Changed zfs_k(un)map_atomic to zfs_k(un)map_local
Signed-off-by: Jason Lee <jasonlee@lanl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Currently, if a minor is in use when we try to remove it, we'll skip it
and never come back to it again. Since the zvol state is hung off the
minor in the kernel, this can get us into weird situations if something
tries to use it after the removal fails. It's even worse at pool export,
as there's now a vestigial zvol state with no pool under it. It's
weirder again if the pool is subsequently reimported, as the zvol code
(reasonably) assumes the zvol state has been properly setup, when it's
actually left over from the previous import of the pool.
This commit attempts to tackle that by setting a flag on the zvol if its
minor can't be removed, and then checking that flag when a request is
made and rejecting it, thus stopping new work coming in.
The flag also causes a condvar to be signaled when the last client
finishes. For the case where a single minor is being removed (eg
changing volmode), it will wait for this signal before proceeding.
Meanwhile, when removing all minors, a background task is created for
each minor that couldn't be removed on the spot, and those tasks then
wake and clean up.
Since any new tasks are queued on to the pool's spa_zvol_taskq,
spa_export_common() will continue to wait at export until all minors are
removed.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#14872Closes#16364
ZVOL_DUMPIFIED is a vestigial Solaris leftover, and not used anywhere.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16364
When process got SIGSTOP/SIGTSTP, issig() dequeue them and return 0.
But process could still have another signal pending after dequeue. So,
after dequeue, check and return 1, if signal_pending.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes#16464
We always call it twice with JUSTLOOKING and then FORREAL.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#16225
Even though block cloning is much faster than regular copying,
it is not instantaneous - the file might be large and the recordsize
small. It would be nice to be able to interrupt it with a signal
(e.g., SIGINFO on FreeBSD to see the progress).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pawel Jakub Dawidek <pawel@dawidek.net>
Closes#16208
Linux provides SLAB_RECLAIM_ACCOUNT and __GFP_RECLAIMABLE flags to
mark memory allocations that can be freed via shinker calls. It
should allow kernel to tune and group such allocations for lower
memory fragmentation and better reclamation under pressure.
This patch marks as reclaimable most of ARC memory, directly
evictable via ZFS shrinker, plus also dnode/znode/sa memory,
indirectly evictable via kernel's superblock shrinker.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
This commit replaces current usages of schedule_timeout() with
schedule_timeout_interruptible() in code paths that expect the running
task to sleep for a short period of time. When schedule_timeout() is
called without previously calling set_current_state(), the running
task never sleeps because the task state remains in TASK_RUNNING.
By calling schedule_timeout_interruptible() to set the task state to
TASK_INTERRUPTIBLE before calling schedule_timeout() we achieve the
intended/desired behavior of putting the task to sleep for the
specified timeout.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Daniel Perry <dtperry@amazon.com>
Closes#16150
All of these set a #define that doesn't appear anywhere in the tree.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16479
__string field definition includes the source variable for a value
of the string when the TP hits; in 6.10+ kernels, __assign_str()
uses that to copy a value from src to the string, with older
kernels, __assign_str still accepted src as a second parameter.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Co-authored-by: Tony Hutter <hutter2@llnl.gov>
Closes#16475Closes#16515
Freeing an ABD can take sleeping locks to update various stats. We
aren't allowed to sleep on an interrupt handler. So, move the free off
to the io_done callback.
We should never have been freeing things in the interrupt handler, but
we got away with it because we were usually freeing a linear ABD, which
at most is returning two objects to a cache and never sleeping. Scatter
ABDs can be used now, and those have more complex locking.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16687
Commit 46ebd0a updated the build system to make symbolic link for zpool.
However, this commit did not update the automake file to also add the
symbolic link to the CLEANFILES variable. This is necessary so the link
is removed when running make clean/distclean.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16422
ln will fail if the target already exists, which causes make to bail
out. Adding -f makes it more "compiler-like", overwriting the target
instead.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16423
With seq x -1 z and x is less than z FreeBSD seq will print the error:
$ seq 1 -1 2
seq: needs positive increment
Hide this error. Alternatively $COMP_CWORD could be checked for < 2.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Derek Schrock <dereks@lifeofadishwasher.com>
Closes#16234
Not all udev devices have parent devices.
Calling udev_device_get_ functions yield an assertion error
if called with a NULL pointer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Sietse <sietse@wizdom.nu>
Co-authored-by: Sietse <sietse@wizdom.nu>
Closes#16705Closes#16717
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16692
(cherry picked from commit 673efbbf5d160aea9a58f9eaac6d781d0975659a)
It seems out our notion of "properly" aligned IO was incomplete. In
particular, dm-crypt does its own splitting, and assumes that a logical
block will never cross an order-0 page boundary (ie, the physical page
size, not compound size). This effectively means that it needs to be
possible to split a BIO at any page or block size boundary and have it
work correctly.
This updates the alignment check function to enforce these rules (to the
extent possible).
Our response to misaligned data is to make some new allocation that is
properly aligned, and copy the data into it. It turns out that
linearising (via abd_borrow_buf()) is not enough, because we allocate eg
4K blocks from a general purpose slab, and so may receive (or already
have) a 4K block that crosses pages.
So instead, we allocate a new ABD, which is guaranteed to be aligned
properly to block sizes, and then copy everything into it, and back out
on the way back.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16687#16631#15646#15533#14533
(cherry picked from commit 63bafe60ec741c269d29e26b192a8a5c4f6acf92)
If on the first open device's logical ashift is bigger than set
by pool's ashift property, ignore the last as unusable instead of
creating vdev that will fail most of I/Os due to misalignment.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16690
In FreeBSD's `zio_do_crypt_data()`, ensure that two `struct uio`
variables are cleared before copying data out of them. This avoids
accessing garbage data, and fixes gcc `-Wuninitialized` warnings.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Toomas Soome <tsoome@me.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#16688
The macros `simd_stat_init()` and `simd_stat_fini()` in FreeBSD's
`simd.h` are defined as zero, but they are actually only used as
statements. Replace the definitions with `do {} while (0)` instead, to
avoid gcc `-Wunused-value` warnings.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Toomas Soome <tsoome@me.com>
Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes#16693
Just another useful nugget of info in times of strife.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16667
While mounting ZFS root during boot on Linux distributions from initrd,
mount from busybox is effectively used which executes mount system call
directly. This skips the ZFS helper mount.zfs, which checks and enables
the mount options as specified in dataset properties. As a result,
datasets mounted during boot from initrd do not have correct mount
options as specified in ZFS dataset properties.
There has been an attempt to use mount.zfs in zfs initrd script,
responsible for mounting the ZFS root filesystem (PR#13305). This was
later reverted (PR#14908) after discovering that using mount.zfs breaks
mounting of snapshots on root (/) and other child datasets of root have
the same issue (Issue#9461).
This happens because switching from busybox mount to mount.zfs correctly
parses the mount options but also adds 'mntpoint=/root' to the mount
options, which is then prepended to the snapshot mountpoint in
'.zfs/snapshot'. '/root' is the directory on Debian with initramfs-tools
where root filesystem is mounted before pivot_root. When Linux runtime
is reached, trying to access the snapshots on root results in
automounting the snapshot on '/root/.zfs/*', which fails.
This commit attempts to fix the automounting of snapshots on root, while
using mount.zfs in initrd script. Since the mountpoint of dataset is
stored in vfs_mntpoint field, we can check if current mountpoint of
dataset and vfs_mntpoint are same or not. If they are not same, reset
the vfs_mntpoint field with current mountpoint. This fixes the
mountpoints of root dataset and children in respective vfs_mntpoint
fields when we try to access the snapshots of root dataset or its
children. With correct mountpoint for root dataset and children stored
in vfs_mntpoint, all snapshots of root dataset are mounted correctly
and become accessible.
This fix will come into play only if current process, that is trying to
access the snapshots is not in chroot context. The Linux kernel API
that is used to convert struct path into char format (d_path), returns
the complete path for given struct path. It works in chroot environment
as well and returns the correct path from original filesystem root.
However d_path fails to return the complete path if any directory from
original root filesystem is mounted using --bind flag or --rbind flag
in chroot environment. In this case, if we try to access the snapshot
from outside the chroot environment, d_path returns the path correctly,
i.e. it returns the correct path to the directory that is mounted with
--bind flag. However inside the chroot environment, it only returns the
path inside chroot.
For now, there is not a better way in my understanding that gives the
complete path in char format and handles the case where directories from
root filesystem are mounted with --bind or --rbind on another path which
user will later chroot into. So this fix gets enabled if current
process trying to access the snapshot is not in chroot context.
With the snapshots issue fixed for root filesystem, using mount.zfs in
ZFS initrd script, mounts the datasets with correct mount options.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16646
Some C libraries, such as uClibc, do not provide strerror_l() in
which case we fallback to strerror().
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16636Closes#16640
.NOTPARALLEL target is being forced on userspace as well. This commit
removes .NOTPARALEL target and only serializes the execution of
native-deb* targets.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#16622
`zvol_rename_minors()` needs to be given the full path not just the
snapshot name. Use code removed in a0bd735ad as a guide
to providing the necessary values.
Add ZTS check for /dev changes after snapshot rename. After
renaming a snapshot with 'snapdev=visible' ensure that the /dev
entries are updated to reflect the rename.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Closes#14223Closes#16600
Running native-deb* targets in parallel via make is not supported.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#14736
Properly distribute files for native Debian packages. This fixes the
issue with broken release tarballs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15404
Closes#15586
Since arc_evict() run can take some time, arc_c change during it
may result in undesired shift in ARC states balance. Primarily in
case of arc_c reduction it may cause eviction from MFU data state
despite its being below the target already. Instead we should
evict as originally planned and if needed do another round after.
Reviewed-by: Theera K. <tkittich@hotmail.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16576Closes#16605
Compiling with -O0 (no proper optimizations), strlen() call
in loops for comparing the size, isn't being called/initialized
before the actual loop gets started, which causes n-numbers of
strlen() calls (as long as the string is). Keeping the length
before entering in the loop is a good idea.
On some places, even with -O2, both GCC and Clang can't
recognize this pattern, which seem to happen in an array
of char pointer.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: rilysh <nightquick@proton.me>
Closes#16584
Linux 6.10+ with CONFIG_FORTIFY_SOURCE notices memcpy() accessing past
the end of TString, because it has no indication that there there may be
an additional allocation there.
There's no appropriate upstream change for this (ancient) version of
Lua, so this is the narrowest change I could come up with to add a flex
array field to the end of TString to satisfy the check. It's loosely
based on changes from lua/lua@ca41b43f and lua/lua@9514abc2.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16541Closes#16583
Reflect f2330bd156
change in our man pages and add some context.
Wording is primarily copy-pasted from code comments.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#16581
Since dsl_crypto_key_open() references the key, 0d23f5e2e4 should
have called dsl_crypto_key_rele() to drop it first instead of
calling dsl_crypto_key_free() directly. The final result should
actually be the same, but without triggering dck_holds assertion.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16567
Couple places in the code depend on 0 returned only if the task was
actually cancelled. Doing otherwise could lead to extra references
being dropped. The race could be small, but I believe CI hit it
from time to time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16565
This adds the HAVE_KERNEL_NEON and HAVE_KERNEL_FPU_INTERNAL
guards to simd_stat.c defaulted to 0 to make it build again.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Shengqi Chen <harry-chen@outlook.com>
Signed-off-by: Sebastian Wuerl <s.wuerl@mailbox.org>
Closes#16558
Evidently while reworking it on aarch64, I broke it on x86 and
didn't notice.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes#16556
