mirror of
https://git.proxmox.com/git/mirror_zfs.git
synced 2024-12-29 04:19:35 +03:00
ff77013053
5 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Brian Behlendorf
|
95401cb6f7 |
Enable remaining tests
Enable most of the remaining test cases which were previously disabled. The required fixes are as follows: * cache_001_pos - No changes required. * cache_010_neg - Updated to use losetup under Linux. Loopback cache devices are allowed, ZVOLs as cache devices are not. Disabled until all the builders pass reliably. * cachefile_001_pos, cachefile_002_pos, cachefile_003_pos, cachefile_004_pos - Set set_device_dir path in cachefile.cfg, updated CPATH1 and CPATH2 to reference unique files. * zfs_clone_005_pos - Wait for udev to create volumes. * zfs_mount_007_pos - Updated mount options to expected Linux names. * zfs_mount_009_neg, zfs_mount_all_001_pos - No changes required. * zfs_unmount_005_pos, zfs_unmount_009_pos, zfs_unmount_all_001_pos - Updated to expect -f to not unmount busy mount points under Linux. * rsend_019_pos - Observed to occasionally take a long time on both 32-bit systems and the kmemleak builder. * zfs_written_property_001_pos - Switched sync(1) to sync_pool. * devices_001_pos, devices_002_neg - Updated create_dev_file() helper for Linux. * exec_002_neg.ksh - Fixed mmap_exec.c to preserve errno. Updated test case to expect EPERM from Linux as described by mmap(2). * grow_pool_001_pos - Adding missing setup.ksh and cleanup.ksh scripts from OpenZFS. * grow_replicas_001_pos.ksh - Added missing $SLICE_* variables. * history_004_pos, history_006_neg, history_008_pos - Fixed by previous commits and were not enabled. No changes required. * zfs_allow_010_pos - Added missing spaces after assorted zfs commands in delegate_common.kshlib. * inuse_* - Illumos dump device tests skipped. Remaining test cases updated to correctly create required partitions. * large_files_001_pos - Fixed largest_file.c to accept EINVAL as well as EFBIG as described in write(2). * link_count_001 - Added nproc to required commands. * umountall_001 - Updated to use umount -a. * online_offline_001_* - Pull in OpenZFS change to file_trunc.c to make the '-c 0' option run the test in a loop. Included online_offline.cfg file in all test cases. * rename_dirs_001_pos - Updated to use the rename_dir test binary, pkill restricted to exact matches and total runtime reduced. * slog_013_neg, write_dirs_002_pos - No changes required. * slog_013_pos.ksh - Updated to use losetup under Linux. * slog_014_pos.ksh - ZED will not be running, manually degrade the damaged vdev as expected. * nopwrite_varying_compression, nopwrite_volume - Forced pool sync with sync_pool to ensure up to date property values. * Fixed typos in ZED log messages. Refactored zed_* helper functions to resolve all-syslog exit=1 errors in zedlog. * zfs_copies_005_neg, zfs_get_004_pos, zpool_add_004_pos, zpool_destroy_001_pos, largest_pool_001_pos, clone_001_pos.ksh, clone_001_pos, - Skip until layering pools on zvols is solid. * largest_pool_001_pos - Limited to 7eb pool, maximum supported size in 8eb-1 on Linux. * zpool_expand_001_pos, zpool_expand_003_neg - Requires additional support from the ZED, updated skip reason. * zfs_rollback_001_pos, zfs_rollback_002_pos - Properly cleanup busy mount points under Linux between test loops. * privilege_001_pos, privilege_003_pos, rollback_003_pos, threadsappend_001_pos - Skip with log_unsupported. * snapshot_016_pos - No changes required. * snapshot_008_pos - Increased LIMIT from 512K to 2M and added sync_pool to avoid false positives. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #6128 |
||
Brian Behlendorf
|
8c54ddd33a |
Enable additional test cases
Enable additional test cases, in most cases this required a few minor modifications to the test scripts. In a few cases a real bug was uncovered and fixed. And in a handful of cases where pools are layered on pools the test case will be skipped until this is supported. Details below for each test case. * zpool_add_004_pos - Skip test on Linux until adding zvols to pools is fully supported and deadlock free. * zpool_add_005_pos.ksh - Skip dumpadm portion of the test which isn't relevant for Linux. The find_vfstab_dev, find_mnttab_dev, and save_dump_dev functions were updated accordingly for Linux. Add O_EXCL to the in-use check to prevent the -f (force) option from working for mounted filesystems and improve the resulting error. * zpool_add_006_pos - Update test case such that it doesn't depend on nested pools. Switch to truncate from mkfile to reduce space requirements and speed up the test case. * zpool_clear_001_pos - Speed up test case by filling filesystem to 25% capacity. * zpool_create_002_pos, zpool_create_004_pos - Use sparse files for file vdevs in order to avoid increasing the partition size. * zpool_create_006_pos - |
||
Dan Kimmel
|
a7004725d0 |
OpenZFS 7252 - compressed zfs send / receive
OpenZFS 7252 - compressed zfs send / receive OpenZFS 7628 - create long versions of ZFS send / receive options Authored by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: George Wilson <george.wilson@delphix.com> Reviewed by: John Kennedy <john.kennedy@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <pcd@delphix.com> Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Reviewed by: David Quigley <dpquigl@davequigley.com> Reviewed by: Thomas Caputi <tcaputi@datto.com> Approved by: Dan McDonald <danmcd@omniti.com> Reviewed by: David Quigley <dpquigl@davequigley.com> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Ported-by: bunder2015 <omfgbunder@gmail.com> Ported-by: Don Brady <don.brady@intel.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Porting Notes: - Most of 7252 was already picked up during ABD work. This commit represents the gap from the final commit to openzfs. - Fixed split_large_blocks check in do_dump() - An alternate version of the write_compressible() function was implemented for Linux which does not depend on fio. The behavior of fio differs significantly based on the exact version. - mkholes was replaced with truncate for Linux. OpenZFS-issue: https://www.illumos.org/issues/7252 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5602294 Closes #6067 |
||
George Melikov
|
6faad211e3 |
zfstest: add dmesg command to $PATH
Error example in `zfs_list_007_pos`: `sudo: dmesg: command not found` Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru> Closes #6024 |
||
John Wren Kennedy
|
c1d9abf905 |
OpenZFS 7290 - ZFS test suite needs to control what utilities it can run
Authored by: John Wren Kennedy <john.kennedy@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Dan McDonald <danmcd@omniti.com> Approved by: Gordon Ross <gordon.w.ross@gmail.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru> Porting Notes: - Utilities which aren't available under Linux have been removed. - Because of sudo's default secure path behavior PATH must be explicitly reset at the top of libtest.shlib. This avoids the need for all users to customize secure path on their system. - Updated ZoL infrastructure to manage constrained path - Updated all test cases - Check permissions for usergroup tests - When testing in-tree create links under bin/ - Update fault cleanup such that missing files during cleanup aren't fatal. - Configure su environment with constrained path OpenZFS-issue: https://www.illumos.org/issues/7290 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/1d32ba6 Closes #5903 |