Reintroduce a slightly adapted version of the Illumos logic for
synchronous unlinks. The basic idea here is that only files
smaller than zfs_delete_blocks (20480) blocks should be deleted
synchronously. Unlinking larger files should be handled
asynchronously to minimize impact to the caller.
To accomplish this iput() which is responsible for calling
zfs_znode_delete() on Linux is only called in the delete_now
path. Otherwise zfs_async_iput() is used which allows the
last reference to be dropped by a taskq thread effectively
making the removal asynchronous.
Porting notes:
- Add zfs_delete_blocks module option for performance analysis.
The default value is DMU_MAX_DELETEBLKCNT which is the same
as upstream. Reducing this value means that smaller files
will be unlinked asynchronously like large files.
- All occurrences of zfsvfs changes to zsb.
Ported-by: KernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Since it's set to arc_c_max / 2, it must be set after arc_c_max is set.
Also added protection against it falling below 2 * maxblocksize in
userland builds.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4268
Adjusting arc_c directly is racy because it can happen in the context
of multiple threads. It should always be >= 2 * maxblocksize. Set it
to a known valid value rather than adjusting it directly.
In addition refactor arc_shrink() to a simpler structure, protect against
underflow in the calculation of the new arc_c value.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reverts: 935434efCloses: #3904Closes: #4161
4950 files sometimes can't be removed from a full filesystem
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/4950https://github.com/illumos/illumos-gate/commit/4bb7380
Porting notes:
- ZoL currently does not log discards to zvols, so the portion of
this patch that modifies the discard logging to mark it as
freeing space has been discarded.
2. may_delete_now had been removed from zfs_remove() in ZoL.
It has been reintroduced.
3. We do not try to emulate vnodes, so the following lines are
not valid on Linux:
mutex_enter(&vp->v_lock);
may_delete_now = vp->v_count == 1 && !vn_has_cached_data(vp);
mutex_exit(&vp->v_lock);
This has been replaced with:
mutex_enter(&zp->z_lock);
may_delete_now = atomic_read(&ip->i_count) == 1 && !(zp->z_is_mapped);
mutex_exit(&zp->z_lock);
Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Check if the lock is held while holding the z_hold_locks() lock.
This prevents a possible use-after-free bug for callers which are
not holding the lock. There currently are no such callers so this
can't cause a problem today but it has been fixed regardless.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4244
Issue #4124
The registered xattr .list handler was simplified in the 4.5 kernel
to only perform a permission check. Given a dentry for the file it
must return a boolean indicating if the name is visible. This
differs slightly from the previous APIs which also required the
function to copy the name in to the provided list and return its
size. That is now all the responsibility of the caller.
This should be straight forward change to make to ZoL since we've
always required the caller to make the copy. However, this was
slightly complicated by the need to support 3 older APIs. Yes,
between 2.6.32 and 4.5 there are 4 versions of this interface!
Therefore, while the functional change in this patch is small it
includes significant cleanup to make the code understandable and
maintainable. These changes include:
- Improved configure checks for .list, .get, and .set interfaces.
- Interfaces checked from newest to oldest.
- Strict checking for each possible known interface.
- Configure fails when no known interface is available.
- HAVE_*_XATTR_LIST renamed HAVE_XATTR_LIST_* for consistency
with similar iops and fops configure checks.
- POSIX_ACL_XATTR_{DEFAULT|ACCESS} were removed forcing callers to
move to their replacements, XATTR_NAME_POSIX_ACL_{DEFAULT|ACCESS}.
Compatibility wrapper were added for old kernels.
- ZPL_XATTR_LIST_WRAPPER added which behaves the same as the existing
ZPL_XATTR_{GET|SET} WRAPPERs. Only the inode is guaranteed to be
a valid pointer, passing NULL for the 'list' and 'name' variables
is allowed and must be checked for. All .list functions were
updated to use the wrapper to aid readability.
- zpl_xattr_filldir() updated to use the .list function for its
permission check which is consistent with the updated Linux 4.5
interface. If a .list function is registered it should return 0
to indicate a name should be skipped, if there is no registered
function the name will be added.
- Additional documentation from xattr(7) describing the correct
behavior for each namespace was added before the relevant handlers.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
The follow_link() interface was retired in favor of get_link().
In the process of phasing in get_link() the Linux kernel went
through two different versions. The first of which depended
on put_link() and the final version on a delayed done function.
- Improved configure checks for .follow_link, .get_link, .put_link.
- Interfaces checked from newest to oldest.
- Strict checking for each possible known interface.
- Configure fails when no known interface is available.
- Both versions .get_link are detected and supported as well
two previous versions of .follow_link.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Issue #4228
5045 use atomic_{inc,dec}_* instead of atomic_add_*
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5045https://github.com/illumos/illumos-gate/commit/1a5e258
Porting notes:
- All changes to non-ZFS files dropped.
- Changes to zfs_vfsops.c dropped because they were Illumos specific.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4220
4039 zfs_rename()/zfs_link() needs stronger test for XDEV
Reviewed by: Gordon Ross <gordon.ross@nexenta.com>
Reviewed by: Kevin Crowe <kevin.crowe@nexenta.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://www.illumos.org/issues/4039https://github.com/illumos/illumos-gate/commit/18e6497
Porting notes:
- This check was updated in Linux in a similar fashion early on in
the port. Therefore, this patch just reorders the function and
updates the comment so it flows the same way as the upstream code.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4218
3557 dumpvp_size is not updated correctly when a dump zvol's size is changed
3558 setting the volsize on a dump device does not return back ENOSPC
3559 setting a volsize larger than the space available sometimes succeeds
3560 dumpadm should be able to remove a dump device
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Approved by: Albert Lee <trisk@nexenta.com>
References:
https://www.illumos.org/issues/3559https://github.com/illumos/illumos-gate/commit/c61ea56
Porting notes:
- Internal zvol.c changes not applied due to implementation differences.
The external interface and behavior was already consistent with the
latest upstream code.
- Retired 2.6.28 HAVE_CHECK_DISK_SIZE_CHANGE configure check. All
supported kernels (2.6.32 and newer) provide this interface.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4217
When replacing an xattr would cause overflowing in SA, we would fallback
to xattr dir. However, current implementation don't clear the one in SA,
so we would end up with duplicated SA.
For example, running the following script on an xattr=sa filesystem
would cause duplicated "user.1".
-- dup_xattr.sh begin --
randbase64()
{
dd if=/dev/urandom bs=1 count=$1 2>/dev/null | openssl enc -a -A
}
file=$1
touch $file
setfattr -h -n user.1 -v `randbase64 5000` $file
setfattr -h -n user.2 -v `randbase64 20000` $file
setfattr -h -n user.3 -v `randbase64 20000` $file
setfattr -h -n user.1 -v `randbase64 20000` $file
getfattr -m. -d $file
-- dup_xattr.sh end --
Also, when a filesystem is switch from xattr=sa to xattr=on, it will
never modify those in SA. This would cause strange behavior like, you
cannot delete an xattr, or setxattr would cause duplicate and the result
would not match when you getxattr.
For example, the following shell sequence.
-- shell begin --
$ sudo zfs set xattr=sa pp/fs0
$ touch zzz
$ setfattr -n user.test -v asdf zzz
$ sudo zfs set xattr=on pp/fs0
$ setfattr -x user.test zzz
setfattr: zzz: No such attribute
$ getfattr -d zzz
user.test="asdf"
$ setfattr -n user.test -v zxcv zzz
$ getfattr -d zzz
user.test="asdf"
user.test="asdf"
-- shell end --
We fix this behavior, by first finding where the xattr resides before
setxattr. Then, after we successfully updated the xattr in one location,
we will clear the other location. Note that, because update and clear
are not in single tx, we could still end up with duplicated xattr. But
by doing setxattr again, it can be fixed.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3472Closes#4153
The fast write mutex is intended to protect accounting, but it is
redundant because all accounting is performed through atomic operations.
It also serializes all metaslab IO behind a mutex, which introduces a
theoretical scaling regression that the Illumos developers did not like
when we showed this to them. Removing it makes the selection of the
metaslab_group lock free as it is on Illumos. The selection is not quite
the same without the lock because the loop races with IO completions,
but any imbalances caused by this are likely to be corrected by
subsequent metaslab group selections.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3643
The zfs_znode_hold_enter() / zfs_znode_hold_exit() functions are used to
serialize access to a znode and its SA buffer while the object is being
created or destroyed. This kind of locking would normally reside in the
znode itself but in this case that's impossible because the znode and SA
buffer may not yet exist. Therefore the locking is handled externally
with an array of mutexs and AVLs trees which contain per-object locks.
In zfs_znode_hold_enter() a per-object lock is created as needed, inserted
in to the correct AVL tree and finally the per-object lock is held. In
zfs_znode_hold_exit() the process is reversed. The per-object lock is
released, removed from the AVL tree and destroyed if there are no waiters.
This scheme has two important properties:
1) No memory allocations are performed while holding one of the z_hold_locks.
This ensures evict(), which can be called from direct memory reclaim, will
never block waiting on a z_hold_locks which just happens to have hashed
to the same index.
2) All locks used to serialize access to an object are per-object and never
shared. This minimizes lock contention without creating a large number
of dedicated locks.
On the downside it does require znode_lock_t structures to be frequently
allocated and freed. However, because these are backed by a kmem cache
and very short lived this cost is minimal.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4106
Add a zfs_object_mutex_size module option to facilitate resizing the
the per-dataset znode mutex array. Increasing this value may help
make the deadlock described in #4106 less common, but this is not a
proper fix. This patch is primarily to aid debugging and analysis.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #4106
Under RHEL6/CentOS6 the default stack size must be increased to 32K
to prevent overflowing the stack when running ztest. This isn't an
issue for other distributions due to either the version of pthreads
or perhaps the compiler. Doubling the stack size resolves the
issue safely for all distribution and leaves us some headroom.
$ sudo -E ztest -V -T 300 -f /var/tmp/
5 vdevs, 7 datasets, 23 threads, 300 seconds...
loading space map for vdev 0 of 1, metaslab 0 of 30 ...
...
loading space map for vdev 0 of 1, metaslab 14 of 30 ...
child died with signal 11
Exited ztest with error 3
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4215
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3749https://github.com/illumos/illumos-gate/commit/3cb69f7
Porting notes:
- [include/sys/spa_impl.h]
- ffe9d38 Add generic errata infrastructure
- 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
- 2668527 Add linux events
- 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
- Updated spa_config_sync() to match illumos with the exception
of a Linux specific block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5438 zfs_blkptr_verify should continue after zfs_panic_recover
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5438https://github.com/illumos/illumos-gate/commit/5897eb4
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
6171 dsl_prop_unregister() slows down dataset eviction.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/6171https://github.com/illumos/illumos-gate/commit/03bad06
Porting notes:
- Conflicts
- 3558fd7 Prototype/structure update for Linux
- 2cf7f52 Linux compat 2.6.39: mount_nodev()
- 13fe019 Illumos #3464
- 241b541 Illumos 5959 - clean up per-dataset feature count code
- dsl_prop_unregister() preserved until out of tree consumers
like Lustre can transition to dsl_prop_unregister_all().
- Fixing 'space or tab at end of line' in include/sys/dsl_dataset.h
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
6288 dmu_buf_will_dirty could be faster
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Justin Gibbs <gibbs@scsiguy.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/6288https://github.com/illumos/illumos-gate/commit/0f2e7d0
Porting notes:
- [module/zfs/dbuf.c]
- Fix 'warning: ISO C90 forbids mixed declarations and code'
by moving 'dbuf_dirty_record_t *dr' to start of code block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
6292 exporting a pool while an async destroy is running can leave
entries in the deferred tree
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Fabian Keil <fk@fabiankeil.de>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
References:
https://www.illumos.org/issues/6292https://github.com/illumos/illumos-gate/commit/a443cc8
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix build failure accidentally introduced by 1715493. This only
results in a failure when debugging is disabled.
dsl_dataset.c: In function 'dsl_dataset_stats':
dsl_dataset.c:1698:45: error: 'dp' undeclared (first use in this function)
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
4929 want prevsnap property
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: Matt Amdur <matt.amdur@delphix.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Boris Protopopov <bprotopopov@hotmail.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/4929https://github.com/illumos/illumos-gate/commit/b461c74
Porting notes:
- [include/sys/fs/zfs.h]
- f67d70 Create an 'overlay' property
- 11b9ec Add full SELinux support
- [fs/zfs/dsl_dataset.c]
- This increases the stack size of dsl_dataset_stats() but
nothing has been changed until this is shown to be an issue.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3749 zfs event processing should work on R/O root filesystems
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3749https://github.com/illumos/illumos-gate/commit/3cb69f7
Porting notes:
- [include/sys/spa_impl.h]
- ffe9d38 Add generic errata infrastructure
- 1421c89 Add visibility in to arc_read
- [include/sys/fm/fs/zfs.h]
- 2668527 Add linux events
- 6283f55 Support custom build directories and move includes
- [module/zfs/spa_config.c]
- Updated spa_config_sync() to match illumos with the exception
of a Linux specific block.
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fix an off by one error introduced by fcff0f3 which triggers an
assertion when 16M blocks are used with send/recv. This fix was
intentionally not folder in to the Illumos commit so it can be
easily cherry-picked by upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When casesensitivity=insensitive is set for the
file system, we can deadlock in a rename if the user uses different case
for each path. For example rename("A/some-file.txt", "a/some-file.txt").
The simple test for this is:
1. mkdir some-dir in a ZFS file system
2. touch some-dir/some-file.txt
3. mv Some-dir/some-file.txt some-dir/some-other-file.txt
This last request deadlocks trying to relock the i_mutex on the inode for
the parent directory.
The solution is to use d_add_ci in zpl_lookup if we are on a file system
that has the casesensitivity=insensitive attribute set.
This patch checks if we are working on a case insensitive file system and if
so, allocates storage for the case insensitive name and passes it to
zfs_lookup and then calls d_add_ci instead of d_splice_alias.
The performance impact seems to be minimal even though we have introduced a
kmalloc and kfree in the lookup path.
The problem was found when running Microsoft's FSCT against Samba on top of
ZFS On Linux.
Signed-off-by: Richard Sharpe <realrichardsharpe@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4136
3139 zdb dies when it tries to determine path of unlinked file
Reviewed by: Matt Ahrens <matthew.ahrens@delphix.com>
Reviewed by: Christopher Siden <chris.siden@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Dan McDonald <danmcd@nexenta.com>
References:
https://github.com/illumos/illumos-gate/commit/1ce39b5https://www.illumos.org/issues/3139
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The function sa_update() accepts a 32-bit length parameter and
assigns it to a 16-bit field in sa_bulk_attr_t, potentially
truncating the passed-in value. This could lead to corrupt system
attribute (SA) records getting written to the pool. Add a VERIFY to
sa_update() to detect cases where overflow would occur. The SA length
is limited to 16-bit values by the on-disk format defined by
sa_hdr_phys_t.
The function zfs_sa_set_xattr() is vulnerable to this bug if the
unpacked nvlist of xattrs is less than 64k in size but the packed
size is greater than 64k. Fix this by appropriately checking the
size of the packed nvlist before calling sa_update(). Add error
handling to zpl_xattr_set_sa() to keep the cached list of SA-based
xattrs consistent with the data on disk.
Lastly, zfs_sa_set_xattr() calls dmu_tx_abort() on an assigned
transaction if sa_update() returns an error, but the DMU only allows
unassigned transactions to be aborted. Wrap the sa_update() call in a
VERIFY0, remove the transaction abort, and call dmu_tx_commit()
unconditionally. This is consistent practice with other callers
of sa_update().
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4150
We need truncate and remove be in the same tx when doing zfs_rmnode on xattr
dir. Otherwise, if we truncate and crash, we'll end up with inconsistent zap
object on the delete queue. We do this by skipping dmu_free_long_range and let
zfs_znode_delete to do the work.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4114
Issue #4052
Issue #4006
Issue #3018
Issue #2861
During zfs_rmnode on a xattr dir, if the system crash just after
dmu_free_long_range, we would get empty xattr dir in delete queue. This would
cause blkid=0 be passed into zap_get_leaf_byblk when doing zfs_purgedir during
mount, and would try to do rw_enter on a wrong structure and cause system
lockup.
We fix this by returning ENOENT when blkid is zero in zap_get_leaf_byblk.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4114Closes#4052Closes#4006Closes#3018Closes#2861
There exists a lock inversion between the z_xattr_lock and the
z_teardown_lock. Resolve this by taking the z_teardown_lock in
all registered xattr callbacks prior to taking the z_xattr_lock.
This ensures the locks are always taken is the same order thus
preventing a deadlock. Note the z_teardown_lock is taken again
in zfs_lookup() and this is safe because the z_teardown lock is
a re-entrant read reader/writer lock.
* process-1
zpl_xattr_get -> Takes zp->z_xattr_lock
__zpl_xattr_get
zfs_lookup -> Takes zsb->z_teardown_lock in ZFS_ENTER macro
* process-2
zfs_ioc_recv -> Takes zsb->z_teardown_lock in zfs_suspend_fs()
zfs_resume_fs
zfs_rezget -> Takes zp->z_xattr_lock
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#3943Closes#3969Closes#4121
Commit efc412b updated spa_config_write() for Linux 4.2 kernels to
truncate and overwrite rather than rename the cache file. This is
the correct fix but it should have only been applied for the kernel
build. In user space rename(2) is needed because ztest depends on
the cache file.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4129
When running a kernel with CONFIG_LOCKDEP=y, lockdep reports possible
recursive locking in some cases and possible circular locking dependency
in others, within the SPL and ZFS modules.
This patch uses a mutex type defined in SPL, MUTEX_NOLOCKDEP, to mark
such mutexes when they are initialized. This mutex type causes
attempts to take or release those locks to be wrapped in lockdep_off()
and lockdep_on() calls to silence the dependency checker and allow the
use of lock_stats to examine contention.
For RW locks, it uses an analogous lock type, RW_NOLOCKDEP.
The goal is that these locks are ultimately changed back to type
MUTEX_DEFAULT or RW_DEFAULT, after the locks are annotated to reflect
their relationship (e.g. z_name_lock below) or any real problem with the
lock dependencies are fixed.
Some of the affected locks are:
tc_open_lock:
=============
This is an array of locks, all with same name, which txg_quiesce must
take all of in order to move txg to next state. All default to the same
lockdep class, and so to lockdep appears recursive.
zp->z_name_lock:
================
In zfs_rmdir,
dzp = znode for the directory (input to zfs_dirent_lock)
zp = znode for the entry being removed (output of zfs_dirent_lock)
zfs_rmdir()->zfs_dirent_lock() takes z_name_lock in dzp
zfs_rmdir() takes z_name_lock in zp
Since both dzp and zp are type znode_t, the locks have the same default
class, and lockdep considers it a possible recursive lock attempt.
l->l_rwlock:
============
zap_expand_leaf() sometimes creates two new zap leaf structures, via
these call paths:
zap_deref_leaf()->zap_get_leaf_byblk()->zap_leaf_open()
zap_expand_leaf()->zap_create_leaf()->zap_expand_leaf()->zap_create_leaf()
Because both zap_leaf_open() and zap_create_leaf() initialize
l->l_rwlock in their (separate) leaf structures, the lockdep class is
the same, and the linux kernel believes these might both be the same
lock, and emits a possible recursive lock warning.
Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3895
Adds zio_taskq_batch_pct as an exported module parameter,
allowing users to modify it at module load time.
Signed-off-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4110
Update the bounds checking for zfs_vdev_aggregation_limit so that
it has a floor of zero and a maximum value of the supported block
size for the pool.
Additionally add an early return when zfs_vdev_aggregation_limit
equals zero to disable aggregation. For very fast solid state or
memory devices it may be more expensive to perform the aggregation
than to issue the IO immediately.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This deadlock may manifest itself in slightly different ways but
at the core it is caused by a memory allocation blocking on file-
system reclaim in the zio pipeline. This is normally impossible
because zio_execute() disables filesystem reclaim by setting
PF_FSTRANS on the thread. However, kmem cache allocations may
still indirectly block on file system reclaim while holding the
critical vq->vq_lock as shown below.
To resolve this issue zio_buf_alloc_flags() is introduced which
allocation flags to be passed. This can then be used in
vdev_queue_aggregate() with KM_NOSLEEP when allocating the
aggregate IO buffer. Since aggregating the IO is purely a
performance optimization we want this to either succeed or fail
quickly. Trying too hard to allocate this memory under the
vq->vq_lock can negatively impact performance and result in
this deadlock.
* z_wr_iss
zio_vdev_io_start
vdev_queue_io -> Takes vq->vq_lock
vdev_queue_io_to_issue
vdev_queue_aggregate
zio_buf_alloc -> Waiting on spl_kmem_cache process
* z_wr_int
zio_vdev_io_done
vdev_queue_io_done
mutex_lock -> Waiting on vq->vq_lock held by z_wr_iss
* txg_sync
spa_sync
dsl_pool_sync
zio_wait -> Waiting on zio being handled by z_wr_int
* spl_kmem_cache
spl_cache_grow_work
kv_alloc
spl_vmalloc
...
evict
zpl_evict_inode
zfs_inactive
dmu_tx_wait
txg_wait_open -> Waiting on txg_sync
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3808Closes#3867
There exists a lock inversion between the z_xattr_lock and the
z_teardown_lock. Detect this case and return EBUSY so zfs_resume_fs()
will mark the inode stale and it can be safely revalidated on next
access.
* process-1
zpl_xattr_get -> Takes zp->z_xattr_lock
__zpl_xattr_get
zfs_lookup -> Takes zsb->z_teardown_lock in ZFS_ENTER macro
* process-2
zfs_ioc_recv -> Takes zsb->z_teardown_lock in zfs_suspend_fs()
zfs_resume_fs
zfs_rezget -> Takes zp->z_xattr_lock
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3969
Since uio now supports bvec, we can convert bio into uio and reuse
dmu_{read,write}_uio. This way, we can remove some duplicate code.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4078
If a bit were cleared in `bp->blk_birth` such that the txg birth
was now lower than any other txg_birth in the deadlist, then there
will be no entry before this in the tree.
This should be impossible but regardless error handling code has
been added for this case. By default this is left as a fatal case
and the blk_birth is logged. However, setting `zfs_recover=1` will
cause the bp to be placed at the start of the deadlist even though
it contains an invalid blk_birth.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#4086Closes#4089
Commit 5f6d0b6 was originally added to gracefully handle block
pointers with a damaged logical size. However, it incorrectly
assumed that all passed arc_done_func_t could handle a NULL
arc_buf_t.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4069Closes#4080
While exceptionally unlikely to cause a problem the zfs_snapentry_t
hold should be taken before the dispatch to prevent any possibility
of the task being processed before the hold.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
When a concorrent mount finishes just before calling to
zfsctl_snapshot_ismounted, if we return EISDIR, the VFS will return
with EREMOTE. We should instead just return 0, so VFS may retry and
would likely notice the dentry is alreadly mounted. This will be
inline with when usermode helper return EBUSY.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
By changing the zfs_snapshot_lock from a mutex to a rw lock the
zfsctl_lookup_objset() function can be allowed to run concurrently.
This should reduce the latency of fh_to_dentry lookups in ZFS
snapshots which are being accessed over NFS.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
The zfsctl_snapshot_unmount_delay() function must not be called
from zfsctl_lookup_objset() while it is currently holding the
zfs_snapshot_lock. This will result in a deadlock. It is safe
to call zfsctl_snapshot_unmount_delay_impl() directly because the
function already has a reference on the zfs_snapentry_t.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes#3997
There are cases where it's desirable that auto-mounted snapshots
not expire after a fixed duration. They should be unmounted only
when the filesystem they are a snapshot of is unmounted.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
objsetid is not unique across pool, so using it solely as key would cause
panic when automounting two snapshot on different pools with the same
objsetid. We fix this by adding spa pointer as additional key.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3948
Issue #3786
Issue #3887
While stack size will vary by architecture it has historically defaulted to
8K on x86_64 systems. However, as of Linux 3.15 the default thread stack
size was increased to 16K. These kernels are now the default in most non-
enterprise distributions which means we no longer need to assume 8K stacks.
This patch takes advantage of that fact by appropriately reverting stack
conservation changes which were made to ensure stability. Changes which
may have had a negative impact on performance for certain workloads. This
also has the side effect of bringing the code slightly more in line with
upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4059
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
References:
https://www.illumos.org/issues/5959https://github.com/illumos/illumos-gate/commit/ca0cc39
Porting notes:
illumos code doesn't check for feature_get_refcount() returning
ENOTSUP (which means feature is disabled) in zdb. zfsonlinux added
a check in https://github.com/zfsonlinux/zfs/commit/784652c
due to #3468. The check was reintroduced here.
Ported-by: Witaut Bajaryn <vitaut.bayaryn@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3965
Provide a generic interface to prefetch ZAP entries by name. This
functionality is being added for external consumers such as Lustre.
It is based of the existing zap_prefetch_uint64() version which is
used by the deduplication code.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#4061
The xattr_hander->{list,get,set} were changed to take a xattr_handler,
and handler_flags argument was removed and should be accessed by
handler->flags.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
As part of block polling support in Linux 4.4, make_request_fn should
return a cookie value of type blk_qc_t. For now, we make zvol_request
always return BLK_QC_T_NONE until we assess whether and how we want
to support block polling.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4021
On 32 bit, the calculation of zfs_dirty_data_max from phymem will overflow,
causing it to be smaller than zfs_dirty_data_sync, and will cause txg being
delayed while no one write to disk. The end result is horrendous write speed.
On 4G ram 32-bit VM, before this patch, simple dd results in ~7MB/s. Now it
can reach speed on par with 64-bit VM.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3973
On 32 bit system, zio_buf_cache is limit to 1M. Larger than that is all NULL.
So we need to avoid reaping them.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3973
When concurrent threads accessing the snapdir, one will succeed the user
helper mount while others will get EBUSY. However, the original code treats
those EBUSY threads as success and goes on to do zfsctl_snapshot_add, which
causes repeated avl_add and thus panic.
Also, if the snapshot is already mounted somewhere else, a thread accessing
the snapdir will also get EBUSY from user helper mount. And it will cause
strange things as doing follow_down_one will fail and then follow_up will jump
up to the mountpoint of the filesystem and confuse the hell out of VFS.
The patch fix both behavior by returning 0 immediately for the EBUSY threads.
Note, this will have a side effect for the second case where the VFS will
retry several times before returning ELOOP.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4018
Because errors during module load are so rare it went unnoticed that
it was possible that a positive errno was returned. This would result
in the module being loaded, nothing being initialized, and a system
panic shortly thereafter. This is what was causing the hard failures
in the automated testing.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
When decreasing the maximum ARC size preserve the 3/4 default
ratio for the arc_meta_limit. Otherwise, the arc_meta_limit
may be set the same as arc_max.
Signed-off-by: AndCycle <andcycle@andcycle.idv.tw>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#4001
When sa_bulk_lookup() fails, unlock_new_inode() will spit out a WARNING. It
will also recursive deadlock on ZFS_OBJ_HOLD_ENTER in zfs_zinactive().
Since we never call insert_inode_locked in fail path, I_NEW is never set, the
inode is never hashed. So unlock_new_inode() can be safely remove it.
We set z_sa_hdl to NULL in fail path so that iput path will stop at
zfs_inactive() without entering zfs_zinactive(). This way we can avoid the
deadlock and prevent double sa_handle_destroy().
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3899
Currently, vdev_disk_physio_completion will try to wake up an waiter without
first checking the existence. This creates a race window in which complete is
called after dr is freed.
We add dr_wait in dio_request to indicate the existence of waiter. Also,
remove dr_rw since no one is using it, and reorder dr_ref to make the struct
more compact in 64bit.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3917
Issue #3880
Strictly enforce keeping 'arc_c >= arc_c_min'. The ASSERTs are
left in place to catch this in a debug build but logic has been
added to gracefully handle in a production build.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3904
We should never block when holding a spin lock, but zfs_inode_update can
block in the critical section of a spin lock in zfs_inode_update:
zfs_inode_update -> dmu_object_size_from_db -> zrl_add -> mutex_enter
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3858
All users of zv_lock were removed by 37f9dac, but we forgot to remove
it. Lets remove it as clean up.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3858
This reverts commit 5f8e1e8505. It
was determined that this patch introduced the quota regression
described in #3789.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3443
Issue #3789
Commit b39c22b set the READ_SYNC and WRITE_SYNC flags for a bio
based on the ZIO_PRIORITY_* flag passed in. This had the unnoticed
side-effect of making the vdev_disk_io_start() synchronous for
certain I/Os.
This in turn resulted in vdev_disk_io_start() being able to
re-dispatch zio's which would result in a RCU stalls when a disk
was removed from the system. Additionally, this could negatively
impact performance and explains the performance regressions reported
in both #3829 and #3780.
This patch resolves the issue by making the blocking behavior
dependent on a 'wait' flag being passed rather than overloading
the passed bio flags.
Finally, the WRITE_SYNC and READ_SYNC behavior is restricted to
non-rotational devices where there is no benefit to queuing to
aggregate the I/O.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3652
Issue #3780
Issue #3785
Issue #3817
Issue #3821
Issue #3829
Issue #3832
Issue #3870
As described in the comment above arc_reclaim_thread() it's critical
that the reclaim thread be careful about blocking. Just like it must
never wait on a hash lock, it must never wait on a task which can in
turn wait on the CV in arc_get_data_buf(). This will deadlock, see
issue #3822 for full backtraces showing the problem.
To resolve this issue arc_kmem_reap_now() has been updated to use the
asynchronous arc prune function. This means that arc_prune_async()
may now be called while there are still outstanding arc_prune_tasks.
However, this isn't a problem because arc_prune_async() already
keeps a reference count preventing multiple outstanding tasks per
registered consumer. Functionally, this behavior is the same as
the counterpart illumos function dnlc_reduce_cache().
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #3808
Issue #3834
Issue #3822
The zpl_nr_cached_objects() function has been disabled because in the
current code it doesn't provide any critical functionality and it may
result in a deadlock under certain circumstances. However, because
we expect to need these hooks in the future this code has not been
entirely removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3719
Accessing a snapshot via NFS should cause an auto-unmount of that
snapshot to be deferred until such as time as the snapshot is idle.
This is analogous to the zpl_revalidate logic employed by locally
mounted snapshots.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3794
Commit torvalds/linux@4246a0b63b
("block: add a bi_error field to struct bio") dropped the error
argument from bio_endio in favor of newly introduced bio->bi_error.
This also replaces bio->bi_flags value BIO_UPTODATE.
bio_endio was a 3 argument function until Linux 2.6.24, which made it
a 2 argument function, and now the prototype has changed yet again to
a 1 argument function. Support for pre 2.6.24 kernels was already
dropped with 37f9dac592 ("zvol processing should use struct bio")
which assumed the 2 argument version in zvol_request(). Remaining code
to support the 3 argument version is hereby removed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Issue #3799
ZFS incorrectly uses directory-based extended attributes even when
xattr=sa is specified as a dataset property or mount option. Support to
honor temporary mount options including "xattr" was added in commit
0282c4137e. There are two issues with the
mount option handling:
* Libzfs has historically included "xattr" in its list of default mount
options. This overrides the dataset property, so the dataset is always
configured to use directory-based xattrs even when the xattr dataset
property is set to off or sa. Address this by removing "xattr" from
the set of default mount options in libzfs.
* There was no way to enable system attribute-based extended attributes
using temporary mount options. Add the mount options "saxattr" and
"dirxattr" which enable the xattr behavior their names suggest. This
approach has the advantages of mirroring the valid xattr dataset
property values and following existing conventions for mount option
names.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3787
Passing NULL for the mount data should not result in EINVAL. It
should be treated as if an empty string were passed and succeed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3771
37f9dac592 replaced the end-start
calculation with a cached value, but neglected to update it on discard
operations. This can cause us to discard data not requested, causing
data loss on zvols.
Reported-by: Richard Connon <richard.connon@zynstra.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3798
6214 zpools going south
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
References:
https://www.illumos.org/issues/6214http://cr.illumos.org/~webrev/sensille/6214_zpools_going_south/
Porting Notes:
Reintroduce b_compress to the l2arc_buf_hdr_t. In commit b9541d6
the compression flags were moved to the generic b_flags in the
arc_buf_hdr_t. This is a problem because l2arc_compress_buf()
may manipulate the compression flags and this can only be done
safely under the hash lock which is not held. See Illumos 6214
for a detailed analysis of the race.
HDR_GET_COMPRESS() macro was removed from arc_buf_info().
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3757
When adding a zvol to the system prefetch zvol_prefetch_bytes from the
start and end of the volume. Prefetching these regions of the volume is
desirable because they are likely to be accessed immediately by blkid(8),
the kernel scanning for a partition table, or another task which probes
the devices.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3659
zfsonlinux/zfs@e20cd6f7a8 caused us to
lose IO accounting on zvols. When I originally wrote that last year, the
symbols we needed to maintain IO accounting were GPL exported, but
torvalds/linux@394ffa503b provided
suitable symbols for restoring this functionality 4 months later. We
can call them to restore the IO accounting on Linux 3.19 and later as
well as any older kernels where that patch is backported.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3741
Internally ZFS keeps a small log to facilitate debugging. By default
the log is disabled, to enable it set zfs_dbgmsg_enable=1. The contents
of the log can be accessed by reading the /proc/spl/kstat/zfs/dbgmsg file.
Writing 0 to this proc file clears the log.
$ echo 1 >/sys/module/zfs/parameters/zfs_dbgmsg_enable
$ echo 0 >/proc/spl/kstat/zfs/dbgmsg
$ zpool import tank
$ cat /proc/spl/kstat/zfs/dbgmsg
1 0 0x01 -1 0 2492357525542 2525836565501
timestamp message
1441141408 spa=tank async request task=1
1441141408 txg 70 open pool version 5000; software version 5000/5; ...
1441141409 spa=tank async request task=32
1441141409 txg 72 import pool version 5000; software version 5000/5; ...
1441141414 command: lt-zpool import tank
Note the zfs_dbgmsg() and dprintf() functions are both now mapped to
the same log. As mentioned above the kernel debug log can be accessed
though the /proc/spl/kstat/zfs/dbgmsg kstat. For user space consumers
log messages are immediately written to stdout after applying the
ZFS_DEBUG environment variable.
$ ZFS_DEBUG=on ./cmd/ztest/ztest -V
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3728
This patch is based on the previous work done by @andrey-ve and
@yshui. It triggers the automount by using kern_path() to traverse
to the known snapshout mount point. Once the snapshot is mounted
NFS can access the contents of the snapshot.
Allowing NFS clients to access to the .zfs/snapshot directory would
normally mean that a root user on a client mounting an export with
'no_root_squash' would be able to use mkdir/rmdir/mv to manipulate
snapshots on the server. To prevent configuration mistakes a
zfs_admin_snapshot module option was added which disables the
mkdir/rmdir/mv functionally. System administators desiring this
functionally must explicitly enable it.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2797Closes#1655Closes#616
Prevents NFS client from detection of different fileids of snapshot root dentry
before & after snapshot mount.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Linux 2.6.36 introduced REQ_SECURE to indicate when discards *must* be
processed, such that we cannot do optimizations like block alignment.
Consequently, the discard semantics prior to 2.6.36 require us to always
process unaligned discards. Previously, we would do this optimization
regardless. This patch changes things to correctly restrict this
optimization to situations where REQ_SECURE exists, but is not included
in the flags.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Internally, zvols are files exposed through the block device API. This
is intended to reduce overhead when things require block devices.
However, the ZoL zvol code emulates a traditional block device in that
it has a top half and a bottom half. This is an unnecessary source of
overhead that does not exist on any other OpenZFS platform does this.
This patch removes it. Early users of this patch reported double digit
performance gains in IOPS on zvols in the range of 50% to 80%.
Comments in the code suggest that the current implementation was done to
obtain IO merging from Linux's IO elevator. However, the DMU already
does write merging while arc_read() should implicitly merge read IOs
because only 1 thread is permitted to fetch the buffer into ARC. In
addition, commercial ZFSOnLinux distributions report that regular files
are more performant than zvols under the current implementation, and the
main consumers of zvols are VMs and iSCSI targets, which have their own
elevators to merge IOs.
Some minor refactoring allows us to register zfs_request() as our
->make_request() handler in place of the generic_make_request()
function. This eliminates the layer of code that broke IO requests on
zvols into a top half and a bottom half. This has several benefits:
1. No per zvol spinlocks.
2. No redundant IO elevator processing.
3. Interrupts are disabled only when actually necessary.
4. No redispatching of IOs when all taskq threads are busy.
5. Linux's page out routines will properly block.
6. Many autotools checks become obsolete.
An unfortunate consequence of eliminating the layer that
generic_make_request() is that we no longer calls the instrumentation
hooks for block IO accounting. Those hooks are GPL-exported, so we
cannot call them ourselves and consequently, we lose the ability to do
IO monitoring via iostat. Since zvols are internally files mapped as
block devices, this should be okay. Anyone who is willing to accept the
performance penalty for the block IO layer's accounting could use the
loop device in between the zvol and its consumer. Alternatively, perf
and ftrace likely could be used. Also, tools like latencytop will still
work. Tools such as latencytop sometimes provide a better view of
performance bottlenecks than the traditional block IO accounting tools
do.
Lastly, if direct reclaim occurs during spacemap loading and swap is on
a zvol, this code will deadlock. That deadlock could already occur with
sync=always on zvols. Given that swap on zvols is not yet production
ready, this is not a blocker.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Reclaim in the traverse prefetch thread, which is run on the system
taskq, can overrun the stack.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3733
Add the required kernel side infrastructure to parse arbitrary
mount options. This enables us to support temporary mount
options in largely the same way it is handled on other platforms.
See the 'Temporary Mount Point Properties' section of zfs(8)
for complete details.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#985Closes#3351
Commit 49ddb31506 added the
zfs_arc_average_blocksize parameter to allow control over the size of
the arc hash table. The dbuf hash table's size should be determined
similarly.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3721
Allow for easy turning of a pools reserved free space. Previous
versions of ZFS (v0.6.4 and earlier) held 1/64 of the pools capacity
in reserve. Commits 3d45fdd and 0c60cc3 increased this to 1/32.
Setting spa_slop_shift=6 will restore the previous default setting.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3724
The LBA weighting makes sense on rotational media where the outer tracks
have twice the bandwidth of the inner tracks. However, it is detrimental
on nonrotational media such as solid state disks, where the only effect
is to ensure that metaslabs enter the best-fit allocation behavior
sooner, which is detrimental to performance. It also makes no sense on
files where the underlying filesystem can arrange things however it
wants.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3712
Before read locking z_teardown_inactive_lock, we need to check if we have
already had write lock on it. Otherwise, we would deadlock on ourself when
doing rollback:
zfs_ioc_rollback
->zfs_suspend_fs (z_teardown_inactive_lock, RW_WRITER)
->zfs_resume_fs->zfs_rezget->zfs_iput_async->iput-> ...
->zfs_inactive (z_teardown_inactive_lock, RW_READER)
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2869
The misc_deregister() function was changed to a void return type.
Rather than add compatibility code to detect this change simply
ignore the return code on all kernels. It was only used to log
an informational error message of no real value.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Re-factor the .zfs/snapshot auto-mouting code to take in to account
changes made to the upstream kernels. And to lay the groundwork for
enabling access to .zfs snapshots via NFS clients. This patch makes
the following core improvements.
* All actively auto-mounted snapshots are now tracked in two global
trees which are indexed by snapshot name and objset id respectively.
This allows for fast lookups of any auto-mounted snapshot regardless
without needing access to the parent dataset.
* Snapshot entries are added to the tree in zfsctl_snapshot_mount().
However, they are now removed from the tree in the context of the
unmount process. This eliminates the need complicated error logic
in zfsctl_snapshot_unmount() to handle unmount failures.
* References are now taken on the snapshot entries in the tree to
ensure they always remain valid while a task is outstanding.
* The MNT_SHRINKABLE flag is set on the snapshot vfsmount_t right
after the auto-mount succeeds. This allows to kernel to unmount
idle auto-mounted snapshots if needed removing the need for the
zfsctl_unmount_snapshots() function.
* Snapshots in active use will not be automatically unmounted. As
long as at least one dentry is revalidated every zfs_expire_snapshot/2
seconds the auto-unmount expiration timer will be extended.
* Commit torvalds/linux@bafc9b7 caused snapshots auto-mounted by ZFS
to be immediately unmounted when the dentry was revalidated. This
was a consequence of ZFS invaliding all snapdir dentries to ensure that
negative dentries didn't mask new snapshots. This patch modifies the
behavior such that only negative dentries are invalidated. This solves
the issue and may result in a performance improvement.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3589Closes#3344Closes#3295Closes#3257Closes#3243Closes#3030Closes#2841
There's no metadata to write to disk for ctldir inodes. So we check if
a inode belongs to the ctldir in zpl_commit_metadata, and returns
immediately if it is.
Signed-off-by: Andrey Vesnovaty <andrey.vesnovaty@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2797
zvols should not be an entropy source for the kernel. Disable it to be
consistent with the upstream kernel.
torvalds/linux@b277da0a8a
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3713
Add a missing space to the zfs_vdev_sync_write_min_active module
parameter description.
Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3714
As part of the stack reduction effort in
50b25b2187, a zio_t containing a taskq_ent
was added to struct vdev_queue which itself is part of struct vdev.
The taskq entry should be initialized as is currently done in zio_create()
for newly-created bare zio_t object. The rationale is the same as is
described in f467b05a26.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3709
If the ZAP object containing a snapshot map is corrupted due to an
unrecoverable checksum error or otherwise, dsl_dataset_name() will
normally panic the system due to its VERIFY.
This patch attempts to allow a recovery avenue from such situations by
manufacturing a descriptive snapshot name and then ignoring the error.
Scrubbing a pool with this type of corruption will then show the affected
object in the error list rather than panicking.
The recovery code is only enabled when the zfs_recover module parameter
is set.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3705
Since ZoL allows large blocks to be used by volumes, unlike upstream
illumos, the feature flag must be checked prior to volume creation.
This is critical because unlike filesystems, volumes will create a
object which uses large blocks as part of the create. Therefore, it
cannot be safely checked in zfs_check_settable() after the dataset
can been created.
In addition this patch updates the relevant error messages to use
zfs_nicenum() to print the maximum blocksize.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3591
When support for large blocks was added DMU_MAX_ACCESS was increased
to allow for blocks of up to 16M to fit in a transaction handle.
This had the side effect of increasing the max_hw_sectors_kb for
volumes, which are scaled off DMU_MAX_ACCESS, to 64M from 10M.
This is an issue for volumes which by default use an 8K block size
because it results in dmu_buf_hold_array_by_dnode() allocating a
64K array for the dbufs. The solution is to restore the maximum
size to ~10M. This patch specifically changes it to 16M which is
close enough.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3684
Starting from Linux 4.1 allows iov_iter with bio_vec to be passed into
iter_read/iter_write. Notably, the loop device will pass bio_vec to backend
filesystem. However, current ZFS code assumes iovec without any check, so it
will always crash when using loop device.
With the restructured uio_t, we can safely pass bio_vec in uio_t with UIO_BVEC
set. The uio* functions are modified to handle bio_vec case separately.
The const uio_iov causes some warning in xuio related stuff, so explicit
convert them to non const.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3511Closes#3640
The spa_config_write() function relies on the classic method of
making sure updates to the /etc/zfs/zpool.cache file are atomic.
It writes out a temporary version of the file and then uses
vn_rename() to switch it in to place. This way there can never
exist a partial version of the file, it's all or nothing.
Conceptually this is a good strategy and it makes good sense
for platforms where it's easy to do a rename within the kernel.
Unfortunately, Linux is not one of those platforms. Even doing
basic I/O to a file system from within the kernel is strongly
discouraged. In order to support this at all the vn_rename()
implementation ends up being complex and fragile. So fragile
that recent Linux 4.2 changes have broken it.
While it is possible to update vn_rename() to work with the
latest kernels a better long term strategy is to stop using
vn_rename() entirely. Then all this complex, fragile code can
be removed. Achieving this is straight forward because
config_write() is the only consumer of vn_rename().
This patch reworks spa_config_write() to update the cache file
in place. The file will be truncated, written out, and then
synced to disk. If an error is encountered the file will be
unlinked leaving the system in a consistent state.
This does expose a tiny tiny tiny window where a system could
crash at exactly the wrong moment could leave a partially written
cache file. However, this is highly unlikely because the cache
file is 1) infrequently updated, 2) only a few kilobytes in size,
and 3) written with a single vn_rdwr() call.
If this were to somehow happen it poses no risk to pool. Simply
removing the cache file will allow the pool to be imported cleanly.
Going forward this will be even less of an issue as we intend to
disable the use of a cache file by default.
Bottom line not using vn_rename() allows us to make ZoL more
robust against upstream kernel changes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3653
Failing to lookup a name in the spa_ddt_stat_object should not result
in a panic in ddt_object_load(). The error can be safely returned to
the caller for handling resulting in a useful user error message.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3370
Without the parenthesis, this particular ASSERT will evaluate to
"(RW_READER == (!zap->zap_ismicro && fatreader)) ? RW_READER : lti"
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3685
This brings the behavior of arc_memory_throttle() back in sync with
illumos. The updated memory throttling policy roughly goes like this:
* Never throttle if more than 10% of memory is free. This threshold
is configurable with the zfs_arc_lotsfree_percent module option.
* Minimize any throttling of kswapd even when free memory is below
the set threshold. Allow it to write out pages as quickly as
possible to help alleviate the memory pressure.
* Delay all other threads when free memory is below the set threshold
in order to avoid compounding the memory pressure. Buffers will be
evicted from the ARC to reduce the issue.
The Linux specific zfs_arc_memory_throttle_disable module option has
been removed in favor of the existing zfs_arc_lotsfree_percent tuning.
Setting zfs_arc_lotsfree_percent=0 will have the same effect as
zfs_arc_memory_throttle_disable and it was therefore redundant.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3637
While Linux doesn't provide detailed information about the state of
the VM it does provide us total free pages. This information should
be incorporated in to the arc_available_memory() calculation rather
than solely relying on a signal from direct reclaim. Conceptually
this brings arc_available_memory() back in sync with illumos.
It is also desirable that the target amount of free memory be tunable
on a system. While the default values are expected to work well
for most workloads there may be cases where custom values are needed.
The zfs_arc_sys_free module option was added for this purpose.
zfs_arc_sys_free - The target number of bytes the ARC should leave
as free memory on the system. This value can
checked in /proc/spl/kstat/zfs/arcstats and
setting this module option will override the
default value.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3637
The zvol_threads module option should be bounded to a reasonable
range. The taskq must have at least 1 thread and shouldn't have
more than 1,024 at most. The default value of 32 is a reasonable
default.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3614
Commit d958324 fixed the deadlock between page lock and range lock by
unlocking the page lock before acquiring the range lock. However,
this created a new issue #3075.
The problem is that if we can't set the write back bit before releasing
the page lock. Then other processes will be unaware that the page is
under active write back. They may therefore truncate the page,
invalidate the page, or not honor the sync semantics.
To workaround this problem we re-dirty the page before dropping the
page lock. While this doesn't prevent the page from being truncated
it does ensure it won't be invalidated. Then the range lock and the
page lock are reacquired in the correct deadlock-free order.
Once both locks are safely held the page state can be rechecked. If
all is well and the page is in the expect state the dirty bit can be
removed, the write back bit set, and the page removed from the skip
count. If not the page will be handled as appropriate.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3075
Under Linux filesystem threads responsible for handling I/O are
normally created with the maximum priority. Non-I/O filesystem
processes run with the default priority. ZFS should adopt the
same priority scheme under Linux to maintain good performance
and so that it will complete fairly when other Linux filesystems
are active. The priorities have been updated to the following:
$ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta'
- TS 10743 19 -20 [spl_kmem_cache]
- TS 10744 19 -20 [spl_system_task]
- TS 10745 19 -20 [spl_dynamic_tas]
- TS 10764 19 0 [dbu_evict]
- TS 10765 19 0 [arc_prune]
- TS 10766 19 0 [arc_reclaim]
- TS 10767 19 0 [arc_user_evicts]
- TS 10768 19 0 [l2arc_feed]
- TS 10769 39 0 [z_unmount]
- TS 10770 39 -20 [zvol]
- TS 11011 39 -20 [z_null_iss]
- TS 11012 39 -20 [z_null_int]
- TS 11013 39 -20 [z_rd_iss]
- TS 11014 39 -20 [z_rd_int_0]
- TS 11022 38 -19 [z_wr_iss]
- TS 11023 39 -20 [z_wr_iss_h]
- TS 11024 39 -20 [z_wr_int_0]
- TS 11032 39 -20 [z_wr_int_h]
- TS 11033 39 -20 [z_fr_iss_0]
- TS 11041 39 -20 [z_fr_int]
- TS 11042 39 -20 [z_cl_iss]
- TS 11043 39 -20 [z_cl_int]
- TS 11044 39 -20 [z_ioctl_iss]
- TS 11045 39 -20 [z_ioctl_int]
- TS 11046 39 -20 [metaslab_group_]
- TS 11050 19 0 [z_iput]
- TS 11121 38 -19 [z_wr_iss]
Note that under Linux the meaning of a processes priority is inverted
with respect to illumos. High values on Linux indicate a _low_ priority
while high value on illumos indicate a _high_ priority.
In order to preserve the logical meaning of the minclsyspri and
maxclsyspri macros when they are used by the illumos wrapper functions
their values have been inverted. This way when changes are merged
from upstream illumos we won't need to remember to invert the macro.
It could also lead to confusion.
This patch depends on https://github.com/zfsonlinux/spl/pull/466.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3607
A NULL should never be passed as the dnode_t pointer to the function
dmu_free_long_range_impl(). Regardless, because we have a reported
occurrence of this let's add some error handling to catch this.
Better to report a reasonable error to caller than panic the system.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3445
Address minor differences in style between upstream and ZoL. This
patch contains no functional differences and is solely designed to
minimize the delta from upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
Commit d962d5d didn't quite properly resolve the HDR_L2ONLY_SIZE
accounting. Accounting is now performed only in the constructor
and destructor which is a nice simplification. It should have
been removed the from create and destroy functions. This brings
up back in sync with upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
Originally removed because it wasn't required under Linux. However,
there may still be some utility in signaling the arc reclaim thread
under Linux via reclaim. This should already have happened by other
means but it's not harmless and reduces another point of divergence
with upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
Commit f521ce1 removed the minimum value for "arc_p" allowing it to
drop to zero or grow to "arc_c". This was done to improve specific
workload which constantly dirties new "metadata" but also frequently
touches a "small" amount of mfu data (e.g. mkdir's).
This change may still be desirable but it needs to be re-investigated.
in the context of the recent ARC changes from upstream. Therefore
this code is being restored to facilitate benchmarking. By setting
"zfs_arc_p_min_shift=64" we easily compare the performance.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
5817 change type of arcs_size from uint64_t to refcount_t
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/5817https://github.com/illumos/illumos-gate/commit/2fd872a
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
5445 Add more visibility via arcstats; specifically arc_state_t
stats and differentiate between "data" and "metadata"
Reviewed by: Basil Crow <basil.crow@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Bayard Bell <bayard.bell@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5445https://github.com/illumos/illumos-gate/commit/4076b1b
Porting Notes:
This patch is an improved version of cc7f677 which was previously
merged in ZoL. This patch incorporates the additional improvements
which were made upstream.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3533
5376 arc_kmem_reap_now() should not result in clearing arc_no_grow
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5376https://github.com/illumos/illumos-gate/commit/2ec99e3
Porting Notes:
The good news is that many of the recent changes made upstream to the
ARC tackled issues previously observed by ZoL with similar solutions.
The bad news is those solution weren't identical to the ones we applied.
This patch is designed to split the difference and apply as much of the
upstream work as possible.
* The arc_available_memory() function was removed previous in ZoL but
due to the upstream changes it makes sense to add it back. This function
has been customized for Linux so that it can be used to determine a low
memory. This provides the same basic functionality as the illumos version
allowing us to minimize changes through the rest of the code base. The
exact mechanism used to detect a low memory state remains unchanged so
this change isn't a significant as it might first appear.
* This patch includes the long standing fix for arc_shrink() which was
originally proposed in #2167. Since there were related changes to this
function it made sense to include that work.
* The arc_init() function has been re-factored. As before it sets sane
default values for the ARC but then calls arc_tuning_update() to apply
user specific tuning made via module options. The arc_tuning_update()
function is then called periodically by the arc_reclaim_thread() to
apply changes to the tunings made during normal operation.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3616Closes#2167
When an inode is detected with invalid mode bits the safe thing to
do is panic the system. This indicates a problem with the contents
of a dnode and it should never be possible. This is the default
behavior.
Unfortunately, due to flaws in the system attribute (SA) implementation
(on all platforms) it was possible that ZFS could create a damaged dnode.
This was a rare issue which only impacted dnodes which used a spill
block. Normally only symlinks and files with ACLs would require a
spill block. However, if the dataset had the xattr=sa property set
and extended attributes were used this problem could occur.
As of the 0.6.4 tag the root cause of this issue has been fixed. For
pools which are exhibiting this damage the 'zfs_recover=1' module option
may be set. This will cause ZFS to interpret the dnode with invalid
mode bits as a normal file. This may allow the files to be accessed
for recovery purposes.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3548
Build products from an out of tree build should be written
relative to the build directory. Sources should be referred
to by their locations in the source directory.
This is accomplished by adding the 'src' and 'obj' variables
for the module Makefile.am, using relative paths to reference
source files, and by setting VPATH when source files are not
co-located with the Makefile. This enables the following:
$ mkdir build
$ cd build
$ ../configure \
--with-spl=$HOME/src/git/spl/ \
--with-spl-obj=$HOME/src/git/spl/build
$ make -s
This change also has the advantage of resolving the following
warning which is generated by modern versions of automake.
Makefile.am:00: warning: source file 'xxx' is in a subdirectory,
Makefile.am:00: but option 'subdir-objects' is disabled
Signed-off-by: Turbo Fredriksson <turbo@bayour.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#1082
After a successful write the inode must be updated under the range
lock. If it is updated after dropping the lock there exists a race
where the znode and inode wile disagree about the file size. This
could result in narrow window of time where read(2) is able to access
data beyond what fstat(2) reports as the file size.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ned Bass <bass6@llnl.gov>
Closes#3601
As of Linux 4.2 the kernel has completely retired the nameidata
structure. One of the few remaining consumers of this interface
were the follow_link() and put_link() callbacks.
This patch adds the required checks to configure to detect the
interface change and updates the functions accordingly. Migrating
to the simple_follow_link() interface was considered but was decided
against ironically due to the increased complexity.
It also should be noted that the kernel follow_link() and put_link()
interfaces changes several times after 4.1 and but before 4.2. This
means there is a narrow range of kernel commits which never appear
in an official tag of the Linux kernel which ZoL will not build.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3596
Linux 4.2 commit torvalds/linux@dac5621 renamed bio->bi_cnt to
bio->__bi_cnt. Because this value is only used once in a block of
debug code it simplest just to remove the PANIC. To my knowledge
this debugging has never been hit or proved useful so this is no
great loss.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#3596
Many key internal functions pass system return codes that are safe to
return to userland. In the case of ddi_copyin(9F), an error passes -1
and the documentation states very clearly that drivers should pass
EFAULT to userland when this happens.
http://illumos.org/man/9F/ddi_copyin
This does not happen in the ZFS source code. I believe it should be
changed to pass EFAULT. I caught this when writing man pages for the
libzfs_core API.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3575
Translate zio requests with ZIO_PRIORITY_SYNC_READ and
ZIO_PRIORITY_SYNC_WRITE into synchronous bio requests by setting
READ_SYNC and WRITE_SYNC flags. Specifically, WRITE_SYNC flag turns
out to have a pronounced effect when writing to an SSD-based SLOG.
When WRITE_SYNC is not set (WRITE is set instead), the block trace
for a SLOG device looks as follows:
...
130,96 0 3 0.008968390 0 C W 830464 + 136 [0]
130,96 0 4 0.011999161 0 C W 830720 + 136 [0]
130,96 0 5 0.023955549 0 C W 831744 + 136 [0]
130,96 0 6 0.024337663 19775 A W 832000 + 136 <- (130,97) 829952
130,96 0 7 0.024338823 19775 Q W 832000 + 136 [z_wr_iss/6]
130,96 0 8 0.024340523 19775 G W 832000 + 136 [z_wr_iss/6]
130,96 0 9 0.024343187 19775 P N [z_wr_iss/6]
130,96 0 10 0.024344120 19775 I W 832000 + 136 [z_wr_iss/6]
130,96 0 11 0.026784405 0 UT N [swapper] 1
130,96 0 12 0.026805339 202 U N [kblockd/0] 1
130,96 0 13 0.026807199 202 D W 832000 + 136 [kblockd/0]
130,96 0 14 0.026966948 0 C W 832000 + 136 [0]
130,96 3 1 0.000449358 19788 A W 829952 + 136 <- (130,97) 827904
130,96 3 2 0.000450951 19788 Q W 829952 + 136 [z_wr_iss/19]
130,96 3 3 0.000453212 19788 G W 829952 + 136 [z_wr_iss/19]
130,96 3 4 0.000455956 19788 P N [z_wr_iss/19]
130,96 3 5 0.000457076 19788 I W 829952 + 136 [z_wr_iss/19]
130,96 3 6 0.002786349 0 UT N [swapper] 1
...
Here the 130,197 is the partition created on the log device when adding it
to the pool, whereas the base device is 130,96. As one can see, the writes
to the SLOG are not marked synchronous (the S is missing next to W), and
the queue unplugs occur based on the timer (UT event) resulting in slightly
over 2 msec latency of writes. This results in a sub-par performance of
single stream synchronous writes (limited by latency of the SLOG).
When the WRITE_SYNC is set, a similar trace looks as follows:
...
130,96 4 1 0.000000000 70714 A WS 4280576 + 136 <- (130,97) 4278528
130,96 4 2 0.000000832 70714 Q WS 4280576 + 136 [(null)]
130,96 4 3 0.000002109 70714 G WS 4280576 + 136 [(null)]
130,96 4 4 0.000003394 70714 P N [(null)]
130,96 4 5 0.000003846 70714 I WS 4280576 + 136 [(null)]
130,96 4 6 0.000004854 70714 D WS 4280576 + 136 [(null)]
130,96 5 1 0.000354487 70713 A WS 4280832 + 136 <- (130,97) 4278784
130,96 5 2 0.000355072 70713 Q WS 4280832 + 136 [(null)]
130,96 5 3 0.000356383 70713 G WS 4280832 + 136 [(null)]
130,96 5 4 0.000357635 70713 P N [(null)]
130,96 5 5 0.000358088 70713 I WS 4280832 + 136 [(null)]
130,96 5 6 0.000359191 70713 D WS 4280832 + 136 [(null)]
130,96 0 76 0.000159539 0 C WS 4280576 + 136 [0]
130,96 16 85 0.000742108 70718 A WS 4281088 + 136 <- (130,97) 4279040
130,96 16 86 0.000743197 70718 Q WS 4281088 + 136 [z_wr_iss/15]
130,96 16 87 0.000744450 70718 G WS 4281088 + 136 [z_wr_iss/15]
130,96 16 88 0.000745817 70718 P N [z_wr_iss/15]
130,96 16 89 0.000746705 70718 I WS 4281088 + 136 [z_wr_iss/15]
130,96 16 90 0.000747848 70718 D WS 4281088 + 136 [z_wr_iss/15]
130,96 0 77 0.000604063 0 C WS 4280832 + 136 [0]
130,96 0 78 0.000899858 0 C WS 4281088 + 136 [0]
As one can see, all the writes are synchronous (WS), and I/O completions
(e.g. from issue I to completion C) take 160-250 usec, or about 10x faster.
Since WRITE_SYNC or READ_SYNC flags are among several factors that are
considered when processing bio requests, it seems prudent to mark all the
zio requests of synchronous priority with the READ/WRITE_SYNC flags to make
them eligible for consideration as such by the Linux block I/O layer.
Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3529
As of gcc version 5.1.1 a new warning has been added to detect the
use of a boolean in a switch statement (-Wswitch-bool). Resolve the
warning by explicitly casting the value to an integer type.
zfs-0.6.4/module/zfs/zvol.c: In function 'zvol_request':
error: switch condition has boolean value [-Werror=switch-bool]
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5661 ZFS: "compression = on" should use lz4 if feature is enabled
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Reviewed by: Xin LI <delphij@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://github.com/illumos/illumos-gate/commit/db1741fhttps://www.illumos.org/issues/5661
Ported-by: kernelOfTruth kerneloftruth@gmail.com
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3571
Reclaim during metaslab preloading can cause deadlocks involving znode
z_lock and ARC buffer header ht_lock.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3532.
5008 lock contention (rrw_exit) while running a read only load
Reviewed by: Matthew Ahrens <matthew.ahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Richard Yao <ryao@gentoo.org>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Porting notes:
This patch ported perfectly cleanly to ZoL. During testing 100% cached
small-block reads, extreme contention was noticed on rrl->rr_lock from
rrw_exit() due to the frequent entering and leaving ZPL. Illumos picked
up this patch from FreeBSD and it also helps under Linux.
On a 1-minute 4K cached read test with 10 fio processes pinned to a single
socket on a 4-socket (10 thread per socket) NUMA system, contentions on
rrl->rr_lock were reduced from 508799 to 43085.
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3555
5946 zfs_ioc_space_snaps must check that firstsnap and lastsnap refer to snapshots
5945 zfs_ioc_send_space must ensure that fromsnap refers to a snapshot
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gordon.ross@nexenta.com>
References:
https://www.illumos.org/issues/5946https://www.illumos.org/issues/5945https://github.com/illumos/illumos-gate/commit/24218be
Ported-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3552
5909 ensure that shared snap names don't become too long after promotion
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5909https://github.com/illumos/illumos-gate/commit/cb5842f
Ported-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3550
5912 full stream can not be force-received into a dataset if it has a snapshot
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5912https://github.com/illumos/illumos-gate/commit/5bae108
Ported-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3549
5175 implement dmu_read_uio_dbuf() to improve cached read performance
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5175https://github.com/illumos/illumos-gate/commit/f8554bb
Porting notes:
This patch doesn't include the changes for the COMSTAR (Common
Multiprotocol SCSI Target) - since it's not available for ZoL.
http://thegreyblog.blogspot.co.at/2010/02/setting-up-solaris-comstar-and.html
Ported by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3392
5368 ARC should cache more metadata
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5368https://github.com/illumos/illumos-gate/commit/3a5286a
Porting Notes:
The vast majority of this patch was already merged in the context
of the 06358ea changes. This is just a small hunk which was missed.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
5163 arc should reap range_seg_cache
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5163https://github.com/illumos/illumos-gate/commit/83803b5
Porting Notes:
Added umem_cache_reap_now() wrapped to suppress unused variable
warning for user space build in arc_kmem_reap_now().
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Over the years the default values for the taskqs used on Linux have
differed slightly from illumos. In the vast majority of cases this
was done to avoid creating an obnoxious number of idle threads which
would pollute the process listing.
With the addition of support for dynamic taskqs all multi-threaded
queues should be created as dynamic taskqs. This allows us to get
the best of both worlds.
* The illumos default values for the I/O pipeline can be restored.
These values are known to work well for most workloads. The only
exception is the zio write interrupt taskq which is changed to
ZTI_P(12, 8). At least under Linux more threads has been shown
to improve performance, see commit 7e55f4e.
* Reduces the number of idle threads on the system when it's not
under heavy load. The maximum number of threads will only be
created when they are required.
* Remove the vdev_file_taskq and rely on the system_taskq instead
which is now dynamic and may have up to 64-threads. Again this
brings us back inline with upstream.
* Tasks dispatched with taskq_dispatch_ent() are allowed to use
dynamic taskqs. The Linux taskq implementation supports this.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3507
If we don't account for that, then we might end up overwriting disk
area of buffers that have not been evicted yet, because l2arc_evict
operates in terms of disk addresses.
The discrepancy between the write size calculation and the actual
increment to l2ad_hand was introduced in commit 3a17a7a9.
The change that introduced l2ad_hand alignment was almost correct
as the write size was accumulated as a sum of rounded buffer sizes.
See commit illumos/illumos-gate@e14bb32.
Also, we now consistently use asize / a_sz for the allocated size and
psize / p_sz for the physical size. The latter accounts for a
possible size reduction because of the compression, whereas the
former accounts for a possible subsequent size expansion because of
the alignment requirements.
The code still assumes that either underlying storage subsystems or
hardware is able to do read-modify-write when an L2ARC buffer size is
not a multiple of a disk's block size. This is true for 4KB sector disks
that provide 512B sector emulation, but may not be true in general.
In other words, we currently do not have any code to make sure that
an L2ARC buffer, whether compressed or not, which is used for physical
I/O has a suitable size.
Note that currently the cache device utilization is calculated based
on the physical size, not the allocated size. The same applies to
l2_asize kstat. That is wrong, but this commit does not fix that.
The accounting problem was introduced partially in commit 3a17a7a9
and partially in 3038a2b (accounting became consistent but in favour
of the wrong size).
Porting Notes:
Reworked to be C90 compatible and the 'write_psize' variable was
removed because it is now unused.
References:
https://reviews.csiden.org/r/229/https://reviews.freebsd.org/D2764
Ported-by: kernelOfTruth <kerneloftruth@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3400Closes#3433Closes#3451
Unit testing at ClusterHQ found that passing an invalid file handle to
zfs_ioc_hold results in a NULL pointer dereference on a system without
assertions:
IP: [<ffffffffa0218aa0>] zfsdev_getminor+0x10/0x20 [zfs]
Call Trace:
[<ffffffffa021b4b0>] zfs_onexit_fd_hold+0x20/0x40 [zfs]
[<ffffffffa0214043>] zfs_ioc_hold+0x93/0xd0 [zfs]
[<ffffffffa0215890>] zfsdev_ioctl+0x200/0x500 [zfs]
An assertion would have caught this had they been enabled, but this is
something that the kernel module should handle without failing. We
resolve this by searching the linked list to ensure that the file
handle's private_data points to a valid zfsdev_state_t.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3506
This seems generally useful. metaslab_aliquot is the ZFS allocation
granularity, which is roughly equivalent to what is called the stripe
size in traditional RAID arrays. It seems relevant to performance
tuning.
Signed-off-by: Etienne Dechamps <etienne@edechamps.fr>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
The metaslab allocator device selection algorithm contains a bias
mechanism whose goal is to achieve roughly equal disk space usage across
all top-level vdevs.
It seems that the initial rationale for this code was to allow newly
added (empty) vdevs to "come up to speed" faster in an attempt to make
the pool quickly converge to a steady state where all vdevs are equally
utilized.
While the code seems to work reasonably well for this use case, there
is another scenario in which this algorithm fails miserably: the case
where top-level vdevs don't have the same sizes (capacities). ZFS
allows this, and it is a good feature to have, so that users who simply
want to build a pool with the disks they happen to have lying around can
do so even if the disks have heteregenous sizes.
Here's a script that simulates a pool with two vdevs, with one 4X larger
than the other:
dd if=/dev/zero of=/tmp/d1 bs=1 count=1 seek=134217728
dd if=/dev/zero of=/tmp/d2 bs=1 count=1 seek=536870912
zpool create testspace /tmp/d1 /tmp/d2
dd if=/dev/zero of=/testspace/foobar bs=1M count=256
zpool iostat -v testspace
Before this commit, the script would output the following:
capacity
pool alloc free
---------- ----- -----
testspace 252M 375M
/tmp/d1 104M 18.5M
/tmp/d2 148M 356M
---------- ----- -----
This demonstrates that the current code handles this situation very
poorly: d1 shows 85% usage despite the pool itself being only 40% full.
d1 is quite saturated at this point, and is slowing down the entire pool
due to saturation, fragmentation and the like.
In contrast, here's the result with the code in this commit:
capacity
pool alloc free
---------- ----- -----
testspace 252M 375M
/tmp/d1 56.7M 66.3M
/tmp/d2 195M 309M
---------- ----- ------
This looks much better. d1 is 46% used, which is close to the overall
pool utilization (40%). The code still doesn't result in perfectly
balanced allocation, probably because of the way mg_bias is applied
which does not guarantee perfect accuracy, but this is still much better
than before.
Signed-off-by: Etienne Dechamps <etienne@edechamps.fr>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3389
For kernels which do not implement a per-suberblock shrinker,
those older than Linux 3.1, the shrink_dcache_parent() function
was used to attempt to reclaim dentries. This was found not be
entirely reliable and could lead to performance issues on older
kernels running meta-data heavy workloads.
To address this issue a zfs_sb_prune_aliases() function has been
added to implement this functionality. It relies on traversing
the list of znodes for a filesystem and adding them to a private
list with a reference held. The private list can then be safely
walked outside the z_znodes_lock to prune dentires and drop the
last reference so the inode can be freed.
This provides the same synchronous behavior as the per-filesystem
shrinker and has the advantage of depending on only long standing
interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3501
The number of threads in the iput taskq has been increased to speed
up the number of iputs which can be handled. This has been observed
to improve the meta data reclaim regardless of zfs_sb_prune()
implementation in use.
The taskq has also been renamed z_iput to for consistency with the
rest of the I/O pipeline taskqs which are all named z_*.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Linux 3.15 commit torvalds/linux@293bc98 introduced two new methods.
The ->read_iter() and ->write_iter() methods were designed to replace
the ->aio_read() and ->aio_write() interfaces. Both interfaces were
preserved for several kernel releases in order to migrate all existing
consumers to the new interfaces. But as of Linux 4.1 the legacy
interface has been retired and the ZFS code must be updated to use
the new interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3352
Kernels >= 3.12 have a NUMA-aware superblock shrinker which is used in
ZoL by zfs_sb_prune(). This patch calls the shrinker for each on-line
NUMA node in order that memory be freed for each one.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3495
The Linux kernel watchdog will automatically dump a backtrace for
any process while sleeps for over 120s in an uninterruptible state.
The solution is for the prefetch thread to sleep in an interruptible
state. The way the existing code was written this is safe because
when woken it will always reevaluate its conditional. As a general
rule it is preferable to sleep in an interruptible when possible.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3450Closes#3402
This is the counterpart to zfsonlinux/spl@2345368 which replaces the
cv_wait_interruptible() function with cv_wait_sig(). There is no
functional change to patch merely brings the function names in to
sync to maximize portability.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3450
Issue #3402
ZoL had lowered the minimum ARC size to 4MiB to better accommodate tiny
systems such as the raspberry pi, however, as of addition of large block
support, the arc_adapt() function depends on arc_c being >= 32MiB (2 *
SPA_MAXBLOCKSIZE).
This patch raises the minimum ARC size to 32MiB and adds a VERIFY test
to arc_adapt() for future-proofing.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
As described in the comment above arc_adapt_thread() it is critical
that the arc_adapt_thread() function never sleep while holding a hash
lock. This behavior was possible in the Linux implementation because
the arc_prune() logic was implemented to be synchronous. Under
illumos the analogous dnlc_reduce_cache() function is asynchronous.
To address this the arc_do_user_prune() function is has been reworked
in to two new functions as follows:
* arc_prune_async() is an asynchronous implementation which dispatches
the prune callback to be run by the system taskq. This makes it
suitable to use in the context of the arc_adapt_thread().
* arc_prune() is a synchronous implementation which depends on the
arc_prune_async() implementation but blocks until the outstanding
callbacks complete. This is used in arc_kmem_reap_now() where it
is safe, and expected, that memory will be freed.
This patch additionally adds the zfs_arc_meta_strategy module option
while allows the meta reclaim strategy to be configured. It defaults
to a balanced strategy which has been proved to work well under Linux
but the illumos meta-only strategy can be enabled.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Replace taskq_wait() with taskq_wait_oustanding(). This way callers
will only block until previously submitted tasks have been completed.
This was the previous behavior of task_wait() prior to the introduction
of taskq_wait_outstanding() so this isn't really a functionalty change
for these callers.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Porting notes and other significant code changes:
The illumos 5368 patch (ARC should cache more metadata), which
was never picked up by ZoL, is mostly reverted by this patch.
Since ZoL relies on the kernel asynchronously calling the shrinker to
actually reap memory, the shrinker wakes up arc_reclaim_waiters_cv every
time it runs.
The arc_adapt_thread() function no longer calls arc_do_user_evicts()
since the newly-added arc_user_evicts_thread() calls it periodically.
Notable conflicting ZoL commits which conflicted with this patch or
whose effects are either duplicated or un-done by this patch:
302f753 - Integrate ARC more tightly with Linux
39e055c - Adjust arc_p based on "bytes" in arc_shrink
f521ce1 - Allow "arc_p" to drop to zero or grow to "arc_c"
77765b5 - Remove "arc_meta_used" from arc_adjust calculation
94520ca - Prune metadata from ghost lists in arc_adjust_meta
Trace support for multilist_insert() and multilist_remove() has been
added and produces the following output:
fio-12498 [077] .... 112936.448324: zfs_multilist__insert: ml { offset 240 numsublists 80 sublistidx 63 }
fio-12498 [077] .... 112936.448347: zfs_multilist__remove: ml { offset 240 numsublists 80 sublistidx 29 }
The following arcstats have been removed:
recycle_miss - Used by arcstat.py and arc_summary.py, both of which
have been updated appropriately.
l2_writes_hdr_miss
The following arcstats have been added:
evict_not_enough - Number of times arc_evict_state() was unable to
evict enough buffers to reach its target amount.
evict_l2_skip - Number of times arc_evict_hdr() skipped eviction
because it was being written to the l2arc.
l2_writes_lock_retry - Replaces l2_writes_hdr_miss. Number of times
l2arc_write_done() failed to acquire hash_lock (and re-tries).
arc_meta_min - Shows the value of the zfs_arc_meta_min module
parameter (see below).
The "index" column of the "dbuf" kstat has been removed since it doesn't
have a direct analog in the new multilist scheme. Additional multilist-
related stats could be added in the future but would likely require
extensions to the mulilist API.
The following module parameters have been added:
zfs_arc_evict_batch_limit - Number of ARC headers to free per sub-list
before moving on to the next sub-list.
zfs_arc_meta_min - Enforce a floor on the amount of metadata in
the ARC.
zfs_arc_num_sublists_per_state - Number of multilist sub-lists per
ARC state.
zfs_arc_overflow_shift - Controls amount by which the ARC must exceed
the target size to be considered "overflowing".
Ported-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov
5408 managing ZFS cache devices requires lots of RAM
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Don Brady <dev.fs.zfs@gmail.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Porting notes:
Due to the restructuring of the ARC-related structures, this
patch conflicts with at least the following existing ZoL commits:
6e1d7276c9
Fix inaccurate arcstat_l2_hdr_size calculations
The ARC_SPACE_HDRS constant no longer exists and has been
somewhat equivalently replaced by HDR_L2ONLY_SIZE.
e0b0ca983d
Add visibility in to cached dbufs
The new layering of l{1,2}arc_buf_hdr_t within the arc_buf_hdr
struct requires additional structure member names to be used
when referencing the inner items. Also, the presence of L1 or L2
inner member is indicated by flags using the new HDR_HAS_L{1,2}HDR
macros.
Ported by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5369 arc flags should be an enum
5370 consistent arc_buf_hdr_t naming scheme
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Porting notes:
ZoL has moved some ARC definitions into arc_impl.h.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported by: Tim Chase <tim@chase2k.com>
This reverts only the l2arc_hdr part of commit
ecf3d9b8e6 in preparation for the illumos
5497 "lock contention on arcs_mtx" patch which does the same thing
but uses the newer two-level ARC structure following the Illumos 5408
"managing ZFS cache devices requires lots of RAM" patch.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Illumos 5497 "lock contention on arcs_mtx" reworks eviction and obviates
the need for this.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit 037763e44e in
preparation for the illumos 5497 "lock contention on arcs_mtx" patch
which includes a fix for this very problem.
ZoL had picked up a subset of the illumos 5497 patch to deal with the
l2arc compression buffer leak.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
This reverts commit 16fcdea363 in preparation
for the illumos 5497 "lock contention on arcs_mtx" patch which eliminates
"marker" within the ARC code.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Commit c3520e7 restructured vdev_add_child() in such a way that
the spa variable was unused during non-debug builds. This is
consistent with the upstream illumos code but because ZoL, unlike
illumos, is built with all compiler warnings enabled this causes
a legitimate warning. Revert this hunk of the patch to keep the
build clean.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3432
5818 zfs {ref}compressratio is incorrect with 4k sector size
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Albert Lee <trisk@omniti.com>
References:
https://www.illumos.org/issues/5818https://github.com/illumos/illumos-gate/commit/81cd5c5
Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3432
5269 zpool import slow
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5269https://github.com/illumos/illumos-gate/commit/12380e1e
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3396
The function dmu_objset_userquota_get_ids() checks and uses dn->dn_bonus
outside of dn_struct_rwlock. If the dnode is being freed then the bonus
dbuf may be in the process of getting evicted. In this case there is a
race that may cause dmu_objset_userquota_get_ids() to access the dbuf
after it has been destroyed. To prevent this, ensure that when we are
using the bonus dbuf we are either holding a reference on it or have
taken dn_struct_rwlock.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3443
- Don't check db->bb_blkid, but use the blkid argument instead.
Checking db->db_blkid may be unsafe since we doesn't yet have a
hold on the dbuf so its validity is unknown.
- Call mutex_exit() on found_db, not db, since it's not certain that
they point to the same dbuf, and the mutex was taken on found_db.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3443
5243 zdb -b could be much faster
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5243https://github.com/illumos/illumos-gate/commit/f7950bf
Ported-by: Don Brady <don.brady@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3414
There seems to be a annoying problem using NFSv4 to access ZFS
file systems under certain circumstances. It's easily reproduced:
nfs_client1: mount server:/export /mnt
nfs_client1: cd /mnt
nfs_client1: echo foo >junk
nfs_client1: cat junk
foo
Now on a different NFSv4 client:
nfs_client2: mount server:/export /mnt
nfs_client2: cd /mnt
nfs_client2: vi junk
# Make some changes to /mnt/junk and save
# This change the inode associated with /mnt/junk
Now back to the original client:
nfs_client1: cat junk
cat: junk: No such file or directory
Admittedly NFSv4 is not advertised as a cluster file system that
maintains a completely coherent view of data across multiple nodes.
But it does have some mechanisms built in that try to deal with
situations like the above. Namely, it employs specialized file
handle lookup routines that return ESTALE when a file handle contains
a non-existant inode value. The ESTALE return triggers a return
full file path lookup from the client to determine if the file has
actually gone away or if the cached file handle is no longer valid.
ZFS behavior can be brought into line with other file systems
(e.g., ext4) by applying the following patch:
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3224
Per the documentation for dnode_next_offset in dnode.c, the "txg"
parameter specifies a lower bound on which transaction the dnode can
be found in. We are interested in all dnodes that are removed between
the first and last transaction in the snapshot. It doesn't need to be
created in that snapshot to correspond to a removed file.
In fact, the behavior of zfs diff in the test case exactly matches
this: the transaction that created the data that was deleted in snapshot
"2" was produced before, in snapshot "1", definitely predating the first
transaction in snapshot "2".
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <Tim Chase <tim@onlight.com>
Closes#2081
When ASSERTs are compiled out by using the --disable-debug configure
option. Then the local variable 'dsl_pool_t *dp' will be unused and
generate a compiler warning. Since this variable is only used once
in the ASSERT replace it with 'ds->ds_dir->dd_pool'.
This has the additional advantage of potentially saving a few bytes
on the stack depending on how gcc decides to compile the function.
This issue was not noticed immediately because the automated builders
use --enable-debug to make the testing as rigorous as possible.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlap <cdunlap@llnl.gov>
Closes#3410
5765 add support for estimating send stream size with lzc_send_space when source is a bookmark
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Albert Lee <trisk@nexenta.com>
References:
https://www.illumos.org/issues/5765https://github.com/illumos/illumos-gate/commit/643da460
Porting notes:
* Unused variable 'recordsize' in dmu_send_estimate() dropped
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3397
5810 zdb should print details of bpobj
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5810https://github.com/illumos/illumos-gate/commit/732885fc
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3387
5351 scrub goes for an extra second each txg
5352 scrub should pause when there is some dirty data
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5351https://github.com/illumos/illumos-gate/commit/6f6a76a
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3383
Author: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5350https://github.com/illumos/illumos-gate/commit/e651831
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3382
Author: Alex Reece <alex@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5422https://github.com/illumos/illumos-gate/commit/a846f19
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3381
The security and ACL operations should all be performed atomically.
To accomplish this there would need to significant invasive changes
made to the common code base. For the moment it's desirable for
compatibility reasons to avoid this. Therefore the code has been
updated to attempt to unwind the operation in case of failure
rather than panic.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2445
5027 zfs large block support
Reviewed by: Alek Pinchuk <pinchuk.alek@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Saso Kiselkov <skiselkov.ml@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5027https://github.com/illumos/illumos-gate/commit/b515258
Porting Notes:
* Included in this patch is a tiny ISP2() cleanup in zio_init() from
Illumos 5255.
* Unlike the upstream Illumos commit this patch does not impose an
arbitrary 128K block size limit on volumes. Volumes, like filesystems,
are limited by the zfs_max_recordsize=1M module option.
* By default the maximum record size is limited to 1M by the module
option zfs_max_recordsize. This value may be safely increased up to
16M which is the largest block size supported by the on-disk format.
At the moment, 1M blocks clearly offer a significant performance
improvement but the benefits of going beyond this for the majority
of workloads are less clear.
* The illumos version of this patch increased DMU_MAX_ACCESS to 32M.
This was determined not to be large enough when using 16M blocks
because the zfs_make_xattrdir() function will fail (EFBIG) when
assigning a TX. This was immediately observed under Linux because
all newly created files must have a security xattr created and
that was failing. Therefore, we've set DMU_MAX_ACCESS to 64M.
* On 32-bit platforms a hard limit of 1M is set for blocks due
to the limited virtual address space. We should be able to relax
this one the ABD patches are merged.
Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#354
The metaslab_min_alloc_size option is no longer used in the code.
This functionality was removed by commit f3a7f66 and the module
options should have been dropped at that time.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
With debugging enabled and depending on your kernel config, the size of
arc_buf_hdr_t can blow out the stack of arc_evict() and arc_evict_ghost()
to greater than 1024 bytes. Let's avoid this.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3377
5349 verify that block pointer is plausible before reading
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Xin Li <delphij@FreeBSD.org>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5349https://github.com/illumos/illumos-gate/commit/f63ab3d5
Porting notes:
* Several variable declarations were moved due to C style needs
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3373
By the time we're tearing down our superblock the VFS has started releasing
all our inodes/znodes. Some of this work may have been handed off to our
iput taskq so we need to wait for that work to complete. However the iput
from the taskq can itself result in additional work being added to the
taskq:
dsl_pool_iput_taskq
iput
iput_final
evict
destroy_inode
zpl_inode_destroy
zfs_inode_destroy
zfs_iput_async(ZTOI(zp->z_xattr_parent))
taskq_dispatch(dsl_pool_iput_taskq..., iput, ...)
Let's wait until all our znodes have been released.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3281
5348 zio_checksum_error() only fills in info if ECKSUM
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5348https://github.com/illumos/illumos-gate/commit/373dc1cf
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3372
5808 spa_check_logs is not necessary on readonly pools
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5808https://github.com/illumos/illumos-gate/commit/23367a2f
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3369
5814 bpobj_iterate_impl(): Close a refcount leak iterating on a sublist.
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Simon Klinkert <simon.klinkert@gmail.com>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5814https://github.com/illumos/illumos-gate/commit/b67dde11
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3368
4951 ZFS administrative commands should use reserved space, not with ENOSPC
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/4373https://github.com/illumos/illumos-gate/commit/7d46dc6
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
3654 zdb should print number of ganged blocks
3656 remove unused function zap_cursor_move_to_key()
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/3654https://www.illumos.org/issues/3656https://github.com/illumos/illumos-gate/commit/d5ee8a1
Porting Notes:
3655 and 3657 were part of this commit but those hunks were dropped
since they apply to mdb.
Ported by: Brian Behlendorf <behlendorf1@llnl.gov>
It's been reported that threads would loop infinitely inside zfs_zget. The
speculated cause for this is that if an inode is marked for evict, zfs_zget
would see that and loop. However, if the looping thread doesn't yield, the
inode may not have a chance to finish evict, thus causing a infinite loop.
This patch solve this issue by add cond_resched to zfs_zget, making the
looping thread to yield when needed.
Tested-by: jlavoy <jalavoy@gmail.com>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3349
5244 zio pipeline callers should explicitly invoke next stage
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Alex Reece <alex.reece@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Steven Hartland <killing@multiplay.co.uk>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5244https://github.com/illumos/illumos-gate/commit/738f37b
Porting Notes:
1. The unported "2932 support crash dumps to raidz, etc. pools"
caused a merge conflict due to a copyright difference in
module/zfs/vdev_raidz.c.
2. The unported "4128 disks in zpools never go away when pulled"
and additional Linux-specific changes caused merge conflicts in
module/zfs/vdev_disk.c.
Ported-by: Richard Yao <richard.yao@clusterhq.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2828
5812 assertion failed in zrl_tryenter(): zr_owner==NULL
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Gordon Ross <gwr@nexenta.com>
References:
https://www.illumos.org/issues/5812https://github.com/illumos/illumos-gate/commit/8df1730
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3357
5592 NULL pointer dereference in dsl_prop_notify_all_cb()
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5592https://github.com/illumos/illumos-gate/commit/9d47dec
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5531 NULL pointer dereference in dsl_prop_get_ds()
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5531https://github.com/illumos/illumos-gate/commit/e57a022
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5056 ZFS deadlock on db_mtx and dn_holds
Author: Justin Gibbs <justing@spectralogic.com>
Reviewed by: Will Andrews <willa@spectralogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5056https://github.com/illumos/illumos-gate/commit/bc9014e
Porting Notes:
sa_handle_get_from_db():
- the original patch includes an otherwise unmentioned fix for a
possible usage of an uninitialised variable
dmu_objset_open_impl():
- Under Illumos list_link_init() is the same as filling a list_node_t
with NULLs, so they don't notice if they miss doing list_link_init()
on a zero'd containing structure (e.g. allocated with kmem_zalloc as
here). Under Linux, not so much: an uninitialised list_node_t goes
"Boom!" some time later when it's used or destroyed.
dmu_objset_evict_dbufs():
- reduce stack usage using kmem_alloc()
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
5095 panic when adding a duplicate dbuf to dn_dbufs
Author: Alex Reece <alex@delphix.com>
Reviewed by: Adam Leventhal <adam.leventhal@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Mattew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Josef Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5095https://github.com/illumos/illumos-gate/commit/86bb58a
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
4873 zvol unmap calls can take a very long time for larger datasets
Author: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Basil Crow <basil.crow@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/4873https://github.com/illumos/illumos-gate/commit/0f6d88a
Porting Notes:
dbuf_free_range():
- reduce stack usage using kmem_alloc()
- the sorted AVL tree will handle the spill block case correctly
without all the special handling in the for() loop
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3897 zfs filesystem and snapshot limits (fix leak)
Author: Alex Reece <alex.reece@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3897https://github.com/illumos/illumos-gate/commit/fb7001f
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
3897 zfs filesystem and snapshot limits
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Christopher Siden <christopher.siden@delphix.com>
References:
https://www.illumos.org/issues/3897https://github.com/illumos/illumos-gate/commit/a2afb61
Porting Notes:
dsl_dataset_snapshot_check(): reduce stack usage using kmem_alloc().
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
In traverse_visitbp(), the input argument dnp is modified in the middle to
point to a temporary buffer. Originally this doesn't matter, because no user
of TRAVERSE_POST dereferences it. However, in fbeddd6 a piece of code is added
dereferencing dnp after the modification, creating a possible bug.
We fix this by creating a new local variable cdnp for the DMU_OT_DNODE case,
so we don't modify the input argument. Also we introduce different local
variables in the DMU_OT_OBJSET case to prevent confusion between the input
argument.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2060
This isn't required for the Linux port because the kernel tracks
if a module is busy. The prototype for spa_busy() is also removed
since its definition was already removed.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3262
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Will Andrews <willa@SpectraLogic.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5313https://github.com/illumos/illumos-gate/commit/fe319232
Ported-by: DHE <git@dehacked.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3280
The function spa_add_feature_stats() manipulates the shared nvlist
spa->spa_feat_stats in an unsafe concurrent manner. Add a mutex to
protect the list.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3335
The following panic would occur under certain heavy load:
[ 4692.202686] Kernel panic - not syncing: thread ffff8800c4f5dd60 terminating with rrw lock ffff8800da1b9c40 held
[ 4692.228053] CPU: 1 PID: 6250 Comm: mmap_deadlock Tainted: P OE 3.18.10 #7
The culprit is that ZFS_EXIT(zsb) would call tsd_exit() every time, which
would purge all tsd data for the thread. However, ZFS_ENTER is designed to be
reentrant, so we cannot allow ZFS_EXIT to blindly purge tsd data.
Instead, we rely on the new behavior of tsd_set. When NULL is passed as the
new value to tsd_set, it will automatically remove the tsd entry specified the
the key for the current thread.
rrw_tsd_key and zfs_allow_log_key already calls tsd_set(key, NULL) when
they're done. The zfs_fsyncer_key relied on ZFS_EXIT(zsb) to call tsd_exit() to
do clean up. Now we explicitly call tsd_set(key, NULL) on them.
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3247
Additional testing has shown that the region covered by PF_FSTRANS
needs to be extended to cover the zpl_xattr_security_init() and
init_acl() functions. The zpl_mark_dirty() function can also recurse
and therefore must always be protected.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Closes#3331
Prevent deadlocks by disabling direct reclaim during all NFS, xattr,
ctldir, and super function calls. This is related to 40d06e3.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Issue #3225
The Linux slab, in general, performs better than the SPl slab in cases
where a lot of objects are allocated and fragmentation is likely present.
This patch fixes pathologically bad behavior in cases where the ARC is
filled with mostly metadata and a user program needs to allocate and
dirty enough memory which would require an insignificant amount of the
ARC to be reclaimed.
If zfs_znode_cache is on the SPL slab, the system may spin for a very
long time trying to reclaim sufficient memory. If it is on the Linux
slab, the behavior has been observed to be much more predictible; the
memory is reclaimed more efficiently.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3283
The packed nvlist allocated in spa_config_write() may exceed the
warning threshold for large configurations. Use the vmem interfaces
for this short lived allocation.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3251
Prevent deadlocks by disabling direct reclaim during all ZPL and ioctl
calls as well as the l2arc and adapt ARC threads.
This obviates the need for MUTEX_FSTRANS so its previous uses and
definition have been eliminated.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3225
5693 ztest fails in dbuf_verify: buf[i] == 0, due to dedup and bp_override
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5693https://github.com/illumos/illumos-gate/commit/7f7ace3
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3231
5694 traverse_prefetcher does not prefetch enough
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Garrett D'Amore <garrett@damore.org>
References:
https://www.illumos.org/issues/5694https://github.com/illumos/illumos-gate/commit/34d7ce05
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3230
Align code in traverse_visitbp() with that in Illumos in preparation for
applying Illumos-5694.
No functional change: use a temporary variable pd to replace multiple
occurrences of td->td_pfd. This increases our stack use slightly more
then normal because the function is called recursively.
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #3230
5695 dmu_sync'ed holes do not retain birth time
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Bayard Bell <buffer.g.overflow@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com>
References:
https://www.illumos.org/issues/5695https://github.com/illumos/illumos-gate/commit/70163ac
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3229
When called to free a spill block from a dnode, dbuf_free_range() has a
bug that results in all dbufs for the dnode getting freed. A variety of
problems may result from this bug, but a common one was a zap lookup
tripping an ASSERT because the zap buffers had been zeroed out. This
could happen on a dataset with xattr=sa set when extended attributes are
written and removed on a directory concurrently with I/O to files in
that directory.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes#3195Fixes#3204Fixes#3222
ZoL had been setting max_sectors to UINT_MAX, but until Linux 3.19, it
the kernel artifically capped it at 1024 (BLK_DEF_MAX_SECTORS).
This cap was removed in torvalds/linux@34b48db. This patch changes
it to DMU_MAX_ACCESS (in sectors) and also changes the ASSERT in
dmu_tx_hold_write() to allow the maximum transfer size.
Signed-off-by: Tim Chase <tim@chase2k.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3212
The zio_inject.c keeps zio_injection_enabled as a counter of
fault handlers, so it should not be exported to user space as
a module option.
Several EXPORT_SYMBOLs are moved from zio.c to zio_inject.c,
where the symbols are defined.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3199
zfs_sb_t has grown to the point where using kmem_zalloc() for allocations
is triggering the 32k warning threshold.
We can't safely convert this entire allocation to use vmem_alloc() instead
of kmem_alloc() because the backing_dev_info structure is embedded here.
It depends on the bit_waitqueue() function which won't behave properly
when given a virtual address.
Instead, use vmem_alloc() to allocate the z_hold_mtx array separately.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes#3178
The goal of this function is to evict enough meta data buffers from the
ARC in order to enforce the arc_meta_limit. Achieving this is slightly
more complicated than it appears because it is common for data buffers
to have holds on meta data buffers. In addition, dnode meta data buffers
will be held by the dnodes in the block preventing them from being freed.
This means we can't simply traverse the ARC and expect to always find
enough unheld meta data buffer to release.
Therefore, this function has been updated to make alternating passes
over the ARC releasing data buffers and then newly unheld meta data
buffers. This ensures forward progress is maintained and arc_meta_used
will decrease. Normally this is sufficient, but if required the ARC
will call the registered prune callbacks causing dentry and inodes to
be dropped from the VFS cache. This will make dnode meta data buffers
available for reclaim. The number of total restarts in limited by
zfs_arc_meta_adjust_restarts to prevent spinning in the rare case
where all meta data is pinned.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Issue #3160
Originally when the ARC prune callback was introduced the idea was
to register a single callback for the ZPL. The ARC could invoke this
call back if it needed the ZPL to drop dentries, inodes, or other
cache objects which might be pinning buffers in the ARC. The ZPL
would iterate over all ZFS super blocks and perform the reclaim.
For the most part this design has worked well but due to limitations
in 2.6.35 and earlier kernels there were some problems. This patch
is designed to address those issues.
1) iterate_supers_type() is not provided by all kernels which makes
it impossible to safely iterate over all zpl_fs_type filesystems in
a single callback. The most straight forward and portable way to
resolve this is to register a callback per-filesystem during mount.
The arc_*_prune_callback() functions have always supported multiple
callbacks so this is functionally a very small change.
2) Commit 050d22b removed the non-portable shrink_dcache_memory()
and shrink_icache_memory() functions and didn't replace them with
equivalent functionality. This meant that for Linux 3.1 and older
kernels the ARC had no mechanism to drop dentries and inodes from
the caches if needed. This patch adds that missing functionality
by calling shrink_dcache_parent() to release dentries which may be
pinning inodes. This will result in all unused cache entries being
dropped which is a bit heavy handed but it's the only interface
available for old kernels.
3) A zpl_drop_inode() callback is registered for kernels older than
2.6.35 which do not support the .evict_inode callback. This ensures
that when the last reference on an inode is dropped it is immediately
removed from the cache. If this isn't done than inode can end up on
the global unused LRU with no mechanism available to ZFS to drop them.
Since the ARC buffers are not dropped the hottest inodes can still
be recreated without performing disk IO.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Issue #3160
The arc_meta_max value should be increased when space it consumed not when
it is returned. This ensure's that arc_meta_max is always up to date.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Pavel Snajdr <snajpa@snajpa.net>
Issue #3160
5630 stale bonus buffer in recycled dnode_t leads to data corruption
Author: Justin T. Gibbs <justing@spectralogic.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5630https://github.com/illumos/illumos-gate/commit/cd485b4
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3172
5047 don't use atomic_*_nv if you discard the return value
Author: Josef 'Jeff' Sipek <josef.sipek@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: Jason King <jason.brian.king@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
References:
https://www.illumos.org/issues/5047https://github.com/illumos/illumos-gate/commit/640c167
Porting Notes:
Several hunks from the original patch where not specific to ZFS
and thus were dropped.
Ported-by: Chris Dunlop <chris@onthe.net.au>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <ryao@gentoo.org>
Issue #3172
Allowing direct reclaim to re-enter the VFS in the zfs_inactive()
call path has historically been problematic for ZoL. Therefore,
in order to avoid an entire class of current and future issues
caused by this PF_FSTRANS is set for all zfs_inactive() callers.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3163
Avoid issuing I/O to the pool when retrieving feature flags information.
Trying to read the ZAPs from disk means that zpool clear would hang if
the pool is suspended and recovery would require a reboot. To keep the
feature stats resident in memory, we hang a cached nvlist off of the
spa. It is built up from disk the first time spa_add_feature_stats() is
called, and refreshed thereafter using the cached feature reference
counts. spa_add_feature_stats() gets called at pool import time so we
can be sure the cached nvlist will be available if the pool is later
suspended.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3082
There are a handful of ASSERT(!"...")'s throughout the code base for
cases which should be impossible. This patch converts them to use
cmn_err(CE_PANIC, ...) to ensure they are always enabled and so that
additional debugging is logged if they were to occur.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1445
The 'capabilities' argument which was passed to bdi_setup_and_register()
has been removed. File systems should no longer pass BDI_CAP_MAP_COPY.
For our purposes this means there are now three different interfaces
which must be handled. A zpl_bdi_setup_and_register() wrapper function
has been introduced to provide a single interface to the ZPL code.
* 2.6.32 - 2.6.33, bdi_setup_and_register() is not exported.
* 2.6.34 - 3.19, bdi_setup_and_register() takes 3 arguments.
* 4.0 - x.y, bdi_setup_and_register() takes 2 arguments.
I've also taken this opportunity to remove HAVE_BDI because kernels
older then 2.6.32 are no longer supported. All kernels newer than
this will have one of the above interfaces.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes#3128
There are regions in the ZFS code where it is desirable to be able
to be set PF_FSTRANS while a specific mutex is held. The ZFS code
could be updated to set/clear this flag in all the correct places,
but this is undesirable for a few reasons.
1) It would require changes to a significant amount of the ZFS
code. This would complicate applying patches from upstream.
2) It would be easy to accidentally miss a critical region in
the initial patch or to have an future change introduce a
new one.
Both of these concerns can be addressed by using a new mutex type
which is responsible for managing PF_FSTRANS, support for which was
added to the SPL in commit zfsonlinux/spl@9099312 - Merge branch
'kmem-rework'.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tim Chase <tim@chase2k.com>
Closes#3050Closes#3055Closes#3062Closes#3132Closes#3142Closes#2983
Pool reference count is NOT checked in spa_export_common()
if the pool has been imported readonly=on, i.e. spa->spa_sync_on
is FALSE. Then zpool export and zfs list may deadlock:
1. Pool A is imported readonly.
2. zpool export A and zfs list are run concurrently.
3. zfs command gets reference on the spa, which holds a dbuf on
on the MOS meta dnode.
4. zpool command grabs spa_namespace_lock, and tries to evict dbufs
of the MOS meta dnode. The dbuf held by zfs command can't be
evicted as its reference count is not 0.
5. zpool command blocks in dnode_special_close() waiting for the
MOS meta dnode reference count to drop to 0, with
spa_namespace_lock held.
6. zfs command tries to get the spa_namespace_lock with a reference
on the spa held, which holds a dbuf on the MOS meta dnode.
7. Now zpool command and zfs command deadlock each other.
Also any further zfs/zpool command will block on spa_namespace_lock
forever.
The fix is to always check pool reference count in spa_export_common(),
no matter whether the pool was imported readonly or not.
Signed-off-by: Isaac Huang <he.huang@intel.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2034
Cleanly destroying or exporting a pool requires that the pool
not be suspended. Therefore, set the POOL_CHECK_SUSPENDED flag
for these ioctls so the utilities will output a descriptive
error message rather than block.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #2878
In the original implementation of the SPL wrappers were provided
for module initialization and cleanup. This was done to abstract
away any compatibility code which might be needed for the SPL.
As it turned out the only significant compatibility issue was that
the default pwd during module load differed under Illumos and Linux.
Since this is such as minor thing and the wrappers complicate the
code they are being retired.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2985
As described in flags section of open(2):
O_APPEND:
The file is opened in append mode. Before each write(2), the
file offset is positioned at the end of the file, as if with
lseek(2). O_APPEND may lead to corrupted files on NFS filesys-
tems if more than one process appends data to a file at once.
This is because NFS does not support appending to a file, so the
client kernel has to simulate it, which can't be done without a
race condition.
This issue was originally overlooked because normally the generic
VFS code handles this for a filesystem. However, because ZFS explictly
registers a zpl_write() function it's responsible for the seek.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3124
When loading the ZFS kernel modules they should not populate the
spa namespace using the cache file. This behavior isn't consistent
with other Linux kernel modules and we need to move away from it.
Removing this makes the whole startup process predictable with four
basic steps which are driven by the init system.
1) modprobe
2) zpool import
3) zfs mount
4) zfs share
This change also helps lay the groundwork for eventually removing
the kobj_* compatibility code on the kernel side. It may need to
be preserved in userspace because libzfs_init() depends on it.
This is why the conditional must be wrapped with an #ifdef _KERNEL.
Signed-off-by: Dan Swartzendruber <dswartz@druber.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#2820
