Commit Graph

187 Commits

Author SHA1 Message Date
Christopher Siden
9ae529ec5d Illumos #2619 and #2747
2619 asynchronous destruction of ZFS file systems
2747 SPA versioning with zfs feature flags
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  illumos/illumos-gate@53089ab7c8
  illumos/illumos-gate@ad135b5d64
  illumos changeset: 13700:2889e2596bd6
  https://www.illumos.org/issues/2619
  https://www.illumos.org/issues/2747

NOTE: The grub specific changes were not ported.  This change
must be made to the Linux grub packages.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
2013-01-08 10:35:35 -08:00
Will Rouesnel
462ee8e3f3 Allow fake mounts to succeed on non-legacy filesystems.
mountall in Debian depends on being able to pass the -f parameter to
mount, which specifies a fake mount and just updates the mtab. Currently
mount.zfs will fail such a request if it is not passed with -o zfsutil.

This patch allows a fake mount on a non-legacy filesystem to succeed in
the same manner as a -o remount does, thus enabling mountall to work
correctly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1167
2013-01-07 11:30:27 -08:00
Ned Bass
2957f38d78 vdev_id support for device link aliases
Add a vdev_id feature to map device names based on already defined
udev device links.  To increase the odds that vdev_id will run after
the rules it depends on, increase the vdev.rules rule number from 60
to 69.  With this change, vdev_id now provides functionality analogous
to zpool_id and zpool_layout, paving the way to retire those tools.

A defined alias takes precedence over a topology-derived name, but the
two naming methods can otherwise coexist. For example, one might name
drives in a JBOD with the sas_direct topology while naming an internal
L2ARC device with an alias.

For example, the following lines in vdev_id.conf will result in the
creation of links /dev/disk/by-vdev/{d1,d2}, each pointing to the same
target as the device link specified in the third field.

  #     by-vdev
  #     name     fully qualified or base name of device link
  alias d1       /dev/disk/by-id/wwn-0x5000c5002de3b9ca
  alias d2       wwn-0x5000c5002def789e

Also perform some minor vdev_id cleanup, such as removal of the unused
-s command line option.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #981
2012-12-03 14:04:47 -08:00
Cyril Plisko
4588bf5701 Make zpool attach -o ashift=... actually work
Commit df83110856 missed update to
getopt() call, while delivering all the rest. This commit adds
"o" to getopt().

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #566
2012-11-30 13:50:26 -08:00
Cyril Plisko
38b344d22a vdev_id fails to handle complex device topologies
While expanding positional parameters shell requires non-single
digits to be enclosed in braces. When the SAS topology is
non-trivial the number of positional parameters generated internally
by vdev_id script (using set -- ...) easily crosses single digit limit
and vdev_id fails to generate links.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1119
2012-11-29 13:07:47 -08:00
Ned Bass
a6ef9522ea Make vdev_id POSIX sh compatible
Full bash may not be available in all environments where udev helpers
run, such as in an initial ramdisk.  To avoid breakage in this case,
remove use of bash-specific features such as variable arrays and the
`declare' keyword from the vdev_id script.

Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #870
2012-11-27 14:23:22 -08:00
nordaux
33364b15d3 mount.zfs: canonicalize mount point for mtab
Canonicalize the mount point passed to the mount.zfs helper.
This way a clean path is always added to mtab which ensures
the umount can properly locate and remove the entry.

Test case:
$ mkdir /mnt/foo
$ mount -t zfs zpool/foo /mnt/../mnt/foo////
$ umount /mnt/foo
$ cat /etc/mtab | grep zpool/foo
zpool/foo /mnt/../mnt/foo//// zfs rw 0 0

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #573
2012-11-15 14:28:52 -08:00
Cyril Plisko
df83110856 Add "-o ashift" to zpool add and zpool attach
When adding devices to an existing pool "ashift" property is
auto-detected.  However, if this property was overridden at
the pool creation time (i.e. zpool create -o ashift=12 tank ...)
this may not be what the user wants.  This commit lets the user
specify the value of "ashift" property to be used with newly
added drives. For example,

    zpool add -o ashift=12 tank disk1
    zpool attach -o ashift=12 tank disk1 disk2

Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #566
2012-11-15 11:06:14 -08:00
George Wilson
32a9872bba Illumos #2671: zpool import should not fail if vdev ashift has increased
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

Refererces to Illumos issue:
      https://www.illumos.org/issues/2671

This patch has been slightly modified from the upstream Illumos
version.  In the upstream implementation a warning message is
logged to the console.  To prevent pointless console noise this
notification is now posted as a "ereport.fs.zfs.vdev.bad_ashift"
event.

The event indicates a non-optimial (but entirely safe) ashift
value was used to create the pool.  Depending on your workload
this may impact pool performance.  Unfortunately, the only way
to correct the issue is to recreate the pool with a new ashift.

NOTE: The unrelated fix to the comment in zpool_main.c appears
in the upstream commit and was preserved for consistnecy.

Ported-by: Cyril Plisko <cyril.plisko@mountall.com>
Reworked-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #955
2012-11-15 11:05:59 -08:00
Brian Behlendorf
e8fd45a0f9 Add ddt_object_count() error handling
The interface for the ddt_zap_count() function assumes it can
never fail.  However, internally ddt_zap_count() is implemented
with zap_count() which can potentially fail.  Now because there
was no way to return the error to the caller a VERIFY was used
to ensure this case never happens.

Unfortunately, it has been observed that pools can be damaged in
such a way that zap_count() fails.  The result is that the pool can
not be imported without hitting the VERIFY and crashing the system.

This patch reworks ddt_object_count() so the error can be safely
caught and returned to the caller.  This allows a pool which has
be damaged in this way to be safely rewound for import.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #910
2012-10-29 08:57:45 -07:00
Brian Behlendorf
eac4720465 Allow 'zpool replace' to use short device names
The 'zpool replace' command would fail when given a short name
because unlike on other platforms the short name cannot be
deterministically expanded to a single path.  Multiple path
prefixes must be checked and in addition the partition suffix
for whole disks is determined by the prefix.

To handle this complexity a zfs_strcmp_pathname() function was
added which takes either a short or fully qualified device name.
Short names will be expanded using the prefixes in the default
import search path, or the ZPOOL_IMPORT_PATH environment variable
if it's defined.  All posible expansions are then compared against
the comparison path.  Care is taken to strip redundant slashes to
ensure legitimate matches are not missed.

In the context of this work the existing zfs_resolve_shortname()
function was extended to consider the ZPOOL_IMPORT_PATH when set.
The zfs_append_partition() interface was also simplified to take
only a single buffer.

The vast majority of these changes rework existing Linux specific
code which was originally written to accomidate udev.  However,
there is some minimal cleanup which removes Illumos specific code.
This was done to improve readability but the basic flow and intent
of the upstream code was maintained.

These changes are the logical conclusion of the previos work to
adjust the 'zpool import' search behavior, see commit 44867b6a.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #544
Closes #976
2012-10-22 08:45:58 -07:00
Brian Behlendorf
26099167e6 Disable ztest deadman timer
The ztest deadman timer has been causing false positives in the
testing VMs.  To make it easier to spot possible regressions
I'm disabling this timer.  The buildbot test infrastructure
will still mark ztest instances which take to long to complete
as failures.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #1018
2012-10-14 19:35:09 -07:00
Brian Behlendorf
ae380cfa76 Realpath arg 2 must be a minimum of PATH_MAX
The realpath(3) function expects that when a buffer is passed
for the 'resolved_path' that it be at least PATH_MAX in length.
If it's not a buffer overflow may occur.

Therefore the passed buffer size is changed from MAXNAMELEN to
MAXPATHLEN.  We also take this opertunity to dynamically allocate
the buffer to keep it off the stack.

  warning: call to '__realpath_chk_warn' declared with attribute
  warning: second argument of realpath must be either NULL or at
  least PATH_MAX bytes long buffer [enabled by default]

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:10 -07:00
Brian Behlendorf
5be98cfe2f Verify the return value for warn_unused_result functions
Under Linux the following functions are flagged with the
attribute warn_unused_result, this triggers a warning when
ever they are used without checking the return value.

To handle this case we check the result VERIFY().  It's
better to detect this immediately on failure rather than
segfault farther down in the function.

  ../../cmd/ztest/ztest.c:6033:2: warning:
  ignoring return value of 'asprintf', declared with
  attribute warn_unused_result [-Wunused-result]
  ../../cmd/ztest/ztest.c:739:3: warning:
  ignoring return value of 'realpath', declared with
  attribute warn_unused_result [-Wunused-result]

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:10 -07:00
Brian Behlendorf
facbbe4366 Replace tempnam() with mkstemp()
The use of tempnam() is racy and it should be avoided in favor of
mkstemp().  According to the Linux tempnam(3) man page.

  "Although tempnam() generates names that are difficult to guess,
  it is nevertheless possible that between the time that tempnam()
  returns a pathname, and the time that the program opens it, another
  program might create that pathname using open(2), or create it as
  a symbolic link.  This can lead to security holes.  To avoid such
  possibilities, use the open(2) O_EXCL flag to open the  pathname.
  Or better yet, use mkstemp(3) or tmpfile(3)."

This issue was flagged by gcc.

  ztest.o: In function `setup_data_fd': cmd/ztest/ztest.c:5822:
  warning: the use of `tempnam' is dangerous, better use `mkstemp'

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:10 -07:00
Brian Behlendorf
483106eb71 Minimize ztest stack frame size
To ensure ztest behaves as similarly as possible to the kernel
implementation of ZFS we attempt to honor the kernel stack limits.
This includes keeping the individual stack frame sizes under 1K
in size.  We currently use gcc to detect and enforce this limit.

Therefore to get this building cleanly with full debugging enabled
the stack usage in the following functions has been reduced by
moving the buffer to the heap.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:09 -07:00
Etienne Dechamps
9d81146b01 Use dynamic file descriptor numbers in ztest.
Currently, ztest expects to get 3 and 4 as the file descriptors for
data and random files, respectively. This is quite fragile and breaks
easily if ztest is run with these file descriptors already opened
(e.g. in a complex shell script).

This patch fixes the issue by removing the assumptions on the file
descriptor numbers that open() returns.

For the random file (/dev/urandom), the new code doesn't rely on a
shared file descriptor; instead, it reopens the file in the child.

For the data file, the new code writes the file descriptor number into
a "ZTEST_FD_DATA" environment variable so that it can be recovered
after the execv() call.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:19:09 -07:00
Christopher Siden
22257dc0d5 Fix mmap() usage in ztest.
illumos/illumos-gate@ad135b5d64
Illumos changeset: 13700:2889e2596bd6

Note that this is only a partial port of the aforementioned Illumos
changeset.

Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <gwilson@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Dan Kruchinin <dan.kruchinin@gmail.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

Ported to zfsonlinux by: Etienne Dechamps <etienne.dechamps@ovh.net>
2012-10-04 13:19:09 -07:00
Chris Siden
c242c188fd Illumos #1950: ztest backwards compatibility testing option.
illumos/illumos-gate@420dfc9585
Illumos changeset: 13571:a5771a96228c

1950 ztest backwards compatibility testing option

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Eric Schrock <eric.schrock@delphix.com>

Ported-by: Etienne Dechamps <etienne.dechamps@ovh.net>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-10-04 13:18:53 -07:00
Etienne Dechamps
d135245791 Temporarily disable the reguid test.
Currently, ztest fails with the following error:

    error: Pool 'ztest' has encountered an uncorrectable I/O failure
    and the failure mode property for this pool is set to panic.

We know how to fix it (see issue #939), but it may take some time
before we get around to merging the fix, which has some heavy
dependencies.

In the mean time, it is not ideal to be unable to use ztest just
because of a small isolated issue, so this patch works around the
problem by disabling the reguid test. This is just a temporary hack to
keep ztest usable.

The reguid test will be enabled again when the proper fix is merged.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #997
2012-10-03 13:59:02 -07:00
Etienne Dechamps
6aec1cd5a6 Fix ztest vdev file paths.
Currently, in several instances (but not all), ztest generates vdev
file paths using a statement similar to this:

    snprintf(path, sizeof (path), ztest_dev_template, ...);

This worked fine until 40b84e7aec, which
changed path to be a pointer to the heap instead of an array allocated
on the stack. Before this change, sizeof(path) would return the size of
the array; now, it returns the size of the pointer instead.

As a result, the aforementioned sprintf statement uses the wrong size
and truncates the vdev file path to the first 4 or 8 bytes (depending
on the architecture). Typically, with default settings, the file path
will become "/tmp/zt" instead of "/test/ztest.XXX".

This issue only exists in ztest_vdev_attach_detach() and
ztest_fault_inject(), which explains why ztest doesn't fail right away.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
2012-10-03 13:32:48 -07:00
Etienne Dechamps
0aebd4f9e3 Create threads in detached state in userspace.
Currently, thread_create(), when called in userspace, creates a
joinable (i.e. not detached thread). This is the pthread default.

Unfortunately, this does not reproduce kthreads behavior (kthreads
are always detached). In addition, this contradicts the original
Solaris code which creates userspace threads in detached mode.

These joinable threads are never joined, which leads to a leakage of
pthread thread objects ("zombie threads"). This in turn results in
excessive ressource consumption, and possible ressource exhaustion in
extreme cases (e.g. long ztest runs).

This patch fixes the issue by creating userspace threads in detached
mode. The only exception is ztest worker threads which are meant to be
joinable.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #989
2012-10-03 13:32:48 -07:00
Bill Pijewski
37abac6d55 Illumos #2703: add mechanism to report ZFS send progress
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/2703

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-19 13:39:06 -07:00
Chris Siden
1bd201e70d Illumos #1948: zpool list should show more detailed pool info
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Albert Lee <trisk@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Eric Schrock <eric.schrock@delphix.com>

References:
  https://www.illumos.org/issues/1948

Ported by:	Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #685
2012-09-19 13:39:05 -07:00
Richard Lowe
dd4769adc0 Illumos #2088 zdb could use a reasonable manual page
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Steve Gonczi <gonczi@comcast.net>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Garrett D'Amore <garrett@damore.org>

References:
      https://www.illumos.org/issues/2088

Ported by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #682
2012-09-18 09:09:13 -07:00
Brian Behlendorf
44867b6d6e Improve zpool import search behavior
The goal of this change is to make 'zpool import' prefer to use
the peristent /dev/mapper or /dev/disk/by-* paths.  These are far
preferable to the devices in /dev/ whos names are not persistent
and are determined by the order in which a device is detected.

This patch improves things by changing the default search path from
just to the top level /dev/ directory to (in order):

  /dev/disk/by-vdev   - Custom rules, use first if they exist
  /dev/disk/zpool     - Custom rules, use first if they exist
  /dev/mapper         - Use multipath devices before components
  /dev/disk/by-uuid   - Single unique entry and persistent
  /dev/disk/by-id     - May be multiple entries and persistent
  /dev/disk/by-path   - Encodes physical location and persistent
  /dev/disk/by-label  - Custom persistent labels
  /dev                - UNSAFE device names will change

The default search path can be overriden by setting the
ZPOOL_IMPORT_PATH environment variable.  This must be a colon
delimited list of paths which are searched for vdevs.  If the
'zpool import -d' option is specified only those listed paths
will be searched.

Finally, when multiple paths to the same device are found.  If one
of the paths is an exact match for the path used last time to import
the pool it will be used.  When there are no exact matches the
prefered path will be determined by the provided search order.

This means you can still import a pool and force specific names by
providing the -d <path> option.  And the prefered names will persist
as long as those paths exist on your system.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #965
2012-09-17 13:49:07 -07:00
Cyril Plisko
8e8e7f35b7 Fix zdb printf format string for ZIL data blocks
Without this fix the zdb printouts of ZIL data blocks look full of FF
due to printf() handling its arguments as int by default.

Here is the output before the fix

                TX_WRITE            len   4136, txg 1093817, seq 149231
                        foid 4242, offset 0, length f68
                        G FFFFFF8EFFFFFF87FFFFFF91FFFFFFCC 1c
FFFFFFAFFFFFFFC9FFFFFFBAZ FFFFFFC3

And the same after the fix

                TX_WRITE            len   4136, txg 1093817, seq 149231
                        foid 4242, offset 0, length f68
                        G 8E8791CC 1cAFC9BAZ C3

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #962
2012-09-13 09:02:12 -07:00
Cyril Plisko
af909a1089 Illumos #3064: usr/src/cmd/zpool/zpool_main.c misspells "successful"
Reviewed by: Andrew Stormont <Andrew.Stormont@nexenta.com>
Reviewed by: Kartik Mistry <kartik.mistry@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>

References:
      https://www.illumos.org/issues/3064

Signed-off-by: Cyril Plisko <cyril.plisko@mountall.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-11 10:19:50 -07:00
Etienne Dechamps
b815ff9a8f Silence "setting dataset to sync always" message in ztest.
ztest outputs a message when testing sync=always no matter what the
verbosity level is. There is no point outputting this message for low
verbosity levels.

With this patch the message is only displayed at verbosity level 5 or
above. The result is less output pollution.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #951
2012-09-10 10:55:44 -07:00
Brian Behlendorf
1ecc6d1265 Add zstreamdump .gitignore
When zstreamdump was merged in commit b79fc3f we failed to add
the needed .gitignore file.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-09-06 14:23:11 -07:00
Etienne Dechamps
ba7dbeb22e Add libnvpair to mount_zfs dependencies
Commit e6f290535c added libzpool to
the mount_zfs dependencies.  This brought in the nvpair symbols
which are used by libzpool.  To resolve this include the libnvpair
library for mount_zfs even though mount_zfs doesn't directly
require any of these symbols.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #926
2012-09-02 15:36:09 -07:00
Martin Matuska
b79fc3fea9 Add zstreamdump(8) command to examine ZFS send streams.
Obtained from: illumos-gate revision 11935:538c866aaac6
Source: ssh://anonhg@hg.illumos.org/illumos-gate

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #905
2012-09-02 14:54:27 -07:00
Etienne Dechamps
e6f290535c Fix mount_zfs dependency on libzpool.
mount_zfs depends on libzpool for zfs_prop_written since
330d06f90d. Unfortunately, the Makefile
for mount_zfs has not been modified to reflect this. As a result,
libtool doesn't know about the dependency, which may result in the wrong
libzpool being used during the build (e.g. the libzpool from the system
instead of the libzpool from the build directory).

This patch adds the dependency to fix the issue.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Fixes #909.
2012-08-30 16:06:46 -07:00
Brian Behlendorf
ca8b5af89d Remove autotools products
Remove all of the generated autotools products from the repository
and update the .gitignore files accordingly.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #718
2012-08-27 11:47:44 -07:00
Christopher Siden
e956d65106 Illumos #1796, #2871, #2903, #2957
1796 "ZFS HOLD" should not be used when doing "ZFS SEND" from a read-only pool
2871 support for __ZFS_POOL_RESTRICT used by ZFS test suite
2903 zfs destroy -d does not work
2957 zfs destroy -R/r sometimes fails when removing defer-destroyed snapshot
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Eric Schrock <Eric.Schrock@delphix.com>

References:
  https://www.illumos.org/issues/1796
  https://www.illumos.org/issues/2871
  https://www.illumos.org/issues/2903
  https://www.illumos.org/issues/2957

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-23 10:40:02 -07:00
Eric Schrock
db49968e5c Illumos #2635: 'zfs rename -f' to perform force unmount
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <George.Wilson@delphix.com>
Reviewed by: Bill Pijewski <wdp@joyent.com>
Reviewed by: Richard Elling <richard.elling@richardelling.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/2635

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #717
2012-08-23 10:39:43 -07:00
Andrew Stormont
e346ec25af Illumos #1936: add support for "-t <datatype>" argument to zfs get
Reviewed by: Kartik Mistry <kartik@nexenta.com>
Reviewed by: Dan McDonald <danmcd@nexenta.com>
Reviewed by: Richard Elling <richard.elling@gmail.com>
Reviewed by: Garrett D'Amore <garrett@damore.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1936

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #681
2012-08-23 10:35:59 -07:00
Alexander Eremin
684e8c0643 Illumos #1726: Removal of pyzfs broke delegation for volumes
Reviewed by: Andrew Stormont <andyjstormont@googlemail.com>
Reviewed by: Garrett D'Amore <garrett@nexenta.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Garrett D'Amore <garrett@nexenta.com>

References:
  https://www.illumos.org/issues/1726

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-23 10:35:37 -07:00
Alexander Eremin
79e722432f Illumos #1977: zfs allow arguments not parsed correctly after pyzfs removal
Reviewed by: Garrett D'Amore <garrett.damore@gmail.com>
Reviewed by: Albert Lee <trisk@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1977

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
2012-08-23 10:21:04 -07:00
Dan McDonald
d96eb2b153 Illumos #1693: persistent 'comment' field for a zpool
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Eric Schrock <eric.schrock@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1693

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #678
2012-08-08 11:49:37 -07:00
Etienne Dechamps
ee5fd0bb80 Set zvol discard_granularity to the volblocksize.
Currently, zvols have a discard granularity set to 0, which suggests to
the upper layer that discard requests of arbirarily small size and
alignment can be made efficiently.

In practice however, ZFS does not handle unaligned discard requests
efficiently: indeed, it is unable to free a part of a block. It will
write zeros to the specified range instead, which is both useless and
inefficient (see dnode_free_range).

With this patch, zvol block devices expose volblocksize as their discard
granularity, so the upper layer is aware that it's not supposed to send
discard requests smaller than volblocksize.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #862
2012-08-07 14:55:31 -07:00
Matthew Ahrens
330d06f90d Illumos #1644, #1645, #1646, #1647, #1708
1644 add ZFS "clones" property
1645 add ZFS "written" and "written@..." properties
1646 "zfs send" should estimate size of stream
1647 "zfs destroy" should determine space reclaimed by
     destroying multiple snapshots
1708 adjust size of zpool history data

References:
  https://www.illumos.org/issues/1644
  https://www.illumos.org/issues/1645
  https://www.illumos.org/issues/1646
  https://www.illumos.org/issues/1647
  https://www.illumos.org/issues/1708

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  This change has reordered
all of the new ioctl()s to the end of the list.  This should
help minimize this issue in the future.

Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Albert Lee <trisk@opensolaris.org>
Approved by: Garrett D'Amore <garret@nexenta.com>

Ported by: Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #826
Closes #664
2012-07-31 09:25:30 -07:00
Brian Behlendorf
c171ea71bb Allow '-o remount' for non-legacy datasets
This is done for compatibility with existing Linux infrastructure.

In particular, when using zfs as a root filesystem there are init
scripts which as part of shutdown remount root read-only.  Also,
the new systemd infrastructure being used by Fedora expects to be
able to remount a file system read-write.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #847
2012-07-30 15:58:02 -07:00
Richard Yao
739a1a82e0 Linux 3.5 compat, end_writeback() changed to clear_inode()
The end_writeback() function was changed by moving the call to
inode_sync_wait() earlier in to evict().   This effecitvely changes
the ordering of the sync but it does not impact the details of
the zfs implementation.

However, as part of this change end_writeback() was renamed to
clear_inode() to reflect the new semantics.  This change does
impact us and clear_inode() now maps to end_writeback() for
kernels prior to 3.5.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #784
2012-07-23 12:29:36 -07:00
Richard Yao
ea1fdf46e2 Linux 3.5 compat, iops->truncate_range() removed
The vmtruncate_range() support has been removed from the kernel in
favor of using the fallocate method in the file_operations table.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
2012-07-23 12:29:32 -07:00
Richard Yao
756c3e5a9c Linux 3.5 compat, eops->encode_fh() takes inodes
The export_operations member ->encode_fh() has been updated to
take both the child and parent inodes.  This interface used to
take the child dentry and a bool describing if the parent is needed.

NOTE: While updating this code I noticed that we do not currently
cleanly handle the case where we're passed a connectable parent.
This code should be audited to make sure we're doing the right thing.

Signed-off-by: Richard Yao <ryao@cs.stonybrook.edu>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #784
2012-07-23 12:29:23 -07:00
Etienne Dechamps
b5a28807cd Move partition scanning from userspace to module.
Currently, zpool online -e (dynamic vdev expansion) doesn't work on
whole disks because we're invoking ioctl(BLKRRPART) from userspace
while ZFS still has a partition open on the disk, which results in
EBUSY.

This patch moves the BLKRRPART invocation from the zpool utility to the
module. Specifically, this is done just before opening the device in
vdev_disk_open() which is called inside vdev_reopen(). This requires
jumping through some hoops to get to the disk device from the partition
device, and to make sure we can still open the partition after the
BLKRRPART call.

Note that this new code path is triggered on dynamic vdev expansion
only; other actions, like creating a new pool, are unchanged and still
call BLKRRPART from userspace.

This change also depends on API changes which are available in 2.6.37
and latter kernels.  The build system has been updated to detect this,
but there is no compatibility mode for older kernels.  This means that
online expansion will NOT be available in older kernels.  However, it
will still be possible to expand the vdev offline.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #808
2012-07-17 09:17:31 -07:00
Garrett D'Amore
3541dc6d02 Illumos #1748: desire support for reguid in zfs
Reviewed by: George Wilson <gwilson@zfsmail.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Alexander Stetsenko <ams@nexenta.com>
Approved by: Richard Lowe <richlowe@richlowe.net>

References:
  https://www.illumos.org/issues/1748

This commit modifies the user to kernel space ioctl ABI.  Extra
care should be taken when updating to ensure both the kernel
modules and utilities are updated.  If only the user space
component is updated both the 'zpool events' command and the
'zpool reguid' command will not work until the kernel modules
are updated.

Ported by:     Martin Matuska <martin@matuska.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #665
2012-07-11 13:08:56 -07:00
Pawel Jakub Dawidek
0cee24064a Speed up 'zfs list -t snapshot -o name -s name'
FreeBSD #xxx:  Dramatically optimize listing snapshots when user
requests only snapshot names and wants to sort them by name, ie.
when executes:

  # zfs list -t snapshot -o name -s name

Because only name is needed we don't have to read all snapshot
properties.

Below you can find how long does it take to list 34509 snapshots
from a single disk pool before and after this change with cold and
warm cache:

    before:

        # time zfs list -t snapshot -o name -s name > /dev/null
        cold cache: 525s
        warm cache: 218s

    after:

        # time zfs list -t snapshot -o name -s name > /dev/null
        cold cache: 1.7s
        warm cache: 1.1s

NOTE: This patch only appears in FreeBSD.  If/when Illumos picks up
the change we may want to drop this patch and adopt their version.
However, for now this addresses a real issue.

Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #450
2012-06-14 09:49:04 -07:00
Brian Behlendorf
fe2fc8f6d3 Workaround for failing zvol_id
This is not a proper fix.  It is just a workaround for the stack
smashing detected by gcc in zvol_id.  We simply disable the gcc
stack protector for now when building the zvol_id udev helper.
Once the root cause is resolved this patch should be reverted.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issues #569
2012-06-13 11:25:17 -07:00