Commit Graph

36 Commits

Author SHA1 Message Date
George Wilson
f3a7f6610f Illumos 4976-4984 - metaslab improvements
4976 zfs should only avoid writing to a failing non-redundant top-level vdev
4978 ztest fails in get_metaslab_refcount()
4979 extend free space histogram to device and pool
4980 metaslabs should have a fragmentation metric
4981 remove fragmented ops vector from block allocator
4982 space_map object should proactively upgrade when feature is enabled
4983 need to collect metaslab information via mdb
4984 device selection should use fragmentation metric
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4976
  https://www.illumos.org/issues/4978
  https://www.illumos.org/issues/4979
  https://www.illumos.org/issues/4980
  https://www.illumos.org/issues/4981
  https://www.illumos.org/issues/4982
  https://www.illumos.org/issues/4983
  https://www.illumos.org/issues/4984
  https://github.com/illumos/illumos-gate/commit/2e4c998

Notes:
    The "zdb -M" option has been re-tasked to display the new metaslab
    fragmentation metric and the new "zdb -I" option is used to control
    the maximum number of in-flight I/Os.

    The new fragmentation metric is derived from the space map histogram
    which has been rolled up to the vdev and pool level and is presented
    to the user via "zpool list".

    Add a number of module parameters related to the new metaslab weighting
    logic.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2595
2014-08-18 08:40:49 -07:00
Turbo Fredriksson
f67d709080 Create an 'overlay' property
Add a new 'overlay' property (default 'off') that controls whether the
filesystem should be mounted even if the mountpoint is busy or if it
should fail with a 'mountpoint not empty'.

Doing overlay mounts is the default mount behavior on Linux, but not
in ZFS. It have been decided that following the ZFS behavior should
be the default, but this overlay allows for site administrator to
override this decision on a per-dataset basis.

Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes: #2503
2014-08-15 13:39:19 -07:00
Matthew Ahrens
fbeddd60b7 Illumos 4390 - I/O errors can corrupt space map when deleting fs/vol
4390 i/o errors when deleting filesystem/zvol can lead to space map corruption
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4390
  https://github.com/illumos/illumos-gate/commit/7fd05ac

Porting notes:

Previous stack-reduction efforts in traverse_visitb() caused a fair
number of un-mergable pieces of code.  This patch should reduce its
stack footprint a bit more.

The new local bptree_entry_phys_t in bptree_add() is dynamically-allocated
using kmem_zalloc() for the purpose of stack reduction.

The new global zfs_free_leak_on_eio has been defined as an integer
rather than a boolean_t as was the case with the related zfs_recover
global.  Also, zfs_free_leak_on_eio's definition has been inserted into
zfs_debug.c for consistency with the existing definition of zfs_recover.
Illumos placed it in spa_misc.c.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2545
2014-08-04 11:50:52 -07:00
Matthew Ahrens
faf0f58c69 Illumos 3835 zfs need not store 2 copies of all metadata
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

Description from Matt Ahrens's bug report at Delphix:

    Add a new zfs property, "redundant_metadata" which can have values
    "all" or "most".  The default will be "all", which is the current
    behavior.  Setting to "most" will cause us to only store 1 copy of
    level-1 indirect blocks of user data files.

Additional notes:

    The new man page section for this property states

        "The exact behavior of which metadata blocks
         are stored redundantly may change in future releases."

    and:

        "When set to most, ZFS stores an extra copy of most types of
         metadata. This can improve performance of random writes,
         because less metadata must be written."

    The current implementation is as described above in Matt's blog.
    It is controlled by a new global integer
    "zfs_redundant_metadata_most_ditto_level", currently initialized
    to 2. When "redundant_metadata" is set to "most", only indirect
    blocks of the specified level and higher will have additional ditto
    blocks created.

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2542
2014-07-31 09:49:34 -07:00
Matthew Ahrens
da536844d5 Illumos 4368, 4369.
4369 implement zfs bookmarks
4368 zfs send filesystems from readonly pools
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/4369
  https://www.illumos.org/issues/4368
  https://github.com/illumos/illumos-gate/commit/78f1710

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2530
2014-07-29 10:55:29 -07:00
Tim Chase
962d524212 Check the dataset type more rigorously when fetching properties.
When fetching property values of snapshots, a check against the head
dataset type must be performed.  Previously, this additional check was
performed only when fetching "version", "normalize", "utf8only" or "case".

This caused the ZPL properties "acltype", "exec", "devices", "nbmand",
"setuid" and "xattr" to be erroneously displayed with meaningless values
for snapshots of volumes.  It also did not allow for the display of
"volsize" of a snapshot of a volume.

This patch adds the headcheck flag paramater to zfs_prop_valid_for_type()
and zprop_valid_for_type() to indicate the check is being done
against a head dataset's type in order that properties valid only for
snapshots are handled correctly.  This allows the the head check in
get_numeric_property() to be performed when fetching a property for
a snapshot.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2265
2014-05-06 10:41:46 -07:00
Brian Behlendorf
75e3ff58fe Add zpool_events_seek() functionality
The ZFS_IOC_EVENTS_SEEK ioctl was added to allow user space callers
to seek around the zevent file descriptor by EID.  When a specific
EID is passed and it exists the cursor will be positioned there.
If the EID is no longer cached by the kernel ENOENT is returned.
The caller may also pass ZEVENT_SEEK_START or ZEVENT_SEEK_END to seek
to those respective locations.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Issue #2
2014-03-31 16:10:57 -07:00
Richard Yao
26b42f3f9d Implement -t option to zpool import for temporary pool names
Originally, users had to handle spa namespace collisions by either
exporting the already imported pool or by specifying a new name for the
pool with a conflicting name. In the case of root pools from virtual
guests, neither approach to collision resolution is reasonable. This is
addressed by extending the new name syntax with a -t option to specify
that the new name is temporary. When specified, this sets an internal
flag that is passed into the kernel to tell it that all label updates
should refer to the name used in the original label. Consequently, the
original pool name will be retained on export.

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2189
2014-03-20 12:05:30 -07:00
Richard Yao
4f2dcb3eee Add erratum for issue #2094
ZoL commit 1421c89 unintentionally changed the disk format in a forward-
compatible, but not backward compatible way. This was accomplished by
adding an entry to zbookmark_t, which is included in a couple of
on-disk structures. That lead to the creation of pools with incorrect
dsl_scan_phys_t objects that could only be imported by versions of ZoL
containing that commit.  Such pools cannot be imported by other versions
of ZFS or past versions of ZoL.

The additional field has been removed by the previous commit.  However,
affected pools must be imported and scrubbed using a version of ZoL with
this commit applied.  This will return the pools to a state in which they
may be imported by other implementations.

The 'zpool import' or 'zpool status' command can be used to determine if
a pool is impacted.  A message similar to one of the following means your
pool must be scrubbed to restore compatibility.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #1 detected.
 action: The pool can be imported using its name or numeric identifier,
         however there is a compatibility issue which should be corrected
         by running 'zpool scrub'
    see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

$ zpool status
  pool: zol-0.6.2-173
 state: ONLINE
  scan: pool compatibility issue detected.
   see: https://github.com/zfsonlinux/zfs/issues/2094
action: To correct the issue run 'zpool scrub'.
config:
...

If there was an async destroy in progress 'zpool import' will prevent
the pool from being imported.  Further advice on how to proceed will be
provided by the error message as follows.

$ zpool import
   pool: zol-0.6.2-173
     id: 1165955789558693437
  state: ONLINE
 status: Errata #2 detected.
 action: The pool can not be imported with this version of ZFS due to an
         active asynchronous destroy.  Revert to an earlier version and
         allow the destroy to complete before updating.
         see: http://zfsonlinux.org/msg/ZFS-8000-ER
 config:
 ...

Pools affected by the damaged dsl_scan_phys_t can be detected prior to
an upgrade by running the following command as root:

zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w

Note that `poolname` must be replaced with the name of the pool you wish
to check. A value of 25 indicates the dsl_scan_phys_t has been damaged.
A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0
indicates that there has never been a scrub run on the pool.

The regression caused by the change to zbookmark_t never made it into a
tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL
stable respositorys.  Only those using the HEAD version directly from
Github after the 0.6.2 but before the 0.6.3 tag are affected.

This patch does have one limitation that should be mentioned.  It will not
detect errata #2 on a pool unless errata #1 is also present.  It expected
this will not be a significant problem because pools impacted by errata #2
have a high probably of being impacted by errata #1.

End users can ensure they do no hit this unlikely case by waiting for all
asynchronous destroy operations to complete before updating ZoL.  The
presence of any background destroys on any imported pools can be checked
by running `zpool get freeing` as root.  This will display a non-zero
value for any pool with an active asynchronous destroy.

Lastly, it is expected that no user data has been lost as a result of
this erratum.

Original-patch-by: Tim Chase <tim@chase2k.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2094
2014-02-21 12:10:40 -08:00
Brian Behlendorf
ffe9d38275 Add generic errata infrastructure
From time to time it may be necessary to inform the pool administrator
about an errata which impacts their pool.  These errata will by shown
to the administrator through the 'zpool status' and 'zpool import'
output as appropriate.  The errata must clearly describe the issue
detected, how the pool is impacted, and what action should be taken
to resolve the situation.  Additional information for each errata will
be provided at http://zfsonlinux.org/msg/ZFS-8000-ER.

To accomplish the above this patch adds the required infrastructure to
allow the kernel modules to notify the utilities that an errata has
been detected.  This is done through the ZPOOL_CONFIG_ERRATA uint64_t
which has been added to the pool configuration nvlist.

To add a new errata the following changes must be made:

* A new errata identifier must be assigned by adding a new enum value
  to the zpool_errata_t type.  New enums must be added to the end to
  preserve the existing ordering.

* Code must be added to detect the issue.  This does not strictly
  need to be done at pool import time but doing so will make the
  errata visible in 'zpool import' as well as 'zpool status'.  Once
  detected the spa->spa_errata member should be set to the new enum.

* If possible code should be added to clear the spa->spa_errata member
  once the errata has been resolved.

* The show_import() and status_callback() functions must be updated
  to include an informational message describing the errata.  This
  should include an action message describing what an administrator
  should do to address the errata.

* The documentation at http://zfsonlinux.org/msg/ZFS-8000-ER must be
  updated to describe the errata.  This space can be used to provide
  as much additional information as needed to fully describe the errata.
  A link to this documentation will be automatically generated in the
  output of 'zpool import' and 'zpool status'.

Original-idea-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Richard Yao <ryao@gentoo.or
Issue #2094
2014-02-21 12:10:40 -08:00
Tim Chase
6d111134c0 Implement relatime.
Add the "relatime" property.  When set to "on", a file's atime will only
be updated if the existing atime at least a day old or if the existing
ctime or mtime has been updated since the last access.  This behavior
is compatible with the Linux "relatime" mount option.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2064
Closes #1917
2014-01-29 15:50:44 -08:00
Matthew Thode
11b9ec23b9 Add full SELinux support
Four new dataset properties have been added to support SELinux.  They
are 'context', 'fscontext', 'defcontext' and 'rootcontext' which map
directly to the context options described in mount(8).  When one of
these properties is set to something other than 'none'.  That string
will be passed verbatim as a mount option for the given context when
the filesystem is mounted.

For example, if you wanted the rootcontext for a filesystem to be set
to 'system_u:object_r:fs_t' you would set the property as follows:

  $ zfs set rootcontext="system_u:object_r:fs_t" storage-pool/media

This will ensure the filesystem is automatically mounted with that
rootcontext.  It is equivalent to manually specifying the rootcontext
with the -o option like this:

  $ zfs mount -o rootcontext=system_u:object_r:fs_t storage-pool/media

By default all four contexts are set to 'none'.  Further information
on SELinux contexts is detailed in mount(8) and selinux(8) man pages.

Signed-off-by: Matthew Thode <prometheanfire@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes #1504
2013-12-19 10:37:31 -08:00
Michael Kjorling
d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1821
2013-12-18 16:46:35 -08:00
Brian Behlendorf
2e0358cbca Sync /dev/zfs ioctl ordering
In order to minimize any future disruption caused by the addition
and removal /dev/zfs ioctls this patch makes the following changes.

1) Sync ZoL's ioctl ordering such that it matches Illumos.  For
   historic reasons the ZFS_IOC_DESTROY_SNAPS and ZFS_IOC_POOL_REGUID
   ioctls were out of order.

2) Move Linux and FreeBSD specific ioctls in to their own reserved
   ranges.  This allows us to preserve the existing ordering when
   new ioctls are added by either Illumos or FreeBSD.  When an
   ioctl is no longer needed it should be retired in place.

This change alters the ZFS user/kernel ABI so make sure you rebuild
both your user and kernel modules.  However, it should allow for a
much stabler interface going forward.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #1973
2013-12-16 09:41:39 -08:00
Brian Behlendorf
ba6a24026c Remove ZFC_IOC_*_MINOR ioctl()s
Early versions of ZFS coordinated the creation and destruction
of device minors from userspace.  This was inherently racy and
in late 2009 these ioctl()s were removed leaving everything up
to the kernel.  This significantly simplified the code.

However, we never picked up these changes in ZoL since we'd
already significantly adjusted this code for Linux.  This patch
aims to rectify that by finally removing ZFC_IOC_*_MINOR ioctl()s
and moving all the functionality down in to the kernel.  Since
this cleanup will change the kernel/user ABI it's being done
in the same tag as the previous libzfs_core ABI changes.  This
will minimize, but not eliminate, the disruption to end users.

Once merged ZoL, Illumos, and FreeBSD will basically be back
in sync in regards to handling ZVOLs in the common code.  While
each platform must have its own custom zvol.c implemenation the
interfaces provided are consistent.

NOTES:

1) This patch introduces one subtle change in behavior which
   could not be easily avoided.  Prior to this change callers
   of 'zfs create -V ...' were guaranteed that upon exit the
   /dev/zvol/ block device link would be created or an error
   returned.  That's no longer the case.  The utilities will no
   longer block waiting for the symlink to be created.  Callers
   are now responsible for blocking, this is why a 'udev_wait'
   call was added to the 'label' function in scripts/common.sh.

2) The read-only behavior of a ZVOL now solely depends on if
   the ZVOL_RDONLY bit is set in zv->zv_flags.  The redundant
   policy setting in the gendisk structure was removed.  This
   both simplifies the code and allows us to safely leverage
   set_disk_ro() to issue a KOBJ_CHANGE uevent.  See the
   comment in the code for futher details on this.

3) Because __zvol_create_minor() and zvol_alloc() may now be
   called in a sync task they must use KM_PUSHPAGE.

References:
  illumos/illumos-gate@681d9761e8

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #1969
2013-12-16 09:15:57 -08:00
George Wilson
5d1f7fb647 Illumos #3956, #3957, #3958, #3959, #3960, #3961, #3962
3956 ::vdev -r should work with pipelines
3957 ztest should update the cachefile before killing itself
3958 multiple scans can lead to partial resilvering
3959 ddt entries are not always resilvered
3960 dsl_scan can skip over dedup-ed blocks if physical birth != logical birth
3961 freed gang blocks are not resilvered and can cause pool to suspend
3962 ztest should print out zfs debug buffer before exiting
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3956
  https://www.illumos.org/issues/3957
  https://www.illumos.org/issues/3958
  https://www.illumos.org/issues/3959
  https://www.illumos.org/issues/3960
  https://www.illumos.org/issues/3961
  https://www.illumos.org/issues/3962
  illumos/illumos-gate@b4952e17e8

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting notes:

1. zfs_dbgmsg_print() is only used in userland. Since we do not have
   mdb on Linux, it does not make sense to make it available in the
   kernel. This means that a build failure will occur if any future
   kernel patch depends on it. However, that is unlikely given that
   this functionality was added to support zdb.

2. zfs_dbgmsg_print() is only invoked for -VVV or greater log levels.
   This preserves the existing behavior of minimal noise when running
   with -V, and -VV.

3. In vdev_config_generate() the call to nvlist_alloc() was not
   changed to fnvlist_alloc() because we must pass KM_PUSHPAGE in
   the txg_sync context.
2013-11-05 12:23:05 -08:00
Keith M Wesolowski
96c2e96193 Illumos #3894
3894 zfs should not allow snapshot of inconsistent dataset
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  https://www.illumos.org/issues/3894
  illumos/illumos-gate@ca48f36f20

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
2013-11-04 11:18:14 -08:00
Matthew Ahrens
24a64651b4 Illumos #3588
3588 provide zfs properties for logical (uncompressed) space
     used and referenced
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@dey-sys.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/3588
  illumos/illumos-gate@77372cb0f3

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-10-31 10:16:11 -07:00
Massimo Maggi
023699cd62 Posix ACL Support
This change adds support for Posix ACLs by storing them as an xattr
which is common practice for many Linux file systems.  Since the
Posix ACL is stored as an xattr it will not overwrite any existing
ZFS/NFSv4 ACLs which may have been set.  The Posix ACL will also
be non-functional on other platforms although it may be visible
as an xattr if that platform understands SA based xattrs.

By default Posix ACLs are disabled but they may be enabled with
the new 'aclmode=noacl|posixacl' property.  Set the property to
'posixacl' to enable them.  If ZFS/NFSv4 ACL support is ever added
an appropriate acltype will be added.

This change passes the POSIX Test Suite cleanly with the exception
of xacl/00.t test 45 which is incorrect for Linux (Ext4 fails too).

  http://www.tuxera.com/community/posix-test-suite/

Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #170
2013-10-29 14:54:26 -07:00
Matthew Ahrens
6f1ffb0665 Illumos #2882, #2883, #2900
2882 implement libzfs_core
2883 changing "canmount" property to "on" should not always remount dataset
2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2882
  https://www.illumos.org/issues/2883
  https://www.illumos.org/issues/2900
  illumos/illumos-gate@4445fffbbb

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1293

Porting notes:

WARNING: This patch changes the user/kernel ABI.  That means that
the zfs/zpool utilities built from master are NOT compatible with
the 0.6.2 kernel modules.  Ensure you load the matching kernel
modules from master after updating the utilities.  Otherwise the
zfs/zpool commands will be unable to interact with your pool and
you will see errors similar to the following:

  $ zpool list
  failed to read pool configuration: bad address
  no pools available

  $ zfs list
  no datasets available

Add zvol minor device creation to the new zfs_snapshot_nvl function.

Remove the logging of the "release" operation in
dsl_dataset_user_release_sync().  The logging caused a null dereference
because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the
logging functions try to get the ds name via the dsl_dataset_name()
function. I've got no idea why this particular code would have worked
in Illumos.  This code has subsequently been completely reworked in
Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring).

Squash some "may be used uninitialized" warning/erorrs.

Fix some printf format warnings for %lld and %llu.

Apply a few spa_writeable() changes that were made to Illumos in
illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and
3115 fixes.

Add a missing call to fnvlist_free(nvl) in log_internal() that was added
in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time
(zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-09-04 15:49:00 -07:00
Shen Yan
e77aa730bc Fix the comment in zfs.h
The path to code is also changed in zfsonlinux.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issues #1566
2013-07-09 10:41:18 -07:00
Eric Dillmann
0b4d1b5853 Add snapdev=[hidden|visible] dataset property
The new snapdev dataset property may be set to control the
visibility of zvol snapshot devices.  By default this value
is set to 'hidden' which will prevent zvol snapshots from
appearing under /dev/zvol/ and /dev/<dataset>/.  When set to
'visible' all zvol snapshots for the dataset will be visible.

This functionality was largely added because when automatic
snapshoting is enabled large numbers of read-only zvol snapshots
will be created.  When creating these devices the kernel will
attempt to read their partition tables, and blkid will attempt
to identify any filesystems on those partitions.  This leads
to a variety of issues:

1) The zvol partition tables will be read in the context of
   the `modprobe zfs` for automatically imported pools.  This
   is undesirable and should be done asynchronously, but for
   now reducing the number of visible devices helps.

2) Udev expects to be able to complete its work for a new
   block devices fairly quickly.  When many zvol devices are
   added at the same time this is no longer be true.  It can
   lead to udev timeouts and missing /dev/zvol links.

3) Simply having lots of devices in /dev/ can be aukward from
   a management standpoint.  Hidding the devices your unlikely
   to ever use helps with this.  Any snapshot device which is
   needed can be made visible by changing the snapdev property.

NOTE: This patch changes the default behavior for zvols which
      was effectively 'snapdev=visible'.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1235
Closes #945
Issue #956
Issue #756
2013-03-05 12:37:54 -08:00
Christopher Siden
b9b24bb4ca Illumos #2762: zpool command should have better support for feature flags
2762 zpool command should have better support for feature flags
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@57221772c3
  https://www.illumos.org/issues/2762

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:43 -08:00
George Wilson
3bc7e0fb0f Illumos #3090 and #3102
3090 vdev_reopen() during reguid causes vdev to be treated as corrupt
3102 vdev_uberblock_load() and vdev_validate() may read the wrong label

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@dfbb943217
  illumos changeset: 13777:b1e53580146d
  https://www.illumos.org/issues/3090
  https://www.illumos.org/issues/3102

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #939
2013-01-08 10:35:42 -08:00
Christopher Siden
9ae529ec5d Illumos #2619 and #2747
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@53089ab7c8
  illumos/illumos-gate@ad135b5d64
  illumos changeset: 13700:2889e2596bd6
  https://www.illumos.org/issues/2619
  https://www.illumos.org/issues/2747

NOTE: The grub specific changes were not ported.  This change
must be made to the Linux grub packages.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:35 -08:00
Bill Pijewski
37abac6d55 Illumos #2703: add mechanism to report ZFS send progress
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2703

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-19 13:39:06 -07:00
Chris Siden
1bd201e70d Illumos #1948: zpool list should show more detailed pool info
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  https://www.illumos.org/issues/1948

Ported by:	Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #685
2012-09-19 13:39:05 -07:00
Dan McDonald
d96eb2b153 Illumos #1693: persistent 'comment' field for a zpool
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1693

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #678
2012-08-08 11:49:37 -07:00
Matthew Ahrens
330d06f90d Illumos #1644, #1645, #1646, #1647, #1708
1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by
     destroying multiple snapshots
1708 adjust size of zpool history data

References:
  https://www.illumos.org/issues/1644
  https://www.illumos.org/issues/1645
  https://www.illumos.org/issues/1646
  https://www.illumos.org/issues/1647
  https://www.illumos.org/issues/1708

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  This change has reordered
all of the new ioctl()s to the end of the list.  This should
help minimize this issue in the future.

Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Albert Lee <trisk@opensolaris.org>
Approved by: Garrett D'Amore <garret@nexenta.com>

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #826
Closes #664
2012-07-31 09:25:30 -07:00
Garrett D'Amore
3541dc6d02 Illumos #1748: desire support for reguid in zfs
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1748

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.

Ported by:     Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #665
2012-07-11 13:08:56 -07:00
Brian Behlendorf
82a37189aa Implement SA based xattrs
The current ZFS implementation stores xattrs on disk using a hidden
directory.  In this directory a file name represents the xattr name
and the file contexts are the xattr binary data.  This approach is
very flexible and allows for arbitrarily large xattrs.  However,
it also suffers from a significant performance penalty.  Accessing
a single xattr can requires up to three disk seeks.

  1) Lookup the dnode object.
  2) Lookup the dnodes's xattr directory object.
  3) Lookup the xattr object in the directory.

To avoid this performance penalty Linux filesystems such as ext3
and xfs try to store the xattr as part of the inode on disk.  When
the xattr is to large to store in the inode then a single external
block is allocated for them.  In practice most xattrs are small
and this approach works well.

The addition of System Attributes (SA) to zfs provides us a clean
way to make this optimization.  When the dataset property 'xattr=sa'
is set then xattrs will be preferentially stored as System Attributes.
This allows tiny xattrs (~100 bytes) to be stored with the dnode and
up to 64k of xattrs to be stored in the spill block.  If additional
xattr space is required, which is unlikely under Linux, they will be
stored using the traditional directory approach.

This optimization results in roughly a 3x performance improvement
when accessing xattrs which brings zfs roughly to parity with ext4
and xfs (see table below).  When multiple xattrs are stored per-file
the performance improvements are even greater because all of the
xattrs stored in the spill block will be cached.

However, by default SA based xattrs are disabled in the Linux port
to maximize compatibility with other implementations.  If you do
enable SA based xattrs then they will not be visible on platforms
which do not support this feature.

----------------------------------------------------------------------
   Time in seconds to get/set one xattr of N bytes on 100,000 files
------+--------------------------------+------------------------------
      |            setxattr            |            getxattr
bytes |  ext4     xfs zfs-dir  zfs-sa  |  ext4     xfs zfs-dir  zfs-sa
------+--------------------------------+------------------------------
1     |  2.33   31.88   21.50    4.57  |  2.35    2.64    6.29    2.43
32    |  2.79   30.68   21.98    4.60  |  2.44    2.59    6.78    2.48
256   |  3.25   31.99   21.36    5.92  |  2.32    2.71    6.22    3.14
1024  |  3.30   32.61   22.83    8.45  |  2.40    2.79    6.24    3.27
4096  |  3.57  317.46   22.52   10.73  |  2.78   28.62    6.90    3.94
16384 |   n/a 2342.39   34.30   19.20  |   n/a   45.44  145.90    7.55
65536 |   n/a 2941.39  128.15  131.32* |   n/a  141.92  256.85  262.12*

Legend:
* ext4      - Stock RHEL6.1 ext4 mounted with '-o user_xattr'.
* xfs       - Stock RHEL6.1 xfs mounted with default options.
* zfs-dir   - Directory based xattrs only.
* zfs-sa    - Prefer SAs but spill in to directories as needed, a
              trailing * indicates overflow in to directories occured.

NOTE: Ext4 supports 4096 bytes of xattr name/value pairs per file.
NOTE: XFS and ZFS have no limit on xattr name/value pairs per file.
NOTE: Linux limits individual name/value pairs to 65536 bytes.
NOTE: All setattr/getattr's were done after dropping the cache.
NOTE: All tests were run against a single hard drive.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #443
2011-11-28 15:45:51 -08:00
Matt Ahrens
f5fc4acaa7 Illumos #1092: zfs refratio property
Add a "REFRATIO" property, which is the compression ratio based on
data referenced. For snapshots, this is the same as COMPRESSRATIO,
but for filesystems/volumes, the COMPRESSRATIO is based on the
data "USED" (ie, includes blocks in children, but not blocks
shared with the origin).

This is needed to figure out how much space a filesystem would
use if it were not compressed (ignoring snapshots).

Reviewed by: George Wilson <George.Wilson@delphix.com>
Reviewed by: Adam Leventhal <Adam.Leventhal@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Mark Musante <Mark.Musante@oracle.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>

References to Illumos issue and patch:
- https://www.illumos.org/issues/1092
- https://github.com/illumos/illumos-gate/commit/187d6ac08a

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #340
2011-08-01 12:09:11 -07:00
Christian Kohlschütter
df30f56639 Add "ashift" property to zpool create
Some disks with internal sectors larger than 512 bytes (e.g., 4k) can
suffer from bad write performance when ashift is not configured
correctly.  This is caused by the disk not reporting its actual sector
size, but a sector size of 512 bytes.  The drive may behave this way
for compatibility reasons.  For example, the WDC WD20EARS disks are
known to exhibit this behavior.

When creating a zpool, ZFS takes that wrong sector size and sets the
"ashift" property accordingly (to 9: 1<<9=512), whereas it should be
set to 12 for 4k sectors (1<<12=4096).

This patch allows an adminstrator to manual specify the known correct
ashift size at 'zpool create' time.  This can significantly improve
performance in certain cases.  However, it will have an impact on your
total pool capacity.  See the updated ashift property description
in the zpool.8 man page for additional details.

Valid values for the ashift property range from 9 to 17 (512B-128KB).
Additionally, you may set the ashift to 0 if you wish to auto-detect
the sector size based on what the disk reports, this is the default
behavior.  The most common ashift values are 9 and 12.

  Example:
  zpool create -o ashift=12 tank raidz2 sda sdb sdc sdd

Closes #280

Original-patch-by: Richard Laager <rlaager@wiktel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-06-17 16:35:49 -07:00
Fajar A. Nugraha
a5729f7b22 Fixes to enable zvol symlink creation
This commit fixes issue on
https://github.com/behlendorf/zfs/issues/#issue/172
Changes:
- update BLKZNAME to use _IOR instead of _IO.  Kernel 2.6.32 allows
read parameters (copy_to_user) with _IO, while newer kernels (tested
Archlinux's 2.6.37 kernel) enforces _IOR (which is correct)
- fix return code and message on error

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-03-24 11:48:18 -07:00
Fajar A. Nugraha
4c0d8e50b9 Use udev to create /dev/zvol/[dataset_name] links
This commit allows zvols with names longer than 32 characters, which
fixes issue on https://github.com/behlendorf/zfs/issues/#issue/102.

Changes include:
- use /dev/zd* device names for zvol, where * is the device minor
  (include/sys/fs/zfs.h, module/zfs/zvol.c).
- add BLKZNAME ioctl to get dataset name from userland
  (include/sys/fs/zfs.h, module/zfs/zvol.c, cmd/zvol_id).
- add udev rule to create /dev/zvol/[dataset_name] and the legacy
  /dev/[dataset_name] symlink. For partitions on zvol, it will create
  /dev/zvol/[dataset_name]-part* (etc/udev/rules.d/60-zvol.rules,
  cmd/zvol_id).

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2011-02-25 09:43:19 -08:00
Brian Behlendorf
6283f55ea1 Support custom build directories and move includes
One of the neat tricks an autoconf style project is capable of
is allow configurion/building in a directory other than the
source directory.  The major advantage to this is that you can
build the project various different ways while making changes
in a single source tree.

For example, this project is designed to work on various different
Linux distributions each of which work slightly differently.  This
means that changes need to verified on each of those supported
distributions perferably before the change is committed to the
public git repo.

Using nfs and custom build directories makes this much easier.
I now have a single source tree in nfs mounted on several different
systems each running a supported distribution.  When I make a
change to the source base I suspect may break things I can
concurrently build from the same source on all the systems each
in their own subdirectory.

wget -c http://github.com/downloads/behlendorf/zfs/zfs-x.y.z.tar.gz
tar -xzf zfs-x.y.z.tar.gz
cd zfs-x-y-z

------------------------- run concurrently ----------------------
<ubuntu system>  <fedora system>  <debian system>  <rhel6 system>
mkdir ubuntu     mkdir fedora     mkdir debian     mkdir rhel6
cd ubuntu        cd fedora        cd debian        cd rhel6
../configure     ../configure     ../configure     ../configure
make             make             make             make
make check       make check       make check       make check

This change also moves many of the include headers from individual
incude/sys directories under the modules directory in to a single
top level include directory.  This has the advantage of making
the build rules cleaner and logically it makes a bit more sense.
2010-09-08 12:38:56 -07:00