Commit Graph

8 Commits

Author SHA1 Message Date
LOLi
2f71caf2d9 Allow zfs unshare <protocol> -a
Allow `zfs unshare <protocol> -a` command to share or unshare all datasets
of a given protocol, nfs or smb.

Additionally, enable most of ZFS Test Suite zfs_share/zfs_unshare test cases.
To work around some Illumos-specific functionalities ($SHARE/$UNSHARE) some
function wrappers were added around them.

Finally, fix and issue in smb_is_share_active() that would leave SMB shares
exported when invoking 'zfs unshare -a'

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #3238 
Closes #5367
2016-11-29 12:22:38 -07:00
Brian Behlendorf
61f9b2cd12 Replace ISAINFO with is_32bit function
The isainfo(1) utility was used by the ZFS Test Suite to determine
when running on a 32-bit platform.  This non-portable check has been
replaced with an is_32bit helper function which uses getconf(1).
The getconf(1) utility is available for Linux, FreeBSD, and Illumos.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-11-07 10:26:17 -08:00
Brian Behlendorf
13d9a004fe Fix taskq creation failure in vdev_open_children()
When creating and destroying pools in tight loop it's possible to
exhaust the number of allowed threads on a system.  This results
in taskq_create() failling and a NULL dereference.

Resolve the issue by falling back to opening the vdevs all
synchronously.

Reviewed-by: Denys Rtveliashvili <denys@rtveliashvili.name>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes zfsonlinux/spl#521
Closes #4637
2016-10-24 13:28:58 -07:00
slashdd
792517389f Change /etc/mtab to /proc/self/mounts
Fix misleading error message:

 "The /dev/zfs device is missing and must be created.", if /etc/mtab is missing.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Eric Desrochers <eric.desrochers@canonical.com>
Closes #4680 
Closes #5029
2016-09-20 10:07:58 -07:00
John Wren Kennedy
679d73e98b OpenZFS - Performance regression suite for zfstest
Author: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Ported-by: Don Brady <don.brady@intel.com>

OpenZFS-issue: https://www.illumos.org/issues/6950
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dcbf3bd6
Delphix-commit: https://github.com/delphix/delphix-os/commit/978ed49
Closes #4929

ZFS Test Suite Performance Regression Tests

This was pulled into OpenZFS via the compressed arc featureand was
separated out in zfsonlinux as a separate pull request from PR-4768.
It originally came in as QA-4903 in Delphix-OS from John Kennedy.

Expected Usage:

$ DISKS="sdb sdc sdd" zfs-tests.sh -r perf-regression.run

Porting Notes:
1. Added assertions in the setup script to make sure required tools
   (fio, mpstat, ...) are present.
2. For the config.json generation in perf.shlib used arcstats and
    other binaries instead of dtrace to query the values.
3. For the perf data collection:
   - use "zpool iostat -lpvyL" instead of the io.d dtrace script
    (currently not collecting zfs_read/write latency stats)
   - mpstat and iostat take different arguments
   - prefetch_io.sh is a placeholder that uses arcstats instead of
     dtrace
4. Build machines require fio, mdadm and sysstat pakage (YMMV).

Future Work:
   - Need a way to measure zfs_read and zfs_write latencies per pool.
   - Need tools to takes two sets of output and display/graph the
     differences
   - Bring over additional regression tests from Delphix
2016-09-08 16:18:28 -07:00
Sydney Vanda
7050a65d5c Real disk partitioning now enabled in test suite for Linux
When using real devices, specify DISKS="sdb sdc sdd" opposed to
/dev/sdb in zfs-tests.sh - otherwise errors with directory names and
disk names registering as "/dev//dev/sdb" for some tests.  The same
goes for mpath: DISK="mpatha mpathad mpathb"

Expected Usage:

$ DISKS="sdb sdc sdd" zfs-tests.sh

SLICE_PREFIX is now set as "p" for a loop device (ie loop0p2) or
"" for a real device (ie sdb2), or either for multipath devices
(ie mpatha1 or mpath1p1) instead of only "p" by default.  Note that
kpartx partitioning is not currently supported in this patch
(ie "partx") and may need to be disabled on Debian distributions.
Functions added for determining test directory (/dev or /dev/mapper)
as well as slice prefix are determined and exported mostly in the cfg
file of each test group directory.

Currently zpools cannot be created on whole mpath devices that have
been partitioned. In order to fix this tests have either been revised
to use a partition instead, or if there is a size constraint and the
pool needs to be created on the whole disk, partitions are then deleted
if the device is a multipath device.  This functionality is added to
default_cleanup() or to individual cleanup scripts if a non-default
cleanup method is used.

The max partitions is currently set at 8 to account for all of the
tests thus far.

Patch changes are generally encompassed in "if is_linux" construct.

Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Reviewed-by: John Salinas <John.Salinas@intel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: David Quigley <david.quigley@intel.com>
Closes #4447
Closes #4964
Closes #5074
2016-09-08 13:45:34 -07:00
Matthew Ahrens
47dfff3b86 OpenZFS 2605, 6980, 6902
2605 want to resume interrupted zfs send
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: Xin Li <delphij@freebsd.org>
Reviewed by: Arne Jansen <sensille@gmx.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/2605
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/9c3fd12

6980 6902 causes zfs send to break due to 32-bit/64-bit struct mismatch
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>

OpenZFS-issue: https://www.illumos.org/issues/6980
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ea4a67f

Porting notes:
- All rsend and snapshop tests enabled and updated for Linux.
- Fix misuse of input argument in traverse_visitbp().
- Fix ISO C90 warnings and errors.
- Fix gcc 'missing braces around initializer' in
  'struct send_thread_arg to_arg =' warning.
- Replace 4 argument fletcher_4_native() with 3 argument version,
  this change was made in OpenZFS 4185 which has not been ported.
- Part of the sections for 'zfs receive' and 'zfs send' was
  rewritten and reordered to approximate upstream.
- Fix mktree xattr creation, 'user.' prefix required.
- Minor fixes to newly enabled test cases
- Long holds for volumes allowed during receive for minor registration.
2016-06-28 13:47:02 -07:00
Brian Behlendorf
6bb24f4dc7 Add the ZFS Test Suite
Add the ZFS Test Suite and test-runner framework from illumos.
This is a continuation of the work done by Turbo Fredriksson to
port the ZFS Test Suite to Linux.  While this work was originally
conceived as a stand alone project integrating it directly with
the ZoL source tree has several advantages:

  * Allows the ZFS Test Suite to be packaged in zfs-test package.
    * Facilitates easy integration with the CI testing.
    * Users can locally run the ZFS Test Suite to validate ZFS.
      This testing should ONLY be done on a dedicated test system
      because the ZFS Test Suite in its current form is destructive.
  * Allows the ZFS Test Suite to be run directly in the ZoL source
    tree enabled developers to iterate quickly during development.
  * Developers can easily add/modify tests in the framework as
    features are added or functionality is changed.  The tests
    will then always be in sync with the implementation.

Full documentation for how to run the ZFS Test Suite is available
in the tests/README.md file.

Warning: This test suite is designed to be run on a dedicated test
system.  It will make modifications to the system including, but
not limited to, the following.

  * Adding new users
  * Adding new groups
  * Modifying the following /proc files:
    * /proc/sys/kernel/core_pattern
    * /proc/sys/kernel/core_uses_pid
  * Creating directories under /

Notes:
  * Not all of the test cases are expected to pass and by default
    these test cases are disabled.  The failures are primarily due
    to assumption made for illumos which are invalid under Linux.
  * When updating these test cases it should be done in as generic
    a way as possible so the patch can be submitted back upstream.
    Most existing library functions have been updated to be Linux
    aware, and the following functions and variables have been added.
    * Functions:
      * is_linux          - Used to wrap a Linux specific section.
      * block_device_wait - Waits for block devices to be added to /dev/.
    * Variables:            Linux          Illumos
      * ZVOL_DEVDIR         "/dev/zvol"    "/dev/zvol/dsk"
      * ZVOL_RDEVDIR        "/dev/zvol"    "/dev/zvol/rdsk"
      * DEV_DSKDIR          "/dev"         "/dev/dsk"
      * DEV_RDSKDIR         "/dev"         "/dev/rdsk"
      * NEWFS_DEFAULT_FS    "ext2"         "ufs"
  * Many of the disabled test cases fail because 'zfs/zpool destroy'
    returns EBUSY.  This is largely causes by the asynchronous nature
    of device handling on Linux and is expected, the impacted test
    cases will need to be updated to handle this.
  * There are several test cases which have been disabled because
    they can trigger a deadlock.  A primary example of this is to
    recursively create zpools within zpools.  These tests have been
    disabled until the root issue can be addressed.
  * Illumos specific utilities such as (mkfile) should be added to
    the tests/zfs-tests/cmd/ directory.  Custom programs required by
    the test scripts can also be added here.
  * SELinux should be either is permissive mode or disabled when
    running the tests.  The test cases should be updated to conform
    to a standard policy.
  * Redundant test functionality has been removed (zfault.sh).
  * Existing test scripts (zconfig.sh) should be migrated to use
    the framework for consistency and ease of testing.
  * The DISKS environment variable currently only supports loopback
    devices because of how the ZFS Test Suite expects partitions to
    be named (p1, p2, etc).  Support must be added to generate the
    correct partition name based on the device location and name.
  * The ZFS Test Suite is part of the illumos code base at:
    https://github.com/illumos/illumos-gate/tree/master/usr/src/test

Original-patch-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #6
Closes #1534
2016-03-16 13:46:16 -07:00