Commit 2ee4e7da accidentally introduced two issues which only occur
when rebuilding the ZFS source rpm outside the ZFS build system.
1) The _dracutdir, _udevdir, and _udevruledir macros must be checked
using the 'undefined' keyword. This was just overlooked in the
patch review and does not cause a failure when using 'make pkg'
because the values are provided by the make target.
2) The default _udevruledir path included a typo.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2310
There are two common locations where udev and dracut components are
commonly installed. When building packages using the 'make rpm|deb'
targets check those common locations and pass them to rpmbuild. For
non-standard configurations these values can be provided by the
the following configure options:
--with-udevdir=DIR install udev helpers [default=check]
--with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]]
--with-dracutdir=DIR install dracut helpers [default=check]
When rebuilding using the source packages the per-distribution
default values specified in the spec file will be used. This is
the preferred way to build packages for a distribution but the
ability to override the defaults is provided as a convenience.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2310Closes#1680
This adds ability to set the location of the kernel via defines
when building from the spec files. This is useful when building
against a kernel installed in a non-standard location.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1874
From day one the various ZFS libraries should have been placed in their
own sub-packages. Primarily this allows for multiple major versions of
the libraries to be concurrently installed. It also facilitates a
smaller build environment by minimizing the required dependencies.
The specific changes required to split the libraries from the utilities
are as follows:
* libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added
and contain the versioned shared libraries. The Fedora packaging
guidelines discourage providing static libraries so they are not
included in the packages.
http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries
* The zfs-devel package was renamed libzfs2-devel and the new package
obsoletes the old zfs-devel package. This package includes all
the required headers for the libzpool2, libnvpair1, libuutil1, and
libzfs2 libraries and their respective unversioned shared libraries.
This package should eventually be split in to individual lib*-devel
packages but it will still take some work to cleanly separate them.
Therefore the libzfs2-devel package provides the expected lib*-devel
packages so the all proper dependencies can still be created.
http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages
* Moved '/sbin/ldconfig' execution from the zfs packge to each of the
new library packages as described by the packaging guidelines.
http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries
* The /usr/share/doc/ files were moved in to the libzfs2-devel package.
* Updated config/deb.am to be aware of the packaging changes. This
ensures that 'deb-utils' make target converts all the resulting
packages generated by the 'rpm-utils' target.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2329Closes: #2341
Issue: #2145
Running 'yum upgrade zfs-dkms' package could appear to work properly
and still leave you with no zfs modules installed. This will occur
when only the zfs release, and not the version, are incremented.
This may be the case for a fast moving zfs-testing repository.
During the upgrade process DKMS will realize that zfs-x.y.z is already
installed and remove it. DKMS then correctly builds the new modules
for zfs-x.y.z. However, as a final step when the old zfs-x.y.z-r is
removed the %preun script runs and removes the newly build modules.
To handle this case the %preun script has been updated to only run
when the installed version exactly matches the full spec file version.
This change also updated ChangeLog section based on the DKMS
reference spec file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
zed monitors ZFS events. When a zevent is posted, zed will run any
scripts that have been enabled for the corresponding zevent class.
Multiple scripts may be invoked for a given zevent. The zevent
nvpairs are passed to the scripts as environment variables.
Events are processed synchronously by the single thread, and there is
no maximum timeout for script execution. Consequently, a misbehaving
script can delay (or forever block) the processing of subsequent
zevents. Plans are to address this in future commits.
Initial scripts have been developed to log events to syslog
and send email in response to checksum/data/io errors and
resilver.finish/scrub.finish events. By default, email will only
be sent if the ZED_EMAIL variable is configured in zed.rc (which is
serving as a config file of sorts until a proper configuration file
is implemented).
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
zfs-fuse provides the same commands and man page names as ZoL.
Changing the names on either side would make each incompatible with
all existing documentation about ZFS. Providing bit identical files
is not possible due to differing codebases.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1866
This adds systemd unit files replacing the functionality offered by
the SysV init script found in etc/init.d.
It has been developed and tested on Fedora 19, Fedora 20
and openSuSE 13.1.
Four unit files and one target are offered.
zfs-import-cache.service:
Import pools from /etc/zfs/zpool.cache. This unit will wait for
udev to settle.
zfs-import-scan.service:
Import pools by scanning /dev/disk/by-id for zvols. This unit will
only run if /etc/zfs/zpool.cache is not present. This unit will wait
for udev to settle
zfs-mount.service:
Mount ZFS native filesystems. It contains a dependency to be loaded
before local-fs.target.
zfs-share.service:
Share NFS/SMB filesystems. This unit contains a dependency that
will cause it to be restarted whenever the smb or nfs-server unit
is restarted, restoring the shares added.
zfs.target:
This target pulls in the other units in order to start ZFS. It's
the only unit that can be enabled/disabled, all other services
are static and pulled in by dependencies. It will honour zfs=off
and zfs=no options on the kernel command line.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2108
Four new dataset properties have been added to support SELinux. They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8). When one of
these properties is set to something other than 'none'. That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.
For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:
$ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media
This will ensure the filesystem is automatically mounted with that
rootcontext. It is equivalent to manually specifying the rootcontext
with the -o option like this:
$ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media
By default all four contexts are set to 'none'. Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#1504
This is an extension of commit ffb2111. As the fedora conditional
has been added, this allows centos/rhel-6 to fall back to the
proper directory (/usr/share/dracut)
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1984
Version 2.2.0.3-20 of dkms in the EPEL/Fedora repositories added the
necessary patches to support ZoL, Therefore, the zfs-dkms requirement
on dkms is set to match that version or higher. This allows us to
drop the custom dkms build in the ZoL EPEL/Fedora repositories.
References:
https://bugzilla.redhat.com/show_bug.cgi?id=1023598
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1873
Make zfs depend on the same version of zfs-kmod, rather than on same or
better. When yum repository contains a number of versions the dependency
resolution breaks on trying to install non-latest version.
Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1677
The GNU libtool documentation states to start with a version of 0:0:0,
rather than 1:1:0. Illumos uses the name libzfs_core.so.1, so to be
consistent, we should go with 1:0:0.
http://www.gnu.org/software/libtool/manual/libtool.html#Updating-version-info
The GNU libtool documentation also provides guidence on how the version
information should be incremented. Doing this does a SONAME bump of the
libzfs and libzpool libraries. This is particularly important on Gentoo
because a SONAME bump enables portage to retain the older libraries
until any packages that link to them are rebuilt. The main example of
this is GRUB2's grub2-mkconfig, which will break unless it is rebuilt
against the new libraries.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1751
When the kmod packaging infrastructure was originally added the
dependency on the rpmfusion yum repositories was disabled. This
was done at the time in favour of getting local builds working.
Now the time has come to conditionally re-enable that functionality
so we can properly provide binary kmod packages.
./configure --with-config=srpm
make SRPM_DEFINE_KMOD='--define="repo rpmfusion"' srpm-kmod
mock rebuild zfs-kmod-x.y.z-r.el6.src.rpm
One nice benefit of finishing this work is that the generic and
fedora spl-kmod spec files can be merged again.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
By adding a dkms_version conditional it's now possible to specify
an exact version of dkms. This is used by the Fedora and EPEL
yum repositories to ensure the patched version of dkms provided
by the repository is installed. The patched version of dkms
ensures that the spl modules are built before the zfs modules.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1466
Unconditionally exit with zero to avoid returning failures
from the scriptlets. This should have been part of the
previous ba661a6 commit.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1376
Prior to adopting the kmod style packaging the zfs packages
would conditionally invoke /sbin/chkconfig to create the
proper links for the init script. This is done conditionally
because many distributions are moving away from SysV style
init scripts and we don't want to cause errors on those.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1376
Remove from the zfs package the depenencies on the zfs-dracut and
zfs-test subpackages. Neither of these packages are required for
normal operation and they bring in many unnecessary dependencies
during installation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1395
This adds ability to set the location of spl via defines when
building from the spec files. This is useful for build systems
that build spl and zfs together without installing the actual rpms.
Signed-off-by: Nathaniel Clark <Nathaniel.Clark@misrule.us>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1486
* Modified kstat_update() to read arcstats from proc.
* Fix shebang.
* Added Makefile.am entries for arcstat.py
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1506
There are a number of issues with the generic kmod RPM spec in its
current state:
- The "%{__id_u}" macro seems to not be available on some systems (e.g.
Debian squeeze). It appears it has been deprecated. Use "${__id} -u"
instead.
- The way the "--with-linux=" configure option is generated in the
non-RHEL/Fedora case is completely wrong with various newline and
escaping issues (also, $kernel_version is not available in the
generator context).
The second issue made the generator shell snippet (almost) silently
fail, which under specific circumstances can result in broken builds
against the wrong kernel sources.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1416
For the DKMS package to successfully build the kernel-devel
headers must be included along gcc, make, and perl. The ZFS
code never directly invokes perl but the kernel build system
depends on it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1380
Commit f6fb7651a0 introduced the idea
of working builds which work correctly. However, because the zfs-kmod
depends on a specific 'spl-devel-kmod = {version}-%{release}' package
and the release component is unique the dependency is never satisfied.
This requires line was introduced to ensure the correct version of the
spl is always used. In this context only the version number is required
so the release component has been dropped to satisfy the dependency.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The distribution specific init scripts where excluded from the
packaging when it was reworked. The intention is to replace
them with systemd equivilants. However, that work has not yet
been done and the init scripts are still useful so they have
been added back in to the packaging.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In order to ensure that yum-builddep pulls in all the build
requirements a generic ${kmodname}-devel-kmod provides line is
added. This allows a version of the development headers to be
included without requiring knowledge of the kernel version.
This is important because unlike rpmbuild which does correctly
expand the source rpm spec file, yum-builddep does not. Without
this generic provides line mock which relies on yum-builddep is
unable to automatically satisfy the dependency.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Because the zfs-dkms package also provides zfs-kmod for the
zfs user package yum flags this as a conflict. To avoid the
problem remove the Conflicts tag from zfs-dkms and just rely
on the one in zfs-kmod.
zfs-dkms-0.6.0-rc14.fc18.noarch has installed conflicts
zfs-kmod: zfs-dkms-0.6.0-rc14.fc18.noarch
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The spl, zfs-test, and zfs-dracut packages should be pulled in
by the core zfs package. This allows all the required zfs packages
to be installed from a yum repository by running:
yum install zfs
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Adding the 'spl-dkms = VERSION' dependency to the zfs-dkms
package ensures the spl will be installed before zfs. This
cleanly handles the initial 'yum localinstall' case.
However, this does not address the dkms rebuilds caused by
a new kernel being installed. For that we still rely on the
clunky --with-spl-timeout=<timeout> configure option which
allows the zfs compilation to be briefly delayed while the
spl components are built.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Refresh the existing RPM packaging to conform to the 'Fedora
Packaging Guidelines'. This includes adopting the kmods2
packaging standard which is used fod kmods distributed by
rpmfusion for Fedora/RHEL.
http://fedoraproject.org/wiki/Packaging:Guidelineshttp://rpmfusion.org/Packaging/KernelModules/Kmods2
While the spec files have been entirely rewritten from a
user perspective the only major changes are:
* The Fedora packages now have a build dependency on the
rpmfusion repositories. The generic kmod packages also
have a new dependency on kmodtool-1.22 but it is bundled
with the source rpm so no additional packages are needed.
* The kernel binary module packages have been renamed from
zfs-modules-* to kmod-zfs-* as specificed by kmods2.
* The is now a common kmod-zfs-devel-* package in addition
to the per-kernel devel packages. The common package
contains the development headers while the per-kernel
package contains kernel specific build products.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1341
