The list_link_replace() function with swap a new item it to the place
of an old item in a list. It is the callers responsibility to ensure
all lists involved are locked properly.
At some point we are going to need to implement the kmem cache
move callbacks to allow for kmem cache defragmentation. This
commit simply lays a small part of the API ground work, it does
not actually implement any of this feature. This is safe for
now because the move callbacks are just an optimization. Even
if they are registered we don't ever really have to call them.
These functions were not previous needed so they were not added.
Now they are so add the full set.
atomic_inc_32_nv()
atomic_dec_32_nv()
atomic_inc_64_nv()
atomic_dec_64_nv()
Unless __GFP_IO and __GFP_FS are removed from the file mapping gfp
mask we may enter memory reclaim during IO. In this case shrink_slab()
entered another file system which is notoriously hungry for stack.
This additional stack usage may cause a stack overflow. This patch
removes __GFP_IO and __GFP_FS from the mapping gfp mask of each file
during vn_open() to avoid any reclaim in the vn_rdwr() IO path. The
original mask is then restored at vn_close() time. Hats off to the
loop driver which does something similiar for the same reason.
[...]
shrink_slab+0xdc/0x153
try_to_free_pages+0x1da/0x2d7
__alloc_pages+0x1d7/0x2da
do_generic_mapping_read+0x2c9/0x36f
file_read_actor+0x0/0x145
__generic_file_aio_read+0x14f/0x19b
generic_file_aio_read+0x34/0x39
do_sync_read+0xc7/0x104
vfs_read+0xcb/0x171
:spl:vn_rdwr+0x2b8/0x402
:zfs:vdev_file_io_start+0xad/0xe1
[...]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
A race condition in rwsem_is_locked() was fixed in Linux 2.6.33 and the fix was
backported to RHEL5 as of kernel 2.6.18-190.el5. Details can be found here:
https://bugzilla.redhat.com/show_bug.cgi?id=526092
The race condition was fixed in the kernel by acquiring the semaphore's
wait_lock inside rwsem_is_locked(). The SPL worked around the race condition
by acquiring the wait_lock before calling that function, but with the fix in
place it must not do that.
This commit implements an autoconf test to detect whether the fixed version of
rwsem_is_locked() is present. The previous version of rwsem_is_locked() was an
inline static function while the new version is exported as a symbol which we
can check for in module.symvers. Depending on the result we correctly
implement the needed compatibility macros for proper spinlock handling.
Finally, we do the right thing with spin locks in RW_*_HELD() by using the
new compatibility macros. We only only acquire the semaphore's wait_lock if
it is calling a rwsem_is_locked() that does not itself try to acquire the lock.
Some new overhead and a small harmless race is introduced by this change.
This is because RW_READ_HELD() and RW_WRITE_HELD() now acquire and release
the wait_lock twice: once for the call to rwsem_is_locked() and once for
the call to rw_owner(). This can't be avoided if calling a rwsem_is_locked()
that takes the wait_lock, as it will in more recent kernels.
The other case which only occurs in legacy kernels could be optimized by
taking the lock only once, as was done prior to this commit. However, I
decided that the performance gain probably wasn't significant enough to
justify the messy special cases required.
The function spl_rw_get_owner() was only used to enable the afore-mentioned
optimization. Since it is no longer used, I removed it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The Solaris semantics for kmem_alloc() and vmem_alloc() are that they
must never fail when called with KM_SLEEP. They may only fail if
called with KM_NOSLEEP otherwise they must block until memory is
available. This is quite different from how the Linux memory
allocators work, under Linux a memory allocation failure is always
possible and must be dealt with.
At one point in the past the kmem code did properly implement this
behavior, however as the code evolved this behavior was overlooked
in places. This patch goes through all three implementations of
the kmem/vmem allocation functions and ensures that they will all
block in the KM_SLEEP case when memory is not available. They
may still fail in the KM_NOSLEEP case in which case the caller
is responsible for handling the failure.
Special care is taken in vmalloc_nofail() to avoid thrashing the
system on the virtual address space spin lock. The down side of
course is if you do see a failure here, which is unlikely for
64-bit systems, your allocation will delay for an entire second.
Still this is preferable to locking up your system and it is the
best we can do given the constraints.
Additionally, the code was cleaned up to be much more readable
and comments were added to describe the various kmem-debug-*
configure options. The default configure options remain:
"--enable-debug-kmem --disable-debug-kmem-tracking"
It was being defined as the constant 64 and at first I changed it to be
NR_CPUS instead.
However, NR_CPUS can be a large value on recent kernels (4096), and this
may cause too large kmem allocations to happen.
Therefore, now we use num_possible_cpus(), which should return a (typically)
small value which represents the maximum number of CPUs than can be brought
online in the running hardware (this value is determined at boot time by
arch-specific kernel code).
Signed-off-by: Ricardo M. Correia <ricardo.correia@oracle.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Under Solaris bcopy() allows overlapping memory areas so we
must use memmove() instead of memcpy().
Signed-off-by: Ricardo M. Correia <ricardo.correia@oracle.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When CONFIG_DEBUG_MUTEXES is turned on in RHEL5's kernel config, the mutexes
store the owner for debugging purposes, therefore the SPL will enable
HAVE_MUTEX_OWNER. However, the SPL code uses ACCESS_ONCE() to access the
owner, and this macro is not defined in the RHEL5 kernel, therefore we define it
ourselves in include/linux/compiler_compat.h.
Signed-off-by: Ricardo M. Correia <ricardo.correia@oracle.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
To avoid symbol conflicts with dependent packages the debug
header must be split in to several parts. The <sys/debug.h>
header now only contains the Solaris macro's such as ASSERT
and VERIFY. The spl-debug.h header contain the spl specific
debugging infrastructure and should be included by any package
which needs to use the spl logging. Finally the spl-trace.h
header contains internal data structures only used for the log
facility and should not be included by anythign by spl-debug.c.
This way dependent packages can include the standard Solaris
headers without picking up any SPL debug macros. However, if
the dependant package want to integrate with the SPL debugging
subsystem they can then explicitly include spl-debug.h.
Along with this change I have dropped the CHECK_STACK macros
because the upstream Linux kernel now has much better stack
depth checking built in and we don't need this complexity.
Additionally SBUG has been replaced with PANIC and provided as
part of the Solaris macro set. While the Solaris version is
really panic() that conflicts with the Linux kernel so we'll
just have to make due to PANIC. It should rarely be called
directly, the prefered usage would be an ASSERT or VERIFY.
There's lots of change here but this cleanup was overdue.
Deadlocks in the zvol were observed when one of the ZFS threads
performing IO trys to allocate memory while the system is low
on memory. The low memory condition causes dirty pages to be
synced to the zvol but this can't progress because the original
thread is blocked waiting on a memory allocation. Thus we end
up deadlocking.
A proper solution proposed by Wizeman is to change KM_SLEEP from
GFP_KERNEL top GFP_NOFS. This will prevent the memory allocation
which is trying to allocate memory from forcing a sync to the
zvol in shrink_page_list()->pageout().
The down side to all of this is that we are using a pretty big
hammer by changing KM_SLEEP. This change means ALL of the zfs
memory allocations will be until to trigger dirty data to be
synced. The caller still should be able to reclaim memory from
the various slab caches. We will be totally dependent of other
kernel processes which happen to be running and a small number
of asynchronous reclaim threads to trigger the reclaim of dirty
data pages. This should be OK but I think we may see some
slightly longer allocation times when under memory pressure.
We shall see.
Up until now no SPL consumer attempted to perform signed 64-bit
division so there was no need to support this. That has now
changed so I adding 64-bit division support for 32-bit platforms.
The signed implementation is based on the unsigned version.
Since the have been several bug reports in the past concerning
correct 64-bit division on 32-bit platforms I added some long
over due regression tests. Much to my surprise the unsigned
64-bit division regression tests failed.
This was surprising because __udivdi3() was implemented by simply
calling div64_u64() which is provided by the kernel. This meant
that the linux kernels 64-bit division algorithm on 32-bit platforms
was flawed. After some investigation this turned out to be exactly
the case.
Because of this I was forced to abandon the kernel helper and
instead to fully implement 64-bit division in the spl. There are
several published implementation out there on how to do this
properly and I settled on one proposed in the book Hacker's Delight.
Their proposed algoritm is freely available without restriction
and I have just modified it to be linux kernel friendly.
The update implementation now passed all the unsigned and signed
regression tests. This should be functional, but not fast, which is
good enough for out purposes. If you want fast too I'd strongly
suggest you upgrade to a 64-bit platform. I have also reported the
kernel bug and we'll see if we can't get it fixed up stream.
Adds a task queue to receive tasks dispatched with TQ_FRONT. Worker
threads pull tasks from this high priority queue before the default
pending queue.
Executing tasks out of FIFO order potentially breaks taskq_lowest_id()
if we do not preserve the ordering of the work list by taskqid.
Therefore, instead of always appending to the work list, we search for
the appropriate place to insert a task. The common case is to append
to the list, so we make this operation efficient by searching the work
list in reverse order.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Prior to linux-2.6.33 only O_DSYNC semantics were implemented and
they used the O_SYNC flag. As of linux-2.6.33 this behavior was
properly split in to O_SYNC and O_DSYNC respectively.
When HAVE_MUTEX_OWNER is defined and we are directly accessing
mutex->owner treat is as volative with the ACCESS_ONCE() helper.
Without this you may get a stale cached value when accessing it
from different cpus. This can result in incorrect behavior from
mutex_owned() and mutex_owner(). This is not a problem for the
!HAVE_MUTEX_OWNER case because in this case all the accesses
are covered by a spin lock which similarly gaurentees we will
not be accessing stale data.
Secondly, check CONFIG_SMP before allowing access to mutex->owner.
I see that for non-SMP setups the kernel does not track the owner
so we cannot rely on it.
Thirdly, check CONFIG_MUTEX_DEBUG when this is defined and the
HAVE_MUTEX_OWNER is defined surprisingly the mutex->owner will
not be cleared on mutex_exit(). When this is the case the SPL
needs to make sure to do it to ensure MUTEX_HELD() behaves as
expected or you will certainly assert in mutex_destroy().
Finally, improve the mutex regression tests. For mutex_owned() we
now minimally check that it behaves correctly when checked from the
owner thread or the non-owner thread. This subtle behaviour has bit
me before and I'd like to catch it early next time if it reappears.
As for mutex_owned() regression test additonally verify that
mutex->owner is always cleared on mutex_exit().
For the moment the SPL accepts the TASKQ_DC_BATCH and TQ_FRONT
flags however they get silently ignored. This is harmless for
the moment but it does need to be implemented at some point.
We might as well have both asprintf() variants. This allows us
to safely pass a va_list through several levels of the stack
using va_copy() instead of va_start().
It turns out Solaris incidentally includes kstat.h from kmem.h. As
a side effect of this certain higher level .c files which should
explicitly include kstat.h don't because they happen to get it
via kmem.h. To make like easier for everyone I do the same.
This patch adds three missing Solaris functions: kmem_asprintf(), strfree(),
and strdup(). They are all implemented as a thin layer which just calls
their Linux counterparts. As part of this an autoconf check for kvasprintf
was added because it does not appear in older kernels. If the kernel does
not provide it then spl-generic implements it.
Additionally the dead DEBUG_KMEM_UNIMPLEMENTED code was removed to clean
things up and make the kmem.h a little more readable.
Add the basic xuio structure and typedefs for Solaris style zero copy.
There's a decent chance this will not be the way I handle this on Linux
but providing the basic types simplifies things for now.
Under linux the proc.h header is for the /proc filesystem, and under
Solaris the proc/h header if for processes. This patch correctly
moves the Linux proc functionality in a linux/proc_compat.h header
and leaves the sys/proc.h for use by Solaris. Minor updates were
required to all the call sites where it was included of course.
Remove RW_COUNT() from the rwlock implementation. The idea was that it
could be used as a generic wrapper for getting at the internal state
of a rwlock. While a good idea it's proven problematic to keep it
correct for multiple archs and internal implementation changes. In
short it hasn't been worth the trouble.
With that and simplicity in mind things have been updated to use the
rwsem_is_locked() function instead of RW_COUNT for the RW_*_HELD()
functions. As for rw_upgrade() it remains only implemented for
the generic rwsem implemenation. It remains to be determined if its
worth the effort of adding a custom implementation for each arch.
Updated AUTHORS, COPYING, DISCLAIMER, and INSTALL files. Added
standardized headers to all source file to clearly indicate the
copyright, license, and to give credit where credit is due.
This is a minor extension to the condition variable API to allow
for reasonable signal handling on Linux. The cv_wait() function by
definition must wait unconditionally for cv_signal()/cv_broadcast()
before waking it. This makes it impossible to woken by a signal
such as SIGTERM. The cv_wait_interruptible() function was added
to handle this case. It behaves identically to cv_wait() with the
exception that it waits interruptibly allowing a signal to wake it
up. This means you do need to be careful and check issig() after
waking.
For kernels using the CONFIG_RWSEM_GENERIC_SPINLOCK implementation
nothing has changed. But if your kernel is building with arch
specific rwsems rw_tryupgrade() has been disabled until it can
be implemented correctly. In particular, the x86 implementation
now leverages atomic primatives for serialization rather than
spinlocks. So to get this working again it will need to be
implemented as a cmpxchg for x86 and likely something similiar
for other arches we are interested in. For now it's safest
to simply disable it.
We need dependent packages to be able to include spl_config.h to
build properly. This was partially solved in commit 0cbaeb1 by using
AH_BOTTOM to #undef common #defines (PACKAGE, VERSION, etc) which
autoconf always adds and cannot be easily removed. This solution
works as long as the spl_config.h is included before your projects
config.h. That turns out to be easier said than done. In particular,
this is a problem when your package includes its config.h using the
-include gcc option which ensures the first thing included is your
config.h.
To handle all cases cleanly I have removed the AH_BOTTOM hack and
replaced it with an AC_CONFIG_HEADERS command. This command runs
immediately after spl_config.h is written and with a little awk-foo
it strips the offending #defines from the file. This eliminates
the problem entirely and makes header safe for inclusion.
Also in this change I have removed the few places in the code where
spl_config.h is included. It is now added to the gcc compile line
to ensure the config results are always available.
Finally, I have also disabled the verbose kernel builds. If you
want them back you can always build with 'make V=1'. Since things
are working now they don't need to be on by default.
As of linux-2.6.32 the 'struct file *filp' argument was dropped from
the proc_handle() prototype. It was apparently unused _almost_
everywhere in the kernel and this was simply cleanup.
I've added a new SPL_AC_5ARGS_PROC_HANDLER autoconf check for this and
the proper compat macros to correctly define the prototypes and some
helper functions. It's not pretty but API compat changes rarely are.
As part of the 2.6.28 cleanup which moved all the linux/include/asm/
headers in to linux/arch, the guard headers for many header files
changed. The i386 rwsem implementation keys off this header to
ensure the internal members of the rwsem structure are interpreted
correctly. This change checks for the new guard macro in addition
to the only one, the implementation of the rwsem has not changed
for i386 so this is safe and correct.
This patch is another step towards updating the code to handle the
32-bit kernels which I have not been regularly testing. This changes
do not really impact the common case I'm expected which is the latest
kernel running on an x86_64 arch.
Until the linux-2.6.31 kernel the x86 arch did not have support for
64-bit atomic operations. Additionally, the new atomic_compat.h support
for this case was wrong because it embedded a spinlock in the atomic
variable which must always and only be 64-bits total. To handle these
32-bit issues we now simply fall back to the --enable-atomic-spinlock
implementation if the kernel does not provide the 64-bit atomic funcs.
The second issue this patch addresses is the DEBUG_KMEM assumption that
there will always be atomic64 funcs available. On 32-bit archs this may
not be true, and actually that's just fine. In that case the kernel will
will never be able to allocate more the 32-bits worth anyway. So just
check if atomic64 funcs are available, if they are not it means this
is a 32-bit machine and we can safely use atomic_t's instead.
This symbol can be used by GPL modules which use the SPL to handle
cases where a call path takes a two different locks by the same
name. This is needed to avoid a false positive in the lock checker.
The big fix here is the removal of kmalloc() in kv_alloc(). It used
to be true in previous kernels that kmallocs over PAGE_SIZE would
always be pages aligned. This is no longer true atleast in 2.6.31
there are no longer any alignment expectations. Since kv_alloc()
requires the resulting address to be page align we no only either
directly allocate pages in the KMC_KMEM case, or directly call
__vmalloc() both of which will always return a page aligned address.
Additionally, to avoid wasting memory size is always a power of two.
As for cleanup several helper functions were introduced to calculate
the aligned sizes of various data structures. This helps ensure no
case is accidentally missed where the alignment needs to be taken in
to account. The helpers now use P2ROUNDUP_TYPE instead of P2ROUNDUP
which is safer since the type will be explict and we no longer count
on the compiler to auto promote types hopefully as we expected.
Always wnforce minimum (SPL_KMEM_CACHE_ALIGN) and maximum (PAGE_SIZE)
alignment restrictions at cache creation time.
Use SPL_KMEM_CACHE_ALIGN in splat alignment test.
As of 2.6.31 it's clear __GFP_NOFAIL should no longer be used and it
may disappear from the kernel at any time. To handle this I have simply
added *_nofail wrappers in the kmem implementation which perform the
retry for non-atomic allocations.
From linux-2.6.31 mm/page_alloc.c:1166
/*
* __GFP_NOFAIL is not to be used in new code.
*
* All __GFP_NOFAIL callers should be fixed so that they
* properly detect and handle allocation failures.
*
* We most definitely don't want callers attempting to
* allocate greater than order-1 page units with
* __GFP_NOFAIL.
*/
WARN_ON_ONCE(order > 1);
SPL_AC_2ARGS_SET_FS_PWD macro updated to explicitly include
linux/fs_struct.h which was dropped from linux/sched.h.
min_wmark_pages, low_wmark_pages, high_wmark_pages macros
introduced in newer kernels. For older kernels mm_compat.h
was introduced to define them as needed as direct mappings
to per zone min_pages, low_pages, max_pages.
Cleanup the --enable-debug-* configure options, this has been pending
for quite some time and I am glad I finally got to it. To summerize:
1) All SPL_AC_DEBUG_* macros were updated to be a more autoconf
friendly. This mainly involved shift to the GNU approved usage of
AC_ARG_ENABLE and ensuring AS_IF is used rather than directly using
an if [ test ] construct.
2) --enable-debug-kmem=yes by default. This simply enabled keeping
a running tally of total memory allocated and freed and reporting a
memory leak if there was one at module unload. Additionally, it
ensure /proc/spl/kmem/slab will exist by default which is handy.
The overhead is low for this and it should not impact performance.
3) --enable-debug-kmem-tracking=no by default. This option was added
to provide a configure option to enable to detailed memory allocation
tracking. This support was always there but you had to know where to
turn it on. By default this support is disabled because it is known
to badly hurt performence, however it is invaluable when chasing a
memory leak.
4) --enable-debug-kstat removed. After further reflection I can't see
why you would ever really want to turn this support off. It is now
always on which had the nice side effect of simplifying the proc handling
code in spl-proc.c. We can now always assume the top level directory
will be there.
5) --enable-debug-callb removed. This never really did anything, it was
put in provisionally because it might have been needed. It turns out
it was not so I am just removing it to prevent confusion.
These functions didn't exist for all archs prior to 2.6.24. This
patch addes an autoconf test to detect this and add them when needed.
The autoconf check is needed instead of just an #ifndef because in
the most modern kernels atomic64_{cmp}xchg are implemented as in
inline function and not a #define.
Previously Solaris style atomic primitives were implemented simply by
wrapping the desired operation in a global spinlock. This was easy to
implement at the time when I wasn't 100% sure I could safely layer the
Solaris atomic primatives on the Linux counterparts. It however was
likely not good for performance.
After more investigation however it does appear the Solaris primitives
can be layered on Linux's fairly safely. The Linux atomic_t type really
just wraps a long so we can simply cast the Solaris unsigned value to
either a atomic_t or atomic64_t. The only lingering problem for both
implementations is that Solaris provides no atomic read function. This
means reading a 64-bit value on a 32-bit arch can (and will) result in
word breaking. I was very concerned about this initially, but upon
further reflection it is a limitation of the Solaris API. So really
we are just being bug-for-bug compatible here.
With this change the default implementation is layered on top of Linux
atomic types. However, because we're assuming a lot about the internal
implementation of those types I've made it easy to fall-back to the
generic approach. Simply build with --enable-atomic_spinlocks if
issues are encountered with the new implementation.
Ricardo has pointed out that under Solaris the cwd is set to '/'
during module load, while under Linux it is set to the callers cwd.
To handle this cleanly I've reworked the module *_init()/_exit()
macros so they call a *_setup()/_cleanup() function when any SPL
dependent module is loaded or unloaded. This gives us a chance to
perform any needed modification of the process, in this case changing
the cwd. It also handily provides a way to avoid creating wrapper
init()/exit() functions because the Solaris and Linux prototypes
differ slightly. All dependent modules should now call the spl
helper macros spl_module_{init,exit}() instead of the native linux
versions.
Unfortunately, it appears that under Linux there has been no consistent
API in the kernel to set the cwd in a module. Because of this I have
had to add more autoconf magic than I'd like. However, what I have
done is correct and has been tested on RHEL5, SLES11, FC11, and CHAOS
kernels.
In addition, I have change the rootdir type from a 'void *' to the
correct 'vnode_t *' type. And I've set rootdir to a non-NULL value.
We need to directly call __init_rwsem() or the name gets expanded
to SEM(lock-name). This is safe and correct for the support arches
x86/x86_64/ppc/ppc64.
For a generic explanation of why mutexs needed to be reimplemented
to work with the kernel lock profiling see commits:
e811949a57 and
d28db80fd0
The specific changes made to the mutex implemetation are as follows.
The Linux mutex structure is now directly embedded in the kmutex_t.
This allows a kmutex_t to be directly case to a mutex struct and
passed directly to the Linux primative.
Just like with the rwlocks it is critical that these functions be
implemented as '#defines to ensure the location information is
preserved. The preprocessor can then do a direct replacement of
the Solaris primative with the linux primative.
Just as with the rwlocks we need to track the lock owner. Here
things get a little more interesting because depending on your
kernel version, and how you've built your kernel Linux may already
do this for you. If your running a 2.6.29 or newer kernel on a
SMP system the lock owner will be tracked. This was added to Linux
to support adaptive mutexs, more on that shortly. Alternately, your
kernel might track the lock owner if you've set CONFIG_DEBUG_MUTEXES
in the kernel build. If neither of the above things is true for
your kernel the kmutex_t type will include and track the lock owner
to ensure correct behavior. This is all handled by a new autoconf
check called SPL_AC_MUTEX_OWNER.
Concerning adaptive mutexs these are a very recent development and
they did not make it in to either the latest FC11 of SLES11 kernels.
Ideally, I'd love to see this kernel change appear in one of these
distros because it does help performance. From Linux kernel commit:
0d66bf6d3514b35eb6897629059443132992dbd7
"Testing with Ingo's test-mutex application...
gave a 345% boost for VFS scalability on my testbox"
However, if you don't want to backport this change yourself you
can still simply export the task_curr() symbol. The kmutex_t
implementation will use this symbol when it's available to
provide it's own adaptive mutexs.
Finally, DEBUG_MUTEX support was removed including the proc handlers.
This was done because now that we are cleanly integrated with the
kernel profiling all this information and much much more is available
in debug kernel builds. This code was now redundant.
Update mutexs validated on:
- SLES10 (ppc64)
- SLES11 (x86_64)
- CHAOS4.2 (x86_64)
- RHEL5.3 (x86_64)
- RHEL6 (x86_64)
- FC11 (x86_64)
The behavior of RW_*_HELD was updated because it was not quite right.
It is not sufficient to return non-zero when the lock is help, we must
only do this when the current task in the holder.
This means we need to track the lock owner which is not something
tracked in a Linux semaphore. After some experimentation the
solution I settled on was to embed the Linux semaphore at the start
of a larger krwlock_t structure which includes the owner field.
This maintains good performance and allows us to cleanly intergrate
with the kernel lock analysis tools. My reasons:
1) By placing the Linux semaphore at the start of krwlock_t we can
then simply cast krwlock_t to a rw_semaphore and pass that on to
the linux kernel. This allows us to use '#defines so the preprocessor
can do direct replacement of the Solaris primative with the linux
equivilant. This is important because it then maintains the location
information for each rw_* call point.
2) Additionally, by adding the owner to krwlock_t we can keep this
needed extra information adjacent to the lock itself. This removes
the need for a fancy lookup to get the owner which is optimal for
performance. We can also leverage the existing spin lock in the
semaphore to ensure owner is updated correctly.
3) All helper functions which do not need to strictly be implemented
as a define to preserve location information can be done as a static
inline function.
4) Adding the owner to krwlock_t allows us to remove all memory
allocations done during lock initialization. This is good for all
the obvious reasons, we do give up the ability to specific the lock
name. The Linux profiling tools will stringify the lock name used
in the code via the preprocessor and use that.
Update rwlocks validated on:
- SLES10 (ppc64)
- SLES11 (x86_64)
- CHAOS4.2 (x86_64)
- RHEL5.3 (x86_64)
- RHEL6 (x86_64)
- FC11 (x86_64)
It turns out that the previous rwlock implementation worked well but
did not integrate properly with the upstream kernel lock profiling/
analysis tools. This is a major problem since it would be awfully
nice to be able to use the automatic lock checker and profiler.
The problem is that the upstream lock tools use the pre-processor
to create a lock class for each uniquely named locked. Since the
rwsem was embedded in a wrapper structure the name was always the
same. The effect was that we only ended up with one lock class for
the entire SPL which caused the lock dependency checker to flag
nearly everything as a possible deadlock.
The solution was to directly map a krwlock to a Linux rwsem using
a typedef there by eliminating the wrapper structure. This was not
done initially because the rwsem implementation is specific to the arch.
To fully implement the Solaris krwlock API using only the provided rwsem
API is not possible. It can only be done by directly accessing some of
the internal data member of the rwsem structure.
For example, the Linux API provides a different function for dropping
a reader vs writer lock. Whereas the Solaris API uses the same function
and the caller does not pass in what type of lock it is. This means to
properly drop the lock we need to determine if the lock is currently a
reader or writer lock. Then we need to call the proper Linux API function.
Unfortunately, there is no provided API for this so we must extracted this
information directly from arch specific lock implementation. This is
all do able, and what I did, but it does complicate things considerably.
The good news is that in addition to the profiling benefits of this
change. We may see performance improvements due to slightly reduced
overhead when creating rwlocks and manipulating them.
The only function I was forced to sacrafice was rw_owner() because this
information is simply not stored anywhere in the rwsem. Luckily this
appears not to be a commonly used function on Solaris, and it is my
understanding it is mainly used for debugging anyway.
In addition to the core rwlock changes, extensive updates were made to
the rwlock regression tests. Each class of test was extended to provide
more API coverage and to be more rigerous in checking for misbehavior.
This is a pretty significant change and with that in mind I have been
careful to validate it on several platforms before committing. The full
SPLAT regression test suite was run numberous times on all of the following
platforms. This includes various kernels ranging from 2.6.16 to 2.6.29.
- SLES10 (ppc64)
- SLES11 (x86_64)
- CHAOS4.2 (x86_64)
- RHEL5.3 (x86_64)
- RHEL6 (x86_64)
- FC11 (x86_64)
The run time stack overflow checking is being disabled by default
because it is not safe for use with 2.6.29 and latter kernels. These
kernels do now have their own stack overflow checking so this support
has become redundant anyway. It can be re-enabled for older kernels or
arches without stack overflow checking by redefining CHECK_STACK().
Basically everything we need to monitor the global memory state of
the system is now cleanly available via global_page_state(). The
problem is that this interface is still fairly recent, and there
has been one change in the page state enum which we need to handle.
These changes basically boil down to the following:
- If global_page_state() is available we should use it. Several
autoconf checks have been added to detect the correct enum names.
- If global_page_state() is not available check to see if
get_zone_counts() symbol is available and use that.
- If the get_zone_counts() symbol is not exported we have no choice
be to dynamically aquire it at load time. This is an absolute
last resort for old kernel which we don't want to patch to
cleanly export the symbol.
The previous credential implementation simply provided the needed types and
a couple of dummy functions needed. This update correctly ties the basic
Solaris credential API in to one of two Linux kernel APIs.
Prior to 2.6.29 the linux kernel embeded all credentials in the task
structure. For these kernels, we pass around the entire task struct as if
it were the credential, then we use the helper functions to extract the
credential related bits.
As of 2.6.29 a new credential type was added which we can and do fairly
cleanly layer on top of. Once again the helper functions nicely hide
the implementation details from all callers.
Three tests were added to the splat test framework to verify basic
correctness. They should be extended as needed when need credential
functions are added.
used to scale the number of threads based on the number of online
CPUs. As CPUs are added/removed we should rescale the thread
count appropriately, but currently this is only done at create.
- Initial SLES testing uncovered a long standing bug in the debug
tracing. The tcd_for_each() macro expected a NULL to terminate
the trace_data[i] array but this was only ever true due to luck.
All trace_data[] iterators are now properly capped by TCD_TYPE_MAX.
- SPLAT_MAJOR 229 conflicted with a 'hvc' device on my SLES system.
Since this was always an arbitrary choice I picked something else.
- The HAVE_PGDAT_LIST case should set pgdat_list_addr to the value stored
at the address of the memory location returned by kallsyms_lookup_name().
- Prior to 2.6.17 there were no *_pgdat helper functions in mm/mmzone.c.
Instead for_each_zone() operated directly on pgdat_list which may or
may not have been exported depending on how your kernel was compiled.
Now new configure checks determine if you have the helpers or not, and
if the needed symbols are exported. If they are not exported then they
are dynamically aquired at runtime by kallsyms_lookup_name().
- Enable builds for powerpc ISA type.
- Add DIV_ROUND_UP and roundup macros if unavailable.
- Cast 64-bit values for %lld format string to (long long) to
quiet compile warning.
- Configure check for mutex_lock_nested(). This function was introduced
as part of the mutex validator in 2.6.18, but if it's unavailable then
it's safe to fallback to a plain mutex_lock().
- Configure check, the div64_64() function was renamed to
div64_u64() as of 2.6.26.
- Configure check, the global_page_state() fuction was introduced
in 2.6.18 kernels. The earlier 2.6.16 based SLES10 must not try
and use it, thankfully get_zone_counts() is still available.
- To simplify debugging poison all symbols aquired dynamically
using spl_kallsyms_lookup_name() with SYMBOL_POISON.
- Add console messages when the user mode helpers fail.
- spl_kmem_init_globals() use bit shifts instead of division.
- When the monotonic clock is unavailable __gethrtime() must perform
the HZ division as an 'unsigned long long' because the SPL only
implements __udivdi3(), and not __divdi3() for 'long long' division
on 32-bit arches.
We need dependent packages to be able to include spl_config.h so they
can leverage the configure checks the SPL has done. This is important
because several of the spl headers need the results of these checks to
work properly. Unfortunately, the autoheader build product is always
private to a particular build and defined certain common things.
(PACKAGE, VERSION, etc). This prevents other packages which also use
autoheader from being include because the definitions conflict. To
avoid this problem the SPL build system leverage AH_BOTTOM to include
a spl_unconfig.h at the botton of the autoheader build product. This
custom include undefs all known shared symbols to prevent the confict.
This does however mean that those definition are also not availble
to the SPL package either. The SPL package therefore uses the
equivilant SPL_META_* definitions.
In the interests of portability I have added a FC10/i686 box to
my list of development platforms. The hope is this will allow me
to keep current with upstream kernel API changes, and at the same
time ensure I don't accidentally break x86 support. This patch
resolves all remaining issues observed under that environment.
1) SPL_AC_ZONE_STAT_ITEM_FIA autoconf check added. As of 2.6.21
the kernel added a clean API for modules to get the global count
for free, inactive, and active pages. The SPL attempts to detect
if this API is available and directly map spl_global_page_state()
to global_page_state(). If the full API is not available then
spl_global_page_state() is implemented as a thin layer to get
these values via get_zone_counts() if that symbol is available.
2) New kmem:vmem_size regression test added to validate correct
vmem_size() functionality. The test case acquires the current
global vmem state, allocates from the vmem region, then verifies
the allocation is correctly reflected in the vmem_size() stats.
3) Change splat_kmem_cache_thread_test() to always use KMC_KMEM
based memory. On x86 systems with limited virtual address space
failures resulted due to exhaustig the address space. The tests
really need to problem exhausting all memory on the system thus
we need to use the physical address space.
4) Change kmem:slab_lock to cap it's memory usage at availrmem
instead of using the native linux nr_free_pages(). This provides
additional test coverage of the SPL Linux VM integration.
5) Change kmem:slab_overcommit to perform allocation of 256K
instead of 1M. On x86 based systems it is not possible to create
a kmem backed slab with entires of that size. To compensate for
this the number of allocations performed in increased by 4x.
6) Additional autoconf documentation for proposed upstream API
changes to make additional symbols available to modules.
7) Console error messages added when spl_kallsyms_lookup_name()
fails to locate an expected symbol. This causes the module to fail
to load and we need to know exactly which symbol was not available.
I'm very surprised this has not surfaced until now. But the taskq_wait()
implementation work only wait successfully the first time it was called.
Subsequent usage of taskq_wait() on the taskq would not wait.
The issue was caused by tq->tq_lowest_id being set to MAX_INT after the
first wait completed. This caused subsequent waits which check that the
waiting id is less than the lowest taskq id to always succeed. The fix
is to ensure that tq->tq_lowest_id is never set larger than tq->tq_next.id.
Additional fixes which were added to this patch include:
1) Fix a race by placing the taskq_wait_check() in the tq->tq_lock spinlock.
2) taskq_wait() should wait for the largest outstanding id.
3) Multiple spelling corrections.
4) Added taskq wait regression test to validate correct behavior.
An update to the build system to properly support all commonly
used Makefile targets these include:
make all # Build everything
make install # Install everything
make clean # Clean up build products
make distclean # Clean up everything
make dist # Create package tarball
make srpm # Create package source RPM
make rpm # Create package binary RPMs
make tags # Create ctags and etags for everything
Extra care was taken to ensure that the source RPMs are fully
rebuildable against Fedora/RHEL/Chaos kernels. To build binary
RPMs from the source RPM for your system simply run:
rpmbuild --rebuild spl-x.y.z-1.src.rpm
This will produce two binary RPMs with correct 'requires'
dependencies for your kernel. One will contain all spl modules
and support utilities, the other is a devel package for compiling
additional kernel modules which are dependant on the spl.
spl-x.y.z-1_<kernel version>.x86_64.rpm
spl-devel-x.y.2-1_<kernel version>.x86_64.rpm
Remove all instances of functions being reimplemented in the SPL.
When the prototypes are available in the linux headers but the
function address itself is not exported use kallsyms_lookup_name()
to find the address. The function name itself can them become a
define which calls a function pointer. This is preferable to
reimplementing the function in the SPL because it ensures we get
the correct version of the function for the running kernel. This
is actually pretty safe because the prototype is defined in the
headers so we know we are calling the function properly.
This patch also includes a rhel5 kernel patch we exports the needed
symbols so we don't need to use kallsyms_lookup_name(). There are
autoconf checks to detect if the symbol is exported and if so to
use it directly. We should add patches for stock upstream kernels
as needed if for no other reason than so we can easily track which
additional symbols we needed exported. Those patches can also be
used by anyone willing to rebuild their kernel, but this should
not be a requirement. The rhel5 version of the export-symbols
patch has been applied to the chaos kernel.
Additional fixes:
1) Implement vmem_size() function using get_vmalloc_info()
2) SPL_CHECK_SYMBOL_EXPORT macro updated to use $LINUX_OBJ instead
of $LINUX because Module.symvers is a build product. When
$LINUX_OBJ != $LINUX we will not properly detect exported symbols.
3) SPL_LINUX_COMPILE_IFELSE macro updated to add include2 and
$LINUX/include search paths to allow proper compilation when
the kernel target build directory is not the source directory.
Minimal support added for the zone_get_hostid() function. Only
global zones are supported therefore this function must be called
with a NULL argumment. Additionally, I've added the HW_HOSTID_LEN
define and updated all instances where a hard coded magic value
of 11 was used; "A good riddance of bad rubbish!"
Because vmem_free() was implemented as a macro using the ','
operator to evaluate both arguments and we performed the free
before evaluating size we would deference the free'd pointer.
To resolve the problem we just invert the ordering and evaluate
size first just as if it was evaluated by the caller when being
passed to this function. This ensure that if the caller is
doing something reckless like performing an assignment as
part of the size argument we still perform it and it simply
doesn't get removed by the macro. Oh course nobody should
be doing this sort of thing, but just in case.
- The previous magazine ageing sceme relied on the on_each_cpu()
function to call spl_magazine_age() on each cpu. It turns out
this could deadlock with do_flush_tlb_all() which also relies
on the IPI based on_each_cpu(). To avoid this problem a per-
magazine delayed work item is created and indepentantly
scheduled to the correct cpu removing the need for on_each_cpu().
- Additionally two unused fields were removed from the type
spl_kmem_cache_t, they were hold overs from previous cleanup.
- struct work_struct work
- struct timer_list timer
- Default SPL_KMEM_CACHE_DELAY changed to 15 to match Solaris.
- Aged out slab checking occurs every SPL_KMEM_CACHE_DELAY / 3.
- skc->skc_reap tunable added whichs allows callers of
spl_slab_reclaim() to cap the number of slabs reclaimed.
On Solaris all eligible slabs are always reclaimed, and this
is still the default behavior. However, I suspect that is
not always wise for reasons such as in the next comment.
- spl_slab_reclaim() added cond_resched() while walking the
slab/object free lists. Soft lockups were observed when
freeing large numbers of vmalloc'd slabs/objets.
- spl_slab_reclaim() 'sks->sks_ref > 0' check changes from
incorrect 'break' to 'continue' to ensure all slabs are
checked.
- spl_cache_age() reworked to avoid a deadlock with
do_flush_tlb_all() which occured because we slept waiting
for completion in spl_cache_age(). To waiting for magazine
reclamation to finish is not required so we no longer wait.
- spl_magazine_create() and spl_magazine_destroy() shifted
back to using for_each_online_cpu() instead of the
spl_on_each_cpu() approach which was of course a bad idea
due to memory allocations which Ricardo pointed out.
Added support for Solaris swapfs_minfree, and swapfs_reserve tunables.
In additional availrmem is now available and return a reasonable value
which is reasonably analogous to the Solaris meaning. On linux we
return the sun of free and inactive pages since these are all easily
reclaimable.
All tunables are available in /proc/sys/kernel/spl/vm/* and they may
need a little adjusting once we observe the real behavior. Some of
the defaults are mapped to similar linux counterparts, others are
straight from the OpenSolaris defaults.
Support added to provide reasonable values for the global Solaris
VM variables: minfree, desfree, lotsfree, needfree. These values
are set to the sum of their per-zone linux counterparts which
should be close enough for Solaris consumers.
When a non-GPL app links against the SPL we cannot use the udev
interfaces, which means non of the device special files are created.
Because of this I had added a poor mans udev which cause the SPL
to invoke an upcall and create the basic devices when a minor
is registered. When a minor is unregistered we use the vnode
interface to unlink the special file.
- Added SPL_AC_3ARGS_ON_EACH_CPU configure check to determine
if the older 4 argument version of on_each_cpu() should be
used or the new 3 argument version. The retry argument was
dropped in the new API which was never used anyway.
- Updated work queue compatibility wrappers. The old way this
worked was to pass a data point when initialized the workqueue.
The new API assumed the work item is embedding in a structure
and we us container_of() to find that data pointer.
- Updated skc->skc_flags to be an unsigned long which is now
type checked in the bit operations. This silences the warnings.
- Updated autogen products and splat tests accordingly
- Added slab work queue task which gradually ages and free's slabs
from the cache which have not been used recently.
- Optimized slab packing algorithm to ensure each slab contains the
maximum number of objects without create to large a slab.
- Fix deadlock, we can never call kv_free() under the skc_lock. We
now unlink the objects and slabs from the cache itself and attach
them to a private work list. The contents of the list are then
subsequently freed outside the spin lock.
- Move magazine create/destroy operation on to local cpu.
- Further performace optimizations by minimize the usage of the large
per-cache skc_lock. This includes the addition of KMC_BIT_REAPING
bit mask which is used to prevent concurrent reaping, and to defer
new slab creation when reaping is occuring.
- Add KMC_BIT_DESTROYING bit mask which is set when the cache is being
destroyed, this is used to catch any task accessing the cache while
it is being destroyed.
- Add comments to all the functions and additional comments to try
and make everything as clear as possible.
- Major cleanup and additions to the SPLAT kmem tests to more
rigerously stress the cache implementation and look for any problems.
This includes correctness and performance tests.
- Updated portable work queue interfaces
udev support from sunddi implementation because it uses GPL-only
symbols. This support is optionally available for SPL consumers
if they define HAVE_GPL_ONLY_SYMBOLS and license their module as
GPL using the MODULE_LICENSE("GPL") macro.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@179 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
This fixes an oops when unloading the modules, in the case where memory
tracking was enabled and there were memory leaks. The comment in the
code explains what was the problem.
* spl-10-fix-assert-verify-ndebug.patch
This fixes ASSERT*() and VERIFY*() macros in non-debug builds. VERIFY*()
macros are supposed to check the condition and panic even in production
builds, and ASSERT*() macros don't need to evaluate the arguments.
Also some 32-bit fixes.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@165 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
That said when working with a finite resource like memory failure really
is always a possibility. It would be far better longer term if the ZFS
code could be weened off this assumption and properly handle the cases
where an allocation fails. Still I've applied the patch to spl-0.3.4
since this layer is supposed to emulate Solaris as closely as possible.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@164 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
already supprt atomic64_t types.
* spl-07-kmem-cleanup.patch
This moves all the debugging code from sys/kmem.h to spl-kmem.c, because
the huge macros were hard to debug and were bloating functions that
allocated memory. I also fixed some other minor problems, including
32-bit fixes and a reported memory leak which was just due to using the
wrong free function.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@163 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
spl-05-div64.patch
This is a much less intrusive fix for undefined 64-bit division symbols
when compiling the DMU in 32-bit kernels.
* spl-06-atomic64.patch
This is a workaround for 32-bit kernels that don't have atomic64_t.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@162 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
* spl-04-fix-taskq-spinlock-lockup.patch
Fixes a deadlock in the BIO completion handler, due to the taskq code
prematurely re-enabling interrupts when another spinlock had disabled
them in the IDE IRQ handler.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@161 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
from Ricardo which removes a dependency on the GPL-only symbol
set_cpus_allowed(). Using this symbol is simpler but in the name
of portability we are adopting a spinlock based solution here
to remove this dependency.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@160 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
were added to cover the 3 possible APIs from 2.6.9 to
2.6.26. We attempt to use the newest interfaces and if
not available fallback to the oldest. This a rework of
some changes proposed by Ricardo for RHEL4.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@150 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
at a time as I audit it. This chunk finishes moving the SPL entirely
off the linux slab on to the SPL implementation. It differs slightly
from the proposed version in that the spl continues to export to
all the Solaris types and functions. These do conflict with the
Linux slab so a module usings these interfaces must not include the
SPL slab if they also intend to use the linux slab. Or they must
explcitly #undef the macros which remap the functioin to their
spl_* equivilants.
A nice side of effect of dropping the entire linux slab is we
don't need to autoconf checks anymore. They kept messing with
the slab API endlessly!
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@148 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
based of the spl_kmem_obj_t tacked on the end of each object.
This actually isn't so back because we are now allocing large
chunks for the slab and partitioning it ourselves. So there's
not a ton of wasted space. We may suffer a performance hit
however due to alignment issues.
- Remove remaining depenancies on the linux slab implementation.
We're standing on our own now for better or worse.
- Rework slabs to be either kmem or vmem based. If neither
KMC_VMEM of KMC_KMEM are specified we make a decent guess
about what will work best for their based on the object
size. Additionally we provide a kmem_virt() function caller
can use to see if they have a virtual or physical address.
- Minor fixups in the test suite.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@141 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
cycle count which was costing me overhead. It was hurting
performance pretty badly for heavily used caches. I'm also
thinking the hash may be hurting me as well and it might
be worth sticking a pointer in to a little space after the
alloced object.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@140 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
based by vmalloc()'ed memory. I now alloc a slab which is
roughly 32*spl_obj_size and in this block of memory I place
the slab descriptor, slab object descriptors, and objects
themselves. This greatly reduces vmalloc lock contention.
Still some minor cleanup remains and fine tuning but
it's working pretty well.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@139 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
well for the expected workloads. Improvement in this commit include:
- Added DEBUG_KMEM_TRACKING #define which can optionally be set
when DEBUG_KMEM is defined to do per allocation tracking. This
allows us to get all the lightweight kmem debugging enabled by
default which is pretty light weight, and only when looking
for a memory leak we can briefly enable the per alloc tracking.
- Added set_normalized_timespec() in to SPL to simply using
the timespec() primatives from within a module.
- Added per-spinlock cycle counters to the slab in an attempt
to run down a lock contention issue. The contended lock
was in vmalloc() but I'm going to leave the cycle counters
in place for a little while until I'm convinced there arn't
other locking improvement possible in the slab.
- Added a proc interface to the slab to export per slab
cache statistics to /proc/spl/kmem/slab for analysis.
- Reworked spl_slab_alloc() function to allocate from kmem for
small allocation and vmem for large allocations. This improved
things considerably but futher work is needed.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@138 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
when repopulating it. Plus I fixed a few more suble races in
that part of the code which were catching me. Finally I fixed
a small race in kmem_test8.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@137 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
factor of 10x improvement on SMP system due to reduced lock contention.
This may put me in the ballpark of what is needed. We can still further
improve things on NUMA systems by creating an additional L3 cache per
memory node instead of the current global pool. With luck this won't
be needed. I should also take another look at the locking now that
everything is working. There's a good chance I can tighten it up a
little bit and improve things a little more.
kmem_lock: time (sec) slabs objs hash
kmem_lock: tot/max/calc tot/max/calc size/depth
kmem_lock: 0.000999926 6/6/1 192/192/32 32768/0
kmem_lock: 0.000999926 4/4/2 128/128/64 32768/0
kmem_lock: 0.000999926 4/4/4 128/128/128 32768/0
kmem_lock: 0.000999926 4/4/8 128/128/256 32768/0
kmem_lock: 0.000999926 4/4/16 128/128/512 32768/0
kmem_lock: 0.000999926 4/4/32 128/128/1024 32768/0
kmem_lock: 0.000999926 4/4/64 128/128/2048 32768/0
kmem_lock: 0.000999926 8/8/128 256/256/4096 32768/0
kmem_lock: 0.003999704 24/23/256 768/736/8192 32768/1
kmem_lock: 0.012999038 44/41/512 1408/1312/16384 32768/1
kmem_lock: 0.051996153 96/93/1024 3072/2976/32768 32768/2
kmem_lock: 0.181986536 187/184/2048 5984/5888/65536 32768/3
kmem_lock: 0.655951469 342/339/4096 10944/10848/131072 32768/4
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@136 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
to be overly clever and the context switch when the semaphore was busy
was destroying performance. Converting to a simple spin lock bough me
a factor of 50 or so. That said it's still not good enough. Tests
show bad performance and we are still CPU bound. The logical fix is
I need to implement per-cpu hot caches to minimize the SMP contention.
Linux and Solaris both have this, I was hoping to do without but it
looks like that's not to be.
kmem_lock: time (sec) slabs objs hash
kmem_lock: tot/max/calc tot/max/calc size/depth
kmem_lock: 0.022000000 7/6/64 224/177/2048 32768/1
kmem_lock: 0.039000000 13/13/128 416/404/4096 32768/1
kmem_lock: 0.079000000 23/21/256 736/672/8192 32768/1
kmem_lock: 0.158000000 48/47/512 1536/1504/16384 32768/1
kmem_lock: 0.345000000 105/105/1024 3360/3358/32768 32768/2
kmem_lock: 0.760000000 202/200/2048 6464/6400/65536 32768/3
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@135 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
longer be based on the linux slab but to be its own complete
implementation. The new slab behaves much more like the
Solaris slab than the Linux slab.
git-svn-id: https://outreach.scidac.gov/svn/spl/trunk@132 7e1ea52c-4ff2-0310-8f11-9dd32ca42a1c
