Commit Graph

487 Commits

Author SHA1 Message Date
Richard Elling
4be4dedb9f Improve ZTS block_device_wait debugging
The udevadm settle timeout can be 120 or 180 seconds by default
for some distributions. If a long delay is experienced, it could
be due to some strangeness in a malfunctioning device that isn't
related to the devices under test. To help debug this condition,
a notice is given if settle takes too long.

Arguments can now be passed to block_device_wait. The expected
arguments are block device pathnames.

Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes #8839
2019-09-25 11:27:47 -07:00
Richard Elling
fb52bf9b1d Block_device_wait does not return an error code
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes #8839
2019-09-25 11:27:47 -07:00
Richard Elling
a22b00f924 Remove redundant redundant remove
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes #8839
2019-09-25 11:27:47 -07:00
Richard Elling
c350e62309 Fix logic error in setpartition function
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes #8839
2019-09-25 11:27:47 -07:00
Don Brady
5108d27aec hkdf_test binary should only have one icp instance
The build for test binary hkdf_test was linking both against libicp 
and libzpool. This results in two instances of libicp inside the 
binary but the call to icp_init() only initializes one of them!

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #8850
2019-06-07 12:45:40 -07:00
Tomohiro Kusumi
94866d8309 Add link count test for root inode
Add tests for
97aa3ba44("Fix link count of root inode when snapdir is visible")
as suggested in #8727.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes #8732
2019-06-07 12:45:40 -07:00
loli10K
aaf3b30dcf Double-free of encryption wrapping key due to invalid pool properties
This commits fixes a double-free in zfs_ioc_pool_create() triggered by
specifying an unsupported combination of properties when creating a pool
with encryption enabled.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8791
2019-06-07 12:45:40 -07:00
Stoiko Ivanov
27b446f799 tests: fix cosmetic permission issues during make install
files in dist_*_SCRIPTS get installed with 0755, those in dist_*_DATA
with 0644. This commit moves all .kshlib, .shlib and .cfg files in the
testsuite to dist_pkgdata_DATA, and removes the shebang from
zpool_import.kshlib.

This ensures that the files are installed with appropriate permissions
and silences some warnings from lintian

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes #8803
2019-06-07 12:45:40 -07:00
loli10K
e0b3689ed5 zfs-tests: fix warnings when packaging some .shlib files
This change prevents the following warning when packaging some zfs-tests
files:

   *** WARNING: ./usr/src/zfs-0.8.0/tests/zfs-tests/include/zpool_script.shlib
   is executable but has empty or no shebang, removing executable bit

Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8787
2019-06-07 12:39:13 -07:00
loli10K
8cfa6d4a1c zfs-tests: verify zfs(8) and zpool(8) help message is under 80 columns
This commit updates the ZFS Test Suite to detect incorrect wrapping of
both zfs(8) and zpool(8) help message

Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8785
2019-06-07 12:39:13 -07:00
siv0
c6bbacebc8 Fix ksh-path for random_readwrite_fixed.ksh
The test in zfs-tests/tests/perf/regression/random_readwrite_fixed.ksh
is the only file to use /usr/bin/ksh in the shebang.
Change it to /bin/ksh for consistency.

Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Stoiko Ivanov <s.ivanov@proxmox.com>
Closes #8779
2019-06-07 12:39:13 -07:00
Igor K
e2e7b0a2cd Rename reservation tests from *.sh to *.ksh
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Igor Kozhukhov <igor@dilos.org>
Closes #8729
2019-06-07 12:39:13 -07:00
Brian Behlendorf
caf9dd209f
Fix send/recv lost spill block
When receiving a DRR_OBJECT record the receive_object() function
needs to determine how to handle a spill block associated with the
object.  It may need to be removed or kept depending on how the
object was modified at the source.

This determination is currently accomplished using a heuristic which
takes in to account the DRR_OBJECT record and the existing object
properties.  This is a problem because there isn't quite enough
information available to do the right thing under all circumstances.
For example, when only the block size changes the spill block is
removed when it should be kept.

What's needed to resolve this is an additional flag in the DRR_OBJECT
which indicates if the object being received references a spill block.
The DRR_OBJECT_SPILL flag was added for this purpose.  When set then
the object references a spill block and it must be kept.  Either
it is update to date, or it will be replaced by a subsequent DRR_SPILL
record.  Conversely, if the object being received doesn't reference
a spill block then any existing spill block should always be removed.

Since previous versions of ZFS do not understand this new flag
additional DRR_SPILL records will be inserted in to the stream.
This has the advantage of being fully backward compatible.  Existing
ZFS systems receiving this stream will recreate the spill block if
it was incorrectly removed.  Updated ZFS versions will correctly
ignore the additional spill blocks which can be identified by
checking for the DRR_SPILL_UNMODIFIED flag.

The small downside to this approach is that is may increase the size
of the stream and of the received snapshot on previous versions of
ZFS.  Additionally, when receiving streams generated by previous
unpatched versions of ZFS spill blocks may still be lost.

OpenZFS-issue: https://www.illumos.org/issues/9952
FreeBSD-issue: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=233277

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8668
2019-05-07 15:18:44 -07:00
Tomohiro Kusumi
9c53e51616 Fix zfs set atime|relatime=off|on behavior on inherited datasets
`zfs set atime|relatime=off|on` doesn't disable or enable the property
on read for datasets whose property was inherited from parent, until
a dataset is once unmounted and mounted again.

(The properties start to work properly if a dataset is once unmounted
and mounted again. The difference comes from regular mount process,
e.g. via zpool import, uses mount options based on properties read
from ondisk layout for each dataset, whereas
`zfs set atime|relatime=off|on` just remounts a specified dataset.)

--
 # zpool create p1 <device>
 # zfs create p1/f1
 # zfs set atime=off p1
 # echo test > /p1/f1/test
 # sync
 # zfs list
 NAME    USED  AVAIL     REFER  MOUNTPOINT
 p1      176K  18.9G     25.5K  /p1
 p1/f1    26K  18.9G       26K  /p1/f1
 # zfs get atime
 NAME   PROPERTY  VALUE  SOURCE
 p1     atime     off    local
 p1/f1  atime     off    inherited from p1
 # stat /p1/f1/test | grep Access | tail -1
 Access: 2019-04-26 23:32:33.741205192 +0900
 # cat /p1/f1/test
 test
 # stat /p1/f1/test | grep Access | tail -1
 Access: 2019-04-26 23:32:50.173231861 +0900
         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ changed by read(2)
--

The problem is that zfsvfs::z_atime which was probably intended to keep
incore atime state just gets updated by a callback function of "atime"
property change, atime_changed_cb(), and never used for anything else.

Since now that all file read and atime update use a common function
zpl_iter_read_common() -> file_accessed(), and whether to update atime
via ->dirty_inode() is determined by atime_needs_update(),
atime_needs_update() needs to return false once atime is turned off.
It currently continues to return true on `zfs set atime=off`.

Fix atime_changed_cb() by setting or dropping SB_NOATIME in VFS super
block depending on a new atime value, so that atime_needs_update() works
as expected after property change.

The same problem applies to "relatime" except that a self contained
relatime test is needed. This is because relatime_need_update() is based
on a mount option flag MNT_RELATIME, which doesn't exist in datasets
with inherited "relatime" property via `zfs set relatime=...`, hence it
needs its own relatime test zfs_relatime_need_update().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes #8674 
Closes #8675
2019-05-07 10:06:30 -07:00
Tom Caputi
fa24166074 Add feature check for 'zpool resilver' command
The 'zpool resilver' command requires that the resilver_defer
feature is active on the pool. Unfortunately, the check for
this was left out of the original patch. This commit simply
corrects this so that the command properly returns an error
in this case.

Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8700
2019-05-02 16:42:31 -07:00
Tomohiro Kusumi
5b1443c47e Use sigaction(2) instead of sigset(3) for portability
sigset(3) isn't portable.
This code fails to compile on platforms without sigset(3).
Use sigaction(2).

--
largest_file.c: In function 'main':
largest_file.c:75:9: error: implicit declaration of function 'sigset'; did you mean 'sigvec'? [-Werror=implicit-function-declaration]
  (void) sigset(SIGXFSZ, sigxfsz);
         ^~~~~~
         sigvec

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes #8593
2019-04-30 20:45:17 -07:00
Tom Caputi
c2c6eadf29 Fix issues with truncated files in raw sends
When receiving a raw send stream only reallocated objects
whose contents were not freed by the standard indicators
should call dmu_free_long_range().

Furthermore, if calling dmu_free_long_range() is required
then the objects current block size must be used and not
the new block size.

Two additional test cases were added to provided realistic
test coverage for processing reallocated objects which are
part of a raw receive.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8528
Closes #8607
2019-04-15 15:28:48 -07:00
Richard Laager
83472fabe5 Fix hierarchy misspellings
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reported-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #8563
Closes #8622
2019-04-14 19:06:34 -07:00
Tomohiro Kusumi
703f791d35 Don't hard-code number of ioctls for portability
Use (ZFS_IOC_LAST - ZFS_IOC_FIRST) instead of 256.
It seems 256 is just a number large enough to hold ioctls
at the moment.

Using 256 also causes compile-time warning or error
on platfoms whose enum zfs_ioc definition differs.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Closes #8598
2019-04-14 11:13:34 -07:00
Brian Behlendorf
b92f5d9f82
Fix issue in receive_object() during reallocation
When receiving an object to a previously allocated interior slot
the new object should be "allocated" by setting DMU_NEW_OBJECT,
not "reallocated" with dnode_reallocate().  For resilience verify
the slot is free as required in case the stream is malformed.

Add a test case to generate more realistic incremental send streams
that force reallocation to occur during the receive.

Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8067 
Closes #8614
2019-04-12 14:28:04 -07:00
John Wren Kennedy
9e3485abfc ZTS: Make fault cleanup function more robust
The cleanup function of auto_online_001_pos does not account for the
possibility that the test may fail while a disk is still removed. If
the test run is using real disks, cleanup should involve restoring any
that are missing.

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #8579
2019-04-12 10:07:20 -07:00
Brian Behlendorf
d93d4b1acd
Revert "Fix issues with truncated files in raw sends"
This partially reverts commit 5dbf8b4ed.  This change resolved
the issues observed with truncated files in raw sends.  However,
the required changes to dnode_allocate() introduced a regression
for non-raw streams which needs to be understood.

The additional debugging improvements from the original patch
were not reverted.

Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #7378
Issue #8528
Issue #8540
Issue #8565
Close #8584
2019-04-05 17:32:56 -07:00
Don Brady
b4ddec7af6 features.kernel layout should match features.pool
The features.kernel layout should match features.pool.

Reviewed-by: Sara Hartse <sara.hartse@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #8566
2019-04-04 19:00:55 -07:00
Sara Hartse
a887d653b3 Restrict kstats and print real pointers
There are several places where we use zfs_dbgmsg and %p to
print pointers. In the Linux kernel, these values obfuscated
to prevent information leaks which means the pointers aren't
very useful for debugging crash dumps. We decided to restrict
the permissions of dbgmsg (and some other kstats while we were
at it) and print pointers with %px in zfs_dbgmsg as well as
spl_dumpstack

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: John Gallagher <john.gallagher@delphix.com>
Signed-off-by: sara hartse <sara.hartse@delphix.com>
Closes #8467 
Closes #8476
2019-04-04 18:57:06 -07:00
Tom Caputi
df583073eb Do not iterate through filesystems unnecessarily
Currently, when attempting to list snapshots ZFS may do a lot of
extra work checking child datasets. This is because the code does
not realize that it will not be able to reach any snapshots
contained within snapshots that are at the depth limit since the
snapshots of those datasets are counted as an additional layer
deeper. This patch corrects this issue.

In addition, this patch adds the ability to do perform the commands:

$ zfs list -t snapshot <dataset>
$ zfs get -t snapshot <prop> <dataset>

as a convenient way to list out properties of all snapshots of a
given dataset without having to use the depth limit.

Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8539
2019-04-01 11:58:59 -07:00
Brian Behlendorf
1b939560be
Add TRIM support
UNMAP/TRIM support is a frequently-requested feature to help
prevent performance from degrading on SSDs and on various other
SAN-like storage back-ends.  By issuing UNMAP/TRIM commands for
sectors which are no longer allocated the underlying device can
often more efficiently manage itself.

This TRIM implementation is modeled on the `zpool initialize`
feature which writes a pattern to all unallocated space in the
pool.  The new `zpool trim` command uses the same vdev_xlate()
code to calculate what sectors are unallocated, the same per-
vdev TRIM thread model and locking, and the same basic CLI for
a consistent user experience.  The core difference is that
instead of writing a pattern it will issue UNMAP/TRIM commands
for those extents.

The zio pipeline was updated to accommodate this by adding a new
ZIO_TYPE_TRIM type and associated spa taskq.  This new type makes
is straight forward to add the platform specific TRIM/UNMAP calls
to vdev_disk.c and vdev_file.c.  These new ZIO_TYPE_TRIM zios are
handled largely the same way as ZIO_TYPE_READs or ZIO_TYPE_WRITEs.
This makes it possible to largely avoid changing the pipieline,
one exception is that TRIM zio's may exceed the 16M block size
limit since they contain no data.

In addition to the manual `zpool trim` command, a background
automatic TRIM was added and is controlled by the 'autotrim'
property.  It relies on the exact same infrastructure as the
manual TRIM.  However, instead of relying on the extents in a
metaslab's ms_allocatable range tree, a ms_trim tree is kept
per metaslab.  When 'autotrim=on', ranges added back to the
ms_allocatable tree are also added to the ms_free tree.  The
ms_free tree is then periodically consumed by an autotrim
thread which systematically walks a top level vdev's metaslabs.

Since the automatic TRIM will skip ranges it considers too small
there is value in occasionally running a full `zpool trim`.  This
may occur when the freed blocks are small and not enough time
was allowed to aggregate them.  An automatic TRIM and a manual
`zpool trim` may be run concurrently, in which case the automatic
TRIM will yield to the manual TRIM.

Reviewed-by: Jorgen Lundman <lundman@lundman.net>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Contributions-by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Contributions-by: Tim Chase <tim@chase2k.com>
Contributions-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8419 
Closes #598
2019-03-29 09:13:20 -07:00
Tom Caputi
5dbf8b4edd Fix issues with truncated files in raw sends
This patch fixes a few issues with raw receives involving
truncated files:

* dnode_reallocate() now calls dnode_set_blksz() instead of
  dnode_setdblksz(). This ensures that any remaining dbufs with
  blkid 0 are resized along with their containing dnode upon
  reallocation.

* One of the calls to dmu_free_long_range() in receive_object()
  needs to check that the object it is about to free some contents
  or hasn't been completely removed already by a previous call to
  dmu_free_long_object() in the same function.

* The same call to dmu_free_long_range() in the previous point
  needs to ensure it uses the object's current block size and
  not the new block size. This ensures the blocks of the object
  that are supposed to be freed are completely removed and not
  simply partially zeroed out.

This patch also adds handling for DRR_OBJECT_RANGE records to
dprintf_drr() for debugging purposes.

Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7378 
Closes #8528
2019-03-27 11:30:48 -07:00
Richard Elling
85a150ce1e Update valid vdev types for get_disklist
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Richard Elling <Richard.Elling@RichardElling.com>
Closes #8532
2019-03-26 14:18:58 -07:00
Brian Behlendorf
db6be852da
ZTS: Detect e2fsprogs verity issue
The projectid_001_pos and projecttree_001_pos test cases use the lsattr
command to detect that the project quota bit is set correctly.  Due to
a bug in e2fsprogs-1.44.4 setting the Project 'P' bit also results in
the Verity 'V' bit being reported as set.  This will result in the test
case failing.

The issue has been resolved in e2fsprogs but in order to avoid testing
failures these two test cases are skipped when e2fsprogs-1.44.4 is
installed.

https://github.com/tytso/e2fsprogs/commit/7e5a95e3d

Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8534
2019-03-26 13:57:40 -07:00
Olaf Faaland
060f0226e6 MMP interval and fail_intervals in uberblock
When Multihost is enabled, and a pool is imported, uberblock writes
include ub_mmp_delay to allow an importing node to calculate the
duration of an activity test.  This value, is not enough information.

If zfs_multihost_fail_intervals > 0 on the node with the pool imported,
the safe minimum duration of the activity test is well defined, but does
not depend on ub_mmp_delay:

zfs_multihost_fail_intervals * zfs_multihost_interval

and if zfs_multihost_fail_intervals == 0 on that node, there is no such
well defined safe duration, but the importing host cannot tell whether
mmp_delay is high due to I/O delays, or due to a very large
zfs_multihost_interval setting on the host which last imported the pool.
As a result, it may use a far longer period for the activity test than
is necessary.

This patch renames ub_mmp_sequence to ub_mmp_config and uses it to
record the zfs_multihost_interval and zfs_multihost_fail_intervals
values, as well as the mmp sequence.  This allows a shorter activity
test duration to be calculated by the importing host in most situations.
These values are also added to the multihost_history kstat records.

It calculates the activity test duration differently depending on
whether the new fields are present or not; for importing pools with
only ub_mmp_delay, it uses

(zfs_multihost_interval + ub_mmp_delay) * zfs_multihost_import_intervals

Which results in an activity test duration less sensitive to the leaf
count.

In addition, it makes a few other improvements:
* It updates the "sequence" part of ub_mmp_config when MMP writes
  in between syncs occur.  This allows an importing host to detect MMP
  on the remote host sooner, when the pool is idle, as it is not limited
  to the granularity of ub_timestamp (1 second).
* It issues writes immediately when zfs_multihost_interval is changed
  so remote hosts see the updated value as soon as possible.
* It fixes a bug where setting zfs_multihost_fail_intervals = 1 results
  in immediate pool suspension.
* Update tests to verify activity check duration is based on recorded
  tunable values, not tunable values on importing host.
* Update tests to verify the expected number of uberblocks have valid
  MMP fields - fail_intervals, mmp_interval, mmp_seq (sequence number),
  that sequence number is incrementing, and that uberblock values match
  tunable settings.

Reviewed-by: Andreas Dilger <andreas.dilger@whamcloud.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7842
2019-03-21 12:47:57 -07:00
Brian Behlendorf
066da71e7f
Improve zpool labelclear
1) As implemented the `zpool labelclear` command overwrites
the calculated offsets of all four vdev labels even when only a
single valid label is found.  If the device as been re-purposed
but still contains a valid label this can result in space no
longer owned by ZFS being zeroed.  Prevent this by verifying
every label removed is intact before it's overwritten.

2) Address a small bug in zpool_do_labelclear() which prevented
labelclear from working on file vdevs.  Only block devices support
BLKFLSBUF, try the ioctl() but when it's reported as unsupported
this should not be fatal.

3) Fix `zpool labelclear` so it can be run on vdevs which were
removed from the pool with `zpool remove`.  Additionally, allow
intact but partial labels to be cleared as in the case of a failed
`zpool attach` or `zpool replace`.

4) Remove LABELCLEAR and LABELREAD variables for test cases.

Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Tim Chase <tim@chase2k.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #8500 
Closes #8373 
Closes #6261
2019-03-21 10:13:01 -07:00
Tom Caputi
ab7615d92c Multiple DVA Scrubbing Fix
Currently, there is an issue in the sequential scrub code which
prevents self healing from working in some cases. The scrub code
will split up all DVA copies of a bp and issue each of them
separately. The problem is that, since each of the DVAs is no
longer associated with the others, the self healing code doesn't
have the opportunity to repair problems that show up in one of the
DVAs with the data from the others.

This patch fixes this issue by ensuring that all IOs issued by the
sequential scrub code include all DVAs. Initially, only the first
DVA of each is attempted. If an issue arises, the IO is retried
with all available copies, giving the self healing code a chance
to correct the issue.

To test this change, this patch also adds the ability for zinject
to specify individual DVAs to inject read errors into. We then
add a new test case that utilizes this functionality to ensure
scrubs and self-healing reads can handle and transparently fix
issues with individual copies of blocks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8453
2019-03-15 14:14:31 -07:00
Tony Hutter
2bbec1c910 Make zpool status counters match error events count
The number of IO and checksum events should match the number of errors
seen in zpool status.  Previously there was a mismatch between the
two counts because zpool status would only count unrecovered errors,
while zpool events would get an event for *all* errors (recovered or
not).  This lead to situations where disks could be faulted for
"too many errors", while at the same time showing zero errors in zpool
status.

This fixes the zpool status error counters to increment at the same
times we post the error events.

Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #4851 
Closes #7817
2019-03-14 18:21:53 -07:00
Tom Caputi
eaed840542 Better user experience for errata 4
This patch attempts to address some user concerns that have arisen
since errata 4 was introduced.

* The errata warning has been made less scary for users without
  any encrypted datasets.

* The errata warning now clears itself without a pool reimport if
  the bookmark_v2 feature is enabled and no encrypted datasets
  exist.

* It is no longer possible to create new encrypted datasets without
  enabling the bookmark_v2 feature, thus helping to ensure that the
  errata is resolved.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Issue ##8308
Closes #8504
2019-03-14 16:48:30 -07:00
Igor K
508c5527d0 Use 'printf %s' instead of 'echo -n' for compatibility
The ksh 'echo -n' behavior on Illumos and Linux differs.  For
compatibility with others platforms switch to "printf '%s' ".

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Signed-off-by: Igor Kozhukhov <igor@dilos.org>
Closes #8501
2019-03-13 18:39:12 -07:00
Tom Caputi
5cc9ba5cf0 Make zstreamdump -v more greppable
Currently, the verbose output of zstreamdump includes new line
characters within some individual records. Presumably, this was
originally done to keep the output from getting too wide to fit
on a terminal. However, since new flags and struct members have
been added, these rules have not been maintained consistently. In
addition, these newlines can make it hard to grep the output in
some scenarios. This patch simply removes these newlines, making
the output easier to grep and removing the inconsistency.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Allan Jude <allanjude@freebsd.org>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8493
2019-03-13 11:19:23 -07:00
Tom Caputi
f00ab3f22c Detect and prevent mixed raw and non-raw sends
Currently, there is an issue in the raw receive code where
raw receives are allowed to happen on top of previously
non-raw received datasets. This is a problem because the
source-side dataset doesn't know about how the blocks on
the destination were encrypted. As a result, any MAC in
the objset's checksum-of-MACs tree that is a parent of both
blocks encrypted on the source and blocks encrypted by the
destination will be incorrect. This will result in
authentication errors when we decrypt the dataset.

This patch fixes this issue by adding a new check to the
raw receive code. The code now maintains an "IVset guid",
which acts as an identifier for the set of IVs used to
encrypt a given snapshot. When a snapshot is raw received,
the destination snapshot will take this value from the
DRR_BEGIN payload. Non-raw receives and normal "zfs snap"
operations will cause ZFS to generate a new IVset guid.
When a raw incremental stream is received, ZFS will check
that the "from" IVset guid in the stream matches that of
the "from" destination snapshot. If they do not match, the
code will error out the receive, preventing the problem.

This patch requires an on-disk format change to add the
IVset guids to snapshots and bookmarks. As a result, this
patch has errata handling and a tunable to help affected
users resolve the issue with as little interruption as
possible.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8308
2019-03-13 11:00:43 -07:00
Tom Caputi
369aa501d1 Fix handling of maxblkid for raw sends
Currently, the receive code can create an unreadable dataset from
a correct raw send stream. This is because it is currently
impossible to set maxblkid to a lower value without freeing the
associated object. This means truncating files on the send side
to a non-0 size could result in corruption. This patch solves this
issue by adding a new 'force' flag to dnode_new_blkid() which will
allow the raw receive code to force the DMU to accept the provided
maxblkid even if it is a lower value than the existing one.

For testing purposes the send_encrypted_files.ksh test has been
extended to include a variety of truncated files and multiple
snapshots. It also now leverages the xattrtest command to help
ensure raw receives correctly handle xattrs.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #8168 
Closes #8487
2019-03-13 10:52:01 -07:00
Olaf Faaland
3d31aad83e MMP writes rotate over leaves
Instead of choosing a leaf vdev quasi-randomly, by starting at the root
vdev and randomly choosing children, rotate over leaves to issue MMP
writes.  This fixes an issue in a pool whose top-level vdevs have
different numbers of leaves.

The issue is that the frequency at which individual leaves are chosen
for MMP writes is based not on the total number of leaves but based on
how many siblings the leaves have.

For example, in a pool like this:

       root-vdev
   +------+---------------+
vdev1                   vdev2
  |                       |
  |                +------+-----+-----+----+
disk1             disk2 disk3 disk4 disk5 disk6

vdev1 and vdev2 will each be chosen 50% of the time.  Every time vdev1
is chosen, disk1 will be chosen.  However, every time vdev2 is chosen,
disk2 is chosen 20% of the time.  As a result, disk1 will be sent 5x as
many MMP writes as disk2.

This may create wear issues in the case of SSDs.  It also reduces the
effectiveness of MMP as it depends on the writes being evenly
distributed for the case where some devices fail or are partitioned.

The new code maintains a list of leaf vdevs in the pool.  MMP records
the last leaf used for an MMP write in mmp->mmp_last_leaf.  To choose
the next leaf, MMP starts at mmp->mmp_last_leaf and traverses the list,
continuing from the head if the tail is reached.  It stops when a
suitable leaf is found or all leaves have been examined.

Added a test to verify MMP write distribution is even.

Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7953
2019-03-12 10:37:06 -07:00
Lorenz Brun
bf90948daf Reorder ZFS ioctls to fix cross-version compatibility
Reorder ZFS ioctls to fix cross-version compatibility.

Reviewed-by: Don Brady <don.brady@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Lorenz Brun <lorenz@dolansoft.org>
Closes #8484
2019-03-09 13:39:31 -08:00
Matthew Ahrens
c568ab8d99 zfs.8 has wrong description of "zfs program -t"
The "-t" argument to "zfs program" specifies a limit on the number of
LUA instructions that can be executed.  The zfs.8 manpage has the wrong
description.  It should be updated to match what's in zfs-program.8

Also fix the formatting of the zfs help message.

Reviewed by: Allan Jude <allanjude@freebsd.org>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #8410
2019-02-26 11:15:28 -08:00
loli10K
c44a3ec059 zvol: allow rename of in use ZVOL dataset
While ZFS allow renaming of in use ZVOLs at the DSL level without issues
the ZVOL layer does not correctly update the renamed dataset if the
device node is open (zv->zv_open_count > 0): trying to access the stale
dataset name, for instance during a zfs receive, will cause the
following failure:

VERIFY3(zv->zv_objset->os_dsl_dataset->ds_owner == zv) failed ((null) == ffff8800dbb6fc00)
PANIC at zvol.c:1255:zvol_resume()
Showing stack for process 1390
CPU: 0 PID: 1390 Comm: zfs Tainted: P           O  3.16.0-4-amd64 #1 Debian 3.16.51-3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 0000000000000000 ffffffff8151ea00 ffffffffa0758a80 ffff88028aefba30
 ffffffffa0417219 ffff880037179220 ffffffff00000030 ffff88028aefba40
 ffff88028aefb9e0 2833594649524556 6f5f767a3e2d767a 6f3e2d7465736a62
Call Trace:
 [<0>] ? dump_stack+0x5d/0x78
 [<0>] ? spl_panic+0xc9/0x110 [spl]
 [<0>] ? mutex_lock+0xe/0x2a
 [<0>] ? zfs_refcount_remove_many+0x1ad/0x250 [zfs]
 [<0>] ? rrw_exit+0xc8/0x2e0 [zfs]
 [<0>] ? mutex_lock+0xe/0x2a
 [<0>] ? dmu_objset_from_ds+0x9a/0x250 [zfs]
 [<0>] ? dmu_objset_hold_flags+0x71/0xc0 [zfs]
 [<0>] ? zvol_resume+0x178/0x280 [zfs]
 [<0>] ? zfs_ioc_recv_impl+0x88b/0xf80 [zfs]
 [<0>] ? zfs_refcount_remove_many+0x1ad/0x250 [zfs]
 [<0>] ? zfs_ioc_recv+0x1c2/0x2a0 [zfs]
 [<0>] ? dmu_buf_get_user+0x13/0x20 [zfs]
 [<0>] ? __alloc_pages_nodemask+0x166/0xb50
 [<0>] ? zfsdev_ioctl+0x896/0x9c0 [zfs]
 [<0>] ? handle_mm_fault+0x464/0x1140
 [<0>] ? do_vfs_ioctl+0x2cf/0x4b0
 [<0>] ? __do_page_fault+0x177/0x410
 [<0>] ? SyS_ioctl+0x81/0xa0
 [<0>] ? async_page_fault+0x28/0x30
 [<0>] ? system_call_fast_compare_end+0x10/0x15

Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #6263 
Closes #8371
2019-02-22 15:38:42 -08:00
loli10K
bb1be77a35 Prevent user accounting on readonly pool
Trying to mount a dataset from a readonly pool could inadvertently start
the user accounting upgrade task, leading to the following failure:

VERIFY3(tx->tx_threads == 2) failed (0 == 2)
PANIC at txg.c:680:txg_wait_synced()
Showing stack for process 2541
CPU: 2 PID: 2541 Comm: z_upgrade Tainted: P           O  3.16.0-4-amd64 #1 Debian 3.16.51-3
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 [<0>] ? dump_stack+0x5d/0x78
 [<0>] ? spl_panic+0xc9/0x110 [spl]
 [<0>] ? dnode_next_offset+0x1d4/0x2c0 [zfs]
 [<0>] ? dmu_object_next+0x77/0x130 [zfs]
 [<0>] ? dnode_rele_and_unlock+0x4d/0x120 [zfs]
 [<0>] ? txg_wait_synced+0x91/0x220 [zfs]
 [<0>] ? dmu_objset_id_quota_upgrade_cb+0x10f/0x140 [zfs]
 [<0>] ? dmu_objset_upgrade_task_cb+0xe3/0x170 [zfs]
 [<0>] ? taskq_thread+0x2cc/0x5d0 [spl]
 [<0>] ? wake_up_state+0x10/0x10
 [<0>] ? taskq_thread_should_stop.part.3+0x70/0x70 [spl]
 [<0>] ? kthread+0xbd/0xe0
 [<0>] ? kthread_create_on_node+0x180/0x180
 [<0>] ? ret_from_fork+0x58/0x90
 [<0>] ? kthread_create_on_node+0x180/0x180

This patch updates both functions responsible for checking if we can
perform user accounting to verify the pool is not readonly.

Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8424
2019-02-19 18:41:18 -08:00
Ned Bass
75d6b7ddca Add missing copyright notice to large_dnode tests
Missing copyright notices were noticed during the Illumos
RTI process. Add LLNS 2016 copyright based on original merge
date.

Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #8435
2019-02-19 18:39:10 -08:00
John Wren Kennedy
435637d1ed ZTS: user_property_002_pos fails to destroy volume
During the cleanup function of this test, an attempt to destroy a volume
can fail because the volume is busy. This leaves the system with
unexpected datasets which in turn causes subsequent failures.

Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Giuseppe Di Natale <guss80@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #8422
2019-02-19 11:12:47 -08:00
John Wren Kennedy
07237a7bc1 ZTS: clone_001_pos fails in cleanup on busy dataset
The "cleanup_all" function in this test calls "zfs destroy" which
fails approximately 30% of the time in our environment due to the
dataset being busy. Since the failure happens during cleanup, the
error is propagated to subsequent tests.

Tested by running the snapshot test group in a loop without seeing
any failures.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #8409
2019-02-15 12:45:46 -08:00
Paul Zuchowski
9c5e88b1de zfs should optionally send holds
Add -h switch to zfs send command to send dataset holds. If
holds are present in the stream, zfs receive will create them
on the target dataset, unless the zfs receive -h option is used
to skip receive of holds.

Reviewed-by: Alek Pinchuk <apinchuk@datto.com>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #7513
2019-02-15 12:41:38 -08:00
Alek P
dcec0a12c8 port async unlinked drain from illumos-nexenta
This patch is an async implementation of the existing sync
zfs_unlinked_drain() function. This function is called at mount time and
is responsible for freeing znodes that we didn't get to freeing before.
We don't have to hold mounting of the dataset until the unlinked list is
fully drained as is done now. Since we can process the unlinked set
asynchronously this results in a better user experience when mounting a
dataset with entries in the unlinked set.

Reviewed by: Jorgen Lundman <lundman@lundman.net>
Reviewed by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes #8142
2019-02-12 10:41:15 -08:00
loli10K
d8d418ff0c ZVOLs should not be allowed to have children
zfs create, receive and rename can bypass this hierarchy rule. Update
both userland and kernel module to prevent this issue and use pyzfs
unit tests to exercise the ioctls directly.

Note: this commit slightly changes zfs_ioc_create() ABI. This allow to
differentiate a generic error (EINVAL) from the specific case where we
tried to create a dataset below a ZVOL (ZFS_ERR_WRONG_PARENT).

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Matt Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
2019-02-08 15:44:15 -08:00
loli10K
4417096956 Pool allocation classes misplacing small file blocks
Due to an off-by-one condition in spa_preferred_class() we are picking
the "normal" allocation class instead of the "special" one for file
blocks with size equal to the special_small_blocks property value.

This change fix the small code issue, update the ZFS Test Suite and the
zfs(8) man page.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #8351
Closes #8361
2019-02-08 12:32:12 -08:00