Commit Graph

55 Commits

Author SHA1 Message Date
Brian Behlendorf
519129ff4e Illumos 6815179, 6844191
6815179 zpool import with a large number of LUNs is too slow
6844191 zpool import, scanning of disks should be multi-threaded

References:
  https://github.com/illumos/illumos-gate/commit/4f67d75

Porting notes:
- This change was originally never ported to Linux due to it
  dependence on the thread pool interface.  This patch solves
  that issue by switching the code to use the existing taskq
  implementation which provides the same basic functionality.
  However, in order for this to work properly thread_init()
  and thread_fini() must be called around to taskq consumer
  to perform the needed thread initialization.

- The check_one_slice, nozpool_all_slices, and check_slices
  functions have been disabled for Linux.  They are difficult,
  but possible, to implement for Linux due to how partitions
  are get names.  Since this is only an optimization this code
  can be added at a latter date.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-22 09:39:46 -08:00
Brian Behlendorf
89666a8e1c Increase default user space stack size
Under RHEL6/CentOS6 the default stack size must be increased to 32K
to prevent overflowing the stack when running ztest.  This isn't an
issue for other distributions due to either the version of pthreads
or perhaps the compiler.  Doubling the stack size resolves the
issue safely for all distribution and leaves us some headroom.

$ sudo -E ztest -V -T 300 -f /var/tmp/
5 vdevs, 7 datasets, 23 threads, 300 seconds...

loading space map for vdev 0 of 1, metaslab 0 of 30 ...
...
loading space map for vdev 0 of 1, metaslab 14 of 30 ...
child died with signal 11
Exited ztest with error 3

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4215
2016-01-13 13:55:12 -08:00
Matthew Ahrens
9867e8be2a Illumos 4891 - want zdb option to dump all metadata
4891 want zdb option to dump all metadata
Reviewed by: Sonu Pillai <sonu.pillai@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Garrett D'Amore <garrett@damore.org>

We'd like a way for zdb to dump metadata in a machine-readable
format, so that we can bring that back from a customer site for
in-house diagnosis.  Think of it as a crash dump for zpools,
which can be used for post-mortem analysis of a malfunctioning
pool

References:
  https://www.illumos.org/issues/4891
  https://github.com/illumos/illumos-gate/commit/df15e41

Porting notes:
- [cmd/zdb/zdb.c]
  - a5778ea zdb: Introduce -V for verbatim import
  - In main() getopt 'opt' variable removed and the code was
    brought back in line with illumos.
- [lib/libzpool/kernel.c]
  - 1e33ac1 Fix Solaris thread dependency by using pthreads
  - f0e324f Update utsname support
  - 4d58b69 Fix vn_open/vn_rdwr error handling
  - In vn_open() allocate 'dumppath' on heap instead of stack
  - Properly handle 'dump_fd == -1' error path
  - Free 'realpath' after added vn_dumpdir_code block

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-11 11:36:54 -08:00
Paul Dagnelie
fcff0f35bd Illumos 5960, 5925
5960 zfs recv should prefetch indirect blocks
5925 zfs receive -o origin=
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>

References:
  https://www.illumos.org/issues/5960
  https://www.illumos.org/issues/5925
  https://github.com/illumos/illumos-gate/commit/a2cdcdd

Porting notes:
- [lib/libzfs/libzfs_sendrecv.c]
  - b8864a2 Fix gcc cast warnings
  - 325f023 Add linux kernel device support
  - 5c3f61e Increase Linux pipe buffer size on 'zfs receive'
- [module/zfs/zfs_vnops.c]
  - 3558fd7 Prototype/structure update for Linux
  - c12e3a5 Restructure zfs_readdir() to fix regressions
- [module/zfs/zvol.c]
  - Function @zvol_map_block() isn't needed in ZoL
  - 9965059 Prefetch start and end of volumes
- [module/zfs/dmu.c]
  - Fixed ISO C90 - mixed declarations and code
  - Function dmu_prefetch() 'int i' is initialized before
    the following code block (c90 vs. c99)
- [module/zfs/dbuf.c]
  - fc5bb51 Fix stack dbuf_hold_impl()
  - 9b67f60 Illumos 4757, 4913
  - 34229a2 Reduce stack usage for recursive traverse_visitbp()
- [module/zfs/dmu_send.c]
  - Fixed ISO C90 - mixed declarations and code
  - b58986e Use large stacks when available
  - 241b541 Illumos 5959 - clean up per-dataset feature count code
  - 77aef6f Use vmem_alloc() for nvlists
  - 00b4602 Add linux kernel memory support

Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2016-01-08 15:08:19 -08:00
Olaf Faaland
e0553a74ad Add lock types RW_NOLOCKDEP and MUTEX_NOLOCKDEP
Both lock types were introduced in SPL to allow some locks to be
taken/released with linux lockdep turned off.  See SPL commit for
details.

Add the new lock types to zfs_context.h to allow user space compilation.

Depends on SPL commit 692ae8d
SPL pull request refs/pull/480/head

Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3895
2015-12-22 10:20:29 -08:00
Brian Behlendorf
1229323d5f Align thread priority with Linux defaults
Under Linux filesystem threads responsible for handling I/O are
normally created with the maximum priority.  Non-I/O filesystem
processes run with the default priority.  ZFS should adopt the
same priority scheme under Linux to maintain good performance
and so that it will complete fairly when other Linux filesystems
are active.  The priorities have been updated to the following:

$ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta'
     -  TS 10743  19 -20 [spl_kmem_cache]
     -  TS 10744  19 -20 [spl_system_task]
     -  TS 10745  19 -20 [spl_dynamic_tas]
     -  TS 10764  19   0 [dbu_evict]
     -  TS 10765  19   0 [arc_prune]
     -  TS 10766  19   0 [arc_reclaim]
     -  TS 10767  19   0 [arc_user_evicts]
     -  TS 10768  19   0 [l2arc_feed]
     -  TS 10769  39   0 [z_unmount]
     -  TS 10770  39 -20 [zvol]
     -  TS 11011  39 -20 [z_null_iss]
     -  TS 11012  39 -20 [z_null_int]
     -  TS 11013  39 -20 [z_rd_iss]
     -  TS 11014  39 -20 [z_rd_int_0]
     -  TS 11022  38 -19 [z_wr_iss]
     -  TS 11023  39 -20 [z_wr_iss_h]
     -  TS 11024  39 -20 [z_wr_int_0]
     -  TS 11032  39 -20 [z_wr_int_h]
     -  TS 11033  39 -20 [z_fr_iss_0]
     -  TS 11041  39 -20 [z_fr_int]
     -  TS 11042  39 -20 [z_cl_iss]
     -  TS 11043  39 -20 [z_cl_int]
     -  TS 11044  39 -20 [z_ioctl_iss]
     -  TS 11045  39 -20 [z_ioctl_int]
     -  TS 11046  39 -20 [metaslab_group_]
     -  TS 11050  19   0 [z_iput]
     -  TS 11121  38 -19 [z_wr_iss]

Note that under Linux the meaning of a processes priority is inverted
with respect to illumos.  High values on Linux indicate a _low_ priority
while high value on illumos indicate a _high_ priority.

In order to preserve the logical meaning of the minclsyspri and
maxclsyspri macros when they are used by the illumos wrapper functions
their values have been inverted.  This way when changes are merged
from upstream illumos we won't need to remember to invert the macro.
It could also lead to confusion.

This patch depends on https://github.com/zfsonlinux/spl/pull/466.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #3607
2015-07-28 13:36:47 -07:00
Matthew Ahrens
ca67b33aba Illumos 5376 - arc_kmem_reap_now() should not result in clearing arc_no_grow
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5376
  https://github.com/illumos/illumos-gate/commit/2ec99e3

Porting Notes:

The good news is that many of the recent changes made upstream to the
ARC tackled issues previously observed by ZoL with similar solutions.
The bad news is those solution weren't identical to the ones we applied.
This patch is designed to split the difference and apply as much of the
upstream work as possible.

* The arc_available_memory() function was removed previous in ZoL but
due to the upstream changes it makes sense to add it back.  This function
has been customized for Linux so that it can be used to determine a low
memory.  This provides the same basic functionality as the illumos version
allowing us to minimize changes through the rest of the code base.  The
exact mechanism used to detect a low memory state remains unchanged so
this change isn't a significant as it might first appear.

* This patch includes the long standing fix for arc_shrink() which was
originally proposed in #2167.  Since there were related changes to this
function it made sense to include that work.

* The arc_init() function has been re-factored.  As before it sets sane
default values for the ARC but then calls arc_tuning_update() to apply
user specific tuning made via module options.  The arc_tuning_update()
function is then called periodically by the arc_reclaim_thread() to
apply changes to the tunings made during normal operation.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3616
Closes #2167
2015-07-23 09:41:28 -07:00
George Wilson
669dedb33f Illumos 5163 - arc should reap range_seg_cache
5163 arc should reap range_seg_cache
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/5163
  https://github.com/illumos/illumos-gate/commit/83803b5

Porting Notes:

Added umem_cache_reap_now() wrapped to suppress unused variable
warning for user space build in arc_kmem_reap_now().

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-06-25 08:58:16 -07:00
Brian Behlendorf
b64ccd6c52 Rename cv_wait_interruptible() to cv_wait_sig()
This is the counterpart to zfsonlinux/spl@2345368 which replaces the
cv_wait_interruptible() function with cv_wait_sig().  There is no
functional change to patch merely brings the function names in to
sync to maximize portability.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3450
Issue #3402
2015-06-11 10:50:47 -07:00
Brian Behlendorf
4f34bd9792 Add taskq_wait_outstanding() function
SPL commit behlendorf/spl@9cef1b5 adds the taskq_wait_outstanding()
interface.  See the commit log for the full justification for this
addition.  This patch adds the required user space counterpart.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
2015-06-11 10:27:25 -07:00
Prakash Surya
ca0bf58d65 Illumos 5497 - lock contention on arcs_mtx
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>

Porting notes and other significant code changes:

The illumos 5368 patch (ARC should cache more metadata), which
was never picked up by ZoL, is mostly reverted by this patch.

Since ZoL relies on the kernel asynchronously calling the shrinker to
actually reap memory, the shrinker wakes up arc_reclaim_waiters_cv every
time it runs.

The arc_adapt_thread() function no longer calls arc_do_user_evicts()
since the newly-added arc_user_evicts_thread() calls it periodically.

Notable conflicting ZoL commits which conflicted with this patch or
whose effects are either duplicated or un-done by this patch:

    302f753 - Integrate ARC more tightly with Linux
    39e055c - Adjust arc_p based on "bytes" in arc_shrink
    f521ce1 - Allow "arc_p" to drop to zero or grow to "arc_c"
    77765b5 - Remove "arc_meta_used" from arc_adjust calculation
    94520ca - Prune metadata from ghost lists in arc_adjust_meta

Trace support for multilist_insert() and multilist_remove() has been
added and produces the following output:

    fio-12498 [077] .... 112936.448324: zfs_multilist__insert: ml { offset 240 numsublists 80 sublistidx 63 }
    fio-12498 [077] .... 112936.448347: zfs_multilist__remove: ml { offset 240 numsublists 80 sublistidx 29 }

The following arcstats have been removed:

    recycle_miss - Used by arcstat.py and arc_summary.py, both of which
    have been updated appropriately.

    l2_writes_hdr_miss

The following arcstats have been added:

    evict_not_enough - Number of times arc_evict_state() was unable to
    evict enough buffers to reach its target amount.

    evict_l2_skip - Number of times arc_evict_hdr() skipped eviction
    because it was being written to the l2arc.

    l2_writes_lock_retry - Replaces l2_writes_hdr_miss.  Number of times
    l2arc_write_done() failed to acquire hash_lock (and re-tries).

    arc_meta_min - Shows the value of the zfs_arc_meta_min module
    parameter (see below).

The "index" column of the "dbuf" kstat has been removed since it doesn't
have a direct analog in the new multilist scheme.  Additional multilist-
related stats could be added in the future but would likely require
extensions to the mulilist API.

The following module parameters have been added:

    zfs_arc_evict_batch_limit - Number of ARC headers to free per sub-list
    before moving on to the next sub-list.

    zfs_arc_meta_min - Enforce a floor on the amount of metadata in
    the ARC.

    zfs_arc_num_sublists_per_state - Number of multilist sub-lists per
    ARC state.

    zfs_arc_overflow_shift - Controls amount by which the ARC must exceed
    the target size to be considered "overflowing".

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov
2015-06-11 10:27:25 -07:00
Tim Chase
40d06e3c78 Mark all ZPL and ioctl functions as PF_FSTRANS
Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl
calls as well as the l2arc and adapt ARC threads.

This obviates the need for MUTEX_FSTRANS so its previous uses and
definition have been eliminated.

Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #3225
2015-04-03 11:38:59 -07:00
Brian Behlendorf
4ec15b8dcf Use MUTEX_FSTRANS mutex type
There are regions in the ZFS code where it is desirable to be able
to be set PF_FSTRANS while a specific mutex is held.  The ZFS code
could be updated to set/clear this flag in all the correct places,
but this is undesirable for a few reasons.

1) It would require changes to a significant amount of the ZFS
   code.  This would complicate applying patches from upstream.

2) It would be easy to accidentally miss a critical region in
   the initial patch or to have an future change introduce a
   new one.

Both of these concerns can be addressed by using a new mutex type
which is responsible for managing PF_FSTRANS, support for which was
added to the SPL in commit zfsonlinux/spl@9099312 - Merge branch
'kmem-rework'.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #3050
Closes #3055
Closes #3062
Closes #3132
Closes #3142
Closes #2983
2015-03-03 10:46:40 -08:00
Brian Behlendorf
60e1eda929 Add kmem_cache.h include to default context
As part of the spl kmem/vmem refactoring the kmem_cache_* functions
were split in to their own kmem_cache.h header.  This was done in
part so that kmem_* consumers would not be forced to include the
kmem_cache_* functions which mask several Linux SLAB/SLAB functions.

Because of this we now much explicitly include kmem_cache.h in the
zfs_context.h.  However, consumers such as Lustre which need access
to the KM_FLAGS but not the kmem_cache_* functions can now safely
just include kmem.h.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:41:28 -08:00
Brian Behlendorf
79c76d5b65 Change KM_PUSHPAGE -> KM_SLEEP
By marking DMU transaction processing contexts with PF_FSTRANS
we can revert the KM_PUSHPAGE -> KM_SLEEP changes.  This brings
us back in line with upstream.  In some cases this means simply
swapping the flags back.  For others fnvlist_alloc() was replaced
by nvlist_alloc(..., KM_PUSHPAGE) and must be reverted back to
fnvlist_alloc() which assumes KM_SLEEP.

The one place KM_PUSHPAGE is kept is when allocating ARC buffers
which allows us to dip in to reserved memory.  This is again the
same as upstream.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:41:26 -08:00
Brian Behlendorf
efcd79a883 Retire KM_NODEBUG
Callers of kmem_alloc() which passed the KM_NODEBUG flag to suppress
the large allocation warning have been replaced by vmem_alloc() as
appropriate.  The updated vmem_alloc() call will not print a warning
regardless of the size of the allocation.

A careful reader will notice that not all callers have been changed
to vmem_alloc().  Some have only had the KM_NODEBUG flag removed.
This was possible because the default warning threshold has been
increased to 32k.  This is desirable because it minimizes the need
for Linux specific code changes.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:40:32 -08:00
Brian Behlendorf
92119cc259 Mark IO pipeline with PF_FSTRANS
In order to avoid deadlocking in the IO pipeline it is critical that
pageout be avoided during direct memory reclaim.  This ensures that
the pipeline threads can always make forward progress and never end
up blocking on a DMU transaction.  For this very reason Linux now
provides the PF_FSTRANS flag which may be set in the process context.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2015-01-16 14:28:05 -08:00
Prakash Surya
0b39b9f96f Swap DTRACE_PROBE* with Linux tracepoints
This patch leverages Linux tracepoints from within the ZFS on Linux
code base. It also refactors the debug code to bring it back in sync
with Illumos.

The information exported via tracepoints can be used for a variety of
reasons (e.g. debugging, tuning, general exploration/understanding,
etc). It is advantageous to use Linux tracepoints as the mechanism to
export this kind of information (as opposed to something else) for a
number of reasons:

    * A number of external tools can make use of our tracepoints
      "automatically" (e.g. perf, systemtap)
    * Tracepoints are designed to be extremely cheap when disabled
    * It's one of the "accepted" ways to export this kind of
      information; many other kernel subsystems use tracepoints too.

Unfortunately, though, there are a few caveats as well:

    * Linux tracepoints appear to only be available to GPL licensed
      modules due to the way certain kernel functions are exported.
      Thus, to actually make use of the tracepoints introduced by this
      patch, one might have to patch and re-compile the kernel;
      exporting the necessary functions to non-GPL modules.

    * Prior to upstream kernel version v3.14-rc6-30-g66cc69e, Linux
      tracepoints are not available for unsigned kernel modules
      (tracepoints will get disabled due to the module's 'F' taint).
      Thus, one either has to sign the zfs kernel module prior to
      loading it, or use a kernel versioned v3.14-rc6-30-g66cc69e or
      newer.

Assuming the above two requirements are satisfied, lets look at an
example of how this patch can be used and what information it exposes
(all commands run as 'root'):

    # list all zfs tracepoints available

    $ ls /sys/kernel/debug/tracing/events/zfs
    enable              filter              zfs_arc__delete
    zfs_arc__evict      zfs_arc__hit        zfs_arc__miss
    zfs_l2arc__evict    zfs_l2arc__hit      zfs_l2arc__iodone
    zfs_l2arc__miss     zfs_l2arc__read     zfs_l2arc__write
    zfs_new_state__mfu  zfs_new_state__mru

    # enable all zfs tracepoints, clear the tracepoint ring buffer

    $ echo 1 > /sys/kernel/debug/tracing/events/zfs/enable
    $ echo 0 > /sys/kernel/debug/tracing/trace

    # import zpool called 'tank', inspect tracepoint data (each line was
    # truncated, they're too long for a commit message otherwise)

    $ zpool import tank
    $ cat /sys/kernel/debug/tracing/trace | head -n35
    # tracer: nop
    #
    # entries-in-buffer/entries-written: 1219/1219   #P:8
    #
    #                              _-----=> irqs-off
    #                             / _----=> need-resched
    #                            | / _---=> hardirq/softirq
    #                            || / _--=> preempt-depth
    #                            ||| /     delay
    #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
    #              | |       |   ||||       |         |
            lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss: hdr...
          z_rd_int/0-30156 [003] .... 91344.200611: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.201173: zfs_arc__miss: hdr...
          z_rd_int/1-30157 [003] .... 91344.201756: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.201795: zfs_arc__miss: hdr...
          z_rd_int/2-30158 [003] .... 91344.202099: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202126: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202130: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202134: zfs_arc__hit: hdr ...
            lt-zpool-30132 [003] .... 91344.202146: zfs_arc__miss: hdr...
          z_rd_int/3-30159 [003] .... 91344.202457: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202484: zfs_arc__miss: hdr...
          z_rd_int/4-30160 [003] .... 91344.202866: zfs_new_state__mru...
            lt-zpool-30132 [003] .... 91344.202891: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.203034: zfs_arc__miss: hdr...
          z_rd_iss/1-30149 [001] .... 91344.203749: zfs_new_state__mru...
            lt-zpool-30132 [001] .... 91344.203789: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.203878: zfs_arc__miss: hdr...
          z_rd_iss/3-30151 [001] .... 91344.204315: zfs_new_state__mru...
            lt-zpool-30132 [001] .... 91344.204332: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204337: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204352: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204356: zfs_arc__hit: hdr ...
            lt-zpool-30132 [001] .... 91344.204360: zfs_arc__hit: hdr ...

To highlight the kind of detailed information that is being exported
using this infrastructure, I've taken the first tracepoint line from the
output above and reformatted it such that it fits in 80 columns:

    lt-zpool-30132 [003] .... 91344.200050: zfs_arc__miss:
        hdr {
            dva 0x1:0x40082
            birth 15491
            cksum0 0x163edbff3a
            flags 0x640
            datacnt 1
            type 1
            size 2048
            spa 3133524293419867460
            state_type 0
            access 0
            mru_hits 0
            mru_ghost_hits 0
            mfu_hits 0
            mfu_ghost_hits 0
            l2_hits 0
            refcount 1
        } bp {
            dva0 0x1:0x40082
            dva1 0x1:0x3000e5
            dva2 0x1:0x5a006e
            cksum 0x163edbff3a:0x75af30b3dd6:0x1499263ff5f2b:0x288bd118815e00
            lsize 2048
        } zb {
            objset 0
            object 0
            level -1
            blkid 0
        }

For the specific tracepoint shown here, 'zfs_arc__miss', data is
exported detailing the arc_buf_hdr_t (hdr), blkptr_t (bp), and
zbookmark_t (zb) that caused the ARC miss (down to the exact DVA!).
This kind of precise and detailed information can be extremely valuable
when trying to answer certain kinds of questions.

For anybody unfamiliar but looking to build on this, I found the XFS
source code along with the following three web links to be extremely
helpful:

    * http://lwn.net/Articles/379903/
    * http://lwn.net/Articles/381064/
    * http://lwn.net/Articles/383362/

I should also node the more "boring" aspects of this patch:

    * The ZFS_LINUX_COMPILE_IFELSE autoconf macro was modified to
       support a sixth paramter. This parameter is used to populate the
       contents of the new conftest.h file. If no sixth parameter is
       provided, conftest.h will be empty.

    * The ZFS_LINUX_TRY_COMPILE_HEADER autoconf macro was introduced.
      This macro is nearly identical to the ZFS_LINUX_TRY_COMPILE macro,
      except it has support for a fifth option that is then passed as
      the sixth parameter to ZFS_LINUX_COMPILE_IFELSE.

These autoconf changes were needed to test the availability of the Linux
tracepoint macros. Due to the odd nature of the Linux tracepoint macro
API, a separate ".h" must be created (the path and filename is used
internally by the kernel's define_trace.h file).

    * The HAVE_DECLARE_EVENT_CLASS autoconf macro was introduced. This
      is to determine if we can safely enable the Linux tracepoint
      functionality. We need to selectively disable the tracepoint code
      due to the kernel exporting certain functions as GPL only. Without
      this check, the build process will fail at link time.

In addition, the SET_ERROR macro was modified into a tracepoint as well.
To do this, the 'sdt.h' file was moved into the 'include/sys' directory
and now contains a userspace portion and a kernel space portion. The
dprintf and zfs_dbgmsg* interfaces are now implemented as tracepoint as
well.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2014-11-17 11:13:55 -08:00
Brian Behlendorf
f0e324f25d Update utsname support
Modify the code to use the utsname() kernel function rather than
a global variable.  This results is cleaner more portable code
because utsname() is already provided by the kernel and can be
easily emulated in user space via uname(2).  This means that it
will behave consistently in both contexts.

This is also has the benefit that it allows the removal of a few
_KERNEL pre-processor conditions.  And it also is a pre-requisite
for a proper FUSE port because we need to provide a valid utsname.

Finally, it allows us to remove this functionality from the SPL
and all the related compatibility code.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2757
2014-10-17 14:58:57 -07:00
Brian Behlendorf
aa0ac7caa4 Make user stack limit configurable
To aid in detecting and debugging stack overflow issues make the
user space stack limit configurable via a new ZFS_STACK_SIZE
environment variable.  The value assigned to ZFS_STACK_SIZE will
be used as the default stack size in bytes.

Because this is mainly useful as a debugging aid in conjunction
with ztest the stack limit is disabled by default.  See the ztest(1)
man page for additional details on using the ZFS_STACK_SIZE
environment variable.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes #2743
Issue #2293
2014-09-30 10:46:55 -07:00
Alec Salazar
22a11a5b5a Replace __va_list with va_list
Most of the code base already uses va_list, which is specified by
iso-c. gcc/glibc provides 'typedef __gnuc_va_list va_list'. and
when not using gcc/glibc we can't expect to find __gnuc_va_list.

Signed-off-by: Alec Salazar <alec.j.salazar@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2588
2014-08-13 10:35:00 -07:00
Matthew Ahrens
9bd274ddd8 Illumos #4374
4374 dn_free_ranges should use range_tree_t

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Max Grossman <max.grossman@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>

References:
  https://www.illumos.org/issues/4374
  https://github.com/illumos/illumos-gate/commit/bf16b11

Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2531
2014-07-30 09:20:35 -07:00
Richard Yao
3af3df905f libspl: Implement LWP rwlock interface
This implements a subset of the LWP rwlock interface by wrapping the
equivalent POSIX thread interface. It is a superset of the features
needed by ztest.

The missing bits are {,_}rw_read_held() and {,_}rw_write_held().

Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1970
2014-05-01 15:53:52 -07:00
Chunwei Chen
0b75bdb369 Use ddi_time_after and friends to compare time
Also, make sure we use clock_t for ddi_get_lbolt to prevent type conversion
from screwing things.

Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #2142
2014-04-14 13:27:56 -07:00
Michael Kjorling
d1d7e2689d cstyle: Resolve C style issues
The vast majority of these changes are in Linux specific code.
They are the result of not having an automated style checker to
validate the code when it was originally written.  Others were
caused when the common code was slightly adjusted for Linux.

This patch contains no functional changes.  It only refreshes
the code to conform to style guide.

Everyone submitting patches for inclusion upstream should now
run 'make checkstyle' and resolve any warning prior to opening
a pull request.  The automated builders have been updated to
fail a build if when 'make checkstyle' detects an issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1821
2013-12-18 16:46:35 -08:00
Matthew Ahrens
e8b96c6007 Illumos #4045 write throttle & i/o scheduler performance work
4045 zfs write throttle & i/o scheduler performance work

1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync
read, sync write, async read, async write, and scrub/resilver.  The scheduler
issues a number of concurrent i/os from each class to the device.  Once a class
has been selected, an i/o is selected from this class using either an elevator
algorithem (async, scrub classes) or FIFO (sync classes).  The number of
concurrent async write i/os is tuned dynamically based on i/o load, to achieve
good sync i/o latency when there is not a high load of writes, and good write
throughput when there is.  See the block comment in vdev_queue.c (reproduced
below) for more details.

2. The write throttle (dsl_pool_tempreserve_space() and
txg_constrain_throughput()) is rewritten to produce much more consistent delays
when under constant load.  The new write throttle is based on the amount of
dirty data, rather than guesses about future performance of the system.  When
there is a lot of dirty data, each transaction (e.g. write() syscall) will be
delayed by the same small amount.  This eliminates the "brick wall of wait"
that the old write throttle could hit, causing all transactions to wait several
seconds until the next txg opens.  One of the keys to the new write throttle is
decrementing the amount of dirty data as i/o completes, rather than at the end
of spa_sync().  Note that the write throttle is only applied once the i/o
scheduler is issuing the maximum number of outstanding async writes.  See the
block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for
more details.

This diff has several other effects, including:

 * the commonly-tuned global variable zfs_vdev_max_pending has been removed;
use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead.

 * the size of each txg (meaning the amount of dirty data written, and thus the
time it takes to write out) is now controlled differently.  There is no longer
an explicit time goal; the primary determinant is amount of dirty data.
Systems that are under light or medium load will now often see that a txg is
always syncing, but the impact to performance (e.g. read latency) is minimal.
Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this.

 * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression,
checksum, etc.  This improves latency by not allowing these CPU-intensive tasks
to consume all CPU (on machines with at least 4 CPU's; the percentage is
rounded up).

--matt

APPENDIX: problems with the current i/o scheduler

The current ZFS i/o scheduler (vdev_queue.c) is deadline based.  The problem
with this is that if there are always i/os pending, then certain classes of
i/os can see very long delays.

For example, if there are always synchronous reads outstanding, then no async
writes will be serviced until they become "past due".  One symptom of this
situation is that each pass of the txg sync takes at least several seconds
(typically 3 seconds).

If many i/os become "past due" (their deadline is in the past), then we must
service all of these overdue i/os before any new i/os.  This happens when we
enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in
the future.  If we can't complete all the i/os in 2.5 seconds (e.g. because
there were always reads pending), then these i/os will become past due.  Now we
must service all the "async" writes (which could be hundreds of megabytes)
before we service any reads, introducing considerable latency to synchronous
i/os (reads or ZIL writes).

Notes on porting to ZFS on Linux:

- zio_t gained new members io_physdone and io_phys_children.  Because
  object caches in the Linux port call the constructor only once at
  allocation time, objects may contain residual data when retrieved
  from the cache. Therefore zio_create() was updated to zero out the two
  new fields.

- vdev_mirror_pending() relied on the depth of the per-vdev pending queue
  (vq->vq_pending_tree) to select the least-busy leaf vdev to read from.
  This tree has been replaced by vq->vq_active_tree which is now used
  for the same purpose.

- vdev_queue_init() used the value of zfs_vdev_max_pending to determine
  the number of vdev I/O buffers to pre-allocate.  That global no longer
  exists, so we instead use the sum of the *_max_active values for each of
  the five I/O classes described above.

- The Illumos implementation of dmu_tx_delay() delays a transaction by
  sleeping in condition variable embedded in the thread
  (curthread->t_delay_cv).  We do not have an equivalent CV to use in
  Linux, so this change replaced the delay logic with a wrapper called
  zfs_sleep_until(). This wrapper could be adopted upstream and in other
  downstream ports to abstract away operating system-specific delay logic.

- These tunables are added as module parameters, and descriptions added
  to the zfs-module-parameters.5 man page.

  spa_asize_inflation
  zfs_deadman_synctime_ms
  zfs_vdev_max_active
  zfs_vdev_async_write_active_min_dirty_percent
  zfs_vdev_async_write_active_max_dirty_percent
  zfs_vdev_async_read_max_active
  zfs_vdev_async_read_min_active
  zfs_vdev_async_write_max_active
  zfs_vdev_async_write_min_active
  zfs_vdev_scrub_max_active
  zfs_vdev_scrub_min_active
  zfs_vdev_sync_read_max_active
  zfs_vdev_sync_read_min_active
  zfs_vdev_sync_write_max_active
  zfs_vdev_sync_write_min_active
  zfs_dirty_data_max_percent
  zfs_delay_min_dirty_percent
  zfs_dirty_data_max_max_percent
  zfs_dirty_data_max
  zfs_dirty_data_max_max
  zfs_dirty_data_sync
  zfs_delay_scale

  The latter four have type unsigned long, whereas they are uint64_t in
  Illumos.  This accommodates Linux's module_param() supported types, but
  means they may overflow on 32-bit architectures.

  The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most
  likely to overflow on 32-bit systems, since they express physical RAM
  sizes in bytes.  In fact, Illumos initializes zfs_dirty_data_max_max to
  2^32 which does overflow. To resolve that, this port instead initializes
  it in arc_init() to 25% of physical RAM, and adds the tunable
  zfs_dirty_data_max_max_percent to override that percentage.  While this
  solution doesn't completely avoid the overflow issue, it should be a
  reasonable default for most systems, and the minority of affected
  systems can work around the issue by overriding the defaults.

- Fixed reversed logic in comment above zfs_delay_scale declaration.

- Clarified comments in vdev_queue.c regarding when per-queue minimums take
  effect.

- Replaced dmu_tx_write_limit in the dmu_tx kstat file
  with dmu_tx_dirty_delay and dmu_tx_dirty_over_max.  The first counts
  how many times a transaction has been delayed because the pool dirty
  data has exceeded zfs_delay_min_dirty_percent.  The latter counts how
  many times the pool dirty data has exceeded zfs_dirty_data_max (which
  we expect to never happen).

- The original patch would have regressed the bug fixed in
  zfsonlinux/zfs@c418410, which prevented users from setting the
  zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE.
  A similar fix is added to vdev_queue_aggregate().

- In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the
  heap instead of the stack.  In Linux we can't afford such large
  structures on the stack.

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brendan Gregg <brendan.gregg@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  http://www.illumos.org/issues/4045
  illumos/illumos-gate@69962b5647

Ported-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1913
2013-12-06 09:32:43 -08:00
Matthew Ahrens
498877baf5 Illumos #3112, #3113, #3114
3112 ztest does not honor ZFS_DEBUG
3113 ztest should use watchpoints to protect frozen arc bufs
3114 some leaked nvlists in zfsdev_ioctl

Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Amdur <Matt.Amdur@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  https://www.illumos.org/issues/3112
  https://www.illumos.org/issues/3113
  https://www.illumos.org/issues/3114
  illumos/illumos-gate@cd1c8b85eb

The /proc/self/cmd watchpoint interface is specific to Solaris.
Therefore, the #3113 implementation was reworked to use the more
portable mprotect(2) system call.  When the pages are watched they
are marked read-only for protection.  Any write to the protected
address range immediately trigger a SIGSEGV.  The pages are marked
writable again when they are unwatched.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1489
2013-11-05 12:14:48 -08:00
Adam Leventhal
63fd3c6cfd Illumos #3582, #3584
3582 zfs_delay() should support a variable resolution
3584 DTrace sdt probes for ZFS txg states

Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@dey-sys.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
    https://www.illumos.org/issues/3582
    illumos/illumos-gate@0689f76

Ported by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775
2013-11-04 10:55:25 -08:00
Matthew Ahrens
2e528b49f8 Illumos #3598
3598 want to dtrace when errors are generated in zfs
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/3598
  illumos/illumos-gate@be6fd75a69

Ported-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1775

Porting notes:

1. include/sys/zfs_context.h has been modified to render some new
   macros inert until dtrace is available on Linux.

2. Linux-specific changes have been adapted to use SET_ERROR().

3. I'm NOT happy about this change.  It does nothing but ugly
   up the code under Linux.  Unfortunately we need to take it to
   avoid more merge conflicts in the future.  -Brian
2013-10-31 14:58:04 -07:00
Matthew Ahrens
330847ff36 Illumos #3537
3537 want pool io kstats

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Sa?o Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Brendan Gregg <brendan.gregg@joyent.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References:
  http://www.illumos.org/issues/3537
  illumos/illumos-gate@c3a6601

Ported by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

Porting Notes:

1. The patch was restructured to take advantage of the existing
   spa statistics infrastructure.  To accomplish this the kstat
   was moved in to spa->io_stats and the init/destroy code moved
   to spa_stats.c.

2. The I/O kstat was simply named <pool> which conflicted with the
   pool directory we had already created.  Therefore it was renamed
   to <pool>/io

3. An update handler was added to allow the kstat to be zeroed.
2013-10-31 09:16:03 -07:00
Prakash Surya
1421c89142 Add visibility in to arc_read
This change is an attempt to add visibility into the arc_read calls
occurring on a system, in real time. To do this, a list was added to the
in memory SPA data structure for a pool, with each element on the list
corresponding to a call to arc_read. These entries are then exported
through the kstat interface, which can then be interpreted in userspace.

For each arc_read call, the following information is exported:

 * A unique identifier (uint64_t)
 * The time the entry was added to the list (hrtime_t)
   (*not* wall clock time; relative to the other entries on the list)
 * The objset ID (uint64_t)
 * The object number (uint64_t)
 * The indirection level (uint64_t)
 * The block ID (uint64_t)
 * The name of the function originating the arc_read call (char[24])
 * The arc_flags from the arc_read call (uint32_t)
 * The PID of the reading thread (pid_t)
 * The command or name of thread originating read (char[16])

From this exported information one can see, in real time, exactly what
is being read, what function is generating the read, and whether or not
the read was found to be already cached.

There is still some work to be done, but this should serve as a good
starting point.

Specifically, dbuf_read's are not accounted for in the currently
exported information. Thus, a follow up patch should probably be added
to export these calls that never call into arc_read (they only hit the
dbuf hash table). In addition, it might be nice to create a utility
similar to "arcstat.py" to digest the exported information and display
it in a more readable format. Or perhaps, log the information and allow
for it to be "replayed" at a later time.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-10-25 13:57:25 -07:00
Matthew Ahrens
13fe019870 Illumos #3464
3464 zfs synctask code needs restructuring
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
  https://www.illumos.org/issues/3464
  illumos/illumos-gate@3b2aab1880

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1495
2013-09-04 16:01:24 -07:00
Matthew Ahrens
6f1ffb0665 Illumos #2882, #2883, #2900
2882 implement libzfs_core
2883 changing "canmount" property to "on" should not always remount dataset
2900 "zfs snapshot" should be able to create multiple, arbitrary snapshots at once

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Siden <christopher.siden@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2882
  https://www.illumos.org/issues/2883
  https://www.illumos.org/issues/2900
  illumos/illumos-gate@4445fffbbb

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1293

Porting notes:

WARNING: This patch changes the user/kernel ABI.  That means that
the zfs/zpool utilities built from master are NOT compatible with
the 0.6.2 kernel modules.  Ensure you load the matching kernel
modules from master after updating the utilities.  Otherwise the
zfs/zpool commands will be unable to interact with your pool and
you will see errors similar to the following:

  $ zpool list
  failed to read pool configuration: bad address
  no pools available

  $ zfs list
  no datasets available

Add zvol minor device creation to the new zfs_snapshot_nvl function.

Remove the logging of the "release" operation in
dsl_dataset_user_release_sync().  The logging caused a null dereference
because ds->ds_dir is zeroed in dsl_dataset_destroy_sync() and the
logging functions try to get the ds name via the dsl_dataset_name()
function. I've got no idea why this particular code would have worked
in Illumos.  This code has subsequently been completely reworked in
Illumos commit 3b2aab1 (3464 zfs synctask code needs restructuring).

Squash some "may be used uninitialized" warning/erorrs.

Fix some printf format warnings for %lld and %llu.

Apply a few spa_writeable() changes that were made to Illumos in
illumos/illumos-gate.git@cd1c8b8 as part of the 3112, 3113, 3114 and
3115 fixes.

Add a missing call to fnvlist_free(nvl) in log_internal() that was added
in Illumos to fix issue 3085 but couldn't be ported to ZoL at the time
(zfsonlinux/zfs@9e11c73) because it depended on future work.
2013-09-04 15:49:00 -07:00
Madhav Suresh
c99c90015e Illumos #3006
3006 VERIFY[S,U,P] and ASSERT[S,U,P] frequently check if first
     argument is zero

Reviewed by Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by George Wilson <george.wilson@delphix.com>
Approved by Eric Schrock <eric.schrock@delphix.com>

References:
  illumos/illumos-gate@fb09f5aad4
  https://illumos.org/issues/3006

Requires:
  zfsonlinux/spl@1c6d149feb

Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1509
2013-06-19 15:14:10 -07:00
Brian Behlendorf
044baf009a Use taskq for dump_bytes()
The vn_rdwr() function performs I/O by calling the vfs_write() or
vfs_read() functions.  These functions reside just below the system
call layer and the expectation is they have almost the entire 8k of
stack space to work with.  In fact, certain layered configurations
such as ext+lvm+md+multipath require the majority of this stack to
avoid stack overflows.

To avoid this posibility the vn_rdwr() call in dump_bytes() has been
moved to the ZIO_TYPE_FREE, taskq.  This ensures that all I/O will be
performed with the majority of the stack space available.  This ends
up being very similiar to as if the I/O were issued via sys_write()
or sys_read().

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1399
Closes #1423
2013-05-06 14:05:42 -07:00
George.Wilson
cc92e9d0c3 3246 ZFS I/O deadman thread
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>

NOTES: This patch has been reworked from the original in the
following ways to accomidate Linux ZFS implementation

*) Usage of the cyclic interface was replaced by the delayed taskq
   interface.  This avoids the need to implement new compatibility
   code and allows us to rely on the existing taskq implementation.

*) An extern for zfs_txg_synctime_ms was added to sys/dsl_pool.h
   because declaring externs in source files as was done in the
   original patch is just plain wrong.

*) Instead of panicing the system when the deadman triggers a
   zevent describing the blocked vdev and the first pending I/O
   is posted.  If the panic behavior is desired Linux provides
   other generic methods to panic the system when threads are
   observed to hang.

*) For reference, to delay zios by 30 seconds for testing you can
   use zinject as follows: 'zinject -d <vdev> -D30 <pool>'

References:
  illumos/illumos-gate@283b84606b
  https://www.illumos.org/issues/3246

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1396
2013-05-01 17:05:52 -07:00
Brian Behlendorf
79c6e4c445 Remove NPTL_GUARD_WITHIN_STACK
Commit 4b2f65b253 increased the user
space stack by 4x to resolve certain stack overflows.  As such it
no longer makes sense to worry about a single extra page which
might or might not be part of the process stack.  There is now
ample headroom for normal usage.

By eliminating this configure check we are also resolving the
following segfault which intentionally occurs at configure time
and may be logged in dmesg.

  conftest[22156]: segfault at 7fbf18a47e48 ip 00000000004007fe
  sp 00007fbf18a4be50 error 6 in conftest[400000+1000]

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-29 10:58:20 -08:00
Matt Johnston
72938d6905 Use cv_wait_io() which will will account for iowait
Update zio_wait() to use cv_wait_io() to ensure the iowait time
is properly accounted for.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-07 10:52:52 -08:00
Etienne Dechamps
274091c074 Fix VOP_CLOSE() in userspace.
Currently, for unknown reasons, VOP_CLOSE() is a no-op in userspace.
This causes file descriptor leaks. This is especially problematic with
long ztest runs, since zpool.cache is opened repeatedly and never
closed, resulting in resource exhaustion (EMFILE errors).

This patch fixes the issue by making VOP_CLOSE() do what it is supposed
to do.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
2012-10-03 13:32:48 -07:00
Etienne Dechamps
0aebd4f9e3 Create threads in detached state in userspace.
Currently, thread_create(), when called in userspace, creates a
joinable (i.e. not detached thread). This is the pthread default.

Unfortunately, this does not reproduce kthreads behavior (kthreads
are always detached). In addition, this contradicts the original
Solaris code which creates userspace threads in detached mode.

These joinable threads are never joined, which leads to a leakage of
pthread thread objects ("zombie threads"). This in turn results in
excessive ressource consumption, and possible ressource exhaustion in
extreme cases (e.g. long ztest runs).

This patch fixes the issue by creating userspace threads in detached
mode. The only exception is ztest worker threads which are meant to be
joinable.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
2012-10-03 13:32:48 -07:00
Bill Pijewski
37abac6d55 Illumos #2703: add mechanism to report ZFS send progress
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2703

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-19 13:39:06 -07:00
Brian Behlendorf
0ef0ff546e Switch KM_SLEEP to KM_PUSHPAGE
This warning indicates the incorrect use of KM_SLEEP in a call
path which must use KM_PUSHPAGE to avoid deadlocking in direct
reclaim.  See commit b8d06fca08
for additional details.

  SPL: Fixing allocation for task txg_sync (6093) which
  used GFP flags 0x297bda7c with PF_NOFS set

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #917
2012-09-04 16:00:06 -07:00
Richard Yao
44f21da41c Revert Disable direct reclaim for z_wr_* threads
This commit used PF_MEMALLOC to prevent a memory reclaim deadlock.
However, commit 49be0ccf1f eliminated
the invocation of __cv_init(), which was the cause of the deadlock.
PF_MEMALLOC has the side effect of permitting pages from ZONE_DMA
to be allocated.  The use of PF_MEMALLOC was found to cause stability
problems when doing swap on zvols. Since this technique is known to
cause problems and no longer fixes anything, we revert it.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #726
2012-08-27 12:01:37 -07:00
Prakash Surya
15a9e03368 Wrap smp_processor_id in kpreempt_[dis|en]able
After surveying the code, the few places where smp_processor_id is used
were deemed to be safe to use with a preempt enabled kernel. As such, no
core logic had to be changed. These smp_processor_id call sites are simply
are wrapped in kpreempt_disable and kpreempt_enabled to prevent the
Linux kernel from emitting scary warnings.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Issue #83
2012-08-24 13:19:06 -07:00
Dan McDonald
d96eb2b153 Illumos #1693: persistent 'comment' field for a zpool
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1693

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #678
2012-08-08 11:49:37 -07:00
Brian Behlendorf
d7e398ce1a Cleanup ZFS debug infrastructure
Historically the internal zfs debug infrastructure has been
scattered throughout the code.  Since we expect to start making
more use of this code this patch performs some cleanup.

* Consolidate the zfs debug infrastructure in the zfs_debug.[ch]
  files.  This includes moving the zfs_flags and zfs_recover
  variables, plus moving the zfs_panic_recover() function.

* Remove the existing unused functionality in zfs_debug.c and
  replace it with code which correctly utilized the spl logging
  infrastructure.

* Remove the __dprintf() function from zfs_ioctl.c.  This is
  dead code, the dprintf() functionality in the kernel relies
  on the spl log support.

* Remove dprintf() from hdr_recl().  This wasn't particularly
  useful and was missing the required format specifier anyway.

* Subsequent patches should unify the dprintf() and zfs_dbgmsg()
  functions.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-02-02 11:24:30 -08:00
Garrett D'Amore
a38718a63d Illumos #734: Use taskq_dispatch_ent() interface
It has been observed that some of the hottest locks are those
of the zio taskqs.  Contention on these locks can limit the
rate at which zios are dispatched which limits performance.

This upstream change from Illumos uses new interface to the
taskqs which allow them to utilize a prealloc'ed taskq_ent_t.
This removes the need to perform an allocation at dispatch
time while holding the contended lock.  This has the effect
of improving system performance.

Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Alexey Zaytsev <alexey.zaytsev@nexenta.com>
Reviewed by: Jason Brian King <jason.brian.king@gmail.com>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>

References to Illumos issue:
  https://www.illumos.org/issues/734

Ported-by: Prakash Surya <surya1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #482
2011-12-14 09:19:30 -08:00
Brian Behlendorf
ae6ba3dbe6 Improve meta data performance
Profiling the system during meta data intensive workloads such
as creating/removing millions of files, revealed that the system
was cpu bound.  A large fraction of that cpu time was being spent
waiting on the virtual address space spin lock.

It turns out this was caused by certain heavily used kmem_caches
being backed by virtual memory.  By default a kmem_cache will
dynamically determine the type of memory used based on the object
size.  For large objects virtual memory is usually preferable
and for small object physical memory is a better choice.  See
the spl_slab_alloc() function for a longer discussion on this.

However, there is a certain amount of gray area when defining a
'large' object.  For the following caches it turns out they were
just over the line:

  * dnode_cache
  * zio_cache
  * zio_link_cache
  * zio_buf_512_cache
  * zfs_data_buf_512_cache

Now because we know there will be a lot of churn in these caches,
and because we know the slabs will still be reasonably sized.
We can safely request with the KMC_KMEM flag that the caches be
backed with physical memory addresses.  This entirely avoids the
need to serialize on the virtual address space lock.

As a bonus this also reduces our vmalloc usage which will be good
for 32-bit kernels which have a very small virtual address space.
It will also probably be good for interactive performance since
unrelated processes could also block of this same global lock.
Finally, we may see less cpu time being burned in the arc_reclaim
and txg_sync_threads.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #258
2011-11-03 10:19:21 -07:00
Brian Behlendorf
21ade34764 Disable direct reclaim for z_wr_* threads
The direct reclaim path in the z_wr_* threads must be disabled
to ensure forward progress is always maintained for txg processing.
This ensures that a txg will never get stuck waiting on itself
because it entered the following memory reclaim callpath.

  ->prune_icache()->dispose_list()->zpl_clear_inode()->zfs_inactive()
  ->dmu_tx_assign()->dmu_tx_wait()->tgx_wait_open()

It would be preferable to target this exact code path but the
kernel offers no way to do this without custom patches.  To avoid
this we are forced to disable all reclaim for these threads.  It
should not be necessary to do this for other other z_* threads
because they will not hold a txg open.

Closes #232
2011-05-06 15:26:26 -07:00
Brian Behlendorf
e88b041ed6 Fix libzpool cv_* build error
This build failure was accidentally introduced by previous commit
bfd214a which fixed the load average.  Unfortunately, the wrapper
for cv_wait_interruptible was not available in the zfs_context.h
user compatibility code.  I failed to notice this because I didn't
rebuild everything cleanly before committing.

  undefined reference to `cv_wait_interruptible'
  collect2: ld returned 1 exit status

Closes #181
2011-03-31 12:20:53 -07:00