All fprintf() error messages are moved out of the libzfs_init()
library function where they never belonged in the first place. A
libzfs_error_init() function is added to provide useful error
messages for the most common causes of failure.
Additionally, in libzfs_run_process() the 'rc' variable was renamed
to 'error' for consistency with the rest of the code base.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
While module loading itself is synchronous the creation of the /dev/zfs
device is not. This is because /dev/zfs is typically created by a udev
rule after the module is registered and presented to user space through
sysfs. This small window between module loading and device creation
can result in spurious failures of libzfs_init().
This patch closes that race by extending libzfs_init() so it can detect
that the modules are loaded and only if required wait for the /dev/zfs
device to be created. This allows scripts to reliably use the following
shell construct without the need for additional error handling.
$ /sbin/modprobe zfs && /sbin/zpool import -a
To minimize the potential time waiting in libzfs_init() a strategy
similar to adaptive mutexes is employed. The function will busy-wait
for up to 10ms based on the expectation that the modules were just
loaded and therefore the /dev/zfs will be created imminently. If it
takes longer than this it will fall back to polling for up to 10 seconds.
This behavior can be customized to some degree by setting the following
new environment variables. This functionality is provided for backwards
compatibility with existing scripts which depend on the module auto-load
behavior. By default module auto-loading is now disabled.
* ZFS_MODULE_LOADING="YES|yes|ON|on" - Attempt to load modules.
* ZFS_MODULE_TIMEOUT="<seconds>" - Seconds to wait for /dev/zfs
The zfs-import-* systemd service files have been updated to call
'/sbin/modprobe zfs' so they no longer rely on the legacy auto-loading
behavior.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#2556
If the command "shellcheck" exists, then find all shell scripts and
run shellcheck on them.
* Use 'gcc' format with shellcheck.
* Exclude zfs-script-config.sh (which isn't really a script).
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3428
Prefixing an octal value with a leading zero is the standard way
to disambiguate it. This change only impacts the `zfs diff` output
and is therefore very limited in scope.
Signed-off-by: Hajo M<C3><B6>ller <dasjoe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3417
Commit 60e9f69 added the --with-mounthelperdir option for Gentoo
and in the process accidentally modified the default installation
location. For security reasons mount(8) expects it to only be
installed under /sbin.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3426
The dbu_evict_taskq added in 0c66c32d is only invoked via
taskq_dispatch_ent(). In these cases, ZoL's implementation of taskqs
requires the entries to be initialized first with taskq_init_ent() in
order that, among other things, the embedded spinlock is initialized
properly.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3419
5243 zdb -b could be much faster
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5243https://github.com/illumos/illumos-gate/commit/f7950bf
Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3414
If the pool/dataset command-line argument is specified with a trailing
slash, for example, "tank/", it is interpreted as the root dataset.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3415
There seems to be a annoying problem using NFSv4 to access ZFS
file systems under certain circumstances. It's easily reproduced:
nfs_client1: mount server:/export /mnt
nfs_client1: cd /mnt
nfs_client1: echo foo >junk
nfs_client1: cat junk
foo
Now on a different NFSv4 client:
nfs_client2: mount server:/export /mnt
nfs_client2: cd /mnt
nfs_client2: vi junk
# Make some changes to /mnt/junk and save
# This change the inode associated with /mnt/junk
Now back to the original client:
nfs_client1: cat junk
cat: junk: No such file or directory
Admittedly NFSv4 is not advertised as a cluster file system that
maintains a completely coherent view of data across multiple nodes.
But it does have some mechanisms built in that try to deal with
situations like the above. Namely, it employs specialized file
handle lookup routines that return ESTALE when a file handle contains
a non-existant inode value. The ESTALE return triggers a return
full file path lookup from the client to determine if the file has
actually gone away or if the cached file handle is no longer valid.
ZFS behavior can be brought into line with other file systems
(e.g., ext4) by applying the following patch:
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3224
Per the documentation for dnode_next_offset in dnode.c, the "txg"
parameter specifies a lower bound on which transaction the dnode can
be found in. We are interested in all dnodes that are removed between
the first and last transaction in the snapshot. It doesn't need to be
created in that snapshot to correspond to a removed file.
In fact, the behavior of zfs diff in the test case exactly matches
this: the transaction that created the data that was deleted in snapshot
"2" was produced before, in snapshot "1", definitely predating the first
transaction in snapshot "2".
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <Tim Chase <tim@onlight.com>
Closes#2081
When ASSERTs are compiled out by using the --disable-debug configure
option. Then the local variable 'dsl_pool_t *dp' will be unused and
generate a compiler warning. Since this variable is only used once
in the ASSERT replace it with 'ds->ds_dir->dd_pool'.
This has the additional advantage of potentially saving a few bytes
on the stack depending on how gcc decides to compile the function.
This issue was not noticed immediately because the automated builders
use --enable-debug to make the testing as rigorous as possible.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Closes#3410
5765 add support for estimating send stream size with lzc_send_space when source is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
References:
https://www.illumos.org/issues/5765https://github.com/illumos/illumos-gate/commit/643da460
Porting notes:
* Unused variable 'recordsize' in dmu_send_estimate() dropped
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3397
5810 zdb should print details of bpobj
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5810https://github.com/illumos/illumos-gate/commit/732885fc
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3387
5351 scrub goes for an extra second each txg
5352 scrub should pause when there is some dirty data
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5351https://github.com/illumos/illumos-gate/commit/6f6a76a
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3383
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5350https://github.com/illumos/illumos-gate/commit/e651831
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3382
Author: Alex Reece <alex@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5422https://github.com/illumos/illumos-gate/commit/a846f19
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3381
Commit f4af6bb783 which added support
for REQ_FAILFAST_MASK but the new autoconf test didn't use the same
preprocessor macro name as the code did.
The effect is that FAILFAST mode has not been enabled for ZoL in any
post-2.6.35 kernel.
Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels.
Raise an error condition if the FAILFAST interface can't be detected.
Signed-off-by: Tim Chase <tim@onlight.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3386
This commit updates the copyright boilerplate within the ZED subtree.
The instructions for appending a contributor copyright line have
been removed. Manually maintaining copyright notices in this
manner is error-prone, imprecise at a file-scope granularity, and
oftentimes inaccurate. These lines can become a pernicious source of
merge conflicts. A commit log is better suited to maintaining this
information. Consequently, a line has been added to the boilerplate
to refer to the git commit log for authoritative copyright attribution.
To account for the scenario where a file may become separated from
the codebase and commit history (i.e., it is copied somewhere else),
a line has been added to identify the file's origin.
http://softwarefreedom.org/resources/2012/ManagingCopyrightInformation.html
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3384
The security and ACL operations should all be performed atomically.
To accomplish this there would need to significant invasive changes
made to the common code base. For the moment it's desirable for
compatibility reasons to avoid this. Therefore the code has been
updated to attempt to unwind the operation in case of failure
rather than panic.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2445
Improve the large block feature test coverage by extending ztest
to frequently change the recordsize. This is specificially designed
to catch corner cases which might otherwise go unnoticed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #354
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5027https://github.com/illumos/illumos-gate/commit/b515258
Porting Notes:
* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.
* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes. Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.
* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize. This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.
* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX. This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M.
* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space. We should be able to relax
this one the ABD patches are merged.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#354
The umem_alloc_aligned() function should not assume that a 'void *'
type is 64-bit. It will not be on 32-bit platforms. Rather than
complicating the ASSERT to handle this it is simply removed.
Additionally, the '%lu' format specifier should not be assumed to
imply a 64-bit value. Fix this by using the 'llu' format specifier
which will always be atleast 64-bit and explicitly casing the
variable to an u_longlong_t. This issue is handled the same way
in many other parts of the code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The metaslab_min_alloc_size option is no longer used in the code.
This functionality was removed by commit f3a7f66 and the module
options should have been dropped at that time.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
With debugging enabled and depending on your kernel config, the size of
arc_buf_hdr_t can blow out the stack of arc_evict() and arc_evict_ghost()
to greater than 1024 bytes. Let's avoid this.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3377
5349 verify that block pointer is plausible before reading
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Xin Li <delphij@FreeBSD.org>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5349https://github.com/illumos/illumos-gate/commit/f63ab3d5
Porting notes:
* Several variable declarations were moved due to C style needs
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3373
By the time we're tearing down our superblock the VFS has started releasing
all our inodes/znodes. Some of this work may have been handed off to our
iput taskq so we need to wait for that work to complete. However the iput
from the taskq can itself result in additional work being added to the
taskq:
dsl_pool_iput_taskq
iput
iput_final
evict
destroy_inode
zpl_inode_destroy
zfs_inode_destroy
zfs_iput_async(ZTOI(zp->z_xattr_parent))
taskq_dispatch(dsl_pool_iput_taskq..., iput, ...)
Let's wait until all our znodes have been released.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3281
5348 zio_checksum_error() only fills in info if ECKSUM
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5348https://github.com/illumos/illumos-gate/commit/373dc1cf
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3372
5808 spa_check_logs is not necessary on readonly pools
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5808https://github.com/illumos/illumos-gate/commit/23367a2f
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3369
5814 bpobj_iterate_impl(): Close a refcount leak iterating on a sublist.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5814https://github.com/illumos/illumos-gate/commit/b67dde11
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3368
Support exporting all imported pools in one go, using 'zpool export -a'.
This is accomplished by moving the export parts from zpool_do_export()
in to the new function zpool_export_one(). The for_each_pool() function
is used to enumerate the list of pools to be exported. Passing an argc
of 0 implies the function should be called on all pools.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #3203
4951 ZFS administrative commands should use reserved space, not with ENOSPC
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/4373https://github.com/illumos/illumos-gate/commit/7d46dc6
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
3654 zdb should print number of ganged blocks
3656 remove unused function zap_cursor_move_to_key()
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/3654https://www.illumos.org/issues/3656https://github.com/illumos/illumos-gate/commit/d5ee8a1
Porting Notes:
3655 and 3657 were part of this commit but those hunks were dropped
since they apply to mdb.
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
It's been reported that threads would loop infinitely inside zfs_zget. The
speculated cause for this is that if an inode is marked for evict, zfs_zget
would see that and loop. However, if the looping thread doesn't yield, the
inode may not have a chance to finish evict, thus causing a infinite loop.
This patch solve this issue by add cond_resched to zfs_zget, making the
looping thread to yield when needed.
Tested-by: jlavoy <jalavoy@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3349
5244 zio pipeline callers should explicitly invoke next stage
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5244https://github.com/illumos/illumos-gate/commit/738f37b
Porting Notes:
1. The unported "2932 support crash dumps to raidz, etc. pools"
caused a merge conflict due to a copyright difference in
module/zfs/vdev_raidz.c.
2. The unported "4128 disks in zpools never go away when pulled"
and additional Linux-specific changes caused merge conflicts in
module/zfs/vdev_disk.c.
Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2828
5812 assertion failed in zrl_tryenter(): zr_owner==NULL
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5812https://github.com/illumos/illumos-gate/commit/8df1730
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3357
5592 NULL pointer dereference in dsl_prop_notify_all_cb()
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5592https://github.com/illumos/illumos-gate/commit/9d47dec
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5531 NULL pointer dereference in dsl_prop_get_ds()
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5531https://github.com/illumos/illumos-gate/commit/e57a022
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5056 ZFS deadlock on db_mtx and dn_holds
Author: Justin Gibbs <justing@spectralogic.com>
Reviewed by: Will Andrews <willa@spectralogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5056https://github.com/illumos/illumos-gate/commit/bc9014e
Porting Notes:
sa_handle_get_from_db():
- the original patch includes an otherwise unmentioned fix for a
possible usage of an uninitialised variable
dmu_objset_open_impl():
- Under Illumos list_link_init() is the same as filling a list_node_t
with NULLs, so they don't notice if they miss doing list_link_init()
on a zero'd containing structure (e.g. allocated with kmem_zalloc as
here). Under Linux, not so much: an uninitialised list_node_t goes
"Boom!" some time later when it's used or destroyed.
dmu_objset_evict_dbufs():
- reduce stack usage using kmem_alloc()
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5095 panic when adding a duplicate dbuf to dn_dbufs
Author: Alex Reece <alex@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Mattew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Josef Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5095https://github.com/illumos/illumos-gate/commit/86bb58a
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
