Sometimes it fails unable to see any injected write errors.
I guess writing 25KB of zeroes might be not enough to trigger
errors with probability set to 10%. Lets try to write more.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17270
Those tests are write-mostly at the nested pool. Considering we have
3 more layers of caching underneath, we can hint ZFS how to use the
memory better by setting primarycache=metadata.
While there, add missing zpool sync after rm in checkpoint_capacity
before we could potentially see the freed space, would not there be
a pool checkpoint.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Replace `sleep 15` with `zpool wait`, which should take much less
than the 15 seconds. And considering it is called 16 times, this
should save us up to 4 minutes total.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes: #17257
- Kill workload first for faster cleanup.
- Use `zpool wait` for resilver instead of `sleep`.
- Remove irrelevant workload from `online_offline_003_neg`.
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes: #17259
With the advent of fast dedup, there are no longer separate dedup tables
for different copies values. There is now logic that will add DVAs to
the dedup table entry if more copies are needed for new writes. However,
this interacts poorly with ganging. There are two different cases that
can result in mixed gang/non-gang BPs, which are illegal in ZFS.
This change modifies updates of existing FDT; if there are already gang
DVAs in the FDT, we prevent the new write from extending the DDT
entry. We cannot safely mix different gang trees in one block
pointer. if there are non-gang DVAs in the FDT, then this allocation may
not be gangs. If it would gang, we have to redo the whole write as a
non-dedup write.
This change also fixes a refcount leak that could occur if the lead DDT
write failed.
Sponsored by: iXsystems, Inc.
Sponsored-by: Klara, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes: #17123
The test writes 1M of 1KB blocks, which may produce up to 1GB of
dirty data. On top of that ashift=12 likely produces additional
4GB of ZIO buffers during sync process. On top of that we likely
need some page cache since the pool reside on files. And finally
we need to cache the DDT. Not surprising that the test regularly
ends up in OOMs, possibly depending on TXG size variations.
Also replace fio with pretty strange parameter set with a set of
dd writes and TXG commits, just as we neeed here.
While here, remove compression. It has nothing to do here, but
waste CI CPU time.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Fix build errors on Fedora 42 like:
module/zcommon/zfs_valstr.c:193:16: error: initializer-string for
array of 'char' truncates NUL terminator but destination lacks
'nonstring' attribute (3 chars into 2 available)
The arrays in zpool_vdev_os.c and zfs_valstr.c don't need to be
NULL terminated, but we do so to make GCC happy.
Closes: #17242
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Various tools will display draid vdev names with parameters embedded in
them, but would not accept them as valid vdev names when looking them
up, making it difficult to build pipelines involving draid vdevs.
This commit makes it so that if a full draid name is offered for match,
it gets truncated at the first ':' character.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Extend project quota test coverage to verify defaultprojectquota
behavior. These build on existing project quota tests with additional
cases specific to defaultprojectquota functionality.
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Extend test coverage to verify default user and group quota
functionality. These build on existing user/group quota tests with
additional cases specific to default quotas functionality.
Added on top of: https://github.com/openzfs/zfs/pull/16283/commits/e08cd97
Signed-off-by: Todd Seidelmann <seidelma@wharton.upenn.edu>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
cmd/zinject/zinject.c:
- use PRIu64 when printing uint64_t
tests/zfs-tests/cmd/clonefile.c:
- use an unsigned long long to store result from strtoull()
- use %jd for printing off_t, %zu for size_t, %zd for ssize_t
tests/zfs-tests/tests/functional/vdev_disk/page_alignment.c:
- use %zx to print size_t
Discovered when compiling on FreeBSD i386.
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: @ImAwsumm
Missed in #17073, probably because that PR was branched before #17001
was landed and never rebased.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The redundant_metadata setting in ZFS allows users to trade resilience
for performance and space savings. This applies to all data and metadata
blocks in zfs, with one exception: gang blocks. Gang blocks currently
just take the copies property of the IO being ganged and, if it's 1,
sets it to 2. This means that we always make at least two copies of a
gang header, which is good for resilience. However, if the users care
more about performance than resilience, their gang blocks will be even
more of a penalty than usual.
We add logic to calculate the number of gang headers copies directly,
and store it as a separate IO property. This is stored in the IO
properties and not calculated when we decide to gang because by that
point we may not have easy access to the relevant information about what
kind of block is being stored. We also check the redundant_metadata
property when doing so, and use that to decide whether to store an extra
copy of the gang headers, compared to the underlying blocks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Co-authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
There was a recent CI ZTS test failure on FreeBSD 14 for the
dio_read_verify test case. The failure reported there was no ARC reads
while the buffer wes being manipulated. All checksum verify errors for
Direct I/O reads are rerouted through the ARC, so there should be ARC
reads accounted for. In order to help debug any future failures of this
test case, the order of checks has been changed. First there is a check
for DIO verify failures for the reads and then ARC read counts are
checked.
This PR also contains general cleanup of the comments in the test
script.
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
It seems `fio` in `ddt_dedup_vdev_limit` overwhelms the system
with the amount of dirty data caused by DDT updates within one
TXG due to tiny 1KB records used, while I see no reason for this
test to extend the TXGs beyond default.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: @ImAwsumm
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Force receive (zfs receive -F) can rollback or destroy snapshots and
file systems that do not exist on the sending side (see zfs-receive man
page). This means an user having the receive permission can effectively
delete data on receiving side, even if such user does not have explicit
rollback or destroy permissions.
This patch adds the receive:append permission, which only permits
limited, non-forced receive. Behavior for users with full receive
permission is not changed in any way.
Fixes#16943
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes#17015
This PR condenses the FDT dedup log syncing into a single sync
pass. This reduces the overhead of modifying indirect blocks for the
dedup table multiple times per txg. In addition, changes were made to
the formula for how much to sync per txg. We now also consider the
backlog we have to clear, to prevent it from growing too large, or
remaining large on an idle system.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Authored-by: Don Brady <don.brady@klarasystems.com>
Authored-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17038
Since embedded blocks introduction 11 years ago, their writing was
blocked if dedup is enabled. After searching through the modern
code I see no reason for this restriction to exist. Same time
embedded blocks are dramatically cheaper. Even regular write of
so small blocks would likely be cheaper than deduplication, even
if the last is successful, not mentioning otherwise.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#17113
This statx(2) mask returns the alignment restrictions for O_DIRECT
access on the given file.
We're expected to return both memory and IO alignment. For memory, it's
always PAGE_SIZE. For IO, we return the current block size for the file,
which is the required alignment for an arbitrary block, and for the
first block we'll fall back to the ARC when necessary, so it should
always work.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16972
The new Fast Dedup feature has a lot of moving parts, and only some of
them have tests. We have some tests for prefetch and quota, and a
generic ZAP shrinking test, but we don't have anything for the pruning
command or specific to DDT zap shrinking. Here we add a couple small new
tests for zpool ddtprune and DDT-specific ZAP shrinking.
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17049
Most of these are trying to use TMPDIR to put their work files somewhere
sensible. Now that we've set up correctly, they can all just use mktemp
to do the job.
In a couple of places cleaning up temp files wasn't being done
correctly, which has been fixed.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
In all cases, rely on mktemp itself to make the best decision about
where to place the file or directory. In all cases, that decision will
be $TMPDIR, which we have set globally.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
Many tests use mktemp to create temporary files and dirs, which will
usually put them in /tmp unless instructed otherwise. This had led to
many tests trying to give mktemp a useful temp path in ad-hoc ways, and
others just using it directly without knowing they're potentially
leaving stuff lying around.
So we set TMPDIR to FILEDIR, which makes the simplest uses of mktemp put
things in the wanted work dir.
Included here is a hack to get TMPDIR into the test. If a test has to be
run as a different user (most of them), it is run through sudo. ld.so
from glibc will not pass TMPDIR to a setuid program, so instead we
re-set TMPDIR after sudo before running the target command.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The default outputdir had a timestamp appended in TestRun.__init__, and
then the timestamp was unconditionally applied again after the runfile
had been loaded, assuming that an outputdir would be set in the runfile
too. If the runfile didn't have an outputdir, then the outputdir would
get a second timestamp appended.
Further, if test groups or individual tests themselves specificed an
outputdir, those would be set on their config, but would not get a
timestamp appended. It's not entirely clear if that's wrong or not, but
it is certainly not consistent with the rest.
To clean all this up, change things to append a timestamp to a received
outputdir (from arg or runfile) before setting it in any TestRun,
TestGroup or Test object.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The config file value overrides any set by the operator, making it quite
difficult to put the test output elsewhere. The default is
/var/tmp/test_results (via BASEDIR in test-runner) so this shouldn't
change anything for the default case.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
The operator can override TEST_BASE_DIR by setting its source var
FILEDIR through zfs-tests.sh -d. There were a handful of cases where
this was not honoured.
By default FILEDIR (and so TEST_BASE_DIR) is /var/tmp, so there should
be no functional change if the operator does nothing.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Igor Kozhukhov <igor@dilos.org>
This commit adds tests that ensure that the ICP crypto_encrypt() and
crypto_decrypt() produce the correct results for all implementations
available on this platform.
The actual ZTS scripts are simple drivers for the crypto_test program in
it's "correctness" mode. This mode takes a file full of test vectors
(inputs and expected outputs), runs them, and checks that the results
are expected. It will run the tests for each implementation of the
algorithm provided by the ICP.
The test vectors are taken from Project Wycheproof, which provides a
huge number of tests, including exercising many edge cases and common
implementation mistakes. These tests are provided are JSON files, so a
program is included here to convert them into a simpler line-based
format for crypto_test to consume.
crypto_test also has a "performance" mode, which will run simple
benchmarks against all implementations provded by the ICP and output
them for comparison. This is not used by ZTS, but is available to assist
with development of new implementations of the underlying primitives.
Thanks-to: Joel Low <joel@joelsplace.sg>
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Attila Fülöp <attila@fueloep.org>
Don't try to get mg of hole vdev in removal
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Paul Dagnelie <paul.dagnelie@klarasystems.com>
Closes#17080
If the timing is unfortunate, the pool can suspend just as we're failing
because it didn't suspend. If we don't resume the pool, we hang trying
to destroy it.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#17054
recv_fix_encryption_hierarchy() in its present state goes through all
stream filesystems, and for each one traverses the snapshots in order to
find one that exists locally. This happens by calling guid_to_name() for
each snapshot, which iterates through all children of the filesystem.
This results in CPU utilization of 100% for several minutes (for ~1000
filesystems on a Ryzen 4350G) for 1 thread at the end of a raw receive
(-w, regardless whether encrypted or not, dryrun or not).
Fix this by following a different logic: using the top_fs name, call
gather_nvlist() to gather the nvlists for all local filesystems. For
each one filesystem, go through the snapshots to find the corresponding
stream's filesystem (since we know the snapshots guid and can search
with it in stream_avl for the stream's fs). Then go on to fix the
encryption roots and locations as in its present state.
Avoiding guid_to_name() iteratively makes
recv_fix_encryption_hierarchy() significantly faster (from several
minutes to seconds for ~1000 filesystems on a Ryzen 4350G).
Another problem is the following: in case we have promoted a clone of
the filesystem outside the top filesystem specified in zfs send, zfs
receive does not fail but returns an error:
recv_incremental_replication() fails to find its origin and errors out
with needagain=1. This results in recv_fix_hierarchy() not being called
which may render some children of the top fs not mountable since their
encryption root was not updated. To circumvent this make
recv_incremental_replication() silently ignore this error.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes#16929
Introduced functionality to recursively mount datasets with a new
config option `mount_recursively`. Adjusted existing functions to
handle the recursive behavior and added tests to validate the feature.
This enhances support for managing hierarchical ZFS datasets within
a PAM context.
Signed-off-by: Jerzy Kołosowski <jerzy@kolosowscy.pl>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Originally #16856 updated Linux Direct I/O requests to use the new
pin_user_pages API. However, it was an oversight that this PR only
handled iov_iter's of type ITER_IOVEC and ITER_UBUF. Other iov_iter
types may try and use the pin_user_pages API if it is available. This
can lead to panics as the iov_iter is not being iterated over correctly
in zfs_uio_pin_user_pages().
Unfortunately, generic iov_iter API's that call pin_user_page_fast() are
protected as GPL only. Rather than update zfs_uio_pin_user_pages() to
account for all iov_iter types, we can simply just call
zfs_uio_get_dio_page_iov_iter() if the iov_iter type is not ITER_IOVEC
or ITER_UBUF. zfs_uio_get_dio_page_iov_iter() calls the
iov_iter_get_pages() calls that can handle any iov_iter type.
In the future it might be worth using the exposed iov_iter iterator
functions that are included in the header iov_iter.h since v6.7. These
functions allow for any iov_iter type to be iterated over and advanced
while applying a step function during iteration. This could possibly be
leveraged in zfs_uio_pin_user_pages().
A new ZFS test case was added to test that a ITER_BVEC is handled
correctly using this new code path. This test case was provided though
issue #16956.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16956Closes#17006
Injecting a device probe failure is not possible by matching IO types,
because probe IO goes to the label regions, which is explicitly excluded
from injection. Even if it were possible, it would be awkward to do,
because a probe is sequence of reads and writes.
This commit adds a new IO "type" to match for injection, which looks for
the ZIO_FLAG_PROBE flag instead. Any probe IO will be match the
injection record and recieve the wanted error.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16947
It's now a simple wrapper, so lets just call kstat direct.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Removes other custom helpers and direct accesses to /proc.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The old kstat helper function was barely used, I suspect in part because
it was very limited in the kinds of kstats it could gather.
This adds new functions to replace it, for each kind of thing that can
have stats: global, pool and dataset. There's options in there to get a
single stat value, or all values within a group.
Most importantly, the interface is the same for both platforms.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
When building tests with zinject, it can be quite difficult to work out
if you're producing the right kind of IO to match the rules you've set
up.
So, here we extend injection records to count the number of times a
handler matched the operation, and how often an error was actually
injected (ie after frequency and other exclusions are applied).
Then, display those counts in the `zinject` output.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16938
Added in b1e46f869, but empty, so no point keeping it around.
Sponsored-by: https://despairlabs.com/sponsor/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes#16931
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Robert Evans <evansr@google.com>
Closes#16926
Similar to what we saw in #16569, we need to consider that a
replacing vdev should not be considered as fully contributing
to the redundancy of a raidz vdev even though current IO has
enough redundancy.
When a failed vdev_probe() is faulting a disk, it now checks
if that disk is required, and if so it suspends the pool until
the admin can return the missing disks.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16864
Instead of using hardwired value for SPA_DISCARD_MEMORY_LIMIT,
use save_tunable and restore_tunable to restore the pre-test state.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16919
Remove TESTDIRS as it is not set for pam tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16920
Originally hex value is used as decimal.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16917
cleanup.ksh is assuming we have TESTDIRS set.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16915
Before we can remove test files, we need to unmount datasets
used by test first.
See also: zfs_mount_all_mountpoints.ksh
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Toomas Soome <tsoome@me.com>
Closes#16914
This test takes 3 minutes on RELEASE FreeBSD bots, but on CURRENT,
probably due to debugging it has in kernel, it does not complete
within 10 minutes, ending up killed. As I see all the redacting
here happens within the first ~128MB of the file, so I hope it
won't matter if there is 1GB of data instead of 2GB.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#11141
procfs might be not mounted on FreeBSD. Plus checking for specific
PID might be not exactly reliable. Check for empty list of jobs
instead.
Premature loop exit can result in failed test and failed cleanup,
failing also some following tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#11141
FreeBSD recently removed non-standard hex numbers support from awk.
Neither it supports -n argument, enabling it in gawk. Instead of
depending on those rewrite list_file_blocks() fuction to handle the
hex math in shell instead of awk.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by:Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#11141
Confirming that clearing pool and vdev userprops produce the same
result: an empty value, with default source.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16887
Many RAIDZ/dRAID tests filled files doing millions of 100 or even
10 byte writes. It makes very little sense since we are not
micro-benchmarking syscalls or VFS layer here, while before the
blocks reach the vdev layer absolute majority of the small writes
will be aggregated. In some cases I see we spend almost as much
time creating the test files as actually running the tests. And
sometimes the tests even time out after that.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16905
Same as writes block cloning can increase block size and number of
indirection levels. That means it can dirty block 0 at level 0 or
at new top indirection level without explicitly holding them.
A block cloning test case for large offsets has been added.
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Ameer Hamza <ahamza@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16825
Some users might want to scrub only new data because they would like
to know if the new write wasn't corrupted. This PR adds possibility
scrub only newly written data.
This introduces new `last_scrubbed_txg` property, indicating the
transaction group (TXG) up to which the most recent scrub operation
has checked and repaired the dataset, so users can run scrub only
from the last saved point. We use a scn_max_txg and scn_min_txg
which are already built into scrub, to accomplish that.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mariusz Zaborski <mariusz.zaborski@klarasystems.com>
Sponsored-By: Wasabi Technology, Inc.
Sponsored-By: Klara Inc.
Closes#16301
There's interesting info in there that is going to help with
understanding dedup behavior at any given moment.
Since this is a format change, tests that rely on that output have been
modified to match.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Closes#16755
Increase the injected delay to 1000ms and the ZIO_SLOW_IO_MS threshold
to 750ms to avoid false positives due to unrelated slow IOs which may
occur in the CI environment. Additionally, clear the fault injection as
soon as it is no longer required for the test case.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16769
If we write less than 113 bytes with enabled compression we get
embeded block, which then fails check for number of cloned blocks
in bclone_test.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Pawel Jakub Dawidek <pjd@FreeBSD.org>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes#16740
This patch fixes compilation with uClibc by applying the same fallback
as commit e12d76176d to the `getversion.c`
file, which was previously overlooked.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Closes#16735Closes#16741
When building on musl, we get:
```
In file included from tests/zfs-tests/cmd/getversion.c:22:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect
#include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
In file included from module/os/linux/zfs/vdev_file.c:36:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect
#include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
```
Bug: https://bugs.gentoo.org/925235
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Sam James <sam@gentoo.org>
Closes#15925
Fedora 41 was released 10/29/24, and Fedora 39 will be EOL on 11/12/24.
Update Fedora runners in the test suite. Some minor tweaks also needed
to support ksh 1.0.10.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16700
It seems out our notion of "properly" aligned IO was incomplete. In
particular, dm-crypt does its own splitting, and assumes that a logical
block will never cross an order-0 page boundary (ie, the physical page
size, not compound size). This effectively means that it needs to be
possible to split a BIO at any page or block size boundary and have it
work correctly.
This updates the alignment check function to enforce these rules (to the
extent possible).
Our response to misaligned data is to make some new allocation that is
properly aligned, and copy the data into it. It turns out that
linearising (via abd_borrow_buf()) is not enough, because we allocate eg
4K blocks from a general purpose slab, and so may receive (or already
have) a 4K block that crosses pages.
So instead, we allocate a new ABD, which is guaranteed to be aligned
properly to block sizes, and then copy everything into it, and back out
on the way back.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16687#16631#15646#15533#14533
Add a LUKS sanity test to trigger: #16631
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16681
The following tests have been observed to occasionally fail when
running under the CI. Updated our exceptions list to track them.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16670
Increase the pool import time allowed by assuming a minimum reduction
to 1/2 instead of 1/3 when comparing sequential to parallel import
times. This is sufficient to verify parallel imports are working as
intended and should address the occasional false positive failure
when the time is slightly exceeded.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16638
As described in the comment above this check the space used by
logged entries is not accounted for and some margin needs to be
added in. While uncommon we have slightly exceeded the 600,000
threshold on some CI run so we increase the limit a bit more.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16637
Mostly so that with the JSON formatting options are also used, they all
look the same. To my eye, `-j --json-flat-vdevs` suggests that they are
different or unrelated, while `--json --json-flat-vdevs` invites no
further questions.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16632
This fixes an oversight in the Direct I/O PR. There is nothing that
stops a process from manipulating the contents of a buffer for a
Direct I/O read while the I/O is in flight. This can lead checksum
verify failures. However, the disk contents are still correct, and this
would lead to false reporting of checksum validation failures.
To remedy this, all Direct I/O reads that have a checksum verification
failure are treated as suspicious. In the event a checksum validation
failure occurs for a Direct I/O read, then the I/O request will be
reissued though the ARC. This allows for actual validation to happen and
removes any possibility of the buffer being manipulated after the I/O
has been issued.
Just as with Direct I/O write checksum validation failures, Direct I/O
read checksum validation failures are reported though zpool status -d in
the DIO column. Also the zevent has been updated to have both:
1. dio_verify_wr -> Checksum verification failure for writes
2. dio_verify_rd -> Checksum verification failure for reads.
This allows for determining what I/O operation was the culprit for the
checksum verification failure. All DIO errors are reported only on the
top-level VDEV.
Even though FreeBSD can write protect pages (stable pages) it still has
the same issue as Linux with Direct I/O reads.
This commit updates the following:
1. Propogates checksum failures for reads all the way up to the
top-level VDEV.
2. Reports errors through zpool status -d as DIO.
3. Has two zevents for checksum verify errors with Direct I/O. One for
read and one for write.
4. Updates FreeBSD ABD code to also check for ABD_FLAG_FROM_PAGES and
handle ABD buffer contents validation the same as Linux.
5. Updated manipulate_user_buffer.c to also manipulate a buffer while a
Direct I/O read is taking place.
6. Adds a new ZTS test case dio_read_verify that stress tests the new
code.
7. Updated man pages.
8. Added an IMPLY statement to zio_checksum_verify() to make sure that
Direct I/O reads are not issued as speculative.
9. Removed self healing through mirror, raidz, and dRAID VDEVs for
Direct I/O reads.
This issue was first observed when installing a Windows 11 VM on a ZFS
dataset with the dataset property direct set to always. The zpool
devices would report checksum failures, but running a subsequent zpool
scrub would not repair any data and report no errors.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes#16598
Update resilver_restart_001.ksh to restore the default
resilver_defer_percent when the test completes.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: Pavel Snajdr <snajpa@snajpa.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16618
`zvol_rename_minors()` needs to be given the full path not just the
snapshot name. Use code removed in a0bd735ad as a guide
to providing the necessary values.
Add ZTS check for /dev changes after snapshot rename. After
renaming a snapshot with 'snapdev=visible' ensure that the /dev
entries are updated to reflect the rename.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Closes#14223Closes#16600
Restart a resilver from scratch, if the current one in progress is
below a new tunable, zfs_resilver_defer_percent (defaulting to 10%).
The original rationale for deferring additional resilvers, when there is
already one in progress, was to help achieving data redundancy sooner
for the data that gets scanned at the end of the resilver.
But in case the admin wants to attach multiple disks to a single vdev,
it wasn't immediately obvious the admin is supposed to run
`zpool resilver` afterwards to reset the deferred resilvers and start
a new one from scratch.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Closes#15810
In a4b21eadec we added the zap_micro_max_size tuneable to raise the size
at which "micro" (single-block) ZAPs are upgraded to "fat" (multi-block)
ZAPs. Before this, a microZAP was limited to 128KiB, which was the old
largest block size. The side effect of raising the max size past 128KiB
is that it be stored in a large block, requiring the large_blocks
feature.
Unfortunately, this means that a backup stream created without the
--large-block (-L) flag to zfs send would split the microZAP block into
smaller blocks and send those, as is normal behaviour for large blocks.
This would be received correctly, but since microZAPs are limited to the
first block in the object by definition, the entries in the later blocks
would be inaccessible. For directory ZAPs, this gives the appearance of
files being lost.
This commit adds a feature flag, large_microzap, that must be enabled
for microZAPs to grow beyond 128KiB, and which will be activated the
first time that occurs. This feature is later checked when generating
the stream and if active, the send operation will abort unless
--large-block has also been requested.
Changing the limit still requires zap_micro_max_size to be changed. The
state of this flag effectively sets the upper value for this tuneable,
that is, if the feature is disabled, the tuneable will be clamped to
128KiB.
A stream flag is also added to ensure that the receiver also activates
its own feature flag upon receiving the stream. This is not strictly
necessary to _use_ the received microZAP, since it doesn't care how
large its block is, but it is required to send the microZAP object on,
otherwise the original problem occurs again.
Because it's difficult to reliably distinguish a microZAP from a fatZAP
from outside the ZAP code, and because it seems unlikely that most
users are affected (a fairly niche tuneable combined with what should be
an uncommon use of send), and for the sake of expediency, this change
activates the feature the first time a microZAP grows to use a large
block, and is never deactivated after that. This can be improved in the
future.
This commit changes nothing for existing pools that already have large
microZAPs. The feature will not be retroactively applied, but will be
activated the next time a microZAP grows past the limit.
Don't use large_blocks feature for enable/disable tests. The
large_microzap depends on large_blocks, so it gets enabled as a
dependency, breaking the test. Instead use feature "longname", which has
the exact same feature characteristics.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes#16593
In some environments, just making the .zfs control dir hidden from sight
might not be enough. In particular, the following scenarios might
warrant not allowing access at all:
- old snapshots with wrong permissions/ownership
- old snapshots with exploitable setuid/setgid binaries
- old snapshots with sensitive contents
Introducing a new 'disabled' value that not only hides the control dir,
but prevents access to its contents by returning ENOENT solves all of
the above.
The new property value takes advantage of 'iuv' semantics ("ignore
unknown value") to automatically fall back to the old default value when
a pool is accessed by an older version of ZFS that doesn't yet know
about 'disabled' semantics.
I think that technically the zfs_dirlook change is enough to prevent
access, but preventing lookups and dir entries in an already opened .zfs
handle might also be a good idea to prevent races when modifying the
property at runtime.
Add zfs_snapshot_no_setuid parameter to control whether automatically
mounted snapshots have the setuid mount option set or not.
this could be considered a partial fix for one of the scenarios
mentioned in desired.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Co-authored-by: Fabian Grünbichler <f.gruenbichler@proxmox.com>
Closes#3963Closes#16587
This patch adds the ability for zfs to support file/dir name up to 1023
bytes. This number is chosen so we can support up to 255 4-byte
characters. This new feature is represented by the new feature flag
feature@longname.
A new dataset property "longname" is also introduced to toggle longname
support for each dataset individually. This property can be disabled,
even if it contains longname files. In such case, new file cannot be
created with longname but existing longname files can still be looked
up.
Note that, to my knowledge native Linux filesystems don't support name
longer than 255 bytes. So there might be programs not able to work with
longname.
Note that NFS server may needs to use exportfs_get_name to reconnect
dentries, and the buffer being passed is limit to NAME_MAX+1 (256). So
NFS may not work when longname is enabled.
Note, FreeBSD vfs layer imposes a limit of 255 name lengh, so even
though we add code to support it here, it won't actually work.
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes#15921
Specifically, a child in a replacing vdev won't count when assessing
the dtl during a vdev_fault()
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16569
For data integrity checks as done in ZTS, the verification for
unintended data corruption with xxhash128 should be a lot faster
and perfectly usable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16577
Update the test case to freeze the pool then export it to better
simulate a hard failure. This is preferable to copying the vdev
while the pool's imported since with a copy we're not guaranteed
the on-disk state will be consistent. That can in turn result
in a pool import failure and a spurious test failure.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16578
Lower the minimum number of expected deadman events from 4 to 3. All
that is strictly required is a single event to consider the test a
pass. However, since I've never seen a count of less than 3 reported
by the CI that should be sufficient.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16575
Update the test case to freeze the pool then export it to better
simulate a hard failure. This is preferable to copying the vdev
while the pool's imported since with a copy we're not guaranteed
the on-disk state will be consistent. That can in turn result
in a pool import failure and a spurious test failure.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16570
The zpool_reguid tests were not being included the dist tarball
resulting in them not running. This is reported as a "failed
verification" warning by the CI. Add the tests to the correct
Makefile.am.
Additionally, remove the usage of 'bc -e <expr>' from the tests.
This option is only supported by the FreeBSD version of bc.
Update the test case to reflect the 0 is not a valid GUID.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16559
It's the main recommendation to set xattr=sa
even in man pages, so let's set it by default.
xattr=sa don't use feature flag, so in the worst
case we'll have non-readable xattrs by other
non-openzfs platforms.
Non-overridden default `xattr` prop of existing pools
will automatically use `sa` after this commit too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes#15147
The following tests have been observed to occasionally fail when
running under the CI. Updated our exceptions list to track them.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16553
All supported Linux kernels, 4.18 and newer, provide O_TMPFILE.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16553
There is no longer be a need for the ci_reason exception with
the update CI GitHub Actions infrastruture. Retire it.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#16553
In zpool_create.shlib, check_feature_set iterates over all features
mentioned in provided compatibility file to check if only those
features are enabled on the pool.
This commit fixes skipping over comment lines correctly. Otherwise,
the test case fails as comment lines are also treated as feature names
by check_feature_set function.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes#15909
On larger files this should improve the speed.
Sample values of my system:
[mcmilk@xz]$ time dd if=/dev/zero bs=128k count=1k | sha256sum
254bcc3fc4f27172636df4bf32de9f107f620d559b20d760197e452b97453917 -
real 0m1,050s
user 0m0,985s
sys 0m0,153s
[mcmilk@xz]$ time dd if=/dev/zero bs=128k count=1k | openssl sha256 -r
254bcc3fc4f27172636df4bf32de9f107f620d559b20d760197e452b97453917 *stdin
real 0m0,254s
user 0m0,206s
sys 0m0,160s
I think cli_root/zdb/zdb_backup.ksh runs also an FreeBSD and I needed to
include the sysutils/coreutils package for the FreeBSD tests within the
QEMU patchset.
This could be reverted, when this pull request gets upstream
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16543
When multiple drives are throwing errors, it is likely not
a drive failing but rather a failure above the drives, like
a controller. The active cases context of the drive's peers
is now considered when making a diagnosis.
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@klarasystems.com>
Closes#16531
This commit adds functional tests for these systems:
- AlmaLinux 8, AlmaLinux 9, ArchLinux
- CentOS Stream 9, Fedora 39, Fedora 40
- Debian 11, Debian 12
- FreeBSD 13, FreeBSD 14, FreeBSD 15
- Ubuntu 20.04, Ubuntu 22.04, Ubuntu 24.04
- enabled by default:
- AlmaLinux 8, AlmaLinux 9
- Debian 11, Debian 12
- Fedora 39, Fedora 40
- FreeBSD 13, FreeBSD 14
Workflow for each operating system:
- install qemu on the github runner
- download current cloud image of operating system
- start and init that image via cloud-init
- install dependencies and poweroff system
- start system and build openzfs and then poweroff again
- clone build system and start 2 instances of it
- run functional testings and complete in around 3h
- when tests are done, do some logfile preparing
- show detailed results for each system
- in the end, generate the job summary
Real-world benefits from this PR:
1. The github runner scripts are in the zfs repo itself. That means
you can just open a PR against zfs, like "Add Fedora 41 tester", and
see the results directly in the PR. ZFS admins no longer need
manually to login to the buildbot server to update the buildbot config
with new version of Fedora/Almalinux.
2. Github runners allow you to run the entire test suite against your
private branch before submitting a formal PR to openzfs. Just open a
PR against your private zfs repo, and the exact same
Fedora/Alma/FreeBSD runners will fire up and run ZTS. This can be
useful if you want to iterate on a ZTS change before submitting a
formal PR.
3. buildbot is incredibly cumbersome. Our buildbot config files alone
are ~1500 lines (not including any build/setup scripts)!
It's a huge pain to setup.
4. We're running the super ancient buildbot 0.8.12. It's so ancient
it requires python2. We actually have to build python2 from source
for almalinux9 just to get it to run. Ugrading to a more modern
buildbot is a huge undertaking, and the UI on the newer versions is
worse.
5. Buildbot uses EC2 instances. EC2 is a pain because:
* It costs money
* They throttle IOPS and CPU usage, leading to mysterious,
* hard-to-diagnose, failures and timeouts in ZTS.
* EC2 is high maintenance. We have to setup security groups, SSH
* keys, networking, users, etc, in AWS and it's a pain. We also
* have to periodically go in an kill zombie EC2 instances that
* buildbot is unable to kill off.
6. Buildbot doesn't always handle failures well. One of the things we
saw in the past was the FreeBSD builders would often die, and each
builder death would take up a "slot" in buildbot. So we would
periodically have to restart buildbot via a cron job to get the slots
back.
7. This PR divides up the ZTS test list into two parts, launches two
VMs, and on each VM runs half the test suite. The test results are
then merged and shown in the sumary page. So we're basically
parallelizing ZTS on the same github runner. This leads to lower
overall ZTS runtimes (2.5-3 hours vs 4+ hours on buildbot), and one
unified set of results per runner, which is nice.
8. Since the tests are running on a VM, we have much more control over
what happens. We can capture the serial console output even if the
test completely brings down the VM. In the future, we could also
restart the test on the VM where it left off, so that if a single test
panics the VM, we can just restart it and run the remaining ZTS tests
(this functionaly is not yet implemented though, just an idea).
9. Using the runners, users can manually kill or restart a test run
via the github IU. That really isn't possible with buildbot unless
you're an admin.
10. Anecdotally, the tests seem to be more stable and constant under
the QEMU runners.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16537
On load the test needs sometimes a bit more time then just one second.
Doubling the time will help on the QEMU based testings.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16537
Sometimes the pool may start an auto scrub.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes#16537
The test needs some adjusting within the timings.
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Co-authored-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes#16537
Adding O_DIRECT support to ZFS to bypass the ARC for writes/reads.
O_DIRECT support in ZFS will always ensure there is coherency between
buffered and O_DIRECT IO requests. This ensures that all IO requests,
whether buffered or direct, will see the same file contents at all
times. Just as in other FS's , O_DIRECT does not imply O_SYNC. While
data is written directly to VDEV disks, metadata will not be synced
until the associated TXG is synced.
For both O_DIRECT read and write request the offset and request sizes,
at a minimum, must be PAGE_SIZE aligned. In the event they are not,
then EINVAL is returned unless the direct property is set to always (see
below).
For O_DIRECT writes:
The request also must be block aligned (recordsize) or the write
request will take the normal (buffered) write path. In the event that
request is block aligned and a cached copy of the buffer in the ARC,
then it will be discarded from the ARC forcing all further reads to
retrieve the data from disk.
For O_DIRECT reads:
The only alignment restrictions are PAGE_SIZE alignment. In the event
that the requested data is in buffered (in the ARC) it will just be
copied from the ARC into the user buffer.
For both O_DIRECT writes and reads the O_DIRECT flag will be ignored in
the event that file contents are mmap'ed. In this case, all requests
that are at least PAGE_SIZE aligned will just fall back to the buffered
paths. If the request however is not PAGE_SIZE aligned, EINVAL will
be returned as always regardless if the file's contents are mmap'ed.
Since O_DIRECT writes go through the normal ZIO pipeline, the
following operations are supported just as with normal buffered writes:
Checksum
Compression
Encryption
Erasure Coding
There is one caveat for the data integrity of O_DIRECT writes that is
distinct for each of the OS's supported by ZFS.
FreeBSD - FreeBSD is able to place user pages under write protection so
any data in the user buffers and written directly down to the
VDEV disks is guaranteed to not change. There is no concern
with data integrity and O_DIRECT writes.
Linux - Linux is not able to place anonymous user pages under write
protection. Because of this, if the user decides to manipulate
the page contents while the write operation is occurring, data
integrity can not be guaranteed. However, there is a module
parameter `zfs_vdev_direct_write_verify` that controls the
if a O_DIRECT writes that can occur to a top-level VDEV before
a checksum verify is run before the contents of the I/O buffer
are committed to disk. In the event of a checksum verification
failure the write will return EIO. The number of O_DIRECT write
checksum verification errors can be observed by doing
`zpool status -d`, which will list all verification errors that
have occurred on a top-level VDEV. Along with `zpool status`, a
ZED event will be issues as `dio_verify` when a checksum
verification error occurs.
ZVOLs and dedup is not currently supported with Direct I/O.
A new dataset property `direct` has been added with the following 3
allowable values:
disabled - Accepts O_DIRECT flag, but silently ignores it and treats
the request as a buffered IO request.
standard - Follows the alignment restrictions outlined above for
write/read IO requests when the O_DIRECT flag is used.
always - Treats every write/read IO request as though it passed
O_DIRECT and will do O_DIRECT if the alignment restrictions
are met otherwise will redirect through the ARC. This
property will not allow a request to fail.
There is also a module parameter zfs_dio_enabled that can be used to
force all reads and writes through the ARC. By setting this module
parameter to 0, it mimics as if the direct dataset property is set to
disabled.
Reviewed-by: Brian Behlendorf <behlendorf@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Co-authored-by: Mark Maybee <mark.maybee@delphix.com>
Co-authored-by: Matt Macy <mmacy@FreeBSD.org>
Co-authored-by: Brian Behlendorf <behlendorf@llnl.gov>
Closes#10018
The report generator expects the log to be clean and tidy UTF-8. That
can be a problem if you use some of the verbose/debug test runner
options, which sends all sorts of weird output from arbitrary programs
to the log.
This just makes Python a little more relaxed about such things. It
shouldn't matter in practice, as those lines didn't match the test
result regex anyway, and are discarded immediately.
Sponsored-by: https://despairlabs.com/sponsor/
Signed-off-by: Rob Norris <robn@despairlabs.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
This is just a very small attempt to make it more obvious that these
flags aren't optional for libzpool-using programs, by not making it seem
like there's an option to say "well, I don't _want_ to force debugging".
Sponsored-by: Klara, Inc.
Sponsored-by: Wasabi Technology, Inc.
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Rich Ercolani <rincebrain@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Issue #16476Closes#16477
This commit extends the zpool-reguid(8) command with a -g flag, which
allows the user to specify the GUID to set.
This change also adds some general tests for zpool-reguid(8).
Sponsored-by: Wasabi Technology, Inc.
Sponsored-by: Klara, Inc.
Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org>
Reviewed-by: Rob Norris <rob.norris@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
The dedup log does not have a stable cursor, so its not possible to
persist our current scan location within it across pool reloads.
Beccause of this, when walking (scanning), we can't treat it like just
another source of dedup entries.
Instead, when a scan is wanted, we switch to an aggressive flushing
mode, pushing out entries older than the scan start txg as fast as we
can, before starting the scan proper.
Entries after the scan start txg will be handled via other methods; the
DDT ZAPs and logs will be written as normal, and blocks not seen yet
will be offered to the scan machinery as normal.
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
Adds a log/journal to dedup. At the end of txg, instead of writing the
entry directly to the ZAP, instead its adding to an in-memory tree and
appended to an on-disk object. The on-disk object is only read at
import, to reload the in-memory tree.
Lookups first go the the log tree before going to the ZAP, so
recently-used entries will remain close by in memory. This vastly
reduces overhead from dedup IO, as it will not have to do so many
read/update/write cycles on ZAP leaf nodes.
A flushing facility is added at end of txg, to push logged entries out
to the ZAP. There's actually two separate "logs" (in-memory tree and
on-disk object), one active (recieving updated entries) and one flushing
(writing out to disk). These are swapped (ie flushing begins) based on
memory used by the in-memory log trees and time since we last flushed
something.
The flushing facility monitors the amount of entries coming in and being
flushed out, and calibrates itself to try to flush enough each txg to
keep up with the ingest rate without competing too much with other IO.
Multiple tuneables are provided to control the flushing facility.
All the histograms and stats are update to accomodate the log as a
separate entry store. zdb gains knowledge of how to count them and dump
them. Documentation included!
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Sponsored-by: Klara, Inc.
Sponsored-by: iXsystems, Inc.
Closes#15895
