On debian, systemd complains about missing /bin/awk because it
actually is located at /usr/bin/awk. It is not a good idea to
hardcode binary paths because different linux distros use different
paths. According to systemd's man page it is absolutely safe to
miss paths for binaries located at standard locations (/bin,
/sbin, /usr/bin, ...).
Further, replace this more or less complicated awk command by
grep.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Issue #8510
zfs-import-* services have a hard dependency on bash while not
everyone has bash installed. At this point /bin/sh is sufficient,
so use that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Issue #8510
zfs-import must be done before swap in order for swap on zvol to work
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Henrik Riomar <henrik.riomar@gmail.com>
Closes#8502
ZFS NFS shares mounted on a client with NFSv3 and with open
locks will fail to reclaim those locks after a server reboot.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes#8398
Add an 'enclosure_symlinks' option to vdev_id.conf. This creates
consistently named symlinks to the enclosure devices (/dev/sg*) based
off the configuration in vdev_id.conf. The enclosure symlinks show
up in /dev/by-enclosure/<prefix>-<channel><num>. The links make it
make it easy to run sg_ses on a particular enclosure device. The
enclosure links are created in addition to the normal
/dev/disk/by-vdev links.
'enclosure_symlinks' is only valid in sas_direct configurations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Simon Guest <simon.guest@tesujimath.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#8194
The 'while read line; ...; done' loop is run in a piped subshell
therefore the 'return 0' would not cause a return from the
is_mounted() function. In all cases, this function will
always return 1.
The fix is to 'return 1' from the subshell on a successful match
(no match == return 0), and then negating the final return value.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: TerraTech <TerraTech@users.noreply.github.com>
Closes#8151
This patch collects some minor inconsistencies and typos in the
documentation, logging and testing infrastructure.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#7608
lib/libzfs/libzfs_mount.c:zfs_add_options provides the canonical
mount options used by a `zfs mount` command. Because we cannot call
`zfs mount` directly from a systemd.mount unit, we mirror that logic
in zfs-mount-generator.
The zed script is updated to cache these properties as well.
Include a mini-tutorial in the manual page, properly substitute
configuration paths in zfs-mount-generator.8.in, and standardize the
Makefile.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#7453
zfs-mount-generator implements the "systemd generator" protocol,
producing systemd.mount units from the cached outputs of zfs list,
during early boot, integrating with systemd.
Each pool has an indpendent cache of the command
zfs list -H -oname,mountpoint,canmount -tfilesystem -r $pool
which is kept synchronized by the ZEDLET
history_event-zfs-list-cacher.sh
Datasets not in the cache will be loaded later in the boot process by
zfs-mount.service, including pools without a cache.
Among other things, this allows for complex mount hierarchies.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#7329
This fixes zfs-mount initscript trying to mount swap volumes
as filesystems or anything that has 'none' as a mountpoint
in /etc/fstab. Additionally, fixes trying to mount swap volumes
as a filesystem on RHEL. RHEL defines mountpoint for swap
as `swap`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Georgy Yakovlev <ya@sysdump.net>
Closes#7346Closes#7347
Clear executable bit on zfs-import.in, zfs-mount.in,
zfs-share.in, and zfs-zed.in. These are automake files and
should not be marked executable. This fixes a RPM build error
on Fedora 28.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#7355Closes#7327
Historically a dynamic misc minor number was registered for the
/dev/zfs device in order to prevent minor number collisions. This
was fine but it prevented us from being able to use the kernel
module auto-loaded which requires a known reserved value.
Resolve this issue by adding a configure test to find an available
misc minor number which can then be used in MODULE_ALIAS_MISCDEV at
build time. By adding this alias the zfs kmod is added to the list
of known static-nodes and the systemd-tmpfiles-setup-dev service
will create a /dev/zfs character device at boot time.
This in turn allows us to update the 90-zfs.rules file to make it
aware this is a static node. The upshot of this is that whenever
a process (zpool, zfs, zed) opens the /dev/zfs the kmods will be
automatic loaded. This even works for unprivileged users so there
is no longer a need to manually load the modules at boot time.
As an additional bonus the zed now no longer needs to start after
the zfs-import.service since it will trigger the module load.
In the unlikely event the minor number we selected conflicts with
another out of tree unregistered minor number the code falls back
to dynamically allocating it. In this case the modules again
must be manually loaded.
Note that due to the change in the method of registering the minor
number the zimport.sh test case may incorrectly fail when the
static node for the installed packages is created instead of the
dynamic one. This issue will only transiently impact zimport.sh
for this single commit when we transition and are mixing and
matching methods.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
TEST_ZIMPORT_SKIP="yes"
Closes#7287
This allows for systems with zfs built into the kernel manually to run
these services. Otherwise the service will fail to start.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed-by: Kash Pande <kash@tripleback.net>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes#7174
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Ported-by: Don Brady <don.brady@delphix.com>
Ported-by: John Kennedy <john.kennedy@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533
Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
Use the same method used in zfs-load-key.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Llewelyn Trahaearn <WoefulDerelict@GMail.com>
Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes#7089
'zfs load-key -a' will only be called if needed. If a dataset not
needed for boot does not have its key loaded (home directories for
example) boot can still continue.
zfs:AUTO was not working via dracut, so we still need the generator
script to do its thing.
Reviewed-by: Richard Yao <ryao@gentoo.org>
Reviewed-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes#6982Closes#7004
Some redundancy is present in the systemd dependencies, as
noticed in PR#6764. Existing setups might rely on these quirks,
so these cleanups have been moved to the development branch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#6822
zfs-import-{cache,scan}.service must complete before any mounting of
filesystems can occur. To simplify this dependency, create a target
that is reached After (in the systemd sense) the pool is imported.
Additionally, recommend that legacy zfs mounts use the option
x-systemd.requires=zfs-import.target
to codify this requirement.
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Antonio Russo <antonio.e.russo@gmail.com>
Closes#6764
On systems with SCSI rather than SAS disk topology, this change enables
the vdev_id script to match against the block device path, and therefore
create a vdev alias in /dev/disk/by-vdev.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Simon Guest <simon.guest@tesujimath.org>
Closes#6592
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#6599
By default the mount(8) command, as invoked by 'zfs mount', will try
to resolve any path parameter in its canonical form: this could lead
to mount failures when the cwd contains a symlink having the same name
of the dataset being mounted.
Fix this by explicitly disabling mount(8) path canonicalization.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#1791Closes#6429Closes#6437
Using /sbin/runscript is deprecated and throws a QA warning
when still used in init scripts.
Reviewed-by: bunder2015 <omfgbunder@gmail.com>
Signed-off-by: BtbN <btbn@btbn.de>
Closes#6519
Users can now provide their own scripts to be run
with 'zpool iostat/status -c'. User scripts should be
placed in ~/.zpool.d to be included in zpool's
default search path.
Provide a script which can be used with
'zpool iostat|status -c' that will return the type of
device (hdd, sdd, file).
Provide a script to get various values from smartctl
when using 'zpool iostat/status -c'.
Allow users to define the ZPOOL_SCRIPTS_PATH
environment variable which can be used to override
the default 'zpool iostat/status -c' search path.
Allow the ZPOOL_SCRIPTS_ENABLED environment
variable to enable or disable 'zpool status/iostat -c'
functionality.
Use the new smart script to provide the serial command.
Install /etc/sudoers.d/zfs file which contains the sudoer
rule for smartctl as a sample.
Allow 'zpool iostat/status -c' tests to run in tree.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes#6121Closes#6153
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
logic attempted to predict what will be on disk when this txg syncs, to
know if the overwritten block will be freed (i.e. exists, and has no
snapshots).
OpenZFS-issue: https://www.illumos.org/issues/7793
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3704e0a
Upstream bugs: DLPX-32883a
Closes#5804
Porting notes:
- DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(),
Using the default dnode size would be slightly better.
- DEBUG_DMU_TX wrappers and configure option removed.
- Resolved _by_dnode() conflicts these changes have not yet been
applied to OpenZFS.
The mount(8) command will helpfully try to resolve any device name
which is passed in. It does this by applying some simple heuristics
before passing it along to the registered mount helper.
Normally this fine. However, one of these heuristics is to prepend
the current working directory to the passed device name. If that
resulting directory name exists mount(8) will perform the mount(2)
system call and never invoke the helper utility.
Since the cwd for systemd when running as the system instance is
the root directory the default mount points created by zfs(8) can
cause a mount failure.
This change avoids the issue by explicitly setting the cwd to
a different path when performing the mount.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5719
Use the system /bin directory rather than the package install
@bindir@. This allows --prefix=/usr/local to work as intended.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes#5559
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se>
Closes#5547Closes#5543
Fix misleading error message:
"The /dev/zfs device is missing and must be created.", if /etc/mtab is missing.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Closes#4680Closes#5029
A lot of string replacement target don't have dependency or incorrect
dependency. We setup proper dependency by pattern rules.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4908
* Disable zfs-import-scan.service by default. This ensures that
pools will not be automatically imported unless they appear in
the cache file. When this service is explicitly enabled pools
will be imported with the "cachefile=none" property set. This
prevents the creation of, or update to, an existing cache file.
$ systemctl list-unit-files | grep zfs
zfs-import-cache.service enabled
zfs-import-scan.service disabled
zfs-mount.service enabled
zfs-share.service enabled
zfs-zed.service enabled
zfs.target enabled
* Change services to dynamic from static by adding an [Install]
section and adding 'WantedBy' tags in favor of 'Requires' tags.
This allows for easier customization of the boot behavior.
* Start the zfs-import-cache.service after the root pivot so
the cache file is available in the standard location.
* Start the zfs-mount.service after the systemd-remount-fs.service
to ensure the root fs is writeable and the ZFS filesystems can
create their mount points.
* Change the default behavior to only load the ZFS kernel modules
in zfs-import-*.service or when blkid(8) detects a pool. Users
who wish to unconditionally load the kernel modules must uncomment
the list of modules in /lib/modules-load.d/zfs.conf.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4325Closes#4496Closes#4658Closes#4699
- In older systems without sysroot.mount, import before dracut-mount,
and re-enable old dracut mount hook
- rootflags MUST be present even if the administrator neglected to
specify it explicitly
- Check that mount.zfs exists in sbindir
- Remove awk and head as (now unused) requirements, add grep, and
install the right mount.zfs
- Eliminate one use of grep in Dracut
- Use a more accurate grepping statement to identify zfsutil in rootflags
- Ensure that pooldev is nonempty
- Properly handle /dev/sd* devices and more
- Use new -P to get list of zpool devices
- Bail out of the generator when zfs:AUTO is on the root command line
- Ignore errors from systemctl trying to load sysroot.mount, we only
care about the output
- Determine which one is the correct initqueuedir at run time.
- Add a compatibility getargbool for our detection / setup script.
- Update dracut .gitignore files
Signed-off-by: <Matthew Thode mthode@mthode.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4558Closes#4562
Both Alpine Linux and Gentoo use OpenRC so we share its logic
Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4386
Debian based systems use nfs-kernel-server as the service name.
List both nfs-server.service and nfs-kernel-server.service so
this service will work on multiple distributions.
Signed-off-by: Grischa Zengel <github.zfsonlinux@zengel.info>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4350
This change modifies the import service to use the default cache file
to perform a verbatim import of pools at boot. This fixes code that
searches all devices and imported all visible pools.
Using the cache file is in keeping with the way ZFS has always worked,
how Solaris, Illumos, FreeBSD, and systemd performs imports, and is how
it is written in the man page (zpool(1M,8)):
All pools in this cache are automatically imported when the
system boots.
Importantly, the cache contains important information for importing
multipath devices, and helps control which pools get imported in more
dynamic environments like SANs, which may have thousands of visible
and constantly changing pools, which the ZFS_POOL_EXCEPTIONS variable
is not equipped to handle. Verbatim imports prevent rogue pools from
being automatically imported and mounted where they shouldn't be.
The change also stops the service from exporting pools at shutdown.
Exporting pools is only meant to be performed explicitly by the
administrator of the system.
The old behavior of searching and importing all visible pools is
preserved and can be switched on by heeding the warning and toggling
the ZPOOL_IMPORT_ALL_VISIBLE variable in /etc/default/zfs.
Signed-off-by: James Lee <jlee@thestaticvoid.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3777Closes#3526
For consistency all systemd unit files and init scripts now share
the same names. This prevents an issue where the zed is started
twice on systems where both the systemd and sysv infrastructure is
installed concurrently.
For backward compatibility a 'zed' alias has been added. This
allows the user to interact with the service using either the
name 'zed' or 'zfs-zed'.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3837
* Fix regression - "OVERLAY_MOUNTS" should have been "DO_OVERLAY_MOUNTS".
* Fix update-rc.d commands in postinst. Thanx to subzero79@GitHub.
* Fix make sure a filesystem exists before trying to mount in mount_fs()
* Fix local variable usage.
* Fix to read_mtab():
* Strip control characters (space - \040) from /proc/mounts GLOBALY,
not just first occurrence.
* Don't replace unprintable characters ([/-. ]) for use in the variable
name with underscore. No need, just remove them all together.
* Add check_boolean() to check if a user configure option is
set ('yes', 'Yes', 'YES' or any combination there of) OR '1'.
Anything else is considered 'unset'.
* Add a ZFS_POOL_IMPORT to the default config.
* This is a semi colon separated list of pools to import ONLY.
* This is intended for systems which have _a lot_ of pools (from
a SAN for example) and it would be to many to put in the
ZFS_POOL_EXCEPTIONS variable..
* Add a config option "ZPOOL_IMPORT_OPTS" for adding additional options
to "zpool import".
* Add documentation and the chance of overriding the ZPOOL_CACHE
variable in the config file.
* Remove "sort" from find_pools() and setup_snapshot_booting().
Sometimes not available, and not really necessary.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Issue #3816
Resolve the following error when restarting the zed by force creating
the /run/sendsigs.omit.d/zed link.
sudo /etc/init.d/zfs-zed restart
* Stopping ZFS Event Daemon [ OK ]
* Starting ZFS Event Daemon
ln: failed to create symbolic link `/run/sendsigs.omit.d/zed': File exists
Signed-off-by: SenH <sen@senhaerens.be>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3747
ZED depends on /var. When /var is a separate dataset, it must be
mounted before starting ZED. This change moves the zfs-zed service
from starting first, to starting after zfs-mount, but before zfs-share.
As discussed in issue #3513, ZED does not need to start first in order
to consume events made during the zfs-import and zfs-mount services.
The events will be queued and can be handled later in the boot process.
ZED may, however, handle sharing in the future, so it should be started
before the zfs-share service.
This commit also stops the zfs-import service from writing temp files
to /var/tmp on shutdown and it corrects the return code for the OpenRC
service.
Other OpenRC-specific changes noted in issue #3513 were reitereated in
issue #3715 and committed in da619f3.
Signed-off-by: James Lee <jlee@thestaticvoid.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3513
The dependencies for handling / on ZFS belong in the mount script, not
the zed script.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3715
This is some minor fixes to commits 2cac7f5f11
and 2a34db1bdb.
* Make sure to alien'ate the new initramfs rpm package as well!
The rpm package is build correctly, but alien isn't run on it to
create the deb.
* Before copying file from COPY_FILE_LIST, make sure the DESTDIR/dir exists.
* Include /lib/udev/vdev_id file in the initrd.
* Because the initrd needs to use '/sbin/modprobe' instead of 'modprobe',
we need to use this in load_module() as well.
* Make sure that load_module() can be used more globaly, instead of
calling '/sbin/modprobe' all over the place.
* Make sure that check_module_loaded() have a parameter - module to
check.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3626
Build products from an out of tree build should be written
relative to the build directory. Sources should be referred
to by their locations in the source directory.
This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile. This enables the following:
$ mkdir build
$ cd build
$ ../configure \
--with-spl=$HOME/src/git/spl/ \
--with-spl-obj=$HOME/src/git/spl/build
$ make -s
This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.
Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
Makefile.am:00: but option 'subdir-objects' is disabled
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1082
This is especially needed when using LUKS backed pools.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3536
* In read_mtab(), fix problems (!?) in the mounts file. It will record
'rpool 1' as 'rpool\0401' instead of 'rpool\00401' which seems to be the
correct (at least as far as 'printf' is concerned). Use this using the
external 'echo' command (and not the one built in to the shell) because
the internal one would interpret the backslash code (incorrectly), giving
us a instead.
* Remove reregister_mounts() - no longer needed.
* For Gentoo, the zfs_log_failure_msg() should use eend(), not eerror()
(which requires an error message, which we don't have).
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3488Closes#3509Closes#3514
This reverts commit 036391c980.
Because #3509 came just after this commit was accepted and is related
to the original problem the commit was supposed to fix, we need to
solve the problem in another way.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Use the 'mount' command instead of /proc/mounts to get a list of matching
filesystems.
This because /proc/mounts reports a pool with a space 'rpool 1' as
'rpool\0401'. The space is encoded as 3-digit octal which is legal.
However 'printf "%b"', which we use to filter out other illegal
characters (such as slash, space etc) can't properly interpret this
because it expects 4-digit octal. We get a instead of the space
we expected. The correct value should have been 'rpool\00401' (note
the additional leading zero).
So use 'mount', which interprets all backslash-escapes correctly,
instead.
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3488
* Change the order of the function library check/load.
Redhat based system _can_ have a /lib/lsb/init-functions file (from
the redhat-lsb-core package), but it's only partially what we can use.
Instead, look for that file last, giving the script a chance to catch
the 'real' distribution file.
* Filter out dashes and dots in dataset name in read_mtab().
* Get rid of 'awk' entirely. This is usually in /usr, which might not
be availible.
* Get rid of the 'find /dev/disk/by-*' (find is on /usr, which might not
be availible). Instead use echo in a for loop.
* Rebuild scripts if any of the *.in files changed.
* Move the sed part that filters out duplicates inside the check fo
valid variable.
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3463Closes#3457
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes#2974Closes#2107
