/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License Version 1.0 (CDDL-1.0). * You can obtain a copy of the license from the top-level file * "OPENSOLARIS.LICENSE" or at . * You may not use this file except in compliance with the license. * * CDDL HEADER END */ /* * Copyright (c) 2016, Intel Corporation. */ #ifdef HAVE_LIBUDEV #include #include #include #include #include #include #include #include #include #include #include "zed_log.h" #include "zed_disk_event.h" #include "agents/zfs_agents.h" /* * Portions of ZED need to see disk events for disks belonging to ZFS pools. * A libudev monitor is established to monitor block device actions and pass * them on to internal ZED logic modules. Initially, zfs_mod.c is the only * consumer and is the Linux equivalent for the illumos syseventd ZFS SLM * module responsible for handeling disk events for ZFS. */ pthread_t g_mon_tid; struct udev *g_udev; struct udev_monitor *g_mon; #define DEV_BYID_PATH "/dev/disk/by-id/" /* 64MB is minimum usable disk for ZFS */ #define MINIMUM_SECTORS 131072 /* * Post disk event to SLM module * * occurs in the context of monitor thread */ static void zed_udev_event(const char *class, const char *subclass, nvlist_t *nvl) { char *strval; uint64_t numval; zed_log_msg(LOG_INFO, "zed_disk_event:"); zed_log_msg(LOG_INFO, "\tclass: %s", class); zed_log_msg(LOG_INFO, "\tsubclass: %s", subclass); if (nvlist_lookup_string(nvl, DEV_NAME, &strval) == 0) zed_log_msg(LOG_INFO, "\t%s: %s", DEV_NAME, strval); if (nvlist_lookup_string(nvl, DEV_PATH, &strval) == 0) zed_log_msg(LOG_INFO, "\t%s: %s", DEV_PATH, strval); if (nvlist_lookup_string(nvl, DEV_IDENTIFIER, &strval) == 0) zed_log_msg(LOG_INFO, "\t%s: %s", DEV_IDENTIFIER, strval); if (nvlist_lookup_string(nvl, DEV_PHYS_PATH, &strval) == 0) zed_log_msg(LOG_INFO, "\t%s: %s", DEV_PHYS_PATH, strval); if (nvlist_lookup_uint64(nvl, DEV_SIZE, &numval) == 0) zed_log_msg(LOG_INFO, "\t%s: %llu", DEV_SIZE, numval); if (nvlist_lookup_uint64(nvl, ZFS_EV_POOL_GUID, &numval) == 0) zed_log_msg(LOG_INFO, "\t%s: %llu", ZFS_EV_POOL_GUID, numval); if (nvlist_lookup_uint64(nvl, ZFS_EV_VDEV_GUID, &numval) == 0) zed_log_msg(LOG_INFO, "\t%s: %llu", ZFS_EV_VDEV_GUID, numval); (void) zfs_agent_post_event(class, subclass, nvl); } /* * dev_event_nvlist: place event schema into an nv pair list * * NAME VALUE (example) * -------------- -------------------------------------------------------- * DEV_NAME /dev/sdl * DEV_PATH /devices/pci0000:00/0000:00:03.0/0000:04:00.0/host0/... * DEV_IDENTIFIER ata-Hitachi_HTS725050A9A362_100601PCG420VLJ37DMC * DEV_PHYS_PATH pci-0000:04:00.0-sas-0x4433221101000000-lun-0 * DEV_IS_PART --- * DEV_SIZE 500107862016 * ZFS_EV_POOL_GUID 17523635698032189180 * ZFS_EV_VDEV_GUID 14663607734290803088 */ static nvlist_t * dev_event_nvlist(struct udev_device *dev) { nvlist_t *nvl; char strval[128]; const char *value, *path; uint64_t guid; if (nvlist_alloc(&nvl, NV_UNIQUE_NAME, 0) != 0) return (NULL); if (zfs_device_get_devid(dev, strval, sizeof (strval)) == 0) (void) nvlist_add_string(nvl, DEV_IDENTIFIER, strval); if (zfs_device_get_physical(dev, strval, sizeof (strval)) == 0) (void) nvlist_add_string(nvl, DEV_PHYS_PATH, strval); if ((path = udev_device_get_devnode(dev)) != NULL) (void) nvlist_add_string(nvl, DEV_NAME, path); if ((value = udev_device_get_devpath(dev)) != NULL) (void) nvlist_add_string(nvl, DEV_PATH, value); value = udev_device_get_devtype(dev); if ((value != NULL && strcmp("partition", value) == 0) || (udev_device_get_property_value(dev, "ID_PART_ENTRY_NUMBER") != NULL)) { (void) nvlist_add_boolean(nvl, DEV_IS_PART); } if ((value = udev_device_get_sysattr_value(dev, "size")) != NULL) { uint64_t numval = DEV_BSIZE; numval *= strtoull(value, NULL, 10); (void) nvlist_add_uint64(nvl, DEV_SIZE, numval); } /* * Grab the pool and vdev guids from blkid cache */ value = udev_device_get_property_value(dev, "ID_FS_UUID"); if (value != NULL && (guid = strtoull(value, NULL, 10)) != 0) (void) nvlist_add_uint64(nvl, ZFS_EV_POOL_GUID, guid); value = udev_device_get_property_value(dev, "ID_FS_UUID_SUB"); if (value != NULL && (guid = strtoull(value, NULL, 10)) != 0) (void) nvlist_add_uint64(nvl, ZFS_EV_VDEV_GUID, guid); /* * Either a vdev guid or a devid must be present for matching */ if (!nvlist_exists(nvl, DEV_IDENTIFIER) && !nvlist_exists(nvl, ZFS_EV_VDEV_GUID)) { nvlist_free(nvl); return (NULL); } return (nvl); } /* * Listen for block device uevents */ static void * zed_udev_monitor(void *arg) { struct udev_monitor *mon = arg; char *tmp, *tmp2; zed_log_msg(LOG_INFO, "Waiting for new uduev disk events..."); while (1) { struct udev_device *dev; const char *action, *type, *part, *sectors; const char *bus, *uuid; const char *class, *subclass; nvlist_t *nvl; boolean_t is_zfs = B_FALSE; /* allow a cancellation while blocked (recvmsg) */ pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL); /* blocks at recvmsg until an event occurs */ if ((dev = udev_monitor_receive_device(mon)) == NULL) { zed_log_msg(LOG_WARNING, "zed_udev_monitor: receive " "device error %d", errno); continue; } /* allow all steps to complete before a cancellation */ pthread_setcancelstate(PTHREAD_CANCEL_DISABLE, NULL); /* * Strongly typed device is the prefered filter */ type = udev_device_get_property_value(dev, "ID_FS_TYPE"); if (type != NULL && type[0] != '\0') { if (strcmp(type, "zfs_member") == 0) { is_zfs = B_TRUE; } else { /* not ours, so skip */ zed_log_msg(LOG_INFO, "zed_udev_monitor: skip " "%s (in use by %s)", udev_device_get_devnode(dev), type); udev_device_unref(dev); continue; } } /* * if this is a disk and it is partitioned, then the * zfs label will reside in a DEVTYPE=partition and * we can skip passing this event */ type = udev_device_get_property_value(dev, "DEVTYPE"); part = udev_device_get_property_value(dev, "ID_PART_TABLE_TYPE"); if (type != NULL && type[0] != '\0' && strcmp(type, "disk") == 0 && part != NULL && part[0] != '\0') { /* skip and wait for partition event */ udev_device_unref(dev); continue; } /* * ignore small partitions */ sectors = udev_device_get_property_value(dev, "ID_PART_ENTRY_SIZE"); if (sectors == NULL) sectors = udev_device_get_sysattr_value(dev, "size"); if (sectors != NULL && strtoull(sectors, NULL, 10) < MINIMUM_SECTORS) { udev_device_unref(dev); continue; } /* * If the blkid probe didn't find ZFS, then a persistent * device id string is required in the message schema * for matching with vdevs. Preflight here for expected * udev information. */ bus = udev_device_get_property_value(dev, "ID_BUS"); uuid = udev_device_get_property_value(dev, "DM_UUID"); if (!is_zfs && (bus == NULL && uuid == NULL)) { zed_log_msg(LOG_INFO, "zed_udev_monitor: %s no devid " "source", udev_device_get_devnode(dev)); udev_device_unref(dev); continue; } action = udev_device_get_action(dev); if (strcmp(action, "add") == 0) { class = EC_DEV_ADD; subclass = ESC_DISK; } else if (strcmp(action, "remove") == 0) { class = EC_DEV_REMOVE; subclass = ESC_DISK; } else if (strcmp(action, "change") == 0) { class = EC_DEV_STATUS; subclass = ESC_DEV_DLE; } else { zed_log_msg(LOG_WARNING, "zed_udev_monitor: %s unknown", action); udev_device_unref(dev); continue; } /* * Special case an EC_DEV_ADD for multipath devices * * When a multipath device is created, udev reports the * following: * * 1. "add" event of the dm device for the multipath device * (like /dev/dm-3). * 2. "change" event to create the actual multipath device * symlink (like /dev/mapper/mpatha). The event also * passes back the relevant DM vars we care about, like * DM_UUID. * 3. Another "change" event identical to #2 (that we ignore). * * To get the behavior we want, we treat the "change" event * in #2 as a "add" event; as if "/dev/mapper/mpatha" was * a new disk being added. */ if (strcmp(class, EC_DEV_STATUS) == 0 && udev_device_get_property_value(dev, "DM_UUID") && udev_device_get_property_value(dev, "MPATH_SBIN_PATH")) { tmp = (char *) udev_device_get_devnode(dev); tmp2 = zfs_get_underlying_path(tmp); if (tmp && tmp2 && (strcmp(tmp, tmp2) != 0)) { /* * We have a real underlying device, which * means that this multipath "change" event is * an "add" event. * * If the multipath device and the underlying * dev are the same name (i.e. /dev/dm-5), then * there is no real underlying disk for this * multipath device, and so this "change" event * really is a multipath removal. */ class = EC_DEV_ADD; subclass = ESC_DISK; } else { tmp = (char *) udev_device_get_property_value(dev, "DM_NR_VALID_PATHS"); /* treat as a multipath remove */ if (tmp != NULL && strcmp(tmp, "0") == 0) { class = EC_DEV_REMOVE; subclass = ESC_DISK; } } free(tmp2); } if ((nvl = dev_event_nvlist(dev)) != NULL) { zed_udev_event(class, subclass, nvl); nvlist_free(nvl); } udev_device_unref(dev); } return (NULL); } int zed_disk_event_init() { int fd, fflags; if ((g_udev = udev_new()) == NULL) { zed_log_msg(LOG_WARNING, "udev_new failed (%d)", errno); return (-1); } /* Set up a udev monitor for block devices */ g_mon = udev_monitor_new_from_netlink(g_udev, "udev"); udev_monitor_filter_add_match_subsystem_devtype(g_mon, "block", "disk"); udev_monitor_filter_add_match_subsystem_devtype(g_mon, "block", "partition"); udev_monitor_enable_receiving(g_mon); /* Make sure monitoring socket is blocking */ fd = udev_monitor_get_fd(g_mon); if ((fflags = fcntl(fd, F_GETFL)) & O_NONBLOCK) (void) fcntl(fd, F_SETFL, fflags & ~O_NONBLOCK); /* spawn a thread to monitor events */ if (pthread_create(&g_mon_tid, NULL, zed_udev_monitor, g_mon) != 0) { udev_monitor_unref(g_mon); udev_unref(g_udev); zed_log_msg(LOG_WARNING, "pthread_create failed"); return (-1); } zed_log_msg(LOG_INFO, "zed_disk_event_init"); return (0); } void zed_disk_event_fini() { /* cancel monitor thread at recvmsg() */ (void) pthread_cancel(g_mon_tid); (void) pthread_join(g_mon_tid, NULL); /* cleanup udev resources */ udev_monitor_unref(g_mon); udev_unref(g_udev); zed_log_msg(LOG_INFO, "zed_disk_event_fini"); } #else #include "zed_disk_event.h" int zed_disk_event_init() { return (0); } void zed_disk_event_fini() { } #endif /* HAVE_LIBUDEV */