Internally, zvols are files exposed through the block device API. This
is intended to reduce overhead when things require block devices.
However, the ZoL zvol code emulates a traditional block device in that
it has a top half and a bottom half. This is an unnecessary source of
overhead that does not exist on any other OpenZFS platform does this.
This patch removes it. Early users of this patch reported double digit
performance gains in IOPS on zvols in the range of 50% to 80%.
Comments in the code suggest that the current implementation was done to
obtain IO merging from Linux's IO elevator. However, the DMU already
does write merging while arc_read() should implicitly merge read IOs
because only 1 thread is permitted to fetch the buffer into ARC. In
addition, commercial ZFSOnLinux distributions report that regular files
are more performant than zvols under the current implementation, and the
main consumers of zvols are VMs and iSCSI targets, which have their own
elevators to merge IOs.
Some minor refactoring allows us to register zfs_request() as our
->make_request() handler in place of the generic_make_request()
function. This eliminates the layer of code that broke IO requests on
zvols into a top half and a bottom half. This has several benefits:
1. No per zvol spinlocks.
2. No redundant IO elevator processing.
3. Interrupts are disabled only when actually necessary.
4. No redispatching of IOs when all taskq threads are busy.
5. Linux's page out routines will properly block.
6. Many autotools checks become obsolete.
An unfortunate consequence of eliminating the layer that
generic_make_request() is that we no longer calls the instrumentation
hooks for block IO accounting. Those hooks are GPL-exported, so we
cannot call them ourselves and consequently, we lose the ability to do
IO monitoring via iostat. Since zvols are internally files mapped as
block devices, this should be okay. Anyone who is willing to accept the
performance penalty for the block IO layer's accounting could use the
loop device in between the zvol and its consumer. Alternatively, perf
and ftrace likely could be used. Also, tools like latencytop will still
work. Tools such as latencytop sometimes provide a better view of
performance bottlenecks than the traditional block IO accounting tools
do.
Lastly, if direct reclaim occurs during spacemap loading and swap is on
a zvol, this code will deadlock. That deadlock could already occur with
sync=always on zvols. Given that swap on zvols is not yet production
ready, this is not a blocker.
Signed-off-by: Richard Yao <ryao@gentoo.org>
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This is needed for supporting kernels earlier than 2.6.30. Support for
those kernels was dropped, so we can safely remove this check.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Re-factor the .zfs/snapshot auto-mouting code to take in to account
changes made to the upstream kernels. And to lay the groundwork for
enabling access to .zfs snapshots via NFS clients. This patch makes
the following core improvements.
* All actively auto-mounted snapshots are now tracked in two global
trees which are indexed by snapshot name and objset id respectively.
This allows for fast lookups of any auto-mounted snapshot regardless
without needing access to the parent dataset.
* Snapshot entries are added to the tree in zfsctl_snapshot_mount().
However, they are now removed from the tree in the context of the
unmount process. This eliminates the need complicated error logic
in zfsctl_snapshot_unmount() to handle unmount failures.
* References are now taken on the snapshot entries in the tree to
ensure they always remain valid while a task is outstanding.
* The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right
after the auto-mount succeeds. This allows to kernel to unmount
idle auto-mounted snapshots if needed removing the need for the
zfsctl_unmount_snapshots() function.
* Snapshots in active use will not be automatically unmounted. As
long as at least one dentry is revalidated every zfs_expire_snapshot/2
seconds the auto-unmount expiration timer will be extended.
* Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS
to be immediately unmounted when the dentry was revalidated. This
was a consequence of ZFS invaliding all snapdir dentries to ensure that
negative dentries didn't mask new snapshots. This patch modifies the
behavior such that only negative dentries are invalidated. This solves
the issue and may result in a performance improvement.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3589Closes#3344Closes#3295Closes#3257Closes#3243Closes#3030Closes#2841
Starting from linux-2.6.37, {kmap,kunmap}_atomic takes 1 argument instead of 2.
We use zfs_{kmap,kunmap}_atomic as wrappers and always take 2 argument, but
ignore the 2nd for newer kernel.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Pull struct backing_dev_info off the stack: by linux-4.1 it's grown
past our 1024 byte stack frame warning limit resulting in an incorrect
configure result.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#3671
This is some minor fixes to commits 2cac7f5f11
and 2a34db1bdb.
* Make sure to alien'ate the new initramfs rpm package as well!
The rpm package is build correctly, but alien isn't run on it to
create the deb.
* Before copying file from COPY_FILE_LIST, make sure the DESTDIR/dir exists.
* Include /lib/udev/vdev_id file in the initrd.
* Because the initrd needs to use '/sbin/modprobe' instead of 'modprobe',
we need to use this in load_module() as well.
* Make sure that load_module() can be used more globaly, instead of
calling '/sbin/modprobe' all over the place.
* Make sure that check_module_loaded() have a parameter - module to
check.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3626
Build products from an out of tree build should be written
relative to the build directory. Sources should be referred
to by their locations in the source directory.
This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile. This enables the following:
$ mkdir build
$ cd build
$ ../configure \
--with-spl=$HOME/src/git/spl/ \
--with-spl-obj=$HOME/src/git/spl/build
$ make -s
This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.
Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
Makefile.am:00: but option 'subdir-objects' is disabled
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1082
As of Linux 4.2 the kernel has completely retired the nameidata
structure. One of the few remaining consumers of this interface
were the follow_link() and put_link() callbacks.
This patch adds the required checks to configure to detect the
interface change and updates the functions accordingly. Migrating
to the simple_follow_link() interface was considered but was decided
against ironically due to the increased complexity.
It also should be noted that the kernel follow_link() and put_link()
interfaces changes several times after 4.1 and but before 4.2. This
means there is a narrow range of kernel commits which never appear
in an official tag of the Linux kernel which ZoL will not build.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3596
As of gcc version 5.1.1 a new boolean comparison warning has been
introduced. This warning is harmless but is triggered several places
in the ZFS code base. Because warnings are promoted to errors when
building with debugging enabled it is necessary to disable the warning
when using versions of gcc which automatically enabling this check.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
* Supports booting of a ZFS snapshot.
Do this by cloning the snapshot into a dataset. If this, the resulting
dataset, already exists, destroy it. Then mount it on root.
* If snapshot does not exist, use base dataset (the part before '@')
as boot filesystem instead.
* If no snapshot is specified on the 'root=' kernel command line, but there
is an '@', then get a list of snapshots below that filesystem and ask the
user which to use.
* Clone with 'mountpoint=none' and 'canmount=noauto' - we mount manually
and explicitly.
* For sub-filesystems, that doesn't have a mountpoint property set, we use
the 'org.zol:mountpoint' to keep track of it's mountpoint.
* Allow rollback of snapshots instead of clone it and boot from the clone.
* Allow mounting a root- and subfs with mountpoint=legacy set
* Allow mounting a filesystem which is using nativ encryption.
* Support all currently used kernel command line arguments
All the different distributions have their own standard on what to specify
on the kernel command line to boot of a ZFS filesystem.
* Extra options:
* zfsdebug=(on,yes,1) Show extra debugging information
* zfsforce=(on,yes,1) Force import the pool
* rollback=(on,yes,1) Rollback (instead of clone) the snapshot
* Only try to import pool if it haven't already been imported
* This will negate the need to force import a pool that have not been exported cleanly.
* Support exclusion of pools to import by setting ZFS_POOL_EXCEPTIONS in /etc/default/zfs.
* Support additional configuration variable ZFS_INITRD_ADDITIONAL_DATASETS
to mount additional filesystems not located under your root dataset.
* Include /etc/modprobe.d/{zfs,spl}.conf in the initrd if it/they exist.
* Include the udev rule to use by-vdev for pool imports.
* Include the /etc/default/zfs file to the initrd.
* Only try /dev/disk/by-* in the initrd if USE_DISK_BY_ID is set.
* Use /dev/disk/by-vdev before anything.
* Add /dev as a last ditch attempt.
* Fallback to using the cache file if that exist if nothing else worked.
* Use /sbin/modprobe instead of built-in (BusyBox) modprobe.
This gets rid of the message "modprobe: can't load module zcommon".
Thanx to pcoultha for finding this.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2116Closes#2114
For kernels which do not implement a per-suberblock shrinker,
those older than Linux 3.1, the shrink_dcache_parent() function
was used to attempt to reclaim dentries. This was found not be
entirely reliable and could lead to performance issues on older
kernels running meta-data heavy workloads.
To address this issue a zfs_sb_prune_aliases() function has been
added to implement this functionality. It relies on traversing
the list of znodes for a filesystem and adding them to a private
list with a reference held. The private list can then be safely
walked outside the z_znodes_lock to prune dentires and drop the
last reference so the inode can be freed.
This provides the same synchronous behavior as the per-filesystem
shrinker and has the advantage of depending on only long standing
interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3501
Linux 3.15 commit torvalds/linux@293bc98 introduced two new methods.
The ->read_iter() and ->write_iter() methods were designed to replace
the ->aio_read() and ->aio_write() interfaces. Both interfaces were
preserved for several kernel releases in order to migrate all existing
consumers to the new interfaces. But as of Linux 4.1 the legacy
interface has been retired and the ZFS code must be updated to use
the new interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3352
Kernels >= 3.12 have a NUMA-aware superblock shrinker which is used in
ZoL by zfs_sb_prune(). This patch calls the shrinker for each on-line
NUMA node in order that memory be freed for each one.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3495
* Based on the init scripts included with Debian GNU/Linux, then take code
from the already existing ones, trying to merge them into one set of
scripts that will work for 'everyone' for better maintainability.
* Add configurable variables to control the workings of the init scripts:
* ZFS_INITRD_PRE_MOUNTROOT_SLEEP
Set a sleep time before we load the module (used primarily by initrd
scripts to allow for slower media (such as USB devices etc) to be
availible before we load the zfs module).
* ZFS_INITRD_POST_MODPROBE_SLEEP
Set a timed sleep in the initrd to after the load of the zfs module.
* ZFS_INITRD_ADDITIONAL_DATASETS
To allow for mounting additional datasets in the initrd. Primarily used
in initrd scripts to allow for when filesystem needed to boot (such as
/usr, /opt, /var etc) isn't directly under the root dataset.
* ZFS_POOL_EXCEPTIONS
Exclude pools from being imported (in the initrd and/or init scripts).
* ZFS_DKMS_ENABLE_DEBUG, ZFS_DKMS_ENABLE_DEBUG_DMU_TX, ZFS_DKMS_DISABLE_STRIP
Set to control how dkms should build the dkms packages.
* ZPOOL_IMPORT_PATH
Set path(s) where "zpool import" should import pools from.
This was previously the job of "USE_DISK_BY_ID" (which is still used
for backwards compatibility) but was renamed to allow for better
control of import path(s).
* If old USE_DISK_BY_ID is set, but not new ZPOOL_IMPORT_PATH, then we
set ZPOOL_IMPORT_PATH to sane defaults just to be on the safe side.
* ZED_ARGS
To allow for local options to zed without having to change the init script.
* The import function, do_import(), imports pools by name instead of '-a'
for better control of pools to import and from where.
* If USE_DISK_BY_ID is set (for backwards compatibility), but isn't 'yes'
then ignore it.
* If pool(s) isn't found with a simple "zpool import" (seen it happen),
try looking for them in /dev/disk/by-id (if it exists). Any duplicates
(pools found with both commands) is filtered out.
* IF we have found extra pool(s) this way, we must force USE_DISK_BY_ID
so that the first, simple "zpool import $pool" is able to find it.
* Fallback on importing the pool using the cache file (if it exists) only
if 'simple' import (either with ZPOOL_IMPORT_PATH or the 'built in'
defaults) didn't work.
* The export function, do_export(), will export all pools imported, EXCEPT
the root pool (if there is one).
* ZED script from the Debian GNU/Linux packages added.
* Refreshed ZED init script from behlendorf@5e7a660 to be portable so it
may be used on both LSB and Redhat style systems.
* If there is no pool(s) imported and zed successfully shut down, we will
unload the zfs modules.
* The function library file for the ZoL init script is installed as
/etc/init.d/zfs-functions.
* The four init scripts, the /etc/{defaults,sysconfig,conf.d}/zfs config file
as well as the common function library is tagged as '%config(noreplace)' in
the rpm rules file to make sure they are not replaced automatically if locally
modifed.
* Pitfals and workarounds:
* If we're running from init, remove stale /etc/dfs/sharetab before importing
pools in the zfs-import init script.
* On Debian GNU/Linux, there's a 'sendsigs' script that will kill basically
everything quite early in the shutdown phase and zed is/should be stopped
much later than that. We don't want zed to be among the ones killed, so add
the zed pid to list of pids for 'sendsigs' to ignore.
* CentOS uses echo_success() and echo_failure() to print out status of
command. These in turn uses "echo -n \0xx[etc]" to move cursor and choose
colour etc. This doesn't work with the modified IFS variable we need to
use in zfs-import for some reason, so work around that when we define
zfs_log_{end,failure}_msg() for RedHat and derivative distributions.
* All scripts passes ShellCheck (with one false positive in do_mount()).
Signed-off-by: Turbo Fredriksson turbo@bayour.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Chris Dunlap <cdunlap@llnl.gov>
Closes#2974Closes#2107
Commit 60e9f69 added the --with-mounthelperdir option for Gentoo
and in the process accidentally modified the default installation
location. For security reasons mount(8) expects it to only be
installed under /sbin.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3426
Commit f4af6bb783 which added support
for REQ_FAILFAST_MASK but the new autoconf test didn't use the same
preprocessor macro name as the code did.
The effect is that FAILFAST mode has not been enabled for ZoL in any
post-2.6.35 kernel.
Retire the HAVE_BIO_RW_FAILFAST interface used in pre-2.6.28 kernels.
Raise an error condition if the FAILFAST interface can't be detected.
Signed-off-by: Tim Chase <tim@onlight.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3386
Provide a Redhat specific zfs-kmod.spec file which uses the old style
kmods (not kmods2) packaging. By using the provided kmodtool script
packages can be built which support weak modules. This allows for the
kernel to be updated without having to rebuild the ZFS kernel modules.
Packages for RHEL/Centos/SL/TOSS which use this spec file can by built
as follows:
$ ./configure --with-spec=redhat
$ make rpms
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Originally it was thought that custom spec files might be required
for Fedora. Happily that has turns out not to be the case. Since
this directory just contains symlinks to the generic spec files it
can be removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Explicitly disable the unused by variable warnings by setting
__attribute__((unused)) for bdi_setup_and_register(). This is
required because the function is defined with the __must_check
attribute.
Signed-off-by: Bill McGonigle <bill-github.com-public1@bfccomputing.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3141
The 'capabilities' argument which was passed to bdi_setup_and_register()
has been removed. File systems should no longer pass BDI_CAP_MAP_COPY.
For our purposes this means there are now three different interfaces
which must be handled. A zpl_bdi_setup_and_register() wrapper function
has been introduced to provide a single interface to the ZPL code.
* 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported.
* 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments.
* 4.0 - x.y, bdi_setup_and_register() takes 2 arguments.
I've also taken this opportunity to remove HAVE_BDI because kernels
older then 2.6.32 are no longer supported. All kernels newer than
this will have one of the above interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#3128
struct access f->f_dentry->d_inode was replaced by accessor function
file_inode(f)
Signed-off-by: Joerg Thalheim <joerg@higgsboson.tk>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3084
Using AC_LANG_SOURCE with some versions of autoconf is problematic if
the given source is to be written to a header file. Such versions assume
the contents are to be written to conftest.c and generate shell code to
that effect. The contents of the test program to detect support for
Linux tracepoints were consequently malformed (containing the source for
conftest.h) so the build system incorrectly disabled tracepoints
support. Fix this in ZFS_LINUX_TRY_COMPILE_HEADER by passing the header
source directly to ZFS_LINUX_COMPILE_IFELSE.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2953
This patch leverages Linux tracepoints from within the ZFS on Linux
code base. It also refactors the debug code to bring it back in sync
with Illumos.
The information exported via tracepoints can be used for a variety of
reasons (e.g. debugging, tuning, general exploration/understanding,
etc). It is advantageous to use Linux tracepoints as the mechanism to
export this kind of information (as opposed to something else) for a
number of reasons:
* A number of external tools can make use of our tracepoints
"automatically" (e.g. perf, systemtap)
* Tracepoints are designed to be extremely cheap when disabled
* It's one of the "accepted" ways to export this kind of
information; many other kernel subsystems use tracepoints too.
Unfortunately, though, there are a few caveats as well:
* Linux tracepoints appear to only be available to GPL licensed
modules due to the way certain kernel functions are exported.
Thus, to actually make use of the tracepoints introduced by this
patch, one might have to patch and re-compile the kernel;
exporting the necessary functions to non-GPL modules.
* Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux
tracepoints are not available for unsigned kernel modules
(tracepoints will get disabled due to the module's 'F' taint).
Thus, one either has to sign the zfs kernel module prior to
loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or
newer.
Assuming the above two requirements are satisfied, lets look at an
example of how this patch can be used and what information it exposes
(all commands run as 'root'):
# list all zfs tracepoints available
$ ls /sys/kernel/debug/tracing/events/zfs
enable filter zfs_arc__delete
zfs_arc__evict zfs_arc__hit zfs_arc__miss
zfs_l2arc__evict zfs_l2arc__hit zfs_l2arc__iodone
zfs_l2arc__miss zfs_l2arc__read zfs_l2arc__write
zfs_new_state__mfu zfs_new_state__mru
# enable all zfs tracepoints, clear the tracepoint ring buffer
$ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable
$ echo 0 > /sys/kernel/debug/tracing/trace
# import zpool called 'tank', inspect tracepoint data (each line was
# truncated, they're too long for a commit message otherwise)
$ zpool import tank
$ cat /sys/kernel/debug/tracing/trace | head -n35
# tracer: nop
#
# entries-in-buffer/entries-written: 1219/1219 #P:8
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr...
z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr...
z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr...
z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ...
lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr...
z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr...
z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru...
lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr...
z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru...
lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr...
z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru...
lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ...
lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ...
To highlight the kind of detailed information that is being exported
using this infrastructure, I've taken the first tracepoint line from the
output above and reformatted it such that it fits in 80 columns:
lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss:
hdr {
dva 0x1:0x40082
birth 15491
cksum0 0x163edbff3a
flags 0x640
datacnt 1
type 1
size 2048
spa 3133524293419867460
state_type 0
access 0
mru_hits 0
mru_ghost_hits 0
mfu_hits 0
mfu_ghost_hits 0
l2_hits 0
refcount 1
} bp {
dva0 0x1:0x40082
dva1 0x1:0x3000e5
dva2 0x1:0x5a006e
cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00
lsize 2048
} zb {
objset 0
object 0
level -1
blkid 0
}
For the specific tracepoint shown here, 'zfs_arc__miss', data is
exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and
zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!).
This kind of precise and detailed information can be extremely valuable
when trying to answer certain kinds of questions.
For anybody unfamiliar but looking to build on this, I found the XFS
source code along with the following three web links to be extremely
helpful:
* http://lwn.net/Articles/379903/
* http://lwn.net/Articles/381064/
* http://lwn.net/Articles/383362/
I should also node the more "boring" aspects of this patch:
* The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to
support a sixth paramter. This parameter is used to populate the
contents of the new conftest.h file. If no sixth parameter is
provided, conftest.h will be empty.
* The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced.
This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro,
except it has support for a fifth option that is then passed as
the sixth parameter to ZFS_LINUX_COMPILE_IFELSE.
These autoconf changes were needed to test the availability of the Linux
tracepoint macros. Due to the odd nature of the Linux tracepoint macro
API, a separate ".h" must be created (the path and filename is used
internally by the kernel's define_trace.h file).
* The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This
is to determine if we can safely enable the Linux tracepoint
functionality. We need to selectively disable the tracepoint code
due to the kernel exporting certain functions as GPL only. Without
this check, the build process will fail at link time.
In addition, the SET_ERROR macro was modified into a tracepoint as well.
To do this, the 'sdt.h' file was moved into the 'include/sys' directory
and now contains a userspace portion and a kernel space portion. The
dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as
well.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This file may be added by automake and therefore should be added
to config/.gitignore. For the full list of possible auxiliary
programs see the full automake documentation.
http://www.gnu.org/software/automake/manual/automake.html#Auxiliary-Programs
Signed-off-by: Marcel Wysocki <maci.stgn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2848
Installing outside of the prefix is not permissible under Gentoo Prefix.
The package manager will cause the installation process to fail if/when
it sees this. We could handle this by disabling systemd support on
prefix because systemd does not check these paths, but the Gentoo
Council decided that small files such as these should be installed.
That means disabling systemd support on prefix is not an acceptable
workaround. As a consequence, we need some way of control the directory
into which these files are installed.
Making this configurable increases our compliance with the
freedesktop.org specification, which allows these files to be installed
into /etc/modules-load.d:
http://www.freedesktop.org/software/systemd/man/modules-load.d.html
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
Installing outside of the prefix is not permissible under Gentoo Prefix.
The package manager will cause the installation process to fail if/when
it sees this. I could script a workaround inside the ebuild, but it
seemed to make more sense to make this more configurable.
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
Since we changed the default location for the kernel headers to respect
--prefix in the SPL, we must search that location to prevent user builds
from breaking.
Signed-off-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2641
Apply the license specified in the META file to ensure the
compatibility checks are all performed consistently.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
The HAVE_IOCTL_* configure checks were originally added for
compatibility with an ancient version of glibc. This support
and additional complexity is no longer needed and is therefore
being removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Closes#585
There are two common locations where udev and dracut components are
commonly installed. When building packages using the 'make rpm|deb'
targets check those common locations and pass them to rpmbuild. For
non-standard configurations these values can be provided by the
the following configure options:
--with-udevdir=DIR install udev helpers [default=check]
--with-udevruledir=DIR install udev rules [[UDEVDIR/rules.d]]
--with-dracutdir=DIR install dracut helpers [default=check]
When rebuilding using the source packages the per-distribution
default values specified in the spec file will be used. This is
the preferred way to build packages for a distribution but the
ability to override the defaults is provided as a convenience.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2310Closes#1680
Set LANG=C before calling 'rpmbuild' to avoid rpmbuild failing on
the translated date string in the changelog.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: zfsonlinux/spl#306
This adds ability to set the location of the kernel via defines
when building from the spec files. This is useful when building
against a kernel installed in a non-standard location.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1874
From day one the various ZFS libraries should have been placed in their
own sub-packages. Primarily this allows for multiple major versions of
the libraries to be concurrently installed. It also facilitates a
smaller build environment by minimizing the required dependencies.
The specific changes required to split the libraries from the utilities
are as follows:
* libzpool2, libnvpair1, libuutil1, and libzfs2 packages were added
and contain the versioned shared libraries. The Fedora packaging
guidelines discourage providing static libraries so they are not
included in the packages.
http://fedoraproject.org/wiki/Packaging:Guidelines#Packaging_Static_Libraries
* The zfs-devel package was renamed libzfs2-devel and the new package
obsoletes the old zfs-devel package. This package includes all
the required headers for the libzpool2, libnvpair1, libuutil1, and
libzfs2 libraries and their respective unversioned shared libraries.
This package should eventually be split in to individual lib*-devel
packages but it will still take some work to cleanly separate them.
Therefore the libzfs2-devel package provides the expected lib*-devel
packages so the all proper dependencies can still be created.
http://fedoraproject.org/wiki/Packaging:Guidelines#Devel_Packages
* Moved '/sbin/ldconfig' execution from the zfs packge to each of the
new library packages as described by the packaging guidelines.
http://fedoraproject.org/wiki/Packaging:Guidelines#Shared_Libraries
* The /usr/share/doc/ files were moved in to the libzfs2-devel package.
* Updated config/deb.am to be aware of the packaging changes. This
ensures that 'deb-utils' make target converts all the resulting
packages generated by the 'rpm-utils' target.
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2329Closes: #2341
Issue: #2145
When creating packages in a git repository the release number
can be automatically set by 'git describe'. This normally works
well but if your repository has newer tags which match the form
NAME-VERSION* the release may be incorrectly calculated. To
prevent this the match patten has been restricted to the contents
of the META file, NAME-VERSION.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
We need inode_owner_or_capable() for ZFS file attributes in addition to
xattrs, so it should go into its own file. This moves it into its own
file and changes it to be more comprehensive. It will now fail if no
known good API is detected.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1691
rq_for_each_segment changed from taking bio_vec * to taking bio_vec.
We provide rq_for_each_segment4 which takes both.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
bi_sector, bi_size and bi_idx are moved from bio to bio->bi_iter.
This patch creates BIO_BI_*(bio) macros to hide the differences.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
posix_acl_{create,chmod} is changed to __posix_acl_{create_chmod}
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2124
zed supports a '-M' cmdline opt to lock all pages in memory via
mlockall(). The _POSIX_MEMLOCK define is checked to determine whether
this function is supported. The current test assumes mlockall()
is supported if _POSIX_MEMLOCK is non-zero. However, this test is
insufficient according to mlock(2) and sysconf(3). If _POSIX_MEMLOCK
is -1, mlockall() is not supported; but if _POSIX_MEMLOCK is 0,
availability must be checked at runtime.
This commit adds an autoconf check for mlockall() to user.m4. The zed
code block for mlockall() is now guarded with a test for HAVE_MLOCKALL.
If defined, mlockall() will be called and its runtime availability
checked via its return value.
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
Add macro definitions to AM_CPPFLAGS to propagate makefile installation
directory variables for libexecdir, runstatedir, sbindir, and
sysconfdir.
https://www.gnu.org/software/autoconf/manual/autoconf-2.69/html_node/Installation-Directory-Variables.html
A corollary is that you should not use these variables except
in makefiles. For instance, instead of trying to evaluate
datadir in configure and hard-coding it in makefiles using e.g.,
'AC_DEFINE_UNQUOTED([DATADIR], ["$datadir"], [Data directory.])',
you should add -DDATADIR='$(datadir)' to your makefile's definition
of CPPFLAGS (AM_CPPFLAGS if you are also using Automake).
The runstatedir directory is for "installing data files which the
programs modify while they run, that pertain to one specific machine,
and which need not persist longer than the execution of the program".
https://www.gnu.org/prep/standards/html_node/Directory-Variables.html
It will be defined by autoconf 2.70 or later, and default to
"$(localstatedir)/run".
http://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=a197431414088a417b407b9b20583b2e8f7363bd
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2
torvalds/linux@8077c0d983 added a
__must_check to the bdi_setup_and_register(), which caused our autotools
check to break. zfsonlinux/zfs@729210564a
was intended to correct that, but it depended on -Wno-unused-result,
which is unrecognized in older GCC versions. That commit has been
reverted in favor of a solution that does not require
-Wno-unused-result.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2102Closes#2135
Older GCC versions do not obey -Wno-unused-result. This reverts commit
729210564a in favor of a solution that
does not require -Wno-unused-result.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1906
When testing compiler flags, we only need to do compile test. Otherwise,
configure will fail with "configure: error: cannot run test program while
cross compiling" when cross compiling.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2191
This adds systemd unit files replacing the functionality offered by
the SysV init script found in etc/init.d.
It has been developed and tested on Fedora 19, Fedora 20
and openSuSE 13.1.
Four unit files and one target are offered.
zfs-import-cache.service:
Import pools from /etc/zfs/zpool.cache. This unit will wait for
udev to settle.
zfs-import-scan.service:
Import pools by scanning /dev/disk/by-id for zvols. This unit will
only run if /etc/zfs/zpool.cache is not present. This unit will wait
for udev to settle
zfs-mount.service:
Mount ZFS native filesystems. It contains a dependency to be loaded
before local-fs.target.
zfs-share.service:
Share NFS/SMB filesystems. This unit contains a dependency that
will cause it to be restarted whenever the smb or nfs-server unit
is restarted, restoring the shares added.
zfs.target:
This target pulls in the other units in order to start ZFS. It's
the only unit that can be enabled/disabled, all other services
are static and pulled in by dependencies. It will honour zfs=off
and zfs=no options on the kernel command line.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2108
GCC >+ 4.8's aggressive loop optimization breaks some of the iterators
over the dn_blkptr[] pseudo-array in dnode_phys. Since dn_blkptr[] is
defined as a single-element array, GCC believes an iterator can only
access index 0 and will unroll the loop into a single iteration.
One way to resolve the issue would be to cast the array to a pointer
and fix all the iterators that might break. The only loop where it
is known to cause a problem is this loop in dmu_objset_write_ready():
for (i = 0; i < dnp->dn_nblkptr; i++)
bp->blk_fill += dnp->dn_blkptr[i].blk_fill;
In the common case where dn_nblkptr is 3, the loop is only executed a
single time and "i" is equal to 1 following the loop.
The specific breakage caused by this problem is that the blk_fill of
root block pointers wouldn't be set properly when more than one blkptr
is in use (when no indrect blocks are needed).
The simple reproducing sequence is:
zpool create tank /tank.img
zdb -ddddd tank 0
Notice that "fill=31", however, there are two L0 indirect blocks with
"F=31" and "F=5". The fill count should be 36 rather than 31. This
problem causes an assert to be hit in a simple "zdb tank" when built
with --enable-debug.
However, this approach was not taken because we need to be absolutely
sure we catch all instances of this unwanted optimization. Therefore,
the build system has been updated to detect if GCC supports the
aggressive loop optimization. If it does the optimization will be
explicitly disabled using the -fno-aggressive-loop-optimization option.
Original-fix-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2010Closes#2051
Four new dataset properties have been added to support SELinux. They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8). When one of
these properties is set to something other than 'none'. That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.
For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:
$ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media
This will ensure the filesystem is automatically mounted with that
rootcontext. It is equivalent to manually specifying the rootcontext
with the -o option like this:
$ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media
By default all four contexts are set to 'none'. Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.
Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#1504
This broke compilation against Linux 3.13 and GCC 4.7.3.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1906
There's a missing semicolon and equals sign in the first hunk of this
commit in config/kernel-bdi.m4. This results in the test always
failing. The effects were noticed when rrdtool, a tool which modifies
files by mmap() and msync(), would have data never get saved to disk
in spite of the files working while the mounted filesystem remains
mounted.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#1889
This change adds support for Posix ACLs by storing them as an xattr
which is common practice for many Linux file systems. Since the
Posix ACL is stored as an xattr it will not overwrite any existing
ZFS/NFSv4 ACLs which may have been set. The Posix ACL will also
be non-functional on other platforms although it may be visible
as an xattr if that platform understands SA based xattrs.
By default Posix ACLs are disabled but they may be enabled with
the new 'aclmode=noacl|posixacl' property. Set the property to
'posixacl' to enable them. If ZFS/NFSv4 ACL support is ever added
an appropriate acltype will be added.
This change passes the POSIX Test Suite cleanly with the exception
of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too).
http://www.tuxera.com/community/posix-test-suite/
Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#170
libblkid support is dormant because the autotools check is broken and
liblkid identifies ZFS vdevs as "zfs_member", not "zfs". We fix that
with a few changes:
First, we fix the libblkid autotools check to do a few things:
1. Make a 64MB file, which is the minimum size ZFS permits.
2. Make 4 fake uberblock entries to make libblkid's check succeed.
3. Return 0 upon success to make autotools use the success case.
4. Include stdlib.h to avoid implicit declration of free().
5. Check for "zfs_member", not "zfs"
6. Make --with-blkid disable autotools check (avoids Gentoo sandbox violation)
7. Pass '-lblkid' correctly using LIBS not LDFLAGS.
Second, we change the libblkid support to scan for "zfs_member", not
"zfs".
This makes --with-blkid work on Gentoo.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1751
c38367c73f was meant to eliminate runtime
function pointer modifications in autotools checks because they were
prone to false negatives on kernels hardened by the PaX project.
Unfortunately, I missed the xattr_handler and super_block->s_bdi
autotools checks. Recent changes to PaX constified
xattr_handler->get/set, which lead me to discover this oversight.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1433
Commit torvalds/linux@2233f31aad
replaced ->readdir() with ->iterate() in struct file_operations.
All filesystems must now use the new ->iterate method.
To handle this the code was reworked to use the new ->iterate
interface. Care was taken to keep the majority of changes
confined to the ZPL layer which is already Linux specific.
However, minor changes were required to the common zfs_readdir()
function.
Compatibility with older kernels was accomplished by adding
versions of the trivial dir_emit* helper functions. Also the
various *_readdir() functions were reworked in to wrappers
which create a dir_context structure to pass to the new
*_iterate() functions.
Unfortunately, the new dir_emit* functions prevent us from
passing a private pointer to the filldir function. The xattr
directory code leveraged this ability through zfs_readdir()
to generate the list of xattr names. Since we can no longer
use zfs_readdir() a simplified zpl_xattr_readdir() function
was added to perform the same task.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1653
Issue #1591
The iterate_supers_type() function which was introduced in the
3.0 kernel was supposed to provide a safe way to call an arbitrary
function on all super blocks of a specific type. Unfortunately,
because a list_head was used a bug was introduced which made it
possible for iterate_supers_type() to get stuck spinning on a
super block which was just deactivated.
This can occur because when the list head is removed from the
fs_supers list it is reinitialized to point to itself. If the
iterate_supers_type() function happened to be processing the
removed list_head it will get stuck spinning on that list_head.
The bug was fixed in the 3.3 kernel by converting the list_head
to an hlist_node. However, to resolve the issue for existing
3.0 - 3.2 kernels we detect when a list_head is used. Then to
prevent the spinning from occurring the .next pointer is set to
the fs_supers list_head which ensures the iterate_supers_type()
function will always terminate.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1045Closes#861Closes#790
Linux kernel commit torvalds/linux@db2a144 changed the return type
of block_device_operations->release() to void. Detect the expected
prototype and defined our callout accordingly.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1494
The approach taken was the rework zfs_holey() as little as
possible and then just wrap the code as needed to ensure
correct locking and error handling.
Tested with xfstests 285 and 286. All tests pass except for
7-9 of 285 which try to reserve blocks first via fallocate(2)
and fail because fallocate(2) is not yet supported.
Note that the filp->f_lock spinlock did not exist prior to
Linux 2.6.30, but we avoid the need for autotools check by
virtue of the fact that SEEK_DATA/SEEK_HOLE support was not
added until Linux 3.1.
An autoconf check was added for lseek_execute() which is
currently a private function but the expectation is that it
will be exported perhaps as early as Linux 3.11.
Reviewed-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1384
The previous code was only waiting for the symver file. But the
postinst target of the DKMS script for SPL will not only create
the symvers file, but also the header spl_config.h.
If we are waiting in the configure script of ZFS for the SPL
symvers file, then we also need to wait for spl_config.h.
Otherwise the configure script will abort because the spl_config.h
is not yet available.
On top of that, the function ZFS_AC_SPL_MODULE_SYMVERS is moved
to the end of the function ZFS_AC_SPL to allow both checks share
the with-spl-timeout parameter.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1431
When the kmod packaging was introduced the ability to pass the
--enable-debug and --enable-dmu-tx options from configure all
the way through to `make rpm|deb` was accidenally lost. Update
ZFS_AC_RPM to explicitlu set RPM_DEFINE_COMMON with these
rpmbuild defines.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1402
Preserve the release field when creating Debian packages. The
--keep-version option was not used because it results in a failure
when the git '<commit>_<hash>' syntax is used for the release.
The '_' is a valid character for RPM packages but not for DEBs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Issue #1402
Issue #928
When building a custom release in a git tree provide the ability
to prevent the release field from being overwritten by the
`git describe` output.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1402
The only remaining perl dependency is part of the ZFS_AC_META macro.
By eliminating this and replacing it with awk we can avoid the need
to pull in perl to rebuild the packages.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1380
-D and -I are preprocessor flags, so should preferably be in the
appropriate variable.
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When building from an arbitrary commit in the git tree it's useful
for the resulting packages to be uniquely identifiable. Therefore,
the build system has been updated to detect if your compiling in
git tree.
If you are building in a git tree, and there are commits after the
last annotated tag. Then the <id>-<hash> component of 'git describe'
will be used to overwrite the 'Release:' field in the META file.
The only tricky part is that to ensure the 'make dist' tarball is
built using the correct release. A dist-hook was added to the top
level make file to rewrite the META file using the correct release.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Refresh the existing RPM packaging to conform to the 'Fedora
Packaging Guidelines'. This includes adopting the kmods2
packaging standard which is used fod kmods distributed by
rpmfusion for Fedora/RHEL.
http://fedoraproject.org/wiki/Packaging:Guidelineshttp://rpmfusion.org/Packaging/KernelModules/Kmods2
While the spec files have been entirely rewritten from a
user perspective the only major changes are:
* The Fedora packages now have a build dependency on the
rpmfusion repositories. The generic kmod packages also
have a new dependency on kmodtool-1.22 but it is bundled
with the source rpm so no additional packages are needed.
* The kernel binary module packages have been renamed from
zfs-modules-* to kmod-zfs-* as specificed by kmods2.
* The is now a common kmod-zfs-devel-* package in addition
to the per-kernel devel packages. The common package
contains the development headers while the per-kernel
package contains kernel specific build products.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1341
Because the install location for the spl/zfs-devel headers was
changed we need to refresh the auto-detect code. Note that
for packaging which already explicitly calls --with-spl{-obj}
nothing has changed.
The updated code is now structured like that in ZFS_AC_KERNEL
and should be cleaner and easier to maintain. In addition,
it's stricter about detecting a valid source and object
directory. It requires:
* The source directory contains the file 'spl.release'
* The object directory contains the file 'spl_config.h'
* The following paths will be checked. Notice the /var/lib/
and /usr/src paths require that the spl and zfs version be
matched. This is done to prevent accidentally mixing releases.
dnl # 1) /var/lib/dkms/spl/<version>/build
dnl # 2) /usr/src/spl-<version>/<kernel-version>
dnl # 3) /usr/src/spl-<version>
dnl # 4) ../spl
dnl # 5) /usr/src/kernels/<kernel-version>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The kernel modules are now available in the Arch User Repository
(AUR) via zfs. Since their packaging is maintained and superior
to ours it is being removed from the tree.
https://wiki.archlinux.org/index.php/ZFS
Now that various distributions are picking up the packages we
should eventually be able to remove most of this infrastructure.
Packaging belongs with the distributions not upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The standard dracut directory has moved from /usr/share/dracut to
/usr/lib/dracut. To ensure the dracut modules get installed in
the correct location provide a --with-dracutdir configure option
to set the path.
The default install location has been updated to /usr/lib/dracut
which is used by more current versions of Fedora. However, this
default is overriden by the RPM packaging for consistency.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
PaX/GrSecurity patched kernels implement a dialect of C that relies on a
GCC plugin for enforcement. A basic idea in this dialect is that
function pointers in structures should not change during runtime.
This causes code that modifies function pointers at runtime to fail to
compile in many instances. The autotools checks rely on whether or
not small test cases compile against a given kernel. Some
autotools checks assume some default case if other cases fail. When one
of these autotools checks tests a PaX/GrSecurity patched kernel by
modifying a function pointer at runtime, the default case will be used.
Early detection of such situations is possible by relying on compiler
warnings, which are compiler errors when --enable-debug is used.
Unfortunately, very few people build ZFS with --enable-debug. The more
common situation is that these issues manifest themselves as runtime
failures in the form of NULL pointer exceptions.
Previous patches that addressed such issues with PaX/GrSecurity
compatibility largely relied on rewriting autotools checks to avoid
runtime function pointer modification or the addition of PaX/GrSecurity
specific checks. This patch takes the previous work to its logical
conclusion by eliminating the use of runtime function pointer
modification. This permits the removal of PaX-specific autotools checks
in favor of ones that work across all supported kernels.
This should resolve issues that were reported to occur with
PaX/GrSecurity-patched Linux 3.7.5 kernels on Gentoo Linux.
https://bugs.gentoo.org/show_bug.cgi?id=457176
We should be able to prevent future regressions in PaX/GrSecurity
compatibility by ensuring that all changes to ZFSOnLinux avoid runtime
function pointer modification. At the same time, this does not solve the
issue of silent failures triggering default cases in the autotools
check, which is what permitted these regressions to become runtime
failures in the first place. This will need to be addressed in a future
patch.
Reported-by: Marcin Mirosław <bug@mejor.pl>
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1300
To determine whether the kernel is capable of handling empty barrier
BIOs, we check for the presence of the bio_empty_barrier() macro,
which was introduced in 2.6.24. If this macro is defined, then we can
flush disk vdevs; if it isn't, then flushing is disabled.
Unfortunately, the bio_empty_barrier() macro was removed in 2.6.37,
even though the kernel is still capable of handling empty barrier BIOs.
As a result, flushing is effectively disabled on kernels >= 2.6.37,
meaning that starting from this kernel version, zfs doesn't use
barriers to guarantee on-disk data consistency. This is quite bad and
can lead to potential data corruption on power failures.
This patch fixes the issue by removing the configure check for
bio_empty_barrier(), as we don't support kernels <= 2.6.24 anymore.
Thanks to Richard Kojedzinszky for catching this nasty bug.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1318
As a matter of fact, we're already using -Werror for most tests because
of a bug in kernel-bio-empty-barrier.m4 which sets -Werror without
reverting it afterwards. This meant that all tests which ran after this
one was using -Werror.
This patch simply makes it clear that we're using -Werror and makes
the code more readable and more predictable.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1317
Commit 4b2f65b253 increased the user
space stack by 4x to resolve certain stack overflows. As such it
no longer makes sense to worry about a single extra page which
might or might not be part of the process stack. There is now
ample headroom for normal usage.
By eliminating this configure check we are also resolving the
following segfault which intentionally occurs at configure time
and may be logged in dmesg.
conftest[22156]: segfault at 7fbf18a47e48 ip 00000000004007fe
sp 00007fbf18a4be50 error 6 in conftest[400000+1000]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
It's doubtful many people were impacted by this but commit 6c28567
accidentally broke ZFS builds for 2.6.26 and earlier kernels. This
commit depends on the lookup_bdev() function which exists in 2.6.26
but wasn't exported until 2.6.27.
The availability of the function isn't critical so a wrapper is
introduced which returns ERR_PTR(-ENOTSUP) when the function isn't
defined. This will have the effect of causing zvol_is_zvol() to
always fail for 2.6.26 kernels. This in turn means vdevs will
always get opened concurrently which is good for normal usage.
This will only become an issue if your using a zvol as a vdev in
another pool. In which case you really should be using a newer
kernel anyway.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1205
As of Linux 2.6.37 the right way to register custom dentry
operations is to use the super block's ->s_d_op field.
For older kernels they should be registered as part of the
lookup operation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1223
Lookups in the snapshot control directory for an existing snapshot
fail with ENOENT if an earlier lookup failed before the snapshot was
created. This is because the earlier lookup causes a negative dentry
to be cached which is never invalidated.
The bug can be reproduced as follows (the second ls should succeed):
$ ls /tank/.zfs/snapshot/s
ls: cannot access /tank/.zfs/snapshot/s: No such file or directory
$ zfs snap tank@s
$ ls /tank/.zfs/snapshot/s
ls: cannot access /tank/.zfs/snapshot/s: No such file or directory
To remedy this, always invalidate cached dentries in the snapshot
control directory. Since these entries never exist on disk there is
no significant performance penalty for the extra lookups.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1192
Certain versions of gcc generate an 'unrecognized command
line option' error message when -Wunused-but-set-variable
is used unconditionally. This in turn can cause several
of the autoconf tests to misdetect an interface.
Now, the use of -Wunused-but-set-variable in the autoconf
tests was introduced by commit b9c59ec8 to address a gcc
4.6 compatibility problem. So we really only need to pass
this option for version of gcc which are known to support it.
Therefore, the tests have been updated to use the result of
the existing ZFS_AC_CONFIG_ALWAYS_NO_UNUSED_BUT_SET_VARIABLE
which determines if gcc supports this option.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1004
Revert the portion of commit d3aa3ea which always resulted in the
SAs being update when an mmap()'ed file was closed. That change
accidentally resulted in unexpected ctime updates which upset tools
like git. That was always a horrible hack and I'm happy it will
never make it in to a tagged release.
The right fix is something I initially resisted doing because I
was worried about the additional overhead. However, in hindsight
the overhead isn't as bad as I feared.
This patch implemented the sops->dirty_inode() callback which is
unsurprisingly called when an inode is dirtied. We leverage this
callback to keep the znode SAs strictly in sync with the inode.
However, for now we're going to go slowly to avoid introducing
any new unexpected issues by only updating the atime, mtime, and
ctime. This will cover the callpath of most concern to us.
->filemap_page_mkwrite->file_update_time->update_time->
mark_inode_dirty_sync->__mark_inode_dirty->dirty_inode
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#764Closes#1140
Previously this check was only performed when ./configure was
attempting to autodetect your kernel source directory. But we
should also handle the case where --with-linux was provided
and is obviously wrong. This way we catch the error before
invoking make and compiling the source with an incorrect
autoconf results.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closeszfsonlinux/spl#162
Use the bdev_physical_block_size() interface to determine the
minimize write size which can be issued without incurring a
read-modify-write operation. This is used to set the ashift
correctly to prevent a performance penalty when using AF hard
disks.
Unfortunately, this interface isn't entirely reliable because
it's not uncommon for disks to misreport this value. For this
reason you may still need to manually set your ashift with:
zpool create -o ashift=12 ...
The solution to this in the upstream Illumos source was to add
a white list of known offending drives. Maintaining such a list
will be a burden, but it still may be worth doing if we can
detect a large number of these drives. This should be considered
as future work.
Reported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#916
Use .mkdir instead of .create in 3.3 compatibility check. Linux 3.6
modifies inode_operations->create's function prototype. This causes
an autotools Linux 3.3. compatibility check for a function prototype
change in create, mkdir and mknode to fail. Since mkdir and mknode
are unchanged, we modify the check to examine it instead.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #873
As of Linux commit ebfc3b49a7ac25920cb5be5445f602e51d2ea559 the
struct nameidata is no longer passed to iops->create. Instead
only the result of (inamedata->flags & LOOKUP_EXCL) is passed.
ZFS like almost all Linux fileystems never made use of this so
only the prototype needs to be wrapped for compatibility.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #873
As of Linux commit 00cd8dd3bf95f2cc8435b4cac01d9995635c6d0b the
struct nameidata is no longer passed to iops->lookup. Instead
only the inamedata->flags are passed.
ZFS like almost all Linux fileystems never made use of this so
only the prototype needs to be wrapped for compatibility.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #873
As of Linux commit 9249e17fe094d853d1ef7475dd559a2cc7e23d42 the
mount flags are now passed to sget() so they can be used when
initializing a new superblock.
ZFS never uses sget() in this fashion so we can simply pass a
zero and add a zpl_sget() compatibility wrapper.
Signed-off-by: Yuxuan Shui <yshuiv7@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #873
As of Linux 2.6.36 an elevator_change() interface was added.
This commit updates vdev_elevator_switch() to use this interface
when available, otherwise it falls back to the usermodehelper
method.
Original-patch-by: foobarz <sysop@xeon.(none)>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#906
In order to implement synchronous NFS metadata semantics ZFS
needs to provide the .commit_metadata hook. All it takes there
is to make sure changes are committed to ZIL. Fortunately
zfs_fsync() does just that, so simply calling it from
zpl_commit_metadata() does the trick.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#969
This reverts commit 395350c85d which
accidentally introduced issue #955.
Pools using AF drives which were originally created with a sector
size of 512 bytes will now be correctly detected to have physical
sector size of 4096. This is desirable for a new pool, however for
an existing pool abruptly changing the sector size causes problems.
For this reason, this change is being reverted until the additional
logic can be added to detect the existing pool case. Existing
pools must use the ashift size stored in the label regardless of
what the disk reports. This is critical for compatibility.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #955
Use the bdev_physical_block_size() interface to determine the
minimize write size which can be issued without incurring a
read-modify-write operation. This is used to set the ashift
correctly to prevent a performance penalty when using AF hard
disks.
Unfortunately, this interface isn't entirely reliable because
it's not uncommon for disks to misreport this value. For this
reason you may still need to manually set your ashift with:
zpool create -o ashift=12 ...
The solution to this in the upstream Illumos source was to add
a while list of known offending drives. Maintaining such a list
will be a burden, but it still may be worth doing if we can
detect a large number of these drives. This should be considered
as future work.
Reported-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#916
The autoconf macro which failed if CONFIG_PREEMPT was set in the kernel
config was removed. With the inclusion of a few previous patches
targeting support for preempt enabled kernels, it is now safe to run
with this kernel config option enabled.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#83
Remove all of the generated autotools products from the repository
and update the .gitignore files accordingly.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#718
ZFS fails to build when SPL is built into the kernel on unless
--with-spl=/path/to/kernel/sources is specified. We fallback to the
kernel sources directory when SPL is not found elsewhere to resolve
that.
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closed#896
./configure erroneously detects absence of dops->d_automount
when built against a GrSecurity patched kernel.
Summerized error message found in config.log:
checking whether dops->d_automount() exists
...
In function 'main': ... error: constified variable 'dops'
cannot be local
The "dops" variable cannot be a local variable, so it's
moved to the global scope.
This test also fails if the prototype of the dops->d_automount
function pointer is changed.
Signed-off-by: Massimo Maggi <massimo@mmmm.it>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Closes#884
This commit adds support for building a zfs-modules-dkms sub package
built around Dynamic Kernel Module Support. This is to allow building
packages using the DKMS infrastructure which is intended to ease the
burden of kernel version changes, upgrades, etc.
By default zfs-modules-dkms-* sub package will be built as part of
the 'make rpm' target. Alternately, you can build only the DKMS
module package using the 'make rpm-dkms' target.
Examples:
# To build packaged binaries as well as a dkms packages
$ ./configure && make rpm
# To build only the packaged binary utilities and dkms packages
$ ./configure && make rpm-utils rpm-dkms
Note: Only the RHEL 5/6, CHAOS 5, and Fedora distributions are
supported for building the dkms sub package.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #535
When checking for the SPL Module.symvers file, a timeout can now be
passed in which will pause the configure step while it waits for this
file to be generated. By default, the configure behavior is unchanged as
a timeout of 0 is used. If a positive number of seconds is passed,
configure will wait that number of seconds for the Module.symvers file
before moving on.
The main motivation for this change was to support parallel execution of
'./configure && make' for the SPL and ZFS packages in preparation of
supporting DKMS based packages.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Currently, zvols have a discard granularity set to 0, which suggests to
the upper layer that discard requests of arbirarily small size and
alignment can be made efficiently.
In practice however, ZFS does not handle unaligned discard requests
efficiently: indeed, it is unable to free a part of a block. It will
write zeros to the specified range instead, which is both useless and
inefficient (see dnode_free_range).
With this patch, zvol block devices expose volblocksize as their discard
granularity, so the upper layer is aware that it's not supposed to send
discard requests smaller than volblocksize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#862
This patch adds a new autoconf function: ZFS_LINUX_TRY_COMPILE_SYMBOL.
This new function does the following:
- Call LINUX_TRY_COMPILE with the specified parameters.
- If unsuccessful, return false.
- If successful and we're configuring with --enable-linux-builtin,
return true.
- Else, call CHECK_SYMBOL_EXPORT with the specified parameters and
return the result.
All calls to CHECK_SYMBOL_EXPORT are converted to
LINUX_TRY_COMPILE_SYMBOL so that the tests work even when configuring
for builtin on a kernel which doesn't have loadable module support, or
hasn't been built yet.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
Currently, when building a test case, we're compiling an entire Linux
module from beginning to end. This includes the MODPOST stage, which
generates a "conftest.mod.c" file with some boilerplate module
declaration code.
This poses a problem when configuring for built-in on kernels which have
loadable module support disabled. In this case conftest.mod.c is
referencing disabled code, resulting in a compilation failure, thus
breaking the tests.
This patch fixes the issue by faking the modpost stage when the
--enable-linux-builtin option is provided. It does so by forcing the
modpost command to be /bin/true, and using an empty conftest.mod.c file.
The test module still compiles fine, although the result isn't loadable,
but we don't really care at this point.
Note it is important to preserve the modpost stage when building out of
tree. The ZFS_AC_KERNEL_BLK_END_REQUEST, ZFS_AC_KERNEL_BLK_QUEUE_FLUSH,
and ZFS_AC_KERNEL_BLK_RQ_BYTES configure checks all depend on it to
identify GPL-only symbols.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
This patch adds a new option to configure: --enable-linux-builtin. When
this option is used, the following happens:
- Compilation of kernel modules is disabled.
- A failure to find UTS_RELEASE is followed by a suggestion to run
"make prepare" on the kernel source tree.
This patch also adds a new test which tries to compile an empty module
as a basic toolchain sanity test. If it fails and the option was
specified, the error is followed by a suggestion to run "make scripts"
on the kernel source tree.
Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #851
