The correct behavior for all registered shrinkers is to return the
number of objects in their cache. In theory this allows the Linux
VM to balance memory reclaim across all registered caches.
In commit b9b3715 this behavior was disabled in favor of returning
-1 which notifies the VM that no additional objects are available
for reclaim. This was done as a workaround to resolve thrashing
in shrink_slabs() which could occur when memory was low and numerous
core where in reclaim. Unfortunately, this has been observed to
increase the likelihood of OOM events when SPL slab consumers are
responsible for consuming the majority of memory.
Therefore, this patch makes this behavior tunable. Setting the
spl_kmem_cache_reclaim module option to 0x1 will result in the
shrinker only being called once. This is the default behavior.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Closes#358
For small objects the Linux slab allocator has several advantages
over its counterpart in the SPL. These include:
1) It is more memory-efficient and packs objects more tightly.
2) It is continually tuned to maximize performance.
Therefore it makes sense to layer the SPLs slab allocator on top
of the Linux slab allocator. This allows us to leverage the
advantages above while preserving the Illumos semantics we depend
on. However, there are some things we need to be careful of:
1) The Linux slab allocator was never designed to work well with
large objects. Because the SPL slab must still handle this use
case a cut off limit was added to transition from Linux slab
backed objects to kmem or vmem backed slabs.
spl_kmem_cache_slab_limit - Objects less than or equal to this
size in bytes will be backed by the Linux slab. By default
this value is zero which disables the Linux slab functionality.
Reasonable values for this cut off limit are in the range of
4096-16386 bytes.
spl_kmem_cache_kmem_limit - Objects less than or equal to this
size in bytes will be backed by a kmem slab. Objects over this
size will be vmem backed instead. This value defaults to
1/8 a page, or 512 bytes on an x86_64 architecture.
2) Be aware that using the Linux slab may inadvertently introduce
new deadlocks. Care has been taken previously to ensure that
all allocations which occur in the write path use GFP_NOIO.
However, there may be internal allocations performed in the
Linux slab which do not honor these flags. If this is the case
a deadlock may occur.
The path forward is definitely to start relying on the Linux slab.
But for that to happen we need to start building confidence that
there aren't any unexpected surprises lurking for us. And ideally
need to move completely away from using the SPLs slab for large
memory allocations. This patch is a first step.
NOTES:
1) The KMC_NOMAGAZINE flag was leveraged to support the Linux slab
backed caches but it is not supported for kmem/vmem backed caches.
2) Regardless of the spl_kmem_cache_*_limit settings a cache may
be explicitly set to a given type by passed the KMC_KMEM,
KMC_VMEM, or KMC_SLAB flags during cache creation.
3) The constructors, destructors, and reclaim callbacks are all
functional and will be called regardless of the cache type.
4) KMC_SLAB caches will not appear in /proc/spl/kmem/slab due to
the issues involved in presenting correct object accounting.
Instead they will appear in /proc/slabinfo under the same names.
5) Several kmem SPLAT tests needed to be fixed because they relied
incorrectly on internal kmem slab accounting. With the updated
test cases all the SPLAT tests pass as expected.
6) An autoconf test was added to ensure that the __GFP_COMP flag
was correctly added to the default flags used when allocating
a slab. This is required to ensure all pages in higher order
slabs are properly refcounted, see ae16ed9.
7) When using the SLUB allocator there is no need to attempt to
set the __GFP_COMP flag. This has been the default behavior
for the SLUB since Linux 2.6.25.
8) When using the SLUB it may be desirable to set the slub_nomerge
kernel parameter to prevent caches from being merged.
Original-patch-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#356
When using __get_free_pages to get high order memory, only the first page's
_count will set to 1, other's will be 0. When an internal page get passed into
rbd, it will eventully go into tcp_sendpage. There, it will be called with
get_page and put_page, and get freed erroneously when _count jump back to 0.
The solution to this problem is to use compound page. All pages in a
high order compound page share a single _count. So get_page and put_page in
tcp_sendpage will not cause _count jump to 0.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#251
This behavior is more consistent with the way memory reclaim
is expected to work under Linux.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#349
By default maximal number of objects in slab can't exceed (16*2 - 1) and slab
size can't exceed 32M.
Today's high end servers having couple hundreds of RAM available for ARC may
run into a trouble with virtual memory because of the restriction mentioned
above.
Problem:
Reasons for very high number of virtual memory allocations:
* Real slab size very small relative to the size of the entire RAM
* Slabs allocated on virtual memory and fill entire ARC
The result is very high number of allocated virtual memory ranges (hundreds of
ranges). When virtual memory subsystem manages high number of ranges its
performance become so poor that it freezes from time to time.
Solution:
Number of objects per slab should be increased taking into account maximal
slab size which can also be increased if needed.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#337
It was observed that spl_kmem_cache_alloc() uses local_irq_save()
and saves the interrupt state in a local variable. This would
normally be fine except that spl_kmem_cache_alloc() calls
spl_cache_refill() which re-enables interrupts. It is then
possible that while interrupts are enabled the process is
rescheduled to a different cpu before being disable again.
This could result in us restoring the saved interrupt state
from one cpu to another.
What the consequences of this are aren't perfectly clear, but
this is clearly a bug and it has the potential to cause issues.
The code has been updated to just use local_irq_enable() and
local_irq_disable() to avoid this.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The current code contains a race condition that triggers when bit 2 in
spl.spl_kmem_cache_expire is set, spl_kmem_cache_reap_now() is invoked
and another thread is concurrently accessing its magazine.
spl_kmem_cache_reap_now() currently invokes spl_cache_flush() on each
magazine in the same thread when bit 2 in spl.spl_kmem_cache_expire is
set. This is unsafe because there is one magazine per CPU and the
magazines are lockless, so it is impossible to guarentee that another
CPU is not using its magazine when this function is called.
The solution is to only touch the local CPU's magazine and leave other
CPU's magazines to other CPUs.
Reported-by: DHE
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#274
Because spl_slab_size() was always returning -ENOSPC for caches of
type KMC_OFFSLAB the cache could never be created. Additionally
the slab size is rounded up to a page which is what kv_alloc()
expects. The kv_alloc() code will minimally allocate a page,
in the KMC_OFFSLAB case this could be reduced.
The basic regression tests kmem:slab_small, kmem:slab_large,
and kmem:slab_align regression were updated to test KMC_OFFSLAB.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ying Zhu <casualfisher@gmail.com>
Closes#266
It has been observed that it's possible to get in a state where
shrink_slabs() will spin repeated invoking the generic kmem cache
shrinker. It fails to detect it's not making forward progress
reclaiming from the cache and doesn't give up. To ensure this
never occurs we unconditionally return -1 after reclaiming what
we can.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closeszfsonlinux/zfs#1276Closeszfsonlinux/zfs#1598Closeszfsonlinux/zfs#1432
Commit 5c7a036 correctly relocated the creation of a taskq
and the registraction of the kmem_cache_shrinker after the
initialization of the kmem tracking code. However, the
cleanup of these structures was not done before the leak
checks in spl_kmem_fini(). This resulted in an incorrect
'kmem leaked' warning even though there was no actual leak.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closeszfsonlinux/zfs#1569
This code has gotten something stale and no longer builds cleanly
against modern kernels. The two issues addressed here are as
follows:
* The hlist_*_rcu interfaces in the kernel have been relatively
unstable. Since this isn't performance critical code just use
the long standing hlist_* variants.
* In older kernels the hash_ptr() function takes a 'void *' but
in newer kernels it expects a 'const void *'. To silence the
compiler warnings about this explicitly cast it to a 'void *'.
The memset function is a similar case but it always expects
a 'void *'.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#256
Re-order initialization in spl_kmem_init to allow for kmem tracing
to work. The spl_kmem_init function calls taskq_create prior to
initializing the tracking (calling spl_kmem_init_tracking). Since
taskq_create uses kmem_alloc, NULL dereferences occur because the
global kmem_list hasn't had its next & prev pointers initialized yet.
This commit moves the calls to spl_kmem_init_tracking earlier in the
spl_kmem_init function in order that the subsequent kmem_alloc calls
(by taskq_create) work properly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#243
Calling cond_resched() after each object is freed and then after each
slab is freed can cause slabs of objects to live for excessive periods
of time following reclaimation. This interferes with the kernel's own
memory management when called from kswapd and can cause direct reclaim
to occur in response to memory pressure that should have been resolved.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
torvalds/linux@b67bfe0d42 changed
hlist_for_each_entry{,_rcu} to take 3 arguments instead of 4. We handle
this by switching to hlist_for_each{,_rcu}, which works across all
supported kernels.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Update links to refer to the official ZFS on Linux website instead of
@behlendorf's personal fork on github.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Cache aging was implemented because it was part of the default Solaris
kmem_cache behavior. The idea is that per-cpu objects which haven't been
accessed in several seconds should be returned to the cache. On the other
hand Linux slabs never move objects back to the slabs unless there is
memory pressure on the system.
This behavior is now configurable through the 'spl_kmem_cache_expire'
module option. The value is a bit mask with the following meaning.
0x1 - Solaris style cache aging eviction is enabled.
0x2 - Linux style low memory eviction is enabled.
Both methods may be safely enabled simultaneously, but by default
both are disabled. It has never been clear if the kmem cache aging
(which has been around from day one) actually does any good. It has
however been the source of numerous bugs so I wouldn't mind retiring
it entirely.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/zfs#1227
Closes#210
This functionality is no longer required by ZFS, see commit
zfsonlinux/zfs@7b3e34ba5a.
Since there are no other consumers, and because it adds
additional autoconf complexity which must be maintained
the spl_invalidate_inodes() function has been removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#795
Commit a10287e00d slightly reworked
the slab ageing code such that it is no longer dependent on the
Linux delayed work queue interfaces.
This was good for portability and performance, but it requires us
to use the on_each_cpu() function to execute the spl_magazine_age()
function. That means that the function is now executing in interrupt
context whereas before it was scheduled in normal process context.
And that means we need to be slightly more careful about the locking
in the interrupt handler.
With the reworked code it's possible that we'll be holding the
skc->skc_lock and be interrupted to handle the spl_magazine_age()
IRQ. This will result in a deadlock and soft lockup errors unless
we're careful to detect the contention and avoid taking the lock in
the interupt handler. So that's what this patch does.
Alternately, (and slightly more conventionally) we could have used
spin_lock_irqsave() to prevent this race entirely but I'd perfer to
avoid disabling interrupts as much as possible due to performance
concerns. There is absolutely no penalty for us not aging objects
out of the magazine due to contention.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Closeszfsonlinux/zfs#1193
Shift the asynchronous allocations over to use the taskq interfaces.
This allows us to abandon the kernels delayed work queue interface
and all the compatibility code it requires.
This code never actually used the delay functionality it was just
done this way to leverage the existing compatibility code. All that
is required is a thread context to perform the allocation in. The
only thing clever in this change is that we take advantage of the
preallocated task queue entries to avoid a memory allocation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Shift the cache and magazine ageing functionality over to the new
delayed taskq interfaces. This allows us to abandon the kernels
delayed work queue interface and all the compatibility code it
requires.
However, the delayed taskq interface does not allow us to schedule
a task for a specfic cpu so the ageing code was slightly reworked.
The magazine ageing delay has been directly linked to the cache
ageing function. The spl_cache_age() function invokes on_each_cpu()
in order to run spl_magazine_age() on each cpu. It then blocks
waiting for them to complete and promptly reclaims any free slabs.
When restructing the code wasn't the primary goal I think the
new code is far more understable and maintainable. It also should
help minimize magazine thrashing because free slabs are immediately
released after the magazine is aged.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When this code was originally written I went overboard and allowed
for the possibility of creating a cache in an atomic context. In
practice there are no callers which ever do this. This makes sense
since a cache is by design a long lived data structure.
To prevent abuse of this function going forward I'm removing the
code which is supported to handle an atomic context. All allocators
have been updated to use KM_SLEEP and the might_sleep() debug macro
has been added to immediately detect atomic callers.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Allowing the spl_cache_grow_work() function to reclaim inodes
allows for two unlikely deadlocks. Therefore, we clear __GFP_FS
for these allocations. The two deadlocks are:
* While holding the ZFS_OBJ_HOLD_ENTER(zsb, obj1) lock a function
calls kmem_cache_alloc() which happens to need to allocate a
new slab. To allocate the new slab we enter FS level reclaim
and attempt to evict several inodes. To evict these inodes we
need to take the ZFS_OBJ_HOLD_ENTER(zsb, obj2) lock and it
just happens that obj1 and obj2 use the same hashed lock.
* Similar to the first case however instead of getting blocked
on the hash lock we block in txg_wait_open() which is waiting
for the next txg which isn't coming because the txg_sync
thread is blocked in kmem_cache_alloc().
Note this isn't a 100% fix because vmalloc() won't strictly
honor __GFP_FS. However, it practice this is sufficient because
several very unlikely things must all occur concurrently.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue zfsonlinux/zfs#1101
If we are reaping from the cache and a concurrent allocation
occurs then the caller must block until the reaping is complete.
This is signaled by the clearing of the KMC_BIT_REAPING bit.
Otherwise the caller will be in a tight loop which takes and
releases the skc->skc_cache lock. When there are multiple
concurrent callers the system will thrash on the lock and
appear to lock up.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Because only virtual slabs may have emergency objects and these
objects are guaranteed to have physical addresses. It can be
easily determined if the passed object is a virtual slab object
or an emergency object. This allows us to completely optimize
the emergency object free case out of the common free path.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In the initial implementation emergency objects were tracked on a
per-cache list. The assumption was that under normal operation we
would never allocate more than a handful of these objects. So the
cost of walking the list during free was expected to be negligible.
However real world usage has shown that emergency objects tend to
be allocated in batches. A deadlock will be detected and several
thousand emergency objects will be allocated before the original
blocked slab allocation can complete.
Therefore the original list has been replaced by a red black tree
which is sorted by the memory address of each allocated object.
This bounds the worst case insertion and removal time to O(log n)
which minimize contention on the assoicated spin lock.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The entire goal of performing the slab allocations asynchronously
is to be able to detect when a vmalloc() deadlocks. In this case,
and only this case, do we want to start allocating emergency objects.
The trick here is to minimize false positives because the overhead
of tracking emergency objects is far higher than normal slab objects.
With that goal in mind the code was reworked to be less sensitive
to slow allocations by increasing the wait time. Once a cache is
is marked deadlocked all subsequent allocations which can not be
satisfied with existing cache objects will immediately allocate new
emergency objects. This behavior persists until the asynchronous
allocation completes and clears the deadlocked flag.
The result of these tweaks is that far fewer emergency objects
get created which is important because this minimizes the cost of
releasing them latter in kmem_cache_free().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Provide a flag to disable the use of emergency objects for a
specific kmem cache. There may be instances where under no
circumstances should you kmalloc() an emergency object. For
example, when you cache contains very large objects (>128k).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit 2092cf68d8. The
use of the PF_MEMALLOC flag was always a hack to work around memory
reclaim deadlocks. Those issues are believed to be resolved so this
workaround can be safely reverted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit b8b6e4c453. The
use of the PF_MEMALLOC flag was always a hack to work around memory
reclaim deadlocks. Those issues are believed to be resolved so this
workaround can be safely reverted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit 36811b4430.
Which is no longer required because there is now SPL code in
place to safely handle the deadlocks the kernel patch was designed
to address. Therefore we can unconditionally use vmalloc() and
drop all the PF_MEMALLOC code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This patch is designed to resolve a deadlock which can occur with
__vmalloc() based slabs. The issue is that the Linux kernel does
not honor the flags passed to __vmalloc(). This makes it unsafe
to use in a writeback context. Unfortunately, this is a use case
ZFS depends on for correct operation.
Fixing this issue in the upstream kernel was pursued and patches
are available which resolve the issue.
https://bugs.gentoo.org/show_bug.cgi?id=416685
However, these changes were rejected because upstream felt that
using __vmalloc() in the context of writeback should never be done.
Their solution was for us to rewrite parts of ZFS to accomidate
the Linux VM.
While that is probably the right long term solution, and it is
something we want to pursue, it is not a trivial task and will
likely destabilize the existing code. This work has been planned
for the 0.7.0 release but in the meanwhile we want to improve the
SPL slab implementation to accomidate this expected ZFS usage.
This is accomplished by performing the __vmalloc() asynchronously
in the context of a work queue. This doesn't prevent the posibility
of the worker thread from deadlocking. However, the caller can now
safely block on a wait queue for the slab allocation to complete.
Normally this will occur in a reasonable amount of time and the
caller will be woken up when the new slab is available,. The objects
will then get cached in the per-cpu magazines and everything will
proceed as usual.
However, if the __vmalloc() deadlocks for the reasons described
above, or is just very slow, then the callers on the wait queues
will timeout out. When this rare situation occurs they will attempt
to kmalloc() a single minimally sized object using the GFP_NOIO flags.
This allocation will not deadlock because kmalloc() will honor the
passed flags and the caller will be able to make forward progress.
As long as forward progress can be maintained then even if the
worker thread is deadlocked the critical thread will make progress.
This will eventually allow the deadlocked worker thread to complete
and normal operation will resume.
These emergency allocations will likely be slow since they require
contiguous pages. However, their use should be rare so the impact
is expected to be minimal. If that turns out not to be the case in
practice further optimizations are possible.
One additional concern is if these emergency objects are long lived.
Right now they are simply tracked on a list which must be walked when
an object is freed. Is they accumulate on a system and the list
grows freeing objects will become more expensive. This could be
handled relatively easily by using a hash instead of a list, but that
optimization (if needed) is left for a follow up patch.
Additionally, these emeregency objects could be repacked in to existing
slabs as objects are freed if the kmem_cache_set_move() functionality
was implemented. See issue https://github.com/zfsonlinux/spl/issues/26
for full details. This work would also help reduce ZFS's memory
fragmentation problems.
The /proc/spl/kmem/slab file has had two new columns added at the
end. The 'emerg' column reports the current number of these emergency
objects in use for the cache, and the following 'max' column shows
the historical worst case. These value should give us a good idea
of how often these objects are needed. Based on these values under
real use cases we can tune the default behavior.
Lastly, as a side benefit using a single work queue for the slab
allocations should reduce cpu contention on the global virtual address
space lock. This should manifest itself as reduced cpu usage for
the system.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The spl_magazine_age function had the implied assumption that it will
remain on its current cpu through its execution. In order to support
preempt enabled kernels, this assumption had to be removed.
The spl_kmem_magazine structure now holds the cpu id of the cpu it is
local to. This allows spl_magazine_age to use this field when scheduling
work to be done by the magazine's local cpu.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #98
A preprocessor definition renders this harmless. However, it is a good
idea to change this to be consistent.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
zfsonlinux/spl@2092cf68d8 used
PF_MEMALLOC to workaround a bug in the Linux kernel where
allocations did not honor the gfp flags passed to vmalloc().
Unfortunately, PF_MEMALLOC has the side effect of permitting
allocations to allocate pages outside of ZONE_NORMAL. This
has been observed to result in the depletion of ZONE_DMA32.
A kernel patch is available in the Gentoo bug tracker for
this issue.
https://bugs.gentoo.org/show_bug.cgi?id=416685
This negates any benefit PF_MEMALLOC provides, so we introduce
an autotools check to disable the use of PF_MEMALLOC on
systems with patched kernels.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#126
This prevents warnings in ZFS that were caused by changes necessary to
support PaX patched kernels. When debugging is enabled, these warnings
become build failures.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#131
To minimize the chance of triggering an OOM during direct reclaim.
The kmem caches have been improved to make a best effort to reclaim
at least one slab when a reclaim function is registered. This helps
avoid the case where objects are released but they are spread over
multiple slabs so no memory gets reclaimed.
Care has been taken to avoid deadlocking if the reclaim function
is unable to make forward progress. Additionally, the reclaim
function may be skipped entirely if there are already free slabs
which can be safely reaped.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#107
The Linux direct reclaim path uses this out of band value to
determine if forward progress is being made. Normally this is
incremented by kmem_freepages() which is part of the various
Linux slab implementations. However, since we are using none
of that infrastructure we're responsible for incrementing this
count.
If no forward progress is detected and a subsequent allocation
fails the OOM killer will be invoked. If there was forward
progress additional reclaim will be attempted via the page
cache and registerd shrinker until the allocation succeeds.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#107
When memory pressure triggers direct memory reclaim, a slabs age
and delay should not prevent it from being freed. This patch ensures
these values are ignored, allowing an empty slab to be freed in this
code path no matter the value of its age and delay.
This prevents needless scanning of the partial slabs and has been
observed to significantly reduce the total cpu usage. In addition,
it should allow for snappier reclaim under memory pressure.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#102
Previously, the SPL tried to maintain Solaris semantics by freeing
all available (empty) slabs from its slab caches when the shrinker
was called. This is not desirable when running on Linux. To make
the SPL shrinker more Linux friendly, the actual number of freed
slabs from each of the slab caches is now derived from nr_to_scan
and skc_slab_objs.
Additionally, an accounting bug was fixed in spl_slab_reclaim()
which could cause us to reclaim one more slab than requested.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#101
Until now the notion of an internal debug logging infrastructure
was conflated with enabling ASSERT()s. This patch clarifies things
by cleanly breaking the two subsystem apart. The result of this
is the following behavior.
--enable-debug - Enable/disable code wrapped in ASSERT()s.
--disable-debug ASSERT()s are used to check invariants and
are never required for correct operation.
They are disabled by default because they
may impact performance.
--enable-debug-log - Enable/disable the debug log infrastructure.
--disable-debug-log This infrastructure allows the spl code and
its consumer to log messages to an in-kernel
log. The granularity of the logging can be
controlled by a debug mask. By default the
mask disables most debug messages resulting
in a negligible performance impact. Because
of this the debug log is enabled by default.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The Proxmox VE kernel contains a patch which renames the function
invalidate_inodes() to invalidate_inodes_check(). In the process
it adds a 'check' argument and a '#define invalidate_inodes(x)'
compatibility wrapper for legacy callers. Therefore, if either
of these functions are exported invalidate_inodes() can be
safely used.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#58
As of Linux 3.1 the shrink_dcache_memory and shrink_icache_memory
functions have been removed. This same task is now accomplished
more cleanly with per super block shrinkers. This unfortunately
leaves us no easy way to support the dnlc_reduce_cache() function.
This support has always been entirely optional. So when no
reasonable interface is available allow the dnlc_reduce_cache()
function to effectively become a no-op.
The downside of this change is that it will prevent the zfs arc
meta data limts from being enforced. However, the current zfs
implementation in this regard is already flawed and needs to
be reworked. If the arc needs to enfore a meta data limit it
will need to be extended to coordinate directly with the zpl.
This will allow us to drop all this compatibility code and get
more fine grained control over the cache management.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #52
Be careful not to unconditionally clear the PF_MEMALLOC bit in
the task structure. It may have already been set when entering
kv_alloc() in which case it must remain set on exit. In
particular the kswapd thread will have PF_MEMALLOC set in
order to prevent it from entering direct reclaim. By clearing
it we allow the following NULL deref to potentially occur.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8109c7ab>] balance_pgdat+0x25b/0x4ff
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes ZFS issue #287
The typo did not have any effect (apart from a negligible performance
impact) because skc->skc_flags * KMC_OFFSLAB is always non-null when
at least one bit in skc->skc_flags is set.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In a non-debug build the ASSERT() would be optimized away
which could cause pending work items to not be cancelled.
We must also use cancel_delayed_work_sync() rather than just
cancel_delayed_work() to actually wait until work items have
completed. Otherwise they might accidentally access free'd
memory.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes ZFS bugs #279, #62, #363, #418
Update the the wrapper macros for the memory shrinker to handle
this 4th API change. The callback function now takes a
shrink_control structure. This is certainly a step in the
right direction but it's annoying to have to accomidate yet
another version of the API.
To resolve a potiential filesystem corruption issue a second
argument was added to invalidate_inodes(). This argument controls
whether dirty inodes are dropped or treated as busy when invalidating
a super block. When only the legacy API is available the second
argument will be dropped for compatibility.
Provide the dnlc_reduce_cache() function which attempts to prune
cached entries from the dcache and icache. After the entries are
pruned any slabs which they may have been using are reaped.
Note the API takes a reclaim percentage but we don't have easy
access to the total number of cache entries to calculate the
reclaim count. However, in practice this doesn't need to be
exactly correct. We simply need to reclaim some useful fraction
(but not all) of the cache. The caller can determine if more
needs to be done.
The Linux shrinker has gone through three API changes since 2.6.22.
Rather than force every caller to understand all three APIs this
change consolidates the compatibility code in to the mm-compat.h
header. The caller then can then use a single spl provided
shrinker API which does the right thing for your kernel.
SPL_SHRINKER_CALLBACK_PROTO(shrinker_callback, cb, nr_to_scan, gfp_mask);
SPL_SHRINKER_DECLARE(shrinker_struct, shrinker_callback, seeks);
spl_register_shrinker(&shrinker_struct);
spl_unregister_shrinker(&&shrinker_struct);
spl_exec_shrinker(&shrinker_struct, nr_to_scan, gfp_mask);
