Lay the initial ground work for a include/linux/ compatibility
directory. This was less critical in the past because the bulk
of the ZFS code consumes the Solaris API via the SPL. This API
was stable and the bulk Linux API differences were handled in
the SPL.
However, with the addition of a full Posix layer written directly
against the Linux APIs we are going to need more compatibility
code. It makes sense that all this code should be cleanly located
in one place. Subsequent patches should move the existing zvol
and vdev_disk compatibility code in to this directory.
This code originates in OpenSolaris and was modified by KQ Infotech
to be compatible with Linux. While supporting uios in the short
term is useful to get something working this is not an abstraction
we want to keep. This code is expected to be short lived and
removed as soon as all the remaining uio based APIs and updated.
The zfs acl code makes use of the two OpenSolaris helper functions
acl_trivial_access_masks() and ace_trivial_common(). Since they are
only called from zfs_acl.c I've brought them over from OpenSolaris
and added them as static function to this file. This way I don't
need to reimplement this functionality from scratch in the SPL.
Long term once I take a more careful look at the acl implementation
it may be the case that these functions really aren't needed. If
that turns out to be the case they can then be removed.
Remove unneeded bootfs functions. This support shouldn't be required
for the Linux port, and even if it is it would need to be reworked
to integrate cleanly with Linux.
Certain NFS/SMB share functionality is not yet in place. These
functions used to be wrapped with the generic HAVE_ZPL to prevent
them from being compiled. I still don't want them compiled but
I'm working toward eliminating the use of HAVE_ZPL. So I'm just
renaming the wrapper here to HAVE_SHARE. They still won't be
compiled until all the share issues are worked through. Share
support is the last missing piece from zfs_ioctl.c.
The zfs_check_global_label() function is part of the HAVE_MLSLABEL
support which was previously commented out by a HAVE_ZPL check.
Since we're still deciding what to do about mls labels wrap it
with the preexisting macro to keep it compiled out.
Unlike Solaris the Linux implementation embeds the inode in the
znode, and has no use for a vnode. So while it's true that fragmention
of the znode cache may occur it should not be worse than any of the
other Linux FS inode caches. Until proven that this is a problem it's
just added complexity we don't need.
Roll the version forward to 0.6.0. While no major changes
really warrant this I want to keep the version in step with
ZFS for now which is the only SPL consumer.
These functions were dropped originally because I felt they would
need to be rewritten anyway to avoid using uios. However, this
patch readds then with they dea they can just be reworked and
the uio bits dropped.
ZFS even under Solaris does not strictly require libshare to be
available. The current implementation attempts to dlopen() the
library to access the needed symbols. If this fails libshare
support is simply disabled.
This means that on Linux we only need the most minimal libshare
implementation. In fact just enough to prevent the build from
failing. Longer term we can decide if we want to implement a
libshare library like Solaris. At best this would be an abstraction
layer between ZFS and NFS/SMB. Alternately, we can drop libshare
entirely and directly integrate ZFS with Linux's NFS/SMB.
Finally the bare bones user-libshare.m4 test was dropped. If we
do decide to implement libshare at some point it will surely be
as part of this package so the check is not needed.
By design the zfs utility is supposed to handle mounting and unmounting
a zfs filesystem. We could allow zfs to do this directly. There are
system calls available to mount/umount a filesystem. And there are
library calls available to manipulate /etc/mtab. But there are a
couple very good reasons not to take this appraoch... for now.
Instead of directly calling the system and library calls to (u)mount
the filesystem we fork and exec a (u)mount process. The principle
reason for this is to delegate the responsibility for locking and
updating /etc/mtab to (u)mount(8). This ensures maximum portability
and ensures the right locking scheme for your version of (u)mount
will be used. If we didn't do this we would have to resort to an
autoconf test to determine what locking mechanism is used.
The downside to using mount(8) instead of mount(2) is that we lose
the exact errno which was returned by the kernel. The return code
from mount(8) provides some insight in to what went wrong but it
not quite as good. For the moment this is translated as a best
guess in to a errno for the higher layers of zfs.
In the long term a shared library called libmount is under development
which provides a common API to address the locking and errno issues.
Once the standard mount utility has been updated to use this library
we can then leverage it. Until then this is the only safe solution.
http://www.kernel.org/pub/linux/utils/util-linux/libmount-docs/index.html
Previously we would ASSERT in cv_destroy() if it was ever called
with active waiters. However, I've now seen several instances in
OpenSolaris code where they do the following:
cv_broadcast();
cv_destroy();
This leaves no time for active waiters to be woken up and scheduled
and we trip the ASSERT. This has not been observed to be an issue
on OpenSolaris because their cv_destroy() basically does nothing.
They still do run the risk of the memory being free'd after the
cv_destroy() and hitting a bad paging request. But in practice
this race is so small and unlikely it either doesn't happen, or
is so unlikely when it does happen the root cause has not yet been
identified.
Rather than risk the same issue in our code this change updates
cv_destroy() to block until all waiters have been woken and
scheduled. This may take some time because each waiter must
acquire the mutex.
This change may have an impact on performance for frequently
created and destroyed condition variables. That however is a price
worth paying it avoid crashing your system. If performance issues
are observed they can be addressed by the caller.
Recently helper functions were added to libzfs_util to load a kernel
module or execute a process. Initially this functionality was limited
to libzfs but it has become clear there will be other consumers. This
change opens up the interface so it may be used where appropriate.
For the moment, the only advantage in registering a umount helper
would be to automatically unshare a zfs filesystem. Since under
Linux this would be unexpected (but nice) behavior there is no
harm in disabling it.
This is desirable because the 'zfs unmount' path invokes the system
umount. This is done to ensure correct mtab locking but has the
side effect that the umount.zfs helper would be called if it exists.
By default this helper calls back in to zfs to do the unmount on
Solaris which we don't want under Linux.
Once libmount is available and we have a safe way to correctly
lock and update the /etc/mtab file we can reconsider the need
for a umount helper. Using libmount is the prefered solution.
While not strictly required to mount a zfs filesystem using a
mount helper has certain advantages.
First, we need it if we want to honor the mount behavior as found
on Solaris. As part of the mount we need to validate that the
dataset has the legacy mount property set if we are using 'mount'
instead of 'zfs mount'.
Secondly, by using a mount helper we can automatically load the
zpl kernel module. This way you can just issue a 'mount' or
'zfs mount' and it will just work.
Finally, it gives us common hook in user space to add any zfs
specific mount options we might want. At the moment we don't
have any but now the infrastructure is at least in place.
If libselinux is detected on your system at configure time link
against it. This allows us to use a library call to detect if
selinux is enabled and if it is to pass the mount option:
"context=\"system_u:object_r:file_t:s0"
For now this is required because none of the existing selinux
policies are aware of the zfs filesystem type. Because of this
they do not properly enable xattr based labeling even though
zfs supports all of the required hooks.
Until distro's add zfs as a known xattr friendly fs type we
must use mntpoint labeling. Alternately, end users could modify
their existing selinux policy with a little guidance.
Simply add the policy function wrappers. They are completely
non-functional and always return that everything is OK, but once
again they simplify compilation of dependent packages for now.
These can/should be removed once the security policy of the
dependent application is completely understood and intergrade
as appropriate with Linux.
Dependent packages require the following missing headers to
simplify compilation. The headers are basically just stubbed
out with minimal content required.
The following flags are use to get the proper mask when getting
and setting ACLs. I'm hopeful this can all largely go away at
some point.
We also add a define for the maximum number of ACL entries.
MAX_ACL_ENTRIES is used as the maximum number of entries for
each type.
For Linux the maximum uid can vary depending on how your kernel
is built. The Linux kernel still can be compiled with 16 but uids
and gids, although I'm not aware of a major distribution which does
this (maybe an embedded one?). Given that caviot it is reasonably
safe to define the MAXUID as 2147483647.
This patch simply removes the place holder vfs_t type and includes
some generic Linux VFS headers. It also makes some minor fid_t
additions for compatibility.
Previously these were defined to noops but rather than give
the misleading impression that these are actually implemented
I'm removing the type entirely for clarity.
Both of these caches were previously allowed to be either a
vmem or kmem cache based on the size of the object involved.
Since we know the object won't be to large and performce is
much better for a kmem cache for them to be kmem backed.
The cv_timedwait() function by definition must wait unconditionally
for cv_signal()/cv_broadcast() before waking. This causes processes
to go in the D state which increases the load average. The load
average is the summation of processes in D state and run queue.
To avoid this it can be desirable to sleep interruptibly. These
processes do not count against the load average but may be woken by
a signal. It is up to the caller to determine why the process
was woken it may be for one of three reasons.
1) cv_signal()/cv_broadcast()
2) the timeout expired
3) a signal was received
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Create spl_inode_lock/spl_inode_unlock compability macros to simply
access to the inode mutex/sem. This avoids the need to have to ugly
up the code with the required #define's at every call site. At the
moment the SPL only uses this in one place but higher layers can
benefit from the macro.
During a rename we need to be careful to destroy and create a
new minor for the ZVOL _only_ if the rename succeeded. The previous
code would both destroy you minor device unconditionally, it would
also fail to create the new minor device on success.
These compiler warnings were introduced when code which was
previously #ifdef'ed out by HAVE_ZPL was re-added for use
by the posix layer. All of the following changes should be
obviously correct and will cause no semantic changes.
For while now mkdirp has been built as part of libspl however
the protoype was never added to libgen.h. This went unnoticed
until enabling the mount support which uses mkdirp().
The issue is that cv_timedwait() sleeps uninterruptibly to block signals
and avoid waking up early. Under Linux this counts against the load
average keeping it artificially high. This change allows the arc to
sleep interruptibly which mean it may be woken up early due to a signal.
Normally this means some extra care must be taken to handle a potential
signal. But for the arcs usage of cv_timedwait() there is no harm in
waking up before the timeout expires so no extra handling is required.
Specifically, this fixes the two following errors in zdb when a pool
is composed of block devices:
1) 'Value too large for defined data type' when running 'zdb <dataset>'.
2) 'character device required' when running 'zdb -l <block-device>'.
Signed-off-by: Ricardo M. Correia <ricardo.correia@oracle.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Refresh the autogen.sh products based on the versions which are
installed by default in the GA RHEL6.0 release.
autoconf (GNU Autoconf) 2.63
automake (GNU automake) 1.11.1
ltmain.sh (GNU libtool) 2.2.6b
To validate the correct behavior of the TSD interfaces it's
important that we add a regression test. This test is designed
to minimally exercise the fundamental TSD behavior, it does not
attempt to validate all potential corner cases.
The test will first create 32 keys via tsd_create() and register
a common destructor. Next 16 wait threads will be created each
of which set/verify a random value for all 32 keys, then block
waiting to be released by the control thread. Meanwhile the
control thread verifies that none of the destructors have been
run prematurely.
The next phase of the test is to create 16 exit threads which
set/verify a random value for all 32 keys. They then immediately
exit. This is is designed to verify tsd_exit() which will be
called via thread_exit(). This must result in all registered
destructors being run and the memory for the tsd being free'd.
After this tsd_destroy() is verified by destroying all 32 keys.
Once again we must see the expected number of destructors run
and the tsd memory free'd. At this point the blocked threads
are released and they exit calling tsd_exit() which should do
very little since all the tsd has already been destroyed.
If this all goes off without a hitch the test passes. To ensure
no memory has been leaked, I have manually verified that after
spl module unload no memory is reported leaked.
Thread specific data has implemented using a hash table, this avoids
the need to add a member to the task structure and allows maximum
portability between kernels. This implementation has been optimized
to keep the tsd_set() and tsd_get() times as small as possible.
The majority of the entries in the hash table are for specific tsd
entries. These entries are hashed by the product of their key and
pid because by design the key and pid are guaranteed to be unique.
Their product also has the desirable properly that it will be uniformly
distributed over the hash bins providing neither the pid nor key is zero.
Under linux the zero pid is always the init process and thus won't be
used, and this implementation is careful to never to assign a zero key.
By default the hash table is sized to 512 bins which is expected to
be sufficient for light to moderate usage of thread specific data.
The hash table contains two additional type of entries. They first
type is entry is called a 'key' entry and it is added to the hash during
tsd_create(). It is used to store the address of the destructor function
and it is used as an anchor point. All tsd entries which use the same
key will be linked to this entry. This is used during tsd_destory() to
quickly call the destructor function for all tsd associated with the key.
The 'key' entry may be looked up with tsd_hash_search() by passing the
key you wish to lookup and DTOR_PID constant as the pid.
The second type of entry is called a 'pid' entry and it is added to the
hash the first time a process set a key. The 'pid' entry is also used
as an anchor and all tsd for the process will be linked to it. This
list is using during tsd_exit() to ensure all registered destructors
are run for the process. The 'pid' entry may be looked up with
tsd_hash_search() by passing the PID_KEY constant as the key, and
the process pid. Note that tsd_exit() is called by thread_exit()
so if your using the Solaris thread API you should not need to call
tsd_exit() directly.
