6844 dnode_next_offset can detect fictional holes
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
dnode_next_offset is used in a variety of places to iterate over the
holes or allocated blocks in a dnode. It operates under the premise that
it can iterate over the blockpointers of a dnode in open context while
holding only the dn_struct_rwlock as reader. Unfortunately, this premise
does not hold.
When we create the zio for a dbuf, we pass in the actual block pointer
in the indirect block above that dbuf. When we later zero the bp in
zio_write_compress, we are directly modifying the bp. The state of the
bp is now inconsistent from the perspective of dnode_next_offset: the bp
will appear to be a hole until zio_dva_allocate finally finishes filling
it in. In the meantime, dnode_next_offset can detect a hole in the dnode
when none exists.
I was able to experimentally demonstrate this behavior with the
following setup:
1. Create a file with 1 million dbufs.
2. Create a thread that randomly dirties L2 blocks by writing to the
first L0 block under them.
3. Observe dnode_next_offset, waiting for it to skip over a hole in the
middle of a file.
4. Do dnode_next_offset in a loop until we skip over such a non-existent
hole.
The fix is to ensure that it is valid to iterate over the indirect
blocks in a dnode while holding the dn_struct_rwlock by passing the zio
a copy of the BP and updating the actual BP in dbuf_write_ready while
holding the lock.
References:
https://www.illumos.org/issues/6844https://github.com/openzfs/openzfs/pull/82
DLPX-35372
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4548
In order to remove the HAVE_PN_UTILS wrappers the pn_alloc() and
pn_free() functions must be implemented. The existing illumos
implementation were used for this purpose.
The `flags` argument which was used in places wrapped by the
HAVE_PN_UTILS condition has beed added back to zfs_remove() and
zfs_link() functions. This removes a small point of divergence
between the ZoL code and upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4522
Also enable lazytime in mount.zfs
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
The problem for atime:
We have 3 places for atime: inode->i_atime, znode->z_atime and SA. And its
handling is a mess. A huge part of mess regarding atime comes from
zfs_tstamp_update_setup, zfs_inode_update, and zfs_getattr, which behave
inconsistently with those three values.
zfs_tstamp_update_setup clears z_atime_dirty unconditionally as long as you
don't pass ATTR_ATIME. Which means every write(2) operation which only updates
ctime and mtime will cause atime changes to not be written to disk.
Also zfs_inode_update from write(2) will replace inode->i_atime with what's
inside SA(stale). But doesn't touch z_atime. So after read(2) and write(2).
You'll have i_atime(stale), z_atime(new), SA(stale) and z_atime_dirty=0.
Now, if you do stat(2), zfs_getattr will actually replace i_atime with what's
inside, z_atime. So you will have now you'll have i_atime(new), z_atime(new),
SA(stale) and z_atime_dirty=0. These will all gone after umount. And you'll
leave with a stale atime.
The problem for relatime:
We do have a relatime config inside ZFS dataset, but how it should interact
with the mount flag MS_RELATIME is not well defined. It seems it wanted
relatime mount option to override the dataset config by showing it as
temporary in `zfs get`. But at the same time, `zfs set relatime=on|off` would
also seems to want to override the mount option. Not to mention that
MS_RELATIME flag is actually never passed into ZFS, so it never really worked.
How Linux handles atime:
The Linux kernel actually handles atime completely in VFS, except for writing
it to disk. So if we remove the atime handling in ZFS, things would just work,
no matter it's strictatime, relatime, noatime, or even O_NOATIME. And whenever
VFS updates the i_atime, it will notify the underlying filesystem via
sb->dirty_inode().
And also there's one thing to note about atime flags like MS_RELATIME and
other flags like MS_NODEV, etc. They are mount point flags rather than
filesystem(sb) flags. Since native linux filesystem can be mounted at multiple
places at the same time, they can all have different atime settings. So these
flags are never passed down to filesystem drivers.
What this patch tries to do:
We remove znode->z_atime, since we won't gain anything from it. We remove most
of the atime handling and leave it to VFS. The only thing we do with atime is
to write it when dirty_inode() or setattr() is called. We also add
file_accessed() in zpl_read() since it's not provided in vfs_read().
After this patch, only the MS_RELATIME flag will have effect. The setting in
dataset won't do anything. We will make zfstuil to mount ZFS with MS_RELATIME
set according to the setting in dataset in future patch.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
This is foundational work for ZED.
Updates a leaf vdev's persistent device strings on Linux platform
* only applies for a dedicated leaf vdev (aka whole disk)
* updated during pool create|add|attach|import
* used for matching device matching during auto-{online,expand,replace}
* stored in a leaf disk config label (i.e. alongside 'path' NVP)
* can opt-out using env var ZFS_VDEV_DEVID_OPT_OUT=YES
Some examples:
path: '/dev/sdb1'
devid: 'scsi-350000394a8ca4fbc-part1'
phys_path: 'pci-0000:04:00.0-sas-0x50000394a8ca4fbf-lun-0'
path: '/dev/mapper/mpatha'
devid: 'dm-uuid-mpath-35000c5006304de3f'
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2856Closes#3978Closes#4416
Effectively provide our own version of assert()/verify() for use
in user space. This minimizes our dependencies and aligns the
user space assertion handling with what's used in the kernel.
Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4449
When compiling with musl libc the return type will be incorrect.
Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4454
This is initial support for x86 vectorized implementations of ZFS parity
and checksum algorithms.
For the compilation phase, configure step checks if toolchain supports relevant
instruction sets. Each implementation must ensure that the code is not passed
to compiler if relevant instruction set is not supported. For this purpose,
following new defines are provided if instruction set is supported:
- HAVE_SSE,
- HAVE_SSE2,
- HAVE_SSE3,
- HAVE_SSSE3,
- HAVE_SSE4_1,
- HAVE_SSE4_2,
- HAVE_AVX,
- HAVE_AVX2.
For detecting if an instruction set can be used in runtime, following functions
are provided in (include/linux/simd_x86.h):
- zfs_sse_available()
- zfs_sse2_available()
- zfs_sse3_available()
- zfs_ssse3_available()
- zfs_sse4_1_available()
- zfs_sse4_2_available()
- zfs_avx_available()
- zfs_avx2_available()
- zfs_bmi1_available()
- zfs_bmi2_available()
These function should be called once, on module load, or initialization.
They are safe to use from user and kernel space.
If an implementation is using more than single instruction set, both compiler
and runtime support for all relevant instruction sets should be checked.
Kernel fpu methods:
- kfpu_begin()
- kfpu_end()
Use __get_cpuid_max and __cpuid_count from <cpuid.h>
Both gcc and clang have support for these. They also handle ebx register
in case it is used for PIC code.
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4381
Add the ZFS Test Suite and test-runner framework from illumos.
This is a continuation of the work done by Turbo Fredriksson to
port the ZFS Test Suite to Linux. While this work was originally
conceived as a stand alone project integrating it directly with
the ZoL source tree has several advantages:
* Allows the ZFS Test Suite to be packaged in zfs-test package.
* Facilitates easy integration with the CI testing.
* Users can locally run the ZFS Test Suite to validate ZFS.
This testing should ONLY be done on a dedicated test system
because the ZFS Test Suite in its current form is destructive.
* Allows the ZFS Test Suite to be run directly in the ZoL source
tree enabled developers to iterate quickly during development.
* Developers can easily add/modify tests in the framework as
features are added or functionality is changed. The tests
will then always be in sync with the implementation.
Full documentation for how to run the ZFS Test Suite is available
in the tests/README.md file.
Warning: This test suite is designed to be run on a dedicated test
system. It will make modifications to the system including, but
not limited to, the following.
* Adding new users
* Adding new groups
* Modifying the following /proc files:
* /proc/sys/kernel/core_pattern
* /proc/sys/kernel/core_uses_pid
* Creating directories under /
Notes:
* Not all of the test cases are expected to pass and by default
these test cases are disabled. The failures are primarily due
to assumption made for illumos which are invalid under Linux.
* When updating these test cases it should be done in as generic
a way as possible so the patch can be submitted back upstream.
Most existing library functions have been updated to be Linux
aware, and the following functions and variables have been added.
* Functions:
* is_linux - Used to wrap a Linux specific section.
* block_device_wait - Waits for block devices to be added to /dev/.
* Variables: Linux Illumos
* ZVOL_DEVDIR "/dev/zvol" "/dev/zvol/dsk"
* ZVOL_RDEVDIR "/dev/zvol" "/dev/zvol/rdsk"
* DEV_DSKDIR "/dev" "/dev/dsk"
* DEV_RDSKDIR "/dev" "/dev/rdsk"
* NEWFS_DEFAULT_FS "ext2" "ufs"
* Many of the disabled test cases fail because 'zfs/zpool destroy'
returns EBUSY. This is largely causes by the asynchronous nature
of device handling on Linux and is expected, the impacted test
cases will need to be updated to handle this.
* There are several test cases which have been disabled because
they can trigger a deadlock. A primary example of this is to
recursively create zpools within zpools. These tests have been
disabled until the root issue can be addressed.
* Illumos specific utilities such as (mkfile) should be added to
the tests/zfs-tests/cmd/ directory. Custom programs required by
the test scripts can also be added here.
* SELinux should be either is permissive mode or disabled when
running the tests. The test cases should be updated to conform
to a standard policy.
* Redundant test functionality has been removed (zfault.sh).
* Existing test scripts (zconfig.sh) should be migrated to use
the framework for consistency and ease of testing.
* The DISKS environment variable currently only supports loopback
devices because of how the ZFS Test Suite expects partitions to
be named (p1, p2, etc). Support must be added to generate the
correct partition name based on the device location and name.
* The ZFS Test Suite is part of the illumos code base at:
https://github.com/illumos/illumos-gate/tree/master/usr/src/test
Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes#6Closes#1534
zfsonlinux issue #2217 - zvol minor operations: check snapdev
property before traversing snapshots of a dataset
zfsonlinux issue #3681 - lock order inversion between zvol_open()
and dsl_pool_sync()...zvol_rename_minors()
Create a per-pool zvol taskq for asynchronous zvol tasks.
There are a few key design decisions to be aware of.
* Each taskq must be single threaded to ensure tasks are always
processed in the order in which they were dispatched.
* There is a taskq per-pool in order to keep the pools independent.
This way if one pool is suspended it will not impact another.
* The preferred location to dispatch a zvol minor task is a sync
task. In this context there is easy access to the spa_t and
minimal error handling is required because the sync task must
succeed.
Support for asynchronous zvol minor operations address issue #3681.
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2217Closes#3678Closes#3681
Added by-partlabel and by-partuuid to the default device search
path. Made made device names in by-label more preferable.
Signed-off-by: Thijs Cramer <thijs.cramer@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3892
Historically libblkid support was detected as part of configure
and optionally enabled. This was done because at the time support
for detecting ZFS pool vdevs had just be added to libblkid and
those updated packages were not yet part of many distributions.
This is no longer the case and any reasonably current distribution
will ship a version of libblkid which can detect ZFS pool vdevs.
This patch makes libblkid mandatory at build time and libblkid
the preferred method of scanning for ZFS pools. For distributions
which include a modern version of libblkid there is no change in
behavior. Explicitly scanning the default search paths is still
supported and can be enabled with the '-s' command line option.
Additionally making libblkid mandatory means that the 'zpool create'
command can reliably detect if a specified device has an existing
non-ZFS filesystem (ext4, xfs) and print a warning.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2448
The existing algorithm selects a preferred leaf vdev based on offset of the zio
request modulo the number of members in the mirror. It assumes the devices are
of equal performance and that spreading the requests randomly over both drives
will be sufficient to saturate them. In practice this results in the leaf vdevs
being under utilized.
The new algorithm takes into the following additional factors:
* Load of the vdevs (number outstanding I/O requests)
* The locality of last queued I/O vs the new I/O request.
Within the locality calculation additional knowledge about the underlying vdev
is considered such as; is the device backing the vdev a rotating media device.
This results in performance increases across the board as well as significant
increases for predominantly streaming loads and for configurations which don't
have evenly performing devices.
The following are results from a setup with 3 Way Mirror with 2 x HD's and
1 x SSD from a basic test running multiple parrallel dd's.
With pre-fetch disabled (vfs.zfs.prefetch_disable=1):
== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 161 seconds @ 95 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 297 seconds @ 51 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 54 seconds @ 284 MB/s
With pre-fetch enabled (vfs.zfs.prefetch_disable=0):
== Stripe Balanced (default) ==
Read 15360MB using bs: 1048576, readers: 3, took 91 seconds @ 168 MB/s
== Load Balanced (zfslinux) ==
Read 15360MB using bs: 1048576, readers: 3, took 108 seconds @ 142 MB/s
== Load Balanced (locality freebsd) ==
Read 15360MB using bs: 1048576, readers: 3, took 48 seconds @ 320 MB/s
In addition to the performance changes the code was also restructured, with
the help of Justin Gibbs, to provide a more logical flow which also ensures
vdevs loads are only calculated from the set of valid candidates.
The following additional sysctls where added to allow the administrator
to tune the behaviour of the load algorithm:
* vfs.zfs.vdev.mirror.rotating_inc
* vfs.zfs.vdev.mirror.rotating_seek_inc
* vfs.zfs.vdev.mirror.rotating_seek_offset
* vfs.zfs.vdev.mirror.non_rotating_inc
* vfs.zfs.vdev.mirror.non_rotating_seek_inc
These changes where based on work started by the zfsonlinux developers:
https://github.com/zfsonlinux/zfs/pull/1487
Reviewed by: gibbs, mav, will
MFC after: 2 weeks
Sponsored by: Multiplay
References:
https://github.com/freebsd/freebsd@5c7a6f5dhttps://github.com/freebsd/freebsd@31b7f68dhttps://github.com/freebsd/freebsd@e186f564
Performance Testing:
https://github.com/zfsonlinux/zfs/pull/4334#issuecomment-189057141
Porting notes:
- The tunables were adjusted to have ZoL-style names.
- The code was modified to use ZoL's vd_nonrot.
- Fixes were done to make cstyle.pl happy
- Merge conflicts were handled manually
- freebsd/freebsd@e186f564bc by my
collegue Andriy Gapon has been included. It applied perfectly, but
added a cstyle regression.
- This replaces 556011dbec entirely.
- A typo "IO'a" has been corrected to say "IO's"
- Descriptions of new tunables were added to man/man5/zfs-module-parameters.5.
Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4334
The following options have been added to the zpool add, iostat,
list, status, and split subcommands. The default behavior was
not modified, from zfs(8).
-g Display vdev GUIDs instead of the normal short
device names. These GUIDs can be used in-place of
device names for the zpool detach/off‐
line/remove/replace commands.
-L Display real paths for vdevs resolving all symbolic
links. This can be used to lookup the current block
device name regardless of the /dev/disk/ path used
to open it.
-p Display full paths for vdevs instead of only the
last component of the path. This can be used in
conjunction with the -L flag.
This behavior may also be enabled using the following environment
variables.
ZPOOL_VDEV_NAME_GUID
ZPOOL_VDEV_NAME_FOLLOW_LINKS
ZPOOL_VDEV_NAME_PATH
This change is based on worked originally started by Richard Yao
to add a -g option. Then extended by @ilovezfs to add a -L option
for openzfsonosx. Those changes have been merged, re-factored,
a -p option added and extended to all relevant zpool subcommands.
Original-patch-by: Richard Yao <ryao@gentoo.org>
Extended-by: ilovezfs <ilovezfs@icloud.com>
Extended-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2011Closes#4341
6414 vdev_config_sync could be simpler
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6414https://github.com/illumos/illumos-gate/commit/eb5bb58
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
6815179 zpool import with a large number of LUNs is too slow
6844191 zpool import, scanning of disks should be multi-threaded
References:
https://github.com/illumos/illumos-gate/commit/4f67d75
Porting notes:
- This change was originally never ported to Linux due to it
dependence on the thread pool interface. This patch solves
that issue by switching the code to use the existing taskq
implementation which provides the same basic functionality.
However, in order for this to work properly thread_init()
and thread_fini() must be called around to taskq consumer
to perform the needed thread initialization.
- The check_one_slice, nozpool_all_slices, and check_slices
functions have been disabled for Linux. They are difficult,
but possible, to implement for Linux due to how partitions
are get names. Since this is only an optimization this code
can be added at a latter date.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
4950 files sometimes can't be removed from a full filesystem
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/4950https://github.com/illumos/illumos-gate/commit/4bb7380
Porting notes:
- ZoL currently does not log discards to zvols, so the portion of
this patch that modifies the discard logging to mark it as
freeing space has been discarded.
2. may_delete_now had been removed from zfs_remove() in ZoL.
It has been reintroduced.
3. We do not try to emulate vnodes, so the following lines are
not valid on Linux:
mutex_enter(&vp->v_lock);
may_delete_now = vp->v_count == 1 && !vn_has_cached_data(vp);
mutex_exit(&vp->v_lock);
This has been replaced with:
mutex_enter(&zp->z_lock);
may_delete_now = atomic_read(&ip->i_count) == 1 && !(zp->z_is_mapped);
mutex_exit(&zp->z_lock);
Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The registered xattr .list handler was simplified in the 4.5 kernel
to only perform a permission check. Given a dentry for the file it
must return a boolean indicating if the name is visible. This
differs slightly from the previous APIs which also required the
function to copy the name in to the provided list and return its
size. That is now all the responsibility of the caller.
This should be straight forward change to make to ZoL since we've
always required the caller to make the copy. However, this was
slightly complicated by the need to support 3 older APIs. Yes,
between 2.6.32 and 4.5 there are 4 versions of this interface!
Therefore, while the functional change in this patch is small it
includes significant cleanup to make the code understandable and
maintainable. These changes include:
- Improved configure checks for .list, .get, and .set interfaces.
- Interfaces checked from newest to oldest.
- Strict checking for each possible known interface.
- Configure fails when no known interface is available.
- HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency
with similar iops and fops configure checks.
- POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to
move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}.
Compatibility wrapper were added for old kernels.
- ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing
ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be
a valid pointer, passing NULL for the 'list' and 'name' variables
is allowed and must be checked for. All .list functions were
updated to use the wrapper to aid readability.
- zpl_xattr_filldir() updated to use the .list function for its
permission check which is consistent with the updated Linux 4.5
interface. If a .list function is registered it should return 0
to indicate a name should be skipped, if there is no registered
function the name will be added.
- Additional documentation from xattr(7) describing the correct
behavior for each namespace was added before the relevant handlers.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
5045 use atomic_{inc,dec}_* instead of atomic_add_*
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5045https://github.com/illumos/illumos-gate/commit/1a5e258
Porting notes:
- All changes to non-ZFS files dropped.
- Changes to zfs_vfsops.c dropped because they were Illumos specific.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4220
6298 zfs_create_008_neg and zpool_create_023_neg need to be updated
for large block support
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6298https://github.com/illumos/illumos-gate/commit/e9316f7
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4217
The fast write mutex is intended to protect accounting, but it is
redundant because all accounting is performed through atomic operations.
It also serializes all metaslab IO behind a mutex, which introduces a
theoretical scaling regression that the Illumos developers did not like
when we showed this to them. Removing it makes the selection of the
metaslab_group lock free as it is on Illumos. The selection is not quite
the same without the lock because the loop races with IO completions,
but any imbalances caused by this are likely to be corrected by
subsequent metaslab group selections.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3643
The zfs_znode_hold_enter() / zfs_znode_hold_exit() functions are used to
serialize access to a znode and its SA buffer while the object is being
created or destroyed. This kind of locking would normally reside in the
znode itself but in this case that's impossible because the znode and SA
buffer may not yet exist. Therefore the locking is handled externally
with an array of mutexs and AVLs trees which contain per-object locks.
In zfs_znode_hold_enter() a per-object lock is created as needed, inserted
in to the correct AVL tree and finally the per-object lock is held. In
zfs_znode_hold_exit() the process is reversed. The per-object lock is
released, removed from the AVL tree and destroyed if there are no waiters.
This scheme has two important properties:
1) No memory allocations are performed while holding one of the z_hold_locks.
This ensures evict(), which can be called from direct memory reclaim, will
never block waiting on a z_hold_locks which just happens to have hashed
to the same index.
2) All locks used to serialize access to an object are per-object and never
shared. This minimizes lock contention without creating a large number
of dedicated locks.
On the downside it does require znode_lock_t structures to be frequently
allocated and freed. However, because these are backed by a kmem cache
and very short lived this cost is minimal.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4106
Add a zfs_object_mutex_size module option to facilitate resizing the
the per-dataset znode mutex array. Increasing this value may help
make the deadlock described in #4106 less common, but this is not a
proper fix. This patch is primarily to aid debugging and analysis.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #4106
3465 ::walk ... | ::<dcmd> misinterprets input as symbol names
3466 ::tsd should handle missing/NULL values better
3467 mdb_ctf_vread() could be more useful
3468 mdb enhancements for zfs development
3470 ::whatis does not print callers from KMF_LITE
3473 mdb_get_module() returns wrong module
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://www.illumos.org/issues/3468https://github.com/illumos/illumos-gate/commit/28e4da2
Porting notes:
- The only portion of this patch which applies to ZoL is a small
change to types used in the refcount structure.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4216
Under RHEL6/CentOS6 the default stack size must be increased to 32K
to prevent overflowing the stack when running ztest. This isn't an
issue for other distributions due to either the version of pthreads
or perhaps the compiler. Doubling the stack size resolves the
issue safely for all distribution and leaves us some headroom.
$ sudo -E ztest -V -T 300 -f /var/tmp/
5 vdevs, 7 datasets, 23 threads, 300 seconds...
loading space map for vdev 0 of 1, metaslab 0 of 30 ...
...
loading space map for vdev 0 of 1, metaslab 14 of 30 ...
child died with signal 11
Exited ztest with error 3
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4215
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3749https://github.com/illumos/illumos-gate/commit/3cb69f7
Porting notes:
- [include/sys/spa_impl.h]
- ffe9d38 Add generic errata infrastructure
- 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
- 2668527 Add linux events
- 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
- Updated spa_config_sync() to match illumos with the exception
of a Linux specific block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
6171 dsl_prop_unregister() slows down dataset eviction.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/6171https://github.com/illumos/illumos-gate/commit/03bad06
Porting notes:
- Conflicts
- 3558fd7 Prototype/structure update for Linux
- 2cf7f52 Linux compat 2.6.39: mount_nodev()
- 13fe019 Illumos #3464
- 241b541 Illumos 5959 - clean up per-dataset feature count code
- dsl_prop_unregister() preserved until out of tree consumers
like Lustre can transition to dsl_prop_unregister_all().
- Fixing 'space or tab at end of line' in include/sys/dsl_dataset.h
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
4929 want prevsnap property
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Matt Amdur <matt.amdur@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/4929https://github.com/illumos/illumos-gate/commit/b461c74
Porting notes:
- [include/sys/fs/zfs.h]
- f67d70 Create an 'overlay' property
- 11b9ec Add full SELinux support
- [fs/zfs/dsl_dataset.c]
- This increases the stack size of dsl_dataset_stats() but
nothing has been changed until this is shown to be an issue.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
4891 want zdb option to dump all metadata
Reviewed by: Sonu Pillai <sonu.pillai@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>
We'd like a way for zdb to dump metadata in a machine-readable
format, so that we can bring that back from a customer site for
in-house diagnosis. Think of it as a crash dump for zpools,
which can be used for post-mortem analysis of a malfunctioning
pool
References:
https://www.illumos.org/issues/4891https://github.com/illumos/illumos-gate/commit/df15e41
Porting notes:
- [cmd/zdb/zdb.c]
- a5778ea zdb: Introduce -V for verbatim import
- In main() getopt 'opt' variable removed and the code was
brought back in line with illumos.
- [lib/libzpool/kernel.c]
- 1e33ac1 Fix Solaris thread dependency by using pthreads
- f0e324f Update utsname support
- 4d58b69 Fix vn_open/vn_rdwr error handling
- In vn_open() allocate 'dumppath' on heap instead of stack
- Properly handle 'dump_fd == -1' error path
- Free 'realpath' after added vn_dumpdir_code block
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3749https://github.com/illumos/illumos-gate/commit/3cb69f7
Porting notes:
- [include/sys/spa_impl.h]
- ffe9d38 Add generic errata infrastructure
- 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
- 2668527 Add linux events
- 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
- Updated spa_config_sync() to match illumos with the exception
of a Linux specific block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The function sa_update() accepts a 32-bit length parameter and
assigns it to a 16-bit field in sa_bulk_attr_t, potentially
truncating the passed-in value. This could lead to corrupt system
attribute (SA) records getting written to the pool. Add a VERIFY to
sa_update() to detect cases where overflow would occur. The SA length
is limited to 16-bit values by the on-disk format defined by
sa_hdr_phys_t.
The function zfs_sa_set_xattr() is vulnerable to this bug if the
unpacked nvlist of xattrs is less than 64k in size but the packed
size is greater than 64k. Fix this by appropriately checking the
size of the packed nvlist before calling sa_update(). Add error
handling to zpl_xattr_set_sa() to keep the cached list of SA-based
xattrs consistent with the data on disk.
Lastly, zfs_sa_set_xattr() calls dmu_tx_abort() on an assigned
transaction if sa_update() returns an error, but the DMU only allows
unassigned transactions to be aborted. Wrap the sa_update() call in a
VERIFY0, remove the transaction abort, and call dmu_tx_commit()
unconditionally. This is consistent practice with other callers
of sa_update().
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4150
5745 zfs set allows only one dataset property to be set at a time
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Reviewed by: Richard PALO <richard@NetBSD.org>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Rich Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/5745https://github.com/illumos/illumos-gate/commit/3092556
Porting notes:
- Fix the missing braces around initializer, zfs_cmd_t zc = {"\0"};
- Remove extra format argument in zfs_do_set()
- Declare at the top:
- zfs_prop_t prop;
- nvpair_t *elem;
- nvpair_t *next;
- int i;
- Additionally initialize:
- int added_resv = 0;
- zfs_prop_t prop = 0;
- Assign 0 install of NULL for uint64_t types.
- zc->zc_nvlist_conf = '\0';
- zc->zc_nvlist_src = '\0';
- zc->zc_nvlist_dst = '\0';
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3574
Both lock types were introduced in SPL to allow some locks to be
taken/released with linux lockdep turned off. See SPL commit for
details.
Add the new lock types to zfs_context.h to allow user space compilation.
Depends on SPL commit 692ae8d
SPL pull request refs/pull/480/head
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3895
This deadlock may manifest itself in slightly different ways but
at the core it is caused by a memory allocation blocking on file-
system reclaim in the zio pipeline. This is normally impossible
because zio_execute() disables filesystem reclaim by setting
PF_FSTRANS on the thread. However, kmem cache allocations may
still indirectly block on file system reclaim while holding the
critical vq->vq_lock as shown below.
To resolve this issue zio_buf_alloc_flags() is introduced which
allocation flags to be passed. This can then be used in
vdev_queue_aggregate() with KM_NOSLEEP when allocating the
aggregate IO buffer. Since aggregating the IO is purely a
performance optimization we want this to either succeed or fail
quickly. Trying too hard to allocate this memory under the
vq->vq_lock can negatively impact performance and result in
this deadlock.
* z_wr_iss
zio_vdev_io_start
vdev_queue_io -> Takes vq->vq_lock
vdev_queue_io_to_issue
vdev_queue_aggregate
zio_buf_alloc -> Waiting on spl_kmem_cache process
* z_wr_int
zio_vdev_io_done
vdev_queue_io_done
mutex_lock -> Waiting on vq->vq_lock held by z_wr_iss
* txg_sync
spa_sync
dsl_pool_sync
zio_wait -> Waiting on zio being handled by z_wr_int
* spl_kmem_cache
spl_cache_grow_work
kv_alloc
spl_vmalloc
...
evict
zpl_evict_inode
zfs_inactive
dmu_tx_wait
txg_wait_open -> Waiting on txg_sync
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3808Closes#3867
Since uio now supports bvec, we can convert bio into uio and reuse
dmu_{read,write}_uio. This way, we can remove some duplicate code.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4078
objsetid is not unique across pool, so using it solely as key would cause
panic when automounting two snapshot on different pools with the same
objsetid. We fix this by adding spa pointer as additional key.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3948
Issue #3786
Issue #3887
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/5959https://github.com/illumos/illumos-gate/commit/ca0cc39
Porting notes:
illumos code doesn't check for feature_get_refcount() returning
ENOTSUP (which means feature is disabled) in zdb. zfsonlinux added
a check in https://github.com/zfsonlinux/zfs/commit/784652c
due to #3468. The check was reintroduced here.
Ported-by: Witaut Bajaryn <vitaut.bayaryn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3965
Provide a generic interface to prefetch ZAP entries by name. This
functionality is being added for external consumers such as Lustre.
It is based of the existing zap_prefetch_uint64() version which is
used by the deduplication code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4061
Adding additional entries to the efi conversion array will help prevent
the overwriting of the GPTs of disks with in-use file systems in more
cases. Most notably, this adds partition type 8300 "Linux filesystem"
(0FC63DAF-8483-4772-8E79-3D69D8477DE4), which is often used for ext4 and
btrfs, among others.
This commit itself does nothing to address the underlying problematic
behavior that check_slice() isn't called on partitions of an
unrecognized type, even when they contain a currently mounted file
system.
The additional entries were derived from these two resources:
https://en.wikipedia.org/wiki/GUID_Partition_Tablehttp://sourceforge.net/p/gptfdisk/code/ci/master/tree/parttypes.cc
Signed-off-by: ilovezfs <ilovezfs@icloud.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4016
Currently, the SET_ERROR tracepoint triggers regardless of whether there
is an error or not. On Illumos, SET_ERROR only triggers on an actual
error, which is avoids irrelevant noise. Linux 2.6.38 added support for
conditional tracepoints, so we modify SET_ERROR to use them when they
are avaliable for functionality equivalent to the Illumos functionality.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4043
The xattr_hander->{list,get,set} were changed to take a xattr_handler,
and handler_flags argument was removed and should be accessed by
handler->flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
Commit torvalds/linux@4246a0b63b
("block: add a bi_error field to struct bio") dropped the error
argument from bio_endio in favor of newly introduced bio->bi_error.
This also replaces bio->bi_flags value BIO_UPTODATE.
bio_endio was a 3 argument function until Linux 2.6.24, which made it
a 2 argument function, and now the prototype has changed yet again to
a 1 argument function. Support for pre 2.6.24 kernels was already
dropped with 37f9dac592 ("zvol processing should use struct bio")
which assumed the 2 argument version in zvol_request(). Remaining code
to support the 3 argument version is hereby removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Issue #3799
As part of the large block support effort, it makes sense to add
support for large blocks to **zpios(1)**. The specifying of a zfs
block size for zpios is optional and will default to 128K if the
block size is not specified.
`zpios ... -S size | --blocksize size ...`
This will use *size* ZFS blocks for each test, specified as a comma
delimited list with an optional unit suffix. The supported range is
powers of two from 128K through 16M. A range of block sizes can be
tested as follows: `-S 128K,256K,512K,1M`
Example run below
(non realistic results from a VM and output abbreviated for space)
```
--regioncount=750 --regionsize=8M --chunksize=1M --offset=4K
--threaddelay=0 --cleanup --human-readable --verbose --cleanup
--blocksize=128K,256K,512K,1M
th-cnt rg-cnt rg-sz ch-sz blksz wr-data wr-bw rd-data rd-bw
---------------------------------------------------------------------
4 750 8m 1m 128k 5g 90.06m 5g 93.37m
4 750 8m 1m 256k 5g 79.71m 5g 99.81m
4 750 8m 1m 512k 5g 42.20m 5g 93.14m
4 750 8m 1m 1m 5g 35.51m 5g 89.36m
8 750 8m 1m 128k 5g 85.49m 5g 90.81m
8 750 8m 1m 256k 5g 61.42m 5g 99.24m
8 750 8m 1m 512k 5g 49.09m 5g 108.78m
16 750 8m 1m 128k 5g 86.28m 5g 88.73m
16 750 8m 1m 256k 5g 64.34m 5g 93.47m
16 750 8m 1m 512k 5g 68.84m 5g 124.47m
16 750 8m 1m 1m 5g 53.97m 5g 97.20m
---------------------------------------------------------------------
```
Signed-off-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3795Closes#2071
ZFS incorrectly uses directory-based extended attributes even when
xattr=sa is specified as a dataset property or mount option. Support to
honor temporary mount options including "xattr" was added in commit
0282c4137e. There are two issues with the
mount option handling:
* Libzfs has historically included "xattr" in its list of default mount
options. This overrides the dataset property, so the dataset is always
configured to use directory-based xattrs even when the xattr dataset
property is set to off or sa. Address this by removing "xattr" from
the set of default mount options in libzfs.
* There was no way to enable system attribute-based extended attributes
using temporary mount options. Add the mount options "saxattr" and
"dirxattr" which enable the xattr behavior their names suggest. This
approach has the advantages of mirroring the valid xattr dataset
property values and following existing conventions for mount option
names.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3787
6214 zpools going south
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
References:
https://www.illumos.org/issues/6214http://cr.illumos.org/~webrev/sensille/6214_zpools_going_south/
Porting Notes:
Reintroduce b_compress to the l2arc_buf_hdr_t. In commit b9541d6
the compression flags were moved to the generic b_flags in the
arc_buf_hdr_t. This is a problem because l2arc_compress_buf()
may manipulate the compression flags and this can only be done
safely under the hash lock which is not held. See Illumos 6214
for a detailed analysis of the race.
HDR_GET_COMPRESS() macro was removed from arc_buf_info().
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3757
zfsonlinux/zfs@e20cd6f7a8 caused us to
lose IO accounting on zvols. When I originally wrote that last year, the
symbols we needed to maintain IO accounting were GPL exported, but
torvalds/linux@394ffa503b provided
suitable symbols for restoring this functionality 4 months later. We
can call them to restore the IO accounting on Linux 3.19 and later as
well as any older kernels where that patch is backported.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3741
Internally ZFS keeps a small log to facilitate debugging. By default
the log is disabled, to enable it set zfs_dbgmsg_enable=1. The contents
of the log can be accessed by reading the /proc/spl/kstat/zfs/dbgmsg file.
Writing 0 to this proc file clears the log.
$ echo 1 >/sys/module/zfs/parameters/zfs_dbgmsg_enable
$ echo 0 >/proc/spl/kstat/zfs/dbgmsg
$ zpool import tank
$ cat /proc/spl/kstat/zfs/dbgmsg
1 0 0x01 -1 0 2492357525542 2525836565501
timestamp message
1441141408 spa=tank async request task=1
1441141408 txg 70 open pool version 5000; software version 5000/5; ...
1441141409 spa=tank async request task=32
1441141409 txg 72 import pool version 5000; software version 5000/5; ...
1441141414 command: lt-zpool import tank
Note the zfs_dbgmsg() and dprintf() functions are both now mapped to
the same log. As mentioned above the kernel debug log can be accessed
though the /proc/spl/kstat/zfs/dbgmsg kstat. For user space consumers
log messages are immediately written to stdout after applying the
ZFS_DEBUG environment variable.
$ ZFS_DEBUG=on ./cmd/ztest/ztest -V
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3728
Internally, zvols are files exposed through the block device API. This
is intended to reduce overhead when things require block devices.
However, the ZoL zvol code emulates a traditional block device in that
it has a top half and a bottom half. This is an unnecessary source of
overhead that does not exist on any other OpenZFS platform does this.
This patch removes it. Early users of this patch reported double digit
performance gains in IOPS on zvols in the range of 50% to 80%.
Comments in the code suggest that the current implementation was done to
obtain IO merging from Linux's IO elevator. However, the DMU already
does write merging while arc_read() should implicitly merge read IOs
because only 1 thread is permitted to fetch the buffer into ARC. In
addition, commercial ZFSOnLinux distributions report that regular files
are more performant than zvols under the current implementation, and the
main consumers of zvols are VMs and iSCSI targets, which have their own
elevators to merge IOs.
Some minor refactoring allows us to register zfs_request() as our
->make_request() handler in place of the generic_make_request()
function. This eliminates the layer of code that broke IO requests on
zvols into a top half and a bottom half. This has several benefits:
1. No per zvol spinlocks.
2. No redundant IO elevator processing.
3. Interrupts are disabled only when actually necessary.
4. No redispatching of IOs when all taskq threads are busy.
5. Linux's page out routines will properly block.
6. Many autotools checks become obsolete.
An unfortunate consequence of eliminating the layer that
generic_make_request() is that we no longer calls the instrumentation
hooks for block IO accounting. Those hooks are GPL-exported, so we
cannot call them ourselves and consequently, we lose the ability to do
IO monitoring via iostat. Since zvols are internally files mapped as
block devices, this should be okay. Anyone who is willing to accept the
performance penalty for the block IO layer's accounting could use the
loop device in between the zvol and its consumer. Alternatively, perf
and ftrace likely could be used. Also, tools like latencytop will still
work. Tools such as latencytop sometimes provide a better view of
performance bottlenecks than the traditional block IO accounting tools
do.
Lastly, if direct reclaim occurs during spacemap loading and swap is on
a zvol, this code will deadlock. That deadlock could already occur with
sync=always on zvols. Given that swap on zvols is not yet production
ready, this is not a blocker.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Add the required kernel side infrastructure to parse arbitrary
mount options. This enables us to support temporary mount
options in largely the same way it is handled on other platforms.
See the 'Temporary Mount Point Properties' section of zfs(8)
for complete details.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#985Closes#3351
Pre-2.6.37 kernels support REQ_FUA in request flags, but not in BIO
flags. zvols are the only consumer of VDEV_REQ_FUA and since they are
passed requests, they should be obey the REQ_FUA flag like later
kernels. This optimization will only matter on 2.6.36 and 2.6.37 because
the zvol rework changes things to use bio, where we no longer are able
to distinguish on earlier kernels
Signed-off-by: Richard Yao <ryao@gentoo.org>
Commit 49ddb31506 added the
zfs_arc_average_blocksize parameter to allow control over the size of
the arc hash table. The dbuf hash table's size should be determined
similarly.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3721
The LBA weighting makes sense on rotational media where the outer tracks
have twice the bandwidth of the inner tracks. However, it is detrimental
on nonrotational media such as solid state disks, where the only effect
is to ensure that metaslabs enter the best-fit allocation behavior
sooner, which is detrimental to performance. It also makes no sense on
files where the underlying filesystem can arrange things however it
wants.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3712
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Re-factor the .zfs/snapshot auto-mouting code to take in to account
changes made to the upstream kernels. And to lay the groundwork for
enabling access to .zfs snapshots via NFS clients. This patch makes
the following core improvements.
* All actively auto-mounted snapshots are now tracked in two global
trees which are indexed by snapshot name and objset id respectively.
This allows for fast lookups of any auto-mounted snapshot regardless
without needing access to the parent dataset.
* Snapshot entries are added to the tree in zfsctl_snapshot_mount().
However, they are now removed from the tree in the context of the
unmount process. This eliminates the need complicated error logic
in zfsctl_snapshot_unmount() to handle unmount failures.
* References are now taken on the snapshot entries in the tree to
ensure they always remain valid while a task is outstanding.
* The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right
after the auto-mount succeeds. This allows to kernel to unmount
idle auto-mounted snapshots if needed removing the need for the
zfsctl_unmount_snapshots() function.
* Snapshots in active use will not be automatically unmounted. As
long as at least one dentry is revalidated every zfs_expire_snapshot/2
seconds the auto-unmount expiration timer will be extended.
* Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS
to be immediately unmounted when the dentry was revalidated. This
was a consequence of ZFS invaliding all snapdir dentries to ensure that
negative dentries didn't mask new snapshots. This patch modifies the
behavior such that only negative dentries are invalidated. This solves
the issue and may result in a performance improvement.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3589Closes#3344Closes#3295Closes#3257Closes#3243Closes#3030Closes#2841
Since ZoL allows large blocks to be used by volumes, unlike upstream
illumos, the feature flag must be checked prior to volume creation.
This is critical because unlike filesystems, volumes will create a
object which uses large blocks as part of the create. Therefore, it
cannot be safely checked in zfs_check_settable() after the dataset
can been created.
In addition this patch updates the relevant error messages to use
zfs_nicenum() to print the maximum blocksize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3591
Starting from linux-2.6.37, {kmap,kunmap}_atomic takes 1 argument instead of 2.
We use zfs_{kmap,kunmap}_atomic as wrappers and always take 2 argument, but
ignore the 2nd for newer kernel.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Under Linux filesystem threads responsible for handling I/O are
normally created with the maximum priority. Non-I/O filesystem
processes run with the default priority. ZFS should adopt the
same priority scheme under Linux to maintain good performance
and so that it will complete fairly when other Linux filesystems
are active. The priorities have been updated to the following:
$ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta'
- TS 10743 19 -20 [spl_kmem_cache]
- TS 10744 19 -20 [spl_system_task]
- TS 10745 19 -20 [spl_dynamic_tas]
- TS 10764 19 0 [dbu_evict]
- TS 10765 19 0 [arc_prune]
- TS 10766 19 0 [arc_reclaim]
- TS 10767 19 0 [arc_user_evicts]
- TS 10768 19 0 [l2arc_feed]
- TS 10769 39 0 [z_unmount]
- TS 10770 39 -20 [zvol]
- TS 11011 39 -20 [z_null_iss]
- TS 11012 39 -20 [z_null_int]
- TS 11013 39 -20 [z_rd_iss]
- TS 11014 39 -20 [z_rd_int_0]
- TS 11022 38 -19 [z_wr_iss]
- TS 11023 39 -20 [z_wr_iss_h]
- TS 11024 39 -20 [z_wr_int_0]
- TS 11032 39 -20 [z_wr_int_h]
- TS 11033 39 -20 [z_fr_iss_0]
- TS 11041 39 -20 [z_fr_int]
- TS 11042 39 -20 [z_cl_iss]
- TS 11043 39 -20 [z_cl_int]
- TS 11044 39 -20 [z_ioctl_iss]
- TS 11045 39 -20 [z_ioctl_int]
- TS 11046 39 -20 [metaslab_group_]
- TS 11050 19 0 [z_iput]
- TS 11121 38 -19 [z_wr_iss]
Note that under Linux the meaning of a processes priority is inverted
with respect to illumos. High values on Linux indicate a _low_ priority
while high value on illumos indicate a _high_ priority.
In order to preserve the logical meaning of the minclsyspri and
maxclsyspri macros when they are used by the illumos wrapper functions
their values have been inverted. This way when changes are merged
from upstream illumos we won't need to remember to invert the macro.
It could also lead to confusion.
This patch depends on https://github.com/zfsonlinux/spl/pull/466.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3607
5817 change type of arcs_size from uint64_t to refcount_t
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/5817https://github.com/illumos/illumos-gate/commit/2fd872a
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5376https://github.com/illumos/illumos-gate/commit/2ec99e3
Porting Notes:
The good news is that many of the recent changes made upstream to the
ARC tackled issues previously observed by ZoL with similar solutions.
The bad news is those solution weren't identical to the ones we applied.
This patch is designed to split the difference and apply as much of the
upstream work as possible.
* The arc_available_memory() function was removed previous in ZoL but
due to the upstream changes it makes sense to add it back. This function
has been customized for Linux so that it can be used to determine a low
memory. This provides the same basic functionality as the illumos version
allowing us to minimize changes through the rest of the code base. The
exact mechanism used to detect a low memory state remains unchanged so
this change isn't a significant as it might first appear.
* This patch includes the long standing fix for arc_shrink() which was
originally proposed in #2167. Since there were related changes to this
function it made sense to include that work.
* The arc_init() function has been re-factored. As before it sets sane
default values for the ARC but then calls arc_tuning_update() to apply
user specific tuning made via module options. The arc_tuning_update()
function is then called periodically by the arc_reclaim_thread() to
apply changes to the tunings made during normal operation.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3616Closes#2167
The vfs_compat.h header should include the linux/backing-dev.h header
because it depends on the bdi_* functions defined there. In previous
kernels this header was being indirectly included which prevented a
build failure.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#3596
5661 ZFS: "compression = on" should use lz4 if feature is enabled
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://github.com/illumos/illumos-gate/commit/db1741fhttps://www.illumos.org/issues/5661
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3571
5008 lock contention (rrw_exit) while running a read only load
Reviewed by: Matthew Ahrens <matthew.ahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Porting notes:
This patch ported perfectly cleanly to ZoL. During testing 100% cached
small-block reads, extreme contention was noticed on rrl->rr_lock from
rrw_exit() due to the frequent entering and leaving ZPL. Illumos picked
up this patch from FreeBSD and it also helps under Linux.
On a 1-minute 4K cached read test with 10 fio processes pinned to a single
socket on a 4-socket (10 thread per socket) NUMA system, contentions on
rrl->rr_lock were reduced from 508799 to 43085.
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3555
5175 implement dmu_read_uio_dbuf() to improve cached read performance
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5175https://github.com/illumos/illumos-gate/commit/f8554bb
Porting notes:
This patch doesn't include the changes for the COMSTAR (Common
Multiprotocol SCSI Target) - since it's not available for ZoL.
http://thegreyblog.blogspot.co.at/2010/02/setting-up-solaris-comstar-and.html
Ported by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3392
Illumos 5701 (zpool list reports incorrect "alloc" value for cache
devices) removed l2ad_evict from l2arc_dev_t. It should also be removed
from the zfs_l2arc_evict_class event class.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3534
5163 arc should reap range_seg_cache
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5163https://github.com/illumos/illumos-gate/commit/83803b5
Porting Notes:
Added umem_cache_reap_now() wrapped to suppress unused variable
warning for user space build in arc_kmem_reap_now().
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Over the years the default values for the taskqs used on Linux have
differed slightly from illumos. In the vast majority of cases this
was done to avoid creating an obnoxious number of idle threads which
would pollute the process listing.
With the addition of support for dynamic taskqs all multi-threaded
queues should be created as dynamic taskqs. This allows us to get
the best of both worlds.
* The illumos default values for the I/O pipeline can be restored.
These values are known to work well for most workloads. The only
exception is the zio write interrupt taskq which is changed to
ZTI_P(12, 8). At least under Linux more threads has been shown
to improve performance, see commit 7e55f4e.
* Reduces the number of idle threads on the system when it's not
under heavy load. The maximum number of threads will only be
created when they are required.
* Remove the vdev_file_taskq and rely on the system_taskq instead
which is now dynamic and may have up to 64-threads. Again this
brings us back inline with upstream.
* Tasks dispatched with taskq_dispatch_ent() are allowed to use
dynamic taskqs. The Linux taskq implementation supports this.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3507
Unit testing at ClusterHQ found that passing an invalid file handle to
zfs_ioc_hold results in a NULL pointer dereference on a system without
assertions:
IP: [<ffffffffa0218aa0>] zfsdev_getminor+0x10/0x20 [zfs]
Call Trace:
[<ffffffffa021b4b0>] zfs_onexit_fd_hold+0x20/0x40 [zfs]
[<ffffffffa0214043>] zfs_ioc_hold+0x93/0xd0 [zfs]
[<ffffffffa0215890>] zfsdev_ioctl+0x200/0x500 [zfs]
An assertion would have caught this had they been enabled, but this is
something that the kernel module should handle without failing. We
resolve this by searching the linked list to ensure that the file
handle's private_data points to a valid zfsdev_state_t.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3506
This is the counterpart to zfsonlinux/spl@2345368 which replaces the
cv_wait_interruptible() function with cv_wait_sig(). There is no
functional change to patch merely brings the function names in to
sync to maximize portability.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3450
Issue #3402
As described in the comment above arc_adapt_thread() it is critical
that the arc_adapt_thread() function never sleep while holding a hash
lock. This behavior was possible in the Linux implementation because
the arc_prune() logic was implemented to be synchronous. Under
illumos the analogous dnlc_reduce_cache() function is asynchronous.
To address this the arc_do_user_prune() function is has been reworked
in to two new functions as follows:
* arc_prune_async() is an asynchronous implementation which dispatches
the prune callback to be run by the system taskq. This makes it
suitable to use in the context of the arc_adapt_thread().
* arc_prune() is a synchronous implementation which depends on the
arc_prune_async() implementation but blocks until the outstanding
callbacks complete. This is used in arc_kmem_reap_now() where it
is safe, and expected, that memory will be freed.
This patch additionally adds the zfs_arc_meta_strategy module option
while allows the meta reclaim strategy to be configured. It defaults
to a balanced strategy which has been proved to work well under Linux
but the illumos meta-only strategy can be enabled.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
SPL commit behlendorf/spl@9cef1b5 adds the taskq_wait_outstanding()
interface. See the commit log for the full justification for this
addition. This patch adds the required user space counterpart.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Porting notes and other significant code changes:
The illumos 5368 patch (ARC should cache more metadata), which
was never picked up by ZoL, is mostly reverted by this patch.
Since ZoL relies on the kernel asynchronously calling the shrinker to
actually reap memory, the shrinker wakes up arc_reclaim_waiters_cv every
time it runs.
The arc_adapt_thread() function no longer calls arc_do_user_evicts()
since the newly-added arc_user_evicts_thread() calls it periodically.
Notable conflicting ZoL commits which conflicted with this patch or
whose effects are either duplicated or un-done by this patch:
302f753 - Integrate ARC more tightly with Linux
39e055c - Adjust arc_p based on "bytes" in arc_shrink
f521ce1 - Allow "arc_p" to drop to zero or grow to "arc_c"
77765b5 - Remove "arc_meta_used" from arc_adjust calculation
94520ca - Prune metadata from ghost lists in arc_adjust_meta
Trace support for multilist_insert() and multilist_remove() has been
added and produces the following output:
fio-12498 [077] .... 112936.448324: zfs_multilist__insert: ml { offset 240 numsublists 80 sublistidx 63 }
fio-12498 [077] .... 112936.448347: zfs_multilist__remove: ml { offset 240 numsublists 80 sublistidx 29 }
The following arcstats have been removed:
recycle_miss - Used by arcstat.py and arc_summary.py, both of which
have been updated appropriately.
l2_writes_hdr_miss
The following arcstats have been added:
evict_not_enough - Number of times arc_evict_state() was unable to
evict enough buffers to reach its target amount.
evict_l2_skip - Number of times arc_evict_hdr() skipped eviction
because it was being written to the l2arc.
l2_writes_lock_retry - Replaces l2_writes_hdr_miss. Number of times
l2arc_write_done() failed to acquire hash_lock (and re-tries).
arc_meta_min - Shows the value of the zfs_arc_meta_min module
parameter (see below).
The "index" column of the "dbuf" kstat has been removed since it doesn't
have a direct analog in the new multilist scheme. Additional multilist-
related stats could be added in the future but would likely require
extensions to the mulilist API.
The following module parameters have been added:
zfs_arc_evict_batch_limit - Number of ARC headers to free per sub-list
before moving on to the next sub-list.
zfs_arc_meta_min - Enforce a floor on the amount of metadata in
the ARC.
zfs_arc_num_sublists_per_state - Number of multilist sub-lists per
ARC state.
zfs_arc_overflow_shift - Controls amount by which the ARC must exceed
the target size to be considered "overflowing".
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov
5408 managing ZFS cache devices requires lots of RAM
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Porting notes:
Due to the restructuring of the ARC-related structures, this
patch conflicts with at least the following existing ZoL commits:
6e1d7276c9
Fix inaccurate arcstat_l2_hdr_size calculations
The ARC_SPACE_HDRS constant no longer exists and has been
somewhat equivalently replaced by HDR_L2ONLY_SIZE.
e0b0ca983d
Add visibility in to cached dbufs
The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr
struct requires additional structure member names to be used
when referencing the inner items. Also, the presence of L1 or L2
inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR
macros.
Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Porting notes:
ZoL has moved some ARC definitions into arc_impl.h.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Tim Chase <tim@chase2k.com>
5818 zfs {ref}compressratio is incorrect with 4k sector size
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Albert Lee <trisk@omniti.com>
References:
https://www.illumos.org/issues/5818https://github.com/illumos/illumos-gate/commit/81cd5c5
Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3432
5269 zpool import slow
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5269https://github.com/illumos/illumos-gate/commit/12380e1e
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3396
* Add information about the 'zpool events' command in zpool(8).
* More events and payloads defined in zfs-events(5).
* I/O Stages and I/O Flags sections added.
* Remove unused legacy "zio_deadline" payload define.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3467
