Commit Graph

7314 Commits

Author SHA1 Message Date
Alexander Motin
cfe8e960f1
Fix/improve dbuf hits accounting
Instead of clearing stats inside arc_buf_alloc_impl() do it inside
arc_hdr_alloc() and arc_release().  It fixes statistics being wiped
every time a new dbuf is filled from the ARC.

Remove b_l1hdr.b_l2_hits. L2ARC hits are accounted at b_l2hdr.b_hits.
Since the hits are accounted under hash lock, replace atomics with
simple increments.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12422
2021-08-17 09:50:31 -06:00
Alexander Motin
7f9d9e6f39
Avoid vq_lock drop in vdev_queue_aggregate()
vq_lock is already too congested for two more operations per I/O.
Instead of dropping and reacquiring it inside vdev_queue_aggregate()
delegate the zio_vdev_io_bypass() and zio_execute() calls for parent
I/Os to callers, that drop the lock any way to execute the new I/O.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12297
2021-08-17 09:47:00 -06:00
Alexander Motin
e829a865bf
Use more atomics in refcounts
Use atomic_load_64() for zfs_refcount_count() to prevent torn reads
on 32-bit platforms.  On 64-bit ones it should not change anything.

When built with ZFS_DEBUG but running without tracking enabled use
atomics instead of mutexes same as for builds without ZFS_DEBUG.
Since rc_tracked can't change live we can check it without lock.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12420
2021-08-17 09:44:34 -06:00
Ryan Moeller
5bfc3a99f9
ZTS: Avoid unset $tmpdir in redacted_panic
The redacted_send tests make use of a $tmpdir variable, except in
redacted_send/redacted_panic the variable is never defined.

Use $TEST_BASE_DIR instead.

Clean up the stream file after the test.

Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12455
2021-08-16 16:38:34 -07:00
Allan Jude
e945e8d7f4
Restore FreeBSD sysctl processing for arc.min and arc.max
Before OpenZFS 2.0, trying to set the FreeBSD sysctl vfs.zfs.arc_max
to a disallowed value would return an error.
Since the switch, it instead only generates WARN_IF_TUNING_IGNORED

Keep the ability to set the sysctl's specifically to 0, even though
that is less than the minimum, because some tests depend on this.

Also lost, was the ability to set vfs.zfs.arc_max to a value less
than the default vfs.zfs.arc_min at boot time. Restore this as well.

Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #12161
2021-08-16 09:35:19 -06:00
Ryan Moeller
41bee4039c
zfs: add missed dependency of zfs module on zlib
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Martin Matuska <mm@FreeBSD.org>
Co-authored-by: Konstantin Belousov <kib@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
External-issue: https://reviews.freebsd.org/D31207
Closes #12442
2021-08-13 13:42:45 -07:00
Ryan Moeller
6daf036ab5
Add zfs.sh -r flag to reload modules
zfs.sh already can load and unload, so why not both?

This is convenient when developing changes to the module and you want
to rapidly make some changes, rebuild the module, reload the module,
and test the changes.

Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12450
2021-08-13 13:37:46 -07:00
Ryan Moeller
a7491f9990
Fix usage of find in tests/Makefile.am
The path is not optional on FreeBSD.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12453
2021-08-13 13:13:57 -07:00
Tony Nguyen
6bc61d22c4
Run arc_evict thread at higher priority
Run arc_evict thread at higher priority, nice=0, to give it more CPU
time which can improve performance for workload with high ARC evict
activities.

On mixed read/write and sequential read workloads, I've seen between
10-40% better performance.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Tony Nguyen <tony.nguyen@delphix.com>
Closes #12397
2021-08-10 11:36:26 -06:00
Rich Ercolani
f3678d70ff
Make get_key_material_file fail more verbosely
It turns out, there are a lot of possible reasons for fopen to fail.
Let's share which reason we failed for today.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12410
2021-08-05 17:48:33 -06:00
Brian Behlendorf
ae1e40b329
Enable /proc/diskstats for zvols
The /proc/diskstats accounting needs to be explicitly enabled
for block devices which do not use multi-queue.

Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12440
Closes #12066
2021-08-05 15:35:34 -06:00
George Melikov
e1870be450
Man zpool-scrub.8: describe sequential scrub
Describe sequential scrub and add examples of scrub status.

Reviewed-by: Richard Laager <rlaager@wiktel.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12429
2021-08-05 15:30:28 -06:00
hedongzhang
4357552785
Modify checksum obtain method of QAT
CpaDcGeneratefooter function that obtain the checksum code
does not support the CPA_DC_STATELESS mode. So we get the
adler32 chencksum of the end of the zlib from dc_results.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chengfei Zhu <chengfeix.zhu@intel.com>
Signed-off-by: hedong.zhang <h_d_zhang@163.com>
Closes #12343
2021-08-03 11:46:33 -06:00
Mark Johnston
46b2623586
Allow disabling of unmapped I/O on FreeBSD
We have a tunable which permits one to disable the use of unmapped I/O
for the buffer cache.  Respect it in ZFS as well.  This is useful for
KMSAN, which cannot easily maintain shadow state for unmapped pages.

No functional change intended, as unmapped I/O is permitted by default
and there's no real reason to disable it in practice except for
debugging.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12446
2021-08-02 13:18:24 -06:00
Alexander Motin
7eebcd2be6
Avoid small buffer copying on write
It is wrong for arc_write_ready() to use zfs_abd_scatter_enabled to
decide whether to reallocate/copy the buffer, because the answer is
OS-specific and depends on the buffer size.  Instead of that use
abd_size_alloc_linear(), moved into public header.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Brian Atkinson <batkinson@lanl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12425
2021-07-27 16:05:47 -07:00
Brian Behlendorf
b72611f0f6 Fix format specifier warnings
Commit 5dbf6c5a66 did not address these format specifier warnings
since they were introduced by an unrelated commit which had not
been rebased on 5dbf6c5a66 when merged.  Fix them.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12435
2021-07-27 09:50:00 -07:00
Brian Behlendorf
4bd99c11d7 Remove overlooked __sun_attr__ based macros
The __NORETURN, __CONST, and __PURE macros in the FreeBSD platform
code were based on the __sun_attr__ macro which was removed in
commit 5dbf6c5a6.  This caused a build failure because the
__NORETURN macro was still used in one place in kernel code.
The __CONST and __PURE macros were entirely unused.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12435
2021-07-27 09:49:11 -07:00
George Melikov
9776838cfb Update ABI files with generated in CI worker
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12388
2021-07-26 16:55:18 -07:00
George Melikov
0b072481af storeabi: add no-corpus-path flag
Try to minimize diffs.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12388
2021-07-26 16:54:53 -07:00
Jorgen Lundman
273730d5b5
macOS can also set va_type
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #12357
2021-07-26 16:38:06 -07:00
Jorgen Lundman
02601d8aa4
Move check_file to os/$platform section
Keep check_file_generic() in shared code base, and allow special case
code in check_file() in os section. In future, macOS will have
additional checks in check_file().

Linux and FreeBSD wrappers just calls check_file_generic().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #12385
2021-07-26 16:34:11 -07:00
Alexander Motin
dd3bda39cf
Add comment on metaslab_class_throttle_reserve() locking
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Issue #12314
Closes #12419
2021-07-26 16:30:20 -07:00
John Wren Kennedy
bdd2bfd02c
Assorted fixes for the performance tests
- Bail out early if we're running the perf tests and forget to
  specify disks.
- Allow perf tests to run with any number of disks.
- Remove weekly vs. nightly settings
- Move variables with common values to perf.shlib
- Use zinject to clear the ARC over export/import
- Fix dbuf cache size calculation

When the meaning of `dbuf_cache_max_bytes` changed, the performance
test that covers the dbuf cache started to fail. The test would try to
write files for the test using the max possible size of the cache,
inevitably filling the pool and failing. This change uses
`dbuf_cache_shift` to correctly calculate the dbuf cache size.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: John Kennedy <john.kennedy@delphix.com>
Closes #12408
2021-07-26 15:47:08 -06:00
Matthew Ahrens
d8381f50d6
Read past end of argv array in zpool_do_import()
`zpool_do_import()` passes `argv[0]`, (optionally) `argv[1]`, and
`pool_specified` to `import_pools()`.  If `pool_specified==FALSE`, the
`argv[]` arguments are not used.  However, these values may be off the
end of the `argv[]` array, so loading them could dereference unmapped
memory.  This error is reported by the asan build:

```
=================================================================
==6003==ERROR: AddressSanitizer: heap-buffer-overflow
READ of size 8 at 0x6030000004a8 thread T0
    #0 0x562a078b50eb in zpool_do_import zpool_main.c:3796
    #1 0x562a078858c5 in main zpool_main.c:10709
    #2 0x7f5115231bf6 in __libc_start_main
    #3 0x562a07885eb9 in _start

0x6030000004a8 is located 0 bytes to the right of 24-byte region
allocated by thread T0 here:
    #0 0x7f5116ac6b40 in __interceptor_malloc
    #1 0x562a07885770 in main zpool_main.c:10699
    #2 0x7f5115231bf6 in __libc_start_main
```

This commit passes NULL for these arguments if they are off the end
of the `argv[]` array.

Reviewed-by: George Wilson <gwilson@delphix.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #12339
2021-07-26 12:51:39 -07:00
Václav Skála
31c41aea9c Add missing properties to zfs allow manpage
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Václav Skála <skala@vshosting.cz>
Closes #12402
2021-07-26 12:44:01 -07:00
George Amanakis
ab8a8f0745
Fixes in persistent L2ARC
In l2arc_add_vdev() first decide whether the device is eligible for
L2ARC rebuild or whole device trim and then add it to the list of cache
devices. Otherwise l2arc_feed_thread() might already start writing on
the device invalidating previous content as l2ad_hand = l2ad_start.
However l2arc_rebuild_vdev() needs the device present in the cache
device list to figure out its l2arc_dev_t. Fix this by moving most of
l2arc_rebuild_vdev() in a new function l2arc_rebuild_dev() which does
not need to search in the cache device list.

In contrast to l2arc_add_vdev() we do not have to worry about
l2arc_feed_thread() invalidating previous content when onlining a
cache device. The device parameters (l2ad*) are not cleared when
offlining the device and writing new buffers will not invalidate
all previous content. In worst case only buffers that have not had
their log block written to the device will be lost.

Retire persist_l2arc_00{4,5,8} tests since they cover code already
covered by the remaining ones. Test persist_l2arc_006 is renamed to
persist_l2arc_004 and persist_l2arc_007 is renamed to persist_l2arc_005.

Fix a typo in persist_l2arc_004, and remove an assertion that is not
always true from l2arc_arcstats_pos. Also update an assertion in
persist_l2arc_005 and explain why in a comment.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes #12365
2021-07-26 12:30:24 -07:00
наб
037af3e0d4 Remove NOTE(CONSTCOND) and note.h
These were mostly used to annotate do {} while(0)s

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12201
2021-07-26 12:07:53 -07:00
наб
2c69ba6444 Normalise /*FALLTHR{OUGH,U}*/
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12201
2021-07-26 12:07:39 -07:00
наб
90f1c3c946 Prune /*NOTREACHED*/
This includes a simplification of mkbusy and format correctness in zhack
and ztest

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12201
2021-07-26 12:07:26 -07:00
наб
5dbf6c5a66 Replace /*PRINTFLIKEn*/ with attribute(printf)
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Issue #12201
2021-07-26 12:07:15 -07:00
Mark Johnston
1373709450 Initialize dn_next_type[] in the dnode constructor
It seems nothing ensures that this array is zeroed when a dnode is
freshly allocated, so in principle it retains the values from the
previous allocation.  In practice it seems to be the case that the
fields should end up zeroed, but we can zero the field anyway for
consistency.

This was found using KMSAN.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12383
2021-07-26 11:53:47 -07:00
Mark Johnston
3a185275a0 Zero pad bytes following TX_WRITE log data
When logging a TX_WRITE record in the case where file data has to be
copied from the DMU, we pad the log record size to a multiple of 8
bytes.  In this case, any padding bytes should be zeroed, otherwise the
contents of uninitialized memory are written to the ZIL.

This was found using KMSAN.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12383
2021-07-26 11:53:47 -07:00
Mark Johnston
58714c2817 Zero pad bytes when allocating a ZIL record
When allocating a record, we round up the allocation size to a multiple
of 8.  In this case, any padding bytes should be zeroed, otherwise the
contents of uninitialized memory are written to the ZIL.

This was found using KMSAN.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12383
2021-07-26 11:53:47 -07:00
Mark Johnston
03363b2f86 Initialize all fields in zfs_log_xvattr()
When logging TX_SETATTR, we could otherwise fail to initialize part of
the corresponding ZIL record depending on which fields are present in
the xvattr.  Initialize the creation time and the AV scan timestamp to
zero so that uninitialized bytes are not written to the ZIL.

This was found using KMSAN.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12383
2021-07-26 11:53:47 -07:00
Mark Johnston
da27b8bc7f Initialize "autoreplace" in spa_ld_get_props()
spa_prop_find() may fail to find the specified property, in which case
it suppresses ENOENT from zap_lookup().  In this case, the return value
is left uninitialized, so spa_autoreplace was being initialized using an
uninitialized stack variable.

This was found using KMSAN.  It appears to be a regression from commit
9eb7b46ed0, which removed the initialization of "autoreplace" from the
definition.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Mark Johnston <markj@FreeBSD.org>
Closes #12383
2021-07-26 11:53:47 -07:00
Coleman Kane
1c24bf966c
Linux 5.14 compat: explicity assign set_page_dirty
Kernel 5.14 introduced a change where set_page_dirty of
struct address_space_operations is no longer implicitly set to
__set_page_dirty_buffers(), which ended up resulting in a NULL
pointer deref in the kernel when it is attempted to be called.
This change sets .set_page_dirty in the structure to
__set_page_dirty_nobuffers(), which was introduced with the
related patch set. The breaking change was introduce in commit
0af573780b0b13fceb7fabd49dc1b073cee9a507 to torvalds/linux.git.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #12427
2021-07-26 10:55:55 -07:00
Rich Ercolani
f1ca7999bb
Fix unfortunate NULL in spa_update_dspace
After 1325434b, we can in certain circumstances end up calling
spa_update_dspace with vd->vdev_mg NULL, which ends poorly during
vdev removal.

So let's not do that further space adjustment when we can't.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #12380 
Closes #12428
2021-07-26 10:51:30 -07:00
Brian Behlendorf
1b06b03a7b
Linux 5.14 compat: blk_alloc_disk()
In Linux 5.14, blk_alloc_queue is no longer exported, and its usage
has been superseded by blk_alloc_disk, which returns a gendisk struct
from which we can still retrieve the struct request_queue* that is
needed in the one place where it is used. This also replaces the call
to alloc_disk(minors), and minors is now set via struct member
assignment.

Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Olaf Faaland <faaland1@llnl.gov>
Reviewed-by: Coleman Kane <ckane@colemankane.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #12362 
Closes #12409
2021-07-23 15:28:03 -07:00
Ryan Moeller
14b43fbd9c
zloop: Add a max iterations option, use default run/pass times
It is useful to have control over the number of iterations of zloop so
we can easily produce "x core dumps found *in y iterations*" metrics.

Using random values for run/pass times doesn't improve coverage in a
meaningful way.

Randomizing run time could be seen as a compromise between running a
greater variety of shorter tests versus a smaller variety of longer
tests within a fixed time span.  However, it is not desirable when
running a fixed number of iterations.

Pass time already incorporates randomness within ztest.

Either parameter can be passed to ztest explicitly if the defaults are
not satisfactory.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12411
2021-07-22 15:29:27 -06:00
Alexander Motin
46197dc858
FreeBSD: Ignore make_dev_s() errors
Since errors returned by zvol_create_minor_impl() are ignored by the
common code, it is more convenient to ignore make_dev_s() errors there.
It allows, for example, to get device created for the zvol after later
rename instead of having it further stuck in half-created state.
zvol_rename_minor() already ignores those errors.

While there, switch from MAXPHYS to maxphys in FreeBSD 13+.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12375
2021-07-22 10:22:14 -06:00
Jorgen Lundman
c14ad80fcb
Remove old orig_fd variable from zfs send
Possibly required in the past, but is currently fills no purpose.
Ordinarily such tiny cleanup is not generally worth it, however
on the macOS port, in a future commit, we do unspeakable things to the
"fd" for send/recv, and it would be easier to only have to deal with
one "fd" instead of two.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #12404
2021-07-21 20:22:27 -06:00
Alexander Motin
1b50749ce9
Optimize allocation throttling
Remove mc_lock use from metaslab_class_throttle_*().  The math there
is based on refcounts and so atomic, so the only race possible there
is between zfs_refcount_count() and zfs_refcount_add().  But in most
cases metaslab_class_throttle_reserve() is called with the allocator
lock held, which covers the race.  In cases where the lock is not
held, GANG_ALLOCATION() or METASLAB_MUST_RESERVE are set, and so we
do not use zfs_refcount_count().  And even if we assume some other
non-existing scenario, the worst that may happen from this race is
few more I/Os get to allocation earlier, that is not a problem.

Move locks and data of different allocators into different cache
lines to avoid false sharing.  Group spa_alloc_* arrays together
into single array of aligned struct spa_alloc spa_allocs.  Align
struct metaslab_class_allocator.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Don Brady <don.brady@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12314
2021-07-21 06:40:36 -06:00
George Melikov
bc93935ef0
CI: generate ABI files if changed
So commit author can just download them as
artifacts and commit.

Reviewed-by: Ryan Moeller <ryan@ixsystems.com>
Reviewed-by: John Kennedy <john.kennedy@delphix.com>
Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #12379
2021-07-20 16:21:00 -06:00
Kevin Jin
a7bd20e309
Add Module Parameter Regarding Log Size Limit
* Add Module Parameters Regarding Log Size Limit

zfs_wrlog_data_max
The upper limit of TX_WRITE log data. Once it is reached,
write operation is blocked, until log data is cleared out
after txg sync. It only counts TX_WRITE log with WR_COPIED
or WR_NEED_COPY.

Reviewed-by: Prakash Surya <prakash.surya@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: jxdking <lostking2008@hotmail.com>
Closes #12284
2021-07-20 09:40:24 -06:00
Alexander Motin
8172df643b
Minor ARC optimizations
Remove unneeded global, practically constant, state pointer variables
(arc_anon, arc_mru, etc.), replacing them with macros of real state
variables addresses (&ARC_anon, &ARC_mru, etc.). 

Change ARC_EVICT_ALL from -1ULL to UINT64_MAX, not requiring special
handling in inner loop of ARC reclamation.  Respectively change bytes
argument of arc_evict_state() from int64_t to uint64_t.

Reviewed-by: Matthew Ahrens <mahrens@delphix.com>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Closes #12348
2021-07-20 08:13:21 -06:00
Jorgen Lundman
e04210035e
dmu_redact.c does not call bqueue_destroy
Ensure all calls to bqueue_init() has a corresponding call to bqueue_destroy()

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Co-authored-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Jorgen Lundman <lundman@lundman.net>
Closes #12118
2021-07-20 08:08:45 -06:00
Alexander
23c13c7e80
A few fixes of callback typecasting (for the upcoming ClangCFI)
* zio: avoid callback typecasting
* zil: avoid zil_itxg_clean() callback typecasting
* zpl: decouple zpl_readpage() into two separate callbacks
* nvpair: explicitly declare callbacks for xdr_array()
* linux/zfs_nvops: don't use external iput() as a callback
* zcp_synctask: don't use fnvlist_free() as a callback
* zvol: don't use ops->zv_free() as a callback for taskq_dispatch()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Mark Maybee <mark.maybee@delphix.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Closes #12260
2021-07-20 08:03:33 -06:00
Ryan Moeller
65b9293641
Use SET_ERROR for more errors in FreeBSD vnops
We should use SET_ERROR when we first get an error.

Add it in the FreeBSD xattr implementations where missing.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12356
2021-07-19 10:52:50 -06:00
Ryan Moeller
de12cd2511
Remove unused fields from zvol_task_t
We don't use or need the pool name or value source in the zvol tasks.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes #12361
2021-07-19 10:02:35 -06:00
Alexander Motin
eecceeae9f
FreeBSD: Switch from MAXPHYS to maxphys on FreeBSD 13+
Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes #12378
2021-07-19 09:56:58 -06:00