/* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2012, 2020 by Delphix. All rights reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef HAVE_BLK_MQ #include #endif static void zvol_request_impl(zvol_state_t *zv, struct bio *bio, struct request *rq, boolean_t force_sync); static unsigned int zvol_major = ZVOL_MAJOR; static unsigned int zvol_request_sync = 0; static unsigned int zvol_prefetch_bytes = (128 * 1024); static unsigned long zvol_max_discard_blocks = 16384; /* * Switch taskq at multiple of 512 MB offset. This can be set to a lower value * to utilize more threads for small files but may affect prefetch hits. */ #define ZVOL_TASKQ_OFFSET_SHIFT 29 #ifndef HAVE_BLKDEV_GET_ERESTARTSYS static unsigned int zvol_open_timeout_ms = 1000; #endif static unsigned int zvol_threads = 0; #ifdef HAVE_BLK_MQ static unsigned int zvol_blk_mq_threads = 0; static unsigned int zvol_blk_mq_actual_threads; static boolean_t zvol_use_blk_mq = B_FALSE; /* * The maximum number of volblocksize blocks to process per thread. Typically, * write heavy workloads preform better with higher values here, and read * heavy workloads preform better with lower values, but that's not a hard * and fast rule. It's basically a knob to tune between "less overhead with * less parallelism" and "more overhead, but more parallelism". * * '8' was chosen as a reasonable, balanced, default based off of sequential * read and write tests to a zvol in an NVMe pool (with 16 CPUs). */ static unsigned int zvol_blk_mq_blocks_per_thread = 8; #endif static unsigned int zvol_num_taskqs = 0; #ifndef BLKDEV_DEFAULT_RQ /* BLKDEV_MAX_RQ was renamed to BLKDEV_DEFAULT_RQ in the 5.16 kernel */ #define BLKDEV_DEFAULT_RQ BLKDEV_MAX_RQ #endif /* * Finalize our BIO or request. */ #ifdef HAVE_BLK_MQ #define END_IO(zv, bio, rq, error) do { \ if (bio) { \ BIO_END_IO(bio, error); \ } else { \ blk_mq_end_request(rq, errno_to_bi_status(error)); \ } \ } while (0) #else #define END_IO(zv, bio, rq, error) BIO_END_IO(bio, error) #endif #ifdef HAVE_BLK_MQ static unsigned int zvol_blk_mq_queue_depth = BLKDEV_DEFAULT_RQ; static unsigned int zvol_actual_blk_mq_queue_depth; #endif struct zvol_state_os { struct gendisk *zvo_disk; /* generic disk */ struct request_queue *zvo_queue; /* request queue */ dev_t zvo_dev; /* device id */ #ifdef HAVE_BLK_MQ struct blk_mq_tag_set tag_set; #endif /* Set from the global 'zvol_use_blk_mq' at zvol load */ boolean_t use_blk_mq; }; typedef struct zv_taskq { uint_t tqs_cnt; taskq_t **tqs_taskq; } zv_taskq_t; static zv_taskq_t zvol_taskqs; static struct ida zvol_ida; typedef struct zv_request_stack { zvol_state_t *zv; struct bio *bio; struct request *rq; } zv_request_t; typedef struct zv_work { struct request *rq; struct work_struct work; } zv_work_t; typedef struct zv_request_task { zv_request_t zvr; taskq_ent_t ent; } zv_request_task_t; static zv_request_task_t * zv_request_task_create(zv_request_t zvr) { zv_request_task_t *task; task = kmem_alloc(sizeof (zv_request_task_t), KM_SLEEP); taskq_init_ent(&task->ent); task->zvr = zvr; return (task); } static void zv_request_task_free(zv_request_task_t *task) { kmem_free(task, sizeof (*task)); } #ifdef HAVE_BLK_MQ /* * This is called when a new block multiqueue request comes in. A request * contains one or more BIOs. */ static blk_status_t zvol_mq_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd) { struct request *rq = bd->rq; zvol_state_t *zv = rq->q->queuedata; /* Tell the kernel that we are starting to process this request */ blk_mq_start_request(rq); if (blk_rq_is_passthrough(rq)) { /* Skip non filesystem request */ blk_mq_end_request(rq, BLK_STS_IOERR); return (BLK_STS_IOERR); } zvol_request_impl(zv, NULL, rq, 0); /* Acknowledge to the kernel that we got this request */ return (BLK_STS_OK); } static struct blk_mq_ops zvol_blk_mq_queue_ops = { .queue_rq = zvol_mq_queue_rq, }; /* Initialize our blk-mq struct */ static int zvol_blk_mq_alloc_tag_set(zvol_state_t *zv) { struct zvol_state_os *zso = zv->zv_zso; memset(&zso->tag_set, 0, sizeof (zso->tag_set)); /* Initialize tag set. */ zso->tag_set.ops = &zvol_blk_mq_queue_ops; zso->tag_set.nr_hw_queues = zvol_blk_mq_actual_threads; zso->tag_set.queue_depth = zvol_actual_blk_mq_queue_depth; zso->tag_set.numa_node = NUMA_NO_NODE; zso->tag_set.cmd_size = 0; /* * We need BLK_MQ_F_BLOCKING here since we do blocking calls in * zvol_request_impl() */ zso->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_BLOCKING; zso->tag_set.driver_data = zv; return (blk_mq_alloc_tag_set(&zso->tag_set)); } #endif /* HAVE_BLK_MQ */ /* * Given a path, return TRUE if path is a ZVOL. */ boolean_t zvol_os_is_zvol(const char *path) { dev_t dev = 0; if (vdev_lookup_bdev(path, &dev) != 0) return (B_FALSE); if (MAJOR(dev) == zvol_major) return (B_TRUE); return (B_FALSE); } static void zvol_write(zv_request_t *zvr) { struct bio *bio = zvr->bio; struct request *rq = zvr->rq; int error = 0; zfs_uio_t uio; zvol_state_t *zv = zvr->zv; struct request_queue *q; struct gendisk *disk; unsigned long start_time = 0; boolean_t acct = B_FALSE; ASSERT3P(zv, !=, NULL); ASSERT3U(zv->zv_open_count, >, 0); ASSERT3P(zv->zv_zilog, !=, NULL); q = zv->zv_zso->zvo_queue; disk = zv->zv_zso->zvo_disk; /* bio marked as FLUSH need to flush before write */ if (io_is_flush(bio, rq)) zil_commit(zv->zv_zilog, ZVOL_OBJ); /* Some requests are just for flush and nothing else. */ if (io_size(bio, rq) == 0) { rw_exit(&zv->zv_suspend_lock); END_IO(zv, bio, rq, 0); return; } zfs_uio_bvec_init(&uio, bio, rq); ssize_t start_resid = uio.uio_resid; /* * With use_blk_mq, accounting is done by blk_mq_start_request() * and blk_mq_end_request(), so we can skip it here. */ if (bio) { acct = blk_queue_io_stat(q); if (acct) { start_time = blk_generic_start_io_acct(q, disk, WRITE, bio); } } boolean_t sync = io_is_fua(bio, rq) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS; zfs_locked_range_t *lr = zfs_rangelock_enter(&zv->zv_rangelock, uio.uio_loffset, uio.uio_resid, RL_WRITER); uint64_t volsize = zv->zv_volsize; while (uio.uio_resid > 0 && uio.uio_loffset < volsize) { uint64_t bytes = MIN(uio.uio_resid, DMU_MAX_ACCESS >> 1); uint64_t off = uio.uio_loffset; dmu_tx_t *tx = dmu_tx_create(zv->zv_objset); if (bytes > volsize - off) /* don't write past the end */ bytes = volsize - off; dmu_tx_hold_write_by_dnode(tx, zv->zv_dn, off, bytes); /* This will only fail for ENOSPC */ error = dmu_tx_assign(tx, TXG_WAIT); if (error) { dmu_tx_abort(tx); break; } error = dmu_write_uio_dnode(zv->zv_dn, &uio, bytes, tx); if (error == 0) { zvol_log_write(zv, tx, off, bytes, sync); } dmu_tx_commit(tx); if (error) break; } zfs_rangelock_exit(lr); int64_t nwritten = start_resid - uio.uio_resid; dataset_kstats_update_write_kstats(&zv->zv_kstat, nwritten); task_io_account_write(nwritten); if (sync) zil_commit(zv->zv_zilog, ZVOL_OBJ); rw_exit(&zv->zv_suspend_lock); if (bio && acct) { blk_generic_end_io_acct(q, disk, WRITE, bio, start_time); } END_IO(zv, bio, rq, -error); } static void zvol_write_task(void *arg) { zv_request_task_t *task = arg; zvol_write(&task->zvr); zv_request_task_free(task); } static void zvol_discard(zv_request_t *zvr) { struct bio *bio = zvr->bio; struct request *rq = zvr->rq; zvol_state_t *zv = zvr->zv; uint64_t start = io_offset(bio, rq); uint64_t size = io_size(bio, rq); uint64_t end = start + size; boolean_t sync; int error = 0; dmu_tx_t *tx; struct request_queue *q = zv->zv_zso->zvo_queue; struct gendisk *disk = zv->zv_zso->zvo_disk; unsigned long start_time = 0; boolean_t acct = B_FALSE; ASSERT3P(zv, !=, NULL); ASSERT3U(zv->zv_open_count, >, 0); ASSERT3P(zv->zv_zilog, !=, NULL); if (bio) { acct = blk_queue_io_stat(q); if (acct) { start_time = blk_generic_start_io_acct(q, disk, WRITE, bio); } } sync = io_is_fua(bio, rq) || zv->zv_objset->os_sync == ZFS_SYNC_ALWAYS; if (end > zv->zv_volsize) { error = SET_ERROR(EIO); goto unlock; } /* * Align the request to volume block boundaries when a secure erase is * not required. This will prevent dnode_free_range() from zeroing out * the unaligned parts which is slow (read-modify-write) and useless * since we are not freeing any space by doing so. */ if (!io_is_secure_erase(bio, rq)) { start = P2ROUNDUP(start, zv->zv_volblocksize); end = P2ALIGN_TYPED(end, zv->zv_volblocksize, uint64_t); size = end - start; } if (start >= end) goto unlock; zfs_locked_range_t *lr = zfs_rangelock_enter(&zv->zv_rangelock, start, size, RL_WRITER); tx = dmu_tx_create(zv->zv_objset); dmu_tx_mark_netfree(tx); error = dmu_tx_assign(tx, TXG_WAIT); if (error != 0) { dmu_tx_abort(tx); } else { zvol_log_truncate(zv, tx, start, size); dmu_tx_commit(tx); error = dmu_free_long_range(zv->zv_objset, ZVOL_OBJ, start, size); } zfs_rangelock_exit(lr); if (error == 0 && sync) zil_commit(zv->zv_zilog, ZVOL_OBJ); unlock: rw_exit(&zv->zv_suspend_lock); if (bio && acct) { blk_generic_end_io_acct(q, disk, WRITE, bio, start_time); } END_IO(zv, bio, rq, -error); } static void zvol_discard_task(void *arg) { zv_request_task_t *task = arg; zvol_discard(&task->zvr); zv_request_task_free(task); } static void zvol_read(zv_request_t *zvr) { struct bio *bio = zvr->bio; struct request *rq = zvr->rq; int error = 0; zfs_uio_t uio; boolean_t acct = B_FALSE; zvol_state_t *zv = zvr->zv; struct request_queue *q; struct gendisk *disk; unsigned long start_time = 0; ASSERT3P(zv, !=, NULL); ASSERT3U(zv->zv_open_count, >, 0); zfs_uio_bvec_init(&uio, bio, rq); q = zv->zv_zso->zvo_queue; disk = zv->zv_zso->zvo_disk; ssize_t start_resid = uio.uio_resid; /* * When blk-mq is being used, accounting is done by * blk_mq_start_request() and blk_mq_end_request(). */ if (bio) { acct = blk_queue_io_stat(q); if (acct) start_time = blk_generic_start_io_acct(q, disk, READ, bio); } zfs_locked_range_t *lr = zfs_rangelock_enter(&zv->zv_rangelock, uio.uio_loffset, uio.uio_resid, RL_READER); uint64_t volsize = zv->zv_volsize; while (uio.uio_resid > 0 && uio.uio_loffset < volsize) { uint64_t bytes = MIN(uio.uio_resid, DMU_MAX_ACCESS >> 1); /* don't read past the end */ if (bytes > volsize - uio.uio_loffset) bytes = volsize - uio.uio_loffset; error = dmu_read_uio_dnode(zv->zv_dn, &uio, bytes); if (error) { /* convert checksum errors into IO errors */ if (error == ECKSUM) error = SET_ERROR(EIO); break; } } zfs_rangelock_exit(lr); int64_t nread = start_resid - uio.uio_resid; dataset_kstats_update_read_kstats(&zv->zv_kstat, nread); task_io_account_read(nread); rw_exit(&zv->zv_suspend_lock); if (bio && acct) { blk_generic_end_io_acct(q, disk, READ, bio, start_time); } END_IO(zv, bio, rq, -error); } static void zvol_read_task(void *arg) { zv_request_task_t *task = arg; zvol_read(&task->zvr); zv_request_task_free(task); } /* * Process a BIO or request * * Either 'bio' or 'rq' should be set depending on if we are processing a * bio or a request (both should not be set). * * force_sync: Set to 0 to defer processing to a background taskq * Set to 1 to process data synchronously */ static void zvol_request_impl(zvol_state_t *zv, struct bio *bio, struct request *rq, boolean_t force_sync) { fstrans_cookie_t cookie = spl_fstrans_mark(); uint64_t offset = io_offset(bio, rq); uint64_t size = io_size(bio, rq); int rw = io_data_dir(bio, rq); if (zvol_request_sync || zv->zv_threading == B_FALSE) force_sync = 1; zv_request_t zvr = { .zv = zv, .bio = bio, .rq = rq, }; if (io_has_data(bio, rq) && offset + size > zv->zv_volsize) { printk(KERN_INFO "%s: bad access: offset=%llu, size=%lu\n", zv->zv_zso->zvo_disk->disk_name, (long long unsigned)offset, (long unsigned)size); END_IO(zv, bio, rq, -SET_ERROR(EIO)); goto out; } zv_request_task_t *task; zv_taskq_t *ztqs = &zvol_taskqs; uint_t blk_mq_hw_queue = 0; uint_t tq_idx; uint_t taskq_hash; #ifdef HAVE_BLK_MQ if (rq) #ifdef HAVE_BLK_MQ_RQ_HCTX blk_mq_hw_queue = rq->mq_hctx->queue_num; #else blk_mq_hw_queue = rq->q->queue_hw_ctx[rq->q->mq_map[rq->cpu]]->queue_num; #endif #endif taskq_hash = cityhash4((uintptr_t)zv, offset >> ZVOL_TASKQ_OFFSET_SHIFT, blk_mq_hw_queue, 0); tq_idx = taskq_hash % ztqs->tqs_cnt; if (rw == WRITE) { if (unlikely(zv->zv_flags & ZVOL_RDONLY)) { END_IO(zv, bio, rq, -SET_ERROR(EROFS)); goto out; } /* * Prevents the zvol from being suspended, or the ZIL being * concurrently opened. Will be released after the i/o * completes. */ rw_enter(&zv->zv_suspend_lock, RW_READER); /* * Open a ZIL if this is the first time we have written to this * zvol. We protect zv->zv_zilog with zv_suspend_lock rather * than zv_state_lock so that we don't need to acquire an * additional lock in this path. */ if (zv->zv_zilog == NULL) { rw_exit(&zv->zv_suspend_lock); rw_enter(&zv->zv_suspend_lock, RW_WRITER); if (zv->zv_zilog == NULL) { zv->zv_zilog = zil_open(zv->zv_objset, zvol_get_data, &zv->zv_kstat.dk_zil_sums); zv->zv_flags |= ZVOL_WRITTEN_TO; /* replay / destroy done in zvol_create_minor */ VERIFY0((zv->zv_zilog->zl_header->zh_flags & ZIL_REPLAY_NEEDED)); } rw_downgrade(&zv->zv_suspend_lock); } /* * We don't want this thread to be blocked waiting for i/o to * complete, so we instead wait from a taskq callback. The * i/o may be a ZIL write (via zil_commit()), or a read of an * indirect block, or a read of a data block (if this is a * partial-block write). We will indicate that the i/o is * complete by calling END_IO() from the taskq callback. * * This design allows the calling thread to continue and * initiate more concurrent operations by calling * zvol_request() again. There are typically only a small * number of threads available to call zvol_request() (e.g. * one per iSCSI target), so keeping the latency of * zvol_request() low is important for performance. * * The zvol_request_sync module parameter allows this * behavior to be altered, for performance evaluation * purposes. If the callback blocks, setting * zvol_request_sync=1 will result in much worse performance. * * We can have up to zvol_threads concurrent i/o's being * processed for all zvols on the system. This is typically * a vast improvement over the zvol_request_sync=1 behavior * of one i/o at a time per zvol. However, an even better * design would be for zvol_request() to initiate the zio * directly, and then be notified by the zio_done callback, * which would call END_IO(). Unfortunately, the DMU/ZIL * interfaces lack this functionality (they block waiting for * the i/o to complete). */ if (io_is_discard(bio, rq) || io_is_secure_erase(bio, rq)) { if (force_sync) { zvol_discard(&zvr); } else { task = zv_request_task_create(zvr); taskq_dispatch_ent(ztqs->tqs_taskq[tq_idx], zvol_discard_task, task, 0, &task->ent); } } else { if (force_sync) { zvol_write(&zvr); } else { task = zv_request_task_create(zvr); taskq_dispatch_ent(ztqs->tqs_taskq[tq_idx], zvol_write_task, task, 0, &task->ent); } } } else { /* * The SCST driver, and possibly others, may issue READ I/Os * with a length of zero bytes. These empty I/Os contain no * data and require no additional handling. */ if (size == 0) { END_IO(zv, bio, rq, 0); goto out; } rw_enter(&zv->zv_suspend_lock, RW_READER); /* See comment in WRITE case above. */ if (force_sync) { zvol_read(&zvr); } else { task = zv_request_task_create(zvr); taskq_dispatch_ent(ztqs->tqs_taskq[tq_idx], zvol_read_task, task, 0, &task->ent); } } out: spl_fstrans_unmark(cookie); } #ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS #ifdef HAVE_BDEV_SUBMIT_BIO_RETURNS_VOID static void zvol_submit_bio(struct bio *bio) #else static blk_qc_t zvol_submit_bio(struct bio *bio) #endif #else static MAKE_REQUEST_FN_RET zvol_request(struct request_queue *q, struct bio *bio) #endif { #ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS #if defined(HAVE_BIO_BDEV_DISK) struct request_queue *q = bio->bi_bdev->bd_disk->queue; #else struct request_queue *q = bio->bi_disk->queue; #endif #endif zvol_state_t *zv = q->queuedata; zvol_request_impl(zv, bio, NULL, 0); #if defined(HAVE_MAKE_REQUEST_FN_RET_QC) || \ defined(HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS) && \ !defined(HAVE_BDEV_SUBMIT_BIO_RETURNS_VOID) return (BLK_QC_T_NONE); #endif } static int #ifdef HAVE_BLK_MODE_T zvol_open(struct gendisk *disk, blk_mode_t flag) #else zvol_open(struct block_device *bdev, fmode_t flag) #endif { zvol_state_t *zv; int error = 0; boolean_t drop_suspend = B_FALSE; #ifndef HAVE_BLKDEV_GET_ERESTARTSYS hrtime_t timeout = MSEC2NSEC(zvol_open_timeout_ms); hrtime_t start = gethrtime(); retry: #endif rw_enter(&zvol_state_lock, RW_READER); /* * Obtain a copy of private_data under the zvol_state_lock to make * sure that either the result of zvol free code path setting * disk->private_data to NULL is observed, or zvol_os_free() * is not called on this zv because of the positive zv_open_count. */ #ifdef HAVE_BLK_MODE_T zv = disk->private_data; #else zv = bdev->bd_disk->private_data; #endif if (zv == NULL) { rw_exit(&zvol_state_lock); return (SET_ERROR(-ENXIO)); } mutex_enter(&zv->zv_state_lock); /* * Make sure zvol is not suspended during first open * (hold zv_suspend_lock) and respect proper lock acquisition * ordering - zv_suspend_lock before zv_state_lock */ if (zv->zv_open_count == 0) { if (!rw_tryenter(&zv->zv_suspend_lock, RW_READER)) { mutex_exit(&zv->zv_state_lock); rw_enter(&zv->zv_suspend_lock, RW_READER); mutex_enter(&zv->zv_state_lock); /* check to see if zv_suspend_lock is needed */ if (zv->zv_open_count != 0) { rw_exit(&zv->zv_suspend_lock); } else { drop_suspend = B_TRUE; } } else { drop_suspend = B_TRUE; } } rw_exit(&zvol_state_lock); ASSERT(MUTEX_HELD(&zv->zv_state_lock)); if (zv->zv_open_count == 0) { boolean_t drop_namespace = B_FALSE; ASSERT(RW_READ_HELD(&zv->zv_suspend_lock)); /* * In all other call paths the spa_namespace_lock is taken * before the bdev->bd_mutex lock. However, on open(2) * the __blkdev_get() function calls fops->open() with the * bdev->bd_mutex lock held. This can result in a deadlock * when zvols from one pool are used as vdevs in another. * * To prevent a lock inversion deadlock we preemptively * take the spa_namespace_lock. Normally the lock will not * be contended and this is safe because spa_open_common() * handles the case where the caller already holds the * spa_namespace_lock. * * When the lock cannot be aquired after multiple retries * this must be the vdev on zvol deadlock case and we have * no choice but to return an error. For 5.12 and older * kernels returning -ERESTARTSYS will result in the * bdev->bd_mutex being dropped, then reacquired, and * fops->open() being called again. This process can be * repeated safely until both locks are acquired. For 5.13 * and newer the -ERESTARTSYS retry logic was removed from * the kernel so the only option is to return the error for * the caller to handle it. */ if (!mutex_owned(&spa_namespace_lock)) { if (!mutex_tryenter(&spa_namespace_lock)) { mutex_exit(&zv->zv_state_lock); rw_exit(&zv->zv_suspend_lock); #ifdef HAVE_BLKDEV_GET_ERESTARTSYS schedule(); return (SET_ERROR(-ERESTARTSYS)); #else if ((gethrtime() - start) > timeout) return (SET_ERROR(-ERESTARTSYS)); schedule_timeout_interruptible( MSEC_TO_TICK(10)); goto retry; #endif } else { drop_namespace = B_TRUE; } } error = -zvol_first_open(zv, !(blk_mode_is_open_write(flag))); if (drop_namespace) mutex_exit(&spa_namespace_lock); } if (error == 0) { if ((blk_mode_is_open_write(flag)) && (zv->zv_flags & ZVOL_RDONLY)) { if (zv->zv_open_count == 0) zvol_last_close(zv); error = SET_ERROR(-EROFS); } else { zv->zv_open_count++; } } mutex_exit(&zv->zv_state_lock); if (drop_suspend) rw_exit(&zv->zv_suspend_lock); if (error == 0) #ifdef HAVE_BLK_MODE_T disk_check_media_change(disk); #else zfs_check_media_change(bdev); #endif return (error); } static void #ifdef HAVE_BLOCK_DEVICE_OPERATIONS_RELEASE_1ARG zvol_release(struct gendisk *disk) #else zvol_release(struct gendisk *disk, fmode_t unused) #endif { #if !defined(HAVE_BLOCK_DEVICE_OPERATIONS_RELEASE_1ARG) (void) unused; #endif zvol_state_t *zv; boolean_t drop_suspend = B_TRUE; rw_enter(&zvol_state_lock, RW_READER); zv = disk->private_data; mutex_enter(&zv->zv_state_lock); ASSERT3U(zv->zv_open_count, >, 0); /* * make sure zvol is not suspended during last close * (hold zv_suspend_lock) and respect proper lock acquisition * ordering - zv_suspend_lock before zv_state_lock */ if (zv->zv_open_count == 1) { if (!rw_tryenter(&zv->zv_suspend_lock, RW_READER)) { mutex_exit(&zv->zv_state_lock); rw_enter(&zv->zv_suspend_lock, RW_READER); mutex_enter(&zv->zv_state_lock); /* check to see if zv_suspend_lock is needed */ if (zv->zv_open_count != 1) { rw_exit(&zv->zv_suspend_lock); drop_suspend = B_FALSE; } } } else { drop_suspend = B_FALSE; } rw_exit(&zvol_state_lock); ASSERT(MUTEX_HELD(&zv->zv_state_lock)); zv->zv_open_count--; if (zv->zv_open_count == 0) { ASSERT(RW_READ_HELD(&zv->zv_suspend_lock)); zvol_last_close(zv); } mutex_exit(&zv->zv_state_lock); if (drop_suspend) rw_exit(&zv->zv_suspend_lock); } static int zvol_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg) { zvol_state_t *zv = bdev->bd_disk->private_data; int error = 0; ASSERT3U(zv->zv_open_count, >, 0); switch (cmd) { case BLKFLSBUF: #ifdef HAVE_FSYNC_BDEV fsync_bdev(bdev); #elif defined(HAVE_SYNC_BLOCKDEV) sync_blockdev(bdev); #else #error "Neither fsync_bdev() nor sync_blockdev() found" #endif invalidate_bdev(bdev); rw_enter(&zv->zv_suspend_lock, RW_READER); if (!(zv->zv_flags & ZVOL_RDONLY)) txg_wait_synced(dmu_objset_pool(zv->zv_objset), 0); rw_exit(&zv->zv_suspend_lock); break; case BLKZNAME: mutex_enter(&zv->zv_state_lock); error = copy_to_user((void *)arg, zv->zv_name, MAXNAMELEN); mutex_exit(&zv->zv_state_lock); break; default: error = -ENOTTY; break; } return (SET_ERROR(error)); } #ifdef CONFIG_COMPAT static int zvol_compat_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, unsigned long arg) { return (zvol_ioctl(bdev, mode, cmd, arg)); } #else #define zvol_compat_ioctl NULL #endif static unsigned int zvol_check_events(struct gendisk *disk, unsigned int clearing) { unsigned int mask = 0; rw_enter(&zvol_state_lock, RW_READER); zvol_state_t *zv = disk->private_data; if (zv != NULL) { mutex_enter(&zv->zv_state_lock); mask = zv->zv_changed ? DISK_EVENT_MEDIA_CHANGE : 0; zv->zv_changed = 0; mutex_exit(&zv->zv_state_lock); } rw_exit(&zvol_state_lock); return (mask); } static int zvol_revalidate_disk(struct gendisk *disk) { rw_enter(&zvol_state_lock, RW_READER); zvol_state_t *zv = disk->private_data; if (zv != NULL) { mutex_enter(&zv->zv_state_lock); set_capacity(zv->zv_zso->zvo_disk, zv->zv_volsize >> SECTOR_BITS); mutex_exit(&zv->zv_state_lock); } rw_exit(&zvol_state_lock); return (0); } int zvol_os_update_volsize(zvol_state_t *zv, uint64_t volsize) { struct gendisk *disk = zv->zv_zso->zvo_disk; #if defined(HAVE_REVALIDATE_DISK_SIZE) revalidate_disk_size(disk, zvol_revalidate_disk(disk) == 0); #elif defined(HAVE_REVALIDATE_DISK) revalidate_disk(disk); #else zvol_revalidate_disk(disk); #endif return (0); } void zvol_os_clear_private(zvol_state_t *zv) { /* * Cleared while holding zvol_state_lock as a writer * which will prevent zvol_open() from opening it. */ zv->zv_zso->zvo_disk->private_data = NULL; } /* * Provide a simple virtual geometry for legacy compatibility. For devices * smaller than 1 MiB a small head and sector count is used to allow very * tiny devices. For devices over 1 Mib a standard head and sector count * is used to keep the cylinders count reasonable. */ static int zvol_getgeo(struct block_device *bdev, struct hd_geometry *geo) { zvol_state_t *zv = bdev->bd_disk->private_data; sector_t sectors; ASSERT3U(zv->zv_open_count, >, 0); sectors = get_capacity(zv->zv_zso->zvo_disk); if (sectors > 2048) { geo->heads = 16; geo->sectors = 63; } else { geo->heads = 2; geo->sectors = 4; } geo->start = 0; geo->cylinders = sectors / (geo->heads * geo->sectors); return (0); } /* * Why have two separate block_device_operations structs? * * Normally we'd just have one, and assign 'submit_bio' as needed. However, * it's possible the user's kernel is built with CONSTIFY_PLUGIN, meaning we * can't just change submit_bio dynamically at runtime. So just create two * separate structs to get around this. */ static const struct block_device_operations zvol_ops_blk_mq = { .open = zvol_open, .release = zvol_release, .ioctl = zvol_ioctl, .compat_ioctl = zvol_compat_ioctl, .check_events = zvol_check_events, #ifdef HAVE_BLOCK_DEVICE_OPERATIONS_REVALIDATE_DISK .revalidate_disk = zvol_revalidate_disk, #endif .getgeo = zvol_getgeo, .owner = THIS_MODULE, }; static const struct block_device_operations zvol_ops = { .open = zvol_open, .release = zvol_release, .ioctl = zvol_ioctl, .compat_ioctl = zvol_compat_ioctl, .check_events = zvol_check_events, #ifdef HAVE_BLOCK_DEVICE_OPERATIONS_REVALIDATE_DISK .revalidate_disk = zvol_revalidate_disk, #endif .getgeo = zvol_getgeo, .owner = THIS_MODULE, #ifdef HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS .submit_bio = zvol_submit_bio, #endif }; static int zvol_alloc_non_blk_mq(struct zvol_state_os *zso) { #if defined(HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS) #if defined(HAVE_BLK_ALLOC_DISK) zso->zvo_disk = blk_alloc_disk(NUMA_NO_NODE); if (zso->zvo_disk == NULL) return (1); zso->zvo_disk->minors = ZVOL_MINORS; zso->zvo_queue = zso->zvo_disk->queue; #elif defined(HAVE_BLK_ALLOC_DISK_2ARG) struct gendisk *disk = blk_alloc_disk(NULL, NUMA_NO_NODE); if (IS_ERR(disk)) { zso->zvo_disk = NULL; return (1); } zso->zvo_disk = disk; zso->zvo_disk->minors = ZVOL_MINORS; zso->zvo_queue = zso->zvo_disk->queue; #else zso->zvo_queue = blk_alloc_queue(NUMA_NO_NODE); if (zso->zvo_queue == NULL) return (1); zso->zvo_disk = alloc_disk(ZVOL_MINORS); if (zso->zvo_disk == NULL) { blk_cleanup_queue(zso->zvo_queue); return (1); } zso->zvo_disk->queue = zso->zvo_queue; #endif /* HAVE_BLK_ALLOC_DISK */ #else zso->zvo_queue = blk_generic_alloc_queue(zvol_request, NUMA_NO_NODE); if (zso->zvo_queue == NULL) return (1); zso->zvo_disk = alloc_disk(ZVOL_MINORS); if (zso->zvo_disk == NULL) { blk_cleanup_queue(zso->zvo_queue); return (1); } zso->zvo_disk->queue = zso->zvo_queue; #endif /* HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS */ return (0); } static int zvol_alloc_blk_mq(zvol_state_t *zv) { #ifdef HAVE_BLK_MQ struct zvol_state_os *zso = zv->zv_zso; /* Allocate our blk-mq tag_set */ if (zvol_blk_mq_alloc_tag_set(zv) != 0) return (1); #if defined(HAVE_BLK_ALLOC_DISK) zso->zvo_disk = blk_mq_alloc_disk(&zso->tag_set, zv); if (zso->zvo_disk == NULL) { blk_mq_free_tag_set(&zso->tag_set); return (1); } zso->zvo_queue = zso->zvo_disk->queue; zso->zvo_disk->minors = ZVOL_MINORS; #elif defined(HAVE_BLK_ALLOC_DISK_2ARG) struct gendisk *disk = blk_mq_alloc_disk(&zso->tag_set, NULL, zv); if (IS_ERR(disk)) { zso->zvo_disk = NULL; blk_mq_free_tag_set(&zso->tag_set); return (1); } zso->zvo_disk = disk; zso->zvo_queue = zso->zvo_disk->queue; zso->zvo_disk->minors = ZVOL_MINORS; #else zso->zvo_disk = alloc_disk(ZVOL_MINORS); if (zso->zvo_disk == NULL) { blk_cleanup_queue(zso->zvo_queue); blk_mq_free_tag_set(&zso->tag_set); return (1); } /* Allocate queue */ zso->zvo_queue = blk_mq_init_queue(&zso->tag_set); if (IS_ERR(zso->zvo_queue)) { blk_mq_free_tag_set(&zso->tag_set); return (1); } /* Our queue is now created, assign it to our disk */ zso->zvo_disk->queue = zso->zvo_queue; #endif #endif return (0); } /* * Allocate memory for a new zvol_state_t and setup the required * request queue and generic disk structures for the block device. */ static zvol_state_t * zvol_alloc(dev_t dev, const char *name) { zvol_state_t *zv; struct zvol_state_os *zso; uint64_t volmode; int ret; if (dsl_prop_get_integer(name, "volmode", &volmode, NULL) != 0) return (NULL); if (volmode == ZFS_VOLMODE_DEFAULT) volmode = zvol_volmode; if (volmode == ZFS_VOLMODE_NONE) return (NULL); zv = kmem_zalloc(sizeof (zvol_state_t), KM_SLEEP); zso = kmem_zalloc(sizeof (struct zvol_state_os), KM_SLEEP); zv->zv_zso = zso; zv->zv_volmode = volmode; list_link_init(&zv->zv_next); mutex_init(&zv->zv_state_lock, NULL, MUTEX_DEFAULT, NULL); #ifdef HAVE_BLK_MQ zv->zv_zso->use_blk_mq = zvol_use_blk_mq; #endif /* * The block layer has 3 interfaces for getting BIOs: * * 1. blk-mq request queues (new) * 2. submit_bio() (oldest) * 3. regular request queues (old). * * Each of those interfaces has two permutations: * * a) We have blk_alloc_disk()/blk_mq_alloc_disk(), which allocates * both the disk and its queue (5.14 kernel or newer) * * b) We don't have blk_*alloc_disk(), and have to allocate the * disk and the queue separately. (5.13 kernel or older) */ if (zv->zv_zso->use_blk_mq) { ret = zvol_alloc_blk_mq(zv); zso->zvo_disk->fops = &zvol_ops_blk_mq; } else { ret = zvol_alloc_non_blk_mq(zso); zso->zvo_disk->fops = &zvol_ops; } if (ret != 0) goto out_kmem; blk_queue_set_write_cache(zso->zvo_queue, B_TRUE, B_TRUE); /* Limit read-ahead to a single page to prevent over-prefetching. */ blk_queue_set_read_ahead(zso->zvo_queue, 1); if (!zv->zv_zso->use_blk_mq) { /* Disable write merging in favor of the ZIO pipeline. */ blk_queue_flag_set(QUEUE_FLAG_NOMERGES, zso->zvo_queue); } /* Enable /proc/diskstats */ blk_queue_flag_set(QUEUE_FLAG_IO_STAT, zso->zvo_queue); zso->zvo_queue->queuedata = zv; zso->zvo_dev = dev; zv->zv_open_count = 0; strlcpy(zv->zv_name, name, sizeof (zv->zv_name)); zfs_rangelock_init(&zv->zv_rangelock, NULL, NULL); rw_init(&zv->zv_suspend_lock, NULL, RW_DEFAULT, NULL); zso->zvo_disk->major = zvol_major; zso->zvo_disk->events = DISK_EVENT_MEDIA_CHANGE; /* * Setting ZFS_VOLMODE_DEV disables partitioning on ZVOL devices. * This is accomplished by limiting the number of minors for the * device to one and explicitly disabling partition scanning. */ if (volmode == ZFS_VOLMODE_DEV) { zso->zvo_disk->minors = 1; zso->zvo_disk->flags &= ~ZFS_GENHD_FL_EXT_DEVT; zso->zvo_disk->flags |= ZFS_GENHD_FL_NO_PART; } zso->zvo_disk->first_minor = (dev & MINORMASK); zso->zvo_disk->private_data = zv; snprintf(zso->zvo_disk->disk_name, DISK_NAME_LEN, "%s%d", ZVOL_DEV_NAME, (dev & MINORMASK)); return (zv); out_kmem: kmem_free(zso, sizeof (struct zvol_state_os)); kmem_free(zv, sizeof (zvol_state_t)); return (NULL); } /* * Cleanup then free a zvol_state_t which was created by zvol_alloc(). * At this time, the structure is not opened by anyone, is taken off * the zvol_state_list, and has its private data set to NULL. * The zvol_state_lock is dropped. * * This function may take many milliseconds to complete (e.g. we've seen * it take over 256ms), due to the calls to "blk_cleanup_queue" and * "del_gendisk". Thus, consumers need to be careful to account for this * latency when calling this function. */ void zvol_os_free(zvol_state_t *zv) { ASSERT(!RW_LOCK_HELD(&zv->zv_suspend_lock)); ASSERT(!MUTEX_HELD(&zv->zv_state_lock)); ASSERT0(zv->zv_open_count); ASSERT3P(zv->zv_zso->zvo_disk->private_data, ==, NULL); rw_destroy(&zv->zv_suspend_lock); zfs_rangelock_fini(&zv->zv_rangelock); del_gendisk(zv->zv_zso->zvo_disk); #if defined(HAVE_SUBMIT_BIO_IN_BLOCK_DEVICE_OPERATIONS) && \ (defined(HAVE_BLK_ALLOC_DISK) || defined(HAVE_BLK_ALLOC_DISK_2ARG)) #if defined(HAVE_BLK_CLEANUP_DISK) blk_cleanup_disk(zv->zv_zso->zvo_disk); #else put_disk(zv->zv_zso->zvo_disk); #endif #else blk_cleanup_queue(zv->zv_zso->zvo_queue); put_disk(zv->zv_zso->zvo_disk); #endif #ifdef HAVE_BLK_MQ if (zv->zv_zso->use_blk_mq) blk_mq_free_tag_set(&zv->zv_zso->tag_set); #endif ida_simple_remove(&zvol_ida, MINOR(zv->zv_zso->zvo_dev) >> ZVOL_MINOR_BITS); mutex_destroy(&zv->zv_state_lock); dataset_kstats_destroy(&zv->zv_kstat); kmem_free(zv->zv_zso, sizeof (struct zvol_state_os)); kmem_free(zv, sizeof (zvol_state_t)); } void zvol_wait_close(zvol_state_t *zv) { } struct add_disk_work { struct delayed_work work; struct gendisk *disk; int error; }; static int __zvol_os_add_disk(struct gendisk *disk) { int error = 0; #ifdef HAVE_ADD_DISK_RET error = add_disk(disk); #else add_disk(disk); #endif return (error); } #if defined(HAVE_BDEV_FILE_OPEN_BY_PATH) static void zvol_os_add_disk_work(struct work_struct *work) { struct add_disk_work *add_disk_work; add_disk_work = container_of(work, struct add_disk_work, work.work); add_disk_work->error = __zvol_os_add_disk(add_disk_work->disk); } #endif /* * SPECIAL CASE: * * This function basically calls add_disk() from a workqueue. You may be * thinking: why not just call add_disk() directly? * * When you call add_disk(), the zvol appears to the world. When this happens, * the kernel calls disk_scan_partitions() on the zvol, which behaves * differently on the 6.9+ kernels: * * - 6.8 and older kernels - * disk_scan_partitions() * handle = bdev_open_by_dev( * zvol_open() * bdev_release(handle); * zvol_release() * * * - 6.9+ kernels - * disk_scan_partitions() * file = bdev_file_open_by_dev() * zvol_open() * fput(file) * < wait for return to userspace > * zvol_release() * * The difference is that the bdev_release() from the 6.8 kernel is synchronous * while the fput() from the 6.9 kernel is async. Or more specifically it's * async that has to wait until we return to userspace (since it adds the fput * into the caller's work queue with the TWA_RESUME flag set). This is not the * behavior we want, since we want do things like create+destroy a zvol within * a single ZFS_IOC_CREATE ioctl, and the "create" part needs to release the * reference to the zvol while we're in the IOCTL, which can't wait until we * return to userspace. * * We can get around this since fput() has a special codepath for when it's * running in a kernel thread or interrupt. In those cases, it just puts the * fput into the system workqueue, which we can force to run with * __flush_workqueue(). That is why we call add_disk() from a workqueue - so it * run from a kernel thread and "tricks" the fput() codepaths. * * Note that __flush_workqueue() is slowly getting deprecated. This may be ok * though, since our IOCTL will spin on EBUSY waiting for the zvol release (via * fput) to happen, which it eventually, naturally, will from the system_wq * without us explicitly calling __flush_workqueue(). */ static int zvol_os_add_disk(struct gendisk *disk) { #if defined(HAVE_BDEV_FILE_OPEN_BY_PATH) /* 6.9+ kernel */ struct add_disk_work add_disk_work; INIT_DELAYED_WORK(&add_disk_work.work, zvol_os_add_disk_work); add_disk_work.disk = disk; add_disk_work.error = 0; /* Use *_delayed_work functions since they're not GPL'd */ schedule_delayed_work(&add_disk_work.work, 0); flush_delayed_work(&add_disk_work.work); __flush_workqueue(system_wq); return (add_disk_work.error); #else /* <= 6.8 kernel */ return (__zvol_os_add_disk(disk)); #endif } /* * Create a block device minor node and setup the linkage between it * and the specified volume. Once this function returns the block * device is live and ready for use. */ int zvol_os_create_minor(const char *name) { zvol_state_t *zv; objset_t *os; dmu_object_info_t *doi; uint64_t volsize; uint64_t len; unsigned minor = 0; int error = 0; int idx; uint64_t hash = zvol_name_hash(name); uint64_t volthreading; bool replayed_zil = B_FALSE; if (zvol_inhibit_dev) return (0); idx = ida_simple_get(&zvol_ida, 0, 0, kmem_flags_convert(KM_SLEEP)); if (idx < 0) return (SET_ERROR(-idx)); minor = idx << ZVOL_MINOR_BITS; if (MINOR(minor) != minor) { /* too many partitions can cause an overflow */ zfs_dbgmsg("zvol: create minor overflow: %s, minor %u/%u", name, minor, MINOR(minor)); ida_simple_remove(&zvol_ida, idx); return (SET_ERROR(EINVAL)); } zv = zvol_find_by_name_hash(name, hash, RW_NONE); if (zv) { ASSERT(MUTEX_HELD(&zv->zv_state_lock)); mutex_exit(&zv->zv_state_lock); ida_simple_remove(&zvol_ida, idx); return (SET_ERROR(EEXIST)); } doi = kmem_alloc(sizeof (dmu_object_info_t), KM_SLEEP); error = dmu_objset_own(name, DMU_OST_ZVOL, B_TRUE, B_TRUE, FTAG, &os); if (error) goto out_doi; error = dmu_object_info(os, ZVOL_OBJ, doi); if (error) goto out_dmu_objset_disown; error = zap_lookup(os, ZVOL_ZAP_OBJ, "size", 8, 1, &volsize); if (error) goto out_dmu_objset_disown; zv = zvol_alloc(MKDEV(zvol_major, minor), name); if (zv == NULL) { error = SET_ERROR(EAGAIN); goto out_dmu_objset_disown; } zv->zv_hash = hash; if (dmu_objset_is_snapshot(os)) zv->zv_flags |= ZVOL_RDONLY; zv->zv_volblocksize = doi->doi_data_block_size; zv->zv_volsize = volsize; zv->zv_objset = os; /* Default */ zv->zv_threading = B_TRUE; if (dsl_prop_get_integer(name, "volthreading", &volthreading, NULL) == 0) zv->zv_threading = volthreading; set_capacity(zv->zv_zso->zvo_disk, zv->zv_volsize >> 9); blk_queue_max_hw_sectors(zv->zv_zso->zvo_queue, (DMU_MAX_ACCESS / 4) >> 9); if (zv->zv_zso->use_blk_mq) { /* * IO requests can be really big (1MB). When an IO request * comes in, it is passed off to zvol_read() or zvol_write() * in a new thread, where it is chunked up into 'volblocksize' * sized pieces and processed. So for example, if the request * is a 1MB write and your volblocksize is 128k, one zvol_write * thread will take that request and sequentially do ten 128k * IOs. This is due to the fact that the thread needs to lock * each volblocksize sized block. So you might be wondering: * "instead of passing the whole 1MB request to one thread, * why not pass ten individual 128k chunks to ten threads and * process the whole write in parallel?" The short answer is * that there's a sweet spot number of chunks that balances * the greater parallelism with the added overhead of more * threads. The sweet spot can be different depending on if you * have a read or write heavy workload. Writes typically want * high chunk counts while reads typically want lower ones. On * a test pool with 6 NVMe drives in a 3x 2-disk mirror * configuration, with volblocksize=8k, the sweet spot for good * sequential reads and writes was at 8 chunks. */ /* * Below we tell the kernel how big we want our requests * to be. You would think that blk_queue_io_opt() would be * used to do this since it is used to "set optimal request * size for the queue", but that doesn't seem to do * anything - the kernel still gives you huge requests * with tons of little PAGE_SIZE segments contained within it. * * Knowing that the kernel will just give you PAGE_SIZE segments * no matter what, you can say "ok, I want PAGE_SIZE byte * segments, and I want 'N' of them per request", where N is * the correct number of segments for the volblocksize and * number of chunks you want. */ #ifdef HAVE_BLK_MQ if (zvol_blk_mq_blocks_per_thread != 0) { unsigned int chunks; chunks = MIN(zvol_blk_mq_blocks_per_thread, UINT16_MAX); blk_queue_max_segment_size(zv->zv_zso->zvo_queue, PAGE_SIZE); blk_queue_max_segments(zv->zv_zso->zvo_queue, (zv->zv_volblocksize * chunks) / PAGE_SIZE); } else { /* * Special case: zvol_blk_mq_blocks_per_thread = 0 * Max everything out. */ blk_queue_max_segments(zv->zv_zso->zvo_queue, UINT16_MAX); blk_queue_max_segment_size(zv->zv_zso->zvo_queue, UINT_MAX); } #endif } else { blk_queue_max_segments(zv->zv_zso->zvo_queue, UINT16_MAX); blk_queue_max_segment_size(zv->zv_zso->zvo_queue, UINT_MAX); } blk_queue_physical_block_size(zv->zv_zso->zvo_queue, zv->zv_volblocksize); blk_queue_io_opt(zv->zv_zso->zvo_queue, zv->zv_volblocksize); blk_queue_max_discard_sectors(zv->zv_zso->zvo_queue, (zvol_max_discard_blocks * zv->zv_volblocksize) >> 9); blk_queue_discard_granularity(zv->zv_zso->zvo_queue, zv->zv_volblocksize); #ifdef QUEUE_FLAG_DISCARD blk_queue_flag_set(QUEUE_FLAG_DISCARD, zv->zv_zso->zvo_queue); #endif #ifdef QUEUE_FLAG_NONROT blk_queue_flag_set(QUEUE_FLAG_NONROT, zv->zv_zso->zvo_queue); #endif #ifdef QUEUE_FLAG_ADD_RANDOM blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, zv->zv_zso->zvo_queue); #endif /* This flag was introduced in kernel version 4.12. */ #ifdef QUEUE_FLAG_SCSI_PASSTHROUGH blk_queue_flag_set(QUEUE_FLAG_SCSI_PASSTHROUGH, zv->zv_zso->zvo_queue); #endif ASSERT3P(zv->zv_kstat.dk_kstats, ==, NULL); error = dataset_kstats_create(&zv->zv_kstat, zv->zv_objset); if (error) goto out_dmu_objset_disown; ASSERT3P(zv->zv_zilog, ==, NULL); zv->zv_zilog = zil_open(os, zvol_get_data, &zv->zv_kstat.dk_zil_sums); if (spa_writeable(dmu_objset_spa(os))) { if (zil_replay_disable) replayed_zil = zil_destroy(zv->zv_zilog, B_FALSE); else replayed_zil = zil_replay(os, zv, zvol_replay_vector); } if (replayed_zil) zil_close(zv->zv_zilog); zv->zv_zilog = NULL; /* * When udev detects the addition of the device it will immediately * invoke blkid(8) to determine the type of content on the device. * Prefetching the blocks commonly scanned by blkid(8) will speed * up this process. */ len = MIN(zvol_prefetch_bytes, SPA_MAXBLOCKSIZE); if (len > 0) { dmu_prefetch(os, ZVOL_OBJ, 0, 0, len, ZIO_PRIORITY_SYNC_READ); dmu_prefetch(os, ZVOL_OBJ, 0, volsize - len, len, ZIO_PRIORITY_SYNC_READ); } zv->zv_objset = NULL; out_dmu_objset_disown: dmu_objset_disown(os, B_TRUE, FTAG); out_doi: kmem_free(doi, sizeof (dmu_object_info_t)); /* * Keep in mind that once add_disk() is called, the zvol is * announced to the world, and zvol_open()/zvol_release() can * be called at any time. Incidentally, add_disk() itself calls * zvol_open()->zvol_first_open() and zvol_release()->zvol_last_close() * directly as well. */ if (error == 0) { rw_enter(&zvol_state_lock, RW_WRITER); zvol_insert(zv); rw_exit(&zvol_state_lock); error = zvol_os_add_disk(zv->zv_zso->zvo_disk); } else { ida_simple_remove(&zvol_ida, idx); } return (error); } void zvol_os_rename_minor(zvol_state_t *zv, const char *newname) { int readonly = get_disk_ro(zv->zv_zso->zvo_disk); ASSERT(RW_LOCK_HELD(&zvol_state_lock)); ASSERT(MUTEX_HELD(&zv->zv_state_lock)); strlcpy(zv->zv_name, newname, sizeof (zv->zv_name)); /* move to new hashtable entry */ zv->zv_hash = zvol_name_hash(newname); hlist_del(&zv->zv_hlink); hlist_add_head(&zv->zv_hlink, ZVOL_HT_HEAD(zv->zv_hash)); /* * The block device's read-only state is briefly changed causing * a KOBJ_CHANGE uevent to be issued. This ensures udev detects * the name change and fixes the symlinks. This does not change * ZVOL_RDONLY in zv->zv_flags so the actual read-only state never * changes. This would normally be done using kobject_uevent() but * that is a GPL-only symbol which is why we need this workaround. */ set_disk_ro(zv->zv_zso->zvo_disk, !readonly); set_disk_ro(zv->zv_zso->zvo_disk, readonly); dataset_kstats_rename(&zv->zv_kstat, newname); } void zvol_os_set_disk_ro(zvol_state_t *zv, int flags) { set_disk_ro(zv->zv_zso->zvo_disk, flags); } void zvol_os_set_capacity(zvol_state_t *zv, uint64_t capacity) { set_capacity(zv->zv_zso->zvo_disk, capacity); } int zvol_init(void) { int error; /* * zvol_threads is the module param the user passes in. * * zvol_actual_threads is what we use internally, since the user can * pass zvol_thread = 0 to mean "use all the CPUs" (the default). */ static unsigned int zvol_actual_threads; if (zvol_threads == 0) { /* * See dde9380a1 for why 32 was chosen here. This should * probably be refined to be some multiple of the number * of CPUs. */ zvol_actual_threads = MAX(num_online_cpus(), 32); } else { zvol_actual_threads = MIN(MAX(zvol_threads, 1), 1024); } /* * Use atleast 32 zvol_threads but for many core system, * prefer 6 threads per taskq, but no more taskqs * than threads in them on large systems. * * taskq total * cpus taskqs threads threads * ------- ------- ------- ------- * 1 1 32 32 * 2 1 32 32 * 4 1 32 32 * 8 2 16 32 * 16 3 11 33 * 32 5 7 35 * 64 8 8 64 * 128 11 12 132 * 256 16 16 256 */ zv_taskq_t *ztqs = &zvol_taskqs; uint_t num_tqs = MIN(num_online_cpus(), zvol_num_taskqs); if (num_tqs == 0) { num_tqs = 1 + num_online_cpus() / 6; while (num_tqs * num_tqs > zvol_actual_threads) num_tqs--; } uint_t per_tq_thread = zvol_actual_threads / num_tqs; if (per_tq_thread * num_tqs < zvol_actual_threads) per_tq_thread++; ztqs->tqs_cnt = num_tqs; ztqs->tqs_taskq = kmem_alloc(num_tqs * sizeof (taskq_t *), KM_SLEEP); error = register_blkdev(zvol_major, ZVOL_DRIVER); if (error) { kmem_free(ztqs->tqs_taskq, ztqs->tqs_cnt * sizeof (taskq_t *)); ztqs->tqs_taskq = NULL; printk(KERN_INFO "ZFS: register_blkdev() failed %d\n", error); return (error); } #ifdef HAVE_BLK_MQ if (zvol_blk_mq_queue_depth == 0) { zvol_actual_blk_mq_queue_depth = BLKDEV_DEFAULT_RQ; } else { zvol_actual_blk_mq_queue_depth = MAX(zvol_blk_mq_queue_depth, BLKDEV_MIN_RQ); } if (zvol_blk_mq_threads == 0) { zvol_blk_mq_actual_threads = num_online_cpus(); } else { zvol_blk_mq_actual_threads = MIN(MAX(zvol_blk_mq_threads, 1), 1024); } #endif for (uint_t i = 0; i < num_tqs; i++) { char name[32]; (void) snprintf(name, sizeof (name), "%s_tq-%u", ZVOL_DRIVER, i); ztqs->tqs_taskq[i] = taskq_create(name, per_tq_thread, maxclsyspri, per_tq_thread, INT_MAX, TASKQ_PREPOPULATE | TASKQ_DYNAMIC); if (ztqs->tqs_taskq[i] == NULL) { for (int j = i - 1; j >= 0; j--) taskq_destroy(ztqs->tqs_taskq[j]); unregister_blkdev(zvol_major, ZVOL_DRIVER); kmem_free(ztqs->tqs_taskq, ztqs->tqs_cnt * sizeof (taskq_t *)); ztqs->tqs_taskq = NULL; return (-ENOMEM); } } zvol_init_impl(); ida_init(&zvol_ida); return (0); } void zvol_fini(void) { zv_taskq_t *ztqs = &zvol_taskqs; zvol_fini_impl(); unregister_blkdev(zvol_major, ZVOL_DRIVER); if (ztqs->tqs_taskq == NULL) { ASSERT3U(ztqs->tqs_cnt, ==, 0); } else { for (uint_t i = 0; i < ztqs->tqs_cnt; i++) { ASSERT3P(ztqs->tqs_taskq[i], !=, NULL); taskq_destroy(ztqs->tqs_taskq[i]); } kmem_free(ztqs->tqs_taskq, ztqs->tqs_cnt * sizeof (taskq_t *)); ztqs->tqs_taskq = NULL; } ida_destroy(&zvol_ida); } /* BEGIN CSTYLED */ module_param(zvol_inhibit_dev, uint, 0644); MODULE_PARM_DESC(zvol_inhibit_dev, "Do not create zvol device nodes"); module_param(zvol_major, uint, 0444); MODULE_PARM_DESC(zvol_major, "Major number for zvol device"); module_param(zvol_threads, uint, 0444); MODULE_PARM_DESC(zvol_threads, "Number of threads to handle I/O requests. Set" "to 0 to use all active CPUs"); module_param(zvol_request_sync, uint, 0644); MODULE_PARM_DESC(zvol_request_sync, "Synchronously handle bio requests"); module_param(zvol_max_discard_blocks, ulong, 0444); MODULE_PARM_DESC(zvol_max_discard_blocks, "Max number of blocks to discard"); module_param(zvol_num_taskqs, uint, 0444); MODULE_PARM_DESC(zvol_num_taskqs, "Number of zvol taskqs"); module_param(zvol_prefetch_bytes, uint, 0644); MODULE_PARM_DESC(zvol_prefetch_bytes, "Prefetch N bytes at zvol start+end"); module_param(zvol_volmode, uint, 0644); MODULE_PARM_DESC(zvol_volmode, "Default volmode property value"); #ifdef HAVE_BLK_MQ module_param(zvol_blk_mq_queue_depth, uint, 0644); MODULE_PARM_DESC(zvol_blk_mq_queue_depth, "Default blk-mq queue depth"); module_param(zvol_use_blk_mq, uint, 0644); MODULE_PARM_DESC(zvol_use_blk_mq, "Use the blk-mq API for zvols"); module_param(zvol_blk_mq_blocks_per_thread, uint, 0644); MODULE_PARM_DESC(zvol_blk_mq_blocks_per_thread, "Process volblocksize blocks per thread"); #endif #ifndef HAVE_BLKDEV_GET_ERESTARTSYS module_param(zvol_open_timeout_ms, uint, 0644); MODULE_PARM_DESC(zvol_open_timeout_ms, "Timeout for ZVOL open retries"); #endif /* END CSTYLED */