav_sync = B_TRUE; if (nvlist_lookup_nvlist_array(sav->sav_config, ZPOOL_CONFIG_L2CACHE, &aux, &naux) != 0) { VERIFY(nvlist_lookup_nvlist_array(sav->sav_config, ZPOOL_CONFIG_SPARES, &aux, &naux) == 0); } ASSERT(c < naux); /* * Setting the nvlist in the middle if the array is a little * sketchy, but it will work. */ nvlist_free(aux[c]); aux[c] = vdev_config_generate(spa, vd, B_TRUE, 0); return; } /* * The dirty list is protected by the SCL_CONFIG lock. The caller * must either hold SCL_CONFIG as writer, or must be the sync thread * (which holds SCL_CONFIG as reader). There's only one sync thread, * so this is sufficient to ensure mutual exclusion. */ ASSERT(spa_config_held(spa, SCL_CONFIG, RW_WRITER) || (dsl_pool_sync_context(spa_get_dsl(spa)) && spa_config_held(spa, SCL_CONFIG, RW_READER))); if (vd == rvd) { for (c = 0; c < rvd->vdev_children; c++) vdev_config_dirty(rvd->vdev_child[c]); } else { ASSERT(vd == vd->vdev_top); if (!list_link_active(&vd->vdev_config_dirty_node) && vdev_is_concrete(vd)) { list_insert_head(&spa->spa_config_dirty_list, vd); } } } void vdev_config_clean(vdev_t *vd) { spa_t *spa = vd->vdev_spa; ASSERT(spa_config_held(spa, SCL_CONFIG, RW_WRITER) || (dsl_pool_sync_context(spa_get_dsl(spa)) && spa_config_held(spa, SCL_CONFIG, RW_READER))); ASSERT(list_link_active(&vd->vdev_config_dirty_node)); list_remove(&spa->spa_config_dirty_list, vd); } /* * Mark a top-level vdev's state as dirty, so that the next pass of * spa_sync() can convert this into vdev_config_dirty(). We distinguish * the state changes from larger config changes because they require * much less locking, and are often needed for administrative actions. */ void vdev_state_dirty(vdev_t *vd) { spa_t *spa = vd->vdev_spa; ASSERT(spa_writeable(spa)); ASSERT(vd == vd->vdev_top); /* * The state list is protected by the SCL_STATE lock. The caller * must either hold SCL_STATE as writer, or must be the sync thread * (which holds SCL_STATE as reader). There's only one sync thread, * so this is sufficient to ensure mutual exclusion. */ ASSERT(spa_config_held(spa, SCL_STATE, RW_WRITER) || (dsl_pool_sync_context(spa_get_dsl(spa)) && spa_config_held(spa, SCL_STATE, RW_READER))); if (!list_link_active(&vd->vdev_state_dirty_node) && vdev_is_concrete(vd)) list_insert_head(&spa->spa_state_dirty_list, vd); } void vdev_state_clean(vdev_t *vd) { spa_t *spa = vd->vdev_spa; ASSERT(spa_config_held(spa, SCL_STATE, RW_WRITER) || (dsl_pool_sync_context(spa_get_dsl(spa)) && spa_config_held(spa, SCL_STATE, RW_READER))); ASSERT(list_link_active(&vd->vdev_state_dirty_node)); list_remove(&spa->spa_state_dirty_list, vd); } /* * Propagate vdev state up from children to parent. */ void vdev_propagate_state(vdev_t *vd) { spa_t *spa = vd->vdev_spa; vdev_t *rvd = spa->spa_root_vdev; int degraded = 0, faulted = 0; int corrupted = 0; vdev_t *child; if (vd->vdev_children > 0) { for (int c = 0; c < vd->vdev_children; c++) { child = vd->vdev_child[c]; /* * Don't factor holes or indirect vdevs into the * decision. */ if (!vdev_is_concrete(child)) continue; if (!vdev_readable(child) || (!vdev_writeable(child) && spa_writeable(spa))) { /* * Root special: if there is a top-level log * device, treat the root vdev as if it were * degraded. */ if (child->vdev_islog && vd == rvd) degraded++; else faulted++; } else if (child->vdev_state <= VDEV_STATE_DEGRADED) { degraded++; } if (child->vdev_stat.vs_aux == VDEV_AUX_CORRUPT_DATA) corrupted++; } vd->vdev_ops->vdev_op_state_change(vd, faulted, degraded); /* * Root special: if there is a top-level vdev that cannot be * opened due to corrupted metadata, then propagate the root * vdev's aux state as 'corrupt' rather than 'insufficient * replicas'. */ if (corrupted && vd == rvd && rvd->vdev_state == VDEV_STATE_CANT_OPEN) vdev_set_state(rvd, B_FALSE, VDEV_STATE_CANT_OPEN, VDEV_AUX_CORRUPT_DATA); } if (vd->vdev_parent) vdev_propagate_state(vd->vdev_parent); } /* * Set a vdev's state. If this is during an open, we don't update the parent * state, because we're in the process of opening children depth-first. * Otherwise, we propagate the change to the parent. * * If this routine places a device in a faulted state, an appropriate ereport is * generated. */ void vdev_set_state(vdev_t *vd, boolean_t isopen, vdev_state_t state, vdev_aux_t aux) { uint64_t save_state; spa_t *spa = vd->vdev_spa; if (state == vd->vdev_state) { /* * Since vdev_offline() code path is already in an offline * state we can miss a statechange event to OFFLINE. Check * the previous state to catch this condition. */ if (vd->vdev_ops->vdev_op_leaf && (state == VDEV_STATE_OFFLINE) && (vd->vdev_prevstate >= VDEV_STATE_FAULTED)) { /* post an offline state change */ zfs_post_state_change(spa, vd, vd->vdev_prevstate); } vd->vdev_stat.vs_aux = aux; return; } save_state = vd->vdev_state; vd->vdev_state = state; vd->vdev_stat.vs_aux = aux; /* * If we are setting the vdev state to anything but an open state, then * always close the underlying device unless the device has requested * a delayed close (i.e. we're about to remove or fault the device). * Otherwise, we keep accessible but invalid devices open forever. * We don't call vdev_close() itself, because that implies some extra * checks (offline, etc) that we don't want here. This is limited to * leaf devices, because otherwise closing the device will affect other * children. */ if (!vd->vdev_delayed_close && vdev_is_dead(vd) && vd->vdev_ops->vdev_op_leaf) vd->vdev_ops->vdev_op_close(vd); if (vd->vdev_removed && state == VDEV_STATE_CANT_OPEN && (aux == VDEV_AUX_OPEN_FAILED || vd->vdev_checkremove)) { /* * If the previous state is set to VDEV_STATE_REMOVED, then this * device was previously marked removed and someone attempted to * reopen it. If this failed due to a nonexistent device, then * keep the device in the REMOVED state. We also let this be if * it is one of our special test online cases, which is only * attempting to online the device and shouldn't generate an FMA * fault. */ vd->vdev_state = VDEV_STATE_REMOVED; vd->vdev_stat.vs_aux = VDEV_AUX_NONE; } else if (state == VDEV_STATE_REMOVED) { vd->vdev_removed = B_TRUE; } else if (state == VDEV_STATE_CANT_OPEN) { /* * If we fail to open a vdev during an import or recovery, we * mark it as "not available", which signifies that it was * never there to begin with. Failure to open such a device * is not considered an error. */ if ((spa_load_state(spa) == SPA_LOAD_IMPORT || spa_load_state(spa) == SPA_LOAD_RECOVER) && vd->vdev_ops->vdev_op_leaf) vd->vdev_not_present = 1; /* * Post the appropriate ereport. If the 'prevstate' field is * set to something other than VDEV_STATE_UNKNOWN, it indicates * that this is part of a vdev_reopen(). In this case, we don't * want to post the ereport if the device was already in the * CANT_OPEN state beforehand. * * If the 'checkremove' flag is set, then this is an attempt to * online the device in response to an insertion event. If we * hit this case, then we have detected an insertion event for a * faulted or offline device that wasn't in the removed state. * In this scenario, we don't post an ereport because we are * about to replace the device, or attempt an online with * vdev_forcefault, which will generate the fault for us. */ if ((vd->vdev_prevstate != state || vd->vdev_forcefault) && !vd->vdev_not_present && !vd->vdev_checkremove && vd != spa->spa_root_vdev) { const char *class; switch (aux) { case VDEV_AUX_OPEN_FAILED: class = FM_EREPORT_ZFS_DEVICE_OPEN_FAILED; break; case VDEV_AUX_CORRUPT_DATA: class = FM_EREPORT_ZFS_DEVICE_CORRUPT_DATA; break; case VDEV_AUX_NO_REPLICAS: class = FM_EREPORT_ZFS_DEVICE_NO_REPLICAS; break; case VDEV_AUX_BAD_GUID_SUM: class = FM_EREPORT_ZFS_DEVICE_BAD_GUID_SUM; break; case VDEV_AUX_TOO_SMALL: class = FM_EREPORT_ZFS_DEVICE_TOO_SMALL; break; case VDEV_AUX_BAD_LABEL: class = FM_EREPORT_ZFS_DEVICE_BAD_LABEL; break; case VDEV_AUX_BAD_ASHIFT: class = FM_EREPORT_ZFS_DEVICE_BAD_ASHIFT; break; default: class = FM_EREPORT_ZFS_DEVICE_UNKNOWN; } (void) zfs_ereport_post(class, spa, vd, NULL, NULL, save_state); } /* Erase any notion of persistent removed state */ vd->vdev_removed = B_FALSE; } else { vd->vdev_removed = B_FALSE; } /* * Notify ZED of any significant state-change on a leaf vdev. * */ if (vd->vdev_ops->vdev_op_leaf) { /* preserve original state from a vdev_reopen() */ if ((vd->vdev_prevstate != VDEV_STATE_UNKNOWN) && (vd->vdev_prevstate != vd->vdev_state) && (save_state <= VDEV_STATE_CLOSED)) save_state = vd->vdev_prevstate; /* filter out state change due to initial vdev_open */ if (save_state > VDEV_STATE_CLOSED) zfs_post_state_change(spa, vd, save_state); } if (!isopen && vd->vdev_parent) vdev_propagate_state(vd->vdev_parent); } boolean_t vdev_children_are_offline(vdev_t *vd) { ASSERT(!vd->vdev_ops->vdev_op_leaf); for (uint64_t i = 0; i < vd->vdev_children; i++) { if (vd->vdev_child[i]->vdev_state != VDEV_STATE_OFFLINE) return (B_FALSE); } return (B_TRUE); } /* * Check the vdev configuration to ensure that it's capable of supporting * a root pool. We do not support partial configuration. */ boolean_t vdev_is_bootable(vdev_t *vd) { if (!vd->vdev_ops->vdev_op_leaf) { const char *vdev_type = vd->vdev_ops->vdev_op_type; if (strcmp(vdev_type, VDEV_TYPE_MISSING) == 0) return (B_FALSE); } for (int c = 0; c < vd->vdev_children; c++) { if (!vdev_is_bootable(vd->vdev_child[c])) return (B_FALSE); } return (B_TRUE); } boolean_t vdev_is_concrete(vdev_t *vd) { vdev_ops_t *ops = vd->vdev_ops; if (ops == &vdev_indirect_ops || ops == &vdev_hole_ops || ops == &vdev_missing_ops || ops == &vdev_root_ops) { return (B_FALSE); } else { return (B_TRUE); } } /* * Determine if a log device has valid content. If the vdev was * removed or faulted in the MOS config then we know that * the content on the log device has already been written to the pool. */ boolean_t vdev_log_state_valid(vdev_t *vd) { if (vd->vdev_ops->vdev_op_leaf && !vd->vdev_faulted && !vd->vdev_removed) return (B_TRUE); for (int c = 0; c < vd->vdev_children; c++) if (vdev_log_state_valid(vd->vdev_child[c])) return (B_TRUE); return (B_FALSE); } /* * Expand a vdev if possible. */ void vdev_expand(vdev_t *vd, uint64_t txg) { ASSERT(vd->vdev_top == vd); ASSERT(spa_config_held(vd->vdev_spa, SCL_ALL, RW_WRITER) == SCL_ALL); ASSERT(vdev_is_concrete(vd)); vdev_set_deflate_ratio(vd); if ((vd->vdev_spa->spa_raidz_expand == NULL || vd->vdev_spa->spa_raidz_expand->vre_vdev_id != vd->vdev_id) && (vd->vdev_asize >> vd->vdev_ms_shift) > vd->vdev_ms_count && vdev_is_concrete(vd)) { vdev_metaslab_group_create(vd); VERIFY(vdev_metaslab_init(vd, txg) == 0); vdev_config_dirty(vd); } } /* * Split a vdev. */ void vdev_split(vdev_t *vd) { vdev_t *cvd, *pvd = vd->vdev_parent; VERIFY3U(pvd->vdev_children, >, 1); vdev_remove_child(pvd, vd); vdev_compact_children(pvd); ASSERT3P(pvd->vdev_child, !=, NULL); cvd = pvd->vdev_child[0]; if (pvd->vdev_children == 1) { vdev_remove_parent(cvd); cvd->vdev_splitting = B_TRUE; } vdev_propagate_state(cvd); } void vdev_deadman(vdev_t *vd, const char *tag) { for (int c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; vdev_deadman(cvd, tag); } if (vd->vdev_ops->vdev_op_leaf) { vdev_queue_t *vq = &vd->vdev_queue; mutex_enter(&vq->vq_lock); if (vq->vq_active > 0) { spa_t *spa = vd->vdev_spa; zio_t *fio; uint64_t delta; zfs_dbgmsg("slow vdev: %s has %u active IOs", vd->vdev_path, vq->vq_active); /* * Look at the head of all the pending queues, * if any I/O has been outstanding for longer than * the spa_deadman_synctime invoke the deadman logic. */ fio = list_head(&vq->vq_active_list); delta = gethrtime() - fio->io_timestamp; if (delta > spa_deadman_synctime(spa)) zio_deadman(fio, tag); } mutex_exit(&vq->vq_lock); } } void vdev_defer_resilver(vdev_t *vd) { ASSERT(vd->vdev_ops->vdev_op_leaf); vd->vdev_resilver_deferred = B_TRUE; vd->vdev_spa->spa_resilver_deferred = B_TRUE; } /* * Clears the resilver deferred flag on all leaf devs under vd. Returns * B_TRUE if we have devices that need to be resilvered and are available to * accept resilver I/Os. */ boolean_t vdev_clear_resilver_deferred(vdev_t *vd, dmu_tx_t *tx) { boolean_t resilver_needed = B_FALSE; spa_t *spa = vd->vdev_spa; for (int c = 0; c < vd->vdev_children; c++) { vdev_t *cvd = vd->vdev_child[c]; resilver_needed |= vdev_clear_resilver_deferred(cvd, tx); } if (vd == spa->spa_root_vdev && spa_feature_is_active(spa, SPA_FEATURE_RESILVER_DEFER)) { spa_feature_decr(spa, SPA_FEATURE_RESILVER_DEFER, tx); vdev_config_dirty(vd); spa->spa_resilver_deferred = B_FALSE; return (resilver_needed); } if (!vdev_is_concrete(vd) || vd->vdev_aux || !vd->vdev_ops->vdev_op_leaf) return (resilver_needed); vd->vdev_resilver_deferred = B_FALSE; return (!vdev_is_dead(vd) && !vd->vdev_offline && vdev_resilver_needed(vd, NULL, NULL)); } boolean_t vdev_xlate_is_empty(range_seg64_t *rs) { return (rs->rs_start == rs->rs_end); } /* * Translate a logical range to the first contiguous physical range for the * specified vdev_t. This function is initially called with a leaf vdev and * will walk each parent vdev until it reaches a top-level vdev. Once the * top-level is reached the physical range is initialized and the recursive * function begins to unwind. As it unwinds it calls the parent's vdev * specific translation function to do the real conversion. */ void vdev_xlate(vdev_t *vd, const range_seg64_t *logical_rs, range_seg64_t *physical_rs, range_seg64_t *remain_rs) { /* * Walk up the vdev tree */ if (vd != vd->vdev_top) { vdev_xlate(vd->vdev_parent, logical_rs, physical_rs, remain_rs); } else { /* * We've reached the top-level vdev, initialize the physical * range to the logical range and set an empty remaining * range then start to unwind. */ physical_rs->rs_start = logical_rs->rs_start; physical_rs->rs_end = logical_rs->rs_end; remain_rs->rs_start = logical_rs->rs_start; remain_rs->rs_end = logical_rs->rs_start; return; } vdev_t *pvd = vd->vdev_parent; ASSERT3P(pvd, !=, NULL); ASSERT3P(pvd->vdev_ops->vdev_op_xlate, !=, NULL); /* * As this recursive function unwinds, translate the logical * range into its physical and any remaining components by calling * the vdev specific translate function. */ range_seg64_t intermediate = { 0 }; pvd->vdev_ops->vdev_op_xlate(vd, physical_rs, &intermediate, remain_rs); physical_rs->rs_start = intermediate.rs_start; physical_rs->rs_end = intermediate.rs_end; } void vdev_xlate_walk(vdev_t *vd, const range_seg64_t *logical_rs, vdev_xlate_func_t *func, void *arg) { range_seg64_t iter_rs = *logical_rs; range_seg64_t physical_rs; range_seg64_t remain_rs; while (!vdev_xlate_is_empty(&iter_rs)) { vdev_xlate(vd, &iter_rs, &physical_rs, &remain_rs); /* * With raidz and dRAID, it's possible that the logical range * does not live on this leaf vdev. Only when there is a non- * zero physical size call the provided function. */ if (!vdev_xlate_is_empty(&physical_rs)) func(arg, &physical_rs); iter_rs = remain_rs; } } static char * vdev_name(vdev_t *vd, char *buf, int buflen) { if (vd->vdev_path == NULL) { if (strcmp(vd->vdev_ops->vdev_op_type, "root") == 0) { strlcpy(buf, vd->vdev_spa->spa_name, buflen); } else if (!vd->vdev_ops->vdev_op_leaf) { snprintf(buf, buflen, "%s-%llu", vd->vdev_ops->vdev_op_type, (u_longlong_t)vd->vdev_id); } } else { strlcpy(buf, vd->vdev_path, buflen); } return (buf); } /* * Look at the vdev tree and determine whether any devices are currently being * replaced. */ boolean_t vdev_replace_in_progress(vdev_t *vdev) { ASSERT(spa_config_held(vdev->vdev_spa, SCL_ALL, RW_READER) != 0); if (vdev->vdev_ops == &vdev_replacing_ops) return (B_TRUE); /* * A 'spare' vdev indicates that we have a replace in progress, unless * it has exactly two children, and the second, the hot spare, has * finished being resilvered. */ if (vdev->vdev_ops == &vdev_spare_ops && (vdev->vdev_children > 2 || !vdev_dtl_empty(vdev->vdev_child[1], DTL_MISSING))) return (B_TRUE); for (int i = 0; i < vdev->vdev_children; i++) { if (vdev_replace_in_progress(vdev->vdev_child[i])) return (B_TRUE); } return (B_FALSE); } /* * Add a (source=src, propname=propval) list to an nvlist. */ static void vdev_prop_add_list(nvlist_t *nvl, const char *propname, const char *strval, uint64_t intval, zprop_source_t src) { nvlist_t *propval; propval = fnvlist_alloc(); fnvlist_add_uint64(propval, ZPROP_SOURCE, src); if (strval != NULL) fnvlist_add_string(propval, ZPROP_VALUE, strval); else fnvlist_add_uint64(propval, ZPROP_VALUE, intval); fnvlist_add_nvlist(nvl, propname, propval); nvlist_free(propval); } static void vdev_props_set_sync(void *arg, dmu_tx_t *tx) { vdev_t *vd; nvlist_t *nvp = arg; spa_t *spa = dmu_tx_pool(tx)->dp_spa; objset_t *mos = spa->spa_meta_objset; nvpair_t *elem = NULL; uint64_t vdev_guid; uint64_t objid; nvlist_t *nvprops; vdev_guid = fnvlist_lookup_uint64(nvp, ZPOOL_VDEV_PROPS_SET_VDEV); nvprops = fnvlist_lookup_nvlist(nvp, ZPOOL_VDEV_PROPS_SET_PROPS); vd = spa_lookup_by_guid(spa, vdev_guid, B_TRUE); /* this vdev could get removed while waiting for this sync task */ if (vd == NULL) return; /* * Set vdev property values in the vdev props mos object. */ if (vd->vdev_root_zap != 0) { objid = vd->vdev_root_zap; } else if (vd->vdev_top_zap != 0) { objid = vd->vdev_top_zap; } else if (vd->vdev_leaf_zap != 0) { objid = vd->vdev_leaf_zap; } else { panic("unexpected vdev type"); } mutex_enter(&spa->spa_props_lock); while ((elem = nvlist_next_nvpair(nvprops, elem)) != NULL) { uint64_t intval; const char *strval; vdev_prop_t prop; const char *propname = nvpair_name(elem); zprop_type_t proptype; switch (prop = vdev_name_to_prop(propname)) { case VDEV_PROP_USERPROP: if (vdev_prop_user(propname)) { strval = fnvpair_value_string(elem); if (strlen(strval) == 0) { /* remove the property if value == "" */ (void) zap_remove(mos, objid, propname, tx); } else { VERIFY0(zap_update(mos, objid, propname, 1, strlen(strval) + 1, strval, tx)); } spa_history_log_internal(spa, "vdev set", tx, "vdev_guid=%llu: %s=%s", (u_longlong_t)vdev_guid, nvpair_name(elem), strval); } break; default: /* normalize the property name */ propname = vdev_prop_to_name(prop); proptype = vdev_prop_get_type(prop); if (nvpair_type(elem) == DATA_TYPE_STRING) { ASSERT(proptype == PROP_TYPE_STRING); strval = fnvpair_value_string(elem); VERIFY0(zap_update(mos, objid, propname, 1, strlen(strval) + 1, strval, tx)); spa_history_log_internal(spa, "vdev set", tx, "vdev_guid=%llu: %s=%s", (u_longlong_t)vdev_guid, nvpair_name(elem), strval); } else if (nvpair_type(elem) == DATA_TYPE_UINT64) { intval = fnvpair_value_uint64(elem); if (proptype == PROP_TYPE_INDEX) { const char *unused; VERIFY0(vdev_prop_index_to_string( prop, intval, &unused)); } VERIFY0(zap_update(mos, objid, propname, sizeof (uint64_t), 1, &intval, tx)); spa_history_log_internal(spa, "vdev set", tx, "vdev_guid=%llu: %s=%lld", (u_longlong_t)vdev_guid, nvpair_name(elem), (longlong_t)intval); } else { panic("invalid vdev property type %u", nvpair_type(elem)); } } } mutex_exit(&spa->spa_props_lock); } int vdev_prop_set(vdev_t *vd, nvlist_t *innvl, nvlist_t *outnvl) { spa_t *spa = vd->vdev_spa; nvpair_t *elem = NULL; uint64_t vdev_guid; nvlist_t *nvprops; int error = 0; ASSERT(vd != NULL); /* Check that vdev has a zap we can use */ if (vd->vdev_root_zap == 0 && vd->vdev_top_zap == 0 && vd->vdev_leaf_zap == 0) return (SET_ERROR(EINVAL)); if (nvlist_lookup_uint64(innvl, ZPOOL_VDEV_PROPS_SET_VDEV, &vdev_guid) != 0) return (SET_ERROR(EINVAL)); if (nvlist_lookup_nvlist(innvl, ZPOOL_VDEV_PROPS_SET_PROPS, &nvprops) != 0) return (SET_ERROR(EINVAL)); if ((vd = spa_lookup_by_guid(spa, vdev_guid, B_TRUE)) == NULL) return (SET_ERROR(EINVAL)); while ((elem = nvlist_next_nvpair(nvprops, elem)) != NULL) { const char *propname = nvpair_name(elem); vdev_prop_t prop = vdev_name_to_prop(propname); uint64_t intval = 0; const char *strval = NULL; if (prop == VDEV_PROP_USERPROP && !vdev_prop_user(propname)) { error = EINVAL; goto end; } if (vdev_prop_readonly(prop)) { error = EROFS; goto end; } /* Special Processing */ switch (prop) { case VDEV_PROP_PATH: if (vd->vdev_path == NULL) { error = EROFS; break; } if (nvpair_value_string(elem, &strval) != 0) { error = EINVAL; break; } /* New path must start with /dev/ */ if (strncmp(strval, "/dev/", 5)) { error = EINVAL; break; } error = spa_vdev_setpath(spa, vdev_guid, strval); break; case VDEV_PROP_ALLOCATING: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } if (intval != vd->vdev_noalloc) break; if (intval == 0) error = spa_vdev_noalloc(spa, vdev_guid); else error = spa_vdev_alloc(spa, vdev_guid); break; case VDEV_PROP_FAILFAST: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } vd->vdev_failfast = intval & 1; break; case VDEV_PROP_CHECKSUM_N: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } vd->vdev_checksum_n = intval; break; case VDEV_PROP_CHECKSUM_T: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } vd->vdev_checksum_t = intval; break; case VDEV_PROP_IO_N: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } vd->vdev_io_n = intval; break; case VDEV_PROP_IO_T: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } vd->vdev_io_t = intval; break; case VDEV_PROP_SLOW_IO_N: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } vd->vdev_slow_io_n = intval; break; case VDEV_PROP_SLOW_IO_T: if (nvpair_value_uint64(elem, &intval) != 0) { error = EINVAL; break; } vd->vdev_slow_io_t = intval; break; default: /* Most processing is done in vdev_props_set_sync */ break; } end: if (error != 0) { intval = error; vdev_prop_add_list(outnvl, propname, strval, intval, 0); return (error); } } return (dsl_sync_task(spa->spa_name, NULL, vdev_props_set_sync, innvl, 6, ZFS_SPACE_CHECK_EXTRA_RESERVED)); } int vdev_prop_get(vdev_t *vd, nvlist_t *innvl, nvlist_t *outnvl) { spa_t *spa = vd->vdev_spa; objset_t *mos = spa->spa_meta_objset; int err = 0; uint64_t objid; uint64_t vdev_guid; nvpair_t *elem = NULL; nvlist_t *nvprops = NULL; uint64_t intval = 0; char *strval = NULL; const char *propname = NULL; vdev_prop_t prop; ASSERT(vd != NULL); ASSERT(mos != NULL); if (nvlist_lookup_uint64(innvl, ZPOOL_VDEV_PROPS_GET_VDEV, &vdev_guid) != 0) return (SET_ERROR(EINVAL)); nvlist_lookup_nvlist(innvl, ZPOOL_VDEV_PROPS_GET_PROPS, &nvprops); if (vd->vdev_root_zap != 0) { objid = vd->vdev_root_zap; } else if (vd->vdev_top_zap != 0) { objid = vd->vdev_top_zap; } else if (vd->vdev_leaf_zap != 0) { objid = vd->vdev_leaf_zap; } else { return (SET_ERROR(EINVAL)); } ASSERT(objid != 0); mutex_enter(&spa->spa_props_lock); if (nvprops != NULL) { char namebuf[64] = { 0 }; while ((elem = nvlist_next_nvpair(nvprops, elem)) != NULL) { intval = 0; strval = NULL; propname = nvpair_name(elem); prop = vdev_name_to_prop(propname); zprop_source_t src = ZPROP_SRC_DEFAULT; uint64_t integer_size, num_integers; switch (prop) { /* Special Read-only Properties */ case VDEV_PROP_NAME: strval = vdev_name(vd, namebuf, sizeof (namebuf)); if (strval == NULL) continue; vdev_prop_add_list(outnvl, propname, strval, 0, ZPROP_SRC_NONE); continue; case VDEV_PROP_CAPACITY: /* percent used */ intval = (vd->vdev_stat.vs_dspace == 0) ? 0 : (vd->vdev_stat.vs_alloc * 100 / vd->vdev_stat.vs_dspace); vdev_prop_add_list(outnvl, propname, NULL, intval, ZPROP_SRC_NONE); continue; case VDEV_PROP_STATE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_state, ZPROP_SRC_NONE); continue; case VDEV_PROP_GUID: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_guid, ZPROP_SRC_NONE); continue; case VDEV_PROP_ASIZE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_asize, ZPROP_SRC_NONE); continue; case VDEV_PROP_PSIZE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_psize, ZPROP_SRC_NONE); continue; case VDEV_PROP_ASHIFT: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_ashift, ZPROP_SRC_NONE); continue; case VDEV_PROP_SIZE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_dspace, ZPROP_SRC_NONE); continue; case VDEV_PROP_FREE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_dspace - vd->vdev_stat.vs_alloc, ZPROP_SRC_NONE); continue; case VDEV_PROP_ALLOCATED: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_alloc, ZPROP_SRC_NONE); continue; case VDEV_PROP_EXPANDSZ: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_esize, ZPROP_SRC_NONE); continue; case VDEV_PROP_FRAGMENTATION: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_fragmentation, ZPROP_SRC_NONE); continue; case VDEV_PROP_PARITY: vdev_prop_add_list(outnvl, propname, NULL, vdev_get_nparity(vd), ZPROP_SRC_NONE); continue; case VDEV_PROP_PATH: if (vd->vdev_path == NULL) continue; vdev_prop_add_list(outnvl, propname, vd->vdev_path, 0, ZPROP_SRC_NONE); continue; case VDEV_PROP_DEVID: if (vd->vdev_devid == NULL) continue; vdev_prop_add_list(outnvl, propname, vd->vdev_devid, 0, ZPROP_SRC_NONE); continue; case VDEV_PROP_PHYS_PATH: if (vd->vdev_physpath == NULL) continue; vdev_prop_add_list(outnvl, propname, vd->vdev_physpath, 0, ZPROP_SRC_NONE); continue; case VDEV_PROP_ENC_PATH: if (vd->vdev_enc_sysfs_path == NULL) continue; vdev_prop_add_list(outnvl, propname, vd->vdev_enc_sysfs_path, 0, ZPROP_SRC_NONE); continue; case VDEV_PROP_FRU: if (vd->vdev_fru == NULL) continue; vdev_prop_add_list(outnvl, propname, vd->vdev_fru, 0, ZPROP_SRC_NONE); continue; case VDEV_PROP_PARENT: if (vd->vdev_parent != NULL) { strval = vdev_name(vd->vdev_parent, namebuf, sizeof (namebuf)); vdev_prop_add_list(outnvl, propname, strval, 0, ZPROP_SRC_NONE); } continue; case VDEV_PROP_CHILDREN: if (vd->vdev_children > 0) strval = kmem_zalloc(ZAP_MAXVALUELEN, KM_SLEEP); for (uint64_t i = 0; i < vd->vdev_children; i++) { const char *vname; vname = vdev_name(vd->vdev_child[i], namebuf, sizeof (namebuf)); if (vname == NULL) vname = "(unknown)"; if (strlen(strval) > 0) strlcat(strval, ",", ZAP_MAXVALUELEN); strlcat(strval, vname, ZAP_MAXVALUELEN); } if (strval != NULL) { vdev_prop_add_list(outnvl, propname, strval, 0, ZPROP_SRC_NONE); kmem_free(strval, ZAP_MAXVALUELEN); } continue; case VDEV_PROP_NUMCHILDREN: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_children, ZPROP_SRC_NONE); continue; case VDEV_PROP_READ_ERRORS: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_read_errors, ZPROP_SRC_NONE); continue; case VDEV_PROP_WRITE_ERRORS: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_write_errors, ZPROP_SRC_NONE); continue; case VDEV_PROP_CHECKSUM_ERRORS: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_checksum_errors, ZPROP_SRC_NONE); continue; case VDEV_PROP_INITIALIZE_ERRORS: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_initialize_errors, ZPROP_SRC_NONE); continue; case VDEV_PROP_TRIM_ERRORS: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_trim_errors, ZPROP_SRC_NONE); continue; case VDEV_PROP_SLOW_IOS: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_slow_ios, ZPROP_SRC_NONE); continue; case VDEV_PROP_OPS_NULL: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_ops[ZIO_TYPE_NULL], ZPROP_SRC_NONE); continue; case VDEV_PROP_OPS_READ: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_ops[ZIO_TYPE_READ], ZPROP_SRC_NONE); continue; case VDEV_PROP_OPS_WRITE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_ops[ZIO_TYPE_WRITE], ZPROP_SRC_NONE); continue; case VDEV_PROP_OPS_FREE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_ops[ZIO_TYPE_FREE], ZPROP_SRC_NONE); continue; case VDEV_PROP_OPS_CLAIM: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_ops[ZIO_TYPE_CLAIM], ZPROP_SRC_NONE); continue; case VDEV_PROP_OPS_TRIM: /* * TRIM ops and bytes are reported to user * space as ZIO_TYPE_FLUSH. This is done to * preserve the vdev_stat_t structure layout * for user space. */ vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_ops[ZIO_TYPE_FLUSH], ZPROP_SRC_NONE); continue; case VDEV_PROP_BYTES_NULL: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_bytes[ZIO_TYPE_NULL], ZPROP_SRC_NONE); continue; case VDEV_PROP_BYTES_READ: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_bytes[ZIO_TYPE_READ], ZPROP_SRC_NONE); continue; case VDEV_PROP_BYTES_WRITE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_bytes[ZIO_TYPE_WRITE], ZPROP_SRC_NONE); continue; case VDEV_PROP_BYTES_FREE: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_bytes[ZIO_TYPE_FREE], ZPROP_SRC_NONE); continue; case VDEV_PROP_BYTES_CLAIM: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_bytes[ZIO_TYPE_CLAIM], ZPROP_SRC_NONE); continue; case VDEV_PROP_BYTES_TRIM: /* * TRIM ops and bytes are reported to user * space as ZIO_TYPE_FLUSH. This is done to * preserve the vdev_stat_t structure layout * for user space. */ vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_stat.vs_bytes[ZIO_TYPE_FLUSH], ZPROP_SRC_NONE); continue; case VDEV_PROP_REMOVING: vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_removing, ZPROP_SRC_NONE); continue; case VDEV_PROP_RAIDZ_EXPANDING: /* Only expose this for raidz */ if (vd->vdev_ops == &vdev_raidz_ops) { vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_rz_expanding, ZPROP_SRC_NONE); } continue; case VDEV_PROP_TRIM_SUPPORT: /* only valid for leaf vdevs */ if (vd->vdev_ops->vdev_op_leaf) { vdev_prop_add_list(outnvl, propname, NULL, vd->vdev_has_trim, ZPROP_SRC_NONE); } continue; /* Numeric Properites */ case VDEV_PROP_ALLOCATING: /* Leaf vdevs cannot have this property */ if (vd->vdev_mg == NULL && vd->vdev_top != NULL) { src = ZPROP_SRC_NONE; intval = ZPROP_BOOLEAN_NA; } else { err = vdev_prop_get_int(vd, prop, &intval); if (err && err != ENOENT) break; if (intval == vdev_prop_default_numeric(prop)) src = ZPROP_SRC_DEFAULT; else src = ZPROP_SRC_LOCAL; } vdev_prop_add_list(outnvl, propname, NULL, intval, src); break; case VDEV_PROP_FAILFAST: src = ZPROP_SRC_LOCAL; strval = NULL; err = zap_lookup(mos, objid, nvpair_name(elem), sizeof (uint64_t), 1, &intval); if (err == ENOENT) { intval = vdev_prop_default_numeric( prop); err = 0; } else if (err) { break; } if (intval == vdev_prop_default_numeric(prop)) src = ZPROP_SRC_DEFAULT; vdev_prop_add_list(outnvl, propname, strval, intval, src); break; case VDEV_PROP_CHECKSUM_N: case VDEV_PROP_CHECKSUM_T: case VDEV_PROP_IO_N: case VDEV_PROP_IO_T: case VDEV_PROP_SLOW_IO_N: case VDEV_PROP_SLOW_IO_T: err = vdev_prop_get_int(vd, prop, &intval); if (err && err != ENOENT) break; if (intval == vdev_prop_default_numeric(prop)) src = ZPROP_SRC_DEFAULT; else src = ZPROP_SRC_LOCAL; vdev_prop_add_list(outnvl, propname, NULL, intval, src); break; /* Text Properties */ case VDEV_PROP_COMMENT: /* Exists in the ZAP below */ /* FALLTHRU */ case VDEV_PROP_USERPROP: /* User Properites */ src = ZPROP_SRC_LOCAL; err = zap_length(mos, objid, nvpair_name(elem), &integer_size, &num_integers); if (err) break; switch (integer_size) { case 8: /* User properties cannot be integers */ err = EINVAL; break; case 1: /* string property */ strval = kmem_alloc(num_integers, KM_SLEEP); err = zap_lookup(mos, objid, nvpair_name(elem), 1, num_integers, strval); if (err) { kmem_free(strval, num_integers); break; } vdev_prop_add_list(outnvl, propname, strval, 0, src); kmem_free(strval, num_integers); break; } break; default: err = ENOENT; break; } if (err) break; } } else { /* * Get all properties from the MOS vdev property object. */ zap_cursor_t zc; zap_attribute_t za; for (zap_cursor_init(&zc, mos, objid); (err = zap_cursor_retrieve(&zc, &za)) == 0; zap_cursor_advance(&zc)) { intval = 0; strval = NULL; zprop_source_t src = ZPROP_SRC_DEFAULT; propname = za.za_name; switch (za.za_integer_length) { case 8: /* We do not allow integer user properties */ /* This is likely an internal value */ break; case 1: /* string property */ strval = kmem_alloc(za.za_num_integers, KM_SLEEP); err = zap_lookup(mos, objid, za.za_name, 1, za.za_num_integers, strval); if (err) { kmem_free(strval, za.za_num_integers); break; } vdev_prop_add_list(outnvl, propname, strval, 0, src); kmem_free(strval, za.za_num_integers); break; default: break; } } zap_cursor_fini(&zc); } mutex_exit(&spa->spa_props_lock); if (err && err != ENOENT) { return (err); } return (0); } EXPORT_SYMBOL(vdev_fault); EXPORT_SYMBOL(vdev_degrade); EXPORT_SYMBOL(vdev_online); EXPORT_SYMBOL(vdev_offline); EXPORT_SYMBOL(vdev_clear); ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, default_ms_count, UINT, ZMOD_RW, "Target number of metaslabs per top-level vdev"); ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, default_ms_shift, UINT, ZMOD_RW, "Default lower limit for metaslab size"); ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, max_ms_shift, UINT, ZMOD_RW, "Default upper limit for metaslab size"); ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, min_ms_count, UINT, ZMOD_RW, "Minimum number of metaslabs per top-level vdev"); ZFS_MODULE_PARAM(zfs_vdev, zfs_vdev_, ms_count_limit, UINT, ZMOD_RW, "Practical upper limit of total metaslabs per top-level vdev"); ZFS_MODULE_PARAM(zfs, zfs_, slow_io_events_per_second, UINT, ZMOD_RW, "Rate limit slow IO (delay) events to this many per second"); ZFS_MODULE_PARAM(zfs, zfs_, deadman_events_per_second, UINT, ZMOD_RW, "Rate limit hung IO (deadman) events to this many per second"); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM(zfs, zfs_, checksum_events_per_second, UINT, ZMOD_RW, "Rate limit checksum events to this many checksum errors per second " "(do not set below ZED threshold)."); /* END CSTYLED */ ZFS_MODULE_PARAM(zfs, zfs_, scan_ignore_errors, INT, ZMOD_RW, "Ignore errors during resilver/scrub"); ZFS_MODULE_PARAM(zfs_vdev, vdev_, validate_skip, INT, ZMOD_RW, "Bypass vdev_validate()"); ZFS_MODULE_PARAM(zfs, zfs_, nocacheflush, INT, ZMOD_RW, "Disable cache flushes"); ZFS_MODULE_PARAM(zfs, zfs_, embedded_slog_min_ms, UINT, ZMOD_RW, "Minimum number of metaslabs required to dedicate one for log blocks"); /* BEGIN CSTYLED */ ZFS_MODULE_PARAM_CALL(zfs_vdev, zfs_vdev_, min_auto_ashift, param_set_min_auto_ashift, param_get_uint, ZMOD_RW, "Minimum ashift used when creating new top-level vdevs"); ZFS_MODULE_PARAM_CALL(zfs_vdev, zfs_vdev_, max_auto_ashift, param_set_max_auto_ashift, param_get_uint, ZMOD_RW, "Maximum ashift used when optimizing for logical -> physical sector " "size on new top-level vdevs"); /* END CSTYLED */