This commit adds Debian 13 alias Trixie to the checked operating
systems. The image needs to be run with UEFI support.
Current Debian version overview:
- Debian 11 (Bullseye) -> "oldoldstable"
- Debian 12 (Bookworm) -> "oldstable"
- Debian 13 (Trixie) -> new "stable"
The CI will be run on Debian 12 and Debian 13 now.
Debian 11 is kept, but won't be used automatically.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17648
6cf17f65 (#17456) introduced a change to `configure.ac` which
breaks the patching done in the Debian packages DKMS source
installation phase. This results in a failed module build.
Adapt the awk script doing the patching to handle the added
`AC_CONFIG_FILE` entry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Tested-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17633Closes#17646
In FreeBSD there is now a pathconf name _PC_HAS_HIDDENSYSTEM.
This patch adds support for it to OpenZFS.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca>
Closes#17518
Runs `zfs mount -R <dataset>` at boot, after `zfs mount -a`.
Intended to replace `mountpoint=legacy` in certain mount setups.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Meriel Luna Mittelbach <lunarlambda@gmail.com>
Closes#17483
The field is subsequently accessed in zfs_mknode(), in
zfs_inherit_projid(). The Linux implementation of zfs_create_fs() has
this initialization already; there is no counterpart to
zfs_create_share_dir() that I can see.
Reported-by: KMSAN
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes#17486
In the past there have been times when we need to generate new RPMs
for an existing ZFS release. Typically this happens when a new RHEL
version comes out and the kernel symbols no longer match. To get
users to auto-update we just bump the patch number. For example, we
had to create zfs-2.1.13-1 for EL8.8 and zfs-2.1.13-2 for EL8.9.
This commit adds an optional patch level text box to the github
package builder runner.
In addition, this commit also uses `hostnamectl` instead of `hostname`
for F42+ compatibility, if available.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17638
This check is currently limited to checking mismatches that occur in the
same stack frame. It does not detect across stack frames.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard@ryao.dev>
Closes#17352
In e8f0aa143e, the SONAMEs and package
names for libzfs and libzpool were bumped. The `contrib/debian/control`
file did not declare a conflict/replacement with the old package name.
This can cause dpkg to leave a system in an inconsistent state if the
old package is not manually uninstalled first.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Patrick Fasano <patrick@patrickfasano.com>
Closes#17586
In syncing mode, zfs_putpages() would put the entire range of pages onto
the ZIL, then return VM_PAGER_OK for each page to the kernel. However,
an associated zil_commit() or txg sync had not happened at this point,
so the write may not actually be on disk.
So, we rework that case to use a ZIL commit callback, and do the
post-write work of undirtying the page and signaling completion there.
We return VM_PAGER_PEND to the kernel instead so it knows that we will
take care of it.
The original version of this (238eab7dc1) copied the Linux model and did
the cleanup in a ZIL callback for both async and sync. This was a
mistake, as FreeBSD does not have a separate "busy for writeback" flag
like Linux which keeps the page usable. The full sbusy flag locks the
entire page out until the itx callback fires, which for async is after
txg sync, which could be literal seconds in the future.
For the async case, the data is already on the DMU and the in-memory
ZIL, which is sufficient for async writeback, so the old method of
logging it without a callback, undirtying the page and returning is more
than sufficient and reclaims that lost performance.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17533
Systems with a large number of CPU cores (192+) may trigger the large
allocation warning in multilist_create() on Linux. Silence the warning
by converting the allocation to vmem_alloc().
On Linux this results in a call to kvalloc() which will alloc vmem
for large allocations and kmem for small allocations.
On FreeBSD both vmem_alloc and kmem_alloc internally use the same
allocator so there is no functional change.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17616
Allow zstd_mempool_init() to allocate using vmem_alloc() instead
of kmem_alloc() to silence the large allocation warning on Linux
during module load when the system has a large number of CPUs.
It's not at all clear to me that scaling the allocation size with
the number of CPUs is beneficial and that should be evaluated.
But for the moment this should resolve the warning without
introducing any unexpected side effects.
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17620Closes#11557
This converts the body of a ZED slack notification from
plain text to code block style to help with readability.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: René Wirnata <rene.wirnata@pandascience.net>
Closes#17610
03987f71e3 (#16069) added a workaround to get the blk-mq hardware
context for older kernels that don't cache it in the struct request.
However, this workaround appears to be incomplete.
In 4.19, the rq data context is optional. If its not initialised, then
the cached rq->cpu will be -1, and so using it to index into mq_map
causes a crash.
Given that the upstream 4.19 is now in extended LTS and rarely seen,
RHEL8 4.18+ has long carried "modern" blk-mq support, and the cached
hardware context has been available since 5.1, I'm not going to huge
lengths to get queue selection correct for the very few people that are
likely to feel it. To that end, we simply call raw_smp_processor_id() to
get a valid CPU id and use that instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17597
The location of zgenhostid was changed in 0ae733c7a (Install zgenhostid
to sbindir, 2021-01-21). We include all files within sbindir two lines
earlier, which causes rpmbuild to report:
File listed twice: /sbin/zgenhostid
Drop the redundant entry from the %files section.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Closes#17601
Currently we fail the compilation via the #error directive if
`HAVE_XSAVE` isn't defined. This breaks i586 builds since we check
the toolchains SIMD support only on i686 and onward.
Remove the requirement to fix the build on i586.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#13303Closes#17590
The structure of zfs_putpage() and its callers is tricky to follow.
There's a lot more we could do to improve it, but at least now we have
some description of one of the trickier bits.
Writing this exposed a very subtle bug: most async pages pushed out
through zpl_putpages() would go to the ZIL with commit=false, which can
yield a less-efficient write policy. So this commit updates that too.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
For async page writeback, we do not need to wait for the page to be on
disk before returning to the caller; it's enough that the data from the
dirty page be on the DMU and in the in-memory ZIL, just like any other
write.
So, if this is not a syncing write, don't add a callback to the itx, and
instead just unlock the page immediately.
(This is effectively the same concept used for FreeBSD in d323fbf49c).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584Closes#14290
All this machinery is there to try to understand when there an async
writeback waiting to complete because the intent log callbacks are still
outstanding, and force them with a timely zil_commit(). The next commit
fixes this properly, so there's no need for all this extra housekeeping.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17584
Adjust the regexes to match the test line with timestamps, then remove
them for the summary. The internal timestamp is still in the full logs.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17045
When reviewing test output after a failure, it's often quite difficult
to work out the order and timing of events, and to correlate test suite
output with kernel logs.
This adds timestamps to ZTS output to help with this, in three places:
- all of the standard log_XXX functions ultimately end up in _printline,
which now prefixes output with a timestamp. An escape hatch
environment variable is provided for user_cmd, which often calls the
logging functions while also depending on the captured output.
- the test runner logging function log() also now prefixes its output
with a timestamp.
- on failure, when capturing the kernel log in zfs_dmesg.ksh, the "iso"
time format is requested.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17045
The latest Debian 11 image includes bullseye-backports as a default
repository in the /etc/apt/sources.list. However, this repository
has gone end of life which effectively breaks the default install.
We shouldn't need anything in backports so lets unconditionally
remove backports on all Debian builders to resolve the issue.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17569
The linux kernel modules haven't been building successfully when the
build occurs in a separate directory than the source code, which is a
common build pattern in Linux. Was not able to determine the root cause,
but the %.o targets in subdirectories are no longer being matched by the
pattern targets in the Linux Kbuild system. This change fixes the issue
by dynamically creating the missing ones inside our Kbuild.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes#17517
When examining the root dataset with zdb -k, we get into a mismatched
state. main() knows we are not examining the whole pool, but it strips
off the trailing slash. import_checkpointed_state() then thinks we are
examining the whole pool, and does not update the target path
appropriately. The fix is to directly inform import_checkpointed_state
that we are examining a filesystem, and not the whole pool.
Sponsored-by: Klara, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17536
Testing on CentOS Stream provides several months advance notice of
changes coming to the RHEL kernel. This should help OpenZFS be
proactive instead of reactive to new RHEL minor versions.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Carl George <carlwgeorge@gmail.com>
ZFS-CI-Type: full
Closes#16904Closes#17526
The Cirrus_CI was planned for testing FreeBSD, but never really used I
think. Currently it's not needed anymore, so remove it.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17155Closes#17535
This reverts commit 2076011e0c. The
comment which explains EINVAL should be expected for this case was
wrong, not the code. The kernel will return ENOTSUP when attaching
a distributed spare to the wrong top-level dRAID vdev. See the
check for this in spa_vdev_attach().
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17503
Before running a pass zs_enospc_count is checked to free up some space
by destroying a random dataset. But the space freed may still be not
re-usable during the TXG_DEFER window breaking the next dataset creation
in ztest_generic_run().
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Igor Ostapenko <igor.ostapenko@klarasystems.com>
Closes#17506
When running ztest under the CI a common failure mode is for the
underlying filesystem to run out of available free space. Since
the storage associated with a GitHub-hosted running is fixed, we
instead create a pool and use a compressed ZFS dataset to store
the ztest vdev files. This significantly increases the available
capacity since the data written by ztest is highly compressible.
A compression ratio of over 40:1 is conservatively achieved using
the default lz4 compression. Autotrimming is enabled to ensure
freed blocks are discarded from the backing cipool vdev file.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17501
71216b91d2 introduced a regression
on debian/ubuntu systems during build.
The reason being, that building the RPM for pyzfs was using
a different library path than building the library itself.
This is now harmonized.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Rüegg <martin.rueegg@metaworx.ch>
Closes#16155Closes#17480
Fixes an obvious typo, where a variable was missing the required
leading dollar sign ($)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Martin Rüegg <martin.rueegg@metaworx.ch>
Closes#17480
This allows to change the meaning of priority differences in FreeBSD
without requiring code changes in ZFS.
This upstreams commit fd141584cf89d7d2 from FreeBSD src.
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17489
FreeBSD provides CI-IMAGES since some time. These images are
based on nuageinit, which does not support fqdn and sudo for
example. So we need currently some workarounds to get it
working.
The FreeBSD images will be more compatible with cloud-init in
some near future. Then we can remove the workaround things.
These versions are used for testing:
- freebsd13-4r (RELEASE)
- freebsd14-3s (STABLE)
- freebsd15-0c (CURRENT)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17462
Older kernel versions run make outside of the build directory. This
works since all paths are absolute. Relative paths will fail in such
a scenario.
Use an absolute path to the objtool wrapper as well, since the
relative path breaks the build on older kernels.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17541
Linux 5.16 by default fails the build on objtool warnings. We have
known and understood objtool warnings we can't fix without
involving Linux maintainers.
To work around this we introduce an objtool wrapper script which
removes the `--Werror` flag.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17456
It is not right, but there are few examples when TX is aborted
after being assigned in case of error. To handle it better on
production systems add extra cleanup steps.
While here, replace couple dmu_tx_abort() in simple cases.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17438
This allows to rewrite content of specified file(s) as-is without
modifications, but at a different location, compression, checksum,
dedup, copies and other parameter values. It is faster than read
plus write, since it does not require data copying to user-space.
It is also faster for sync=always datasets, since without data
modification it does not require ZIL writing. Also since it is
protected by normal range range locks, it can be done under any
other load. Also it does not affect file's modification time or
other properties.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Avoid calling dbuf_evict_one() from memory reclaim contexts (e.g. Linux
kswapd, FreeBSD pagedaemon). This prevents deadlock caused by reclaim
threads waiting for the dbuf hash lock in the call sequence:
dbuf_evict_one -> dbuf_destroy -> arc_buf_destroy
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Kaitlin Hoang <kthoang@amazon.com>
Closes#17561
Linux kernel shrinker in the context of null/root memcg does not scan
dentry and inode caches added by a task running in non-root memcg. For
ZFS this means that dnode cache routinely overflows, evicting valuable
meta/data and putting additional memory pressure on the system.
This patch restores zfs_prune_aliases as fallback when the kernel
shrinker does nothing, enabling zfs to actually free dnodes. Moreover,
it (indirectly) calls arc_evict when dnode_size > dnode_limit.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17487Closes#17542
Loss of one indirect block of the meta dnode likely means loss of
the whole dataset. It is worse than one file that the man page
promises, and in my opinion is not much better than "none" mode.
This change restores redundancy of the meta-dnode indirect blocks,
while same time still corrects expectations in the man page.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17339
As discussed in the comments of PR #17004, you can theoretically run
into a case where a gang child has more copies than the gang header,
which can lead to some odd accounting behavior (and even trip a
VERIFY). While the accounting code could be changed to handle this, it
fundamentally doesn't seem to make a lot of sense to allow this to
happen. If the data is supposed to have a certain level of reliability,
that isn't actually achieved unless the gang_copies property is set to
match it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17484
Missed in #17073, probably because that PR was branched before #17001
was landed and never rebased.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The redundant_metadata setting in ZFS allows users to trade resilience
for performance and space savings. This applies to all data and metadata
blocks in zfs, with one exception: gang blocks. Gang blocks currently
just take the copies property of the IO being ganged and, if it's 1,
sets it to 2. This means that we always make at least two copies of a
gang header, which is good for resilience. However, if the users care
more about performance than resilience, their gang blocks will be even
more of a penalty than usual.
We add logic to calculate the number of gang headers copies directly,
and store it as a separate IO property. This is stored in the IO
properties and not calculated when we decide to gang because by that
point we may not have easy access to the relevant information about what
kind of block is being stored. We also check the redundant_metadata
property when doing so, and use that to decide whether to store an extra
copy of the gang headers, compared to the underlying blocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
While booting, only the needed 256KiB benchmarks are done now.
The delay for checking all checksums occurs when requested via:
- Linux: cat /proc/spl/kstat/zfs/chksum_bench
- FreeBSD: sysctl kstat.zfs.misc.chksum_bench
Reported by: Lahiru Gunathilake <gunathilakebllg@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Co-authored-by: Colin Percival <cperciva@tarsnap.com>
Closes#17563Closes#17560
When we're passivating a metaslab group we start by passivating the
metaslabs that have been activated for each of the allocators. To do
that, we need to provide a weight. However, currently this erroneously
always uses a segment-based weight, even if segment-based weighting is
disabled.
Use the normal weight function, which will decide which type of weight
to use.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17566
Update the default FICLONE and FICLONERANGE ioctl behavior to wait
on dirty blocks. While this does remove some control from the
application, in practice ZFS is better positioned to the optimial
thing and immediately force a TXG sync.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#17455
Currently, when reading compressed blocks with -R and decompressing
them with :d option and specifying lsize, which is normally bigger
than psize for compressed blocks, the checksum is calculated on
decompressed data. But it makes no sense since zfs always calculates
checksum on physical, i.e. compressed data. So reading the same block
produces different checksum results depending on how we read it,
whether we decompress it or not, which, again, makes no sense.
Fix: use psize instead of lsize when calculating the checksum so that
it is always calculated on the physical block size, no matter was it
compressed or not.
Signed-off-by: Andriy Tkachuk <andriy.tkachuk@seagate.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <alexander.motin@TrueNAS.com>
Closes#17547
During hotplug REMOVED events, devid matching fails for partition-based
spares because devid information is not stored in pool config for
partitioned devices. However, when devid is populated by the hotplug
event, the original code skipped the search logic entirely, skipping
vdev_guid matching and resulting in wrong device type detection that
caused spares to be incorrectly identified as l2arc devices.
Additionally, fix zfs_agent_iter_pool() to use the return value from
zfs_agent_iter_vdev() instead of relying on search parameters, which
was previously ignored. Also add pool_guid optimization to enable
targeted pool searching when pool_guid is available.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17545
On Linux, when doing path lookup with LOOKUP_RCU, dentry and inode can
be dereferenced without refcounts and locks. For this reason, dentry and
inode must only be freed after RCU grace period.
However, zfs currently frees inode in zfs_inode_destroy synchronously
and we can't use GPL-only call_rcu() in zfs directly. Fortunately, on
Linux 5.2 and after, if we define sops->free_inode(), the kernel will do
call_rcu() for us.
This issue may be triggered more easily with init_on_free=1 boot
parameter:
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:selinux_inode_permission+0x10e/0x1c0
Call Trace:
? show_trace_log_lvl+0x1be/0x2d9
? show_trace_log_lvl+0x1be/0x2d9
? show_trace_log_lvl+0x1be/0x2d9
? security_inode_permission+0x37/0x60
? __die_body.cold+0x8/0xd
? no_context+0x113/0x220
? exc_page_fault+0x6d/0x130
? asm_exc_page_fault+0x1e/0x30
? selinux_inode_permission+0x10e/0x1c0
security_inode_permission+0x37/0x60
link_path_walk.part.0.constprop.0+0xb5/0x360
? path_init+0x27d/0x3c0
path_lookupat+0x3e/0x1a0
filename_lookup+0xc0/0x1d0
? __check_object_size.part.0+0x123/0x150
? strncpy_from_user+0x4e/0x130
? getname_flags.part.0+0x4b/0x1c0
vfs_statx+0x72/0x120
? ioctl_has_perm.constprop.0.isra.0+0xbd/0x120
__do_sys_newlstat+0x39/0x70
? __x64_sys_ioctl+0x8d/0xd0
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x62/0xc7
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Co-authored-by: Chunwei Chen <david.chen@nutanix.com>
Closes#17546
Under parallel workloads ZIL may delay writes of open LWBs that
are not full enough. On suspend we do not expect anything new to
appear since zil_get_commit_list() will not let it pass, only
returning TXG number to wait for. But I suspect that waiting for
the TXG commit without having the last LWB issued may not wait for
its completion, resulting in panic described in #17509.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17521
Currently, after a failed allocation, the metaslab code recalculates the
weight for a metaslab. However, for space-based metaslabs, it uses the
maximum free segment size instead of the normal weighting
algorithm. This is presumably because the normal metaslab weight is
(roughly) intended to estimate the size of the largest free segment, but
it doesn't do that reliably at most fragmentation levels. This means
that recalculated metaslabs are forced to a weight that isn't really
using the same units as the rest of them, resulting in undesirable
behaviors. We switch this to use the normal space-weighting function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara, Inc.
Closes#17531
Use statx to verify that path-based unmounts proceed only if the
mountpoint reported by statx matches the MNTTAB entry reported by
libzfs, aborting the operation if they differ. Align
`zfs umount /path` behavior with `zfs umount dataset`.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17481
There are still a variety of bugs involving the vdev_nonrot property
that will cause problems if you try to run the test suite with
segment-based weighting disabled, and with other things in the weighting
code. Parents' nonrot property need to be updated when children are
added. When vdevs are expanded and more metaslabs are added, the weights
have to be recalculated (since the number of metaslabs is an input to
the lba bias function). When opening, faulted or unopenable children
should not be considered for whether a vdev is nonrot or not (since the
nonrot property is determined during a successful open, this can cause
false negatives). And draid spares need to have the nonrot property set
correctly.
Sponsored-by: Eshtek, creators of HexOS
Sponsored-by: Klara, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17469
dbuf_verify(): Don't need the lock, since we only compare pointers.
dbuf_findbp(): Don't need the lock, since aside of unneeded assert
we only produce the pointer, but don't de-reference it.
dnode_next_offset_level(): When working on top level indirection
should lock dnode buffer's db_rwlock, since it is our parent. If
dnode has no buffer, then it is meta-dnode or one of quotas and we
should lock the dataset's ds_bp_rwlock instead.
Reviewed-by: Alan Somers <asomers@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17441
The `scn_min_txg` can now be used not only with resilver. Instead
of checking `scn_min_txg` to determine whether it’s a resilver or
a scrub, simply check which function is defined. Thanks to this
change, a scrub_finish event is generated when performing a scrub
from the saved txg.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Closes#17432
- Don't drop L2ARC header if we have more buffers in this header.
Since we leave them the header, leave them the L2ARC header also.
Honestly we are not required to drop it even if there are no other
buffers, but then we'd need to allocate it a separate header, which
we might drop soon if the old block is really deleted. Multiple
buffers in a header likely mean active snapshots or dedup, so we
know that the block in L2ARC will remain valid. It might be rare,
but why not?
- Remove some impossible assertions and conditions.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17126
This PR condenses the FDT dedup log syncing into a single sync
pass. This reduces the overhead of modifying indirect blocks for the
dedup table multiple times per txg. In addition, changes were made to
the formula for how much to sync per txg. We now also consider the
backlog we have to clear, to prevent it from growing too large, or
remaining large on an idle system.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Authored-by: Don Brady <don.brady@klarasystems.com>
Authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17038
ZIL introduced dependencies between its write ZIOs to permit flush
defer, when we flush vdev caches only once all the write ZIOs has
completed. But it was recently spotted that it serializes not only
ZIO completions handling, but also their ready stage. It means ZIO
pipeline can't calculate checksums for the following ZIOs until all
the previous are checksumed, even though it is not required. On a
systems where memory throughput of a single CPU core is limited,
it creates single-core CPU bottleneck, which is difficult to see
due to ZIO pipeline design with many taskqueue threads.
While it would be great to bypass the ready stage waits, it would
require changes to ZIO code, and I haven't found a clean way to do
it. But I've noticed that we don't need any dependency between
the write ZIOs if the previous one has some waiters, which means
it won't defer any flushes and work as a barrier for the earlier
ones.
Bypassing it won't help large single-thread writes, since all the
write ZIOs except the last in that case won't have waiters, and
so will be dependent. But in that case the ZIO processing might
not be a bottleneck, since there will be only one thread populating
the write buffers, that will likely be the bottleneck.
But bypassing the ZIO dependency on multi-threaded write workloads
really allows them to scale beyond the checksuming throughput of
one CPU core.
My tests with writing 12 files on a same dataset on a pool with
4 striped NVMes as SLOGs from 12 threads with 1MB blocks on a
system with Xeon Silver 4114 CPU show total throughput increase
from 4.3GB/s to 8.5GB/s, increasing the SLOGs busy from ~30% to
~70%.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17458
Update the META file to reflect compatibility with the 6.15
kernel.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17393
These are only required to support these ioctls on Linux <4.5. Since
4.18 is our cutoff, we don't need this code anymore.
Also removing related test things that will never match again.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17308
It makes no sense to limit read size below the block size, since
DMU will any way consume resources for the whole block, while the
current zfs_vnops_read_chunk_size is only 1MB, which is smaller
that maximum block size of 16MB. Plus in case of misaligned
Uncached I/O the buffer may get evicted between the chunks,
requiring repeating I/Os.
On 64-bit platforms increase zfs_vnops_read_chunk_size to 32MB.
It allows to less depend on speculative prefetcher if application
requests specific size, first not waiting for prefetcher to start
and later not prefetching more than needed.
Also while there, we don't need to align reads to the chunk size,
but only to a block size, which is smaller and so more forgiving.
My profiles show ~4% of CPU time saving when reading 16MB blocks.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17415
On systems with enormous amounts of memory, the single arc_evict thread
can become a bottleneck if reads and writes are stuck behind it, waiting
for old data to be evicted before new data can take its place.
This commit adds support for evicting from multiple ARC lists in
parallel, by farming the evict work out to some number of threads and
then accumulating their results.
A new tuneable, zfs_arc_evict_threads, sets the number of threads. By
default, it will scale based on the number of CPUs.
Sponsored-by: Expensify, Inc.
Sponsored-by: Klara, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Youzhong Yang <youzhong@gmail.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Signed-off-by: Alexander Stetsenko <alex.stetsenko@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Co-authored-by: Rob Norris <rob.norris@klarasystems.com>
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Co-authored-by: Alexander Stetsenko <alex.stetsenko@klarasystems.com>
Closes#16486
This also includes removing L2 vdevs asynchronously.
This commit also guarantees that spa_load_guid is unique.
The zpool reguid feature introduced the spa_load_guid, which is a
transient value used for runtime identification purposes in the ARC.
This value is not the same as the spa's persistent pool guid.
However, the value is seeded from spa_generate_load_guid() which
does not check for uniqueness against the spa_load_guid from other
pools. Although extremely rare, you can end up with two different
pools sharing the same spa_load_guid value! So we guarantee that
the value is always unique and additionally not still in use by an
async arc flush task.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16215
- Set/remove "Work in Progress"/"Code Review Needed" for drafts.
- Remove "Accepted", "Inactive", "Revision Needed" and "Stale" on
pushes and reopens.
I hope this reduce chances of PRs being forgotten after requested
modifications done due to stale labels. It is better to have no
labels than incorrect ones saying there is nothing to look at.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16721
zfs_putpages() would put the entire range of pages onto the ZIL, then
return VM_PAGER_OK for each page to the kernel. However, an associated
zil_commit() or txg sync had not happened at this point, so the write
may not actually be on disk.
So, we rework it to use a ZIL commit callback, and do the post-write
work of undirtying the page and signaling completion there. We return
VM_PAGER_PEND to the kernel instead so it knows that we will take care
of it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
If a write is split across mutliple itxs, we only want the callback on
the last one, otherwise it will be called for every itx associated with
this single write, which makes it very hard to know what to clean up.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Mark Johnston <markj@FreeBSD.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17445
If the kernel will honour our error returns, use them. If not, fool it
by setting a writeback error on the superblock, if available.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
If the pool is suspended, we'll just block in zil_commit(). If the
system is shutting down, blocking wouldn't help anyone. So, we should
keep this test for now, but at least return an error for anyone who is
actually interested.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
The superblock pointer will always be set, as will z_log, so remove code
supporting cases that can't occur (on Linux at least).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17420
Previous dmu_tx_count_clone() was broken, stating that cloning is
similar to free. While they might be from some points, cloning
is not net-free. It will likely consume space and memory, and
unlike free it will do it no matter whether the destination has
the blocks or not (usually not, so previous code did nothing).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17431
Looking on txg_wait_synced(, 0) I've noticed that it always syncs
5 TXGs: 3 TXG_CONCURRENT_STATES + 2 TXG_DEFER_SIZE. But in case
of dmu_offset_next() we do not care about deferred frees. And even
concurrent TXGs we might not need sync all 3 if the dnode was not
dirtied in last few TXGs.
This patch makes dmu_offset_next() to sync one TXG at a time until
the dnode is clean, but no more than 3 TXG_CONCURRENT_STATES times.
My tests with random simultaneous writes and seeks over many files
on HDD pool show 7-14% performance increase.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17434
It is not right, but there are few examples when TX is aborted
after being assigned in case of error. To handle it better on
production systems add extra cleanup steps.
While here, replace couple dmu_tx_abort() in simple cases.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17438
Having high-refcount dedup entries for zero blocks is inefficient
when they could be recorded as a holes instead. Normally, zero
compression is not done if compression is disabled to not confuse
naive benchmarks. But with dedup enabled, it is expected that the
write will be skipped anyway, so we are just optimizing the way it
is skipped.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17435
5b9e695 added specific userspace versions of abd_os.h and abd_impl_os.h
for libzpool. However, abd.h and abd_impl.h, which include them, are
packaged with libzfs, so other programs building against libzfs can
fail to build, either because the headers aren't installed, or because
they aren't on any standard include path.
So, move abd_os.h and abd_impl_os.h to libspl, where they we will be
installed alongside abd.h and abd_impl.h in a known path.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16940Closes#17390Closes#17394
I've noticed that after some dedup tests system reboot ends up in
assertion about ms_defer tree not free. It seems to be caused by
DDT flushing still freeing some blocks while ZFS trying to reach
a final steady state due to spa_final_txg, while being set by
spa_export_common() on pool export, is not set when spa_unload()
is called by spa_evict_all() on system reboot/shutdown. Setting
spa_final_txg in spa_unload() fixes this issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17395
Disks can be removed either by the administrator via hotplug or by the
kernel when a disk failure occurs. The previous message implied that
removal was always manual, which could be confusing.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17400
This patch fixes a race where vdev_remove_wanted may be set after probe
initiation, which could otherwise trigger redundant fault and removal.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17400
If the kernel fails to allocate the gendisk, zvo_disk will be NULL, and
derefencing it will explode. So don't do that.
Sponsored-by: Klara, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17396
We silence `objtool` warnings on some object files using
`OBJECT_FILES_NON_STANDARD_some_file.o`. Nowadays `objtool` is
needed for CPU vulnerability mitigations and a lot more
functionality so its use is desirable.
Just remove the `OBJECT_FILES_NON_STANDARD` definitions. A follow-up
commit is needed to make the offending files standard and address
the compile time warnings.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Attila Fülöp <attila@fueloep.org>
Closes#17401Closes#17364
If a variable is only available in the kernel, then the tunable should
also only be available there.
This matters very little so long as we don't have userspace tunables,
but its still good hygeine.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
Likely it's only int64 for comparison with ssize_t, which is signed.
However, it would make no sense for it to be less than 0 or greater than
4G, so making it a regular uint will make it safe for comparison and
remove the only S64 tunable in core.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17377
failmode=continue is in a sorry state. Originally designed to fix a very
specific problem, it causes crashes and panics for most people who end
up trying to use it. At this point, we should either remove it entirely,
or try to make it more usable.
With this patch, I choose the latter. While the feature is fundamentally
unpredictable and prone to race conditions, it should be possible to get
it to the point where it can at least sometimes be useful for some
users. This patch fixes one of the major issues with failmode=continue:
it interrupts even ZIOs that are patiently waiting in line behind stuck
IOs.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17372
It was reported that channel programs' zfs.get_prop doesn't work for
dataset properties encryption and encryptionroot.
They are handled in get_special_prop due to the need to call
dsl_dataset_crypt_stats to load those dsl props.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Graham Christensen <graham@grahamc.com>
Closes#17280
In truenas_pylibzfs, we query list of encrypted datasets several times,
which is expensive. This commit exposes a public API zfs_is_encrypted()
to get encryption status from fast stat path without having to refresh
the properties.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes#17368
Before this change write log size TXG throttling mechanism was
accounting only user payload bytes. But the actual ZIL both on
disk and especially in memory include headers of hundred(s) of
bytes. Not accouting those may allow applications like
bonnie++, in their wisdom writing one byte at a time, to consume
excessive amount of memory and ZIL/SLOG in one TXG.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17373
This test covers a bug fixed by commit ea74cde: performing an
incremental non-raw send from an encrypted filesystem followed by
exporting the pool. Before that commit, exporting the sending pool
in this scenario would trigger a panic:
VERIFY(avl_is_empty(&sk->sk_dsl_keys)) failed
PANIC at dsl_crypt.c:353:spa_keystore_fini()
Call Trace:
spl_dumpstack+0x29/0x2f [spl]
spl_panic+0xd1/0xe9 [spl]
spl_assert.constprop.0+0x1a/0x30 [zfs]
spa_keystore_fini+0xc2/0xf0 [zfs]
spa_deactivate+0x25f/0x610 [zfs]
spa_evict_all+0xf4/0x200 [zfs]
spa_fini+0x13/0x140 [zfs]
zfs_kmod_fini+0x72/0xc0 [zfs]
openzfs_fini_os+0x13/0x3a [zfs]
openzfs_fini+0x9/0x6b8 [zfs]
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#17366
The man page and the usage statement from the CLI have been refactored
to abide by the ManDoc standard. Style changes include:
* Upper-case letters before lower-case
* List short options w/o arguments first
* Then list short options w/ arguments
* Then list long arguments
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Cameron Harr <harr1@llnl.gov>
Closes#17357
The man page and CLI usage statements were both a little out
of sync and neither fully alphabetized correctly. That has
been fixed. One outstanding question is whether to get rid of
the ellipses on the CLI usage.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Cameron Harr <harr1@llnl.gov>
Closes#16004Closes#17357
Without this fix, zfs_range_tree_find_in could return an overlap when
the found range starts immediately after the searched range, with no
actual overlap.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17363
This was caught when doing a manual check to see if #17352 needed to be
improved to catch mismatches across stack frames of the kind that were
first found in #17340.
Reviewed-by: George Amanakis <gamanakis@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard@ryao.dev>
Closes#17353
(cherry picked from commit 83fa80a550)
The intent is that the filesystem may have a reference to an "old"
version of the new directory, eg if it was keeping it alive because a
remote NFS client still had it open.
We don't need anything like that, so this really just changes things so
we return error codes encoded in pointers.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17229
(cherry picked from commit bb740d66de)
d634d20d1b had been intended to fix a
potential information leak issue where the compiler's optimization
passes appeared to remove `memset()` operations that sanitize sensitive
data before memory is freed for use by the rest of the kernel.
When I wrote it, I had assumed that the compiler would not remove the
other `memset()` operations, but upon reflection, I have realized that
this was a bad assumption to make. I would rather have a very slight
amount of additional overhead when calling `gcm_clear_ctx()` than risk a
future compiler remove `memset()` calls. This is likely to happen if
someone decides to try doing link time optimization and the person will
not think to audit the assembly output for issues like this, so it is
best to preempt the possibility before it happens.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Signed-off-by: Richard Yao <richard@ryao.dev>
Closes#17343
(cherry picked from commit d8a33bc0a5)
Bisecting identified the redacted send/receive as the source of the bug
for issue #12014. Specifically the call to
dsl_dataset_hold_obj(&fromds) has been replaced by
dsl_dataset_hold_obj_flags() which passes a DECRYPT flag and creates
a key mapping. A subsequent dsl_dataset_rele_flag(&fromds) is missing
and the key mapping is not cleared. This may be inadvertedly used, which
results in arc_untransform failing with ECKSUM in:
arc_untransform+0x96/0xb0 [zfs]
dbuf_read_verify_dnode_crypt+0x196/0x350 [zfs]
dbuf_read+0x56/0x770 [zfs]
dmu_buf_hold_by_dnode+0x4a/0x80 [zfs]
zap_lockdir+0x87/0xf0 [zfs]
zap_lookup_norm+0x5c/0xd0 [zfs]
zap_lookup+0x16/0x20 [zfs]
zfs_get_zplprop+0x8d/0x1d0 [zfs]
setup_featureflags+0x267/0x2e0 [zfs]
dmu_send_impl+0xe7/0xcb0 [zfs]
dmu_send_obj+0x265/0x360 [zfs]
zfs_ioc_send+0x10c/0x280 [zfs]
Fix this by restoring the call to dsl_dataset_hold_obj().
The same applies for to_ds: here replace dsl_dataset_rele(&to_ds) with
dsl_dataset_rele_flags().
Both leaked key mappings will cause a panic when exporting the
sending pool or unloading the zfs module after a non-raw send from
an encrypted filesystem.
Contributions-by: Hank Barta <hbarta@gmail.com>
Contributions-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#12014Closes#17340
(cherry picked from commit ea74cdedda)
Currently, commands that resume a scrub/errorscrub from a paused state
don't get logged in the pool history. This is because resumes actually
return ECANCELED, instead of 0. This causes the tsd code in the common
ioctl logic to not think the ioctl succeeded, which causes the
log_history ioctl to fail with EPERM. However, for resuming a scrub from
a paused state, ECANCELED is success.
There are two options for how to deal with this. The first is the one
that I implemented here; I can't find a good reason for dmu_scan to
return ECANCELED on resume instead of 0, so let's just not. The only
place we check for the ECANCELED value is in zpool_scan, where we just
convert it back to zero. However, I am aware that this is changing an
ioctl interface, which I believe is a breaking change. I don't think
it's an important change, but maybe there is someone who relies on it.
The other option that could be implemented is to either allow ECANCELED
specifically from dsl_scan in the common ioctl code, or add a generic
facility to the common ioctl code that allows each command to specify
whether or not success happened, regardless of the return values. I am
open to feedback on which option people think would be better.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#17301
(cherry picked from commit 086105f4c4)
ARC target size might drop significantly under memory pressure,
especially if current ARC size was much smaller than the target.
Since dbuf cache size is a fraction of the target ARC size, it
might need eviction too. Aside of memory from the dbuf eviction
itself, it might help ARC by making more buffers evictable.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17314
(cherry picked from commit 89a8a91582)
I've found that QEMU/KVM guest memory accounted as shared also
included into NR_FILE_PAGES. But it is actually a non-evictable
anonymous memory. Using it as a base for zfs_arc_pc_percent
parameter makes ARC to ignore shrinker requests while page cache
does not really have anything to evict, ending up in OOM killer
killing the QEMU process.
Instead use of NR_ACTIVE_FILE + NR_INACTIVE_FILE should represent
the part of a page cache that is actually evictable, which should
be safer to use as a reference for ARC scaling.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17334
(cherry picked from commit 0aa83dce99)
Allow installing a custom kernel version from the Fedora experimental
kernel repos onto the github runners. This is useful for testing if
ZFS works against a newer kernel.
Fedora has a number of repos with experimental kernel packages. This
PR allows installs from kernels in these repos:
@kernel-vanilla/stable
@kernel-vanilla/mainline
(https://fedoraproject.org/wiki/Kernel_Vanilla_Repositories)
You will need to manually kick of a github runner to test with a custom
kernel version. To do that, go to the github actions tab under
'zfs-qemu' and click the drop-down for 'run workflow'. In there you
will see a text box to specify the version (like '6.14'). The scripts
will do their best to match the version to the newest matching version
that the repos support (since they're may be multiple nightly versions
of, say, '6.14'). A full list of kernel versions can be seen in the
dependency stage output if you kick off a manual run.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#17156
(cherry picked from commit b55256e5bb)
It has been observed that the symlinks are not being created
for the disk partitions on multipath enabled systems.
This fix addresses the issue.
Signed-off-by: Diwakar Kristappagari <diwakar-k@hpe.com>
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
(cherry picked from commit e2ba0f7643)
Once we've selected a best ident for the AUTHORS file, it makes sense to
set up a corresponding mailmap entry for any other ident for that
committer, to ensure the git history also reflects this into the future.
So, here we output potential mailmap updates for a human to consider.
For the moment, this needs to be done by a human, because update_authors
uses git to get the author names, and thus is reliant on the mailmap
contents to generate its output, so having it update mailmap directly
would introduce a circular dependency that I'm not totally sure about.
It's definitely better than having to go back through the history and
check each commit by hand though.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
(cherry picked from commit ae2caf9cb0)
I've increasingly found that commits from new contributors have the
author set in the "Github noreply" obfuscated style. If they do have a
better canonical choice, it's usually in the Signed-off-by: trailer in
the commit message.
I had avoided using these in the first version of this program because
they aren't always present, aren't always correct, and some commits have
multiple signoffs. It seems however that requiring either the name or
the email address to match the commit author sufficiently narrows the
scope to be useful for the "Github noreply" situation, which is really
the main sticking point. And of course, if it gets it wrong, overriding
in .mailmap or AUTHORS is always an option.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
(cherry picked from commit 8e318fda80)
The old code would compare all the test group names to work out some
sort of common path, but it didn't appear to work consistently,
sometimes placing output in a top-level dir, other times in one or more
subdirs. (I confess, I do not quite understand what it's supposed to
do).
This is a very simple rework that simply looks at all the test group
paths, removes common leading components, and uses the remainder as the
output directory. This should work because groups paths are unique, and
means we get a output dir tree of roughly the same shape as the test
groups in the runfiles and the test source dirs themselves.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: @ImAwsumm
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17167
(cherry picked from commit 9aae14a14a)
For UIO_ITER, we are just wrapping a kernel iterator. It will take care
of its own offsets if necessary. We don't need to do anything, and if we
do try to do anything with it (like advancing the iterator by the skip
in zfs_uio_advance) we're just confusing the kernel iterator, ending up
at the wrong position or worse, off the end of the memory region.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#17298
(cherry picked from commit 2ee5b51a57)
db.db_mtx must be held any time that db.db_data is accessed. All of
these functions do have the lock held by a parent; add assertions to
ensure that it stays that way.
See https://github.com/openzfs/zfs/discussions/17118
* Refactor dbuf_read_bonus to make it obvious why db_rwlock isn't
required.
* Refactor dbuf_hold_copy to eliminate the db_rwlock
Copy data into the newly allocated buffer before assigning it to the db.
That way, there will be no need to take db->db_rwlock.
* Refactor dbuf_read_hole
In the case of an indirect hole, initialize the newly allocated buffer
before assigning it to the dmu_buf_impl_t.
Sponsored by: ConnectWise
Signed-off-by: Alan Somers <asomers@gmail.com>
Closes#17209
(cherry picked from commit c17bdc4914)
SYSCTL_SIZEOF() has been introduced in FreeBSD by commit "sysctl(9):
Ease exporting struct sizes; Discourage doing that" (713abc9880aa) in
branch 'main'. It will soon be backported to 'stable/14'. We will thus
be able to remove the old, alternate version left in the '#else' branch
as soon as 'stable/13' goes out of support (April 30, 2026).
Sponsored-by: The FreeBSD Foundation
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olivier Certner <olce@FreeBSD.org>
Closes#17309
(cherry picked from commit 78628a5c15)
With certain combinations of target ARC states balance and ghost
hit rates it was possible to get the fractions outside of allowed
range. This patch limits maximum balance adjustment speed, which
should make it impossible, and also asserts it.
Fixes#17210
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit b1ccab1721)
txg_wait_synced_sig() is "wait for txg, unless a signal arrives". We
expect that future development will require similar "wait unless X"
behaviour.
This generalises the API as txg_wait_synced_flags(), where the provided
flags describe the events that should cause the call to return.
Instead of a boolean, the return is now an error code, which the caller
can use to know which event caused the call to return.
The existing call to txg_wait_synced_sig() is now
txg_wait_synced_flags(TXG_WAIT_SIGNAL).
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
(cherry picked from commit a7de203c86)
After more CI runs and code reading after #17259 I've found that
online starts resilver via async mechanism, which does not provide
wait primitives at this time. Restore some delays to restore CI
until this is properly fixed.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
(cherry picked from commit f85c96edf7)
We should not clear scn_state and notify waiters until we call
vdev_dtl_reassess(), otherwise following offline/detach request
may fail with "no valid replicas".
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
(cherry picked from commit f86d9af16b)
`S_IFMT` is declared in `sys/stat.h`, but we cannot include this header
because it redeclares the `statx` function with different argument
types. Therefore, we define `S_IFMT` ourselves, in the same way as the
other definitions.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Closes#17293Closes#17294
(cherry picked from commit 634c172ee8)
zpool_status_003 and zpool_status_004_pos use 'dd' to trigger a read of
a file without specifying 'of=/dev/null'. This spams the ZTS logs
with ~20MB of garbage data. This commit adds 'of=/dev/null'.
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
(cherry picked from commit a6cca8a7da)
It's possible for two spares to get attached to a single failed vdev.
This happens when you have a failed disk that is spared, and then you
replace the failed disk with a new disk, but during the resilver
the new disk fails, and ZED kicks in a spare for the failed new
disk. This commit checks for that condition and disallows it.
Reviewed-by: Akash B <akash-b@hpe.com>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: #16547Closes: #17231
(cherry picked from commit f40ab9e399)
Decrease the RESILVER_MIN_TIME_MS variable from 50 to 20.
So the test, which expects two 2 resilver starts will see them.
Logfile of the seen failures before this fix:
log: NOTE: expected 2 resilver start(s) after offline/online, found 1
log: expected 2 resilver start(s) after offline/online, found 1
The test time decreases also from around 00:42 to 00:24 seconds.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16822Closes#17279
(cherry picked from commit 3b18877269)
When multiple snapshots prevent the destruction/rollback of the
respective dataset/snapshot/volume via zfs destroy or zfs rollback,
the error message does not list the blocking snapshots sorted
according to their order of creation. This causes inconvenience and can
lead to confusion, and also creates a contrast with a returned message
from zfs list -t snap function.
Closes: #12751
Signed-off-by: Artem-OSSRevival <artem.vlasenko@ossrevival.org>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 27f3d94940)
This change goes through and quotes variables where appropriate to
avoid issues with incorrect splitting. The performance tests ran into
an issue with $SUDO_COMMAND splitting incorrectly because it was not
quoted. This change fixes that issue and hopefully gets ahead of any
other similar problems.
Reviewed by: John Wren Kennedy <jwk404@gmail.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Aleksandr Liber <aleksandr.liber@perforce.com>
Closes#17235
(cherry picked from commit aa46cc9812)
### Background
Various admin operations will be invoked by some userspace task, but the
work will be done on a separate kernel thread at a later time. Snapshots
are an example, which are triggered through zfs_ioc_snapshot() ->
dsl_dataset_snapshot(), but the actual work is from a task dispatched to
dp_sync_taskq.
Many such tasks end up in dsl_enforce_ds_ss_limits(), where various
limits and permissions are enforced. Among other things, it is necessary
to ensure that the invoking task (that is, the user) has permission to
do things. We can't simply check if the running task has permission; it
is a privileged kernel thread, which can do anything.
However, in the general case it's not safe to simply query the task for
its permissions at the check time, as the task may not exist any more,
or its permissions may have changed since it was first invoked. So
instead, we capture the permissions by saving CRED() in the user task,
and then using it for the check through the secpolicy_* functions.
### Current implementation
The current code calls CRED() to get the credential, which gets a
pointer to the cred_t inside the current task and passes it to the
worker task. However, it doesn't take a reference to the cred_t, and so
expects that it won't change, and that the task continues to exist. In
practice that is always the case, because we don't let the calling task
return from the kernel until the work is done.
For Linux, we also take a reference to the current task, because the
Linux credential APIs for the most part do not check an arbitrary
credential, but rather, query what a task can do. See
secpolicy_zfs_proc(). Again, we don't take a reference on the task, just
a pointer to it.
### Changes
We change to calling crhold() on the task credential, and crfree() when
we're done with it. This ensures it stays alive and unchanged for the
duration of the call.
On the Linux side, we change the main policy checking function
priv_policy_ns() to use override_creds()/revert_creds() if necessary to
make the provided credential active in the current task, allowing the
standard task-permission APIs to do the needed check. Since the task
pointer is no longer required, this lets us entirely remove
secpolicy_zfs_proc() and the need to carry a task pointer around as
well.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit c8fa39b46c)
Don't use KSM on the FreeBSD VMs and optimize KSM settings for
Linux to have faster run times.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#17247
(cherry picked from commit ba17cedf65)
Sometimes it fails unable to see any injected write errors.
I guess writing 25KB of zeroes might be not enough to trigger
errors with probability set to 10%. Lets try to write more.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17270
(cherry picked from commit d947b9aedd)
Those tests are write-mostly at the nested pool. Considering we have
3 more layers of caching underneath, we can hint ZFS how to use the
memory better by setting primarycache=metadata.
While there, add missing zpool sync after rm in checkpoint_capacity
before we could potentially see the freed space, would not there be
a pool checkpoint.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 1ef706c4ad)
This commit adds support for using llvm-libunwind for kernels built
using llvm and clang. The two differences are that the largest register
index is given by _LIBUNWIND_HIGHEST_DWARF_REGISTER, we need to check
whether the register is a floating point register and the prototype
for unw_regname takes the unwind cursor as the first argument.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Sebastian Pauka <me@spauka.se>
Closes#17230
(cherry picked from commit 1b4826b9a2)
Originally the Lustre ZFS OSD code was going to use zfs_uio_t structs
for supporting Direct I/O with ZFS. However, this has changed to using
abd_t structs instead. This exports the proper symbols that will be used
by the Lustre ZFS OSD code.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#17256
(cherry picked from commit 7031a48c70)
Replace `sleep 15` with `zpool wait`, which should take much less
than the 15 seconds. And considering it is called 16 times, this
should save us up to 4 minutes total.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes: #17257
(cherry picked from commit 8f2c2dea3c)
- Kill workload first for faster cleanup.
- Use `zpool wait` for resilver instead of `sleep`.
- Remove irrelevant workload from `online_offline_003_neg`.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes: #17259
(cherry picked from commit cb49e7701f)
The test writes 1M of 1KB blocks, which may produce up to 1GB of
dirty data. On top of that ashift=12 likely produces additional
4GB of ZIO buffers during sync process. On top of that we likely
need some page cache since the pool reside on files. And finally
we need to cache the DDT. Not surprising that the test regularly
ends up in OOMs, possibly depending on TXG size variations.
Also replace fio with pretty strange parameter set with a set of
dd writes and TXG commits, just as we neeed here.
While here, remove compression. It has nothing to do here, but
waste CI CPU time.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 1d8f625233)
- Fix VERIFY3B() when given non-boolean values.
- Map EQUIV() into VERIFY3B(,==,) as equivalent.
- Tune messages for better readability and to closer match source
code for easier search. Unify user-space messages with kernel.
- Tune printed types and remove %px outside of Linux kernel.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: @ImAwsumm
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 4866c2fabf)
Various tools will display draid vdev names with parameters embedded in
them, but would not accept them as valid vdev names when looking them
up, making it difficult to build pipelines involving draid vdevs.
This commit makes it so that if a full draid name is offered for match,
it gets truncated at the first ':' character.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 131df3bbf2)
dbuf_prefetch_impl() should look on level of current indirect, not
the target prefetch level. dbuf_prefetch_indirect_done() should
call dnode_level_is_l2cacheable() if we have dpa_dnode to pass it.
It should fix some both false positive and negative L2ARC caching.
While there, fix redacted feature activation assertions. One was
always true, while another could give false positive if dpa_dnode
is NULL.
George Amanakis <gamanakis@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17204
(cherry picked from commit a497c5fc8b)
It seems `fio` in `ddt_dedup_vdev_limit` overwhelms the system
with the amount of dirty data caused by DDT updates within one
TXG due to tiny 1KB records used, while I see no reason for this
test to extend the TXGs beyond default.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: @ImAwsumm
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
(cherry picked from commit 21850f519b)
Since embedded blocks introduction 11 years ago, their writing was
blocked if dedup is enabled. After searching through the modern
code I see no reason for this restriction to exist. Same time
embedded blocks are dramatically cheaper. Even regular write of
so small blocks would likely be cheaper than deduplication, even
if the last is successful, not mentioning otherwise.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17113
(cherry picked from commit 09f4dd06c3)
Previous implementation of zap_leaf_array_free() put chunks on the
free list in reverse order. Also zap_leaf_transfer_entry() and
zap_entry_remove() were freeing name and value arrays in reverse
order. Together this created a mess in the free list, making
following allocations much more fragmented than necessary.
This patch re-implements zap_leaf_array_free() to keep existing
chunks order, and implements non-destructive zap_leaf_array_copy()
to be used in zap_leaf_transfer_entry() to allow properly ordered
freeing name and value arrays there and in zap_entry_remove().
With this change test of some writes and deletes shows percent of
non-contiguous chunks in DDT reducing from 61% and 47% to 0% and
17% for arrays and frees respectively. Sure some explicit sorting
could do even better, especially for ZAPs with variable-size arrays,
but it would also cost much more, while this should be very cheap.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16766
(cherry picked from commit 9a81484e35)
2025-05-28 16:00:28 -07:00
288 changed files with 5848 additions and 2151 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Tony Hutter